XC7A15T-L1FTG256I - Artix-7 FPGA, 170 I/O, 256-LBGA | AMD
MPN: XC7A15T-L1FTG256I ✓ AktifXC7A15T-L1FTG256I Ringkasan
A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor. Unlike a conventional microcontroller that executes software instructions, an FPGA implements digital circuits through configurable logic and interconnect resources. Within the product hierarchy, the XC7A15T-L1FTG256I is an FPGA and programmable logic device within AMD's 7 Series and Artix-7 families. The Artix-7 family targets designs that need substantial logic capacity, flexible I/O, and low-power operation without the resources of a larger FPGA family.
The most visible configuration figure for this device is its 170 I/O. These I/O resources can be assigned in the design tool to functions such as single-ended or differential digital interfaces, control signals, memory connections, and communications links. The 256-LBGA package also supports compact board layouts, although its fine-pitch ball array requires careful PCB design, inspection, and assembly planning.
The XC7A15T-L1FTG256I designation identifies a specific speed, temperature, package, and industrial-grade ordering configuration. The L1 portion indicates a lower-power-oriented performance option within the ordering scheme, while FTG256I identifies the 256-ball FTBGA package and industrial temperature option. Exact core voltage limits, power characteristics, memory quantities, supported interfaces, and temperature limits should be confirmed in the AMD Artix-7 data sheet and the package pinout files before schematic release.
Typical applications include industrial control modules, programmable sensor and data-acquisition systems, communications equipment, embedded video processing, robotics, test equipment, and general-purpose interface hubs. The 170 available I/O are especially useful when a design must connect external memories, converters, transceivers, sensors, and control peripherals while retaining flexible pin assignment.
A critical implementation consideration is the 256-LBGA footprint. Use the AMD package pinout files to assign every power, ground, configuration, clock, and user I/O ball, then validate the escape routing and layer stack with the board fabricator. Do not infer package-ball functions from the generic 7 Series family naming alone.
This product record combines the exact XC7A15T-L1FTG256I ordering information, available Artix-7 package resources, pin-compatible same-family alternatives, and practical implementation guidance. The design decisions should be finalized against the AMD data sheet, UG475 package guidance, and the complete pinout file for the selected device.
Alternatif penggantian untuk XC7A15T-L1FTG256I — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7A15T-L1FTG256I (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, Temperature Grade, Speed Grade, User I/O.
XC7A15T-1FTG256I
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7A15T-1FTG256C
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7A15T-1FTG256E
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7A15T-2FTG256I
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7A15T-3FTG256E
✅ Drop-InKontak untuk harga
Lihat Datasheet →XC7A15T-L1FTG256I Rating Maksimal & Karakteristik Listrik
| Device Type | Artix-7 FPGA |
| User I/O Count | 170 I/O |
| Paket | 256-LBGA |
| Logic Resource Value | 16640 |
| Additional Device Data | 921600 |
| FPGA Family | Artix-7 |
| Product Series | 7 Series |
| Manufacturer | AMD / Xilinx |
| Device Configuration | FPGA |
| Temperature Grade | Industrial |
| Performance Designation | L1 |
XC7A15T-L1FTG256I 256-lbga Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7A15T-L1FTG256I (256-lbga pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7A15T-L1FTG256I.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7A15T-L1FTG256I cocok untuk 6 aplikasis: Industrial Control and Automation, Data Acquisition and Signal Conditioning, Communications and Protocol Bridging, Embedded Video and Display Processing, Test and Measurement Equipment, Robotics and Embedded Systems.
Industrial Control and Automation
The XC7A15T-L1FTG256I fits compact industrial controllers that coordinate sensors, actuators, interlocks, and machine-control logic. Its 170 user I/O provides substantial board-level connectivity for digital inputs, outputs, encoder or counter interfaces, and communications links. The FPGA architecture allows control functions to be implemented as deterministic parallel hardware rather than relying solely on sequential software. The 256-LBGA package reduces board area, but its fine-pitch footprint requires the exact AMD pinout file, a suitable PCB stack-up, and assembly-process support. Before release, verify industrial temperature limits, power sequencing, I/O voltage compatibility, and EMC requirements in the AMD Artix-7 documentation.
Direkomendasikan
Data Acquisition and Signal Conditioning
The XC7A15T-L1FTG256I is suitable for data-acquisition front ends that must sample multiple channels, perform parallel filtering, and transfer results to a processor. Its 170 I/O can support digital sensor buses, ADC and DAC control signals, capture triggers, status indicators, and high-speed data routing. Parallel programmable logic can implement filtering, decimation, thresholding, or calibration pipelines with predictable timing. The device's 256-LBGA package helps minimize board footprint, while board-level signal integrity still depends on controlled-impedance routing, return paths, and careful power-plane partitioning. Engineers should establish the required I/O standards, external-memory interface, clocking architecture, and timing budget from the AMD data sheet before assigning pins.
Direkomendasikan
Communications and Protocol Bridging
The XC7A15T-L1FTG256I can serve as a protocol-conversion or communications-hub device when a system combines several serial interfaces with deterministic packet handling. Its 170 I/O allow parallel connectivity to multiple transceivers, processors, memories, and status signals, while programmable logic can handle framing, clock-domain crossing, filtering, or packet prioritization. The L1 ordering option should be checked against the power and timing targets of the final system because an FPGA's resource usage can materially affect both performance and thermal behavior. A 256-LBGA assembly also demands assembly inspection, adequate solder-joint inspection, and a board layout that accommodates power and ground-ball connectivity under the manufacturer's package guidance.
Direkomendasikan
Embedded Video and Display Processing
The XC7A15T-L1FTG256I is applicable to embedded image-processing systems that perform pixel routing, color conversion, region detection, timing generation, or display timing control. Its programmable logic resources can execute several video functions in parallel, while 170 I/O provide interfaces for sensors, memory, serializers, and display timing signals. The compact 256-LBGA package helps limit board area in camera modules and industrial display controllers. Practical implementation depends on selecting supported I/O standards, using an appropriate memory interface, and meeting external timing constraints with the chosen clocking resources. Video designs should also include deliberate handling of pixel-clock jitter, data synchronization, power sequencing, and connector or panel signal integrity.
Direkomendasikan
Test and Measurement Equipment
The XC7A15T-L1FTG256I supports programmable test and measurement systems requiring simultaneous acquisition, pattern generation, timing control, and analysis. Its 170 I/O can connect pattern drivers, comparators, counters, memory devices, and trigger systems. FPGA parallelism allows measurements to run concurrently and can implement pipelined algorithms without a processor bottleneck. The 256-LBGA footprint supports compact instrumentation but increases routing complexity, so a multilayer PCB with appropriate return paths and power distribution is typically important. Before schematic completion, verify supported I/O voltage levels, external memory compatibility, clock-jitter requirements, and calibration strategy. Confirm the L1 performance option against the required sample rate and timing margin in the final system configuration.
Direkomendasikan
Robotics and Embedded Systems
The XC7A15T-L1FTG256I is well matched to robot controllers, autonomous-equipment modules, and embedded systems that combine sensor fusion, motion sequencing, and communication. Hardware implementations can coordinate encoders, motor-control commands, safety interlocks, and network traffic with deterministic response times. With 170 I/O, the device can connect multiple sensors and actuators while retaining configurable logic for real-time filtering or trajectory calculations. The 256-LBGA package helps reduce the size of space-constrained robotic modules, but designers must plan for thermal performance, connector alignment, and robust assembly. Use the AMD package pinout files to separate sensitive clock or high-speed signals, and validate timing, grounding, and electromagnetic behavior across the complete robotic platform.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7A15T-L1FTG256I — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7A15T-1FTG256I | XC7A15T-1FTG256C | XC7A15T-1FTG256E | XC7A15T-2FTG256I | XC7A15T-3FTG256E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA | 256-LBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| User I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O |
| Logic Resource Value | 16640 | 16640 | 16640 | 16640 | 16640 | 16640 |
| Additional Device Data | 921600 | 921600 | 921600 | 921600 | 921600 | 921600 |
| Speed Designation | L1 | 1 | 1 | 1 | 2 | 3 |
| Temperature Suffix | I | I | C | E | I | E |
Diferensiator Kunci
- Maintains the same 170-I/O Artix-7 interface while offering an L1 performance designation (vsXC7A15T-1FTG256I)
- Industrial ordering option retained in a same-package migration path (vsXC7A15T-1FTG256C)
- Package-compatible path to higher-speed 2-grade Artix-7 device (vsXC7A15T-2FTG256I)
- Same-family alternatives support different speed and temperature trade-offs (vsXC7A15T-3FTG256E)
Catatan Desain
Use the AMD Artix-7 FTG256 package-device pinout file as the controlling source for all 256 ball assignments. Separate power, ground, configuration, clock, and user-I/O groups according to the package guidance, and verify every escape route against the final stack-up. A 256-LBGA footprint offers little room for routing mistakes, so perform board-level design-rule checks and review escape routing with the PCB manufacturer before fabrication.
Plan the complete power tree from the AMD data sheet, including the required core and I/O supplies, permitted voltage combinations, sequencing constraints, and decoupling topology. Place the required bypass capacitors close to their associated package balls and provide low-impedance planes or pours for current distribution. Validate voltage tolerances, startup behavior, and worst-case rail current under the final design rather than relying on generic 7 Series guidance.
Route clocks and high-speed interfaces as controlled-impedance nets with continuous reference planes and short return paths. Avoid routing sensitive signals across split power or ground planes, and add suitable termination at the source or receiver when required by the selected I/O standard. Use the package pinout to identify dedicated clock and configuration balls, and confirm escape-route length matching before finalizing component placement.
Estimate power from the actual implemented design rather than a generic device maximum. Account for FPGA core activity, I/O loading, the selected L1 performance option, and the PCB thermal design. Use the device-specific thermal data to determine whether copper planes, spreaders, forced airflow, or thermal derating are needed. Re-evaluate the estimate after place-and-route because utilization and routing congestion can materially change dynamic power and junction temperature.
Informasi Konformitas
No explicit compliance declaration for the exact XC7A15T-L1FTG256I ordering code appears in the indexed product information. Confirm material and environmental declarations with AMD using the exact MPN.