XC4VLX40-10FFG668C - 4608-LC Virtex-4 LX FPGA | AMD
MPN: XC4VLX40-10FFG668C ✓ AktifXC4VLX40-10FFG668C Ringkasan
An FPGA is a programmable semiconductor whose logic, interconnect, and I/O resources are configured after manufacture. The FPGA category sits below programmable logic and above fixed-function integrated circuits: unlike an ASIC, an FPGA permits field upgrades, shorter development cycles, and hardware customization without changing the printed circuit board. The Virtex-4 LX family targets general-purpose logic, high-speed connectivity, DSP, embedded processing, and control systems.
The XC4VLX40-10FFG668C combines 4,608 logic cells with 448 logic blocks and 448 I/Os. Its -10 designation identifies the device speed grade, while the 668 suffix denotes the 668-BBGA package configuration. The device is specified for commercial-temperature operation from 0°C to 85°C and uses CMOS logic, making it suitable for controlled industrial, communications, test, measurement, and embedded-control environments.
The main engineering value of this device is the combination of programmable logic density, extensive I/O capacity, and a large BGA package in a single Virtex-4 LX implementation. A 448-I/O device can support parallel data interfaces, memory interfaces, control signals, clocks, and high-speed serial I/O resources when the design and selected I/O standards permit them. The 4,608-cell fabric supports concurrent control logic, data-path processing, protocol handling, and application-specific state machines.
Typical uses include industrial automation controllers, network interface equipment, data-acquisition systems, test and measurement platforms, embedded video processing, and high-speed communications equipment. In each case, designers benefit from parallel development of firmware-like HDL logic and reusable interface blocks. The 448 available I/Os are particularly useful where a design requires numerous physical connections rather than only a small number of high-speed serial links.
PCB implementation requires careful attention to the 668-BBGA footprint, power sequencing, decoupling, via-in-pad strategy, and escape routing. A dense BGA also complicates inspection and rework, so assembly process controls and board-level test planning should be established before layout release. Configuration storage, startup behavior, clock distribution, and I/O voltage compatibility must be verified against the selected board platform.
This page organizes the available device specifications, package details, directly related family alternatives, application guidance, and PCB considerations into a practical engineering reference. It also distinguishes genuine same-footprint family alternatives from options that would require a different package, voltage standard, speed grade, or device architecture.
Alternatif penggantian untuk XC4VLX40-10FFG668C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC4VLX40-10FFG668C (sama faktor bentuk dan footprint) — berbeda di dalam Speed Grade, Logic Cells, Package, Package Type, User I/O.
XC4VLX40-10FF668C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC4VLX40-11FF668C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC4VLX40-10FFG668I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XQ4VLX40-10FF668I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XQ4VLX40-10FFG668I
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
XC4VLX40-10FFG668C Rating Maksimal & Karakteristik Listrik
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 4608 cells |
| Logic Blocks | 448 blocks |
| User I/O | 448 I/Os |
| Logic Family | CMOS |
| Internal Frequency | 1028 MHz |
| Speed Grade | -10 |
| Package Designation | 668-BBGA |
| Package Type | FCBGA |
| Package Pin Count | 1148 pins |
| Suhu Kerja | 0°C to 85°C |
| Lead-Free Status | Pb-Free |
XC4VLX40-10FFG668C 1148 pins Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC4VLX40-10FFG668C (1148 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC4VLX40-10FFG668C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC4VLX40-10FFG668C cocok untuk 6 aplikasis: Industrial Automation Controller, Data-Acquisition System, Network Interface Equipment, Test and Measurement Platform, High-Speed Communications Module, Embedded Video Processing.
Industrial Automation Controller
The AMD XC4VLX40-10FFG668C fits centralized automation controllers that combine machine sequencing, sensor conditioning interfaces, communications, and safety-adjacent supervisory logic. Its 4,608 logic cells provide capacity for parallel state machines, timing blocks, protocol handling, and data-path functions, while 448 I/Os offer extensive connectivity to sensors, actuators, operator panels, and field buses. The device can be placed between an industrial processor and external interface electronics to execute deterministic control functions without continuous processor intervention. A -10 Virtex-4 LX implementation provides a stable migration path for established HDL designs, although the commercial 0°C to 85°C range requires enclosure temperature control in industrial installations.
Direkomendasikan
Data-Acquisition System
The XC4VLX40-10FFG668C is suitable for parallel data-acquisition systems requiring numerous sensor inputs, sampling control, digital filtering, and data formatting. The 448-I/O capacity can support parallel ADC data buses, counters, trigger signals, memory interfaces, status flags, and multi-clock domains, while the 4,608-cell fabric can implement sampling pipelines and buffering control. Placing the FPGA between converters and a processor or memory subsystem allows deterministic timing and channel synchronization to be handled in programmable logic. The -10 speed grade and 1,028 MHz associated internal frequency provide a defined Virtex-4 LX performance class, but the final timing closure must use the manufacturer speed-grade tables and the actual board constraints.
Direkomendasikan
Network Interface Equipment
The AMD XC4VLX40-10FFG668C can implement programmable packet processing, line-card control, test patterns, and interface adaptation in network equipment. Its 4,608 logic cells support concurrent transmit, receive, header-processing, and traffic-management logic, while 448 I/Os are valuable for parallel backplanes, status buses, and chip-to-chip links. Engineers can partition the fabric between protocol termination, statistics counters, and control-plane handshakes, reducing dependence on hard processor resources. The large 668-BBGA FCBGA also offers high interconnect density for sophisticated routing. Clocking, I/O voltage standards, and signal-integrity performance must be selected and verified against the board-level interface requirements.
Direkomendasikan
Test and Measurement Platform
The XC4VLX40-10FFG668C is appropriate for modular test and measurement equipment where sequencing, acquisition, pattern generation, and instrument control must operate concurrently. The 4,608-cell fabric can host timing generators, digital stimulus engines, trigger managers, and protocol converters, while 448 I/Os provide extensive connections to DUTs, fixtures, and backplanes. Programmable logic enables measurement sequences to be updated without changing the PCB, making the device useful for configurable automated test equipment. For laboratory or production-floor use, the 0°C to 85°C specification should be checked against worst-case enclosure temperature and airflow. Final implementation should preserve the manufacturer's recommended power and decoupling arrangement.
Direkomendasikan
High-Speed Communications Module
The AMD XC4VLX40-10FFG668C can support communication modules that combine parallel data handling, clock recovery logic, packet framing, and supervisory functions. Its 448 I/Os allow high-density connectivity to transceivers, memory devices, backplanes, and synchronization interfaces, while the 4,608 logic cells provide parallel lanes and protocol engines. This architecture is useful where a fixed protocol or feature set is evolving and field reconfiguration provides an advantage. The -10 grade should be checked against the required clock and I/O timing margins, especially for source-synchronous interfaces. High-speed routing also requires controlled impedance, return paths, and compliance with the selected I/O standard.
Direkomendasikan
Embedded Video Processing
The XC4VLX40-10FFG668C can implement embedded pixel pipelines, image pre-processing, frame timing, and interface conversion in programmable video systems. The 4,608 logic cells are suitable for parallel color conversion, thresholding, synchronization, and control logic, while 448 I/Os allow direct connection to parallel sensors, display timing circuits, and memory interfaces. Using the FPGA as a hardware pipeline can reduce processor load and provide deterministic frame timing. The exact resource requirements depend on bit depth, resolution, frame rate, and memory architecture, which must be estimated before committing to the device. Power, thermal performance, and BGA assembly yield should also be considered in compact embedded systems.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC4VLX40-10FFG668C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC4VLX40-10FF668C | XC4VLX40-11FF668C | XC4VLX40-10FFG668I | XQ4VLX40-10FF668I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA | 668-BBGA FCBGA |
| Speed Grade | -10 | -10 | -11 | -10 | -10 |
Diferensiator Kunci
- Direct functional-equivalent path without changing the logic-cell target (vsXC4VLX40-10FF668C)
- Higher speed grade is available on the same board footprint (vsXC4VLX40-11FF668C)
- Documented lead-free package option for the target assembly (vsXC4VLX40-10FF668C)
Catatan Desain
Treat the 668-BBGA as a high-density escape-routing problem. Use the manufacturer's package drawing and land pattern, preserve the documented ball assignments, and provide clean reference-plane return paths beneath high-speed signals. Via-in-pad or filled microvias may be necessary where component escape density exceeds the available routing area. Confirm whether the assembly process supports these features before releasing artwork, and plan X-ray inspection for hidden solder-joint defects.
Follow the manufacturer's power-plane, decoupling, and power-sequencing requirements for every voltage rail used by the Virtex-4 device. Place high-frequency bypass capacitors close to the relevant supply and ground balls, while also observing the maximum permitted via and trace lengths for each rail. The commercial 0°C to 85°C specification does not determine permissible electrical derating; use the datasheet's DC characteristics and absolute-maximum ratings during power budgeting.
Plan the configuration, clock, and JTAG connections before general signal routing because these functions affect bring-up and debugging. Keep sensitive configuration or test paths away from high-speed interfaces where practical, provide accessible test points, and observe the manufacturer's guidance for clock input distribution. A stable configuration design is particularly important in production systems because an incorrect bitstream or clock sequence can prevent normal device startup.
Do not substitute a different Virtex-4 suffix solely because the logic-cell count appears similar. Speed grade, temperature code, package terminal finish, configuration method, and voltage requirements can affect production suitability even when the BGA outline is unchanged. For the XC4VLX40-10FF668C and XC4VLX40-11FF668C options, compare the complete manufacturer ordering information and timing tables. Likewise, do not populate the 668-BBGA footprint with a device having a different ball count.
Informasi Konformitas
The exact-MPN distributor listing identifies the XC4VLX40-10FFG668C as Pb-Free. No separate RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 declaration was established for this exact device.