XMC4200F64K256BAXQSA1 - 80MHz Cortex-M4 MCU | Infineon
MPN: XMC4200F64K256BAXQSA1 ✓ AktifXMC4200F64K256BAXQSA1 Ringkasan
An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control applications. Positioned within the hierarchy of Cortex-M processor, embedded microcontroller, semiconductor, and industrial automation electronics, the XMC4200 provides a platform for combining deterministic control loops with communications, data acquisition, and supervisory functions.
The principal device characteristics include an 80 MHz Cortex-M4 core, 256 KB flash, 40 KB SRAM, and 32-bit processing. Its 256 KB flash provides room for application code, configuration data, and real-time control routines, while the 40 KB SRAM supports working memory, buffers, stacks, and peripheral data. The device is identified for industrial applications in the XMC4000 family.
The XMC4200 family architecture combines a Cortex-M4 processing core with embedded control peripherals. This makes it suitable for systems that must execute multiple control tasks while responding to external inputs. Pin and peripheral assignments must be checked against the manufacturer pin-description table because alternate functions and package-specific mappings determine whether each signal can be used as intended.
Typical uses include industrial motor and power-control systems, industrial automation controllers, and communication-oriented embedded nodes. The 64-pin LQFP package offers more interface options than smaller microcontroller packages, which can reduce the need for external I/O expansion when a design has been planned around the available pin map.
For PCB design, place the device on a multilayer board with a short ground return beneath the exposed pad area, connect all supply pins as specified in the datasheet, and decouple the supply rails close to their pins. Confirm the exact thermal-pad connection and pin-1 orientation before fabrication, especially when using the manufacturer’s evaluation-board layout as a reference.
This product record combines the manufacturer ordering information with distributor technical descriptions, package and memory details, application guidance, procurement facts, and a focused design checklist. It is intended to help engineers confirm the correct device and plan an industrial Cortex-M4 control board with fewer component-level and footprint errors.
Alternatif penggantian untuk XMC4200F64K256BAXQSA1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian XMC4200F64K256BAXQSA1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Application Classification, Architecture, Flash Memory, Operating Supply Voltage.
XMC4200F64F256BAXQMA1
✅ Drop-InKontak untuk harga
Lihat Datasheet →XMC4200F64K256BAXQSA1 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Series | XMC4200 series |
| Product Family | XMC4000 family |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Architecture | 32-bit ARM |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 40 KB |
| Tegangan Pemuat Kerja | 1.3 V to 3.3 V |
| Nominal Supply Voltage | 3.3 V |
| Paket | PG-LQFP-64, 64 pins |
| Tipe Mounting | Surface mount |
| Application Classification | Industrial |
| Core Count | 1 |
XMC4200F64K256BAXQSA1 pg-lqfp-64, 64 pins Diamant Konfigurasi Panduan
Konfigurasi pin untuk XMC4200F64K256BAXQSA1 (pg-lqfp-64, 64 pins pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk XMC4200F64K256BAXQSA1.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
XMC4200F64K256BAXQSA1 cocok untuk 6 aplikasis: Industrial Motor Control, Industrial Automation Controller, Power Conversion Supervision, Communication Equipment Node, Data Acquisition and Monitoring, Embedded Programmable Control Module.
Industrial Motor Control
The Infineon XMC4200F64K256BAXQSA1 fits industrial motor-control supervisory and embedded control functions because its ARM Cortex-M4 core operates at 80 MHz and provides 256 KB of flash plus 40 KB of SRAM. The processing headroom supports control-state calculations, communication handling, and diagnostic sequencing around a power-conversion stage. Its 1.3 V to 3.3 V operating range also fits common embedded rail combinations. Before finalizing the design, verify the required timer channels, PWM outputs, position-sensing interfaces, analog inputs, and pin multiplexing against the XMC4200 datasheet. The 64-pin PG-LQFP-64 footprint should be checked for the exact exposed-pad land pattern and thermal-current requirements of the motor-drive board.
Industrial Automation Controller
The XMC4200F64K256BAXQSA1 can serve as the central controller in a compact industrial automation node that combines sensor processing, local logic, communications, and supervisory functions. Its 80 MHz Cortex-M4 core provides deterministic 32-bit execution, while 256 KB of flash accommodates application code and 40 KB of SRAM supports protocol buffers and working state. The 64-pin package offers a practical pin count for discrete I/O, serial links, and analog channels when board space is constrained. Design the power tree around the specified 1.3 V to 3.3 V range, provide local bypass capacitance, and confirm each peripheral mapping in the manufacturer pin table before assigning industrial field inputs or outputs.
Power Conversion Supervision
The Infineon XMC4200F64K256BAXQSA1 is appropriate for supervisory control in industrial power-conversion equipment where a real-time processor must coordinate measurements, fault handling, and communication. Its 80 MHz Cortex-M4 performance supports rapid task scheduling without requiring a high-end application processor, and the 256 KB flash and 40 KB SRAM provide dedicated code and data space. The device should be placed on the control side of the power stage rather than replacing high-current switching or power-conversion components. Confirm available ADC channels, comparator functions, timer behavior, fault inputs, and communication interfaces in the XMC4200 documentation. Thermal design must account for regulator and controller heat dissipation near the power stage, including the package exposed-pad connection.
Communication Equipment Node
The XMC4200F64K256BAXQSA1 can support an embedded communications node that handles local protocol conversion, supervisory logic, and real-time I/O. The 256 KB flash provides space for communication stacks and application firmware, while 40 KB of SRAM can accommodate packet buffers, queues, and control state. Its 80 MHz 32-bit core is suitable for protocol processing that must coexist with deterministic control tasks. Because the exact XMC4200 peripheral inventory must guide the design, review USART, SPI, USB, CAN, and timer availability for the selected package before committing to a network architecture. Keep high-speed or long interconnect routes away from sensitive analog inputs and follow the reference layout for supply decoupling and grounding.
Data Acquisition and Monitoring
The XMC4200F64K256BAXQSA1 is suited to embedded monitoring functions that acquire sensor information, apply filtering, record operating states, and present results through a communications interface. Its 80 MHz processing rate allows control and acquisition tasks to run within one microcontroller, while 256 KB of flash and 40 KB of SRAM support code, calibration data, and short-term buffers. The 1.3 V to 3.3 V supply range supports integration with industrial signal-conditioning electronics, provided analog and digital rails meet their respective limits. Confirm the required ADC resolution, sampling behavior, trigger inputs, and digital I/O availability in the manufacturer datasheet. Pay particular attention to grounding and decoupling when analog measurements must remain stable beside switching circuitry.
Embedded Programmable Control Module
The XMC4200F64K256BAXQSA1 is well suited to a compact programmable control module built around the XMC4000 architecture. The 80 MHz Cortex-M4 core handles application logic, the 256 KB flash stores firmware, and the 40 KB SRAM supports the working state of real-time tasks. Its 64-pin PG-LQFP-64 package makes it suitable for boards that need moderate I/O density without moving to a very large leaded package. A robust design should separate sensitive analog routing from communication and switching nodes, validate startup behavior, and follow the manufacturer evaluation-board layout for power and exposed-pad treatment. Before using the part in a safety-related system, review the applicable safety standards, diagnostic coverage, and qualification requirements.
Data referensi engineering untuk XMC4200F64K256BAXQSA1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | XMC4200F64F256BAXQMA1 |
|---|---|---|
| Package | PG-LQFP-64, 64 pins | 64-pin LQFP/TQFP class |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB |
| Series | XMC4200 / XMC4000 family | XMC4200 |
| Ordering Code Flash Designator | K256 | F256 |
| Packing | Tray | Tray |
Diferensiator Kunci
- Industrial XMC4000-family positioning (vsXMC4200F64F256BAXQMA1)
- Defined memory configuration (vsXMC4200F64F256BAXQMA1)
- 64-pin integration density (vsXMC4200F64F256BAXQMA1)
Catatan Desain
Use the Infineon XMC4100/XMC4200 manufacturer pin-description table to assign every signal on the 64-pin PG-LQFP-64 footprint. Confirm pin-1 orientation, exposed-pad geometry, supply pins, ground pins, and all alternate functions against the package drawing. Place decoupling capacitors close to the associated supply pins, and preserve short return paths to the ground plane. Treat the exposed pad as a package-specific land feature and follow the manufacturer layout recommendation rather than substituting a generic 64-pin LQFP footprint.
Design the XMC4200F64K256BAXQSA1 supply rails within the specified 1.3 V to 3.3 V operating range. The manufacturer datasheet should govern the number, voltage rating, tolerance, and placement of bypass capacitors. Check the device’s operating voltage against peripheral requirements, particularly when the same board combines 3.3 V communication or digital interfaces with lower-voltage I/O. Verify power-up and power-down behavior in the final rail sequence rather than assuming that all domains can be energized or removed simultaneously.
Thermal performance depends on the PCB copper available to the exposed pad and the nearby heat sources. For a control board placed next to a switching regulator, maintain copper area under the package, use thermal vias where recommended by the land pattern, and avoid enclosing the device in an unventilated enclosure with other heat-producing components. Validate the worst-case ambient temperature and processing activity in system testing. The final thermal margin should include regulator dissipation as well as microcontroller self-heating.
Do not substitute another 64-pin Cortex-M4 solely because the package and flash capacity match. A microcontroller replacement must also match pin multiplexing, power pins, reset and debug signals, clock requirements, peripheral functions, flash programming, startup behavior, and software dependencies. In particular, the K256 and F256 ordering-code distinction requires verification against the manufacturer ordering information. Review the application’s device configuration and peripheral mapping even when the alternative appears electrically similar.
Informasi Konformitas
The device is identified as an industrial microcontroller. Exact material-compliance declarations and automotive qualification status should be confirmed for the selected ordering code.
