XC4VFX40-11FF1152I - 41904-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX40-11FF1152I ✗ Akhir HidupXC4VFX40-11FF1152I Ringkasan
A field-programmable gate array is a semiconductor whose digital logic, interconnects, and I/O behavior are configured after fabrication. The FPGA category sits below programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable interconnect, and user I/O in one device. Virtex-4 FX devices combine this general-purpose fabric with embedded processors and high-speed serial transceivers, allowing complex control, datapath, connectivity, and network functions to be integrated in a single package.
The XC4VFX40-11FF1152I provides 4,656 configurable logic blocks, 41,904 logic cells, and 448 I/O according to the device listing. Its 90 nm CMOS process supports a 1.2 V core operating supply. A 1028 MHz internal frequency is listed for the -11 grade, while the Virtex-4 family supports -10, -11, and -12 performance grades. The 1152-terminal FCBGA exposes substantially more device interconnect than a typical low-pin-count FPGA package.
This device belongs to the Virtex-4 FX platform, which integrates programmable logic with a hard processor subsystem and dedicated serial transceiver resources. That architecture allows designers to implement multi-gigabit interfaces, packet-processing engines, embedded control functions, and parallel datapaths without combining several separate devices. Because FPGA configuration determines routing and logic, timing closure depends on placement, clocking constraints, I/O standards, and the selected implementation toolchain.
Typical uses include telecommunications line cards, network switches, packet-processing systems, industrial control platforms, high-speed test equipment, and embedded signal-processing appliances. The 448 I/O and 4,656 configurable logic blocks are particularly useful where parallel interfaces coexist with high-speed serial links. Designers should also account for the memory, transceiver, and I/O capabilities required by the selected Virtex-4 FX device rather than evaluating logic cells alone.
Power and signal-integrity planning are critical for a 1152-terminal FCBGA implementation. Follow the AMD/Xilinx PCB design guidance for power-plane distribution, decoupling, ball escapes, and high-speed layer transitions. Confirm that every power rail, decoupling capacitor, configuration interface, and I/O standard in the schematic matches the device pinout and board constraints before fabrication.
This product record combines device specifications, temperature-grade and speed-grade distinctions, verified drop-in candidates, and practical selection guidance. It also highlights where a direct PCB substitution can retain the package while changing performance grade, industrial temperature coverage, or configuration-device suffix, allowing procurement and engineering teams to assess each transition explicitly.
Alternatif penggantian untuk XC4VFX40-11FF1152I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
XC4VFX40-11FF1152C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VFX40-10FFG1152I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VFX40-11FFG1152I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VFX40-12FF1152C
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VFX40-12FF1152CS1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VFX40-11FF1152I Rating Maksimal & Karakteristik Listrik
| Device Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 41,904 logic cells |
| Configurable Logic Blocks | 4,656 CLBs |
| Maximum Internal Frequency | 1028 MHz |
| Speed Grade | -11 |
| User I/O | 448 I/O |
| Paket | 1152-terminal FCBGA |
| Package Type | FBGA-1152 |
| Package Side Length | 35 mm |
| Terminal Pitch | 1.00 mm |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Suhu Kerja | 0°C to 85°C |
| Logic Family | CMOS |
XC4VFX40-11FF1152I 35 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC4VFX40-11FF1152I (35 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC4VFX40-11FF1152I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC4VFX40-11FF1152I cocok untuk 6 aplikasis: Telecommunications Line Cards, Network Packet Processing, Industrial Control Systems, High-Speed Test and Measurement, Embedded Signal Processing, High-Performance Embedded Systems.
Telecommunications Line Cards
The XC4VFX40-11FF1152I fits telecommunications line cards that require parallel packet processing, multiple interface domains, and a substantial programmable fabric. Its 4,656 configurable logic blocks and 448 I/O can host framing logic, queues, control processors, and interface bridges, while the Virtex-4 FX architecture supports integrated high-speed serial connectivity. A -11 device at a listed 1028 MHz internal frequency provides timing margin below the -12 grade, and the 0°C-to-85°C range suits industrial line-card environments. Before schematic capture, verify the required transceiver count, clock topology, memory interface, and pin assignments against the device tables.
Direkomendasikan
Network Packet Processing
The XC4VFX40-11FF1152I is suitable for parallel packet classification, buffering, and switching fabrics because its 41,904 logic cells provide considerable programmable capacity and its 448 I/O support multiple interfaces. Designers can place header parsing, lookup engines, traffic shaping, and control logic in the same FPGA rather than combining separate processors and programmable devices. The -11 speed grade offers more timing margin than -10 while remaining below the -12 option. The implementation should use AMD/Xilinx timing constraints and resource-estimation results to verify that logic, block RAM, DSP, and serial-transceiver resources meet the system architecture.
Direkomendasikan
Industrial Control Systems
The XC4VFX40-11FF1152I can consolidate deterministic machine control, sensor conditioning interfaces, communications, and safety-adjacent supervisory logic in one Virtex-4 FX device. Its 448 I/O and 4,656 configurable logic blocks allow control domains to coexist without discrete glue logic, while the 0°C-to-85°C industrial range covers factory equipment operating above the commercial-temperature limit. The 1152-terminal FCBGA requires careful via-in-pad and decoupling implementation to control power integrity and signal return paths. Designers should separate noisy inputs, keep clocks short, and validate every external interface against the package pinout.
Direkomendasikan
High-Speed Test and Measurement
The XC4VFX40-11FF1152I is appropriate for FPGA-based instrumentation that combines wide parallel capture, real-time processing, and high-speed serial I/O. Its 41,904 logic cells can support parallel-to-serial conversion, data formatting, pattern generation, and analysis pipelines, while 448 I/O provide parallel test ports. The -11 grade's listed 1028 MHz internal frequency supports timing-driven designs that do not require the -12 grade. High-speed analog input and output interfaces still require separate conversion devices and careful clocking. Use the AMD implementation tools to evaluate achievable clock rates after placement rather than treating the headline frequency as a guaranteed system bandwidth.
Direkomendasikan
Embedded Signal Processing
The XC4VFX40-11FF1152I supports embedded signal-processing systems where fixed or floating-point algorithms must run alongside control logic and external interfaces. The Virtex-4 FX fabric provides 4,656 configurable logic blocks, and its integrated DSP resources can accelerate multiplication-heavy filtering or transforms when the required count is sufficient. Its processor subsystem can supervise configuration and handle control tasks that are easier to express in software. Resource utilization, DSP rounding, memory bandwidth, and latency must be profiled with the target implementation. The -11 speed grade provides additional timing margin over -10, while the -12 option remains preferable for the most demanding synchronous pipelines.
Direkomendasikan
High-Performance Embedded Systems
The XC4VFX40-11FF1152I can act as the central programmable element in an embedded platform containing processor tasks, custom accelerators, dedicated I/O, and serial links. Its 448 user I/O permit multiple bus widths and fixed-function interfaces, while the 4,656 configurable logic blocks support custom hardware that software alone would implement inefficiently. The industrial 0°C-to-85°C range is useful in equipment that is not room-temperature controlled. A successful design must include a valid configuration source, complete power-up sequencing, defined clocking, and board-level validation for all 1152 balls. Configuration pins and mode settings must not be changed merely because a candidate uses the same package.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC4VFX40-11FF1152I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC4VFX40-11FF1152C | XC4VFX40-10FFG1152I | XC4VFX40-11FFG1152I | XC4VFX40-12FF1152C | XC4VFX40-12FF1152CS1 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-1152 | FCBGA-1152 | FCBGA-1152 | FCBGA-1152 | FCBGA-1152 | FCBGA-1152 |
| Logic Cells | 41,904 logic cells | 41,904 logic cells | 41,904 logic cells | 41,904 logic cells | 41,904 logic cells | 41,904 logic cells |
| Configurable Logic Blocks | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs | 4,656 CLBs |
| Speed Grade | -11 | -11 | -10 | -11 | -12 | -12 |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Diferensiator Kunci
- Provides an intermediate -11 performance grade (vsXC4VFX40-10FFG1152I)
- Retains a 1152-terminal footprint while offering a higher -12 option (vsXC4VFX40-12FF1152C)
- Matches the -11 speed grade for timing-focused designs (vsXC4VFX40-12FF1152C)
- Industrial ordering option for temperature-controlled equipment (vsXC4VFX40-11FF1152C)
Catatan Desain
Implement every power rail listed for the XC4VFX40-11FF1152I, including the 1.2 V core and the required auxiliary, I/O, and configuration supplies. Place bulk and high-frequency decoupling directly across the relevant supply balls rather than grouping capacitors by rail at the board edge. Sequence the rails in the order specified by the device documentation. Because a 1152-ball FCBGA has many current transitions, verify plane geometry, via current capacity, and return-path continuity under worst-case processor and transceiver activity.
The package is a 35 mm square FCBGA with 1.00 mm terminal pitch. Follow the AMD/Xilinx package design rules for ball-to-trace transitions, including escape strategy, via construction, pad stack, and soldering-profile requirements. Avoid long stubs beneath high-speed nets and preserve uninterrupted reference planes where return paths change layers. Review the assembly drawing for package orientation, component keepouts, and exposed features before placing the component and its supporting passives.
Separate clocks, high-speed serial links, and sensitive inputs from noisy digital routing where possible. Use the board-design recommendations for 90 nm Virtex-4 FX devices to define trace geometry, via transitions, terminations, and reference-clock routing. Apply I/O drive strength, slew, pull-up, pull-down, and IOSTANDARD attributes that match the external interface. Validate each interface with post-layout timing and signal-integrity analysis rather than relying only on the listed internal frequency.
Do not treat XC4VFX40-11FF1152C, -10FFG1152I, or -12FF1152C as unconditional replacements. The suffixes can change commercial versus industrial temperature coverage, speed grade, configuration details, or ordering conditions. Compare the device tables, configuration pins, electrical limits, and qualification requirements. For a timing-critical or temperature-critical system, rerun implementation with the candidate suffix and verify the production configuration file is not tied to the original ordering code.
Informasi Konformitas
The device is an older Virtex-4 FX industrial FPGA; no specific RoHS, REACH, halogen-free, or conflict-minerals declaration appears in the cited records. AEC-Q100 is not applicable because this is not an automotive-qualified ordering code.