Texas Instruments

THS1209IDA - 12-Bit 8 MSPS Dual-Channel ADC | TI

MPN: THS1209IDA ✓ Aktif
Single-supply operation Vdss 32-pin TSSOP (DA) Package
MOQ: 1 |

THS1209IDA Ringkasan

Texas Instruments THS1209IDA is a 12-bit, dual-channel, 8 MSPS simultaneous-sampling analog-to-digital converter housed in a 32-pin TSSOP package. The device combines two independent high-speed sampling channels with pipelined conversion, a DSP or microprocessor interface, channel autoscan, and single-supply operation. According to the Texas Instruments THS1209 product page, its speed, resolution, bandwidth, and low-power design target radar, imaging, communications, and high-speed data-acquisition systems.

An analog-to-digital converter is an ADC, a data-acquisition IC that converts continuous analog voltage signals into digital codes for processing, transmission, or storage. The THS1209 belongs to the pipeline-ADC family within the broader analog and mixed-signal semiconductor hierarchy. Simultaneous sampling is especially important when two input signals must be captured at the same instant, because it prevents timing skew from creating differences between channels.

Key features include 12-bit resolution, two analog input channels, and an aggregate conversion rate of 8 MSPS. The converter uses a pipelined architecture and supports both single-ended and differential input configurations. Channel autoscan allows the digital interface to acquire multiple channels systematically, while the DSP or microprocessor interface supports integration with external control and data-processing hardware. These capabilities provide a useful balance of channel count, resolution, throughput, and integration complexity.

The THS1209 is a CMOS, low-power device intended for single-supply operation. Its industrial temperature grade extends from -40°C to +85°C, making it suitable for industrial and commercial equipment with extended environmental requirements. The DA package is a 32-pin TSSOP with gull-wing leads, a surface-mount format that supports compact PCB layouts while exposing enough pins for dual analog inputs, digital data, control signals, clocking, and power connections.

Typical applications include radar and observation systems, medical imaging, industrial vibration monitoring, communications equipment, and simultaneous acquisition of analog sensor outputs. In a radar receiver, paired channels can capture reference and measurement signals at the same sampling instant. In an imaging system, simultaneous conversion supports coherent acquisition of multiple detectors. In communications hardware, the 8 MSPS throughput provides conversion performance for intermediate-frequency or envelope-related signal chains.

The main design consideration is preserving the accuracy of high-speed differential inputs. Use the manufacturer’s recommended input network, reference circuitry, decoupling, and controlled clock implementation to minimize distortion and timing errors. Pay particular attention to source impedance, analog trace routing, return paths, and separation between sensitive input nodes and digital switching signals.

This page combines the manufacturer specifications, sourcing guidance, drop-in-replacement assessment, comparison criteria, and practical PCB guidance needed to evaluate the THS1209IDA for a dual-channel high-speed acquisition design.

Alternatif penggantian untuk THS1209IDA — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian THS1209IDA (sama faktor bentuk dan footprint) — berbeda di dalam Architecture, Input Configuration.

Texas Instruments
Architecture: Pipelined ADC with simultaneous sampling
Input Configuration: 2 single-ended or 1 differential
Bandingkan dengan THS1209IDA →

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

THS1209IDA Rating Maksimal & Karakteristik Listrik

Resolusi 12 bit
Conversion Rate 8 MSPS
Number of Input Channels 2
Sampling Method Simultaneous sampling
Architecture Pipelined ADC
Input Configuration Single-ended or differential
Digital Interface DSP or microprocessor interface
Channel Multiplexing Channel autoscan
Supply Type Single-supply operation
Process Technology CMOS
Power Class Low-power ADC
Rentang Suhu Kerja -40°C to +85°C
Temperature Grade Industrial
Paket 32-pin TSSOP (DA)
Package Width 6.10 mm
Tipe Mounting Surface mount
Lead Form Gull wing
Terminal Count 32

THS1209IDA 6.10 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk THS1209IDA (6.10 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 6.10 mm untuk THS1209IDA

Tidak ada data diatribut pin yang tersedia untuk THS1209IDA.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

THS1209IDA cocok untuk 6 aplikasis: Radar Signal Acquisition, Medical Imaging Systems, Communications Receiver, Industrial Vibration Monitoring, High-Speed Data Acquisition, Radar and Imaging Front End.

✈️

Radar Signal Acquisition

The THS1209IDA fits paired radar channels because its two 12-bit inputs are sampled simultaneously at an overall 8 MSPS rate. Simultaneous conversion helps preserve phase and timing relationships between a measurement channel and its reference signal. Place the converter behind suitable antenna and receiver front ends, then route the differential or single-ended inputs through matched conditioning networks. The 32-pin TSSOP package keeps the converter compact while providing separate access for dual-channel data, clocking, reference, control, and power. Validate input bandwidth, allowable common-mode range, and clock-jitter sensitivity against the receiver bandwidth before finalizing the acquisition chain.

💊

Medical Imaging Systems

The THS1209IDA can digitize two related medical-imaging signals at the same sampling instant, reducing temporal mismatch between channels. Its 12-bit resolution is suitable for systems that require compact acquisition hardware rather than the channel count of a large multiplexing converter. Use matched analog front ends, short input routes, and a low-noise reference network to preserve signal integrity. Because medical designs may impose additional safety, EMC, and qualification requirements, the surrounding circuit and validation process must be assessed separately from the ADC’s industrial temperature rating.

🌐

Communications Receiver

The THS1209IDA is suitable for communications receiver blocks that convert two related analog waveforms into digital data for filtering or demodulation. The 8 MSPS rate provides useful throughput, while simultaneous sampling helps maintain alignment when one channel carries a signal and the other carries timing, level, or reference information. The DSP or microprocessor interface supports integration with a digital processing chain. Designers should select input bandwidth according to the actual carrier or baseband requirements, control clock jitter, and separate sensitive analog routing from high-current digital return paths.

🏭

Industrial Vibration Monitoring

The dual-channel THS1209IDA can acquire vibration and reference measurements together, helping engineers compare sensor outputs without the timing skew introduced by sequential multiplexing. Its 8 MSPS capability covers higher-bandwidth mechanical signatures, while 12-bit resolution supports many sensor-front-end designs. Place sensor amplifiers close to the ADC inputs, maintain equal routing lengths where channel matching matters, and use the same clock and reference for both channels. Add suitable input protection and anti-alias filtering so industrial transients and out-of-band content do not compromise conversion accuracy.

🖥️

High-Speed Data Acquisition

The THS1209IDA supports compact instrumentation that must capture two analog channels at 8 MSPS through a common digital interface. It is useful for automated test equipment, bench instruments, and control systems that need simultaneous rather than multiplexed sampling. The DSP or microprocessor interface and channel-autoscan function simplify connection to a digital acquisition controller. Design the input paths with consistent source impedance, decouple supply pins according to the manufacturer recommendations, and provide a low-noise reference. At the software level, account for pipeline latency and digital-interface timing when synchronizing acquired records.

📡

Radar and Imaging Front End

The THS1209IDA can serve as the final digitization stage in radar, imaging, and coherent sensor front ends. Two simultaneous channels may represent matched detector outputs, enabling subsequent digital compensation without a timing-skew penalty between simultaneous samples. The 12-bit resolution supports balanced use of converter dynamic range when the analog front end is designed appropriately. Match input impedance and filter both channels identically, keep clock routing short, and use a clean reference arrangement. Validate gain, phase, and channel-to-channel skew across the intended input bandwidth rather than relying only on nominal conversion-rate specifications.

What are the key specifications of THS1209IDA that engineers should know?
The THS1209IDA is a 12-bit, dual-channel, 8 MSPS simultaneous-sampling pipelined ADC in a 32-pin TSSOP package. According to the Texas Instruments THS1209 product page, the device supports single-ended or differential inputs, channel autoscan, a DSP or microprocessor interface, single-supply operation, and an industrial temperature range of -40°C to +85°C. Its simultaneous-sampling architecture is particularly useful when two channels must preserve timing alignment.
Where can I download the THS1209IDA datasheet PDF?
The official THS1209 datasheet is available through the Texas Instruments THS1209 product page at https://www.ti.com/product/THS1209. That page contains the manufacturer datasheet, package information, ordering details, and lifecycle resources. The THS1209IDA corresponds to the 32-pin TSSOP DA package. Use the pin-description table and recommended application circuit in the manufacturer datasheet when assigning signals or laying out the PCB.
Where can I find the THS1209IDA pinout?
The THS1209IDA pinout is documented in the pin-configuration section of the Texas Instruments THS1209 datasheet, available from the official product page. The component uses a 32-pin TSSOP DA package, so all 32 terminals must be checked during schematic review. Pay particular attention to analog inputs, analog ground, digital ground, reference connections, clock inputs, and digital interface signals when assigning PCB nets.
What is the difference between simultaneous sampling and multiplexing in THS1209IDA?
The THS1209IDA samples its two analog channels simultaneously rather than capturing them at different times within one sampling sequence. According to the Texas Instruments THS1209 product page, this is important in radar, imaging, communications, and high-speed acquisition. Simultaneous conversion preserves the relative timing between channels, while multiplexed conversion can introduce channel-to-channel skew that matters in phase-sensitive measurements.
Can THS1209IDA be used for radar and imaging systems?
Yes, the THS1209IDA is suited to radar, imaging, communications, and other high-speed acquisition systems. Its 12-bit resolution, two simultaneous-sampling channels, and 8 MSPS conversion rate provide a compact way to digitize paired analog signals. The 32-pin TSSOP package also supports controlled PCB routing, although analog input conditioning and reference integrity remain central to achieving accurate conversion results.
What input modes does THS1209IDA support?
The THS1209IDA supports single-ended and differential analog input configurations. According to the Texas Instruments THS1209 documentation, the dual-channel device can be used for applications requiring simultaneous capture of two related signals. Input mode selection affects source impedance, voltage ranges, common-mode handling, and the external network connected to each analog pin, so follow the manufacturer’s input-circuit recommendations rather than treating the channels as interchangeable single-ended ports.
How does channel autoscan help in a THS1209IDA data-acquisition system?
Channel autoscan lets the THS1209IDA acquire channels in a defined repeating sequence under digital control. According to the Texas Instruments THS1209 product page, this feature supports efficient multi-channel measurement systems. It is useful when the firmware must repeatedly sample several transducers, yet the hardware must maintain a common clock and deterministic data-transfer cadence. The controller should follow the interface timing specified for the selected output and clock mode.
THS1209IDA vs THS1209CDA - which version should I select?
THS1209IDA is the 32-pin TSSOP DA ordering option specified for -40°C to +85°C industrial operation, while THS1209CDA is a separate orderable variant whose detailed ordering differences must be confirmed in the manufacturer ordering table. Both belong to the same THS1209 family. Before substituting one for the other, compare package, temperature grade, production status, and exact pin assignment in the current Texas Instruments datasheet.
When should I choose THS1209IDA over another dual-channel ADC?
Choose THS1209IDA when the design needs two simultaneously sampled channels, 12-bit resolution, an 8 MSPS conversion rate, and a DSP or microprocessor interface in a 32-pin TSSOP package. It is especially appropriate when coherent timing between paired signals is more important than using a converter with more channels or higher resolution. A different ADC should be selected when its input bandwidth, interface, package, or power requirements better match the system.
What can replace THS1209IDA on the same PCB?
A genuine THS1209IDA replacement must use the same 32-pin TSSOP footprint and preserve pin-compatible analog, clock, reference, power, and digital-interface connections while remaining within the required resolution, throughput, and temperature limits. The available cross-reference results do not establish a qualified drop-in substitute, so no replacement is approved here. Use the Request a Quote form on this page to ask for an engineering review of a proposed alternate MPN.
Is THS1209IDA the same as THS1209IDAG4?
THS1209IDAG4 is a distinct orderable suffix associated with the same THS1209 family, but a suffix can identify a different environmental, packaging, or ordering configuration. It should not be treated as automatically interchangeable solely because the base number is similar. Confirm the package, temperature grade, pin compatibility, lifecycle status, and assembly requirements against the current Texas Instruments ordering information before approving a substitution.
What is the best Texas Instruments equivalent for THS1209IDA?
No alternative Texas Instruments MPN can be identified as a confirmed drop-in equivalent from the documented ordering and cross-reference information. The closest same-family candidate is THS1209CDA, but its exact pin and ordering configuration must be confirmed before use. Because no substitute is technically validated here, treat THS1209CDA as a comparison candidate rather than an automatic replacement, and request a schematic-level compatibility review.
Where can I buy THS1209IDA and check stock?
Use the Request a Quote form on this page to request THS1209IDA availability, order quantity, and current lead time. The inquiry should state the required package, quantity, and whether reel, tube, or bulk packing is needed. Stock status can change by lot and shipment schedule, so a written quotation provides the most appropriate confirmation before production planning.
How much does THS1209IDA cost?
Request a current quotation for THS1209IDA through the Request a Quote form on this page. The quoted amount can depend on order quantity, package shipping format, component availability, and shipment schedule. Provide your annual usage, target quantity, and acceptable packaging format so the commercial offer reflects the actual production requirement rather than a generic quantity.
What is the lead time for THS1209IDA?
Request the current THS1209IDA lead time through the Request a Quote form on this page. Lead time depends on available inventory, manufacturing schedules, order volume, and the selected shipping format. For production planning, request a written quotation that states the quantity, package option, estimated dispatch timing, and any lot or date-code requirements.
Is THS1209IDA in stock?
Current THS1209IDA inventory should be confirmed through the Request a Quote form on this page. Availability can vary with quantity and packing format, so submit the required order quantity and state whether tape-and-reel, tube, or bulk delivery is needed. The quotation response should be used as the stock confirmation for planning purposes.
How should THS1209IDA be laid out for high-speed dual-channel acquisition?
Place each analog input’s conditioning network close to its corresponding THS1209IDA pin, keep the two channels geometrically similar, and provide a low-impedance return beneath sensitive routes. The manufacturer datasheet’s recommended reference, supply-decoupling, and clock layouts should be followed to minimize crosstalk, ground bounce, and timing error. Keep switching-current paths away from analog inputs and use a stable clock source with controlled impedance.

Data referensi engineering untuk THS1209IDA — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose THS1209IDA when the design requires two simultaneously sampled analog channels, 12-bit resolution, and an 8 MSPS conversion rate in a 32-pin TSSOP package. It is particularly well suited to radar, imaging, communications, and coherent industrial measurement systems where paired inputs must remain aligned. The DSP or microprocessor interface and channel autoscan simplify digital acquisition-controller integration. Select a different converter if the application needs more than two channels, substantially higher resolution, a wider input bandwidth, a different supply arrangement, or a different package. THS1209CDA and THS1209IDAG4 are same-family comparison candidates rather than automatically approved replacements; verify their exact ordering, temperature, pin, and lifecycle details before release. Because no technically confirmed drop-in alternative is established, board redesign should not be assumed when changing orderable suffixes.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 32-pin TSSOP (DA)
Brand Texas Instruments
Resolution 12 bit
Conversion Rate 8 MSPS
Input Channels 2
Sampling Architecture Simultaneous sampling
Input Configuration Single-ended or differential
Digital Interface DSP or microprocessor interface
Operating Temperature Range -40°C to +85°C
Supply Configuration Single-supply operation

Diferensiator Kunci

  • Two-channel simultaneous sampling preserves timing alignment (vsTHS1209CDA)
  • Single-supply low-power CMOS implementation (vsTHS1209IDAG4)
  • Dedicated acquisition features in a compact package (vsTHS1209CDA)

Catatan Desain

Route the two analog inputs symmetrically and keep their conditioning networks close to the THS1209IDA pins. Use a continuous ground reference beneath the sensitive traces, avoid splitting the ground plane under the ADC, and keep switching-current loops away from the input nodes. Identical channel geometry helps reduce skew and amplitude mismatch when simultaneous sampling is important.

Follow the manufacturer’s recommended input, reference, and clock layouts. High-speed conversion performance depends on controlled clock routing, low clock jitter, clean reference voltage, and suitable source impedance at every analog input. Place decoupling capacitors at the associated supply and reference pins with very short ground returns, and test the assembled board for crosstalk, aliasing, and channel-to-channel timing differences.

Do not assume that two input channels can be sampled in any sequence without considering pipeline latency, autoscan behavior, and digital-interface timing. Confirm the output mode, clock polarity, data alignment, and settling requirements in the Texas Instruments datasheet. Also verify that analog input voltages and common-mode levels remain within their limits under startup, overload, and fault conditions.

Use a stable, low-impedance reference and power network because converter accuracy and channel matching depend on both. Keep the analog and digital return currents controlled, provide local bypass capacitance, and avoid routing the high-speed clock close to sensitive input traces. For the 32-pin TSSOP package, maintain the manufacturer’s land pattern and paste geometry without adding improvised thermal or exposed-pad features.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The component is an industrial-grade analog-to-digital converter rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the current manufacturer product documentation.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

THS1209IDA datasheet THS1209IDA pinout THS1209IDA datasheet pdf THS1209IDA equivalent THS1209IDA replacement THS1209 vs THS1209CDA THS1209 32-TSSOP ADC THS1209 12 bit 8 MSPS THS1209 simultaneous sampling ADC THS1209 radar imaging ADC THS1209IDA price THS1209IDA stock Texas Instruments THS1209IDA THS1209 footprint THS1209 application circuit

Komponen dan Istilah Terkait

Texas Instruments THS1209IDA THS1209 THS1209CDA THS1209IDAG4 analog-to-digital converter ADC pipelined ADC 12-bit ADC dual-channel ADC simultaneous sampling 8 MSPS DSP interface microprocessor interface channel autoscan single-ended input differential input single-supply operation CMOS low-power ADC 32-pin TSSOP TSSOP DA package radar acquisition medical imaging high-speed data acquisition
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ