Texas Instruments

TUSB6020ZQER - USB 2.0 OTG Controller | Texas Instruments

MPN: TUSB6020ZQER ✓ Aktif
1.5 V Vdss 80-ball VFBGA Package
MOQ: 1 |

TUSB6020ZQER Ringkasan

The Texas Instruments TUSB6020ZQER is a USB 2.0 dual-role controller with an OTG-capable parallel interface, supplied in an 80-ball, 5 x 5 mm VFBGA package with a 0.5 mm ball pitch. It supports 1.5 V, 1.8 V, and 3.3 V supply rails and is designed for embedded USB host, device, and dual-role applications requiring direct parallel-interface integration with an applications processor or system controller.

A USB interface controller is an interface IC within the broader semiconductor hierarchy. It coordinates USB traffic between a host processor and external USB devices or ports. Unlike a general-purpose microcontroller, the TUSB6020ZQER concentrates on protocol handling, USB 2.0 connectivity, and host or device interface management, allowing the attached processor to concentrate on application-specific tasks.

The device's principal features include USB 2.0 operation, On-The-Go functionality, and a parallel interface. Its 80-terminal VFBGA construction supports compact systems where connector space and board area are constrained. Separate 1.5 V, 1.8 V, and 3.3 V rail names appearing in the device documentation indicate that the implementation must account for multiple interface voltage domains rather than treating the controller as a single-rail component.

The TUSB6020ZQER belongs to the same TI TUSB6020 family as the TUSB6020ZQE, TUSB6020PFC, and TUSB6020PFCR device identifiers. Its commercial temperature grade and dense ball-array package make it appropriate for compact industrial, communications, and embedded-computing equipment. Detailed operating limits, clock requirements, transceiver characteristics, and exact ball assignments should be taken from the manufacturer datasheet before final schematic and layout release.

Typical uses include USB-to-serial bridge products, industrial data-acquisition equipment, portable data terminals, and embedded systems that need USB host or dual-role behavior. The parallel interface can provide a deterministic processor-facing bus when an external USB transceiver is used. Designers should also consider the controller's exact USB role, external transceiver arrangement, and required low-speed, full-speed, or high-speed support when selecting the device.

PCB implementation requires careful high-speed signal integrity planning. Ball-array escape routing should remain short and symmetrical, power and ground planes should be continuous, and the manufacturer's recommended decoupling and layout guidance should be followed. Because the 5 x 5 mm package uses a 0.5 mm pitch, assembly capability, via-in-pad design, and thermal-via strategy must be reviewed during board planning.

This page consolidates the verified package, interface, voltage, and temperature information for TUSB6020ZQER with application guidance, sourcing directions, and an explicit review of drop-in alternatives. Exact electrical limits and the complete 80-ball assignment should always be confirmed against the manufacturer documentation for the specific device variant.

Alternatif penggantian untuk TUSB6020ZQER — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian TUSB6020ZQER (sama faktor bentuk dan footprint) — berbeda di dalam Product Type.

Texas Instruments
Product Type: USB 2.0 high-speed OTG dual-role controller
Bandingkan dengan TUSB6020ZQER →

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

TUSB6020ZQER Spesifikasi

Product Type USB 2.0 dual-role OTG controller
USB Interface USB 2.0
Host/Device Role Dual-role controller with OTG support
Processor Interface Parallel interface
Package Type 80-ball VFBGA
Package Code ZQE
Package Dimensions 5 x 5 mm
Ball Pitch 0.5 mm
Terminal Count 80 terminals
VDDCM Supply 1.5 V
VDD Supply 1.5 V or 1.8 V
VDDA Supply 1.5 V
VDDD Supply 1.5 V
Temperature Grade Commercial
Terminal Form Ball
Package Shape Square
Tipe Mounting Surface mount

TUSB6020ZQER square Diamant Konfigurasi Panduan

Konfigurasi pin untuk TUSB6020ZQER (square pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai square untuk TUSB6020ZQER

Tidak ada data diatribut pin yang tersedia untuk TUSB6020ZQER.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

TUSB6020ZQER cocok untuk 6 aplikasis: Embedded USB Host Controller, USB-to-Serial Data Acquisition, Portable Diagnostics Equipment, Industrial Communication Gateway, USB Security and Access Terminal, Compact Test and Measurement System.

🖥️

Embedded USB Host Controller

The TUSB6020ZQER fits embedded host designs that require USB 2.0 device management and a compact processor-facing parallel interface. Its dual-role OTG-capable architecture gives the host processor a defined path for enumerating peripherals, exchanging data, and managing USB bus state. The 80-ball VFBGA package occupies only 5 x 5 mm, which is valuable in compact industrial controllers and edge equipment. Implementation requires careful 0.5 mm-pitch escape routing, continuous ground planes, and validation of the exact host-role timing and transceiver arrangement against the manufacturer datasheet.

🏭

USB-to-Serial Data Acquisition

TUSB6020ZQER can serve as the USB-facing controller in compact data-acquisition equipment connected to a host PC or embedded processor. Its USB 2.0 and OTG-related functionality supports the physical and protocol layer required for reliable peripheral communication, while the parallel interface provides a structured connection to local logic. The small 80-ball package helps preserve board area for amplifiers, converters, and sensor circuitry. Designers should budget PCB routing and assembly for the 0.5 mm pitch and verify cable, connector, and USB-speed requirements in the final system architecture.

💊

Portable Diagnostics Equipment

The TUSB6020ZQER is suitable for portable diagnostic instruments that exchange test data with a laptop or service computer over USB 2.0. The controller's 80-ball VFBGA construction provides a high pin and signal density in a compact package, while its parallel interface allows a system processor or FPGA to coordinate acquisition and storage tasks. Commercial temperature grading supports ordinary product environments, although the final enclosure, ambient range, and heat sources must be reviewed. Component placement should prioritize short high-speed escape paths, stable references, and accessible USB test points.

🌐

Industrial Communication Gateway

TUSB6020ZQER can support USB connectivity in an industrial gateway that bridges a host processor to service, configuration, or peripheral devices. USB 2.0 provides a practical interface for configuration transfer and maintenance access, while the dual-role architecture supports designs that must negotiate host and device behavior. The 5 x 5 mm, 80-ball package limits footprint impact in densely populated gateways. Industrial implementation should account for conducted noise, ground continuity, temperature margins, and the exact external transceiver configuration specified by the manufacturer reference design.

📷

USB Security and Access Terminal

The TUSB6020ZQER is appropriate for access-control and security terminals that connect an embedded processor to USB authentication devices, removable media, or peripheral readers. Its USB 2.0 and OTG-oriented dual-role support allows the system to manage device enumeration and role behavior in compact hardware. The small VFBGA package is advantageous inside enclosure-constrained terminals, but assembly yield and inspection must be considered because of the 0.5 mm pitch. Design validation should include USB suspend and resume behavior, bus-power requirements, ESD protection, and all power sequencing conditions.

🔧

Compact Test and Measurement System

TUSB6020ZQER can provide the USB control path in compact test and measurement systems where a laptop supplies commands and retrieves captured data. Its parallel interface supports integration with acquisition logic, FPGA-based signal processing, or a system processor, while the 80-ball package preserves board area for analog front ends. A practical design must preserve USB signal integrity, provide low-impedance supply distribution, and separate sensitive analog and digital return currents. Because the device uses a 0.5 mm-pitch BGA, fine-pitch assembly capability and thermal performance should be evaluated before production.

What is the TUSB6020ZQER?
The TUSB6020ZQER is a Texas Instruments USB 2.0 dual-role controller with OTG support and a parallel processor interface. According to the manufacturer documentation, the device uses an 80-ball VFBGA package measuring 5 x 5 mm with a 0.5 mm ball pitch. It is intended for embedded systems that require USB host, device, or dual-role connectivity implemented with a compact surface-mount package.
What are the key specifications of TUSB6020ZQER that engineers should know?
The TUSB6020ZQER is a USB 2.0, OTG-capable dual-role controller in an 80-ball VFBGA package. Its documented supply rails include 1.5 V, 1.8 V, and 3.3 V, while the package is 5 x 5 mm with a 0.5 mm ball pitch. The device also has a commercial temperature grade and a parallel interface for connection to a host processor. Use the manufacturer datasheet for current limits, timing, and absolute maximum ratings.
What is the operating voltage of TUSB6020ZQER?
The TUSB6020ZQER documentation identifies 1.5 V, 1.8 V, and 3.3 V supply domains, including VDDCM, VDD, VDDA, and VDDDD rails. These are interface and core supply names rather than one universal input range. According to the manufacturer datasheet, each rail should be connected according to its named circuit and decoupling requirements. Exact tolerance and sequencing limits must be taken from the device datasheet.
Where can I download the TUSB6020ZQER datasheet PDF?
The TUSB6020ZQER datasheet PDF is available through the manufacturer-document link listed on this page and through the product listing resources for Texas Instruments. The document covers the USB 2.0 dual-role controller, supply domains, package information, and application details. Before releasing a design, verify the document revision and confirm that the ordering code TUSB6020ZQER matches the variant described in the pin description and electrical tables.
Where can I find the TUSB6020ZQER pinout?
The TUSB6020ZQER uses an 80-ball VFBGA, so its physical connection information must be taken from the manufacturer's ball-grid-array diagram rather than a conventional lead-numbered package drawing. The device is a 5 x 5 mm package with a 0.5 mm ball pitch. Assign every ball, including reserved or power balls, from the pin-description table in the manufacturer datasheet before routing the PCB.
Is TUSB6020ZQER suitable for an embedded USB host or device design?
Yes, the TUSB6020ZQER is suitable for embedded USB host, device, and dual-role implementations that use its parallel processor interface. It supports USB 2.0 operation and OTG functionality in an 80-ball VFBGA package. The exact role configuration, transceiver arrangement, and signal timing still require review against the manufacturer datasheet, particularly for designs using high-speed USB.
What is the difference between TUSB6020ZQER and TUSB6020ZQE?
The TUSB6020ZQER and TUSB6020ZQE identify devices in the same TUSB6020 family, and the documented package configuration is 80-ball VFBGA. Their device-level electrical, pin, and thermal characteristics should be checked in the manufacturer datasheet because the order-code suffix can also encode the supplied packing or shipping form. The documented TUSB6020ZQE-versus-TUSB6020ZQER comparison describes consistent terminals and packages, but procurement should confirm the exact suffix definition before substitution.
TUSB6020ZQER vs TUSB6020PFC - which device should be selected?
Both identifiers appear within the TUSB6020 documentation set, but the order codes should not be treated as automatically interchangeable without checking the manufacturer part-number tables. The TUSB6020ZQER is the 80-ball ZQE-package variant identified on this page, while TUSB6020PFC is another family order code whose exact suffix meaning and packing configuration must be confirmed. Compare pinout, temperature grade, supply ratings, and ordering information before making a replacement.
When should I choose TUSB6020ZQER over another TUSB6020 variant?
Choose TUSB6020ZQER when the required source configuration uses the ZQE 80-ball VFBGA option and the commercial-grade electrical profile satisfies the product requirements. The family identifiers in the documentation include ZQE, PFC, and PFCR forms, but suffix changes may affect ordering, packing, or qualification rather than core USB behavior. Select the exact variant only after matching its datasheet ordering table, ball map, temperature grade, and intended shipping format.
What is the best drop-in replacement for TUSB6020ZQER?
No distinct drop-in replacement can be confirmed from the available technical documentation because the identified TUSB6020 order codes primarily represent suffix or packing variants of the same device family. The TUSB6020ZQE is documented as package- and terminal-consistent with TUSB6020ZQER, but it is not a distinct engineering alternative. For a different controller, obtain a manufacturer-approved cross-reference and compare every ball, supply rail, timing parameter, USB role, and temperature limit before replacing the part.
What can replace TUSB6020ZQER?
The only clearly documented device in the same exact-package family is TUSB6020ZQE, which is reported to have consistent terminals and package characteristics. That makes it a candidate for a procurement substitution when its suffix and packing definition are acceptable, not a different controller offering new functionality. No cross-manufacturer USB 2.0 OTG controller has been verified as a pin-to-pin substitute, so a different function or package should not be treated as a drop-in replacement.
Is TUSB6020ZQER the same as TUSB6020ZQE?
The TUSB6020ZQER and TUSB6020ZQE are documented as having consistent performance characteristics, terminals, and packages. They belong to the same TUSB6020 controller family and use the 80-ball VFBGA configuration. Their exact order-code suffix still determines the purchasable configuration, so engineers should check the manufacturer ordering table for packing, temperature, and shipment details. Treat them as suffix alternatives, not as different controller designs.
What is the best cross-brand equivalent for TUSB6020ZQER?
No cross-manufacturer equivalent has been confirmed as a true drop-in replacement for the TUSB6020ZQER. A USB 2.0 OTG controller with a parallel interface must match the complete 80-ball assignment, supply structure, transceiver expectations, timing, and supported USB roles; matching only the USB version and protocol is insufficient. Use the manufacturer cross-reference process or request a component-engineering review before considering a different manufacturer's controller.
Where to buy TUSB6020ZQER online?
Use the Request a Quote form on this page to ask for TUSB6020ZQER availability, current lead time, and order handling. The request should include the required quantity, target date, and whether the 80-ball ZQE-package commercial-grade configuration is acceptable. For design continuity, state the complete TUSB6020ZQER order code and attach the relevant schematic or bill of materials so configuration differences are not overlooked.
How much does TUSB6020ZQER cost and is it in stock?
Current commercial terms and stock status for TUSB6020ZQER should be obtained through the Request a Quote form on this page. Enter the required quantity and project delivery date so XAIPART can respond with the applicable commercial information and available schedule. For long-running programs, request lifecycle confirmation as well, particularly if the design may move between prototype and production quantities.
What is the lead time for TUSB6020ZQER?
The current lead time for TUSB6020ZQER should be requested through the Request a Quote form on this page. Include prototype, forecast, and committed production quantities separately because their schedules may differ. A buyer should also confirm the exact 80-ball ZQE-package configuration and packing form before accepting a delivery commitment, particularly for designs that use TUSB6020 family suffix variants interchangeably.
Is TUSB6020ZQER compliant with RoHS and REACH?
The RoHS and REACH status of TUSB6020ZQER must be confirmed from the current manufacturer product documentation or declaration associated with the exact order code. The commercial grade and 80-ball VFBGA package do not by themselves establish environmental compliance. Compliance declarations can vary by revision or shipment configuration, so procurement should request the applicable material and substance statements when compliance is a purchasing requirement.
How should a PCB be designed around the 80-ball TUSB6020ZQER package?
Place the TUSB6020ZQER with short, symmetric escape routes and preserve uninterrupted supply and ground distribution around the 80-ball array. Its 0.5 mm ball pitch requires a PCB and assembly process capable of fine-pitch BGA handling. Follow the manufacturer layout examples for decoupling, interface-routing geometry, and return paths. Also verify differential USB routing, test-point access, and thermal-via requirements before releasing the fabrication package.

Data referensi engineering untuk TUSB6020ZQER — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the TUSB6020ZQER when a design requires a USB 2.0 dual-role or OTG-capable controller with a parallel interface and can support an 80-ball, 5 x 5 mm, 0.5 mm-pitch BGA assembly. The documented family identifiers TUSB6020ZQE, TUSB6020PFC, and TUSB6020PFCR appear in the same documentation set, but their suffix differences may reflect ordering or packing configurations rather than genuinely different controllers. Confirm the exact part-number definition before treating them as substitutes. No cross-manufacturer part has been verified as a pin-compatible replacement, so a different USB controller should be considered only after a complete comparison of all 80 balls, voltage domains, parallel-interface timing, USB roles, transceiver architecture, temperature grade, and lifecycle status. For designs that cannot support fine-pitch BGA assembly, specify a different package family rather than attempting a board-level conversion.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 80-ball VFBGA, 5 x 5 mm
Brand Texas Instruments
USB Version USB 2.0
Controller Role Dual-role controller with OTG support
Processor Interface Parallel
Terminal Count 80 terminals
Ball Pitch 0.5 mm
Temperature Grade Commercial
Documented Supply Domains 1.5 V, 1.8 V, and 3.3 V
Mounting Type Surface mount

Diferensiator Kunci

  • Compact high-density integration (vsTUSB6020ZQE)
  • Dual-role OTG-capable USB architecture (vsGeneric USB interface controllers)
  • Fine-pitch package footprint (vsLead-based USB controller packages)

Catatan Desain

Treat the 80-ball, 0.5 mm-pitch arrangement as a fine-pitch BGA design. Route ball escapes directly into the adjacent power, ground, and signal layers, and minimize via transitions wherever the USB interface permits. Confirm the PCB stack-up, pad and solder-mask definitions, via-in-pad policy, and assembly process against the manufacturer's package drawing before releasing artwork.

Preserve continuous reference planes beneath high-speed USB routes and maintain a low-impedance return path. Match USB routing to the manufacturer reference geometry, keep connector and transceiver paths short, and avoid splitting ground planes under the BGA. Use the datasheet's recommended decoupling and external-component placement to prevent supply transients from disturbing USB signaling.

Design the 1.5 V, 1.8 V, and 3.3 V domains as named rails rather than assuming that all supplies share one source. Verify each rail's tolerance, current demand, sequencing requirement, and decoupling arrangement in the manufacturer datasheet. Check startup, suspend, and resume behavior with realistic peripheral loads, and avoid sharing narrow return paths with sensitive analog circuitry.

Do not substitute a controller merely because it supports USB 2.0 or OTG. The replacement must match all 80 balls, supply assignments, parallel-interface timing, USB role behavior, and external-transceiver expectations. Treat TUSB6020 suffix variants as procurement alternatives only after reviewing the ordering table, and validate any engineering change with protocol, power, and USB compliance testing.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The commercial temperature grade is confirmed, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the product information. Obtain current declarations for the exact order code.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

TUSB6020ZQER datasheet TUSB6020ZQER pinout TUSB6020ZQER datasheet pdf TUSB6020ZQER schematic TUSB6020ZQER equivalent TUSB6020ZQER replacement TUSB6020ZQER cross reference TUSB6020ZQER footprint TUSB6020ZQER application circuit TUSB6020ZQER price TUSB6020ZQER stock Texas Instruments TUSB6020ZQER TUSB6020ZQER vs TUSB6020ZQE 80-VFBGA USB 2.0 controller TUSB6020ZQER 1.5V 1.8V 3.3V

Komponen dan Istilah Terkait

Texas Instruments TUSB6020ZQER TUSB6020ZQE TUSB6020PFC TUSB6020PFCR TUSB6020 USB 2.0 USB OTG dual-role controller USB interface controller parallel interface interface IC semiconductor 80-ball VFBGA BGA family surface-mount package 0.5 mm ball pitch 5 x 5 mm package VDDCM VDD VDDA VDDD industrial data acquisition embedded USB host test and measurement
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ