XC7K160T-1FBG676C - Kintex-7 162K FPGA | AMD Xilinx
MPN: XC7K160T-1FBG676C ✓ AktifXC7K160T-1FBG676C Ringkasan
A Kintex-7 FPGA belongs to the FPGA and CPLD category of programmable semiconductor devices. Unlike a fixed-function processor or application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, block RAM, DSP resources, and programmable input/output blocks. This hierarchy places the Kintex-7 device above individual logic cells and below larger system-level designs, allowing engineers to implement parallel datapaths, protocol interfaces, control logic, and signal-processing functions in one device.
The XC7K160T family provides 162,240 logic cells and is manufactured on a 28 nm CMOS process. The -1 suffix identifies the device performance grade, while the FBG676 designation identifies the 676-ball package and associated commercial ordering configuration. The listed package dimensions and exact ball assignments remain controlled by the AMD Kintex-7 documentation. Compared with smaller 7 series devices, the 160T model provides substantially more logic and fixed resources for designs requiring multiple high-speed interfaces or parallel processing.
The Kintex-7 architecture supports programmable I/O, embedded memory, digital signal processing, and dedicated clocking resources. These resources make the XC7K160T-1FBG676C suitable for video processing, industrial automation, communications infrastructure, instrumentation, and high-speed control systems. Compared with a discrete processor-and-ASIC implementation, an FPGA can consolidate parallel logic into a single programmable component and shorten the time required to modify protocols or algorithms after hardware fabrication.
Typical deployments include industrial Ethernet and serial-interface bridges, high-speed data acquisition, radar and signal-processing front ends, test and measurement platforms, and embedded control systems. The device is particularly useful when several channels must be processed concurrently, latency must remain predictable, or field updates are required. Board-level implementation still depends on the selected I/O standards, memory interfaces, clocking topology, power budget, thermal conditions, and pin assignment.
Design the PCB around the exact FBG676 land pattern and follow the AMD power, decoupling, clocking, configuration, and thermal guidance. Provide clean regulated supplies, place decoupling capacitors close to their associated power balls, maintain the required configuration interface, and route high-speed signals with controlled impedance. Because the package exposes hundreds of balls, assembly and inspection require adequate BGA assembly capability and a land pattern derived from the package documentation rather than inferred from a generic BGA library.
This product page combines the verified XC7K160T-1FBG676C identity, package information, technology details, comparison references, sourcing context, and practical implementation guidance. It also distinguishes true drop-in FPGA options from changes that require new pin assignments, different power plans, different configuration behavior, or a different PCB footprint.
Alternatif penggantian untuk XC7K160T-1FBG676C — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XC7K160T-1FBG676C (sama faktor bentuk dan footprint) — berbeda di dalam Device Type, Package, Logic Cells, Process Technology, Speed Grade.
XC7K160T-2FBG676C
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC7K160T-2FBG676I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
XC7K160T-1FBG676I
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →XC7K160T-1FBG676E
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7K160T-2FBG676E
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
XC7K160T-1FBG676C Rating Maksimal & Karakteristik Listrik
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Kintex-7 |
| Logic Cells | 162,240 cells |
| Process Technology | 28 nm CMOS |
| Speed Grade | -1 |
| Core Voltage | 1 V |
| Maximum Operating Temperature | +85 °C |
| Paket | 676-ball FCBGA |
| Package Pin or Ball Count | 676 balls |
| Device Weight | 2 oz |
| Programming Technology | SRAM configuration |
| Tipe Mounting | Surface Mount |
XC7K160T-1FBG676C 676 balls Diamant Konfigurasi Panduan
Konfigurasi pin untuk XC7K160T-1FBG676C (676 balls pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XC7K160T-1FBG676C.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XC7K160T-1FBG676C cocok untuk 6 aplikasis: Industrial Automation and Control, High-Speed Communications Equipment, Signal Processing and Data Acquisition, Test and Measurement Instrumentation, Video and Image Processing, Aerospace and Defense Prototyping.
Industrial Automation and Control
The XC7K160T-1FBG676C fits industrial controllers that coordinate sensors, motion systems, interlocks, and real-time I/O. Its 162,240 logic cells allow parallel control logic and protocol handling to share one FPGA, reducing component count compared with a multi-chip implementation. The 1 V core supply and 28 nm process support compact, power-conscious equipment designs, while the -1 grade provides a defined performance class for deterministic control paths. Engineers should map every powered I/O standard, isolate external interfaces appropriately, and budget the core, auxiliary, and I/O supplies separately. Configuration storage, clock distribution, and recovery behavior must also be designed into the controller so a power cycle or configuration update does not interrupt safety-related functions.
Direkomendasikan
High-Speed Communications Equipment
The XC7K160T-1FBG676C is appropriate for communications equipment requiring parallel datapaths, protocol conversion, buffering, and clock-domain-aware interface logic. Its 162,240 logic cells can support multiple packet-processing channels concurrently, and Kintex-7 programmable I/O allows system designers to select compatible standards for board-level links. The -1 speed grade provides a consistent timing target, but the final interface margin depends on board loss, reference clock quality, and the selected I/O standard. Engineers should use the AMD pinout and power-planning documentation, implement controlled-impedance routing, and validate eye masks and protocol compliance on physical prototypes. The FPGA configuration path should also be isolated so the communications payload is not exposed to unintended startup or update events.
Direkomendasikan
Signal Processing and Data Acquisition
The XC7K160T-1FBG676C can implement concurrent digital signal-processing channels for instrumentation, radar, communications, and high-speed data acquisition. The 162,240-cell Kintex-7 resource pool supports parallel filters, correlation, decimation, and data-format conversion without relying on a sequential processor for every sample. Its programmable I/O is valuable when multiple source interfaces must feed a common processing pipeline at controlled rates. Performance depends on clocking strategy, memory-resource placement, I/O standards, and timing closure at the -1 grade, so designers should use pipelined architectures rather than treating raw logic-cell count as a direct throughput guarantee. For laboratory equipment, the commercial ordering class should also be checked against the maximum ambient temperature and enclosure temperature at the FPGA.
Direkomendasikan
Test and Measurement Instrumentation
The XC7K160T-1FBG676C suits laboratory instruments that combine real-time acquisition, pattern generation, timing control, and data processing. Its 162,240 logic cells permit multiple instrument channels and state machines to operate concurrently, while programmable I/O supports multiple interface combinations when the selected voltage and timing standards are compatible. Engineers should partition acquisition, processing, and communications into deterministic timing regions and provide clean clocks to minimize measurement jitter. The 1 V core rail also requires careful sequencing and decoupling, especially when the instrument combines high-speed I/O with precision analog front ends. Before production, validate configuration repeatability, thermal behavior, and timing margin over the intended ambient range rather than relying only on simulation results.
Direkomendasikan
Video and Image Processing
The XC7K160T-1FBG676C can consolidate parallel video or image-processing functions into a programmable FPGA, including pixel transformation, synchronization, color conversion, and test-pattern generation. The Kintex-7 160T resource level provides more programmable logic than small CPLDs while retaining dedicated resources suitable for high-throughput data movement. Video interface selection must match the FPGA's supported I/O standards and the panel or sensor timing, while the clocking plan must account for fixed and programmable clock regions. Engineers should budget the output and input timing paths at the -1 speed grade and avoid building a design whose margins disappear after routing. Power and thermal analysis should include sustained pixel-clock activity because dynamic consumption can exceed a simple logic-utilization estimate.
Direkomendasikan
Aerospace and Defense Prototyping
The XC7K160T-1FBG676C can support laboratory prototypes and programmable control logic for aerospace, defense, radar, and electronic-systems evaluation. Its 162,240 logic cells and programmable I/O make it useful for parallel datapaths, protocol bridges, and real-time control experiments. However, the C suffix identifies the commercial ordering configuration, not an aerospace qualification; flight-system use requires an appropriately qualified device and an approved design-assurance process. Engineers must verify radiation, temperature, shock, supply tolerance, and configuration requirements independently rather than inferring them from the Kintex-7 family name. The board should implement the power sequencing, monitoring, and configuration redundancy required by the intended safety or mission profile.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk XC7K160T-1FBG676C — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XC7K160T-2FBG676C | XC7K160T-2FBG676I | XC7K160T-1FBG676I | XC7K160T-1FBG676E | XC7K160T-2FBG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Speed Grade | -1 | -2 | -2 | -1 | -1 | -2 |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Temperature Ordering Class | Commercial, C suffix, up to 85 °C | Commercial, C suffix, up to 85 °C | Industrial, I suffix | Industrial, I suffix | Extended temperature, E suffix | Extended temperature, E suffix |
Diferensiator Kunci
- Commercial -1 speed configuration (vsXC7K160T-2FBG676C)
- Industrial-temperature sibling for harsher operating environments (vsXC7K160T-1FBG676I)
- Extended-temperature upgrade path (vsXC7K160T-1FBG676E)
- Higher-speed design option within the same device family (vsXC7K160T-2FBG676I)
Catatan Desain
Use the package-specific AMD power architecture to separate the 1 V core rail from auxiliary and I/O supplies. Place decoupling capacitors at the locations and with the values specified for the FBG676 package; high-pin-count BGAs can fail because of return-path and plane-impedance issues even when the nominal supply voltage is correct. Verify startup sequencing, monitored rail thresholds, and current margin under maximum I/O activity before releasing the board for production.
Generate the PCB footprint and ball map directly from the AMD FBG676 package documentation rather than from a generic BGA676 library. Confirm ball pitches, pad and mask dimensions, component markings, solder-mask definition, and paste stencil from the released package data. Also verify the configuration pins and user I/O assignments for the selected design because a mechanically similar ball grid does not guarantee a valid logical replacement.
Thermal performance depends on the complete board stack-up, copper distribution, airflow, adjacent heat sources, and FPGA activity. Begin with the manufacturer power-estimation workflow using the actual clocking, memory, I/O, and logic utilization. Compare junction-temperature estimates with the assembly's ambient limit, then add thermal vias, heat spreaders, or forced cooling only after the board-level heat-flow analysis identifies the required improvement.
Preserve signal integrity on clocks, high-speed serial links, parallel buses, and memory interfaces by following the AMD board-design guidance for each I/O standard. Use the correct reference-plane transitions, length matching, and termination networks for the selected interface. Validate the final layout with a signal-integrity simulation because package parasitics, connector and via structures, and board-level return paths can materially change timing and voltage margins.
Do not treat XC7K160T-1FBG676I as an unconditional substitute for XC7K160T-1FBG676C. The industrial suffix changes the environmental ordering class, while an FFG package designation would require confirmation of the complete AMD pinout and power compatibility. Verify the exact ordering code, temperature class, speed grade, configuration interface, and ball map, and re-run timing and power analysis before releasing a replacement for production.
Informasi Konformitas
The available manufacturer and distributor results confirm the Kintex-7 family and device details but do not explicitly establish the requested compliance classifications. AEC-Q100 is not applicable to this standard commercial FPGA ordering configuration.