集積回路

PIC24F08KL302-E/SS

PIC24F08KL302-E/SS - 16-bit 32MHz MCU, 8KB Flash | Microchip

The Microchip PIC24F08KL302-E/SS is a cost-effective 16-bit PIC24F microcontroller featuring nanoWatt XLP eXtreme Low Power technology, 8KB of Flash program memory, 1KB of RAM, and 256 bytes of EEPROM, housed in a 28-pin SSOP package. It operates from a 1.8V to 3.6V supply at up to 32MHz, integrating 22 I/O pins, one MSSP supporting I2C and SPI, one CCP/ECCP module, 10-bit ADC, and multiple 16-bit timers. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit datapath, register file, and instruction word, sitting architecturally between 8-bit MCUs (PIC16/PIC18) and 32-bit Cortex-M cores. The PIC24F belongs to the 16-bit MCU family within the broader category of microcontrollers -> embedded processors -> semiconductors. The 'KL' sub-family emphasizes low-power, low-cost designs with simplified peripherals targeted at cost-sensitive consumer, appliance, and IoT edge-node applications. Key features include nanoWatt XLP technology with sub-uA sleep currents suitable for battery-powered designs, deep sleep and idle modes with peripheral retention, an integrated 10-bit ADC with automated scanning, and Peripheral Pin Select (PPS) for flexible signal routing. The PIC core uses a modified Harvard architecture with a 16-bit instruction word and 24-bit instruction width, executing most instructions in one cycle. Typical applications include home appliances, white goods, sensor nodes, battery-powered wearables, low-cost motor control loops, and consumer remote controls. The wide 1.8-3.6V operating range and low sleep current make the part well suited for designs powered directly from a 3V coin cell or two AA cells. When designing with this device, pay attention to the programming/debug pin pair selection (PGECx/PGEDx) and supply decoupling near all VDD/VSS pairs. The internal 8MHz RC oscillator with PLL gives flexibility, but check the latest errata for revision-specific issues before committing to high-volume production.

見積もりお問い合わせ

PIC24F08KL302-I/ML

PIC24F08KL302-I/ML - 16-bit MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24F08KL302-I/ML is a 16-bit PIC24F microcontroller with 32MHz (16 MIPS) CPU performance, 8KB (2.75K x 24) of Flash program memory and 1KB SRAM, packaged in a 28-pin QFN (6x6 mm, ML suffix) form factor. It belongs to the nanoWatt XLP family, providing eXtreme Low Power consumption with sleep currents in the nanoamp range for battery-operated designs. Per the manufacturer datasheet, the device integrates peripherals such as MSSP (I2C/SPI), CCP/ECCP, 10-bit ADC, comparators, and multiple timer/capture modules to balance cost and flexibility. Background knowledge: A PIC24F 16-bit microcontroller is a member of the 16-bit MCU family, sitting above 8-bit PIC18/PIC16 parts in performance and below 32-bit PIC32 devices in raw compute. PIC MCUs are RISC-based Harvard-architecture devices in the broader category of microcontrollers (MCU) -> embedded controllers -> semiconductors. The 24F sub-family is optimized for low power and cost-sensitive applications, with XLP variants adding ultra-low-power sleep modes for energy harvesting and battery applications. Key features include 8KB Flash (2.75K instructions), 256 bytes EEPROM, 1KB SRAM, 23 I/O pins, 3 16-bit timers, 1 MSSP (I2C/SPI), 1 CCP/ECCP, 10-bit ADC with up to 9 channels, 2 comparators, and an internal 8MHz oscillator. The XLP features enable deep sleep currents down to ~20nA (per datasheet), making the part suitable for always-on IoT sensors. Wide operating voltage from 1.8V to 3.6V supports single-cell Li-ion or two-AA battery topologies. The PIC24F08KL302 family is built on a 16-bit modified Harvard CPU with a 32MHz internal oscillator. It is supported by Microchip's MPLAB X IDE and XC16 compiler, with extensive peripheral libraries. The QFN-28 package offers a compact 6x6 mm footprint with an exposed thermal pad, easing PCB thermal dissipation in dense layouts. Typical applications include IoT sensor nodes, wearable fitness/medical monitors, low-power wireless remote controls, consumer electronics like toys and small appliances, and battery-powered metering. The wide temperature range (-40C to +85C for the I-grade variant) supports indoor and outdoor industrial use, while the low sleep current extends battery life to years for periodic-sampling duty cycles. When designing with this device, ensure adequate decoupling (100nF ceramic close to VDD) and follow Microchip's QFN PCB layout guidelines (thermal pad vias) for reliable operation. The small QFN footprint eliminates hand-rework capability, so plan assembly and inspection procedures accordingly. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's own KL/KA family, and practical design notes not consolidated in the manufacturer datasheet. (v3.9 answer-capsule + unique-value page)

見積もりお問い合わせ

PIC24F08KL302-I/MQ

PIC24F08KL302-I/MQ - 8KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24F08KL302-I/MQ is a 16-bit PIC24F microcontroller with nanoWatt XLP (eXtreme Low Power) technology, featuring 8KB of Flash program memory (2.75K x 24), 1KB of SRAM, and 256 bytes of data EEPROM, housed in a 28-pin QFN (MQ) 5x5 mm package. The device integrates a 32 MHz MIPS16e CPU core, operates from 1.8V to 3.6V, and supports low-power run-mode currents under 350 µA/MHz at 1.8V per Microchip's PIC24F08KL302 datasheet. Peripheral highlights include MSSP (I²C/SPI), CCP/ECCP, multiple timers, and a 9-channel 10-bit ADC. A 16-bit microcontroller (MCU) is an embedded computing device with a 16-bit-wide data path, instruction set architecture (ISA), and registers. Compared with 8-bit MCUs, 16-bit devices offer higher code density, faster arithmetic, and richer peripherals while consuming less power than 32-bit Cortex-M parts. The PIC24F family sits in Microchip's nanoWatt XLP hierarchy: PIC10/12/16/18 (8-bit) -> PIC24F (16-bit low-power) -> PIC24E/dsPIC (16-bit high-performance / DSP). The 8KB Flash and 1KB RAM position this MCU between bare-bone 8-bit PICs and higher-end PIC24EP/dsPIC parts, targeting cost-sensitive applications that need 16-bit performance with eXtreme Low Power consumption. Key features include three power-managed modes (Run, Idle, Sleep), multiple oscillator options (HFINTOSC 8 MHz with 4x PLL up to 32 MHz, LFINTOSC 31 kHz), up to 23 I/O pins, and CTMU for capacitive-touch and mTouch sensing. The wide 1.8V-3.6V VDD range supports battery-powered designs including single-cell Li-Ion and two-AA operation. Hardware capacitive-touch support and Sleep currents below typical XLP targets make it suited for always-on sensor nodes. Architecture uses the 16-bit enhanced modified Harvard design with 24-bit instructions and 16-bit data, a 16-level hardware stack, and vectored interrupts. The 32 MHz system clock with PLL delivers 16 MIPS, sufficient for sensor-fusion edge algorithms, motor-control loops, and low-rate wireless protocol stacks. Cipher/HASH accelerators are absent, but CCP/ECCP provides PWM capture/compare for motor and lighting control. Typical applications include low-power sensor hubs, capacitive touch HMIs, handheld instruments, battery-powered IoT edge nodes, and cost-sensitive motor/lighting controls. Its drop-in migration path to other PIC24F KL/KA devices preserves firmware and PCB design across product families. When designing with the PIC24F08KL302-I/MQ, ensure ICD-capable pin assignments for in-circuit debug and reserve MCLR pull-up to meet Microchip programming-voltage requirements. Power-rail decoupling per datasheet recommendations (0.1 µF + bulk) is mandatory for ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, helping procurement and embedded engineers evaluate substitutes side-by-side.

見積もりお問い合わせ

PIC24F08KL302-I/SO

PIC24F08KL302-I/SO - 16-Bit XLP MCU 8KB Flash | Microchip

The Microchip Technology PIC24F08KL302-I/SO is a 16-bit PIC24F XLP microcontroller with 8 KB Flash, 1 KB SRAM, and 256 B EEPROM, running at up to 32 MHz from a 1.8 V to 3.6 V supply in a 28-pin SOIC package. It combines nanoWatt XLP eXtreme Low Power technology with classic PIC18 peripherals such as MSSP (I2C/SPI) and CCP/ECCP modules for cost-sensitive embedded designs. A microcontroller unit (MCU) is a self-contained computer on a single die that integrates a CPU core, program memory, data memory, and configurable peripherals. The PIC24F family sits within the 16-bit MCU segment of the broader embedded processing hierarchy: MCU -> embedded processor -> semiconductor. The PIC24F08KL302 targets applications that need more arithmetic headroom than an 8-bit PIC18 while retaining low pin count and low power. Key features include 8 KB Flash program memory (2.75K x 24-bit words), 1 KB SRAM, 256 B data EEPROM, a 16-bit architecture with hardware multiply/divide, and nanoWatt XLP sleep currents suitable for battery-powered products. The device integrates a 10-bit ADC, multiple 16-bit timers, UART, I2C, and SPI serial interfaces, and a real-time clock/calendar with alarm. The PIC24F08KL302 uses Microchip's flash-based CMOS process, allowing in-circuit serial programming and reprogramming. Its instruction set is optimized for C compilation, and the device is supported by MPLAB X IDE, MPLAB XC16 compiler, and the MPLAB ICD/REAL ICE debugger ecosystem, which shortens development time for cost-sensitive designs. Typical applications include portable medical monitors, battery-powered sensor nodes, consumer appliance control panels, smart meters, and industrial data loggers. The 28-pin SOIC package is easy to route on two-layer boards and is compatible with standard SOIC-28 land patterns. When designing with this MCU, decouple VDD pins with 0.1 uF ceramic capacitors placed close to the package, and use the internal oscillator or an external crystal depending on timing accuracy requirements. The XLP sleep modes allow multi-year battery life when the CPU is duty-cycled. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, cross-referencing, and layout decisions.

見積もりお問い合わせ

PIC24F08KL302T-I/MQ

PIC24F08KL302T-I/MQ - 8KB Flash 16-bit MCU 28-QFN | Microchip

The Microchip PIC24F08KL302T-I/MQ is a cost-effective PIC24F 16-bit microcontroller featuring nanoWatt XLP (eXtreme Low Power) technology, with 8KB of Flash program memory and 1KB of SRAM in a 28-pin QFN (MQ) 5x5 mm package. It operates from 1.8V to 3.6V, runs at up to 32 MHz, and integrates peripherals inherited from the PIC18 family such as MSSP (I2C/SPI) and CCP/ECCP to simplify migration from 8-bit designs. Key features include run-mode currents under 350 uA/MHz at 1.8V, multiple low-power sleep modes (Doze, Idle, Sleep), and a wide industrial temperature range of -40C to +85C. The 28-QFN package is footprint-compatible across the PIC24F08KL/KA families, which enables PCB reuse between pin-compatible variants and code-compatible derivatives. Architecturally, the PIC24F08KL302 uses the PIC24 16-bit modified Harvard core with a 16-element 16-bit working register file and a 32 kHz to 32 MHz internal oscillator, eliminating the need for an external crystal in many designs. The MSSP peripheral supports both SPI and I2C master/slave, while the 5 CCP/ECCP channels handle PWM and capture/compare functions. Integrated 10-bit ADC, comparators, and a hardware RTCC reduce BOM cost and PCB area. Typical applications include consumer white goods, low-cost sensor nodes, battery-powered IoT peripherals, e-metering front ends, and small appliances. The XLP feature set also makes it suitable for always-on wearable accessories and remote-control keyfobs. Because the KL/KA series shares its peripheral set with PIC18, designs that start with PIC18 can migrate upward to PIC24 without rewriting drivers. When designing with this part, note that the QFN package requires thermal vias under the exposed pad for proper heat dissipation. Decoupling capacitance of at least 100 nF placed within 3 mm of each power pin, plus a 10 uF bulk cap, is recommended for stable XLP sleep behavior. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KL302T-I/SO

PIC24F08KL302T-I/SO - 8KB Flash 16-Bit MCU 32MHz | Microchip

The Microchip Technology PIC24F08KL302T-I/SO is a low-power, low-cost 16-bit Flash microcontroller from the PIC24F KL3 family, featuring 8KB of Flash program memory, 1KB of SRAM, and 512 bytes of data EEPROM in a 28-pin SOIC (SO) package. It runs at up to 32 MHz CPU clock speed and operates from a 3.0V to 3.6V supply. The 'T' suffix indicates Tape & Reel packaging, 'I' denotes the Industrial operating temperature range (-40C to +85C), and 'SO' specifies the SOIC-28 package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and programmable peripherals on one die. The 16-bit PIC24F architecture sits in the hierarchy: 16-bit MCU -> Flash MCU -> low-power MCU -> embedded controller -> semiconductor. 8-bit PIC, 16-bit PIC24F, and 32-bit PIC32 families all coexist in Microchip's MCU portfolio; the 16-bit PIC24F KL-series targets cost-sensitive, low-power designs that need more computational headroom than 8-bit PIC18 parts. Key features of the PIC24F08KL302 include nanoWatt XLP eXtreme Low Power technology with deep sleep currents in the nanoamp range, 17 programmable I/O pins, a 10-bit ADC, MSSP (I2C/SPI), CCP/ECCP, and multiple timer modules. The KL3xx series adds peripheral flexibility by retaining PIC18-compatible peripherals for easy migration. With 8KB Flash (2.75K x 24 words), the part targets applications that need more code space than the 4KB PIC24F04KL1xx series but do not need the larger 16KB KL4xx parts. The PIC24F08KL302 uses a 16-bit modified Harvard architecture with separate program and data paths, enabling single-cycle instruction fetch. Its 32 MHz operation delivers 16 MIPS (Million Instructions Per Second), sufficient for sensor fusion, simple UI control loops, and modest communication stacks. The KL3 family retains PIC18-style peripherals (MSSP for I2C/SPI, CCP/ECCP) to shorten firmware porting time from PIC18 designs. Typical applications include battery-powered IoT sensor nodes, consumer appliances, low-cost motor control loops, USB HID-class input devices, and industrial sensor interfaces. The 10-bit ADC and small footprint make it well suited for thermostat and smoke detector designs. When designing with this part, allocate at least one decoupling capacitor (100 nF X7R) per VDD pin, place the crystal/oscillator traces short and guarded by ground, and ensure the MCLR pin has a proper pull-up if unused programming/debugging access is needed via ICSP. Use MPLAB X IDE with XC16 compiler for firmware development; debugging requires a PICkit or MPLAB ICD programmer. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24F family, application notes, and design considerations not assembled in any single datasheet - giving engineers and buyers a one-stop reference for the PIC24F08KL302T-I/SO.

見積もりお問い合わせ

PIC24F08KL302T-I/SS

PIC24F08KL302T-I/SS - 16-bit 8KB Flash MCU, 32MHz XLP | Microchip

The Microchip PIC24F08KL302T-I/SS is a 16-bit Flash microcontroller from the PIC24F KL3 family featuring nanoWatt XLP eXtreme Low Power technology, 8KB of Flash program memory (2.75K x 24 words), 1KB of data SRAM, and a 10-bit ADC with up to 12 input channels. It operates at 32MHz (8 MIPS) from a 1.8V to 3.6V supply in a 28-pin SSOP package and is rated for the industrial -40C to +85C temperature range. A PIC24F microcontroller is a 16-bit RISC MCU built on Microchip's enhanced Harvard architecture; the KL3 sub-family targets cost-sensitive applications by migrating familiar PIC18 peripherals (MSSP I2C/SPI, CCP/ECCP, 10-bit ADC) into the 16-bit core, allowing engineers to leverage existing PIC18 firmware libraries while gaining higher throughput and a wider instruction set. It sits within the broader hierarchy: microcontroller -> embedded MCU -> semiconductor. Key features include 256 bytes of EEPROM data memory, 3x 16-bit timers, 2x analog comparators with selectable reference, 1x UART, 1x I2C, 1x SPI, and ultra-low-power sleep modes (deep sleep current typically below 100 nA). The nanoWatt XLP technology delivers active current around 8 uA/MHz, enabling years of battery life in always-on edge devices. Architecture-wise, the device uses a modified Harvard bus with separate program and data paths, hardware multiply, and a deterministic interrupt controller. The 32MHz internal oscillator eliminates the need for an external crystal in many cost-optimized designs, while a 4x PLL is selectable for higher instruction throughput. Typical applications include low-cost IoT sensor nodes, battery-powered consumer devices, white goods and small home appliances, HVAC accessories, metering peripherals, and PIC18 migration designs. Designers choose this part when 8-bit PIC18 performance is insufficient but full PIC24EP cost is not required. A key design tip is to use the 32MHz internal Fast RC oscillator with the PLL to save BOM cost, and to leverage the deep-sleep watchdog and RTCC for sub-microamp sleep profiles. Carefully review the configuration bits in the IDE to enable the correct oscillator mode before code generation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KL401-E/P

PIC24F08KL401-E/P - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24F08KL401-E/P is a 16-bit PIC24F microcontroller with nanoWatt XLP eXtreme Low Power technology, featuring an 8KB Flash program memory and a 32MHz maximum CPU speed, housed in a 20-pin PDIP (0.300", 7.62mm) through-hole package. It integrates 1KB RAM, 512 bytes EEPROM, a 10-bit ADC, and PIC18-compatible peripherals such as MSSP (I2C/SPI) and CCP/ECCP, enabling easy migration from PIC18 designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC24F08KL401 belongs to the PIC24F family, a 16-bit modified Harvard architecture family that sits between the 8-bit PIC18 and the 32-bit PIC32 in Microchip's portfolio. It targets cost-sensitive embedded designs that need 16-bit performance, low power consumption, and easy migration from existing PIC18 firmware while staying below the price point of dsPIC or PIC32 devices. Key features include up to 32 MIPS performance from a 32MHz internal oscillator, the nanoWatt XLP power management unit with deep-sleep currents down to the sub-microamp range, and 25 MIPS sustained throughput at 3.3V. The 20-PDIP package offers wide prototyping-friendly pitch for breadboards and through-hole assembly, while industrial-grade -40C to +125C operation supports harsh-environment deployments. Architecturally, the PIC24F08KL401 uses a 16-bit modified Harvard core with a separate 24-bit instruction word and 16-bit data path. The MSSP peripheral supports both I2C and SPI on the same pins, while CCP/ECCP modules provide flexible PWM, capture, and compare functions. Hardware CRC, idle/sleep/doze modes, and brown-out reset (BOR) further enhance robustness in field-deployed embedded nodes. Typical applications include consumer electronics, industrial sensor nodes, low-power IoT endpoints, battery-powered HVAC controls, and white-goods motor control. The combination of XLP sleep currents, integrated ADC, and PIC18-compatible peripherals makes it especially attractive for retrofit designs and energy-harvesting devices. When designing with this MCU, ensure decoupling capacitors of 0.1uF and 10uF are placed near VDD/VSS pins, configure the CONFIG registers for the desired oscillator source during firmware initialization, and consult the family reference manual for the most recent silicon errata. Selecting the right ICSP programming header footprint preserves in-circuit debug capability across product revisions. This page synthesizes distributor pricing, drop-in package alternatives from the PIC24F and PIC24FJ families, and practical design considerations not found in the manufacturer datasheet, giving procurement and engineering teams a single reference for evaluation.

見積もりお問い合わせ

PIC24F08KL401-E/SO

PIC24F08KL401-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24F08KL401-E/SO is a 16-bit PIC® XLP™ 24F microcontroller featuring 8KB Flash program memory, 1KB RAM, and 512B EEPROM in a 20-pin SOIC package. It operates at up to 32MHz from a 1.8V to 3.6V supply, integrating a 12-bit 10-channel ADC, multiple timers, MSSP (I2C/SPI), CCP/ECCP, comparators, PWM, and nanoWatt XLP™ extreme low-power technology for battery-driven designs. An MCU (Microcontroller Unit) is a single-chip computer containing a CPU core, non-volatile program memory, volatile data memory, and configurable peripheral IP. Within the broader taxonomy, the PIC24F family sits between 8-bit PIC18/AVR MCUs and 32-bit ARM Cortex-M parts, offering 16-bit instruction efficiency at low cost. The KLx family specifically targets picoPower / nanoWatt XLP applications, extending the line of PIC18 peripherals (MSSP, CCP/ECCP) onto the 16-bit core for code-compatible migration. Key features include 8KB self-programmable Flash (2.75K x 24 instruction words), 1KB SRAM, 512B EEPROM, 12-bit ADC with up to 10 channels, dual comparators with selectable reference, three 16-bit timers, a 16-bit PWM, an RTCC, and full-speed USB-free serial peripherals. Brown-out Reset (BOR), High/Low-Voltage Detect (HLVD), Power-on Reset (POR), and Windowed Watchdog Timer (WDT) are integrated for automotive-grade reliability. The -E suffix denotes the -40C to +125C extended operating temperature range for industrial use. Architecturally, the device uses a modified Harvard bus with separate program and data paths, a 16-bit native datapath, and hardware multiply/divide. nanoWatt XLP technology enables deep sleep currents below 1 µA (typical), making the part suited for always-on battery applications. The 20-SOIC (wide-body) footprint eases hand-soldering and probe-friendly bench development. Typical applications include low-cost industrial sensor nodes, battery-powered instrumentation, consumer appliance controllers, LED lighting controllers, and portable medical accessories. Designers migrating from PIC18F to 16-bit PIC24F benefit from shared peripheral libraries and pin-compatible footprints within the KLx family. Design consideration: at 32MHz core from 3.3V, decoupling must include 100nF + 10µF bulk near VDD/AVDD pins; ensure MCLR has proper pull-up for BOR-correct startup. The extended temperature grade -E supports industrial but is not AEC-Q100 qualified - select PIC24F automotive parts for vehicle applications. This page synthesizes distributor pricing, 20-SOIC drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC24F08KL401-E/SS

PIC24F08KL401-E/SS - 16-bit MCU 8KB Flash 32MHz SSOP-20

The Microchip Technology PIC24F08KL401-E/SS is a 16-bit Flash microcontroller based on the nanoWatt XLP eXtreme Low Power PIC24F core, delivering 32 MHz / 16 MIPS performance with 8 KB Flash, 1 KB RAM and 512 bytes of EEPROM in a 20-pin SSOP (5.30 mm) package. The part belongs to the PIC24F KL family of low-cost, low-power general-purpose microcontrollers and is offered in the -E (Extended) -40C to +125C temperature grade. A 16-bit microcontroller (MCU) is a single-chip computer that combines a 16-bit CPU core, program memory (Flash), data memory (SRAM), non-volatile EEPROM, and a rich set of on-chip peripherals. Within the broader semiconductor taxonomy, the PIC24F KL family sits between 8-bit PIC MCUs and 32-bit PIC32 devices, offering higher code density and faster arithmetic than 8-bit parts while retaining the ease-of-migration and PIC18-compatible peripherals (MSSP, CCP/ECCP) that simplify the transition from legacy designs. Key features of the PIC24F08KL401 include 12 channels of 10-bit ADC, three 16-bit timers, an MSSP supporting both I2C and SPI, an Enhanced CCP module, a 5-bit DAC reference, two analog comparators, and the nanoWatt XLP ultra-low-power sleep modes that allow deep-sleep currents below 1 A. The 1.8 V to 3.6 V supply range and integrated CTMU make the device suitable for capacitive touch and battery-powered applications. Architecturally, the part uses a modified Harvard bus with a 16-bit data path and 24-bit instruction word, achieving 16 MIPS at 32 MHz. Peripheral pin select is limited compared with larger PIC24F devices, but the PIC18-compatible peripheral set keeps the footprint familiar for engineers migrating from PIC16F/PIC18F designs. Typical applications include consumer remote controls, low-cost sensor nodes, battery-powered IoT endpoints, LED lighting controllers, capacitive touch user interfaces, home appliances, and white goods. The KL family is purpose-built for cost-sensitive designs that need 16-bit performance without the bill of materials cost of larger PIC24F or PIC32 devices. When designing with the PIC24F08KL401, plan oscillator start-up timing and verify minimum VDD rise rates for reliable Flash programming; bulk-decouple VDD with a 100 nF ceramic plus a 4.7 uF bulk cap placed within 3 mm of the supply pin. Use MPLAB X IDE with the XC16 compiler for software development, and refer to the device family data sheet for parametric curves and migration notes. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24F08KL/KA family, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC24F08KL401-I/P

PIC24F08KL401-I/P - 16-bit 32MHz 8KB Flash MCU | Microchip DIP-20

The Microchip Technology PIC24F08KL401-I/P is a 16-bit, 32 MHz flash microcontroller with 8 KB program memory, 1 KB SRAM, and a 10-bit ADC, housed in a 20-pin PDIP (DIP-20) package. It belongs to the PIC24F KL4 family and integrates nanoWatt XLP eXtreme Low-Power technology, peripheral select, and the same peripheral set as the PIC18 architecture for flexible migration from 8-bit designs. The part is specified for the industrial temperature range (-40C to +85C) and operates from 1.8 V to 3.6 V. A PIC microcontroller (MCU) is a compact programmable processor that integrates CPU, Flash program memory, SRAM data memory, and peripherals such as timers, ADCs, and communication interfaces into a single silicon die. Within the broader taxonomy, PIC24F devices are 16-bit modified Harvard microcontrollers that sit between 8-bit PIC18 parts and 32-bit PIC32MM devices, and they belong to the wider class of embedded microcontrollers, semiconductors, and integrated circuits used for real-time control. The KL4 sub-family adds dedicated low-power peripherals (RTCC, deep sleep, ultra-low-power wake-up) to support battery-powered designs. Key features of the PIC24F08KL401 include: 8 KB self-programmable flash with program flash visibility, 1 KB SRAM, 512 bytes of EEPROM-like data EEPROM emulation, a 10-bit A/D converter with up to 12 channels, an analog comparator, a Charge Time Measurement Unit (CTMU), and an RTCC. Communication peripherals include MSSP supporting both I2C and SPI, plus a UART with LIN support and IrDA. Capture/Compare/PWM modules include CCP and Enhanced CCP (ECCP) for motor-control PWM. The KL4 family also features Peripheral Pin Select (PPS) for flexible signal routing. Typical applications include cost-sensitive consumer electronics, low-power battery-powered sensor nodes, home appliances and white goods, LED lighting controllers, small motor-control subsystems, and industrial control boards that require 16-bit performance at 8-bit cost. Designers migrating from PIC18F benefit from code and peripheral compatibility while gaining 16-bit arithmetic and DSP-friendly instruction set features. The 32 MHz operation delivers up to 16 MIPS, sufficient for simple closed-loop control and signal processing. When designing with the PIC24F08KL401-I/P, ensure the chosen debug tool supports the device ID (such as PICkit 3/4, MPLAB ICD 4, or MPLAB Snap). Configure unused pins as digital outputs and disable unused peripherals in firmware to achieve nanoWatt XLP sleep currents in the sub-microamp range. This page synthesizes distributor pricing, drop-in package alternatives, and design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KL401-I/SS

PIC24F08KL401-I/SS - 8KB Flash 16-bit MCU, 32MHz | Microchip

The Microchip PIC24F08KL401-I/SS is a cost-effective 16-bit Flash microcontroller from the PIC24F XLP family featuring nanoWatt XLP technology for eXtreme Low Power consumption, housed in a 20-pin SSOP (5.30 mm body width) package. It integrates 8 KB of self-programmable Flash program memory (2.75 K x 24), 1 KB SRAM, and 16-byte data EEPROM, while operating at up to 32 MHz MIPS performance from a 1.8 V to 3.6 V supply. Peripherals include a 10-bit ADC with up to 12 channels, MSSP (I2C/SPI), two UART modules, CCP/ECCP, and up to 17 I/O pins with interrupt-on-change capability. The -I suffix indicates the -40C to +85C industrial operating temperature grade. A microcontroller (MCU) is an integrated computer-on-a-chip containing a processor core, program and data memory, and configurable peripherals such as ADCs, timers, and communication interfaces. Within the embedded hierarchy, MCUs sit below microprocessors (which require external memory) and above discrete logic; the 16-bit class offers a balance between 8-bit simplicity and 32-bit performance. The PIC24F family specifically targets ultra-low-power applications through nanoWatt XLP technology, which provides sleep currents in the nanoamp range and multiple power-saving modes, making it well-suited for battery-powered products where standby drain dominates battery life. Key features include eXtreme Low Power (XLP) technology, a 17-channel 10-bit ADC with internal bandgap reference, two analog comparators, a 5-bit DAC, and an 8-bit Parallel Master Port on selected variants. The device includes a 16-bit Timer, three 16-bit Timer/Counters, and a Real-Time Clock Calendar (RTCC) module. The integrated peripherals echo PIC18 simplicity to ease migration from older 8-bit designs. The PIC24F08KL401 is built on a Harvard architecture with a 16-bit modified RISC CPU using a 24-bit instruction word. Its deterministic interrupt latency, byte-addressable peripheral registers, and rich peripheral set make it appropriate for cost-sensitive real-time control without sacrificing code density. Brown-out Reset, Watchdog Timer, and Power-on Reset are integrated for system robustness. Typical applications include IoT sensor endpoints, battery-powered sensor nodes, low-power remote controls, appliance user interfaces, and small consumer electronics. Its wide operating voltage range suits 2x AA / coin-cell powered designs where efficiency across the discharge curve is critical. When designing with this MCU, plan the oscillator and decoupling network first; place a 0.1uF decoupling capacitor close to VDD with a bulk 1uF on the same rail. Note that the -I grade limits junction temperatures to -40C to +85C ambient; the -E grade extends this to +125C for harsher environments. This page synthesizes distributor pricing, drop-in SSOP-20 alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KL401T-I/SO

PIC24F08KL401T-I/SO - 16-bit 32MHz MCU, 8KB Flash, 20-SOIC | Microchip

The Microchip Technology PIC24F08KL401T-I/SO is a 16-bit microcontroller from the PIC24F KL401 family, delivering 32 MIPS performance at 32 MHz while consuming nanoWatt XLP eXtreme Low Power for battery-friendly designs. The device integrates 8 KB of Flash program memory (2.75K x 24 words), 1 KB of SRAM, and a 10-bit ADC, all housed in a 20-pin SOIC (7.50 mm body width) package. It operates from a 1.8V to 3.6V supply with 17 available I/O pins for mixed-signal interfacing. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on 16-bit data paths in a single cycle, delivering roughly 2x the throughput of an 8-bit MCU while remaining power-efficient for cost-sensitive applications. The PIC24F family occupies the middle tier of Microchip's portfolio, sitting between the PIC18 (8-bit) and dsPIC33 (DSP-enhanced 16-bit) families and inheriting familiar PIC18 peripherals such as MSSP for I2C/SPI and CCP/ECCP for PWM, which simplifies migration from older 8-bit designs. Key features of the PIC24F08KL401T-I/SO include the nanoWatt XLP technology suite (Deep Sleep, Doze, Idle modes), 17 GPIO, 10-bit ADC with internal reference support, MSSP (I2C/SPI), a configurable ECCP/PWM module, and a 32 kHz RTCC timer. The part is AEC-Q100 friendly with an industrial operating range of -40 C to +85 C and supports in-circuit serial programming (ICSP) via the MPLAB Snap or PICkit 4 debuggers. Architecture-wise, the PIC24F08KL401T-I/SO uses a modified Harvard core with a 24-bit instruction word and 16-bit data path. This dual-bus architecture allows simultaneous fetch and access, while XLP modes drop quiescent current into the microamp range, suiting always-on sensors. Typical applications include low-cost IoT sensor nodes, battery-powered consumer devices, USB-less human-interface controllers, small industrial control boards, and HVAC monitoring front ends. The wide 1.8V-3.6V range simplifies designs powered by 2x AA cells or single-cell Li-ion. Design consideration: route an external 32.768 kHz crystal only if you need a real-time clock; otherwise use the internal LF oscillator to save two GPIOs and BOM cost. The MSSP, ADC, and I/O map must be checked against your PCB layout because some analog channels share pins with digital functions. This page synthesizes distributor pricing, drop-in SOIC-20 alternatives from the PIC24F KL/ KA family, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KL402-E/ML

PIC24F08KL402-E/ML - 16-bit 32MHz MCU, 8KB Flash, 28-QFN | Microchip

The Microchip PIC24F08KL402-E/ML is a 16-bit PIC24F microcontroller with 8KB Flash, 1KB RAM, and 512B EEPROM in a 28-pin QFN (6x6 mm) package, operating at up to 32 MHz (16 MIPS). Designed around the nanoWatt XLP eXtreme Low Power technology platform, it targets cost-sensitive, low-power embedded applications across consumer, industrial, and IoT segments. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU, memory (Flash for program code, RAM for data, EEPROM for non-volatile storage), and peripherals on one die. A 16-bit MCU like the PIC24F processes data 16 bits at a time, sitting between 8-bit MCUs (PIC10/12/16/18) and 32-bit MCUs (PIC32, ARM Cortex-M) in both price and performance. The PIC24F family is optimized for low power consumption while delivering computational headroom above 8-bit parts. Key features of the PIC24F08KL402 include nanoWatt XLP technology for sleep currents in the nanoampere range, 12-channel 10-bit ADC for sensor acquisition, dual op-amps and comparators for analog signal conditioning, plus MSSP (I2C/SPI) and CCP/ECCP peripherals borrowed from the PIC18 family to ease migration. The 28-QFN package with exposed thermal pad offers a compact 6x6 mm footprint suitable for space-constrained designs. Technically, the part runs from a wide 1.8V to 3.6V supply, supports up to 16 MIPS throughput, and provides multiple low-power modes (Sleep, Deep Sleep, Retention) controlled via the on-chip RTCC and deep-draw hardware. The peripheral set is intentionally minimalist but flexible, allowing developers to scale functionality without jumping to larger flash densities. Typical applications include battery-powered sensor nodes, wearable health monitors, consumer remote controls, home automation endpoints, and low-cost industrial control front-ends. Its combination of PIC18-compatible peripherals with PIC24-class CPU throughput makes it well suited as a migration target from 8-bit designs that have outgrown their original MCU. When designing with this part, plan pin assignments carefully since the 28-QFN variant has fewer I/O pins than 28-SOIC/SPDIP equivalents - verify your I/O budget against the datasheet pin table before committing to the PCB layout.

見積もりお問い合わせ

PIC24F08KL402-E/SO

PIC24F08KL402-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24F08KL402-E/SO is a cost-optimized 16-bit PIC microcontroller featuring the eXtreme Low Power (XLP) nanoWatt technology, 8KB of Flash program memory, 1KB of SRAM, and 512B of EEPROM in a 28-pin SOIC package. It integrates a 32MHz PIC24F core with peripheral blocks inherited from the PIC18 family (MSSP for I2C/SPI and CCP/ECCP), enabling easy migration from legacy 8-bit designs. Operating voltage spans 1.8V to 3.6V with AEC-Q100 automotive qualification per the manufacturer's extended temperature (-40C to +125C) marking. A 16-bit microcontroller is a single-chip computer that fetches, decodes, and executes instructions with a 16-bit wide datapath, offering a meaningful step up in code density, arithmetic precision, and peripheral throughput over traditional 8-bit MCUs while remaining lower cost and lower power than 32-bit Cortex-M parts. PIC24F devices sit in Microchip's mid-range 16-bit portfolio, positioned between the legacy PIC18 and the dsPIC/PIC32 lines, and target cost-sensitive applications that benefit from a real C-programmable core with on-chip analog and communication peripherals. Key features of the PIC24F08KL402 include up to 32 MIPS core throughput at 32MHz, configurable 8-channel 10-bit ADC, two analog comparators, two UART/SPI/I2C-capable MSSP ports, up to 25 mA source/sink I/O, and nanoWatt XLP sleep currents below 1 uA in deep-sleep retention mode. The 28-SOIC package is footprint-compatible with the PIC24F08KL302 and PIC24F08KL201 families, allowing board reuse across the KL series. The device uses a Harvard architecture with separate program and data buses, a hardware multiply/divide unit, and a 16-element register file. Code and data are protected by separate Flash and Memory spaces for security, and the integrated ICSP (In-Circuit Serial Programming) interface allows in-field firmware updates without bootloader overhead. Typical applications include cost-sensitive 16-bit embedded controls such as home appliances, sensor signal conditioning, low-power IoT sensor nodes, HVAC actuator controllers, and AEC-Q100 automotive body modules. The combination of nanoWatt XLP, MSSP, and 10-bit ADC enables direct battery-powered operation with minimal external components. Design tip: leverage the MSSP peripheral in either SPI or I2C mode to offload bit-banged communication from the CPU, freeing bandwidth for the 10-bit ADC scan loop. For noise immunity in automotive environments, place the VCAP decoupling capacitor within 3mm of the VCAP pin and keep ADC traces short and guarded. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the KL/KA families, and practical design notes not found on the manufacturer product page.

見積もりお問い合わせ

PIC24F08KL402-E/SP

PIC24F08KL402-E/SP - 16-bit XLP MCU 8KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC24F08KL402-E/SP is a 16-bit PIC microcontroller with nanoWatt XLP eXtreme Low Power technology, featuring 8KB of Flash program memory (2.75K x 24 instruction words), 1KB RAM, and 512 bytes of EEPROM in a 28-pin SPDIP through-hole package. It runs at up to 32 MHz delivering 16 MIPS, integrates a 12-channel 10-bit ADC, and provides flexible peripherals including MSSP (I2C/SPI), CCP/ECCP, and multiple timers. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU, program memory, RAM, and peripherals on a single die. The PIC24F family uses a modified Harvard architecture with 16-bit wide instructions and data paths, offering a balance between the simplicity of 8-bit PIC MCUs and the performance of 32-bit devices. Within the broader taxonomy: microcontroller -> 16-bit MCU -> PIC24F family -> PIC24F08KLx series -> low-power (XLP) variant. This part targets cost-sensitive applications where 16-bit performance is needed without 32-bit complexity. Key features include extreme low-power operation with nanoWatt XLP sleep currents, a 32 MHz internal oscillator, 23 digital I/O pins with interrupt-on-change capability, and 12 channels of 10-bit analog-to-digital conversion at 500 ksps. The device operates from 1.8V to 3.6V with on-chip voltage regulation, supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD), and offers multiple communication interfaces including I2C, SPI, and UART. The PIC24F08KL402-E/SP uses a 16-bit RISC-style core with single-cycle multiply and hardware divide, providing deterministic interrupt latency for real-time control. Its nanoWatt XLP technology enables sleep currents below 1 uA, making it suitable for battery-powered sensor nodes, wearable electronics, and remote monitoring equipment where idle power dominates total energy consumption. Typical applications include IoT sensor nodes, low-power wireless devices, portable medical instruments, consumer electronics with battery backup, industrial sensor interfaces, and home automation controllers. The wide -40C to +125C operating range also supports industrial and outdoor deployments requiring extended temperature tolerance. When designing with this part, allocate careful attention to the ICSP programming header placement to avoid interference with debug access. The MSSP peripheral requires careful I2C pull-up resistor sizing and timing-budget analysis for multi-master or long-bus configurations. This page synthesizes verified distributor pricing, drop-in alternatives from the same KL family, and practical design notes that complement the manufacturer datasheet to help engineers select and qualify this part with confidence.

見積もりお問い合わせ

PIC24F08KL402-I/ML

PIC24F08KL402-I/ML - 16-bit MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24F08KL402-I/ML is a 16-bit Flash microcontroller from the PIC24F KL402 family, featuring nanoWatt XLP technology for eXtreme Low Power consumption. It integrates 8 KB of Flash program memory, 1 KB of SRAM, and a 512-byte data EEPROM, runs at 32 MHz CPU clock speed, and operates from a 3.0 V to 3.6 V supply. Housed in a 28-pin VQFN (6x6 mm) package with exposed thermal pad (ML suffix), this device is qualified for the industrial temperature range (-40C to +85C) and targets cost-sensitive 16-bit embedded designs that previously used PIC18 architectures. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals such as timers, communication interfaces and analog blocks. The PIC24F family sits at the low-power, low-cost end of Microchip's 16-bit MCU portfolio, sitting below dsPIC and PIC24EP parts in performance hierarchy. Compared with 8-bit PIC MCUs, PIC24F devices offer 16-bit data paths, higher MIPS per MHz and richer peripherals, while keeping the same MPLAB X IDE and XC16 toolchain compatibility. The KL402 sub-family further adds nanoWatt XLP sleep modes that drop current into the nanoampere range for battery-powered designs. Key features include 17 general-purpose I/O pins, a 10-bit ADC with multiple channels, two UART modules, MSSP (I2C/SPI), CCP/ECCP capture/compare/PWM peripherals, and 5 timer modules. The 10-bit ADC supports up to 12 input channels with automatic sampling. Real-time clock, hardware CRC and a charge time measurement unit (CTMU) for capacitive touch round out the on-chip peripheral set. The device also integrates a 32 kHz low-power oscillator and supports multiple low-power sleep modes including Sleep, Idle and Doze. The PIC24F08KL402 uses a modified Harvard architecture with a 16-bit datapath and 24-bit instruction word, achieving 16 MIPS at 32 MHz. The CIP (Core Independent Peripherals) concept allows peripherals to operate without CPU intervention, reducing firmware complexity and active-time power. The CTMU enables mTouch capacitive touch sensing without an external charge pump, while the MSSP peripheral supports both I2C and SPI masters/slaves, simplifying sensor and display integration. Typical applications include low-power IoT sensor nodes, consumer white goods, home automation, battery-powered handheld instruments, LED lighting control, and cost-sensitive industrial controls. The combination of XLP sleep currents under 100 nA and the 32 MHz performance makes it well suited for products that spend most of their life in sleep but wake periodically to perform measurement or communication tasks. When designing with this part, plan the layout to keep the exposed thermal pad (EP) soldered to the ground plane for mechanical strength and thermal relief. Use MPLAB X IDE with the XC16 compiler for firmware development, and consider the free MPLAB Code Configurator (MCC) plug-in to generate peripheral init code. Decouple VDD/VSS with a 100 nF ceramic capacitor close to each power pin pair as called out in the datasheet. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single reference for part selection, sourcing and PCB layout.

見積もりお問い合わせ

PIC24F08KL402-I/SP

PIC24F08KL402-I/SP - 16-bit 32MHz MCU 8KB Flash 28-SPDIP | Microchip

The Microchip Technology PIC24F08KL402-I/SP is a 16-bit microcontroller from the PIC24F KL family featuring 8 KB of Flash program memory, 1 KB of SRAM, and 512 bytes of EEPROM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It operates at up to 32 MHz instruction-cycle speed, integrates a 10-bit ADC with up to 12 channels, and runs from a 1.8 V to 3.6 V supply. The /SP suffix denotes the 28-pin SPDIP industrial-temperature package rated from -40 °C to +85 °C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC24F uses Microchip's 16-bit modified-Harvard architecture with a 16-bit-wide instruction path and a 24-bit-wide instruction word, delivering roughly 2x to 5x the throughput of PIC18 8-bit parts at the same clock while remaining C-friendly. The KL402 sits at the entry level of the KL4 sub-family, designed as a cost-optimized migration path from PIC18 designs thanks to compatible peripherals such as MSSP (I²C/SPI), CCP/ECCP, and the same core register model. Key features of the PIC24F08KL402 include nanoWatt XLP technology for eXtreme Low Power consumption (deep-sleep currents in the nanoamp range), four 16-bit timers, two UART modules, one I²C/SPI MSSP, up to 25 mA source/sink per I/O, and a 10-bit 1.1 Msps ADC. The device supports In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via two standard pins, enabling field firmware updates and low-cost development. A wide operating range of 1.8 V to 3.6 V allows direct connection to single-cell Li-ion, two-AA, or 3.3 V regulated rails. Architecturally, the KL4 core uses a single-cycle hardware multiply, a 17-bit × 17-bit MAC for DSP-style operations, and a 16-element working register array. The MSSP block reuses the familiar PIC18 SPI/I²C controller, easing code porting. The 10-bit successive-approximation ADC has a dedicated FRC oscillator and supports automatic Channel Scan and Buffer Mode. Internal oscillators are accurate to within ±2 % across temperature, eliminating the need for an external crystal in most designs. Typical applications for the PIC24F08KL402-I/SP include low-power IoT sensor nodes, battery-powered consumer devices, low-cost motor-control loops (small DC and stepper), home appliances, e-metering accessories, USB-to-UART bridges (when paired with an external transceiver), and industrial control user-interface panels. The 28-SPDIP package is especially favored for prototype breadboarding, hobbyist designs, and through-hole production assemblies where socketed replacement or hand rework is required. When designing with this MCU, note that the 28-SPDIP variant exposes 25 general-purpose I/O. For surface-mount or smaller-footprint designs, Microchip offers the same silicon in PIC24F08KL402-I/SS (28-SSOP), PIC24F08KL402-I/SO (28-SOIC), and PIC24F08KL402-I/ML (28-QFN) packages. The 'I' industrial temperature grade is the right choice for -40 °C to +85 °C environments; switch to the 'E' extended grade for -40 °C to +125 °C automotive or industrial high-temperature applications. This page synthesizes distributor pricing, verified drop-in alternatives, and practical engineering design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a faster path to qualification.

見積もりお問い合わせ

PIC24F08KM101-E/P

PIC24F08KM101-E/P - 16-bit MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24F08KM101-E/P is a 16-bit PIC XLP 24F microcontroller with 8KB Flash, 1KB RAM, and 512B EEPROM, housed in a 20-pin PDIP package rated for the -40C to +125C industrial temperature range. The device runs at up to 32MHz core clock from a 1.8V-3.6V supply and integrates a 12-bit ADC with up to 16 input channels, dual comparators, configurable logic cells, and CCP/PWM modules. It belongs to the nanoWatt XLP family, which targets extreme low-power applications where active current and sleep current both matter. What is a PIC24F microcontroller? A PIC24F is a 16-bit RISC microcontroller in the Microchip PIC24 family, sitting between the 8-bit PIC16/PIC18 line and the 32-bit PIC32 line in Microchip's portfolio. It uses a modified Harvard architecture with a 16-bit data path, runs most instructions in one cycle, and is aimed at low-power embedded designs that need more headroom than 8-bit parts but not the full performance of a 32-bit core. PIC24F derivatives add Microchip's eXtreme Low Power (XLP) technology with deep-sleep currents below 1 uA, making them common in battery and energy-harvesting designs. The PIC24F08KM101-E/P offers three differentiating features for its class: 8KB self-programmable Flash with configurable write protection, a 12-bit ADC with integrated 1.024V bandgap reference for ratiometric measurements, and MCCP/SCCP timer modules supporting Capture, Compare, and PWM modes. Its nanoWatt XLP idle and sleep modes drop quiescent current into the microamp range, while the integrated op-amp and dual comparators let designers replace several external analog components. Real-Time Clock/Calendar hardware with separate 32kHz oscillator domain is also supported, enabling accurate time-of-day tracking without an external RTC IC. The architecture is built around a 16-bit modified Harvard core with a 3-stage pipeline, single-cycle multiply, and bit-manipulation instructions inherited from the PIC18 instruction set. Peripherals are mapped via a Peripheral Pin Select (PPS) system on PPS-capable pins, which simplifies PCB routing by remapping digital functions to alternate physical pins. The bus matrix routes 16-bit data and 24-bit instructions in parallel, giving deterministic interrupt latency critical for motor and power-control loops. Typical applications for the PIC24F08KM101-E/P include battery-powered sensor nodes, low-cost consumer appliances, industrial control panels, HVAC controllers, and small motor-control boards. Its DIP-20 package and breadboard-friendly form factor also make it a frequent choice for prototyping, hobby projects, and educational platforms. With 12-bit ADC resolution it can read thermistors, photodiodes, and strain gauges without an external signal conditioner. When designing with the PIC24F08KM101-E/P, plan the analog and digital ground topology - the device mixes a 12-bit ADC with switching I/O, and poor grounding will eat into that resolution. Use a ferrite bead or pi-filter on the analog AVdd pin to isolate ADC supply noise from digital Vdd, and add a 100nF ceramic decoupling cap within 5mm of each Vdd pin. The PPS system requires unlocking the IOLOCK register after programming, so account for that in your firmware bring-up sequence. This page synthesizes verified distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC24F08KM101-E/SS

PIC24F08KM101-E/SS - 16-bit XLP MCU 8KB Flash 20-SSOP | Microchip

The Microchip Technology PIC24F08KM101-E/SS is a 16-bit PIC® XLP™ 24F microcontroller featuring 8KB of Flash program memory (2.75K x 24 words), 1KB of RAM and 512 bytes of EEPROM, operating at up to 32MHz from a 1.8V to 5.5V supply. It is housed in a 20-pin SSOP (SS) package and integrates a 12-bit ADC, a 10-bit DAC, comparators, op-amps and configurable logic cells that suit compact analog-front-end designs. A low-power microcontroller (MCU) is a programmable processing device with on-chip memory and peripherals that targets battery- and energy-constrained products. Within the broader taxonomy, the PIC24F08KM101 belongs to the 16-bit MCU family -> microcontroller -> embedded processor -> semiconductor IC category. The "XLP" (eXtreme Low Power) designation indicates nanoWatt technology for sleep currents down to the sub-microamp range, enabling years of operation on a single coin cell. Key features of the PIC24F08KM101 include eXtreme Low Power nanoWatt technology, 12-bit A/D with up to 9 input channels, a 10-bit DAC, three op-amps, two comparators, configurable logic cells, MCCP/SCCP capture/compare/PWM modules, and serial peripherals including I2C, SPI, UART and IrDA. The device runs from 1.8V to 5.5V and supports both 3V and 5V system rails. Architecturally, the PIC24F08KM101 uses a 16-bit modified Harvard core with separate program and data buses, allowing single-cycle instruction fetch with simultaneous data access. The integrated op-amps and comparators reduce external analog component count, while the Configurable Logic Cell (CLC) lets designers implement custom glue-logic functions without discrete gates. Typical applications include portable medical sensors, e-metering and smart energy nodes, capacitive-touch user interfaces, IoT edge sensor hubs, automotive body and sensor nodes (LIN bus), and small industrial control boards where low power, integrated analog, and a compact 20-pin footprint are all required simultaneously. When designing with the PIC24F08KM101, confirm that the chosen ADC reference, op-amp gain settings, and PWM frequency all align with the 32MHz system clock budget. The 20-SSOP package gives a 5.30mm body width, ideal for dense hand-held PCBs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC24F08KM101-I/P

PIC24F08KM101-I/P - 16-bit 32MHz 8KB Flash MCU 20-PDIP | Microchip

The Microchip Technology PIC24F08KM101-I/P is a 16-bit microcontroller from the PIC24F KM family, featuring 32 MHz CPU speed, 8 KB of Flash program memory, 1 KB of RAM, and packaged in a 20-pin PDIP through-hole form factor. The PIC24F KM family integrates a 12-bit ADC, DAC, and operational amplifiers, and supports both 3V and 5V application rails with operating voltages from 1.8 V to 5.5 V (the PIC24FV suffix variants support 2.0 V to 5.5 V). This low pin-count device is engineered for low-cost, low-power embedded applications and is built on the nanoWatt eXtreme Low Power (XLP) platform, which delivers deep-sleep currents measured in nanoamperes, making it suitable for battery-powered products that must run for years on a single cell. A PIC microcontroller (MCU) is a compact single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. PIC24F devices use a 16-bit modified Harvard architecture with a multi-stage pipeline, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/CE families in Microchip's portfolio. The '24F' suffix denotes the family tier and Flash-based program memory, and the KM subfamily specifically targets low-power, analog-rich, low pin-count applications with integrated operational amplifiers that can be used as signal conditioning front-ends before the ADC. Key features of the PIC24F08KM101-I/P include flexible Capture/Compare/PWM (CCP) modules for motor control or timing, a Configurable Logic Cell (CLC) that allows users to build custom digital peripherals from on-chip signals, an integrated 12-bit ADC with sample-and-hold, and on-chip op-amps and a DAC for analog signal chains. The device also includes multiple communication peripherals, watchdog timers, and an in-circuit serial programming (ICSP) port that allows Flash programming without removing the chip from the board. Typical applications for this part include industrial sensor nodes, low-power IoT endpoints, battery-powered handheld instruments, home appliances, white goods control boards, and small motor or fan control modules. The wide 1.8 V to 5.5 V supply range makes it especially attractive for products powered directly from a single lithium cell, two AA cells, or a regulated 3.3 V / 5 V rail, while the integrated op-amps simplify transducer-bridge designs such as temperature, pressure, or strain-gauge signal conditioning. When designing with this device, confirm the desired operating voltage range matches the KM (1.8 V–5.5 V) variant rather than the PIC24FV (2.0 V–5.5 V) variant. Use low-ESR decoupling capacitors on VDD/AVDD and place them within a few millimetres of the pins. For low-power sleep-mode designs, follow the nanoWatt XLP guidance in the datasheet to achieve the published deep-sleep currents, paying close attention to which peripherals are clocked during sleep. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

PIC24F08KM101-I/SO

PIC24F08KM101-I/SO - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

The Microchip Technology PIC24F08KM101-I/SO is a 16-bit PIC24F microcontroller from the nanoWatt XLP eXtreme Low Power family, offering 8KB of Flash program storage and 1KB of RAM in a 20-pin SOIC package. Operating at up to 32 MHz with 16 MIPS instruction throughput, it delivers efficient 16-bit performance while drawing very little active and sleep current, making it suitable for battery-powered and energy-harvesting applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals into one IC. The PIC24F family uses a 16-bit modified Harvard architecture optimized for deterministic real-time control. Within the broader taxonomy, this device sits at: microcontroller -> 16-bit MCU -> PIC24F -> nanoWatt XLP family. It is designed for low pin count, low power applications that still demand higher performance than 8-bit cores can offer. Key differentiating features include: Configurable Logic Cell (CLC) for hardware state-machine glue logic without software overhead; multiple Capture/Compare/PWM (CCP/OC) modules for motor, lighting, and signal-generation control; a 12-bit A/D converter with up to 12 channels for sensor interfaces; 3V and 5V operating options (PIC24FV variants extend to 2.0V-5.5V); and on-chip temperature indicator, mTouch capacitive touch, and real-time clock/calendar peripherals. The 'I' suffix indicates the industrial -40C to +85C temperature range. Architecturally, the device combines a modified Harvard 16-bit core with peripheral pin select, dual-rail power, and deep-sleep modes drawing only nanoamp-class currents. Compared with 8-bit PIC16F predecessors, the 24F core doubles register width and instruction efficiency, so fewer cycles are needed per task. Typical applications include consumer appliances, sensor signal conditioning, LED lighting control, low-cost motor drivers, portable medical devices, and IoT edge nodes where the XLP nanoWatt sleep profile extends battery life beyond what classic MCUs allow. The wide analog/digital mix reduces external component count. Design consideration: Verify the I/V variant code carefully - PIC24F parts use 1.8-3.6V logic, while PIC24FV parts extend to 5.5V. Mixing these on a 5V rail will damage the F variant. This page synthesizes distributor pricing, drop-in same-package alternatives, AEO-optimized FAQ, and practical design notes that go beyond the manufacturer datasheet, giving engineers actionable intelligence for sourcing and migration decisions.

見積もりお問い合わせ

PIC24F08KM101T-I/SS

PIC24F08KM101T-I/SS - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24F08KM101T-I/SS is a 16-bit microcontroller from the PIC24F KM family, operating at up to 32 MHz with 8 KB (2.75K x 24) of Flash program memory, 1 KB RAM, and 512 bytes of EEPROM, housed in a 20-pin SSOP package. It supports operation from 1.8 V to 5.5 V and integrates dedicated peripherals such as a 12-bit ADC, DAC output, comparators, op amps, and configurable logic cells (CLC), making it a compact mixed-signal MCU. The 'T' suffix indicates tape-and-reel packaging, and the 'I' industrial temperature range covers -40 °C to +85 °C. A 16-bit microcontroller (MCU) is a class of embedded processor with a 16-bit data path, registers, and ALU, positioned between 8-bit MCUs (typical for simple control) and 32-bit MCUs (typical for higher performance and connectivity). The PIC24F belongs to the PIC24F family of low-power 16-bit MCUs from Microchip, and the broader hierarchy is: PIC24F KM series -> PIC24F family -> PIC microcontroller -> 16-bit MCU -> embedded processor -> semiconductor. These MCUs are commonly used for sensor interfacing, low-power IoT edge nodes, battery-powered instrumentation, and human-machine interface (HMI) subsystems. Key features of the PIC24F08KM101T-I/SS include an integrated 12-bit ADC with multiple input channels, multiple Capture/Compare/PWM (MCCP/SCCP) timers, UART, SPI, I2C, and IrDA interfaces, plus an integrated op-amp and DAC for signal conditioning. The part supports Microchip's XLP (eXtreme Low Power) technology, with sleep currents in the microamp range, and it carries the PIC24F KM family hallmarks of small pin-count packages and an integrated analog engine. The device uses a 16-bit modified Harvard architecture with a multi-channel DMA engine, hardware multiplier, and dual-bus architecture for predictable real-time performance. Code execution from Flash at 32 MHz provides 16 MIPS, with a single-cycle instruction fetch and most instructions executing in one or two cycles. The analog subsystem includes a 12-bit ADC with up to 500 ksps throughput, dedicated op-amps usable as gain stages or comparators, and a 5-bit DAC for offset or bias generation, all accessible via dedicated SFR registers. Typical applications include sensor signal conditioning with on-chip op-amps, low-power IoT edge nodes that benefit from XLP sleep modes, battery-powered instrumentation, automotive body and LIN-bus nodes (with the PIC24F08KM101 family), and consumer HMI subsystems that need a small-pin, mixed-signal MCU. The wide 1.8 V to 5.5 V supply range lets the device run from single-cell Li-ion or 3.3 V system rails. When designing, pair this MCU with an MPLAB Snap, PICkit 4, or ICD 4 programmer/debugger over ICSP. The 20-pin SSOP footprint allows hand-soldering and rework, but keep analog traces short and bypass VDD/AVDD with 100 nF and 10 µF capacitors to preserve ADC performance. This page synthesizes distributor pricing, drop-in alternatives in the same 20-SSOP footprint, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

PIC24F08KM102-E/SO

PIC24F08KM102-E/SO - 16-Bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24F08KM102-E/SO is a 16-bit PIC microcontroller from the PIC® XLP™ 24F family, delivering 32 MIPS performance at 32 MHz with 8 KB (2.75K x 24) of Flash program memory, 1 KB RAM, and 512 bytes of EEPROM in a 28-pin SOIC (7.50 mm width) package. It is engineered for low-pin-count, low-power embedded designs with nanoWatt eXtreme Low-Power (XLP) technology supporting both 3V and 5V application rails. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and programmable peripherals. The PIC24F line uses Microchip's modified Harvard 16-bit core with a 16-bit instruction width optimized for deterministic real-time control. It sits in the broader semiconductor hierarchy as: microcontroller -> embedded processor -> integrated circuit, and is widely adopted in industrial and consumer products where predictable interrupt latency and ultra-low standby current are key parameters. The 'KM' subfamily specifically adds Configurable Logic Cell (CLC) blocks and flexible Capture/Compare/PWM modules that target motor-control and signal-routing applications. Key specifications include: 16 MIPS per MHz performance, 19 channels of 10-bit/12-bit selectable ADC, multiple Enhanced CCP/SCCP modules for PWM and capture, hardware comparators, hardware RTCC, and peripheral pin select (PPS) for flexible I/O mapping. The nanoWatt XLP sleep modes draw sub-microamp currents in deep sleep, enabling multi-year battery life on coin cells. The 28-SOIC industrial-grade (-E) variant operates from -40°C to +125°C and supports 1.8V-3.6V core VDD with separate analog and digital I/O rails for noise isolation. The device integrates a hardware crypto engine, USB 2.0 full-speed with on-chip transceiver (PIC24FJ versions), and a configurable logic cell that lets designers implement glue logic without external gates. Process technology is Microchip's low-power CMOS with on-chip voltage scaling to retain state across 1.8V-3.6V. Compared with 8-bit PIC16/PIC18 devices the 16-bit core roughly doubles arithmetic throughput at the same clock, simplifying DSP math for sensor-fusion loops. Typical applications include industrial sensor conditioning, low-power remote keyless entry, smoke and CO detectors, battery-powered IoT nodes, USB peripherals (PIC24FJ variant), motor control driver boards, and portable consumer devices. The wide operating temperature range also suits outdoor and automotive under-hood sensor clusters. The 28-SOIC footprint is convenient for hand-soldering prototypes and for designs that previously used PIC18F 28-pin parts. When designing with this MCU, reserve at least one I/O pin for In-Circuit Serial Programming (ICSP) so firmware updates remain possible in the field. If you do not need USB, choose the PIC24F (non-FJ) variant to avoid USB clocking overhead; if USB is required, select the PIC24FJ derivative. The 1.8V minimum VDD supports direct connection to single-cell Li-ion and primary lithium chemistries without external LDO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the PIC24F08KM102-E/SO that are not collected in the manufacturer datasheet alone.

見積もりお問い合わせ

サブカテゴリ

製品 (32853)

PIC24F08KL302-E/SS - 16-bit 32MHz MCU, 8KB Flash | Microchip

PIC24F08KL302-I/ML - 16-bit MCU, 8KB Flash, 32MHz | Microchip

PIC24F08KL302-I/MQ - 8KB Flash 16-bit MCU | Microchip

PIC24F08KL302-I/SO - 16-Bit XLP MCU 8KB Flash | Microchip

PIC24F08KL302T-I/MQ - 8KB Flash 16-bit MCU 28-QFN | Microchip

PIC24F08KL302T-I/SO - 8KB Flash 16-Bit MCU 32MHz | Microchip

PIC24F08KL302T-I/SS - 16-bit 8KB Flash MCU, 32MHz XLP | Microchip

PIC24F08KL401-E/P - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24F08KL401-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24F08KL401-E/SS - 16-bit MCU 8KB Flash 32MHz SSOP-20

PIC24F08KL401-I/P - 16-bit 32MHz 8KB Flash MCU | Microchip DIP-20

PIC24F08KL401-I/SS - 8KB Flash 16-bit MCU, 32MHz | Microchip

PIC24F08KL401T-I/SO - 16-bit 32MHz MCU, 8KB Flash, 20-SOIC | Microchip

PIC24F08KL402-E/ML - 16-bit 32MHz MCU, 8KB Flash, 28-QFN | Microchip

PIC24F08KL402-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24F08KL402-E/SP - 16-bit XLP MCU 8KB Flash 28-SPDIP | Microchip

PIC24F08KL402-I/ML - 16-bit MCU, 8KB Flash, 32MHz | Microchip

PIC24F08KL402-I/SP - 16-bit 32MHz MCU 8KB Flash 28-SPDIP | Microchip

PIC24F08KM101-E/P - 16-bit MCU, 8KB Flash, 32MHz | Microchip

PIC24F08KM101-E/SS - 16-bit XLP MCU 8KB Flash 20-SSOP | Microchip

PIC24F08KM101-I/P - 16-bit 32MHz 8KB Flash MCU 20-PDIP | Microchip

PIC24F08KM101-I/SO - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

PIC24F08KM101T-I/SS - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24F08KM102-E/SO - 16-Bit 32MHz 8KB Flash MCU | Microchip