USB2532-1080AEN - 2-Port USB 2.0 Hub | Microchip
MPN: USB2532-1080AEN ✓ AktifUSB2532-1080AEN Ringkasan
A USB hub controller is an interface IC within the USB interface-controller and broader semiconductor hierarchy. It manages traffic between one upstream USB port and multiple downstream ports while providing the electrical and protocol behavior required by USB 2.0 devices. An embedded two-port hub can consolidate peripheral connections, simplify enclosure wiring, and preserve a standard USB interface without requiring a general-purpose host computer.
The USB2532-1080AEN provides two downstream ports, USB 2.0 operation, 1.2 V and 3.3 V supply support, and I2C plus SMBus configuration interfaces. Its 36-SQFN 6 x 6 mm package supports compact PCB layouts, although its exposed thermal-pad layout requires deliberate copper and thermal design. The commercial 0C to +70C temperature range targets room-temperature industrial, communications, and consumer equipment rather than extended-temperature or automotive environments.
Microchip describes the USB2532 as a low-power, OEM-configurable device using Multi-Transaction Translator technology. The USB2532 family also supports configuration options intended to simplify platform integration. According to the manufacturer datasheet, disabled ports can be automatically reordered to match the remaining enabled-port locations, while PortSwap can align differential USB signals directly with connector pin locations and reduce uneven trace-length or crossing requirements.
Typical uses include embedded USB-to-USB expansion, peripheral consolidation, industrial human-machine interfaces, communications equipment, and compact consumer appliances. The two-port structure is especially useful when a product needs exactly two external USB connections but has only one internal host-facing USB port. I2C and SMBus access can support controlled configuration from an embedded controller rather than relying only on fixed board-level behavior.
Designers should preserve the USB differential-pair geometry defined by the manufacturer datasheet, provide the required bypass and decoupling connections, and validate the exposed-pad thermal path. Firmware or controller configuration should also account for port enablement, upstream enumeration, and the intended ordering of downstream connections. The controller supports a practical USB 2.0 topology, but the complete design must satisfy the host, cable, connector, and downstream-device requirements of the target system.
This product page combines the manufacturer specifications, exact package and temperature information, source links, application guidance, and engineering design notes into a focused selection reference. It also distinguishes the confirmed industrial-temperature variant from the commercial USB2532-1080AEN and clearly identifies replacement limitations where a verified drop-in alternative is not established.
Alternatif penggantian untuk USB2532-1080AEN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian USB2532-1080AEN (sama faktor bentuk dan footprint) — berbeda di dalam Product Type.
USB2532I-1080AEN
✅ Drop-InKontak untuk harga
Lihat Datasheet →USB2532-1080AEN Spesifikasi
| Product Type | USB 2.0 two-port hub controller |
| USB Specification | USB 2.0 |
| Downstream Port Count | 2 ports |
| Upstream Port Count | 1 port |
| Supported Supply Voltage | 1.2 V and 3.3 V |
| Control Interface | I2C and SMBus |
| Rentang Suhu Kerja | 0C to +70C |
| Package Type | 36-SQFN |
| Package Dimensions | 6 x 6 mm |
| Jumlah Pin | 36 pins |
| Tipe Mounting | Surface mount |
| Controller Architecture | Multi-Transaction Translator (MTT) |
| Configuration Method | OEM configurable |
| Power Classification | Low-power USB hub controller |
| Status RoHS | RoHS |
| Interface Category | USB interface IC |
| Number of I2C Interfaces | 1 interface |
| Number of SMBus Interfaces | 1 interface |
| Status Lingkungan Hidup | Active product family |
USB2532-1080AEN 6 x 6 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk USB2532-1080AEN (6 x 6 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk USB2532-1080AEN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
USB2532-1080AEN cocok untuk 6 aplikasis: Embedded USB Port Expansion, Industrial Human-Machine Interface, Communications Equipment, USB Peripheral Consolidation, Consumer Appliance Connectivity, Test and Measurement Fixture.
Embedded USB Port Expansion
The USB2532-1080AEN fits embedded equipment that exposes one upstream USB connection to the host but needs two downstream connections for peripherals. Its two-port USB 2.0 architecture replaces a simple one-port USB interface with a controlled hub topology while preserving the standard 480-class USB 2.0 device relationship. The 36-SQFN 6 x 6 mm package also conserves board area compared with a discrete port-multiplication arrangement. Place the controller according to the manufacturer pin and routing guidance, preserve the USB differential-pair geometry, and provide the required 1.2 V and 3.3 V rails. At the system level, validate enumeration, suspend, resume, and fault behavior with every intended peripheral because a hub must manage both upstream and downstream power states.
Direkomendasikan
Industrial Human-Machine Interface
The USB2532-1080AEN can serve as the two-port USB interface in an industrial human-machine interface that combines a control terminal, status display, service connector, or data-acquisition peripheral. The 0C to +70C range suits controlled indoor equipment where temperature remains within commercial limits, and I2C or SMBus connectivity allows an embedded controller to manage configuration alongside the USB hub function. Two downstream ports simplify a common enclosure architecture without requiring two independent USB host controllers. Keep the high-speed differential routes short and impedance-controlled, observe the exposed-pad grounding requirements, and isolate external cables from sensitive circuitry. Validate the complete interface against the target display, touchscreen, or peripheral because hub enumeration can differ from direct device connection.
Direkomendasikan
Communications Equipment
The USB2532-1080AEN is applicable in communications equipment that requires two USB-facing peripheral ports but operates from a single upstream USB connection. The compact 36-SQFN package reduces PCB demand in space-constrained network appliances, while the two-port USB 2.0 topology supports service, diagnostic, or configuration peripherals. Its low-power OEM-configurable architecture is useful where host software must recognize a predictable downstream-port arrangement. The manufacturer documents automatic reordering for disabled ports and PortSwap capability for aligning differential signals with connector locations. Design the routing so port assignment remains predictable, and confirm the required supply rails and thermal-pad connection from the manufacturer datasheet before layout release.
Direkomendasikan
USB Peripheral Consolidation
The USB2532-1080AEN consolidates two USB peripherals behind one upstream interface in kiosks, test fixtures, and compact appliances. Two downstream ports reduce the number of physical connections that must terminate at the main board and provide a defined USB hub topology for peripheral enumeration. The controller supports 1.2 V and 3.3 V supply rails and can be configured through I2C or SMBus, allowing a supervisory controller to coordinate port behavior. To obtain reliable operation, follow the manufacturer layout for the 36-SQFN exposed pad, bypass capacitance, and differential routing. Also test hot-plug, cable removal, and simultaneous-load scenarios because shared upstream bandwidth can affect peripheral performance even when each downstream port operates as a USB 2.0 port.
Direkomendasikan
Consumer Appliance Connectivity
The USB2532-1080AEN can add two downstream USB connections to a compact consumer appliance that already has an upstream host interface. Its 36-SQFN footprint supports space-conscious board layouts, and the 0C to +70C specification fits typical indoor product conditions. A two-port hub arrangement can support a control peripheral and removable storage device, or two service accessories, without doubling the main host interface. I2C and SMBus connectivity provides a route for product-specific configuration and port management. The designer must still account for the voltage-drop and current requirements of the complete USB topology, connector mechanics, shield termination, and USB compliance testing. Verify the exact load and power-management behavior against the manufacturer datasheet rather than assuming that downstream-device power is supplied independently.
Direkomendasikan
Test and Measurement Fixture
The USB2532-1080AEN is suitable for a compact automated test fixture that needs to present two downstream USB ports to a single host connection. The controller can provide a repeatable two-port topology for instrument control, programming, or logging peripherals, while OEM configurability supports integration with the fixture controller. The 6 x 6 mm SQFN package reduces connector congestion around densely populated test hardware. Preserve the manufacturer-recommended USB differential geometry and provide a continuous thermal path through the exposed pad. During fixture validation, test enumeration order, disconnect behavior, simultaneous downstream loads, and recovery after bus faults. Because the target is specified for 0C to +70C, select an appropriate enclosure temperature strategy or evaluate the USB2532I-1080AEN for wider-range installations.
Direkomendasikan
Data referensi engineering untuk USB2532-1080AEN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | USB2532I-1080AEN |
|---|---|---|
| Product Type | USB 2.0 two-port hub controller | USB 2.0 two-port hub controller |
| Brand | Microchip Technology | Microchip Technology |
| Package | 36-SQFN (6 x 6 mm) | 36-SQFN (6 x 6 mm) |
| Downstream Ports | 2 ports | 2 ports |
| USB Specification | USB 2.0 | USB 2.0 |
| Pin Count | 36 pins | 36 pins |
Diferensiator Kunci
- Compact two-port hub integration (vsUSB2532I-1080AEN)
- Defined commercial operating range (vsUSB2532I-1080AEN)
- Integrated configuration connectivity (vsUSB2532I-1080AEN)
Catatan Desain
Use the USB2532 manufacturer layout guidance as the controlling reference for the upstream and downstream differential pairs. Keep D+ and D- traces tightly coupled, minimize stubs and unnecessary vias, and avoid routing them across split planes or aggressive power-distribution discontinuities. PortSwap can help align differential signals with connector positions, but it does not replace proper impedance control or via symmetry. Confirm the final USB trace geometry with the stack-up used in the production PCB and verify the complete channel through compliance testing.
Treat the exposed pad of the 36-SQFN package as both a thermal and electrical construction feature. Follow the manufacturer datasheet for its connection to the ground plane, then provide uninterrupted copper and thermal vias where recommended. Limit copper heat flow into sensitive USB signal areas if necessary, while ensuring the controller still has a low-impedance return path. Validate the assembly using the actual enclosure, airflow, board stack-up, and highest expected ambient temperature rather than relying on a nominal package dimension alone.
Design the 1.2 V and 3.3 V rails for the controller and the complete USB topology separately from connector-level downstream power requirements. Place the manufacturer-specified bypass capacitors close to their associated supply pins and observe the datasheet's startup, operating, and decoupling instructions. USB peripheral current, cable losses, and inrush at connection can create transients that a nominal regulator rating alone does not cover. Validate suspend, resume, hot-plug, and repeated downstream-device insertion with realistic loads before production release.
Do not assume that any two-port USB 2.0 controller is interchangeable solely because its connector count matches. Before using the USB2532I-1080AEN in place of the USB2532-1080AEN, compare the complete pin descriptions, electrical limits, exposed-pad requirements, configuration behavior, temperature grade, and port-order logic. Firmware may also need adjustment if the I-suffix variant changes default behavior. A successful PCB fit is not sufficient evidence of drop-in equivalence; system-level USB enumeration and peripheral tests must also pass.
Informasi Konformitas
The Microchip-linked product listing identifies the device as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status is stated.