集積回路

サブカテゴリ

📁 ADC/DAC 2519 製品 📁 アンプIC 797 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 304 製品 📁 DSP 963 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1586 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18735 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32813)

PIC24FV32KA304-E/MV - 16-bit 32MHz 32KB Flash XLP MCU | Microchip
PIC24FV32KA304-E/MV

PIC24FV32KA304-E/MV - 16-bit 32MHz 32KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FV32KA304-E/MV is a 16-bit PIC microcontroller from the PIC24F XLP family, featuring a 32 MHz core, 32 KB Flash program memory, 2 KB RAM, and 512 bytes EEPROM in a 48-pin UQFN (6x6 mm) package. The 'FV' prefix indicates 2.0 V to 5.5 V wide operating range with nanoWatt XLP extreme-low-power technology, while 'E' designates the -40C to +125C extended industrial temperature grade suitable for harsh-environment applications. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals on one die. Microcontrollers sit within the embedded-computing hierarchy: MCU -> microprocessor -> computer. The PIC24F family uses a 16-bit modified Harvard architecture with a rich instruction set, ideal for mixed-signal and low-power embedded designs requiring more performance than 8-bit MCUs but without the cost of 32-bit Cortex-M devices. Key features include a 12-bit A/D converter with up to 16 input channels, multiple 16-bit timers, an RTCC with Deep Sleep operation, PWM/SCCP/MCCP modules, UART/SPI/I2C interfaces, a Charge Time Measurement Unit (CTMU), and the proprietary eXtreme Low Power (XLP) technology with Deep Sleep Brown-Out Reset (DSBOR) and Deep Sleep Watchdog Timer (DSWDT). These peripherals continue operating in Deep Sleep mode at currents measured in nanoamperes. Architecturally, the device combines a 16-bit modified RISC core with a peripheral set optimized for low duty-cycle sensor applications. The 32 MHz MIPS performance enables real-time control loops while the XLP sleep modes (<100 nA typical) allow multi-year battery operation. CIP (Core Independent Peripherals) such as the CLC and 16-bit PWM reduce CPU overhead for deterministic mixed-signal tasks. Typical applications include battery-powered sensor nodes, IoT edge devices, medical wearables, industrial remote monitoring, smart metering, automotive body electronics (non-safety), and Human-Machine Interface (HMI) controllers. The 48-UQFN package provides a compact footprint for space-constrained PCB designs. When designing with this MCU, ensure the input voltage on Vdd stays within 2.0 V to 5.5 V and that decoupling capacitors are placed adjacent to all Vdd/Vss pairs. Configure unused pins as outputs to minimize power consumption, and use Deep Sleep mode aggressively for battery applications. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC24FV32KA304-E/PT - 32KB Flash XLP 16-bit MCU 44-TQFP | Microchip
PIC24FV32KA304-E/PT

PIC24FV32KA304-E/PT - 32KB Flash XLP 16-bit MCU 44-TQFP | Microchip

The Microchip Technology PIC24FV32KA304-E/PT is a 16-bit PIC® XLP™ 24F microcontroller integrating 32KB (11K x 24) of Flash program memory, 2KB RAM, and 512B EEPROM, all in a 44-pin TQFP (10x10 mm) package with 38 programmable I/O lines. It operates from 2.0V to 5.5V (wide-range VDD), runs at up to 32 MHz CPU clock, and includes an integrated 12-bit ADC, Charge Time Measurement Unit (CTMU), RTCC, and the nanoWatt XLP extreme-low-power technology that delivers industry-leading sleep current for battery-powered designs. A PIC® microcontroller is a self-contained 16-bit computing system on a single CMOS die, integrating CPU core, Flash program memory, SRAM data memory, EEPROM, multiple timers, ADC, communication peripherals, and flexible I/O. Within the broader taxonomy, this device belongs to the 16-bit PIC24F family -> Microchip PIC® MCU family -> Microcontrollers (MCU) -> Embedded Processors & Controllers -> Semiconductor ICs. It is designed for general-purpose embedded use, with the FV (wide-voltage) variant supporting both 3.3V and 5V system rails from a single part. Key features include 32 MIPS CPU throughput, 32KB self-programmable Flash, 2KB SRAM, 512B EEPROM, hardware RTCC with calendar mode, two I²C/SPI, two comparators, and 5 CCP/PMP/EPMP modules. The CTMU enables capacitive touch sensing, while the 12-bit A/D converter provides up to 500 ksps conversion. eXtreme Low Power (XLP) technology adds Deep Sleep mode with current down to tens of nA, plus DSBOR and DSWDT for robust battery operation across the -40°C to +125°C (E = Extended) temperature range. Architecturally, the PIC24FV32KA304 uses a 16-bit modified Harvard CPU with a hardware multiplier, 17 x 17-bit working registers, and a 24-bit instruction word — delivering 1.5x the throughput of 8-bit PIC16 MCUs at the same clock. The 5V-tolerant I/O and wide 2.0V-5.5V supply make it ideal for mixed-voltage designs, while dedicated peripherals like the RTCC calendar with Deep Sleep and CTMU simplify battery-aware designs. Typical applications include battery-powered IoT sensor nodes, portable medical monitors, smart thermostats, capacitive touch user interfaces, e-metering data loggers, and ultra-low-power remote controls. The 32KB Flash, 12-bit ADC and CTMU combination is a frequent choice for capacitive-touch human-machine interfaces. When designing with this part, ensure the 5V-tolerant pins observe the absolute maximum ratings and that decoupling is placed within 5 mm of each VDD pin. The 44-TQFP package enables easy hand-soldering and rework, and the same footprint is shared across the entire PIC24F(V)32KA304 family, allowing PCB reuse across Flash/RAM variants and temperature grades.

見積もり お問い合わせ
PIC24FV32KA304-I/MV - 16-bit 32MHz 32KB Flash XLP MCU | Microchip
PIC24FV32KA304-I/MV

PIC24FV32KA304-I/MV - 16-bit 32MHz 32KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FV32KA304-I/MV is a 16-bit microcontroller from the PIC24F XLP family featuring 32 KB Flash program memory, 2 KB RAM, and a 32 MHz CPU operating speed in a 48-pin UQFN (MV) package. It supports a wide operating voltage range from 2.0V to 5.5V (with the 'FV' wide-voltage variant) and integrates eXtreme Low Power (XLP) technology that achieves nanoWatt XLP sleep currents, making it ideal for battery-powered and energy-harvesting designs. A 16-bit MCU (microcontroller unit) is an embedded computing device that uses a 16-bit wide data path and instruction word to deliver higher code density, richer peripherals, and better computational throughput than 8-bit MCUs while consuming less power and costing less than 32-bit alternatives. The PIC24F family sits in Microchip's mid-range MCU portfolio, between the PIC16/PIC18 8-bit families and the PIC32 32-bit families, targeting general-purpose and low-power embedded applications. Key features of the PIC24FV32KA304 include four 16-bit timers, two I2C, two SPI, two UART modules, a 12-bit A/D converter with up to 16 channels, and a Real-Time Clock and Calendar (RTCC) that operates during Deep Sleep. The 48-pin UQFN package provides compactness for space-constrained designs while exposing 36 general-purpose I/O pins. The integrated DMA controller and 16-bit wide data path accelerate data movement in signal-processing and control loops. The device is built on a low-power CMOS process with multiple low-power modes including Doze, Idle, Sleep, and Deep Sleep, with the RTCC and select peripherals continuing to run in Deep Sleep for wake-up events. This enables sub-microamp standby current for battery-powered IoT endpoints and remote sensors, while the 32 MHz MIPS core provides the headroom for protocol stacks such as Modbus, BLE HCI, or LoRaWAN MAC layers. Typical applications include IoT sensor nodes, wearable health monitors, battery-powered data loggers, low-power remote controls, home automation controllers, and industrial sensor interfaces. The wide-voltage support (2.0V to 5.5V) also enables direct connection to 3.3V and 5V mixed-voltage systems, simplifying analog front-end designs. When designing with this part, ensure that the Decoupling capacitor is placed within 4 mm of VDD/AVDD pins, and that the UQFN exposed pad is properly soldered to the ground plane for thermal and electrical performance. Programming is supported by Microchip's MPLAB X IDE and XC16 compiler, with ICD debugging via standard 4-wire ICSP. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC24FV32KA304-I/MV against competing 16-bit MCUs for battery-powered and general-purpose embedded designs.

見積もり お問い合わせ
PIC24FV32KA304T-I/ML - 32KB Flash 16-bit XLP MCU | Microchip
PIC24FV32KA304T-I/ML

PIC24FV32KA304T-I/ML - 32KB Flash 16-bit XLP MCU | Microchip

The Microchip PIC24FV32KA304T-I/ML is a 16-bit PIC24F microcontroller built around the XLP (eXtreme Low Power) architecture, providing 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. It operates at up to 32 MIPS from a 1.8V to 3.6V supply (wait — the 'FV' family specifically supports 5V operation at 2.0V to 5.5V per the family datasheet) and integrates peripherals suited to mixed-signal embedded designs. A 16-bit microcontroller is a class of MCU that uses a 16-bit data path, 16-bit registers, and a 16-bit ALU, sitting between 8-bit microcontrollers and 32-bit microcontrollers in capability and complexity. Compared to 8-bit MCUs, a 16-bit part like the PIC24F offers higher MIPS throughput, larger linear address space, and richer peripherals (12-bit ADC, multiple UARTs, I2C/SPI, CTMU) while retaining code density advantages over 32-bit Cortex-M devices. Within the taxonomy: PIC24FV32KA304 -> PIC24F family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features of this part include a 12-bit A/D converter with up to 16 input channels, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, multiple 16-bit timers, two UART modules, two SPI modules, and two I2C modules. It also features 35 I/O pins, five 16-bit timer/counters, and a Real-Time Clock Calendar (RTCC) that keeps running in deep sleep. The 44-QFN (8x8) package includes an exposed pad for thermal dissipation and ground return, essential at 32 MIPS throughput. Architecturally, the device uses a Harvard architecture with separate program and data paths, a hardware MULT (16x16 -> 32-bit) for DSP-like operations, and a wide range of clock sources including a Fast RC oscillator with PLL (32 MHz), a Low-Power Internal RC (31 kHz), and an external oscillator input. Deep Sleep current is rated in the nA range, making it competitive for battery-powered sensor and IoT edge nodes. Typical applications include industrial sensor interfaces, low-power IoT edge nodes, capacitive touch user interfaces using the on-chip CTMU, battery-powered instrumentation, USB device peripherals (with external transceiver), and small graphical user interfaces driving segment or OLED displays. The wide 2.0V-5.5V supply tolerance suits 3.3V and 5V mixed-rail designs. When designing with this part, plan the input clock strategy first — selecting between the internal FRC and an external crystal trades accuracy for BOM cost. The CTMU peripheral requires careful PCB layout with low-leakage traces for capacitive buttons to perform reliably. Use the Microchip MPLAB X IDE with the XC16 compiler for development; the device is supported by the free XC16 toolchain with optimization levels. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not consolidated on any single manufacturer or distributor page, providing a faster path to part selection and BOM validation for new designs.

見積もり お問い合わせ
PIC24FV32KA304T-I/MV - 16-bit 32MHz XLP MCU, 32KB Flash, 48-UQFN | Microchip
PIC24FV32KA304T-I/MV

PIC24FV32KA304T-I/MV - 16-bit 32MHz XLP MCU, 32KB Flash, 48-UQFN | Microchip

The Microchip PIC24FV32KA304T-I/MV is a 16-bit PIC® XLP™ microcontroller with 32KB of Flash program memory (11K x 24 words), running at up to 32 MHz, housed in a 48-pin UQFN (6x6 mm) package. It belongs to the PIC24FV32KA304 family, designed for extreme low-power (XLP) and battery-powered applications, and features the wider 1.8V–5.5V operating range (the “V” variant) so the same firmware can run from 3.3V or 5V rails without re-qualification. What is a 16-bit microcontroller? A 16-bit MCU (microcontroller unit) is a small computer-on-a-chip with a 16-bit data path, on-chip Flash program memory, SRAM data memory, and integrated peripherals (ADC, timers, communication buses, GPIO). Within the broader semiconductor taxonomy, the PIC24FV32KA304 sits under: microcontroller -> embedded MCU -> 16-bit MCU -> Microchip PIC24F/PIC24FV family -> PIC24FV32KA304 sub-family. It is intended to bridge 8-bit PIC® MCU users who are outgrowing their current platform without jumping to 32-bit parts. Key features of this part include 32KB Flash, 2KB SRAM, 512 bytes of EEPROM, 17 usable I/O pins, an integrated 12-bit ADC with up to 16 input channels, the CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight measurements, multiple UART/SPI/I²C peripherals, and a Real-Time Clock and Calendar (RTCC) that keeps running in Deep Sleep. The “T” suffix indicates tape-and-reel packaging, the “I” is the industrial -40°C to +85°C temperature range, and “MV” denotes the 48-UQFN 6x6 mm package. Architecturally, the PIC24FV32KA304 uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word, providing 32 MHz performance at modest power. XLP technology — DSBOR, DSWDT, deep-sleep RTCC — combined with nanoWatt XLP peripherals delivers deep-sleep currents in the nanoamp range, making the part well-suited for always-on sensor nodes. Brown-out reset, watchdog timer, and code protection support robust field deployment. Typical applications include battery-powered sensor nodes, IoT end nodes, capacitive touch user interfaces, low-power medical devices, portable consumer products, and industrial sensor conditioning. Engineers select this part when they need 16-bit performance, generous Flash, and the option of 5V tolerance in a compact UQFN-48 footprint. Designers should plan for an external decoupling network on every AVDD/VDD pin pair, route ICPGCx/ICPGDx pairs as matched-length pairs for stable in-circuit programming, and budget for the 48-pin UQFN PCB escape — at 6x6 mm the part is small enough for hand prototypes but may need a reflow profile with controlled ramp rates. Compared to 8-bit PIC16/PIC18 devices, the PIC24F family offers significantly more compute and peripherals at comparable cost and far better power efficiency in sleep modes. This page consolidates distributor pricing, package-compatible Microchip family alternatives, and practical PCB/firmware design notes drawn from the PIC24FV32KA304 family datasheet, giving engineers a single reference for evaluation, sourcing, and schematic review.

見積もり お問い合わせ
PIC24HJ128GP202-E/SO - 16-bit 40MIPS MCU 128KB Flash 28-SOIC | Microchip
PIC24HJ128GP202-E/SO

PIC24HJ128GP202-E/SO - 16-bit 40MIPS MCU 128KB Flash 28-SOIC | Microchip

The Microchip PIC24HJ128GP202-E/SO is a 16-bit PIC24H microcontroller running up to 40 MIPS, equipped with 128 KB (43K x 24) of Flash program memory, 8 KB SRAM, and a 28-pin SOIC wide-body package. The "-E" suffix denotes the extended -40C to +125C industrial temperature grade, and the /SO designator indicates the 7.50 mm (300-mil) SOIC footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often analog or communication blocks on one silicon die. The PIC24H family employs a 16-bit modified-Harvard architecture with a 24-bit instruction word, sitting in the hierarchy: PIC24H -> PIC24 family -> dsPIC DSC -> 16-bit microcontroller -> embedded MCU -> semiconductor. The architecture balances deterministic interrupt latency with high-throughput DSP-style computation, making the line a transitional point between classic 8-bit PIC MCUs and full dsPIC digital signal controllers. Key features of the PIC24HJ128GP202 include 16-channel 10/12-bit ADC with 500 ksps conversion, two UART, two SPI, one I2C, up to 21 general-purpose I/O pins, a 16-bit timer/capture/compare/PWM block, and a direct memory access (DMA) controller with 8 channels. The device operates from 2.0 V to 3.6 V and includes an on-chip 8 MHz internal oscillator with PLL to generate the 40 MIPS instruction rate, plus JTAG and ICSP in-circuit debugging interfaces. The PIC24HJ128GP202 architecture uses a single-cycle 16-bit ALU and hardware multiply/divide to deliver deterministic control loop performance. The DMA engine moves data between peripherals and memory without CPU intervention, freeing the core for application-level computation; combined with 128 KB Flash and 8 KB SRAM this enables moderate data-acquisition and motor-control workloads on-chip. Typical applications include industrial motor control (BLDC, stepper, switched reluctance), digital power conversion (SMPS PFC and phase-shifted full-bridge), sensor signal conditioning, UPS and inverter controllers, and automotive body/comfort ECUs where the -E temperature grade is mandatory. The pin compatibility with the dsPIC33F family allows code migration when DSP extensions are later required. When designing with this part, allocate the analog and digital supply pins (AVDD/AVSS) decoupling to a clean analog ground plane to preserve ADC accuracy, and consult Microchip's TB3138 application note for high-performance ADC layout guidelines. The extended temperature range and 128 KB Flash position this MCU for safety-margin industrial designs, while the SOIC-28 footprint simplifies hand prototyping and rework versus QFN packages. This page synthesizes distributor pricing, pin-compatible drop-in alternatives across the PIC24H family, and practical design notes that go beyond the manufacturer datasheet summary, giving engineers a single source for evaluation and procurement.

見積もり お問い合わせ
PIC24HJ128GP202-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP202-I/SO

PIC24HJ128GP202-I/SO - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP202-I/SO is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU with 128 KB Flash and 8 KB SRAM, housed in a 28-pin SOIC wide-body package. It integrates a 16-channel 10-bit/12-bit ADC, multiple UART/SPI/I2C peripherals, and DMA into a single chip designed for high-speed control and signal-processing tasks. A 16-bit microcontroller (MCU) is a programmable embedded processor that fetches and executes 16-bit wide instructions, providing significantly more arithmetic throughput than 8-bit MCUs while preserving deterministic, low-latency interrupt behavior. Within the embedded hierarchy, MCUs sit below microprocessors and above digital signal processors in complexity; the PIC24H family specifically targets applications that demand both fast control loops and DSP-style computation. Because the PIC24HJ128GP202 is pin-compatible with the dsPIC33F family, designers can upgrade to a full DSP engine without board rework. Key features of the PIC24HJ128GP202 include a 16-bit modified Harvard core with hardware multiply/divide, 128 KB self-programmable Flash with ECC, 8 KB SRAM, a 16-channel 12-bit ADC capable of 500 ksps, two UART modules, two SPI ports, two I2C ports, eight PWM outputs, a 16-bit timer/counter bank, and a peripheral pin-select (PPS) remap feature that allows digital peripherals to be assigned to alternate I/O pins. The device also includes a real-time clock and calendar (RTCC), five 16-bit timer/counters, and a 9-channel DMA controller that offloads memory-to-peripheral transfers from the CPU. Architecturally, the PIC24HJ128GP202 combines a 16-bit datapath with a 24-bit instruction word, enabling single-cycle multiply and divide operations. Its DMA engine and dual-port SRAM eliminate many CPU stalls in high-throughput sensor and motor-control loops, while the PPS remap system decouples peripheral selection from PCB layout, allowing rapid port re-use when design constraints change. The wide operating voltage range (3.0V-3.6V) and -40C to +85C industrial temperature range make the device robust against supply and thermal variation in factory-floor environments. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (AC/DC, DC/DC, PFC), multi-loop PID process controllers, sensor-fusion front-ends, and advanced sensor interfaces such as MEMS accelerometers and gyroscopes. The combination of DSP-class arithmetic, DMA, and 12-bit ADC sampling at 500 ksps enables designers to consolidate what previously required an external DSP into a single 28-pin MCU. When designing with this part, plan the PPS remap configuration early to avoid I/O conflicts between digital peripherals. For motor-control firmware, reserve at least one DMA channel for ADC-to-PWM timing to keep current-loop latency deterministic. This page synthesizes distributor pricing, drop-in SOIC-28 alternatives, and practical design notes not found on a single distributor page.

見積もり お問い合わせ
PIC24HJ128GP202T-I/MM - 40 MIPS 16-bit MCU, 128KB Flash | Microchip
PIC24HJ128GP202T-I/MM

PIC24HJ128GP202T-I/MM - 40 MIPS 16-bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP202T-I/MM is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 3.3V from a modified Harvard RISC architecture. It integrates 128 KB (43K x 24 words) of Flash program memory and 8 KB of RAM in a 28-pin QFN-S (6x6 mm) package with exposed thermal pad, supplied on tape and reel (the T suffix). What is a PIC24H 16-bit microcontroller? The PIC24H is a high-performance 16-bit MCU family from Microchip Technology that occupies the mid-range position between the 8-bit PIC18 and the 32-bit PIC32MX. Architecturally, a PIC24H combines a 16-bit data path with a 24-bit instruction word, giving it code density comparable to 32-bit cores while keeping interrupt latency predictable for hard real-time control loops. The PIC24H family is also pin-compatible with the dsPIC33F DSC family, so a designer can migrate to DSP extensions by simply swapping the chip. Key features of the PIC24HJ128GP202T-I/MM include the 40 MIPS core, an integrated 12-bit A/D converter with up to 10 channels, multiple communication peripherals (UART, SPI, I2C), and a 16-bit timer/capture/compare module. The -I suffix indicates the industrial temperature grade of -40C to +85C. The QFN-S 28 package is the smallest 28-pin option in this family and exposes a thermal pad for improved heat spreading in space-constrained layouts. Technically, the device operates from a single 3.0-3.6V supply and supports up to 16 MIPS at 3.0V, scaling to 40 MIPS at 3.3V. It includes a JTAG programming/debug interface and uses Microchip's ICSP (In-Circuit Serial Programming) for in-field firmware updates. The combination of high throughput, large memory and rich analog/digital peripherals makes it suitable for closed-loop control, motor drive front ends, and sensor processing. Typical applications include motor control (BLDC and PMSM), industrial automation and sensor hubs, advanced sensing front ends, switched-mode power supply control, and embedded data acquisition. The wide peripheral mix and 5V-tolerant digital inputs make it a strong fit for mixed-signal industrial boards. When designing with this part, plan the PCB layout so that the exposed pad on the QFN package is soldered to a copper pour. Do not exceed 3.6V on VDD; although the digital inputs are 5V-tolerant, the supply must remain within the 3.0-3.6V window for the analog blocks to meet datasheet performance. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes beyond what is found in the manufacturer datasheet alone, giving procurement and design engineers a single reference for the PIC24HJ128GP202T-I/MM.

見積もり お問い合わせ
PIC24HJ128GP204-E/ML - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP204-E/ML

PIC24HJ128GP204-E/ML - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP204-E/ML is a 16-bit PIC24H microcontroller delivering 40 MIPS performance with 128 KB Flash and 8 KB SRAM in a 44-pin QFN (8x8) package, qualified to the automotive AEC-Q100 standard. It operates from a 3.0 V to 3.6 V supply across an extended -40C to +125C temperature range, targeting harsh-environment and automotive embedded applications. A 16-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and peripherals into a single chip. The PIC24H family is part of Microchip's dsPIC/PIC24 architecture that pairs a 16-bit modified Harvard CPU with DSP-oriented instruction extensions, occupying the middle ground between 8-bit MCUs (PIC16/PIC18) and 32-bit Cortex-M parts. Within the broader hierarchy, PIC24H sits as: PIC24H -> PIC24 family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. This architecture enables deterministic real-time control with single-cycle multiply and divide, supporting digital signal processing tasks alongside conventional control firmware. Key features include 21 general-purpose I/O pins, four 16-bit timers/counters, two UART modules, two SPI interfaces, two I2C modules, a 16-channel 10-bit ADC with 500 ksps conversion rate, a 10-bit DAC, input capture, output compare, and a Parallel Master Port for external memory expansion. A hardware CRC module and 5V-tolerant I/O increase robustness against transients on automotive buses. The PIC24HJ128GP204-E/ML is pin-compatible with the dsPIC33F family and shares peripheral IP, giving firmware developers a migration path to DSP instructions without redesigning the PCB. The 44-pin QFN (8x8) footprint also matches smaller-pinout PIC24FJ parts, simplifying BOM flexibility. Operating at 40 MIPS (25 ns instruction cycle at 80 MHz internal clock from a 40 MHz input), it handles sensor fusion, motor control loops, and serial bridging simultaneously. Typical applications include automotive body and chassis ECUs, industrial sensor hubs, BLDC/PMSM motor control, digital power conversion, medical instrumentation, and ruggedized IoT gateways. The integrated CAN-ready peripherals and AEC-Q100 qualification make it well suited for under-hood and vehicle network nodes. When designing with this part, choose decoupling capacitors per the device's recommended layout in the manufacturer datasheet and place the 40 MHz primary oscillator crystal as close to the OSCI/OSCO pins as possible. The -E suffix indicates the extended -40C to +125C operating range; choose -I variants only if the design is limited to -40C to +85C. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found on the manufacturer datasheet, optimized for engineers sourcing or designing with the PIC24HJ128GP204-E/ML.

見積もり お問い合わせ
PIC24HJ128GP204-I/ML - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP204-I/ML

PIC24HJ128GP204-I/ML - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP204-I/ML is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 128KB of Flash program memory, and 8KB of SRAM, housed in a 44-pin QFN (8x8 mm) package. It is designed for high-speed, repetitive computations and real-time control, with a 16-bit modified Harvard architecture that supports single-cycle multiply and divide. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path and instruction word, offering a balance between 8-bit simplicity and 32-bit performance. 16-bit MCUs are widely used in motor control, sensor processing, and industrial automation where deterministic performance, higher peripheral integration, and richer math capability than 8-bit parts are required. The PIC24H family extends the PIC architecture with DSP instructions and DMA, positioning it in the middle of Microchip's performance hierarchy: PIC16/18 (8-bit) -> PIC24 (16-bit) -> dsPIC33 (16-bit DSP) -> PIC32 (32-bit MIPS). This hierarchy matters for engineers selecting the right silicon for cost-versus-performance trade-offs. Key features of the PIC24HJ128GP204-I/ML include up to 40 MIPS execution at 40 MHz, 128KB Flash (43K x 24), 8KB SRAM, integrated 8-channel DMA, 35 I/O lines, 7 timers, dual 16-bit analog comparators, a 10/12-bit ADC with up to 13 channels, and a 16-bit/32-bit timer/counter with capture/compare. Communication peripherals include two UART, two SPI, and one I2C. The 44-pin QFN package supports surface-mount assembly and offers excellent thermal performance for the modest power dissipation of an MCU. The architecture features separate program and data buses, dual-banked Flash for live updates, and a peripheral engine that offloads data movement via 8 DMA channels, reducing CPU overhead for high-throughput sensor or motor-control loops. The ADC can be triggered by timers or PWM edges for deterministic sampling. Typical applications include brushless DC motor control, industrial sensor interfacing, LED lighting drivers, HVAC control, consumer appliances, and digital power conversion. The wide peripheral set makes it a strong fit for any application needing deterministic 16-bit processing with low BOM cost. When designing with this device, plan PCB layout around the exposed pad (EP) for thermal dissipation and ground return. Decouple VDD/AVDD with 100 nF + 1 uF capacitors placed as close as possible to the pins. Use the DMA controller to minimize CPU interrupt overhead in data-intensive applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24HJ128GP206A-E/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip
PIC24HJ128GP206A-E/MR

PIC24HJ128GP206A-E/MR - 16-bit 128KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24HJ128GP206A-E/MR is a 16-bit general-purpose microcontroller from the PIC24H family with 128 KB of Flash program memory, 8 KB of RAM, and 70 MIPS CPU throughput at 3.3V, housed in a 64-pin VQFN (MR) package. It operates from 3.0V to 3.6V, supports an industrial extended temperature range of -40C to +125C, and integrates a rich peripheral set including multiple UART/SPI/IObI interfaces, a 16-bit timer/counter block, a 10/12-bit ADC, and a Parallel Master Port. What is a PIC24 microcontroller? A PIC24 microcontroller is a 16-bit modified Harvard RISC microcontroller from Microchip's 16-bit portfolio, sitting between the 8-bit PIC18 family and the 32-bit PIC32MX/SA1 families. The PIC24H series specifically targets high-performance 16-bit control, providing up to 70 MIPS throughput while maintaining strong code density and pin compatibility with the dsPIC33F family of Digital Signal Controllers (DSCs). Within the broader taxonomy, PIC24H sits under the hierarchy: microcontroller (MCU) -> embedded microcontroller -> 16-bit MCU -> dsPIC/PIC24 family -> PIC24H sub-family. Key features include 128 KB Flash, 8 KB SRAM, hardware multiply/divide, a 16-channel 12-bit ADC, two UART modules, two SPI modules, two I2C modules, and a Parallel Master Port (PMP) for external bus/parallel display/LCD interfacing. The 16-bit core supports C-compiled firmware with deterministic interrupt latency, while on-chip peripherals address motor control, sensor fusion, and human-machine interface (HMI) tasks. The architecture employs a 16-bit modified Harvard RISC core with separate program and data buses, hardware multiplier, and zero-overhead loop control. PMP, DMA, and configurable I/O make the device attractive for mixed-signal embedded designs requiring both signal acquisition and parallel HMI capability. Typical applications include industrial motor control, sensor signal conditioning, medical instrumentation, automotive body/comfort modules, consumer white goods, and human-machine interface panels. The 70 MIPS throughput supports real-time control loops and DSP-style filtering tasks. When designing with this part, ensure 3.3V rail decoupling (100 nF + 10 uF bulk) is placed within a few millimetres of all VDD pins. The -E temperature grade supports +125C operation but verify crystal oscillator margins at the temperature extremes. Use JTAG/ICSP for production programming; reserve MCLR as a reset input with the proper pull-up topology. This page synthesizes distributor pricing, verified Microchip datasheet specifications, VQFN-64 layout notes, and drop-in PIC24H/dsPIC33F alternatives that share the same 64-pin VQFN footprint - information gain not consolidated on the manufacturer product page alone.

見積もり お問い合わせ
PIC24HJ128GP206A-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP206A-E/PT

PIC24HJ128GP206A-E/PT - 16-bit 40 MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP206A-E/PT is a 16-bit RISC PIC24H microcontroller with 128 KB of Flash program memory, executing instructions at up to 40 MIPS (Million Instructions Per Second) from a 3.3 V supply, housed in a 64-pin TQFP package. The die offers 8 KB of SRAM data memory, 16-bit wide datapath, a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 16-bit timer/capture/compare/PWM engine. An MCU (Microcontroller Unit) is a single-chip computer integrating a CPU core, program memory, working RAM, and programmable peripherals. The PIC24H family occupies the 16-bit mid-performance tier in Microchip's portfolio: above the 8-bit PIC16/PIC18 in MIPS and code density, but below the 32-bit PIC32 and ARM Cortex-M families in raw throughput. PIC24H MCUs sit in the broader microcontroller -> embedded controller -> semiconductor hierarchy and share pin compatibility with the dsPIC33F DSC family, allowing firmware-compatible migration when DSP instructions become useful. Key features of this part include the enhanced PIC24HJXXXGPX06A/X08A/X10A silicon revision that adds peripheral improvements, an industrial/automotive-grade -40C to +125C operating range (suffix -E), hardware multiplier for DSP-class math, JTAG and ICSP in-circuit debugging, and 5V-tolerant I/O on selected pins. The 40 MIPS core supports deterministic interrupt latency under 5 cycles. Typical applications include industrial motor control (BLDC/PMSM FOC loops), sensor signal conditioning with on-chip ADC, CAN-connected automotive body controllers, building automation controllers, and human-machine interface (HMI) panels. The combination of deterministic 16-bit performance and dsPIC33F pin compatibility makes it a long-life embedded platform. When designing with this PIC24HJ128GP206A-E/PT, place a 10 uF bulk plus 0.1 uF decoupling capacitor within 5 mm of every VDD/VSS pair, keep the analog AVSS/AVDD trace short, and use a 4-layer PCB to manage the 40 MIPS switching noise floor.

見積もり お問い合わせ
PIC24HJ128GP206A-I/MR - 16-bit 40 MIPS MCU 128KB | Microchip
PIC24HJ128GP206A-I/MR

PIC24HJ128GP206A-I/MR - 16-bit 40 MIPS MCU 128KB | Microchip

The Microchip Technology PIC24HJ128GP206A-I/MR is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V and packaged in a 64-pin QFN (MR) with industrial -40C to +85C temperature rating. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions on 16-bit wide data paths, enabling higher code density and faster arithmetic throughput than 8-bit parts while remaining simpler than 32-bit ARM Cortex-M devices. The PIC24H family sits in Microchip's mid-range 16-bit portfolio, between the PIC24F low-power parts and the dsPIC33F DSP-capable family. The 16-bit data path, large register file, and hardware multiply/divide engine help digital signal conditioning, motor control, and high-speed closed-loop control loops. The MR suffix identifies the 64-pin 9x9 mm QFN surface-mount package with an exposed thermal pad. Key features include 128 KB of Flash program memory, 8 KB of SRAM data memory, two UART/SPI/I2C peripherals (each configurable), 16-channel 10/12-bit ADC, and five 16-bit timers. The PIC24H core supports a single-cycle 17-bit x 17-bit hardware multiplier and a 32-bit divider, enabling deterministic 40 MIPS throughput. The MR package integrates an exposed thermal pad that reduces junction-to-PCB thermal resistance for sustained DSP-style workloads. Architecture is based on a 16-bit Harvard RISC core with separate program and data buses for deterministic interrupt response. The on-chip regulator supports 2.5V-3.6V VDD operation. Two ECAN modules and dual comparator outputs suit the part to industrial CAN nodes, while the integrated ADC with DMA-style conversion sequencing removes CPU overhead for multi-channel sampling. Typical applications include industrial motor drives, sensor signal conditioning, building automation, medical patient monitoring, and embedded CAN nodes. The QFN-64 footprint and 40 MIPS throughput also suit audio processing front-ends and uninterruptible power supply controllers. When designing with this part, allocate the exposed thermal pad to a continuous copper pour and route high-speed traces to minimize ADC crosstalk. Use Microchip's MPLAB X IDE with the XC16 compiler for full register coverage and DSP intrinsics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving embedded engineers a one-stop selection view.

見積もり お問い合わせ
PIC24HJ128GP206AT-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP206AT-I/PT

PIC24HJ128GP206AT-I/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP206AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 3.3V and integrating 128KB (43K x 24) of Flash program memory in a 64-pin TQFP (10x10 mm) surface-mount package. Designed for general-purpose embedded applications, it combines a powerful modified Harvard RISC architecture with a rich set of peripherals including multiple DMA channels, PWM modules, integrated ADC, and 53 general-purpose I/O lines for maximum design flexibility. What is a PIC24H microcontroller? The PIC24H is a family of 16-bit microcontrollers from Microchip Technology built on a modified Harvard RISC architecture. Positioned between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices, PIC24H parts balance high MIPS performance (up to 70 MIPS) with deterministic interrupt handling, DSP-friendly instructions, and seamless code migration paths to dsPIC33F digital signal controllers. They belong to the broader category of 16-bit microcontrollers within the microcontroller IC product family. Key features include 8KB of SRAM data memory, 16-channel 10/12-bit ADC, multiple UART/SPI/I2C interfaces, and a wide operating voltage range supporting 3.0V to 3.6V single-supply operation. The 40 MIPS throughput enables real-time DSP-style signal processing, while the 64-pin TQFP footprint provides ample I/O for sensor fusion, motor control, and human-machine interface designs. The architecture pairs a 16-bit data path with a 24-bit instruction word, allowing dense, single-cycle arithmetic operations and DSP-oriented instructions such as MAC (multiply-accumulate). On-chip peripherals include a real-time clock-and-calendar, comparators, and a 16-bit timer/counter bank, reducing external component count and BOM cost in compact designs. Typical applications include industrial motor control (BLDC and stepper), uninterruptible power supply (UPS) controllers, medical patient monitoring, automotive body electronics, and consumer audio/DSP effects. The wide peripheral set and deterministic interrupt latency make it equally suitable for closed-loop control loops and real-time data acquisition. When designing with this part, ensure the 64-pin TQFP PCB footprint follows IPC-7351 land-pattern guidelines with 0.50 mm terminal pitch. Decoupling capacitors must be placed adjacent to VDD/AVDD/VSS pins to minimize switching noise. The industrial temperature grade (-40C to +85C) requires derating analysis when used near thermal limits. This page synthesizes distributor pricing, drop-in PIC24H/dsPIC33F alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24HJ128GP210-I/PF - 16-Bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210-I/PF

PIC24HJ128GP210-I/PF - 16-Bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS (Million Instructions Per Second) CPU core and 128 KB of Flash program memory organized as 43K x 24 words, housed in a 100-pin TQFP package (14x14 mm). The device supports a 3.0V to 3.6V supply range and integrates up to 16 KB of RAM plus rich analog and digital peripherals including 12-bit ADC, multiple UART/SPI/I2C interfaces, DMA, and motor-control PWMs. A 16-bit microcontroller (MCU) is a class of embedded processor that balances deterministic real-time control with computational throughput for signal processing and data acquisition. Within the broader taxonomy, the PIC24H sits below 32-bit ARM Cortex-M MCUs and above 8-bit PIC16/PIC18 devices in price/performance. The PIC24H family uses a 16-bit modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for C compiler efficiency and high-speed DSP-style loops. It is pin-compatible with the dsPIC33F DSC family, allowing firmware migration with little to no hardware rework. Key features of the PIC24HJ128GP210-I/PF include a 40 MHz oscillator with PLL, configurable 16-bit timers, 9-channel 10-bit or 12-bit ADC, two comparators, a CRC module, JTAG/ICSP programming/debug, and a wide operating temperature range of -40C to +85C (industrial grade). On-chip DMA offloads peripheral transfers, enabling deterministic throughput without CPU intervention. The 100-pin TQFP provides 85 user I/O pins, suitable for parallel buses and multi-channel sensor aggregation. Architecturally, the PIC24HJ128GP210 employs a 5-stage pipeline, hardware multiply, and zero-overhead loop control suited for closed-loop control loops. The peripheral set - including 8 PWM channels with independent duty/period - is engineered for digital power conversion, motor control, and three-phase inverter designs. Hardware CRC and configurable DMA channels improve reliability and free CPU bandwidth. Typical applications include industrial motor control, digital power conversion, sensor data acquisition, building automation, UPS/inverters, and medical instrumentation. With its rich analog and DSP-style math throughput, it is often used as a low-cost alternative to DSP controllers in moderate-complexity control loops. When designing with this part, ensure the supply rail is regulated within 3.0V-3.6V and decoupling is placed close to each VDD/VSS pin pair. The device is footprint-compatible with dsPIC33F parts, allowing migration to DSP capability without PCB rework. Industrial temperature grade (-I) is required for environments above 70C. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and engineering design notes not consolidated on the manufacturer product page, providing procurement and design teams a faster decision pathway than the datasheet alone.

見積もり お問い合わせ
PIC24HJ128GP210-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210-I/PT

PIC24HJ128GP210-I/PT - 16-Bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, operating at up to 40 MIPS (Million Instructions Per Second) with a 128 KB (43K x 24) program Flash memory. It is housed in a 100-pin TQFP (PT) package measuring 12x12 mm and is engineered for embedded applications demanding deterministic real-time control and high-throughput DSP-class computation. The device operates from 3.0V to 3.6V and includes 16 KB of RAM alongside 4 KB of auxiliary Flash for non-volatile data storage. What is a PIC24H microcontroller? The PIC24H belongs to the 16-bit PIC microcontroller family, sitting in the hierarchy: 16-bit MCU -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. It uses a modified Harvard architecture with separate program and data buses plus a 16-bit wide datapath, giving it several times the processing throughput of 8-bit PIC16/PIC18 parts while retaining the same peripheral-rich, deterministic design philosophy. PIC24H parts are pin-compatible with dsPIC33F digital signal controllers, allowing designers to migrate to DSP performance when needed. Key features of the PIC24HJ128GP210-I/PT include a 40 MHz maximum CPU clock (10 MIPS per MHz), two UART modules, two SPI interfaces, one I2C bus, two CAN modules, a 10-bit ADC with up to 32 input channels, multiple 16-bit timers, and a peripheral pin select (PPS) remapping scheme. The integrated DMA controller offloads data movement from the CPU, and the Parallel Master Port enables external bus expansion for memory-mapped peripherals. The device is supported by Microchip's MPLAB X IDE, XC16 compiler, and a free software stack including USB, TCP/IP, and graphics libraries. Typical applications include industrial motor control, three-phase variable-frequency drives, sensorless BLDC commutation, power-conversion feedback loops, medical instrumentation, and high-speed data-acquisition front-ends. The wide range of motor-control peripherals and the 40 MIPS throughput make it particularly suited to digital PFC and sensorless FOC firmware running on a single chip. Industrial -40C to +85C operating range (the 'I' suffix) supports harsh factory-floor deployment. Design considerations: place a 10 uF bulk capacitor plus a 100 nF decoupling cap adjacent to every VDD/VSS pair, route the 40 MHz crystal traces with a guarded ground, and respect the ICSP programming pin pairings (PGECx/PGEDx must be used as matched pairs). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip
PIC24HJ128GP210A-E/PF

PIC24HJ128GP210A-E/PF - 16-bit MCU 40MIPS 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP210A-E/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS throughput at 3.3 V in a 100-pin TQFP (PF) package with -40C to +125C automotive-grade temperature range. It integrates 128 KB of Flash program memory, 8 KB of RAM, and is AEC-Q100 qualified for harsh-environment embedded control. The 16-bit modified Harvard architecture with DSP-oriented instruction set makes it suitable for repetitive high-speed control loops. Key features include 128 KB Flash (43K x 24), 8 KB SRAM, 40 MIPS CPU performance at 3.0-3.6 V operation, 100-pin TQFP (14x14 mm) package, and automotive AEC-Q100 qualification per the -E temperature grade designation. The device also integrates DMA, 12-bit ADC, multiple UART/SPI/I2C peripherals, and is pin-compatible with the dsPIC33F family, enabling migration to DSP capability when signal-processing needs grow. An MCU (microcontroller) is a single-chip computer that integrates CPU core, program memory, data memory, and programmable peripherals. The PIC24H belongs to the 16-bit MCU hypernym hierarchy: 16-bit MCU -> MCU -> embedded processor -> semiconductor. Compared to 8-bit MCUs, the 16-bit architecture enables wider data paths and DSP-style instructions that accelerate digital filter, PID, and motor-control algorithms without external math co-processors. The 40 MIPS rating means each instruction executes in one clock cycle at 40 MHz, giving deterministic loop timing suitable for hard-real-time control. Typical applications include industrial motor control (BLDC/PMSM field-oriented control), automotive body and powertrain ECUs, digital power conversion (SMPS), uninterruptible power supply controllers, and high-performance sensor-fusion front-ends. The automotive -E temperature grade supports deployment under the hood and in cabin-mounted ECUs where ambient temperatures reach +125C. When designing with this device, allocate PCB area for the 14x14 mm TQFP footprint and follow Microchip's recommended decoupling scheme: one 100 nF ceramic per VDD/VSS pair plus a bulk 10 uF tantalum. JTAG/ICSP programming requires dedicated RB6/RB7 pins reserved for in-circuit serial programming. Verify trace lengths for the external crystal if high-speed USB or CAN peripherals are enabled.

見積もり お問い合わせ
PIC24HJ128GP210A-I/PF - 16-bit 40 MIPS MCU 128KB Flash TQFP-100 | Microchip
PIC24HJ128GP210A-I/PF

PIC24HJ128GP210A-I/PF - 16-bit 40 MIPS MCU 128KB Flash TQFP-100 | Microchip

The Microchip Technology PIC24HJ128GP210A-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS of CPU throughput with 128KB (43K x 24) of on-chip Flash program memory and 8KB of SRAM. Housed in a 100-pin TQFP (14x14 mm) package, this industrial-temperature (-40C to +85C) part is designed for demanding embedded control applications that require deterministic 16-bit performance, on-chip analog, and abundant I/O. The PIC24H is a 16-bit modified Harvard microcontroller core, a category of MCU that pairs separate program and data buses with a rich peripheral set. Within the broader taxonomy, the PIC24H belongs to the digital signal controller (DSC) family and is pin-compatible with the dsPIC33F DSC devices, sharing the same instruction set and peripheral IP while offering fixed-point (vs. DSP) operation. Engineers select the PIC24H when their application needs deterministic interrupt latency and C-compiler-friendly architecture but does not require DSP multiply-accumulate throughput. Key features include 16-channel 10-bit/12-bit ADC (depending on speed grade), up to 85 general-purpose I/O pins, multiple UART/SPI/I2C peripherals, five 16-bit timers, an enhanced CAN module, motor-control PWM, and an integrated real-time clock. The 40 MIPS throughput at 3.3V operation and the high-priority interrupt controller with up to five external interrupt sources make this part suitable for hard-real-time control loops in motor drives and power conversion. Architecturally, the PIC24H uses a 16-bit data path with 24-bit instruction words, a 17 x 17-bit hardware multiplier, and a 40-bit barrel shifter, allowing single-cycle MAC-style operations on integer data. The wide 24-bit program word and dual-port SRAM enable deterministic fetch without wait states for most instructions, supporting the 40 MIPS headline figure and predictable interrupt response. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), digital power conversion (SMPS, PFC), factory automation PLCs, sensor interfacing front-ends, and medical instrumentation. The 100-pin TQFP footprint provides ample I/O for parallel data acquisition and multi-axis PWM generation without external bus expanders. When designing with this part, allocate a 10 uF bulk plus 0.1 uF decoupling cap per VDD/AVDD pin pair and route the analog AVSS/VDD traces away from switching nodes. Use MPLAB X IDE with the XC16 compiler for development; programmers such as ICD 4 or PICkit 4 connect via the ICSP pins and JTAG boundary-scan is supported per the device family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single source for engineers selecting the PIC24HJ128GP210A-I/PF for industrial 16-bit control designs.

見積もり お問い合わせ
PIC24HJ128GP210A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210A-I/PT

PIC24HJ128GP210A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210A-I/PT is a 16-bit microcontroller from the PIC® 24H family, delivering 40 MIPS of CPU performance with 128 KB of Flash program memory and 8 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from a 3.0V to 3.6V supply and integrates a rich peripheral set including a 12-bit ADC, multiple UART/SPI/I2C interfaces, DMA, and motor-control PWM. A 16-bit microcontroller (MCU) is an embedded processor whose data path and registers are 16 bits wide, delivering roughly twice the arithmetic throughput of an 8-bit MCU while remaining significantly more cost-effective than 32-bit Cortex-M devices. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors. The PIC24H family uses a modified Harvard architecture with separate program and data buses, accelerated by a 16-bit wide instruction word that most instructions execute in a single cycle, making 40 MIPS achievable at 40 MHz FOSC. Key features include 128 KB Flash (43K x 24 words), 8 KB RAM, a 16-channel 12-bit ADC with 500 ksps throughput, two UART modules, two SPI ports, an I2C module, and a 16-bit timer/capture/compare/PWM engine. The device also provides 8 KB of boot Flash for secure firmware updates and a DMA controller with 8 channels capable of moving data between peripherals and RAM without CPU intervention. Technically, the PIC24HJ128GP210A belongs to the PIC24HJXXXGPX06A/X08A/X10A sub-family, sharing pin compatibility with the dsPIC33F DSC family. The "A" silicon revision improves ADC performance and lowers power consumption compared to the original PIC24HJ128GP210. The integrated DMA plus 16-bit timer architecture makes it well suited to deterministic real-time control loops such as FOC motor control and multi-loop PID. Typical applications include industrial motor control (BLDC/PMSM drives), digital power conversion, sensor signal conditioning, and consumer appliances. The PIC24HJ128GP210A-I/PT is the -40C to +85C industrial-temperature variant in a TQFP-100 package, suitable for reflow soldering on standard SMT lines. When designing with this part, pay close attention to decoupling: place one 0.1 uF ceramic capacitor per VDD/AVDD pin and a 10 uF bulk capacitor near the MCU. Use the on-chip DMA for ADC-to-memory transfers to free CPU cycles and enable deterministic sampling at 500 ksps. This page combines distributor pricing from 11 sources, drop-in alternatives from the same PIC24H and dsPIC33F families, and practical design notes not found on the manufacturer datasheet front page.

見積もり お問い合わせ
PIC24HJ128GP210AT-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP210AT-I/PT

PIC24HJ128GP210AT-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP210AT-I/PT is a 16-bit PIC24H microcontroller with a 40 MIPS CPU, 128 KB (43K x 24) on-chip Flash program memory, and a 100-pin TQFP (12x12 mm) tape-and-reel package rated for the industrial -40C to +85C temperature range. It belongs to the PIC24H family of high-performance 16-bit microcontrollers designed for applications requiring fast, repetitive computations plus deterministic control. The device integrates 16 KB RAM, an 8-channel DMA, dual 16-channel 10/12-bit ADCs (up to 1.1 Msps), three 16-bit timers and a 16-bit 100-pin general-purpose configuration. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of on-chip peripherals such as ADCs, timers, communication controllers, and GPIO. Within the semiconductor taxonomy, an MCU is classified as: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC24HJ128GP210A specifically uses Microchip's 16-bit modified Harvard architecture with a single-cycle 40 MHz core, which delivers 40 MIPS of deterministic throughput that maps to higher-level requirements such as digital signal control, motor commutation, and power conversion feedback loops. Key differentiating features include 128 KB self-programmable Flash with code protection, four UART modules, two SPI modules, two I2C modules, two CAN 2.0B modules, a 9-channel 16-bit PWM, and an Enhanced Parallel Master/Slave Port (EPMP). These peripherals match the typical bill-of-materials of industrial drives, automotive body controllers, and grid-tied power-conversion stages. Architecturally, the PIC24HJ128GP210A shares pin compatibility with the dsPIC33F Digital Signal Controller family, allowing field-upgrade from MCU-only to DSP class within the same PCB footprint. The CPU executes instructions in a single clock cycle, the on-chip oscillator supports 7.5 MHz internal FRC with PLL, and the device operates from 3.0 V to 3.6 V. Power-management features include Doze, Idle, Sleep and Deep Sleep modes for low-power duty-cycled applications. Typical applications include industrial motor control (BLDC, PMSM, AC induction), switch-mode power supplies with digital control, sensor data acquisition systems, automotive body and chassis ECUs, CAN-based industrial networking nodes, and consumer appliances with TFT HMI. The large 128 KB Flash enables full protocol stacks such as CANopen or J1939, plus application logic, to run from a single chip. A key design consideration is that the 'AT' suffix denotes tape-and-reel packaging and industrial temperature grade, while the family is pin-compatible with dsPIC33F devices, simplifying future migration to DSP-based control. Designers should reference Microchip application notes on dsPIC33/PIC24 peripheral libraries to accelerate bring-up. This page synthesizes XAIPART pricing tiers, Microchip cross-references, drop-in alternatives, and design notes not found in a single distributor listing.

見積もり お問い合わせ
PIC24HJ128GP306-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306-I/PT

PIC24HJ128GP306-I/PT - 16-Bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306-I/PT is a 16-bit PIC24H general-purpose microcontroller delivering 40 MIPS (51.2 MHz core clock with 1:1.6 PLL ratio capable of 70 MIPS equivalent) from a 128 KB (43K x 24) Flash program memory in a 64-pin TQFP (10x10 mm) package. The part integrates 8 KB SRAM and operates across an industrial -40C to +85C temperature range, while the silicon itself supports 3.0V to 3.6V single-supply operation. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24H family uses a 16-bit modified Harvard RISC architecture with a 24-bit instruction word, occupying the mid-performance tier between Microchip's PIC24F and dsPIC33F/DSP families. Within the broader taxonomy, MCUs sit below microprocessors in capability but above bare logic ICs in integration, providing standalone programmability for embedded systems. Key features of the PIC24HJ128GP306-I/PT include up to 53 general-purpose I/O pins, a 16-channel 12-bit ADC with 500 ksps conversion rate, two UART modules, two SPI ports, two I2C ports, an ECAN 2.0B controller, and a Parallel Master Port (PMP). The 64-pin TQFP footprint exposes the full peripheral set, making this the largest pin-count variant in the GP306 sub-family. The PIC24HJ128GP306 uses a 5-stage pipeline with single-cycle multiplication and hardware divide, achieving 40 MIPS sustained throughput. Its peripherals are routed through a Peripheral Pin Select (PPS) mapping engine, allowing flexible assignment of digital functions to physical I/O pins without package redesign - a critical flexibility advantage over older fixed-pin PIC microcontrollers. Typical applications include industrial motor drives, power-conversion control loops, HVAC fan/pump controllers, building-automation nodes, automotive body and chassis ECUs, and CAN-connected sensor clusters where the on-chip ECAN 2.0B and 12-bit ADC simplify BOM and firmware development. When designing with this device, allocate sufficient PCB area for the 64-pin TQFP land pattern and follow Microchip's recommended decoupling scheme: a 10 uF bulk capacitor plus 0.1 uF ceramic per VDD/VSS pair. Firmware portability across the PIC24H/dsPIC33F families is a strong advantage for designers planning product variants. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes that complement the manufacturer datasheet. The 64-pin TQFP land pattern is shared across the entire PIC24HJ12xGP30x and PIC24HJ12xGP31x families, simplifying PCB reuse across product variants and firmware revisions.

見積もり お問い合わせ
PIC24HJ128GP306A-E/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306A-E/MR

PIC24HJ128GP306A-E/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306A-E/MR is a 16-bit, 40 MIPS RISC microcontroller from the PIC24H family, featuring 128 KB Flash, 16 KB RAM, and a 64-pin VQFN (9x9 mm) package with exposed thermal pad, qualified to the AEC-Q100 automotive standard and rated for the extended -40 °C to +125 °C temperature range. Operating from 3.0 V to 3.6 V, it integrates 53 digital I/O lines, 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 16-bit timer/capture/compare engine suitable for high-speed closed-loop control. A 16-bit microcontroller is a single-chip computer whose data path, registers and ALU are 16 bits wide; PIC24H devices in particular use a modified Harvard architecture with a 24-bit instruction word and a 16-bit data path, sitting in the product hierarchy 8-bit MCU (PIC16/PIC18) -> 16-bit MCU (PIC24) -> 16-bit DSC (dsPIC33) -> 32-bit MCU (PIC32). The PIC24HJ128GP306A is pin-compatible with the dsPIC33F family and offers seamless migration paths to PIC24F, dsPIC30F and dsPIC33F devices, which simplifies both upward (more peripherals / DSP) and downward (lower power) migrations on the same PCB footprint. Key features include a 40 MIPS execution speed from a 40 MHz oscillator with PLL, hardware multiplier for single-cycle MAC operations, and an enhanced CAN 2.0B module for automotive networking. The 64-pin VQFN (MR) variant offers an exposed thermal pad for improved heat dissipation in space-constrained automotive modules and industrial drives. Code security via program memory write protection and a unique device ID support anti-cloning, while the built-in 16-bit PWM with up to 9 outputs simplifies three-phase motor control and digital power conversion. Typical applications include automotive body and chassis ECUs, BLDC/PMSM motor drives, industrial control PLCs, sensorless field-oriented motor control, and high-speed digital signal conditioning. The combination of CAN, ample RAM and 12-bit ADC sample-and-hold makes it a strong fit for mechatronic subsystems that must meet AEC-Q100 stress tests. When designing with this device, follow the datasheet recommended decoupling scheme (100 nF on each VDD/VSS pair plus a bulk 10 µF) and use the exposed pad as the primary ground and thermal path; this part is supplied only in tube packaging per the manufacturer designation (-E = extended temp, /MR = VQFN-64).

見積もり お問い合わせ
PIC24HJ128GP306A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP306A-E/PT

PIC24HJ128GP306A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP306A-E/PT is a 16-bit RISC microcontroller from the PIC24H family, featuring 128 KB of Flash program memory and 16 KB of data RAM in a 64-pin TQFP (10x10 mm) package. It executes up to 40 MIPS at a 40 MHz CPU clock, providing high-performance deterministic control for embedded applications. What is a PIC24H microcontroller? The PIC24H is a 16-bit MCU family from Microchip Technology, positioned within the broader PIC24F/PIC24H/dsPIC33F product hierarchy as a high-performance general-purpose 16-bit controller. It uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, sitting between the lower-cost PIC24F and the DSP-capable dsPIC33F families. It belongs to the wider category of microcontrollers (MCU) within the integrated circuits and embedded systems ecosystem. Key features of the PIC24HJ128GP306A-E/PT include 128 KB Flash, 16 KB RAM, 53 programmable I/O lines, multiple 16-bit timers, DMA channels for CPU-offloaded data movement, and communication peripherals such as UART, SPI, and I2C. The device operates from 3.0 V to 3.6 V, supports -40C to +125C automotive-grade temperature range, and includes 10-bit and 12-bit ADC modules for mixed-signal acquisition. The -E suffix designates the extended (-40C to +125C) temperature grade, and /PT designates the 64-pin TQFP package. The architecture uses a 5-stage pipeline with single-cycle multiply, enabling 40 MIPS throughput at 40 MHz. The PIC24H family shares a very high degree of pin compatibility with the dsPIC33F family, allowing easy migration when DSP extensions are required. The integrated DMA engine supports parallel data transfer between peripherals and memory without CPU intervention, freeing CPU cycles for control-loop and communication tasks. Typical applications include industrial control systems, motor control (with companion dsPIC33F for FOC), automotive body and chassis ECUs, building automation, sensor interfacing, and consumer embedded products that need more performance than 8-bit MCUs but do not require full DSP capability. The 64-pin TQFP package also suits hand-solderable prototypes and low-volume production. When designing with this part, pay attention to the 3.3 V supply requirement and decoupling near each VDD/VSS pair. Use the in-circuit serial programming (ICSP) interface for firmware updates, and verify the trace length on high-speed communication lines. This page synthesizes distributor pricing, drop-in alternatives from the PIC24H/dsPIC33F family, and practical design notes not found in the manufacturer datasheet. For applications needing identical pinout with extended DSP capability, the dsPIC33FJ128GP306A-E/PT is a drop-in upgrade. For different memory density in the same 64-pin TQFP, the PIC24HJ256GP306A-E/PT and PIC24HJ64GP306A-E/PT are direct alternatives. The PIC24HJ128GP306A-E/MR (64-pin QFN) is the same die in a smaller package for space-constrained designs.

見積もり お問い合わせ
PIC24HJ128GP306A-I/MR - 40 MIPS 128KB Flash 16-bit MCU | Microchip
PIC24HJ128GP306A-I/MR

PIC24HJ128GP306A-I/MR - 40 MIPS 128KB Flash 16-bit MCU | Microchip

The Microchip PIC24HJ128GP306A-I/MR is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS at 40 MHz core clock, 128 KB of Flash program memory, and 16 KB of SRAM in a 64-pin QFN (MR) package with exposed thermal pad. It operates from 3.0 V to 3.6 V, targets general-purpose embedded control applications, and supports migration to the dsPIC33F signal-control family with which it shares pin compatibility. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC modules, communication interfaces (UART, SPI, I2C), and general-purpose I/O. The PIC24H belongs to the 16-bit MCU hierarchy (16-bit CPU -> microcontroller -> embedded computing -> semiconductor), using a modified Harvard architecture with a 16-bit data path and 24-bit instruction word for efficient C compilation and signal-processing headroom. Key features include 16-channel 12-bit ADC with 500 ksps conversion, multiple UART/SPI/I2C interfaces, 8-byte instruction cache, 16-bit timers with Input Capture and Output Compare, and an integrated mTouch capacitive touch peripheral. The 128 KB Flash supports self-programming, and the 64-pin QFN package provides extensive I/O with low thermal resistance for industrial temperature grade (-40C to +85C) operation. Architecturally, the PIC24H uses a pipelined 16-bit core with a deterministic interrupt model and single-cycle multiply, enabling responsive real-time control loops. The peripheral set is mapped through a Peripheral Pin Select (PPS) that allows flexible remapping of digital functions to physical pins, simplifying PCB layout versus fixed-pin microcontrollers. Typical applications include industrial motor control, digital power conversion, sensor interfacing, building automation, point-of-sale terminals, and general-purpose embedded control where 16-bit arithmetic, USB-ready peripherals, and DSP-style signal handling are required. The PIC24H's pin compatibility with the dsPIC33F enables code reuse when DSP functionality is later needed. When designing with this device, plan oscillator and ICSP layout early because the PIC24HJ128GP306A requires dedicated PGECx/PGEDx pairs for in-circuit programming; any pair may be used, but both signals must share the same pair index. Brown-Out Reset and Watchdog Timer settings should be configured at the firmware level to match the application power profile. This page synthesizes distributor pricing, parametric specifications, drop-in alternatives, and PCB design notes not aggregated in the manufacturer datasheet or single distributor listings.

見積もり お問い合わせ