Cirrus Logic Inc.

WM8731SEDS/V - 24-Bit Stereo Codec with Headphone Driver | Cirrus Logic

MPN: WM8731SEDS/V ✓ Aktif
2.7 V to 3.6 V Vdss 28-pin SSOP Package
MOQ: 1 |

WM8731SEDS/V Ringkasan

The Cirrus Logic WM8731SEDS/V is a 24-bit stereo audio codec with an integrated headphone driver, programmable sample rates up to 96 kHz, and a 28-pin SSOP package. It operates from a 2.7 V to 3.6 V analog supply and supports an ambient temperature range of -40°C to 85°C. The device is designed for portable Internet audio, multimedia, communications, and other embedded systems requiring digital audio conversion and headphone-output support.

An audio codec is an interface IC that converts digital audio samples into analog signals and converts analog audio inputs into digital data. Its hierarchy includes audio codec, audio interface IC, signal-conversion device, and semiconductor. The WM8731SEDS/V integrates stereo conversion, digital audio interfaces, gain control, and headphone drive into one device, reducing the number of external components required in portable and embedded audio equipment.

Key features include 24-bit resolution, programmable sampling rates, a stereo headphone driver, and operation from 2.7 V to 3.6 V. The 96 kHz maximum sample rate supports higher-bandwidth digital audio streams than designs limited to 48 kHz. Its integrated headphone stage is particularly useful where the design needs amplified stereo output without a separate headphone amplifier.

The part uses a 28-pin SSOP package and is controlled through a serial audio interface and digital control interface. Exact interface timing, supported data formats, clock requirements, filter characteristics, and register addresses are defined by the manufacturer datasheet. System designers should treat the digital interface configuration and analog power arrangement as critical parts of the implementation rather than treating the codec as a simple standalone converter.

Typical uses include portable media players, personal audio devices, headset electronics, internet appliances, voice-processing equipment, and embedded audio systems. It is also appropriate for prototype platforms that require a conventional stereo codec with an integrated headphone output. In these systems, the codec can sit between a digital audio processor and analog headphones or line-level circuitry.

When designing the circuit, use the pin-description and reference-layout information in the manufacturer datasheet to implement supply decoupling, analog and digital grounding, clock routing, and output filtering. Confirm that the external clock, interface voltage levels, supported audio format, and bypass-capacitor values match the intended system before releasing the PCB layout.

This page combines the verified WM8731SEDS/V product identity, technical-package details, sourcing information, carefully qualified alternatives, comparison data, and practical integration guidance. It also distinguishes documented drop-in candidates from functional alternatives that would require different packages, footprints, or interface verification.

Alternatif penggantian untuk WM8731SEDS/V — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian WM8731SEDS/V (sama faktor bentuk dan footprint) — berbeda di dalam Headphone Driver.

Cirrus Logic Inc.
Headphone Driver: Integrated

WM8731SEDS

✅ Drop-In
📦 28-SSOP
Same core device and 28-SSOP package family; the listed difference is packaging specification, with the /V suffix removed.

📋 Alternatif referensi (tidak dalam katalog)

WM8731SEDS/RV

✅ Drop-In
Cirrus Logic Inc.
📦 28-SSOP
Stereo audio codec with headphone driver · 24 bit · 24-bit serial interface · 2.7 V to 3.6 V · -40°C to +85°C · SSOP-28 · 208 mil · 28 pins

Kontak untuk harga

Lihat Datasheet →

WM8731S

✅ Drop-In
📦 28-SSOP
Same-series base part with identical core parameters; the exact package and ordering suffix must be confirmed because WM8731S is less specific than WM8731SEDS/V.

📋 Alternatif referensi (tidak dalam katalog)

WM8731SEDS/V Rating Maksimal & Karakteristik Listrik

Product Type Stereo audio codec with headphone driver
Audio Interface Resolution 24 bit
Maximum Sample Rate 96 kHz
Analog Supply Voltage Range 2.7 V to 3.6 V
Rentang Suhu Kerja -40°C to 85°C
Paket 28-pin SSOP
Headphone Driver Integrated stereo headphone driver
Channel Configuration Stereo
Sample Rate Control Programmable
Tipe Mounting Surface mount

WM8731SEDS/V 28-pin ssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk WM8731SEDS/V (28-pin ssop pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 28-pin ssop untuk WM8731SEDS/V

Tidak ada data diatribut pin yang tersedia untuk WM8731SEDS/V.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

WM8731SEDS/V cocok untuk 6 aplikasis: Portable Internet Audio Player, Headset and Headphone Electronics, Voice Processing and Communications Terminal, Embedded Multimedia and IoT Audio Node, Digital Audio Development Platform, Stereo Line-Level Audio Interface.

📱

Portable Internet Audio Player

The WM8731SEDS/V fits portable Internet audio players that require high-resolution playback from a compact, low-voltage device. Its 24-bit resolution preserves detailed digital-audio data, while programmable sample rates up to 96 kHz support both conventional media rates and higher-rate content. The integrated stereo headphone driver removes the need for a separate output stage in many portable designs, reducing board area. Because the operating range is 2.7 V to 3.6 V, the codec can sit beside a compatible low-voltage digital processor, subject to the clock, interface, and supply sequencing requirements in the manufacturer datasheet.

🎧

Headset and Headphone Electronics

The WM8731SEDS/V is well suited to headset electronics because its integrated stereo headphone driver provides an integrated path from digital audio data to amplified output. The 24-bit conversion capability is useful for voice, music, and communication products that receive audio from a digital processor. A 96 kHz maximum sample rate covers higher-rate playback scenarios, while the 28-pin SSOP package supports compact layouts. Headphone impedance, maximum output level, and cable-loading requirements should be checked against the electrical characteristics rather than inferred from the resolution rating alone.

🌐

Voice Processing and Communications Terminal

The WM8731SEDS/V can support voice-processing terminals, intercom endpoints, and communications products that combine microphone capture with headphone or line playback. Its stereo codec architecture provides 24-bit conversion and programmable sampling rates, allowing the system to select an appropriate operating point for speech, media, or mixed audio traffic. The 2.7 V to 3.6 V supply range is useful in embedded equipment, but clocking, serial word length, and supported digital formats must match the host processor. Analog input and output filtering should follow the application circuit in the manufacturer datasheet.

🧩

Embedded Multimedia and IoT Audio Node

The WM8731SEDS/V provides a practical audio front end for embedded multimedia and connected devices that must generate or monitor stereo sound. Its 24-bit interface, programmable sample rates up to 96 kHz, and integrated headphone output support consumer-facing audio functions without a large analog subsystem. The 28-pin SSOP package is suitable for conventional surface-mount assembly, while low-voltage operation supports compact embedded boards. Designers should reserve space for the manufacturer-recommended bypass capacitors and route the digital interface away from sensitive analog input and output nodes.

🖥️

Digital Audio Development Platform

The WM8731SEDS/V is useful on development platforms intended to prototype digital-audio acquisition, playback, and control software. Its 24-bit codec architecture exposes the conversion process to the host processor, while programmable sample rates make it possible to evaluate multiple operating configurations. The integrated headphone driver allows engineers to verify audible output with fewer external components. The 28-SSOP package requires careful footprint design, and the host interface must support the codec's required clocking and data format. A platform-level audio path can also facilitate comparison with higher-performance converters during prototype evaluation.

🔧

Stereo Line-Level Audio Interface

The WM8731SEDS/V can serve as the stereo conversion element in an embedded line-level interface when the design also requires headphone output. Its 24-bit resolution and programmable sampling up to 96 kHz support digital-audio capture and playback through one codec, and the 2.7 V to 3.6 V operating range simplifies integration with compatible low-voltage analog circuitry. Use the manufacturer reference circuit to establish grounding, input and output filtering, and bypass requirements. The headphone stage should not be assumed to replace a line driver when longer cables or higher-impedance loads are involved.

What are the key specifications of WM8731SEDS/V that engineers should know?
The WM8731SEDS/V is a 24-bit stereo audio codec with an integrated headphone driver, a maximum sample rate of 96 kHz, a 2.7 V to 3.6 V operating-voltage range, and a 28-pin SSOP package. According to the manufacturer datasheet, it also supports programmable sample rates and operation from -40°C to 85°C. These characteristics make it suited to portable and embedded audio systems requiring digital-to-analog conversion, analog-to-digital conversion, and amplified headphone output in one package.
What type of component is the WM8731SEDS/V?
The WM8731SEDS/V is a 24-bit stereo audio codec with an integrated headphone driver. An audio codec belongs to the interface-IC hierarchy because it connects digital audio data to analog audio circuitry. According to the manufacturer datasheet, the device supports programmable sample rates up to 96 kHz and operates from a 2.7 V to 3.6 V supply. Its integrated headphone stage can simplify portable audio equipment by reducing the need for a separate output amplifier.
What is the operating voltage of WM8731SEDS/V?
The WM8731SEDS/V operates from 2.7 V to 3.6 V, as stated in the manufacturer datasheet. This voltage range should be checked against the tolerances and sequencing requirements of the digital and analog supply rails in the intended design. Use the datasheet power-supply and decoupling recommendations when assigning capacitor values, and verify that all connected processors and audio amplifiers remain compatible with the selected rail voltages.
What is the maximum sample rate of WM8731SEDS/V?
The WM8731SEDS/V supports a maximum sample rate of 96 kHz. According to the manufacturer datasheet, the device also provides 24-bit resolution and programmable sample rates. This allows it to process higher-bandwidth stereo audio data than a 48 kHz-only codec while keeping the signal path in a single integrated component. The host processor, serial interface, clock source, and downstream software must all support the selected rate.
Does WM8731SEDS/V include a headphone driver?
Yes, the WM8731SEDS/V includes an integrated stereo headphone driver. This feature allows digital audio to reach amplified headphone outputs without a separate discrete headphone amplifier in many designs. According to the manufacturer datasheet, the codec combines this driver with 24-bit conversion and programmable sampling up to 96 kHz. Headphone impedance, cable length, output level, and the use of any external filtering should still be checked against the application requirements.
Where can I download the WM8731SEDS/V datasheet PDF?
The WM8731SEDS/V datasheet PDF is available through the listed manufacturer-documentation links on this page, including the Wolfson Microelectronics datasheet repository and the Octopart datasheet entry. The document is the primary source for register definitions, electrical characteristics, pin descriptions, application circuits, and recommended external components. Review the 65-page document identified by the datasheet repository and use its pin-description table when assigning PCB nets.
Where can I find the WM8731SEDS/V pinout?
The WM8731SEDS/V pinout is defined in the manufacturer datasheet, which identifies the device as a 28-pin SSOP. Use the pin-description table and package drawing in that document to assign power, ground, clock, serial-data, control, analog-audio, and headphone-output connections. The accessible search excerpts do not reproduce every individual pin name, so the complete numbered pin list is not duplicated here; follow the datasheet table exactly when creating the schematic and PCB footprint.
What applications are suitable for WM8731SEDS/V?
The WM8731SEDS/V is suitable for portable Internet audio, personal audio devices, headset electronics, embedded multimedia systems, and voice-processing products. Its 24-bit resolution, programmable sampling up to 96 kHz, integrated headphone driver, and 28-pin SSOP package provide a compact audio signal path. According to the manufacturer datasheet, the device is intended for portable audio applications where low supply voltage, compact packaging, and integrated headphone drive are valuable.
What is the best drop-in replacement for WM8731SEDS/V?
No alternative could be verified as a fully confirmed five-part drop-in replacement set for the WM8731SEDS/V from the accessible cross-reference information. WM8731SEDS, WM8731SEDS/RV, and WM8731S are identified as closely related members of the same family, but their suffix and packaging differences require confirmation against the manufacturer ordering table before substitution. Do not treat a functional stereo codec as a drop-in replacement unless its package, pinout, supply voltage, clocking, and digital interface are identical.
Can WM8731S replace WM8731SEDS/V?
WM8731S can potentially serve as a related-family alternative, but it should not be approved as a drop-in replacement without package and suffix verification. The cross-reference information identifies WM8731S as a base part in the same series with identical core parameters. According to the manufacturer ordering information, however, the final suffix can encode lead finish, reel configuration, or other ordering details. Confirm that the selected WM8731S configuration matches the original 28-pin SSOP footprint and electrical requirements.
What can replace WM8731SEDS/V?
The closest identified replacement candidates are the related Cirrus Logic orderable variants WM8731SEDS, WM8731SEDS/RV, and WM8731S, but the available cross-reference material does not establish five independently qualified drop-in substitutes. WM8731SEDS is described as using the same die with different packaging, while WM8731SEDS/RV is identified as equivalent. Review the ordering table and datasheet for every suffix before using any of them in a released design.
Is PCM3060PW the same as WM8731SEDS/V?
No, PCM3060PW is not established as the same device or as a pin-compatible drop-in replacement for the WM8731SEDS/V. The accessible comparison identifies it only as a similar 24-bit stereo codec with comparable interfaces. Because its package, pin assignments, clock requirements, and control register set may differ, it can require schematic and PCB-layout changes. Treat PCM3060PW as a functional alternative unless a direct manufacturer cross-reference confirms mechanical and electrical compatibility.
When should I choose WM8731SEDS/V instead of a generic stereo codec?
Choose the WM8731SEDS/V when a design needs a 24-bit stereo codec with programmable sample rates up to 96 kHz, operation from 2.7 V to 3.6 V, and an integrated headphone driver in a 28-pin SSOP. Its integrated output stage can reduce external circuitry in portable and headset designs. Select a generic codec instead when its interface, clocking, package, or codec features align better, but verify the consequences of changing the footprint and control software.
Is WM8731SEDS/V suitable for portable audio equipment?
Yes, the WM8731SEDS/V is suitable for portable audio equipment because it combines 24-bit stereo conversion, programmable sampling up to 96 kHz, and a headphone driver within a compact 28-pin SSOP package. Its 2.7 V to 3.6 V operating range is appropriate for low-voltage portable systems. According to the manufacturer datasheet, the device is explicitly described for portable Internet audio, supporting its use in media, headset, and connected personal-audio products.
Where can I buy WM8731SEDS/V and check the current lead time?
Use the Request a Quote form on this page to request the current WM8731SEDS/V price, stock position, minimum order quantity, and production lead time. The structured pricing fields are intentionally omitted because no listing in the accessed results displayed an explicit quantity-break price for this exact MPN. The request form also helps confirm the desired lead time, package configuration, quantity, and any scheduled-production considerations before the part is placed on a BOM.

Data referensi engineering untuk WM8731SEDS/V — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose WM8731SEDS/V for a portable or embedded audio design that needs a 24-bit stereo codec, programmable sample rates up to 96 kHz, and an integrated headphone driver in a 28-pin SSOP. The 2.7 V to 3.6 V operating range suits compatible low-voltage systems. Select WM8731SEDS or WM8731SEDS/RV only after confirming that the manufacturer ordering table permits the required packaging configuration; their core ratings are the same, but suffix and reel handling can differ. WM8731S is a less-specific family member whose final ordering details must be verified. PCM3060PW should be considered only as a functional alternative unless its package and pinout are proven identical, because the accessible comparison does not establish drop-in compatibility. Before choosing any substitute, check supply voltage, digital interface, clocking, register compatibility, and PCB footprint.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini WM8731SEDS WM8731SEDS/RV WM8731S
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP
Audio Resolution 24 bit 24 bit 24 bit 24 bit
Maximum Sample Rate 96 kHz 96 kHz 96 kHz 96 kHz
Operating Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V
Operating Temperature Range -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C
Headphone Driver Integrated stereo headphone driver Integrated stereo headphone driver Integrated stereo headphone driver Integrated stereo headphone driver
Channel Configuration Stereo Stereo Stereo Stereo
Sample Rate Control Programmable Programmable Programmable Programmable

Diferensiator Kunci

  • Integrated headphone output reduces external circuitry (vsPCM3060PW)
  • High-resolution conversion with higher-rate support (vsPCM3060PW)
  • Existing 28-SSOP platform continuity (vsWM8731S)

Catatan Desain

Implement the input, output, and bypass networks with the exact capacitance and placement values shown in the manufacturer datasheet. Keep the analog supply and ground paths compact, and place the closest decoupling capacitor directly between the appropriate supply and ground pins. Treat the SSOP footprint as a fine-pitch layout task: verify pin numbering, paste geometry, solder mask clearance, and courtyard spacing against the package drawing before fabrication.

Separate the digital serial-data, clock, and control traces from sensitive analog input and headphone-output paths to reduce crosstalk into the converted signal. Use a continuous ground reference under the analog section, maintain short return paths for bypass connections, and avoid routing switching-regulator or high-current traces beneath the codec. If the board combines digital processing and analog audio, establish the ground strategy early because later changes can compromise noise performance.

Do not infer suffix equivalence solely from the base family name. WM8731SEDS/V, WM8731SEDS, WM8731SEDS/RV, and WM8731S can differ in reel configuration, lead finish, or ordering treatment even when their core codec specifications match. Confirm the exact ordering table, footprint, pin orientation, temperature range, and packaging information before substitution. Also verify that the host controller supplies the required clock, serial format, and control signals.

The digital interface clock and data lines must meet the timing requirements defined in the manufacturer datasheet. Keep the clock route short, provide a continuous reference plane, and observe the required connection and decoupling details for digital supplies. If long external routes are unavoidable, re-evaluate signal integrity rather than relying on software configuration alone. Analog and digital return currents should not share long paths that mix switching and headphone currents.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The accessible product excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is an audio interface IC rather than an automotive-qualified device designation.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

WM8731SEDS/V datasheet WM8731SEDS/V pinout WM8731SEDS/V datasheet pdf WM8731SEDS/V equivalent WM8731SEDS/V replacement WM8731SEDS/V cross reference WM8731SEDS/V 24 bit codec WM8731SEDS/V 96 kHz WM8731SEDS/V 28-SSOP Cirrus Logic WM8731SEDS/V WM8731SEDS/V headphone driver WM8731SEDS/V portable audio WM8731SEDS/V vs PCM3060PW WM8731SEDS/V price WM8731SEDS/V stock

Komponen dan Istilah Terkait

Cirrus Logic WM8731SEDS/V WM8731SEDS WM8731SEDS/RV WM8731S PCM3060PW audio codec stereo audio codec audio interface IC signal-conversion device semiconductor 24-bit audio 96 kHz sample rate programmable sample rate integrated headphone driver 2.7 V to 3.6 V supply 28-SSOP SSOP family surface-mount package SMD portable Internet audio headset electronics digital audio interface analog-to-digital conversion digital-to-analog conversion
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ