Texas Instruments

THS6132VFP - High-Efficiency Class-G ADSL Driver | Texas Instruments

MPN: THS6132VFP ✓ Aktif
5 V Vdss 32-pin HLQFP (VFP) Package
MOQ: 1 |

THS6132VFP Ringkasan

The Texas Instruments THS6132VFP is a high-efficiency Class-G current-feedback differential line driver designed for full-rate ADSL DMT systems and PLC line-driver applications. The device combines a 2/0 differential driver configuration, low power consumption of 600 mW or less, and operation from a single 5 V supply in a 32-pin HLQFP package with an exposed thermal pad. Its differential architecture is intended for driving copper loops through transformer-coupled or balanced line interfaces while maintaining low signal distortion at high data rates.

A line driver is an interface integrated circuit that converts a low-voltage differential logic signal into a larger-amplitude differential output capable of driving transmission-line impedance. Within the signal-chain hierarchy, the THS6132 belongs to the line-driver class of interface ICs, which sits above differential amplifiers and supports communication equipment such as DSL access concentrators, central-office line cards, and power-line communication gateways. Its Class-G operating architecture emphasizes high efficiency while reducing the quiescent current needed when the line is inactive.

The principal advantages of the THS6132 are its low power dissipation, differential current-feedback output stage, and suitability for full-rate ADSL systems. The 32-pin HLQFP (VFP) package measures 7 x 7 mm and includes an exposed pad for improved thermal performance in dense communications equipment. The manufacturer identifies the device as a 2/0 driver, meaning it provides two differential outputs and no receiver inputs in the same package.

Typical deployment is in ADSL line cards and central-office rack equipment where many line-driver channels must operate continuously within limited thermal and power budgets. The device can also serve PLC systems that use carrier-based communication over power lines, provided the external line interface, transformer coupling, protection network, and bandwidth requirements are designed for that environment. Differential routing helps reject common-mode noise picked up along externally routed copper pairs.

When laying out a THS6132VFP circuit, treat the output stage and supply return as high-current paths even though the device is classified as a line driver. Keep the exposed-pad connection to the ground plane unobstructed, place supply bypass capacitors close to their pins, and follow the manufacturer pin-description table when assigning tracks. Decoupling values, differential termination, transformer turns ratio, and maximum line-reach parameters should be taken directly from the manufacturer datasheet rather than inferred from generic analog-design rules.

This page combines the manufacturer device description with a practical view of package construction, thermal handling, interface topology, and application selection. It also organizes drop-in ordering variants, comparison parameters, and design cautions to support sourcing and first-pass PCB planning.

Alternatif penggantian untuk THS6132VFP — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

THS6132VFPR

✅ Drop-In
📦 HLQFP-32 (VFP) 7x7 mm
Tape-and-reel ordering suffix; electrical ratings and terminal arrangement are otherwise identical, with 0% difference in key device parameters

📋 Alternatif referensi (tidak dalam katalog)

THS6132VFPRG4

✅ Drop-In
📦 HLQFP-32 (VFP) 7x7 mm
Green ordering variant with the same 32-pin footprint and functional characteristics; 0% difference in key device parameters

📋 Alternatif referensi (tidak dalam katalog)

THS6132VFPG4

✅ Drop-In
📦 HLQFP-32 (VFP) 7x7 mm
Green ordering suffix for the same VFP device and terminal arrangement; 0% difference in key device parameters

📋 Alternatif referensi (tidak dalam katalog)

THS6132VFP Spesifikasi

Device Type High-Efficiency Class-G ADSL and PLC Line Driver
Driver Configuration 2/0 differential driver
Architecture Current-feedback differential line driver
Maximum Power Consumption 600 mW or less
Tegangan Pemuat 5 V
Rentang Suhu Kerja -40 °C to +85 °C
Package Type 32-pin HLQFP (VFP)
Package Dimensions 7 mm x 7 mm
Exposed Thermal Pad Yes
Tipe Mounting Surface Mount
Target Application Full-rate ADSL DMT systems and PLC line driving

THS6132VFP 7 mm x 7 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk THS6132VFP (7 mm x 7 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 7 mm x 7 mm untuk THS6132VFP

Tidak ada data diatribut pin yang tersedia untuk THS6132VFP.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

THS6132VFP cocok untuk 6 aplikasis: Full-Rate ADSL DMT Line Cards, ADSL Central-Office Concentrators, Power-Line Communication Gateways, Carrier-Based Digital Subscriber Equipment, High-Density DSL Access Equipment, Industrial Communication Line Interfaces.

🌐

Full-Rate ADSL DMT Line Cards

The THS6132VFP fits transmit channels in full-rate ADSL DMT line cards because it is designed as a 2/0 current-feedback differential driver with power consumption of 600 mW or less. Place it behind the appropriate transformer or coupling network and use the manufacturer reference topology to establish the required operating point. Its two differential outputs support balanced line interfaces, while the 32-pin VFP package allows dense central-office rack boards. The main design constraint is continuous line power: adequate exposed-pad copper and low-inductance supply return are essential when many channels operate simultaneously.

🖥️

ADSL Central-Office Concentrators

Central-office concentrators benefit from the THS6132VFP because its low 600 mW-or-less power target supports high channel density in rack-mounted equipment. The transmit-only 2/0 arrangement avoids allocating receiver circuitry where only outbound line signals are required. Place the exposed pad over a solid ground region with a via array, and position bypass capacitors close to the supply pins to keep the Class-G driver stable during continuous data transmission. Actual rack capacity depends on line rate, transformer or coupling-network losses, ambient temperature, and the thermal resistance of the completed PCB.

🏭

Power-Line Communication Gateways

The THS6132VFP can serve as the differential transmit stage in a PLC gateway when the carrier, coupling network, filtering, and protection scheme meet the target power-line network standard. Its differential output helps reduce common-mode pickup on externally routed conductors, while the Class-G architecture targets efficient operation during continuous transmission. Do not treat the IC as a complete PLC transmitter: impedance matching, surge protection, band-pass filtering, and regulatory compliance belong in the external analog network. PCB symmetry between the two outputs is important for minimizing timing and amplitude mismatch.

📡

Carrier-Based Digital Subscriber Equipment

The THS6132VFP is appropriate for transmit-side circuitry in carrier-based subscriber equipment using ADSL-derived modulation. The 5 V supply and differential current-feedback output suit compact communication modules, while the 7 x 7 mm VFP package helps limit board area in multi-channel designs. Maintain symmetric routing between the differential outputs, keep high-current paths short, and follow the datasheet termination arrangement. The transmit chain should be validated with the intended line impedance and transformer because compliance and reach depend on the complete line interface rather than the driver IC alone.

📶

High-Density DSL Access Equipment

Access equipment with many DSL transmit channels can use the THS6132VFP to keep per-channel power low while retaining a differential line-driver interface. The 2/0 configuration provides two transmit outputs per package without unnecessary receiver functions, and the exposed pad supports heat removal on a densely populated board. Separate the sensitive receive or measurement circuitry from the driver supply return, and verify loop gain and distortion in the complete transformer-coupled channel. A PCB with continuous copper beneath the package improves thermal performance more effectively than an isolated pad connection.

🔧

Industrial Communication Line Interfaces

The THS6132VFP can be evaluated for industrial line interfaces that require a low-power differential transmitter over a short copper or cable run. Its differential current-feedback topology supports balanced signaling, and its -40 °C to +85 °C operating range suits many industrial environments. External protection, isolation, or filtering may still be required depending on the cable length and installation environment. Validate ground-reference strategy carefully because industrial systems often combine chassis protection with signal-ground requirements that differ from those of a central-office DSL rack.

What is the THS6132VFP used for?
The THS6132VFP is a high-efficiency Class-G differential line driver for full-rate ADSL DMT systems and PLC line-driver equipment. Texas Instruments describes it as a current-feedback driver with a 2/0 configuration, meaning two differential outputs and no receivers. It is intended for communications infrastructure where several line-driver channels operate continuously within limited rack-level power and thermal budgets.
How much power does the THS6132VFP consume?
The THS6132VFP consumes 600 mW or less under the conditions described by Texas Instruments. This low power figure supports high-density ADSL central-office rack applications in which many channels must operate simultaneously. Actual channel dissipation depends on supply voltage, output signal amplitude, load impedance, data pattern, and the operating mode, so use the manufacturer power-consumption curves for a worst-case thermal estimate.
What package does the THS6132VFP use?
The THS6132VFP uses a 32-pin HLQFP package designated VFP, measuring 7 x 7 mm, with an exposed thermal pad. The exposed pad must be connected to the ground plane to provide a low-inductance return and heat-dissipation path. Use the manufacturer pin-description table and land-pattern example when assigning the exposed pad and connecting the bypass capacitors.
Is the THS6132VFP a differential driver or a receiver?
The THS6132VFP is a 2/0 differential driver, not a mixed transceiver. It provides two differential output channels for driving line-coupled equipment, while no receiver inputs are included. The current-feedback topology supports full-rate ADSL DMT systems and PLC applications, where a differential output helps reject common-mode noise coupled into externally routed copper or power-line wiring.
Where can I download the THS6132VFP datasheet?
The official THS6132 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/THS6132, and the product page at https://www.ti.com/product/THS6132 provides ordering and support information. The manufacturer datasheet is the controlling document for the pin description, electrical characteristics, recommended application circuit, exposed-pad layout, and Class-G operating details.
Where can I find the THS6132VFP pinout?
The THS6132VFP pin description is published in the manufacturer THS6132 datasheet under the Pin Configuration and Pin Functions sections. The component has 32 package pins in the VFP HLQFP, plus the exposed thermal pad shown in the land-pattern drawing. Use that table directly for PCB net assignment because several high-current and bypass connections are placement-sensitive.
What can replace the THS6132VFP?
The THS6132VFPR is a drop-in ordering alternative for the THS6132VFP because it uses the same 32-pin VFP HLQFP construction and is identified as a complete replacement with consistent terminals and package characteristics. Green-roof ordering variants such as THS6132VFPRG4 can also match the same electrical device definition. Confirm the exact orderable suffix and current lifecycle status before releasing a production BOM.
What is the best TI equivalent for the THS6132VFP?
The closest Texas Instruments ordering equivalent is the THS6132VFPR, which retains the same 32-pin VFP HLQFP footprint and corresponding terminal arrangement. The THS6132VFPRG4 and THS6132VFPG4 ordering variants also appear as functionally equivalent parts. These are same-device ordering options rather than different line-driver designs, so verify reel, green-compliance, and packing requirements for your assembly process.
When should I choose the THS6132VFP instead of another ADSL driver?
Choose the THS6132VFP when a design needs a low-power, high-efficiency Class-G current-feedback driver for a full-rate ADSL DMT line or PLC interface. Its 600 mW-or-less power target suits dense central-office rack equipment, while the 2/0 differential configuration simplifies boards dedicated to transmitting only. Choose a different driver family when the design requires receiver channels, a different supply architecture, or a line standard outside the THS6132 specifications.
Is the THS6132VFP suitable for PLC line driving?
Yes, Texas Instruments identifies the THS6132VFP as a driver for both ADSL and PLC line applications. PLC suitability still depends on the coupling network, filtering, carrier frequency, protection elements, and regulatory requirements of the target network. The line interface should be designed around the datasheet output drive capability rather than assuming that the IC alone defines a compliant PLC transmitter.
How is the THS6132VFP exposed thermal pad connected?
The THS6132VFP exposed pad is connected to ground and tied to the ground plane through a dense, low-inductance via array. The pad removes heat from the device while providing a short return path for output and supply currents. Follow the manufacturer land-pattern example for via count and pad geometry, and avoid placing plane splits or high-current routing beneath the exposed-pad region.
What is the operating temperature range of the THS6132VFP?
The THS6132VFP is specified for operation from -40 °C to +85 °C. Commercial-temperature qualification does not by itself guarantee adequate margin in a sealed or high-ambient enclosure. Confirm that the calculated worst-case junction temperature remains below the device limit after accounting for dissipation, the exposed-pad land pattern, copper area, and the enclosure temperature.
How should I design the supply bypassing for the THS6132VFP?
Place the manufacturer-recommended bypass capacitors directly at the THS6132VFP supply and ground pins, with the shortest possible trace and via connections. The exposed ground pad should tie into the same low-impedance ground structure so that high-current output transitions do not share a long return path with the bypass network. Capacitor values and stability requirements must follow the manufacturer application circuit.
Is the THS6132VFP pin compatible with THS6132VFPR?
Yes, the THS6132VFPR is pin-compatible with the THS6132VFP because both use the same 32-pin VFP HLQFP package and corresponding terminal arrangement. Cross-reference listings describe the main performance parameters, functional characteristics, terminals, and package as consistent, allowing direct replacement without PCB modification. Validate supplier traceability and the exact suffix before treating it as an approved alternate.
What are the key specifications of THS6132VFP that engineers should know?
The THS6132VFP is a 5 V, high-efficiency Class-G current-feedback line driver with two differential outputs, power consumption of 600 mW or less, and a 32-pin 7 x 7 mm HLQFP package. Texas Instruments positions it for full-rate ADSL DMT systems and PLC equipment, with an operating range of -40 °C to +85 °C. The exposed pad and differential current-feedback architecture are central to layout and thermal design.
Where can I request a quote for THS6132VFP?
Use the Request a Quote form on this page to request current THS6132VFP pricing, stock confirmation, lead time, and minimum-order quantity. The quote team can also confirm whether the tape-and-reel ordering variants are preferable for your production line. Lead time and allocation vary with order volume and market conditions, so obtain a written quotation for the planned build schedule.

Data referensi engineering untuk THS6132VFP — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the THS6132VFP when designing a transmit channel for full-rate ADSL DMT equipment or a PLC gateway that benefits from the Class-G efficiency target of 600 mW or less. The 2/0 configuration is appropriate when only differential outputs are needed and reduces the opportunity to populate unnecessary receiver circuitry. THS6132VFPR, THS6132VFPRG4, and THS6132VFPG4 are ordering variants of the same device rather than different performance classes; select them according to reel, green-compliance, and assembly requirements while preserving the same 32-pin VFP land pattern. If a design needs a mixed transceiver, adjustable gain, different supply voltage, or a line standard with different bandwidth and isolation requirements, evaluate a different driver family. For any choice, use the manufacturer pin table, exposed-pad land pattern, and application circuit as the authoritative design references.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini THS6132VFPR THS6132VFPRG4 THS6132VFPG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 32-pin HLQFP (VFP), 7 x 7 mm 32-pin HLQFP (VFP), 7 x 7 mm - same 32-pin HLQFP (VFP), 7 x 7 mm - same 32-pin HLQFP (VFP), 7 x 7 mm - same
Device Type High-Efficiency Class-G ADSL and PLC Line Driver High-Efficiency Class-G ADSL and PLC Line Driver High-Efficiency Class-G ADSL and PLC Line Driver High-Efficiency Class-G ADSL and PLC Line Driver
Driver Configuration 2/0 differential driver 2/0 differential driver 2/0 differential driver 2/0 differential driver
Architecture Current-feedback differential line driver Current-feedback differential line driver Current-feedback differential line driver Current-feedback differential line driver
Maximum Power Consumption 600 mW or less 600 mW or less 600 mW or less 600 mW or less
Supply Voltage 5 V 5 V 5 V 5 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Target Application Full-rate ADSL DMT systems and PLC line driving Full-rate ADSL DMT systems and PLC line driving Full-rate ADSL DMT systems and PLC line driving Full-rate ADSL DMT systems and PLC line driving
Exposed Thermal Pad Yes Yes Yes Yes

Diferensiator Kunci

  • High-efficiency Class-G architecture for dense line-card designs (vsTHS6132VFPR)
  • Transmit-only package avoids unused receiver circuitry (vsTHS6132VFPRG4)
  • Compact 7 x 7 mm surface-mount implementation (vsTHS6132VFPG4)
  • Support for both ADSL and PLC transmit interfaces (vsTHS6132VFPR)

Catatan Desain

Connect the exposed pad to a continuous ground plane with a dense via array and keep the copper area beneath the package free of splits. The exposed pad is the primary thermal path for this 32-pin VFP device. In a multi-channel line card, verify the combined heat rise from all channels at the hottest operating point rather than evaluating one channel in isolation. Use the manufacturer thermal layout example as the baseline for copper geometry and via placement.

Place bypass capacitors next to the relevant supply and ground pins, and use the shortest practical ground-via path from each capacitor. Avoid sharing a narrow common trace between bypass returns, the exposed pad, and output-current paths. Differential outputs should be routed with consistent geometry and matched termination so that amplitude and timing mismatch do not degrade line performance. Follow the manufacturer land pattern and application circuit for exact connectivity.

Treat both differential outputs as a matched pair and preserve symmetry from the THS6132VFP pins to the transformer or coupling network. Keep the external line interface, protection components, and filtering network close enough to control parasitic inductance and reflections. Confirm the output drive level against the intended line impedance using the manufacturer current-versus-voltage data before selecting the external network.

Do not substitute the THS6132 for a general-purpose differential amplifier without checking the Class-G operating conditions, gain structure, output drive, and supply requirements. Also do not treat the exposed pad as an optional thermal feature: an unwired or inadequately plated pad can overheat the device during continuous transmission. Verify the exact ordering suffix and pin mapping on the approved assembly drawing.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The green ordering suffix identifies an environmental-compliant ordering option, but individual RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the manufacturer text quoted for this page.

Pencarian Terkait

THS6132VFP datasheet THS6132VFP datasheet pdf THS6132VFP pinout THS6132VFP pin configuration THS6132VFP equivalent THS6132VFP drop-in replacement THS6132VFP vs THS6132VFPR THS6132VFP footprint THS6132VFP schematic THS6132 Class-G ADSL driver Texas Instruments THS6132VFP THS6132VFP price THS6132VFP stock 32 pin HLQFP ADSL line driver THS6132 PLC line driver application

Komponen dan Istilah Terkait

Texas Instruments THS6132VFP THS6132VFPR THS6132VFPRG4 THS6132VFPG4 Class-G line driver ADSL line driver PLC line driver differential driver current-feedback amplifier interface integrated circuit transceiver full-rate ADSL DMT power-line communication HLQFP-32 VFP package exposed thermal pad surface mount 5 V power supply 600 mW power consumption common-mode rejection differential signaling central-office rack ADSL line card RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ