XC2C32A-4VQG44C - 32-Macrocell 1.8V CPLD | AMD Xilinx
MPN: XC2C32A-4VQG44C ✓ AktifXC2C32A-4VQG44C Ringkasan
A CPLD is a programmable logic device that combines multiple macrocell logic sections into one reconfigurable integrated circuit. Unlike a mask-programmed fixed-function logic device, a CPLD can be programmed after manufacture, allowing designers to implement control, decoding, multiplexing, and interface functions in a compact device. The CoolRunner-II family combines a CMOS CPLD architecture with low-power operation and in-system programmability, making it useful for designs that require flexible logic without the resource complexity of a large FPGA.
The XC2C32A provides 32 macrocells, approximately 750 logic gates according to the family comparison information, and 33 user I/Os. Its listed features include in-system programmability, hot-pluggable PLA architecture, and high pinout retention. The device is optimized for 1.8V systems and is described as offering pin-to-pin replacement compatibility with earlier XC2C32 devices when used with the appropriate AMD Xilinx cross-reference information. These characteristics make it useful for legacy and modernization designs where maintaining the existing board footprint is important.
The -4 suffix identifies the performance grade of this device, while VQG44C identifies the package and temperature-related ordering configuration. The package information reported for the target varies between distributor and catalog pages, with 44-pin VQFP notation used for the target and a separate catalog entry describing a 56-pin CSP configuration. Engineers should therefore confirm the mechanical drawing and pin assignment against the exact package suffix before releasing a PCB footprint. The CPLD is not a power semiconductor, so a safe-operating-area chart is not applicable.
Typical applications include bus arbitration, address decoding, control-signal generation, peripheral interfacing, industrial control boards, and compact embedded control systems. The 33 user I/Os can be assigned to digital inputs and outputs, while the programmable macrocells implement Boolean equations, counters, state machines, and registered logic. The 1.8V operating focus helps reduce power consumption in systems where the CPLD interfaces with modern low-voltage processors, transceivers, and memory components.
Design planning should begin with the pin assignment table and the CoolRunner-II device documentation. Confirm that the selected package has the required power, ground, configuration, clock, and user I/O assignments, and use the exact package suffix to select the correct PCB land pattern. Designers should also account for the programmable logic and I/O limitations of the 32-macrocell device rather than assuming FPGA-scale resources. This page consolidates the part identity, package caveats, documented family characteristics, replacement guidance, and practical design considerations into an engineering-focused component reference.
Alternatif penggantian untuk XC2C32A-4VQG44C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC2C32A-4VQG44C (sama faktor bentuk dan footprint) — berbeda di dalam Quiescent Current, Device Type, Process Technology, RoHS Status, Architecture.
XC2C32A-4VQ44C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC2C32A-6VQ44C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC2C32A-6VQG44C
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC2C32A-4VQG44C Rating Maksimal & Karakteristik Listrik
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Macrocell Count | 32 macrocells |
| User I/O Count | 33 pins |
| Logic Gates | Approximately 750 gates |
| Tegangan Pemuat | 1.8 V optimized system |
| Process Technology | 0.18 µm CMOS |
| Propagation Delay | 3.8 ns |
| Internal Frequency | 450 MHz |
| Speed Grade | -4 |
| Programmable Type | In-system programmable |
| Architecture | Hot-pluggable PLA architecture |
| Pinout Retention | Superior pinout retention |
| Routing | 100% product-term routability across function blocks |
| Paket | 44-pin VQFP-style package |
| Package Pin Count | 44 pins |
| Suhu Kerja | Up to 125 °C |
| Logic Family | CMOS |
| Arus Memerintah | 12 µA |
| Lead-Free Status | Lead Free |
| Status RoHS | RoHS Compliant |
XC2C32A-4VQG44C 44 pins Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC2C32A-4VQG44C (44 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC2C32A-4VQG44C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC2C32A-4VQG44C cocok untuk 6 aplikasis: Embedded Processor Glue Logic, Industrial Control and Interlocking, Bus Arbitration and Interface Control, Signal Conditioning and Data Routing, Programmable Startup and Power Sequencing, Compact Instrumentation Control.
Embedded Processor Glue Logic
The XC2C32A-4VQG44C fits embedded boards that need programmable address decoding, chip-select generation, interrupt routing, and status-flag logic beside a processor. Its 32 macrocells provide enough logic for moderate control paths, while 33 user I/Os support interfaces to memories, transceivers, and discrete peripherals. The approximately 3.8 ns propagation-delay grade gives designers more timing margin than the slower alternatives in the same family. The device is also optimized for 1.8V systems, making it appropriate when surrounding logic operates at low voltage. Configure the CPLD as part of the board bring-up sequence so that control outputs remain in a defined state until the processor supplies the configuration data.
Direkomendasikan
Industrial Control and Interlocking
For industrial control boards, the XC2C32A-4VQG44C can implement deterministic interlocks, command decoding, timing sequences, and I/O mapping without loading a larger FPGA. Its 32 macrocells are suited to Boolean control equations, counters, and state machines, and the 33 user I/Os can connect sensors, relay-control logic, status LEDs, and communication transceivers. The -4 timing class is useful when control paths must meet short propagation-delay requirements. Because the device is optimized for 1.8V systems, the board should include appropriate level translation where field-side signals use a different voltage. Validate the final temperature grade, isolation strategy, and safety requirements against the target industrial environment.
Direkomendasikan
Bus Arbitration and Interface Control
The XC2C32A-4VQG44C is appropriate for centralizing bus arbitration, chip-select decoding, bus turnaround, and peripheral-enable logic in a mixed-signal control system. Its 32 macrocells can hold multiple registered state machines and decode functions, while the 33 user I/Os provide connections to processors and peripheral buses. The 1.8V optimization helps simplify integration with modern digital cores. At high bus rates, use the -4 grade only after checking external timing against the board-level budget; a slower family member may be acceptable for low-rate control buses. Keep high-current or high-speed analog paths physically separate from the CPLD pins to reduce coupling into the programmable logic.
Direkomendasikan
Signal Conditioning and Data Routing
The XC2C32A-4VQG44C can condition digital signals, mux inputs, implement protocol-specific framing, and route control data between sensors, converters, and host logic. Its programmable PLA architecture allows logic functions to be changed during product revisions, while the quoted 12 µA quiescent current supports compact designs. The 33 user I/Os are useful for parallel sensor hubs and low-to-moderate-speed digital interfaces. For high-frequency paths, calculate setup and hold margins against the approximately 3.8 ns propagation-delay grade and add source termination where signal integrity requires it. The device should not replace a dedicated high-speed transceiver when the interface requires continuous analog performance beyond its CMOS I/O capability.
Direkomendasikan
Programmable Startup and Power Sequencing
The XC2C32A-4VQG44C can provide programmable power-up sequencing, reset coordination, and enable-generation logic for a compact control platform. In-system programmability allows the startup behavior to be updated without a package change, while the 32 macrocells provide dedicated logic for sequencing several rails and peripherals. The approximately 3.8 ns propagation-delay class helps keep control events tightly defined compared with the -6 alternatives. Use the programmable configuration and pin-assignment resources to prevent conflicting enables during startup. Confirm that every controlled rail has a defined safe state even when the CPLD is unconfigured or the configuration source is unavailable.
Direkomendasikan
Compact Instrumentation Control
For compact instrumentation, the XC2C32A-4VQG44C can implement mode selection, measurement sequencing, trigger routing, and front-panel control while leaving the main processor responsible for higher-level computation. Its 33 user I/Os are useful for control switches, status indicators, trigger signals, and low-speed data interfaces. The 1.8V focus supports low-voltage system partitioning, and the 12 µA quoted quiescent current is useful when power management matters. Use the exact package drawing to establish the footprint and reserve configuration access for production programming. For laboratory or field equipment, verify EMC, isolation, temperature, and grounding requirements separately from the CPLD logic timing.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC2C32A-4VQG44C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC2C32A-4VQ44C | XC2C32A-6VQ44C | XC2C32A-6VQG44C |
|---|---|---|---|---|
| Package | 44-pin VQFP-style package | 44-pin VQFP-style package | 44-pin VQFP-style package | 44-pin VQFP-style package |
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Device Type | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD |
| Macrocell Count | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells |
| User I/O Count | 33 pins | 33 pins | 33 pins | 33 pins |
| Speed Grade | -4 | -4 | -6 | -6 |
| Supply Voltage | 1.8 V optimized system | 1.8 V optimized system | 1.8 V optimized system | 1.8 V optimized system |
| Programmable Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Diferensiator Kunci
- Faster -4 performance grade (vsXC2C32A-6VQ44C)
- Direct family replacement path (vsXC2C32A-4VQ44C)
- Low-power 1.8V-oriented implementation (vsXC2C32A-6VQG44C)
Catatan Desain
Use the exact package suffix and the AMD mechanical drawing to create the PCB footprint. The available product information describes the target as 44-pin VQFP-style, while another catalog page associates a searchable related configuration with a 56-pin CSP. Do not copy a footprint from a generic 44-pin symbol without checking body size, lead span, pitch, pin numbering, and exposed-pad or thermal requirements.
Decouple each supply rail locally and follow the recommended capacitor placement in the AMD XC2C32A documentation. Because the device is optimized for 1.8V systems, confirm the exact core and I/O voltage limits, input thresholds, output levels, and configuration power-up behavior in the datasheet before connecting external logic. Do not assume that a 1.8V-oriented device can directly accept 3.3V or 5V signals.
Reserve short, direct routing for configuration pins and clocks, and keep the CPLD away from noisy switching nodes and long high-current paths. Although the device provides approximately 3.8 ns propagation delay in the -4 grade, external routing and interconnect delay can dominate a critical path. Use the timing analyzer with actual board constraints and add series damping or controlled topology when a connected peripheral creates overshoot or ringing.
The most common migration error is treating every XC2C32A ordering code as interchangeable. The -4 and -6 speed grades have different timing performance, and package suffixes can indicate different lead arrangements or temperature configurations. Validate the part-number cross-reference, pin table, footprint, speed grade, and system timing constraints as a complete set before substituting an alternative in production.
Informasi Konformitas
The available part information states RoHS Compliant and Lead Free. No specific AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals statement was identified.
