筐体・ハードウェア
製品 (9)
50-16000-386R-Z - CS1504 Serial to USB Converter Cable | Zebra
The Zebra Technologies 50-16000-386R-Z is a serial-to-USB converter cable assembly that converts the CS1504 serial (RS-232 style) interface to a USB interface, enabling direct connection of CS1504-based Zebra (formerly Motorola/Symbol) barcode scan peripherals to modern PC USB ports. The assembly is RoHS compliant and is supplied as a finished, molded cable with an integrated serial-to-USB conversion function. A cable assembly of this type belongs to the broader hierarchy of interconnect products: cable assembly -> data/communication cable -> USB converter cable -> peripheral connectivity accessory. Unlike passive serial cables, this assembly embeds active conversion electronics that translate the CS1504 serial signaling protocol into USB-serial data the host operating system can enumerate, eliminating the need for a separate RS-232 port or standalone protocol converter box. Key characteristics include the CS1504 serial-to-USB conversion function, RoHS compliance, and factory-molded connector overmolds for strain relief in retail and warehouse environments. The cable is sold as a universal accessory for Zebra/Motorola/Symbol scan devices that use the CS1504 serial connection standard, so no driver-side hardware change is required when migrating legacy serial peripherals to USB-equipped hosts. From a technical standpoint, the assembly offloads protocol conversion from the host: the converter electronics present a virtual serial port over USB, so application software that expects a COM-port device continues to operate without modification. This makes it a low-friction migration path for point-of-sale and inventory systems where serial ports have disappeared from modern PC hardware. Typical applications include retail point-of-sale workstations, warehouse inventory terminals, healthcare specimen and medication scanning stations, and library checkout systems, all of which commonly pair CS1504 serial scan peripherals with USB-only PCs. When deploying, verify the host OS provides the appropriate USB-serial (virtual COM port) driver class and confirm the connected peripheral is a CS1504 serial-interface device; this cable is not a generic RS-232 adapter and must not be used with non-CS1504 serial devices. This page synthesizes distributor pricing, availability data, and deployment guidance from multiple authorized resellers, information not consolidated in any single manufacturer document.
A9KV2-DC-CBL-E - ASR 9000v-V2 DC Power Cable ETSI | Cisco
The Cisco A9KV2-DC-CBL-E is a DC power cable designed specifically for the Cisco ASR 9000v-V2 Satellite Shelf with ETSI connector, providing direct-current power feed from a data center DC power plant to the shelf. It is a genuine Cisco Systems spare for network operators running the ASR 9000 series aggregation platform in DC-powered (ETSI) environments. A DC power cable is a power-distribution interconnect that carries direct current from a rectifier plant or DC distribution panel to networking equipment. In the service provider hierarchy, it sits between the facility DC power infrastructure and the router or satellite shelf power supply modules. DC powering is widely used in carrier and data center environments because it enables efficient power transmission, reduced energy conversion losses, and stable operation for high-availability networking gear. Key characteristics of the A9KV2-DC-CBL-E include its purpose-built compatibility with the ASR 9000v-V2 Satellite Shelf (DC ETSI variant), an ETSI-standard connector interface, and genuine Cisco manufacturing that guarantees compatibility and warranty compliance. The cable is finished in black and is orderable both as A9KV2-DC-CBL-E and as the spares-orderable suffix A9KV2-DC-CBL-E=. Distributor listings place the part under UNSPSC code 26121636, and typical street pricing ranges from approximately $186.99 to $207.99 USD as of 2026-10-19. Architecturally, the ASR 9000v-V2 satellite shelf extends the Cisco ASR 9000 Series aggregation router to remote locations, and the DC power cable is the mandated power-feed accessory for the DC/ETSI version of that shelf. Using third-party or generic cables risks connector mismatch and voids Cisco hardware warranty coverage, so Cisco specifies this exact MPN in the ASR 9000 satellite system installation documentation. Typical applications include central offices, carrier hotel installations, and service provider data centers deploying ASR 9000v-V2 satellite shelves where -48V DC ETSI power plants are the standard. It is also used during rack integration and spare-parts stocking programs. When installing, verify the DC plant polarity and breaker rating against the shelf installation guide, and follow Cisco torque and grounding requirements for the ETSI connector. This page synthesizes distributor pricing from Zones, 4networks, Tech-America and other resellers, drop-in replacement guidance, and installation-oriented design notes not found on any single distributor page.
CAI-NVES7T6K1V - 7.6TB NVMe E1.S Enterprise SSD | Cisco
The Cisco CAI-NVES7T6K1V is a 7.6TB enterprise solid state drive in the E1.S 15mm form factor, built on the Kioxia XD7P high-performance, medium-endurance NAND platform with a PCI Express 4.0 (Gen4) x1 NVMe interface for Cisco UCS C-Series rack servers. An enterprise NVMe SSD is a flash storage device that attaches directly to the PCIe bus, bypassing legacy SATA/SAS controller layers to reduce latency and raise IOPS. Within the storage hierarchy, it sits above HDDs and SAS SSDs as a solid state storage device, a class of non-volatile memory subsystems central to modern data center storage architectures. Key features include 7.6TB raw capacity for dense, space-constrained server storage, hot-pluggable E1.S 15mm packaging that permits drive replacement without server shutdown, and the PCIe 4.0 NVMe 1x link that sustains data-intensive workloads. The Kioxia XD7P silicon is characterized as high performance, medium endurance, balancing read-heavy transactional throughput against acceptable drive-writes-per-day ratings. Technically, the drive integrates Kioxia BiCS flash with an enterprise NVMe controller and firmware tuned for Cisco platforms, validated against Cisco UCS thermal and power envelopes for the E1.S bay. Cisco part numbering (CAI-NVES prefix) denotes NVMe enterprise SSDs qualified for UCS C-Series and similar rack systems. Typical applications include AI/ML data pipelines, high-capacity warm-storage tiers, virtualization and database read caching, and general-purpose enterprise server boot-and-data storage where E1.S density matters. Design consideration: confirm your server chassis supports the 15mm E1.S profile; 9.5mm bays will not accept this drive. Note the announced end-of-sale date of 2026-12-25 when planning long-term spares. This page synthesizes distributor pricing, lifecycle data, and compatibility guidance not found in any single vendor listing. Pricing references are as of 2026-10-19.
CBA-U01-S07ZAR-Z - 2.13m USB Scanner Cable 7ft | Zebra
The Zebra Technologies CBA-U01-S07ZAR-Z is a shielded 2.13 m (7 ft) USB data transfer cable with a straight USB Series A connector, designed to connect Zebra (formerly Motorola/Symbol) corded barcode scanners to host devices. The cable supports USB Battery Charging 1.2 (BC 1.2) high-current operation, allowing compatible scanners to draw the power they need over the USB bus without an external supply. A USB data transfer cable is a pre-terminated cord set that carries both power and serial-over-USB data between a peripheral and a host PC or terminal. In the barcode scanning hierarchy, this cable sits between the imaging engine (scanner) and the host interface layer, converting the scanner's keyboard-wedge or USB-HID/USB-POS output into a standard USB connection. It belongs to the broader families of USB cable assemblies, shielded peripheral cables, and automatic identification and data capture (AIDC) accessories. Key features include a 2.13 m straight-cable form factor for desk and counter use, shielded construction that suppresses EMI in electrically noisy retail and industrial environments, a USB Series A connector on the host side, and BC 1.2 high-current support. The cable is plug-and-play with no driver or configuration required on the cable itself. The construction uses a shielded jacket around twisted signal pairs, maintaining signal integrity for USB full-speed data while carrying the scanner's operating current. Strain relief at both connector overmolds supports repeated plug cycles typical of point-of-sale and warehouse deployments. Typical applications include connecting Zebra LS2208, DS2208, DS9208, LI4278, and DS8178 series handheld scanners to POS terminals, warehouse workstations, medical check-in desks, and retail checkout counters where a 2 m reach is sufficient. When planning cable routing, remember that 2.13 m is the practical limit for reliable USB operation without active extension; do not chain passive USB extensions beyond the USB specification length budget. This page synthesizes distributor pricing from multiple sources, same-brand drop-in alternatives, and practical deployment notes not consolidated in the manufacturer accessory guide.
HUS724030ALS640 - 3TB Ultrastar 7K4000 SAS 6Gb/s HDD | HGST/WD
The HGST (now Western Digital) HUS724030ALS640 is a 3 TB enterprise-class 3.5-inch hard disk drive from the Ultrastar 7K4000 family, spinning at 7200 RPM and interfaced through a 6 Gb/s SAS (Serial Attached SCSI) dual-port connection. As a 5-platter air-filled design, it delivers a sustained 3 TB capacity point with a 64 MB cache buffer and is engineered for 24x7 datacenter workloads, with a published 2.0 million-hour MTBF rating and a 5-year limited warranty. The drive supports 512n sector format and 6 Gbit/s SAS link speed for compatibility with mainstream server backplanes. A hard disk drive (HDD) is a non-volatile electromechanical storage device that records data on rotating magnetic platters using a moving actuator arm and read/write heads. Within the storage hierarchy, HDDs sit above tape and below SSDs in cost-per-gigabyte terms, providing the highest-density bulk storage tier for capacity-optimized workloads such as cold data archival, backup targets, and hyperscale object stores. The Ultrastar 7K4000 line specifically targets the enterprise-capacity segment where high MTBF, predictable latency, and dual-port SAS redundancy are mandatory for RAID and tiered storage arrays. Key features of the HUS724030ALS640 include an 8.0 ms average seek time, a 4.16 ms average latency, and 7200 RPM rotational speed, which together yield sequential throughput of approximately 150-170 MB/s for large-block reads. Advanced power modes cut idle power by 59% compared to previous generations, and standby/sleep consumption is rated below 2 W, allowing dense JBOD chassis to operate within their thermal envelope. The drive carries a workload rating of up to 550 TB/year and is rated for 2.0 million hours MTBF. In its architecture, the HUS724030ALS640 uses a sixth-generation HGST 5-platter mechanical platform with PMR (perpendicular magnetic recording), 512-byte native sector emulation, and a dual-port SAS interface that enables redundant paths to the host. The 6 Gbit/s SAS physical layer is hot-pluggable and supports zoning in expanders, and the drive presents a standard SCSI INQUIRY signature so it integrates with virtually any SAS HBA or RAID controller. Self-encrypting and instant-erase variants exist in the broader 7K4000 family but are not part of this specific ALS640 SKU. Typical applications include enterprise NAS enclosures, RAID-6 and RAID-10 server arrays, cold-storage object servers, video surveillance retention vaults, and hyperscale capacity tiers where $/TB, MTBF, and SAS dual-port redundancy outweigh the higher IOPS of an SSD. Use cases span from large backup targets to mail spool storage, log retention, and bulk media archives. When designing with this drive, ensure the chassis backplane provides 6 Gbit/s SAS signaling, the host HBA supports dual-port zoning if you intend to leverage both SAS ports, and the ambient temperature stays within the 5C to 60C operating envelope. Allow at least 8 seconds for the spindle to reach full speed during spin-up; staggered spin-up controllers prevent simultaneous inrush on large chassis.
QQ9937 - Belden Cat5e Fast Ethernet Data Cable | Belden
The Belden 9937 is a Fast Ethernet Cat5e data single-ended cordset cable designed for industrial Ethernet and signal transmission applications. It is a shielded twisted-pair cable built around 24-25 AWG conductors with FPE (foamed polyethylene) insulation, an overall aluminum/Mylar foil shield plus a tinned copper braid shield, and a PVC outer jacket rated CM (communications). The construction delivers robust EMI/RFI immunity suitable for noisy industrial environments such as factory automation cells, motor-drive cabinets, and process control rooms. A shielded twisted-pair (STP) cable is a balanced transmission medium that uses 90-ohm nominal differential impedance and twisted conductors to cancel common-mode noise, allowing Gigabit and Fast Ethernet signaling to coexist with motor drives, VFDs, and switching power supplies. Within the broader cable hierarchy, Belden 9937 sits in the data-communication / industrial-Ethernet branch, below generic power cables and above unshielded twisted-pair (UTP) Cat5e offerings; it serves as the physical layer that connects PLCs, HMIs, vision systems, and industrial Ethernet switches. Key features include a 100 MHz bandwidth rating (Cat5e), characteristic impedance of 100 ohms, an overall foil + braid double-shield construction for EMI suppression, and a CM-rated PVC jacket suitable for in-wall and tray installation. Operating temperature range is typically -30C to +75C, and the cable is RoHS compliant per Belden product literature. The construction pairs 24-25 AWG solid or stranded tinned copper conductors with FPE dielectric, achieving low capacitance (~13 pF/ft typical) and low attenuation at 100 MHz. The aluminum/Mylar foil shield provides 100% coverage against high-frequency interference while the tinned copper braid adds mechanical ruggedness and low-frequency EMI suppression. This dual-shield approach makes the 9937 well-suited for installations adjacent to variable-frequency drives and other switching-noise sources. Typical applications include industrial Ethernet backbone cabling, PLC-to-PLC communication links, motor-drive feedback signal wiring, factory-floor network drops, and SCADA system interconnects. It is also used in machine vision systems where deterministic data integrity is required. When routing the 9937, maintain at least 12 inches of separation from VFD power cables and cross power conductors at 90-degree angles when crossing is unavoidable. The overall braid shield must be terminated 360 degrees at both ends to chassis ground using metal backshells to realize the full EMI rejection benefit. This page synthesizes distributor pricing, drop-in alternatives, and practical installation guidance not found in the manufacturer datasheet, helping engineers select and deploy the correct shielded Ethernet cable for industrial environments.
S0T23 - SOT-23 Package Designator Query | Not a Component MPN
S0T23 is not a component part number. Verification against distributor and manufacturer sources (DigiKey, Mouser, Octopart, alldatasheet.com, diodes.com, nexperia via mouser.com/pdfdocs) confirms that S0T23 (most likely a zero-for-O misspelling of SOT23) is a PACKAGE DESIGNATOR, not an orderable electronic component. SOT-23 is the JEDEC TO-236AB small-outline transistor package: a 3-lead (or 5/6-lead in SOT23-5/SOT23-6 variants) plastic surface-mount package approximately 2.9 mm x 1.3 mm with a 1.9 mm lead span, used across virtually every semiconductor manufacturer including STMicroelectronics, Diodes Incorporated, Nexperia, Infineon, and Micro Commercial Components. A package designator such as SOT-23 defines physical dimensions, pad layout, and tape-and-reel orientation, but carries no electrical parameters of its own. Electrical specifications (voltage, current, on-resistance, gain) belong to the specific device housed in the package - for example, the STMicroelectronics STG719 SPDT switch (1.8V to 5.5V, 4 ohm on-resistance at 5V) or the AO3400 N-channel MOSFET (30V, 5.8A, 28 milliohm) both ship in SOT-23. What is a small-outline transistor package? The SOT (Small Outline Transistor) family comprises small, inexpensive surface-mount plastic-molded packages with leads on two sides. SOT-23 and SC-70 are the two most widely used members, dominating consumer electronics, portable devices, and DC-DC converter designs. To source actual parts, identify the device marking on the physical component, or consult the schematic BOM, then search that true MPN (e.g., AO3400, STG719, BAV99, MMBT3904). Typical SOT-23-housed device categories include small-signal transistors, MOSFETs, dual diodes, voltage supervisors, LDO regulators, and RF switches. This page exists to clarify the S0T23/SOT23 ambiguity, provide the JEDEC TO-236AB package context, and direct engineers to the correct orderable MPN. No electrical specifications, pricing, pinout, or alternatives are listed because none exist for a package-only query - all such fields are marked as needing data rather than fabricated.
Tape - Industrial Pressure-Sensitive Adhesive Tape | Cross-Manufacturer
The industrial Tape product category represents a class of pressure-sensitive adhesive (PSA) backed film, paper, cloth, foil, or foam constructions supplied in roll form and selected by backing material, total thickness, peel adhesion, tensile strength, elongation, and operating temperature. The target entry "Tape" is a generic category designation rather than a single factory part number, so its parametric envelope is necessarily broad: backing thickness commonly spans 0.025 mm (polyester film) to 0.5 mm (PTFE glass cloth), total construction thickness from 0.05 mm to 1.0 mm, 180-degree peel adhesion to steel from 10 oz/in (low-tack masking) to over 100 oz/in (high-bond VHB), and operating temperature from -65 degrees C (acrylic foam) to +260 degrees C (silicone-coated glass cloth). What is pressure-sensitive adhesive tape? A PSA tape is a composite of a flexible backing and a permanently tacky adhesive that adheres to a substrate under light finger pressure at room temperature, requiring no solvent, water, or heat activation. PSA tapes sit within the broader adhesive bonding family alongside reactive adhesives (epoxy, cyanoacrylate), hot-melt adhesives, and contact cements, but are distinguished by their instant grab, clean removability (for some formulations), and ability to be die-stamped into precision shapes for production-line assembly. The category hierarchy is: adhesive product > pressure-sensitive adhesive > PSA tape > film/foam/cloth-backed tape. Key features engineers typically evaluate when selecting a tape include: backing material (polyimide/Kapton, polyester/PET, PTFE, glass cloth, paper, PVC, aluminum foil), adhesive chemistry (acrylic, rubber, silicone, hot-melt), adhesive thickness, liner type (kraft paper, filmic), elongation at break, dielectric strength for electrical insulation use, and UL 746C recognition for plastics adhesion. Representative datasheets in the verified web data demonstrate the parameter set: Intertape Premium Packing Tape lists nominal thickness, tensile, adhesion, and elongation per PSTC/ASTM methods; UltraTape cleanroom tape lists backing, adhesive, thickness, 180-degree peel to steel (minimum), operating temperature, elongation at break, and tensile; 3M VHB tape documents adhesion to a broad material range, conformability, plasticizer migration resistance, and UL 746C recognition. Typical application domains include packaging and carton sealing, electrical insulation and coil wrapping, masking during PCB conformal coating and powder coating, splicing and core-starting in paper/film converting, cleanroom particle/dust containment, automotive trim attachment, EV battery cell bonding and thermal interface, HVAC duct sealing, and medical device fixation. Application trade-offs include using silicone adhesive for high-temperature silicone-substrate bonding (>200 degrees C), acrylic for long-term UV-stable outdoor bonding, and rubber-resin for high-tack low-temperature carton sealing. The selected tape must always be verified against substrate surface energy (dyn/cm), contamination, and thermal-mechanical exposure profile before production release.
UB Universal Beam - Hot Rolled Structural Steel Section | British Standard
UB (Universal Beam) is a hot-rolled I-shaped structural steel section manufactured to British Standard dimensions, widely used as the load-bearing skeleton of steel-framed buildings, bridges, and industrial structures across the UK, the Middle East, and Commonwealth markets. A typical UB is designated by its serial size in millimetres followed by its mass per metre in kilograms (for example, UB 457 x 152 x 60 = 457 mm deep x 152 mm wide flange x 60 kg/m). The UB range spans light sections such as UB 127 x 76 x 13 up to heavy sections like UB 1016 x 305 x 487, with parallel inner and outer flange surfaces that simplify bolted end-plate and bearing-plate connections. A Universal Beam is a category of hot-rolled structural steel section whose cross-section forms the capital letter I - a tall vertical web flanked by two horizontal flanges. Within the British Standards family it sits alongside the Universal Column (UC), which has a near-square flange and is optimised for axial compression; the UB, in contrast, is optimised for bending about its strong axis. In the structural steel taxonomy, UBs fall under the parent category of hot-rolled sections, then I-sections, then beams, then long products used in construction. British Steel is the only UK manufacturer of UB sections and produces them under BES 6001 certification with CE and UKCA marking. Key features of UB sections include parallel flanges for simpler connection detailing, a wide size range covering spans from approximately 1 m to over 30 m, and availability in multiple steel grades: S235JR, S275JR/J0/J2 and S355JR/J0/J2 to EN 10025-2:2004, plus equivalent ASTM A36, A572 Gr 50 and A992 Gr 50 grades for export markets. Lengths are typically supplied 6 m to 18 m as standard, with project-specific cutting and cambering available from service centres. Technically, UB sections are rolled from continuously-cast billets through a sequence of breakdown, intermediate, and finishing stands that progressively shape the I profile. The parallel-flange geometry - distinct from the older tapered-flange RSJ - allows moment-resisting connections to use flush end-plates without major cope-cutting. Mass-per-metre values, section depths, flange widths, web and flange thicknesses, root radii, and second-moment-of-area values are tabulated in the British Steel Universal Beams datasheet. Typical applications of UB sections include primary beams in multi-storey commercial buildings, rafters in portal-framed warehouses, crane girders in industrial facilities, bridge girders for short- to medium-span highway and rail crossings, and mezzanine floor joists. The choice between UB, UC, IPE, HEA and HEB depends on regional design code (BS 5950 / Eurocode 3 / AISC), loading type (predominantly bending vs axial) and connection detailing preferences. When specifying a UB, the designer should confirm grade, length, tolerance class (EN 10034), and any supplementary requirements such as CE marking, third-party inspection, or impact testing at sub-zero temperatures. For seismic or fatigue-sensitive applications, through-thickness property guarantees (Z15/Z25/Z35 to EN 10164) should be considered. This page synthesises British Steel datasheet values, regional equivalent mapping (UB vs IPE vs W-shape), and practical specification guidance not consolidated in a single manufacturer document.