TLV2474ID - 2.8MHz RRIO Quad Op Amp | Texas Instruments
MPN: TLV2474ID ✓ AktifTLV2474ID Ringkasan
An operational amplifier is a voltage-controlled differential amplifier whose gain can be set with external feedback components. The TLV2474 belongs to the CMOS operational-amplifier family within the broader voltage-amplifier and analog signal-conditioning hierarchy. Rail-to-rail input and output operation allows the amplifier to process signals near the positive and negative supply rails, making it useful in portable instrumentation, battery-powered sensing, and low-voltage industrial control systems.
Key features include four amplifiers per package, 2.8 MHz gain-bandwidth product, approximately 600 µA supply current per channel, rail-to-rail input and output operation, and high output-drive capability. The family also includes shutdown-capable versions according to the manufacturer’s product description. These characteristics balance low supply consumption against substantially more bandwidth than typical micropower amplifiers, making the TLV2474 suitable for signal conditioning rather than only static sensor interfaces.
The CMOS architecture supports low-voltage operation and low quiescent current while preserving rail-to-rail signal handling. Gain-bandwidth product determines the maximum practical closed-loop gain at a given frequency; a 2.8 MHz amplifier can provide useful bandwidth for moderate-gain active filters, transimpedance stages, buffers, and low-frequency communication channels. High output-drive capability also makes the device more practical when driving downstream capacitance or a following amplifier stage.
Typical uses include portable sensor interfaces, low-power data-acquisition front ends, active audio and communication filters, industrial measurement systems, and battery-operated monitoring equipment. The 14-pin SOIC package allows four amplifiers to be consolidated on a relatively small PCB area, reducing component count compared with four separate single or dual amplifier packages.
Designers should verify input common-mode range, output swing, capacitive-load stability, shutdown behavior, and operating-temperature limits for the exact ordering code in the manufacturer datasheet. Input and output stability capacitors should be placed close to their associated pins, while sensitive feedback traces should be kept away from switching nodes and high-current return paths.
This product page combines the manufacturer product information, package identification, orderable-family distinctions, and verified substitution research into an engineering-focused view. It also provides comparison criteria, application guidance, design checks, and practical drop-in alternatives to support component selection and PCB reuse decisions.
Alternatif penggantian untuk TLV2474ID — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TLV2474ID (sama faktor bentuk dan footprint).
TLV2474CD
✅ Drop-InKontak untuk harga
Lihat Datasheet →TLV2474IDG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TLV2474QD
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
TLV2474ID Rating Maksimal & Karakteristik Listrik
| Number of Amplifiers | 4 channels |
| Amplifier Type | CMOS operational amplifier |
| Supply Voltage Maximum | 6 V |
| Gain-Bandwidth Product | 2.8 MHz |
| Supply Current per Channel | 600 µA |
| Shutdown Support | Available in the TLV2474 family |
| Paket | 14-pin SOIC |
TLV2474ID 14-pin soic Diamant Konfigurasi Panduan
Konfigurasi pin untuk TLV2474ID (14-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk TLV2474ID.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
TLV2474ID cocok untuk 6 aplikasis: Portable Sensor Signal Conditioning, Active Audio Filtering, Industrial Data Acquisition, Battery-Powered Monitoring, Communication Buffering, Low-Voltage Test and Measurement.
Portable Sensor Signal Conditioning
The TLV2474ID fits low-voltage sensor front ends that require several conditioned channels without consuming four separate amplifier packages. Its approximately 600 µA supply current per channel and 2.8 MHz gain-bandwidth product provide more useful signal-path bandwidth than a basic micropower amplifier. Rail-to-rail input and output capability is valuable when transducer signals approach the available supply range. Place each channel’s feedback network close to its amplifier pins, and confirm the exact common-mode and output-swing limits against the operating supply voltage before defining the sensor gain range.
Direkomendasikan
Active Audio Filtering
The TLV2474ID can implement active filters and gain stages in compact audio or communication equipment. Its 2.8 MHz gain-bandwidth product supports moderate closed-loop gains, while the high-output-drive capability helps the amplifier drive the next analog stage. Rail-to-rail operation can improve utilization of a low-voltage signal range. The four amplifiers allow common filtering or buffering functions to be consolidated in one 14-pin SOIC. Select resistor and capacitor values that preserve the intended gain at the operating frequency, and test capacitive loading because cable and input-stage capacitance can affect stability.
Direkomendasikan
Industrial Data Acquisition
The TLV2474ID suits multi-channel industrial measurement systems where four low-voltage analog signals require buffering or moderate amplification. Its approximately 600 µA per-channel supply current helps control system power, and the 2.8 MHz gain-bandwidth product is appropriate for many low-to-moderate-bandwidth instrumentation signals. Rail-to-rail inputs and outputs improve compatibility with low-voltage sensor ranges. Keep input traces short, place feedback components adjacent to the relevant amplifier, and route return currents away from sensitive analog inputs to reduce coupling from switching converters and digital circuitry.
Direkomendasikan
Battery-Powered Monitoring
The TLV2474ID can condition outputs from portable environmental and health-monitoring devices operating from low-voltage batteries. Four channels allow sensor, reference, and output stages to share one package, while approximately 600 µA per channel balances responsiveness against energy consumption. The 2.8 MHz bandwidth provides headroom for modest-frequency filtering and signal amplification. Use the shutdown feature where the application permits intermittent operation, and account for the aggregate four-channel current plus regulator losses when calculating battery life. Verify that sensor excitation amplitudes remain within the amplifier’s specified common-mode range.
Direkomendasikan
Communication Buffering
The TLV2474ID is suitable for low-frequency communication-channel buffering, impedance conversion, and modest gain stages. Its 2.8 MHz gain-bandwidth product offers more closed-loop bandwidth than a conventional low-power precision amplifier, and the high output-drive capability helps interface with downstream circuitry. Rail-to-rail operation is useful when the signal occupies much of a 3 V or 5 V system range. Keep the amplifier’s feedback loop compact, verify stability with the intended source and load impedances, and observe the manufacturer’s output-current and capacitive-load guidance for the attached cable or network interface.
Direkomendasikan
Low-Voltage Test and Measurement
The TLV2474ID can provide input buffering, gain, and active filtering in compact test and measurement equipment. The quad configuration reduces the number of amplifier packages required when several low-level nodes must be conditioned simultaneously. Its 2.8 MHz gain-bandwidth product supports moderate-bandwidth measurements, and approximately 600 µA per channel is useful for compact or handheld instruments. Keep high-impedance input paths short and guard them against leakage and surface contamination. Confirm offset, bias-current, noise, and input-range specifications against the manufacturer datasheet before using the amplifier for precision measurements near the noise floor.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TLV2474ID — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TLV2474CD | TLV2474IDG4 | TLV2474QD |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC - same | 14-pin SOIC - same | 14-pin SOIC - same |
| Number of Amplifiers | 4 channels | 4 channels | 4 channels | 4 channels |
| Gain-Bandwidth Product | 2.8 MHz | 2.8 MHz | 2.8 MHz | 2.8 MHz |
| Supply Current per Channel | 600 µA | 600 µA | 600 µA | 600 µA |
| Maximum Supply Voltage | 6 V | 6 V | 6 V | 6 V |
| Input and Output Range | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
| Temperature Grade | Industrial commercial-temperature ordering code | Commercial-temperature ordering code | Industrial commercial-temperature ordering code | Extended-temperature ordering code |
| Output Drive Capability | High output-drive capability | High output-drive capability | High output-drive capability | High output-drive capability |
Diferensiator Kunci
- Four rail-to-rail amplifiers in one 14-pin SOIC (vsTLV2474CD)
- Balanced low-power and AC performance (vsTLV2474QD)
- Core device characteristics remain unchanged across the ID ordering designation (vsTLV2474IDG4)
Catatan Desain
Keep each amplifier’s feedback resistors and compensation network close to its input and output pins to minimize parasitic capacitance and feedback-loop length. Because the TLV2474ID provides 2.8 MHz gain-bandwidth product and high output-drive capability, fast edges can couple into adjacent analog channels. Route outputs away from sensitive inputs, use a quiet ground reference, and avoid placing long high-impedance traces beneath digital or switching-power nodes.
Estimated: the nominal channel-current sum for four active channels is 2.4 mA, calculated from the stated 600 µA per channel. Actual supply demand can differ with input voltage, output swing, load, and shutdown state. In a battery-powered design, add regulator quiescent current and conversion losses to this 2.4 mA active-channel baseline, and use the shutdown control when the application can remain inactive between measurements.
Do not assume that rail-to-rail operation makes every input or output level valid. The exact common-mode range and output-swing limits vary with supply voltage, and the output may not reach the rails. Confirm these boundaries in the manufacturer datasheet, preserve output headroom for the load, and include the sensor, cable, or filter impedance when evaluating input bias, noise, and stability.
Check the intended closed-loop gain against the 2.8 MHz gain-bandwidth product before finalizing filter and amplifier values. A practical first-order bandwidth estimate can be made from gain-bandwidth product divided by noise gain, but that estimate does not replace stability and transient-response testing. When driving longer cables or capacitive inputs, follow the manufacturer’s capacitive-load guidance and add isolation or series damping if required.
Informasi Konformitas
Compliance attributes were not stated on the manufacturer product page excerpt or the distributor results. Qualification must be confirmed from the current manufacturer documentation and product declarations.