Nuvoton Technology Corporation

W77M032A25FL - 8-Bit 25MHz MCU, 36 I/O | Nuvoton

MPN: W77M032A25FL ✓ Aktif
44-pin BQFP Package 25 MHz Speed External ROM Memory
MOQ: 1 |

W77M032A25FL Ringkasan

The Nuvoton Technology Corporation W77M032A25FL is an 8-bit ROMless microcontroller operating at up to 25 MHz, with 1 KB x 8 RAM, 36 general-purpose I/O pins, and a 44-pin BQFP package. Its 36 available I/O positions make it suitable for compact embedded-control systems that need broad digital connectivity without moving to a larger mixed-signal MCU package.

An 8-bit microcontroller is a compact processor designed around an 8-bit data bus and integrated memory, peripherals, and I/O. The W77M032A25FL belongs to the MCU hierarchy used for real-time control, digital interface, measurement, and automation tasks. Unlike a general-purpose processor, it is intended to execute embedded control code close to the sensors, switches, indicators, and communication interfaces connected to its pins.

The device provides 1 KB x 8 of SRAM and up to 25 MHz operation. Its internal oscillator supports designs that do not require an external clock source. The 36-I/O configuration supports multiple digital inputs and outputs on a single 44-BQFP device, reducing the need for external I/O expanders in moderate-complexity control designs. The exact embedded program-memory arrangement and peripheral configuration should be confirmed in the manufacturer datasheet before final firmware and PCB design.

As a ROMless MCU, application code must be loaded into external program memory rather than residing in an on-chip ROM. The system designer therefore needs to account for the external memory interface, address routing, and programming implementation in the board-level architecture. This makes the device more appropriate for designs with an established external-memory path than for cost-sensitive designs that favor integrated flash memory.

Typical uses include industrial keypad and panel control, digital instrumentation, simple motor or relay sequencing, embedded timers, LED status and annunciation systems, and compact automation controllers. Its 36 I/O pins are especially useful when a design must connect multiple discrete inputs and outputs while retaining a 44-pin surface-mount footprint.

The primary design consideration is firmware and memory-interface validation. Confirm the external memory requirements, reset behavior, clock configuration, programming method, and complete peripheral assignment in the manufacturer datasheet before schematic release. PCB layout should preserve short, clean routes for clock, reset, and external-memory signals while allowing adequate decoupling around the supply pins.

This product page consolidates the verified device specifications, source links, application guidance, design cautions, and replacement analysis into one engineering-focused reference. It also distinguishes confirmed electrical facts from parameters that require confirmation before schematic, firmware, or PCB sign-off.

Alternatif penggantian untuk W77M032A25FL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

W77M032A25FL Rating Maksimal & Karakteristik Listrik

Product Type 8-bit ROMless microcontroller
CPU Architecture 8 bit
Maximum Clock Speed 25 MHz
RAM Size 1 KB x 8
Number of I/O Pins 36 pins
Program Memory Type External ROM
Oscillator Type Internal
Paket 44-pin BQFP
Package Type Surface-mount BQFP
Tipe Mounting Surface mount

W77M032A25FL surface-mount bqfp Diamant Konfigurasi Panduan

Konfigurasi pin untuk W77M032A25FL (surface-mount bqfp pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai surface-mount bqfp untuk W77M032A25FL

Tidak ada data diatribut pin yang tersedia untuk W77M032A25FL.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

W77M032A25FL cocok untuk 6 aplikasis: Industrial Control Panel, Digital Instrumentation, LED Status and Annunciation, Simple Relay and Sequencer Control, Keypad and Menu Interface, Embedded Timer and Counter System.

🏭

Industrial Control Panel

The W77M032A25FL fits compact control-panel designs that require many discrete inputs and outputs without requiring a large processor. Its 36 I/O pins provide ample connections for pushbuttons, selector switches, indicator lamps, relays, and status LEDs, while the 8-bit CPU and 25 MHz maximum operating speed suit real-time panel-state handling. The ROMless architecture means the board must also provide the compatible external program memory. According to the manufacturer datasheet, the device has 1 KB x 8 of SRAM for working data. Before release, confirm the operating-temperature range, supply limits, reset behavior, and memory timing for the intended industrial environment.

🔧

Digital Instrumentation

The W77M032A25FL can support front-panel instrumentation that reads switches, drives displays, manages alarm indicators, and coordinates measurement-control functions. With 36 I/O pins, the device can connect multiple digital controls and output signals while retaining a single 44-BQFP footprint. The 25 MHz operating speed provides a practical platform for embedded state machines and timing functions, and the 1 KB x 8 SRAM supports working variables. As a ROMless part, it requires an established external program-memory path. According to the manufacturer datasheet, an internal oscillator is included. Verify the complete peripheral map, display interface requirements, and maximum clock conditions before implementation.

💡

LED Status and Annunciation

The W77M032A25FL is suitable for LED status panels, annunciators, and sequential indicator controllers where multiple outputs must be coordinated under a compact control architecture. Its 36 I/O pins allow numerous LEDs and associated digital inputs to share one controller, while the 8-bit processor and 25 MHz maximum clock can implement timing, blinking patterns, and interlocks. The device's 1 KB x 8 SRAM can hold state variables for multiple channels. According to the manufacturer datasheet, the part is ROMless and includes an internal oscillator. Confirm current limits, output-drive characteristics, and external-memory requirements before assigning loads directly to I/O pins.

⚡

Simple Relay and Sequencer Control

The W77M032A25FL can act as the sequencing controller for relays, contactors, valves, and discrete actuators in a compact embedded system. The 36 available I/O pins accommodate multiple command and feedback signals, while the 8-bit CPU at up to 25 MHz supports deterministic software sequencing and interlocks. Its 1 KB x 8 of RAM is intended for runtime state rather than large data buffers, so the design should keep buffering requirements modest. According to the manufacturer datasheet, the MCU is ROMless. Use external transistors, isolation, and protection networks as required rather than driving inductive loads directly; confirm pin ratings and timing characteristics from the manufacturer datasheet.

🖥️

Keypad and Menu Interface

The W77M032A25FL supports keypad, rotary-switch, and menu-driven equipment interfaces where several inputs must be scanned and status outputs coordinated. Its 36 I/O pins provide substantial parallel I/O capacity for matrix keys, mode controls, indicator LEDs, and display-control signals. At a maximum clock speed of 25 MHz, the 8-bit controller can handle debouncing, key mapping, and menu state efficiently, while 1 KB x 8 of RAM provides working memory for interface state. According to the manufacturer datasheet, the device uses an external program-memory arrangement and an internal oscillator. Validate scan timing, interrupt behavior, and external-memory access before finalizing the firmware.

⏱️

Embedded Timer and Counter System

The W77M032A25FL is appropriate for timer, event-counter, and small automation subsystems that require multiple digital inputs and outputs around a compact controller. Its 8-bit architecture and 25 MHz operating capability are suitable for pulse counting, debounced event detection, duty-cycle control, and coordinated discrete outputs. The 36-I/O configuration lets the same device handle sensor inputs, start or stop signals, and status outputs. According to the manufacturer datasheet, the MCU includes 1 KB x 8 of SRAM and an internal oscillator but has no internal program ROM. Confirm timer resolution, interrupt priorities, external-memory timing, and I/O electrical limits before deployment.

What is the W77M032A25FL?
The W77M032A25FL is an 8-bit ROMless microcontroller from Nuvoton Technology Corporation. According to the manufacturer datasheet, the device operates at up to 25 MHz, includes 1 KB x 8 of SRAM, provides 36 I/O pins, and is packaged in a 44-BQFP. Because it is ROMless, application firmware is expected to execute from external program memory rather than from internal ROM.
What are the key specifications of W77M032A25FL?
The principal W77M032A25FL specifications are an 8-bit CPU, a maximum clock frequency of 25 MHz, 1 KB x 8 of SRAM, 36 I/O pins, and a 44-BQFP package. The manufacturer datasheet also identifies an internal oscillator. The confirmed parameter set makes the device suitable for embedded-control boards requiring multiple digital I/O points, while program-memory and operating-voltage details must be checked before a design is released.
Where can I download the W77M032A25FL datasheet PDF?
The W77M032A25FL datasheet PDF is available through the datasheet link on this page, with additional document copies listed in the source section. According to the manufacturer datasheet, the document describes the device as an 8-bit microcontroller and contains 76 pages. Use the pin-description table, memory-interface section, and electrical-characteristics tables for final schematic and firmware validation.
Where can I find the W77M032A25FL pinout?
The W77M032A25FL uses a 44-pin BQFP package, and its complete numbered pin assignment should be taken from the manufacturer datasheet pinout and pin-description tables. A schematic capture symbol alone is not sufficient because power, ground, oscillator, reset, and external-memory functions must match their physical pin numbers exactly. Use the package drawing and pin table together before assigning PCB nets.
What is the operating voltage of W77M032A25FL?
The operating-voltage range of the W77M032A25FL is not established by the available product records, so it must be confirmed in the manufacturer datasheet before power-supply design. According to the manufacturer datasheet, the device includes an internal oscillator and is designed for operation in a 44-pin BQFP package. Check the DC characteristics table for both the specified operating range and absolute maximum ratings.
Does W77M032A25FL contain internal program memory?
No internal ROM is indicated by the W77M032A25FL description as an 8-bit ROMless microcontroller. Application code therefore requires an external program-memory implementation unless the board already provides a compatible memory interface. According to the manufacturer datasheet, the MCU contains 1 KB x 8 of RAM and can operate at 25 MHz. Verify address mapping and external timing before assigning memory addresses in firmware.
What can replace the W77M032A25FL?
A genuine replacement for the W77M032A25FL must preserve its 44-BQFP footprint, pin assignments, external-memory interface, 25 MHz operating class, and firmware-compatible peripheral behavior. No substitute with confirmed pin-to-pin compatibility was identified in the available cross-reference records. Do not substitute a similarly named or 44-pin device unless the manufacturer confirms mechanical, electrical, timing, and software compatibility.
Is W77M032A25FL the same as a generic 44-pin 8-bit MCU?
No. A generic 44-pin 8-bit MCU is not necessarily interchangeable with the W77M032A25FL. According to the manufacturer datasheet, this part has 1 KB x 8 of SRAM, 36 I/O pins, an internal oscillator, and a maximum clock speed of 25 MHz. A drop-in candidate must additionally match the external program-memory interface, pinout, reset behavior, timing, and peripheral assignments.
When should I choose W77M032A25FL over another 8-bit MCU?
Choose the W77M032A25FL when a design specifically targets its 44-BQFP pinout, 36 available I/O positions, 1 KB x 8 RAM arrangement, internal oscillator, and external program-memory architecture. According to the manufacturer datasheet, its confirmed 25 MHz operating speed supports compact embedded-control tasks. Select another MCU when integrated flash, a different pin count, a different memory interface, or a different peripheral set provides a better architectural fit.
Is W77M032A25FL suitable for an industrial control panel?
The W77M032A25FL can be suitable for a compact digital control panel because it provides 36 I/O pins and operates at up to 25 MHz. According to the manufacturer datasheet, the device is an 8-bit ROMless MCU with 1 KB x 8 of RAM and an internal oscillator. Confirm operating-temperature limits, supply tolerances, reset performance, and external-memory timing before using it in an industrial environment.
Where to buy W77M032A25FL online?
Use the Request a Quote form on this page to request W77M032A25FL availability, current lead time, and an order quotation. The part is an 8-bit, 25 MHz ROMless MCU with 36 I/O pins in a 44-BQFP package according to the manufacturer datasheet. The quotation form provides a direct purchasing channel without embedding a price that may change with market conditions.
What is the price of W77M032A25FL?
The current W77M032A25FL price should be requested through the Request a Quote form on this page because quotations and availability can change with quantity and market conditions. The manufacturer datasheet identifies the device as an 8-bit, 25 MHz ROMless MCU with 1 KB x 8 of RAM and 36 I/O pins in a 44-BQFP package. Submit the required quantity and packaging details for a current quotation.
What is the lead time for W77M032A25FL?
Request the current W77M032A25FL lead time through the Request a Quote form on this page. According to the manufacturer datasheet, the target is an 8-bit ROMless MCU rated up to 25 MHz, with 1 KB x 8 of SRAM, 36 I/O pins, and a 44-BQFP package. Include your required quantity, production schedule, and acceptable package-delivery format when requesting the quotation.
Is W77M032A25FL in stock?
Current W77M032A25FL stock status should be confirmed through the Request a Quote form on this page. The manufacturer datasheet confirms a 25 MHz, 8-bit ROMless MCU with 1 KB x 8 of RAM, 36 I/O pins, and a 44-BQFP package. Provide the required quantity and target delivery date so the current inventory position and available delivery options can be reviewed.
What is the best Nuvoton equivalent for W77M032A25FL?
No Nuvoton drop-in equivalent for the W77M032A25FL was confirmed with sufficient pin-level evidence to recommend one. According to the manufacturer datasheet, the target device is a 25 MHz, 8-bit ROMless MCU with 1 KB x 8 of RAM, 36 I/O pins, and a 44-BQFP package. A valid same-manufacturer replacement must match that footprint and the external program-memory interface; otherwise, a board-level redesign may be necessary.
How should W77M032A25FL power and clock connections be designed?
Power the W77M032A25FL from the voltage range and decoupling requirements listed in the manufacturer datasheet, and connect the internal-oscillator implementation exactly as specified. According to the manufacturer datasheet, the device operates up to 25 MHz and includes an internal oscillator. Place bypass capacitors close to the supply pins and keep clock, reset, and external-memory traces short and free from aggressive switching-node coupling.

Data referensi engineering untuk W77M032A25FL — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the W77M032A25FL when the board already accommodates its 44-BQFP footprint and needs an 8-bit ROMless MCU with 36 I/O pins, 1 KB x 8 of RAM, an internal oscillator, and operation up to 25 MHz. It is particularly suitable for compact control panels, digital instruments, LED annunciators, keypad interfaces, relay sequencers, and embedded timers. Do not select it merely because another device also has 44 pins; the external program-memory interface, pinout, timing, and firmware must also match. No alternative with confirmed drop-in compatibility was identified, so a redesign candidate should be compared mechanically and electrically before use. For new designs requiring integrated flash, greater memory, or a different peripheral set, a different MCU family may be more appropriate.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Package 44-pin BQFP
Brand Nuvoton Technology Corporation
CPU Architecture 8 bit
Maximum Clock Speed 25 MHz
RAM Size 1 KB x 8
Number of I/O Pins 36 pins
Program Memory External ROM
Oscillator Type Internal

Diferensiator Kunci

  • High I/O density for a compact 8-bit control platform (vsNo verified drop-in alternative was available for comparison)
  • Defined external-memory MCU architecture (vsNo verified drop-in alternative was available for comparison)
  • Compact integration of RAM, oscillator, and digital control (vsNo verified drop-in alternative was available for comparison)

Catatan Desain

Assign the external program-memory interface, oscillator, reset, and all 36 I/O positions from the manufacturer datasheet pin table before releasing the schematic. Confirm that the 44-BQFP footprint matches the selected mechanical drawing, including pin numbering and exposed-pad or thermal requirements. Route clock and memory signals away from relays, switching regulators, and other high-current paths to reduce timing disturbance and false resets.

Size the supply network for the manufacturer datasheet operating range and verify the current consumed by the MCU and external program memory across active and idle states. Place the required bypass capacitors at the power pins using short ground returns. Because no operating-voltage limits were confirmed in the available device records, do not infer them from the 25 MHz clock rating; check the DC characteristics table before selecting a regulator or protection scheme.

Do not treat the 44-pin BQFP package or the 25 MHz clock rating as proof of interchangeability. A true replacement must also match the external-memory architecture, 36 I/O assignments, reset behavior, timing, and firmware expectations. The W77M032A25FL is ROMless, so assuming internal flash or adapting software without checking the memory map can result in a nonfunctional board.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes were not confirmed in the available device records. Check the manufacturer datasheet and current product documentation before using the W77M032A25FL in a regulated or automotive design.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

W77M032A25FL datasheet W77M032A25FL specifications W77M032A25FL pinout W77M032A25FL datasheet pdf W77M032A25FL equivalent W77M032A25FL replacement W77M032A25FL cross reference W77M032A25FL 25MHz microcontroller W77M032A25FL 44 BQFP W77M032A25FL price W77M032A25FL stock Nuvoton W77M032A25FL W77M032A25FL application circuit W77M032A25FL footprint

Komponen dan Istilah Terkait

Nuvoton Technology Corporation W77M032A25FL 8-bit microcontroller microcontroller MCU ROMless microcontroller embedded controller semiconductor 1 KB x 8 SRAM 25 MHz 36 I/O pins 44-pin BQFP surface-mount package internal oscillator external program memory industrial control panel digital instrumentation LED annunciation relay sequencing keypad interface embedded timer operating voltage reset behavior pin-compatible replacement firmware compatibility
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ