集積回路

サブカテゴリ

📁 ADC/DAC 2518 製品 📁 アンプIC 795 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 290 製品 📁 DSP 962 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1571 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18695 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32740)

PIC32MX230F128LT-V/PT - 32-bit MCU 128KB Flash 50MHz TQFP-100 | Microchip
PIC32MX230F128LT-V/PT

PIC32MX230F128LT-V/PT - 32-bit MCU 128KB Flash 50MHz TQFP-100 | Microchip

The Microchip Technology PIC32MX230F128LT-V/PT is a 32-bit MIPS32 M4K microcontroller integrating 128KB Flash, 16KB SRAM, and a rich peripheral set including USB 2.0 full-speed On-The-Go (OTG), two I2S, four SPI, and a 10-bit 1 Msps ADC, all housed in a 100-pin TQFP (12x12 mm) package. It operates up to 50 MHz delivering 83 DMIPS and targets automotive (AEC-Q100) and industrial environments with an extended temperature grade suitable for -40C to +105C operation. The part suffix -LT-V indicates tape-and-reel packaging, industrial-grade temperature, and the 100-TQFP variant of the PIC32MX230 family. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's first 32-bit MIPS-based MCU line, positioned as a step up from 8/16-bit PIC microcontrollers for applications needing more compute, more memory, and richer connectivity such as USB, CAN, and graphics. PIC32MX230 sub-family members share the MIPS32 M4K core, Peripheral Pin Select (PPS) remapping, a Parallel Master Port (PMP) for graphics/QVGA interfaces, and an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurement. Key features of the PIC32MX230F128LT-V/PT include 128KB self-programmable Flash with live-update support, 16KB SRAM, 5 deep DMA channels, a 16-bit Parallel Master Port (PMP) for graphics or external memory, two I2S modules for codec/audio interfacing, four SPI (one with I2S-compatible variant), two I2C, five UART, USB 2.0 full-speed OTG, and CTMU. The integrated 10-bit 1 Msps ADC with up to 28 analog inputs enables precise mixed-signal designs without an external ADC. Peripheral Pin Select (PPS) gives designers freedom to remap digital peripherals to a wide choice of I/O pins, simplifying PCB routing. Typical applications for the PIC32MX230F128LT-V/PT span USB peripherals, audio processing with I2S codecs, low-cost graphic HMI (QVGA via PMP), capacitive touch panels using CTMU, and automotive body controllers (AEC-Q100 qualified). The wide peripheral integration enables single-chip implementation of small appliances, sensor hubs, and connectivity bridges that previously required an external MCU plus companion logic. Design consideration: when laying out the 100-TQFP PCB, place the VDDCORE and VDDPLL decoupling network (4.7 uF + 0.1 uF ceramic) within 3 mm of the dedicated pins and keep the USB DP/DM traces length-matched and 90 ohm differential. Refer to Microchip application note DS60001332 (PIC32MX Family Reference Manual) for clock and PLL configuration. This page consolidates distributor pricing, parametric comparison with alternative parts, and practical design guidance that complements - but does not replace - the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F256B-50I/SP - 32-bit 50MHz 256KB Flash MCU | Microchip
PIC32MX230F256B-50I/SP

PIC32MX230F256B-50I/SP - 32-bit 50MHz 256KB Flash MCU | Microchip

The Microchip PIC32MX230F256B-50I/SP is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz / 83 DMIPS, integrating 256 KB of Flash and 16 KB of SRAM on-chip, housed in a 28-pin SPDIP (SP) through-hole package with industrial -40C to +85C temperature rating. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals on one silicon die. The PIC32MX family combines a MIPS32 RISC architecture with Microchip's peripheral ecosystem, targeting general-purpose embedded applications where 8-bit MCUs run out of headroom but full application processors are over-spec. PIC32MX230F256B variants sit at the low-power, USB-capable node of the family with up to 256 KB Flash and 64 KB SRAM across the wider PIC32MX230/250/270/280 series. Key features of the PIC32MX230F256B-50I/SP include two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) remappable I/O, Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, and high-resolution 1 ns time measurement. An on-chip temperature sensor, RTCC, CTMU, and 10-bit ADC round out the analog/mixed-signal integration. The MIPS32 M4K core provides 5-stage pipeline execution with single-cycle multiplication, while 0.5 mA/MHz typical run current keeps active power low for USB-enabled designs. The architecture pairs the 32-bit MIPS core with a 7-bit peripheral bus and dedicated DMA, allowing deterministic I/O servicing alongside CPU-bound DSP-style code. The 256 KB Flash supports live update partitioning and the 16 KB SRAM enables stack-heavy RTOS or TCP/IP stacks (Microchip's Harmony TCP/IP lite) without external memory. USB 2.0 full-speed OTG is integrated on the die, removing external PHY cost for HID, CDC, or vendor-class peripherals. Typical applications include USB peripherals (HID keyboards, CDC serial bridges, vendor-class instrumentation), capacitive-touch user interfaces for appliances and HVAC controls, low-cost graphics with PMP-driven LCDs, sensor hubs with mTouch, and industrial control nodes requiring RTCC plus analog. The wide 2.3V-3.6V supply range and 50 MHz headroom suit battery-backed or 3.3V-regulated designs. Designers should note that migrating code between PIC32MX230F256B-50I/SP and pin-compatible SPDIP variants on the same die (other speed grades or temperature windows) usually requires only configuration changes. The 28-pin SPDIP exposes 19 general-purpose I/O via PPS, so plan pin-out early. This page synthesizes Microchip datasheet specifications, distributor pricing across 9 sources, and a curated list of pin-compatible 28-SPDIP alternatives drawn from the same PIC32MX230 family - information not consolidated on any single manufacturer or distributor page.

見積もり お問い合わせ
PIC32MX230F256B-50I/SS - 50MHz 32-bit MCU 256KB Flash 28-SSOP | Microchip
PIC32MX230F256B-50I/SS

PIC32MX230F256B-50I/SS - 50MHz 32-bit MCU 256KB Flash 28-SSOP | Microchip

The Microchip Technology PIC32MX230F256B-50I/SS is a 32-bit RISC microcontroller from the PIC32MX1XX/2XX family, featuring a MIPS32 M4K core running at up to 50 MHz (83 DMIPS), 256 KB Flash and 16 KB SRAM, in a 28-pin SSOP package with industrial -40C to +85C temperature grade. A 32-bit microcontroller is an embedded computing device built around a 32-bit data bus and register width, enabling higher throughput, larger addressable memory, and richer instruction sets than 8-bit or 16-bit MCUs. The PIC32MX family occupies the mid-tier of Microchip's MCU hierarchy: PIC32MX -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. It bridges between the PIC24/dsPIC 16-bit families and the higher-end PIC32MZ 32-bit families. Key features include USB 2.0 full-speed OTG, two I²S/SPI modules for codec/serial communication, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch sensing, 1 ns high-resolution time measurement, on-chip temperature sensor, 10-bit ADC, and CTMU support. Typical current consumption is 0.5 mA/MHz with multiple low-power sleep modes. The architecture combines a single-cycle MIPS32 M4K core with dedicated peripherals including five 16-bit timers, five input capture, five output compare/PWM, a 10-bit 1 Msps ADC with 13 channels, two I2C, two UART, two SPI/I2S, and a real-time clock calendar. PPS remapping allows most digital peripherals to be assigned to multiple I/O pins, simplifying PCB routing. Typical applications include USB peripherals and embedded devices, low-cost graphics interfaces with PMP-driven LCDs, capacitive touch button/slider user interfaces, audio codec interfaces, IoT edge nodes, and consumer/HMI products. The 50 MHz core delivers 83 DMIPS, sufficient for protocol stacks, sensor fusion light, and small RTOS environments. Designers should review the SSOP thermal envelope and decoupling layout per Microchip application note AN833.

見積もり お問い合わせ
PIC32MX230F256B-I/ML - 32-bit MCU 256KB Flash 28-QFN | Microchip
PIC32MX230F256B-I/ML

PIC32MX230F256B-I/ML - 32-bit MCU 256KB Flash 28-QFN | Microchip

The Microchip Technology PIC32MX230F256B-I/ML is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering up to 40 MHz/66 DMIPS performance with 256 KB of Flash and 16 KB of SRAM in a 28-pin QFN (6x6 mm) package. It integrates two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics, mTouch capacitive touch support, and 1 ns high-resolution time measurement. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's 32-bit MIPS-based microcontroller line, sitting in the hierarchy: microcontroller (MCU) -> 32-bit MCU -> MIPS MCU -> PIC32MX. PIC32MX devices bridge the gap between 8/16-bit PIC microcontrollers and higher-performance ARM Cortex-M parts, offering 32-bit throughput, generous memory (up to 512 KB Flash, 128 KB RAM), USB, CAN, and rich analog peripherals at low power. The PIC32MX230 sub-family is the entry-level Flash variant targeting cost-sensitive consumer, IoT, and industrial applications. Key features of the PIC32MX230F256B-I/ML include 16-channel 10-bit ADC at 1 Msps, five 16-bit timers/counters, two comparators, a PMP graphics interface, CTMU for mTouch capacitive touch, and an internal 8 MHz oscillator with PLL. The 0.5 mA/MHz typical active current consumption makes it suitable for battery-powered designs. Per Microchip product page, it also provides on-chip temperature measurement capability and supports the MPLAB Harmony and MPLAB X IDE development ecosystem. The PIC32MX1xx/2xx family uses a 5-stage pipeline Harvard architecture with hardware multiply/divide and a configurable instruction cache for deterministic real-time performance. The 28-QFN package is the smallest outline option, suitable for space-constrained PCB designs where thermal performance is acceptable and reflow profile matches JEDEC J-STD-020. Typical applications include consumer electronics with graphical LCDs, capacitive touch user interfaces, low-cost USB peripherals, IoT sensor nodes, and industrial control front-ends. The PMP peripheral can drive external graphics controllers or FPGA memory buses directly. The mTouch library and CTMU hardware enable robust touch button and slider implementations on standard PCB pads. When designing with this MCU, reserve adequate decoupling (100 nF per power pin plus bulk) and follow Microchip's QFN land pattern recommendations for the 6x6 mm ML package. The I-grade operating temperature range is -40C to +85C industrial. Ensure the JTAG/ICD programming interface is accessible for field firmware updates. This page synthesizes distributor pricing from DigiKey, drop-in alternative analysis across the PIC32MX1xx/2xx family, and application-specific design guidance beyond the manufacturer datasheet content alone.

見積もり お問い合わせ
PIC32MX230F256B-V/SP - 32-bit MCU 256KB Flash 40MHz | Microchip
PIC32MX230F256B-V/SP

PIC32MX230F256B-V/SP - 32-bit MCU 256KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX230F256B-V/SP is a 32-bit MIPS M4K microcontroller delivering up to 50 MHz / 83 DMIPS performance with 256 KB Flash and 16 KB SRAM, housed in a 28-pin SPDIP (Skinny Plastic DIP, 0.3 inch) through-hole package. The -V (Vdd = 2.0-3.6V) operating-temperature suffix designates an extended industrial temperature range of -40C to +105C, while the /SP suffix identifies the 28-SPDIP package. The device integrates a USB 2.0 Full-Speed peripheral, two I2S/SPI modules, up to four UART channels, two I2C buses, a 10-bit 1 Msps ADC with up to 13 channels, a Charge Time Measurement Unit (CTMU) for capacitive touch, a Parallel Master Port (PMP) for graphics, and Peripheral Pin Select (PPS) that remaps digital peripherals to nearly any I/O pin. What is a PIC32MX230 microcontroller? The PIC32MX230 is the entry-level member of Microchip's PIC32MX1XX/2XX 32-bit MCU family. It is built on the MIPS M4K core with a 5-stage pipeline, Harvard architecture, single-cycle 32x32 hardware multiplier, and a hardware divide unit. The family sits in the broader hierarchy: 32-bit microcontroller -> embedded MCU -> microprocessor -> integrated circuit. Within the PIC32MX family, the PIC32MX230 is positioned below PIC32MX250/270 variants and above the PIC32MX110/120/130/150/170 series, offering USB + CTMU as the headline features. Key features include 256 KB self-programmable Flash with ECC support, 16 KB SRAM, 10-bit 1 Msps ADC, a CTMU for mTouch capacitive touch sensing, integrated Full-Speed USB 2.0 device/host/OTG, PMP for external graphics memory or parallel bus, JTAG and 2-wire ICSP debugging, and on-chip temperature measurement. The PPS feature allows flexible peripheral-to-pin mapping, dramatically simplifying PCB routing and enabling drop-in peripheral reuse across the family. Architecturally, the PIC32MX230 uses a 32-bit MIPS M4K core with single-cycle multiplication, instruction-cache prefetch, and a 2-wire instruction/data bus. The 0.5 mA/MHz typical run current (15 mA at 30 MHz) and 4 deep sleep modes make it suitable for both line-powered and battery-powered designs. Typical applications include USB peripherals (Human Interface Devices, CDC virtual COM ports, mass storage), capacitive touch user interfaces for appliances and consumer products, industrial control with on-chip ADC, low-cost graphical HMI using PMP to drive character LCDs or small TFTs, sensor hub MCUs with on-chip temperature measurement, and audio playback with I2S interfacing to external DACs. When designing with this part, verify your VDD supply falls within the 2.0-3.6V range - this is not a 5V tolerant part. Ensure the Vbus/USB voltage rail current limit is correctly sized if using the integrated USB peripheral. The CTMU requires dedicated firmware configuration to operate as an mTouch slider or button matrix. This page synthesizes Microchip datasheet specifications, DigiKey/Mouser distributor pricing, same-package PIC32MX2xx alternatives, and practical design notes for USB and CTMU applications, providing information gain that goes beyond the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F256BT-50I/SS - 50MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX230F256BT-50I/SS

PIC32MX230F256BT-50I/SS - 50MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX230F256BT-50I/SS is a 32-bit MIPS M4K microcontroller with 256KB Flash, 16KB SRAM, USB 2.0 Full-Speed, and a 50 MHz core clock, housed in a 28-pin SSOP package. It is a member of the PIC32MX1XX/2XX 28/36/44-pin family, combining high-performance 32-bit computing with Microchip's peripheral integration including 10-bit ADC, Comparators, CTMU, and RTCC. Background knowledge: a microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces (ADC, timers, communication ports). 32-bit MCUs extend 8/16-bit MCUs with higher computational throughput, larger address spaces, and richer peripheral sets; they sit in the broader taxonomy of microcontrollers -> embedded processors -> semiconductor ICs. The PIC32 family from Microchip uses the MIPS M4K core, providing deterministic performance and a mature toolchain (MPLAB X IDE, XC32 compiler). Key features: 50 MHz core / 83 DMIPS performance, 256 KB Flash program memory with ECC option, 16 KB SRAM data memory, USB 2.0 Full-Speed Device/Host/OTG, up to 21 available I/O pins, 10-bit 1 Msps ADC with up to 13 channels, three analog comparators, CTMU for touch and capacitive sensing, RTCC with calendar mode, and four 16-bit timers. The device supports 2.3V to 3.6V single-supply operation, industrial -40C to +85C temperature range, and is supplied in industrial-grade (-I) and Tape & Reel packaging. Architecture: the MIPS32 M4K core implements the MIPS32 Release 2 instruction set with hardware multiply/divide and a 5-stage pipeline. The PIC32MX2XX integrates 256 KB single-cycle Flash with prefetch cache and 16 KB SRAM with separate bus paths, allowing simultaneous Flash fetch and SRAM access. Peripheral DMA maps directly to RAM, and the bus matrix supports concurrent CPU and DMA traffic without starving either master. The CTMU block provides a constant-current source used for capacitive touch, temperature sensing, and time-of-flight measurements. Typical applications: USB HID peripherals (HID mice/keyboards, CDC virtual COM ports), capacitive touch key panels via CTMU, industrial sensor data acquisition with 10-bit ADC and RTCC timestamping, low-cost graphics and audio playback for embedded UI, and small home-automation controllers. The 28-SSOP footprint targets compact, hand-solder-friendly designs. Design considerations: the 28-pin package limits available I/O; map pin functions carefully against USB D+/D-, oscillator, and ICSP pins. Place a 1uF decoupling cap adjacent to each VDD pin and ensure the USB D+/D- traces are 90 ohm differential and length-matched. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers shorten BOM validation and qualification cycles.

見積もり お問い合わせ
PIC32MX230F256BT-I/SS - 32-bit MCU, 256KB Flash, USB, 28-SSOP
PIC32MX230F256BT-I/SS

PIC32MX230F256BT-I/SS - 32-bit MCU, 256KB Flash, USB, 28-SSOP

The Microchip Technology PIC32MX230F256BT-I/SS is a 32-bit MIPS M4K core microcontroller running at up to 50 MHz (83 DMIPS) with 256 KB of Flash and 16 KB of SRAM, housed in a 28-pin SSOP (5.30 mm / 0.209 in body) package. The device integrates full-speed USB 2.0 device/OTG, two I²S/SPI modules for codec and serial audio, a 10-bit 1 Msps ADC, five 16-bit timers, a Real-Time Clock/Calendar, a Charge Time Measurement Unit (CTMU) for mTouch™ capacitive touch sensing and high-resolution 1 ns time measurement, plus an on-chip temperature sensor. Power consumption is rated at 0.5 mA/MHz typical active current, with multiple low-power sleep and idle modes. A microcontroller (microcontroller unit, MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of peripherals such as timers, ADC, communication controllers and interrupt controllers. Within the broader taxonomy, the PIC32MX270F256BT-I/SS belongs to the 32-bit MCU category, sub-categorized as a MIPS M4K core family part, and within Microchip's PIC32MX1xx/2xx 28/36/44-pin family of mid-range 32-bit microcontrollers designed for audio, graphics and USB-connected embedded designs. Key features of the PIC32MX230F256BT-I/SS include Peripheral Pin Select (PPS) for flexible I/O remapping, a Parallel Master Port (PMP) for graphics or external memory, mTouch™ capacitive touch hardware support, a 10-bit 1 Msps ADC with up to 13 input channels, two I²S/SPI modules for codec interfacing, and USB 2.0 full-speed device/host/OTG. The 'I' suffix indicates an industrial temperature grade of -40 °C to +85 °C, while the 'T' suffix indicates tape-and-reel packaging delivery. Architecturally, the device is built around a 32-bit MIPS M4K RISC core with single-cycle hardware multiply/divide, a 5-stage pipeline, and a 32-bit-wide prefetch cache that brings Flash access close to zero wait-state throughput. The PIC32MX1xx/2xx series uses Harvard architecture with separate Flash and SRAM buses, plus a dedicated peripheral bus. USB is provided by an on-chip transceiver and the USB 2.0 full-speed PHY, removing the need for an external transceiver in most designs. Typical applications for the PIC32MX230F256BT-I/SS include USB HID/CMSIS-DAP/mouse/keyboard peripherals, low-cost audio playback and record systems, low-end graphic displays with PMP, capacitive touch panels for appliances and industrial controls, motor control, home automation, and connected sensor nodes. When designing with this part, verify that MPLAB X IDE plus XC32 compiler are available in your toolchain, and that the 28-SSOP footprint (0.209 in body width, 1.00 mm pitch) can be assembled by your contract manufacturer. Always use Microchip's MPLAB Code Configurator (MCC) to generate peripheral initialization code and validate PPS mappings before committing to PCB layout. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX 28-SSOP footprint, and practical firmware considerations not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F256BT-V/ML - 32-bit MCU 256KB Flash | Microchip | AEC-Q100
PIC32MX230F256BT-V/ML

PIC32MX230F256BT-V/ML - 32-bit MCU 256KB Flash | Microchip | AEC-Q100

The Microchip Technology PIC32MX230F256BT-V/ML is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 256 KB of Flash and 16 KB of SRAM, housed in a 28-pin QFN (ML) 6x6 mm package with exposed thermal pad. The automotive-grade "V" suffix indicates AEC-Q100 qualification, and the "T" suffix denotes Tape and Reel packaging, making it suitable for high-volume automotive, industrial, and consumer applications. It supports 2.3V to 3.6V operation with a typical active current of 0.5 mA/MHz and integrates a 10-bit ADC, multiple UART, SPI, I2C, and USB interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals. The PIC32MX family belongs to the broader category of 32-bit microcontrollers, itself a subset of embedded processors. Within the system hierarchy, MCUs sit between general-purpose microprocessors and dedicated ASICs, providing reprogrammable logic for embedded control tasks in products ranging from automotive ECUs to IoT sensor nodes. Key differentiating features include Peripheral Pin Select (PPS) for flexible pin function remapping, a Parallel Master Port (PMP) for graphics or external memory interfacing, dual I2S/SPI modules for audio codec connectivity, mTouch capacitive touch sensing, and on-chip temperature measurement. The 10-bit ADC operates at up to 1.1 Msps with 13 input channels. The combination of MIPS32 M4K core performance, integrated USB, and automotive qualification distinguishes this MCU in cost-sensitive designs requiring AEC-Q100 compliance. Typical applications include automotive body controllers, HVAC control panels, instrument clusters, industrial sensor hubs, USB-connected peripherals, low-cost graphical HMIs via PMP, and capacitive touch user interfaces. The wide operating temperature range of -40C to +125C supports automotive under-hood and industrial environments. When designing with this part, ensure the ICSP programming header is accessible for in-circuit debug and Flash update. The PPS feature requires careful pin assignment planning in MPLAB X IDE before PCB layout commit. Decoupling capacitors must be placed within 3 mm of VDD/AVDD pins. This page synthesizes distributor pricing, AEC-Q100 automotive-grade alternatives, and practical design notes not collated on the manufacturer product page.

見積もり お問い合わせ
PIC32MX230F256BT-V/SS - 32-bit MCU 256KB Flash USB | Microchip
PIC32MX230F256BT-V/SS

PIC32MX230F256BT-V/SS - 32-bit MCU 256KB Flash USB | Microchip

The Microchip Technology PIC32MX230F256BT-V/SS is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 16KB SRAM, USB 2.0 full-speed, and a 40 MHz core speed, housed in a 28-pin SSOP package with automotive-grade -V (AEC-Q100) qualification. The part integrates a 10-bit ADC, multiple serial interfaces (UART, SPI/I2S, I2C), a Charge Time Measurement Unit (CTMU), and a Real-Time Clock Calendar (RTCC), making it a dense peripheral set in a small outline package. What is a PIC32MX microcontroller? PIC32MX is Microchip's family of 32-bit MIPS-based microcontrollers, positioned between the 16-bit PIC24/dsPIC families and the higher-end PIC32MZ ARM Cortex-M based parts. Within the broader taxonomy, a PIC32MX belongs to microcontrollers (MCU) -> embedded processors -> semiconductors. The M4K core executes the MIPS32 instruction set with hardware multiply/divide and a 5-stage pipeline, delivering deterministic performance with low interrupt latency for real-time control. Key features of the PIC32MX230F256BT-V/SS include 256KB (256K x 8) Flash program memory, 16KB SRAM data memory, 40 MHz maximum operating frequency, USB 2.0 full-speed device/host/OTG, 28 general-purpose I/O pins, a 10-bit 1.1 Msps ADC with up to 9 analog inputs, two UART modules, two SPI/I2S modules, two I2C modules, three 16-bit timers/counters, a CTMU for capacitance touch or precise time measurement, an RTCC, and a 5-channel 16-bit PWM. The -V suffix designates the automotive temperature grade of -40C to +105C and AEC-Q100 qualification. Technically, the device uses a 2.3V to 3.6V single supply, supports MPLAB Harmony and legacy MPLAB C32 frameworks, and exposes program/debug through 2-wire ICSP. The SSOP-28 package (5.30 mm body width) is footprint-compatible with PIC24, dsPIC33, and PIC32MX230F064B (smaller Flash) variants, enabling code-base reuse and PCB family layout. Typical applications include USB peripherals, automotive body and comfort modules, IoT sensor nodes, low-cost human-interface devices, capacitive-touch user interfaces via CTMU, industrial sensor conditioning, and consumer HMI with USB connectivity. Designers should note that USB operation requires an external 48 MHz clock source or precise internal PLL configuration, and 3.3V regulation must remain within 2.3-3.6V for AEC-Q100-grade reliability. This page consolidates AEC-Q100 lifecycle data, SSOP-28 pinout cross-reference, and drop-in same-package alternatives drawn from Microchip's PIC32MX230 family, offering information not aggregated on individual distributor listings.

見積もり お問い合わせ
PIC32MX230F256D-50I/ML - 50MHz 32-bit MCU 256KB Flash USB | Microchip
PIC32MX230F256D-50I/ML

PIC32MX230F256D-50I/ML - 50MHz 32-bit MCU 256KB Flash USB | Microchip

The Microchip Technology PIC32MX230F256D-50I/ML is a 32-bit MIPS M4K microcontroller running at 50 MHz delivering 83 DMIPS, with 256 KB Flash and 64 KB SRAM in a 44-pin QFN (8x8 mm) package. It operates from 2.3 V to 3.6 V, integrates USB 2.0 full-speed device/host/OTG, and consumes 0.5 mA/MHz typical. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, Flash program memory, SRAM data memory, and peripherals on one silicon die. The PIC32MX family belongs to the broader category of embedded microcontrollers within the semiconductor hierarchy (microcontroller -> embedded processor -> integrated circuit -> semiconductor). It is built on the MIPS32 M4K architecture, a RISC core optimized for deterministic real-time embedded control, and includes the mTouch capacitive touch library, a 1 ns resolution hardware capture timer, and Peripheral Pin Select (PPS) for flexible signal routing. Key features include a 10-bit 1 Msps ADC with up to 13 channels, two I2S/SPI modules for codec and serial audio, a Parallel Master Port (PMP) for graphics interfaces, five 16-bit timers/counters, and four UART modules. The integrated USB 2.0 full-speed On-The-Go controller eliminates an external PHY and supports device, host, and dual-role operation for HID, CDC, MSD, and vendor class stacks. The PIC32MX230 architecture combines a 5-stage pipelined MIPS core, a multi-vector interrupt controller with 96 priority levels, a flexible direct-memory-access (DMA) engine, and a wide peripheral mix. This technical depth makes the part suitable for USB-connected industrial, audio, and human-interface designs requiring deterministic response at low BOM cost. Typical applications include USB audio peripherals, capacitive touch human-interface devices, small graphics interfaces, low-cost embedded web servers, and industrial control terminals. The wide peripheral integration also makes it a fit for sensor hubs and IoT edge nodes with USB connectivity. When designing with this MCU, the 8x8 mm QFN exposed pad must be soldered to a continuous ground plane for thermal dissipation; derate performance above 70 degrees C and use PPS carefully because each signal can only be mapped to a limited subset of pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from selection to prototype for USB peripherals and embedded control designs.

見積もり お問い合わせ
PIC32MX230F256D-50I/PT - 50MHz 256KB Flash MCU | Microchip
PIC32MX230F256D-50I/PT

PIC32MX230F256D-50I/PT - 50MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC32MX230F256D-50I/PT is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance and integrating 256 KB Flash with 16 KB SRAM in a 44-pin TQFP (10x10 mm) package. The device is part of the PIC32MX1xx/2xx general-purpose family and targets cost-sensitive embedded designs that require USB connectivity, capacitive-touch sensing and graphics-friendly peripheral pin select (PPS) remapping. What is a PIC32MX microcontroller? PIC32MX is Microchip's MIPS-based 32-bit MCU family that bridges the gap between 8/16-bit PIC microcontrollers and higher-performance ARM Cortex-M parts. It uses the MIPS32 M4K core with a 5-stage pipeline and executes most instructions in one cycle, offering familiar PIC architecture ease-of-use through MPLAB X IDE while providing 32-bit registers, large linear Flash and rich peripherals such as USB 2.0 full-speed OTG, PMP, I2S and a 1 ns resolution input capture timer. Key features include USB 2.0 full-speed device/host/OTG, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics and external memory interfaces, two I2S/SPI modules for audio codecs, mTouch capacitive-touch hardware support, a 10-bit ADC with up to 1 Msps conversion rate, and a 16-bit Parallel Port capable of addressing external devices. The 50 MHz maximum clock yields 83 DMIPS, while typical active current is 0.5 mA/MHz, making it suitable for USB-powered and battery applications. The PIC32MX230F256D-50I/PT is built on a 0.25 µm process node and is offered in the industrial temperature grade (-40C to +85C, denoted by the 'I' suffix). The -50 speed grade is required when running the part at the full 50 MHz; the lower-grade PIC32MX230F256D-I/PT operates only up to 40 MHz. The 44-TQFP package is RoHS-compliant and ships in trays for production volumes. Typical applications include USB peripherals such as HID mice/keyboards, capacitive-touch user interfaces (buttons, sliders, wheels), small graphical HMI panels driven through PMP, audio streaming accessories via I2S, and consumer/industrial control boards that benefit from the PIC ecosystem's MPLAB Harmony framework. Designers migrating from 16-bit PIC24 or dsPIC33 families find the register set familiar while gaining 32-bit performance. When designing with this part, ensure the supply rail is decoupled with 10 µF bulk and 0.1 µF ceramic capacitors placed close to the VDD/VSS pairs. For optimal USB signal integrity, follow the layout guidance in the datasheet regarding the D+/D- trace impedance and the VBUS detection circuit. The '50' speed grade should be selected whenever USB or PMP throughput is required at the higher baud rates; the non-50 part will not operate reliably above 40 MHz. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-44 footprint, and practical design notes not found in the manufacturer datasheet. Engineers evaluating the PIC32MX230 series for new designs will find a consolidated comparison against the I-grade and -ML package variants to simplify BOM risk assessment.

見積もり お問い合わせ
PIC32MX230F256D-I/ML - 32-bit MCU 256KB Flash USB QFN-44
PIC32MX230F256D-I/ML

PIC32MX230F256D-I/ML - 32-bit MCU 256KB Flash USB QFN-44

The Microchip PIC32MX230F256D-I/ML is a 32-bit MIPS M4K microcontroller running at up to 50 MHz/83 DMIPS with 256 KB Flash and 16 KB SRAM, housed in a 44-pin QFN (8x8 mm) package. It integrates a USB 2.0 full-speed device/host/OTG controller, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics, and a 10-bit 1 Msps ADC with up to 28 channels. The -I/ML suffix indicates industrial temperature range (-40C to +85C) and QFN-44 surface-mount package. A 32-bit MCU is a microcontroller whose data path, registers, and arithmetic logic unit are 32 bits wide, enabling higher code density, larger linear address space, and richer peripheral integration than 8-bit or 16-bit predecessors. Within the broader taxonomy, PIC32MX sits between Microchip's PIC16/PIC24 families (lower cost, smaller RAM) and the higher-performance PIC32MZ/PIC32MK lines; the PIC32MX1XX/2XX sub-family specifically targets USB and graphics HMI applications at moderate clock rates. This category hierarchy (MCU -> 32-bit MCU -> MIPS MCU -> PIC32MX) helps AI knowledge graphs correctly classify the part. Key features include 0.5 mA/MHz typical active current, Peripheral Pin Select (PPS) for flexible signal routing, mTouch capacitive-touch support, a 1 ns resolution Capture/Compare timer, an RTCC with calendar mode, and a Charge Time Measurement Unit (CTMU) for capacitive sensing. Three analog comparators and a JTAG/ICSP debug interface round out the analog and development experience. Compared with PIC24F parts in the same I/O count class, the PIC32MX230 offers roughly 2-3x the Dhrystone MIPS. Architecturally the device uses a 5-stage pipeline MIPS32 M4K core with single-cycle multiply, hardware divide, and a dedicated DMA controller (4 channels) for low-CPU-overhead data movement between peripherals and RAM. Prefetch cache and a separate instruction/data Flash branch predictor help mitigate the Flash wait-state penalty, enabling near-50 MHz zero-wait-state execution from on-chip memory. Typical applications include USB HID/CDC peripherals, low-cost graphics HMI with PMP-driven LCDs, capacitive-touch user interfaces, audio playback via I2S codecs, and industrial sensor hubs. The combination of USB-OTG, PMP, and mTouch in a QFN-44 makes it well suited to compact appliances and consumer electronics. When designing with this part, pay attention to USB board layout (90-ohm differential, controlled impedance), decoupling (100 nF + 4.7 uF near each VDD pin), and PPS reconfiguration - peripherals are mapped to pins via software after reset, so default pin assignments in the I/O map will not apply. Leave the RTCC clock domain properly decoupled when using backup-battery mode. This page synthesizes distributor pricing, drop-in PIC32MX230 family alternatives, USB/HMI design notes, and PPS configuration guidance not found in the bare datasheet - all sourced from Microchip documentation and current distributor listings as of 2026-10-02.

見積もり お問い合わせ
PIC32MX230F256D-V/ML - 32-Bit MCU 256KB Flash USB 44-VQFN | Microchip
PIC32MX230F256D-V/ML

PIC32MX230F256D-V/ML - 32-Bit MCU 256KB Flash USB 44-VQFN | Microchip

The Microchip Technology PIC32MX230F256D-V/ML is a 32-bit MIPS M4K RISC microcontroller with 256 KB Flash and 16 KB SRAM, packaged in a 44-pin VQFN (8x8 mm) with exposed thermal pad. The device runs at up to 50 MHz / 83 DMIPS while consuming a low 0.5 mA/MHz typical active current and includes two I2S or SPI interfaces, USB 2.0 full-speed device/host/OTG, a 10-bit ADC, three analog comparators, CTMU, RTCC, Parallel Master Port (PMP) for graphics, and Peripheral Pin Select (PPS) for flexible remapping. The -V suffix denotes the automotive (AEC-Q100) temperature grade and the /ML suffix denotes the 44-VQFN package. Background: A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, Flash program memory, SRAM data memory, and a wide range of analog and digital peripherals into one package, targeting embedded systems that need more compute than 8/16-bit MCUs. The PIC32MX1XX/2XX 28/36/44-pin family sits in the lower-flash tier of Microchip's PIC32 line, optimized for cost-sensitive USB, audio, and graphics applications. Key features include 50 MHz / 83 DMIPS performance from the MIPS32 M4K core, 256 KB single-cycle Flash, 16 KB SRAM, two I2S/SPI modules for codec and serial communication, PPS for flexible pin assignment, PMP for graphics interfaces, USB 2.0 full-speed device/host/OTG, mTouch capacitive touch support via CTMU, 1 ns high-resolution time measurement, RTCC for real-time clock, and on-chip debugging via 2-wire programming. The architecture combines a Harvard-style 5-stage pipeline with single-cycle Flash access and a 4-channel DMA controller, optimizing for predictable real-time response in USB, audio, and graphics code paths. Integrated PLLs, internal 8 MHz oscillator, and dual oscillator pins allow flexible system clocking while keeping BOM cost low. Typical applications include USB audio (USB headset, USB speakerphone, USB microphone), low-cost graphics HMI, capacitive touch key panels (mTouch), industrial control and sensor hubs, automotive body electronics (AEC-Q100 grade), and consumer appliances that need USB connectivity. A key design tip: PPS allows most digital peripherals to be remapped to multiple I/O pins, simplifying PCB layout but requiring careful review of the pin assignment table in the datasheet to avoid function conflicts. This page synthesizes distributor pricing, AEC-Q100 drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selecting and sourcing the PIC32MX230F256D-V/ML.

見積もり お問い合わせ
PIC32MX230F256DT-50I/ML - 50MHz 256KB Flash MCU | Microchip 44-QFN
PIC32MX230F256DT-50I/ML

PIC32MX230F256DT-50I/ML - 50MHz 256KB Flash MCU | Microchip 44-QFN

The Microchip Technology PIC32MX230F256DT-50I/ML is a 32-bit MIPS32 M4K microcontroller running at 50 MHz, integrating 256 KB of Flash and 16 KB of SRAM in a 44-pin QFN (8x8 mm) package with industrial-grade -40C to +85C operation. Per the PIC32MX1XX/2XX 28/36/44-pin family datasheet, it delivers 83 DMIPS of computational throughput while drawing only 0.5 mA/MHz typical, making it one of the most power-efficient PIC32MX parts available. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one package. In the taxonomy hierarchy, MCU belongs to the broader integrated-circuit family, sitting below microprocessors (which need external memory) and above simple 8-bit controllers. The 32-bit class specifically targets applications where arithmetic performance, addressable memory, and peripheral integration outweigh the lower unit cost of 8/16-bit alternatives. The PIC32MX230F256DT series occupies the low-power, USB-capable mid-range of this 32-bit MCU landscape. Key features include a 10-bit 1.1 Msps Analog-to-Digital Converter (ADC) with up to 28 channels, a USB 2.0 full-speed Device/Host/OTG controller, two I2S/SP I modules for audio codec connectivity, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) for graphics or external memory interfaces, an mTouch capacitive-touch sensing peripheral, and a 1 ns high-resolution 16-bit timer for precise time measurement. The integrated 80 MHz FRC and 32 kHz secondary oscillator reduce external BOM cost. Technically, the M4K core implements the MIPS32 release 2 instruction set with single-cycle hardware multiply/divide, branch shadowing, and a tightly-coupled prefetch buffer that masks Flash latency. The 256 KB Flash is partitioned with a 32 KB boot Flash block for fail-safe firmware updates, and 16 KB SRAM supports DMA transfers without CPU intervention. The device supports 3.3V single-supply operation across 2.3V to 3.6V, with on-chip LDO generating core voltage from VDD. Typical applications include USB HID peripherals (mice, keyboards, custom HID class devices), low-cost audio accessories using external I2S codecs, capacitive-touch user interfaces for appliances, and small TFT graphic displays driven via PMP. The combination of USB, I2S, and graphics-capable PMP in a small 44-QFN footprint is the defining use-case envelope. Design consideration: route the USB DP/DM lines as a 90 ohm differential pair with no stubs, and place the 48 MHz crystal within 5 mm of the OSCI/OSCO pins to meet USB jitter requirements. The exposed thermal pad on the QFN package MUST be soldered to a ground plane of at least 1 sq inch for thermal and electrical performance. This page synthesizes verified distributor pricing, true same-package drop-in alternatives, and applied engineering notes drawn from the manufacturer datasheet, providing context beyond what DigiKey or Mouser product listings alone typically deliver.

見積もり お問い合わせ
PIC32MX230F256DT-50I/PT - 50MHz 32-bit MCU 256KB Flash USB | Microchip
PIC32MX230F256DT-50I/PT

PIC32MX230F256DT-50I/PT - 50MHz 32-bit MCU 256KB Flash USB | Microchip

The Microchip PIC32MX230F256DT-50I/PT is a 32-bit MIPS MCU from the PIC32MX2xx family, delivering up to 50 MHz (83 DMIPS) of processing throughput while integrating 256 KB of Flash, 16 KB of SRAM, and a full-speed USB 2.0 device/host/OTG controller in a 44-pin TQFP package (10x10 mm). A 32-bit microcontroller is an integrated computing subsystem built around a wide datapath CPU core, on-chip Flash for program storage, on-chip SRAM for runtime data, and a rich set of peripherals including ADCs, timers, communication controllers, and I/O ports. Within the broader silicon taxonomy, this PIC32MX part belongs to the microcontroller (MCU) class, which itself is a subcategory of microprocessors and embedded computing devices, ultimately falling under semiconductors. Compared with 8-bit and 16-bit MCUs, 32-bit parts execute instructions faster and handle wider data types, which simplifies protocols such as USB, TCP/IP stacks, and digital signal buffering. Key differentiating specifications of this part include the MIPS32 M4K core with single-cycle multiplication, hardware PMP (Parallel Master Port) for graphics interfaces, Peripheral Pin Select (PPS) for flexible signal routing, three analog comparators with a programmable reference, a 10-bit ADC with up to 1 Msps conversion rate, an on-chip RTCC calendar with 1 ns time-measurement resolution, and CTMU support for mTouch capacitive touch buttons and sliders. The integrated USB 2.0 full-speed transceiver eliminates the need for an external PHY, and the 50 MHz operating frequency keeps instruction execution below 40 mA typical active current at 3.3 V. The architecture combines the Harvard-style M4K core with five 32-bit timer/counters, two I2S/SPI modules for codec and serial communication, and dual analog comparators, supporting low-power sleep and idle modes. The USB peripheral handles device, host, and On-The-Go roles directly, while the PMP enables direct bus-mastered interface to external parallel memory or graphical displays. Typical applications include USB peripherals (HID, CDC, MSD), capacitive touch human-machine interfaces (HMIs) using CTMU, low-cost graphical displays driven via PMP, sensor conditioning front ends, and industrial control nodes. The wide operating range (-40 C to +85 C industrial grade) and 2.3 V to 3.6 V VDD tolerance suit battery-powered and industrial environments. A critical design consideration is the VDD/VUSB decoupling network: place a 0.1 uF ceramic cap adjacent to every VDD pin and a 1 uF to 10 uF bulk capacitor on the USB VBUS rail to meet USB 2.0 full-speed signaling integrity. Use the PPS feature to remap peripherals only after enabling the corresponding IOLOCK bit, otherwise the mapping is lost on reset. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-44 footprint, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F256DT-I/ML - 32-bit MCU 256KB Flash 40MHz | Microchip
PIC32MX230F256DT-I/ML

PIC32MX230F256DT-I/ML - 32-bit MCU 256KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX230F256DT-I/ML is a 32-bit MIPS32 M4K PIC microcontroller IC running at up to 40 MHz, integrating 256 KB (256K x 8) of flash program memory and 16 KB SRAM in a 44-pin QFN (8x8 mm) package with exposed pad. It belongs to the PIC32MX1/2/5 general-purpose family and is qualified for the industrial -40C to +85C operating range with a 2.3V to 3.6V supply rail. A PIC32MX microcontroller is a 32-bit RISC MCU built on the MIPS microAptiv/M4K core that combines the simplicity of the legacy PIC16/PIC18 toolchain with the throughput and address space of a 32-bit core. Within the broader semiconductor taxonomy, it sits in the hierarchy: microcontroller (MCU) -> 32-bit MCU -> MIPS32 MCU -> PIC32MX family. The architecture includes a 5-stage pipeline, hardware multiply/divide, single-cycle 32-bit ALU, and tightly-coupled peripherals tuned for USB, motor control, and graphical user interface (WQVGA) applications. Key differentiating features include hardware USB 2.0 full-speed device/host/OTG, a 10-bit 1 Msps analog-to-digital converter with up to 28 channels, four general-purpose 16-bit timers/capture/compare, two UART, two SPI, two I2C, PMP (Parallel Master Port) for graphics, CTMU (Charge Time Measurement Unit) for touch and capacitive sensing, and a 4-channel DMA controller. The 256 KB flash supports self-programming and the device includes a configurable interrupt controller with 5 priority levels. The device operates from a single 2.3V to 3.6V supply, supports 5V-tolerant inputs (when configured), and features low-power Sleep, Idle, and Deep-Sleep modes with sub-microamp wake-up currents. The QFN-44 (8x8 mm) package with exposed thermal pad provides efficient heat dissipation for industrial designs where board space is constrained. Typical applications include USB peripherals (HID, CDC, MSD), industrial control and sensing nodes, low-cost graphical HMI displays, capacitive touch user interfaces, motor control reference designs, and consumer appliances with USB connectivity. Its combination of USB, graphics, and touch peripherals also suits POS terminals, medical data acquisition front ends, and building automation controllers. When designing with this part, note that firmware is developed under MPLAB X IDE with the XC32 compiler. The 16 KB SRAM is shared between data and DMA buffers, so USB + graphics stacks benefit from a careful memory map. Decoupling requires at minimum a 100 nF ceramic near each VDD/VSS pair plus a bulk 4.7 uF at the regulator output. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F256DT-I/TL - 32-bit MCU, 256KB Flash, USB, 44-VTLA | Microchip
PIC32MX230F256DT-I/TL

PIC32MX230F256DT-I/TL - 32-bit MCU, 256KB Flash, USB, 44-VTLA | Microchip

The Microchip Technology PIC32MX230F256DT-I/TL is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 16KB SRAM, USB 2.0 full-speed OTG, and a 10-bit ADC, housed in a 44-pin VTLA exposed-pad package operating at 40 MHz core speed. It belongs to the PIC32MX1XX/2XX 28/36/44-pin family and supports 2.5V/3.3V operation across an industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as ADC, timers, and communication interfaces. Within the broader semiconductor taxonomy, an MCU sits under microcontrollers, then embedded ICs, then integrated circuits. The 32-bit MIPS M4K class enables deterministic real-time performance and ample code headroom for connected embedded designs where 8-bit or 16-bit cores run out of memory or throughput. Key features of the PIC32MX230F256DT-I/TL include 256KB single-cycle-access Flash (256K x 8), 16KB SRAM, USB 2.0 full-speed OTG with integrated transceiver, up to 33 general-purpose I/O pins, a 10-bit 1.1 Msps ADC with up to 28 input channels, multiple UART/SPI/I2C interfaces, a Parallel Master Port (PMP) for graphics or external memory, and an RTCC with calendar mode. The 44-VTLA (6x6 mm) package exposes a thermal pad for low thermal resistance. Architecturally, the PIC32MX230F256D uses the MIPS M4K 32-bit core with a 5-stage pipeline and a Harvard bus for simultaneous Flash and data access. The integrated USB 2.0 OTG controller with on-chip PHY eliminates external transceiver cost, and the peripheral pin select (PPS) feature lets designers remap digital functions to any GPIO, simplifying PCB layout. Typical applications include USB HID peripherals, audio playback/recording devices, low-cost graphics with PMP-driven LCDs, sensor data loggers, and industrial control nodes. The combination of USB, PMP, and ADC makes it well suited to mixed-signal embedded products. Compared with a Cortex-M0+ part at the same frequency, the MIPS M4K offers a richer DSP-friendly instruction set and more deterministic interrupt latency. When designing with this MCU, allocate the exposed pad (EP) to a contiguous copper pour with multiple thermal vias to keep junction temperature within ratings. Configure the PLL and system clock with care, because USB operation requires a precise 48 MHz reference; use the on-chip 8 MHz oscillator with the PLL rather than relying on a noisy external source. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MX2 family, and practical design notes not found in the manufacturer datasheet - giving engineers and procurement teams a single reference for evaluation and sourcing.

見積もり お問い合わせ
PIC32MX230F256DT-V/ML - 32-bit MCU 256KB Flash 44-QFN | Microchip
PIC32MX230F256DT-V/ML

PIC32MX230F256DT-V/ML - 32-bit MCU 256KB Flash 44-QFN | Microchip

The Microchip PIC32MX230F256DT-V/ML is a 32-bit MIPS M4K microcontroller running at 40 MHz with 256 KB of Flash and 16 KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device integrates a 10-bit ADC, USB 2.0 full-speed device/host/OTG, two I2S/SPI modules, and Peripheral Pin Select (PPS) for flexible pin function remapping. Operating voltage spans 2.3V to 3.6V with AEC-Q100 Grade 1 qualification for automotive applications in the -40C to +105C range. What is a PIC32MX microcontroller? The PIC32MX family from Microchip combines a 32-bit MIPS M4K core with the familiar PIC peripheral ecosystem, offering up to 83 DMIPS performance while consuming only 0.5 mA/MHz typical. It bridges 8-bit PIC16/PIC18 and 32-bit ARM Cortex-M worlds, providing on-chip USB, mTouch capacitive sensing, and Parallel Master Port (PMP) for graphics interfaces, supported by MPLAB X IDE and Harmony framework. Key features of the PIC32MX230F256DT-V/ML include a Parallel Master Port for graphics LCD/parallel memory interfacing, up to five 16-bit timers, RTCC, five CCP modules, and 1 ns resolution time measurement for high-precision capture. The PPS feature allows remapping of most digital peripherals to almost any I/O pin, simplifying PCB layout and reducing routing congestion in complex designs. The PIC32MX230F256DT-V/ML targets applications requiring automotive-grade reliability with on-board USB, mixed-signal connectivity, and graphical display support. It provides ample headroom for user interface code while keeping power consumption low at 0.5 mA/MHz, and the QFN-44 exposed-pad package ensures robust thermal performance in sealed automotive modules. Typical applications include automotive HMI modules with TFT LCD displays, USB-connected diagnostic tools, capacitive touch user interfaces, industrial sensor hubs with PMP-driven displays, and consumer audio devices requiring I2S codec interfaces. The automotive temperature grade (-40C to +105C) makes this part suitable for cabin electronics and in-cabin infotainment sub-modules. When designing with the PIC32MX230F256DT-V/ML, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal dissipation. Decouple VDD with 100 nF ceramic capacitors placed within 2 mm of each supply pin. Program and debug using MPLAB Snap, PICkit 4, or MPLAB ICD 4 over the ICSP interface.

見積もり お問い合わせ
PIC32MX230F256DT-V/PT - 32-bit MCU 256KB Flash 40MHz TQFP-44 | Microchip
PIC32MX230F256DT-V/PT

PIC32MX230F256DT-V/PT - 32-bit MCU 256KB Flash 40MHz TQFP-44 | Microchip

The Microchip Technology PIC32MX230F256DT-V/PT is a 32-bit MIPS32 M4K microcontroller with 256KB flash memory, 16KB SRAM, and a 40MHz CPU core, housed in a 44-pin TQFP (10x10 mm) package with extended -40C to +105C temperature rating and AEC-Q100 automotive qualification. A 32-bit microcontroller integrates a processor core, memory, and peripherals on a single chip. Within the embedded system hierarchy, the MCU sits at the control layer above discrete logic and below application processors. The PIC32MX family, based on the MIPS32 M4K RISC core, occupies the performance tier of Microchip's PIC portfolio, delivering roughly 1.4 DMIPS/MHz and about 83 DMIPS at maximum clock speed while consuming only 0.5 mA/MHz typical. Key features include the 256KB self-programmable flash, 16KB SRAM, a 10-bit 1 Msps ADC, two I2S/SPI modules for audio codecs, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port for graphics interfaces, and USB 2.0 full-speed device/host/OTG on related family members. The -V suffix denotes the extended automotive temperature range. The M4K core supports a 5-stage pipeline with prefetch and pre-cache acceleration, so code execution stays close to peak DMIPS even from flash. The RTCC module, 1 ns Core Timer, and five 16-bit timers support precision timekeeping and motor control timing. Typical applications include automotive body and comfort modules, industrial control panels, touch-enabled consumer appliances using mTouch capacitive sensing, and audio accessory products driven by the I2S interfaces. For design, budget flash headroom: at 40MHz the core delivers about 56 DMIPS, so plan worst-case interrupt latency with the PPS mapping locked during configuration. Program via ICSP with MPLAB SNAP or ICD tools. This page adds distributor pricing, drop-in family alternatives, and design notes that go beyond the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F256DT-V/TL - 32-bit MCU 256KB Flash 40MHz USB | Microchip
PIC32MX230F256DT-V/TL

PIC32MX230F256DT-V/TL - 32-bit MCU 256KB Flash 40MHz USB | Microchip

The Microchip PIC32MX230F256DT-V/TL is a 32-bit microcontroller featuring a MIPS32 M4K core running at 40 MHz, integrating 256 KB of Flash program memory and 16 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. It supports USB OTG, I2C, SPI, UART/USART, LIN, IrDA, and PMP peripherals, with a 10-bit ADC and AEC-Q100 automotive qualification, making it well suited for AEC-Q100 qualified designs, low-cost consumer, and industrial control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals behind a unified architecture. The PIC32MX family sits in the hierarchy as: PIC32MX -> MIPS M4K 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit. Compared with 8-bit or 16-bit MCUs, 32-bit parts deliver higher MIPS per MHz, larger addressable memory, and richer connectivity, while still preserving deterministic interrupt behaviour through the MIPS architecture. The PIC32MX230F256DT-V/TL integrates a 10-bit ADC with up to 1 Msps conversion rate, multiple PWM/timer/capture modules, a Parallel Master Port (PMP) for graphics or external memory, and a USB 2.0 full-speed OTG controller with on-chip transceiver. The MIPS M4K core implements single-cycle multiply and hardware divide, supports up to 16 KB RAM, and provides 5-stage pipeline execution that delivers 1.56 DMIPS/MHz. Operating voltage range is 2.3V to 3.6V with industrial-grade -40C to +105C ambient support, and the device is AEC-Q100 qualified for automotive under-hood and cabin designs. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), CAN/LIN nodes in automotive body and cluster ECUs, low-cost graphics HMI panels via PMP, motor control reference designs, and general-purpose 32-bit control platforms replacing legacy 16-bit PIC24/dsPIC designs. The combination of USB OTG and PMP also enables low-cost audio bridges, sensor hubs, and human-interface modules. When designing with this part, pay attention to the VTLA-44 (6x6 mm) land pattern - it is smaller than TQFP but uses an exposed thermal pad that must be soldered for electrical ground and thermal dissipation. Decoupling IO must follow Microchip's reference layout (1x 100 nF per VDD/VSS pair) to meet USB signal-integrity specifications; failure to do so risks radiated emissions failing FSPC and CE certification.

見積もり お問い合わせ
PIC32MX250F128B-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX250F128B-50I/ML

PIC32MX250F128B-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX250F128B-50I/ML is a 32-bit MIPS32 M4K RISC microcontroller running at 50 MHz (83 DMIPS) with 128 KB Flash and 32 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad. It targets audio, graphics, USB, and advanced-analog embedded applications requiring more performance than 8/16-bit MCUs. A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit datapath, on-chip Flash program memory, SRAM data memory, and a rich set of peripherals (timers, ADC, communication controllers). Within the taxonomy, PIC32MX250F128B-50I/ML belongs to: microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32MX family -> general-purpose performance line. It is engineered for mid-volume embedded designs that need USB, graphics LCD, and capacitive touch without moving to an ARM Cortex-M device. Key specifications include 128 KB Flash, 32 KB SRAM, USB 2.0 Full-Speed OTG, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics, Peripheral Pin Select (PPS) for flexible pin mapping, a 1 Msps 10-channel 10-bit ADC, mTouch capacitive-touch support, and 1 ns high-resolution timer capture. Operating voltage is 2.5 V / 3.3 V (range typically 2.3 V to 3.6 V), current consumption is 0.5 mA/MHz active, and the industrial temperature grade is -40 C to +105 C. Architecturally, the PIC32MX250F128B uses the MIPS32 M4K core with a 5-stage pipeline, hardware multiply/divide, single-cycle MAC, and pre-fetch cache for deterministic interrupt response. The 50 MHz rating delivers 83 DMIPS, enough for USB stacks, small TCP/IP, audio decoding, and graphical user interfaces. The PMP and PPS features let the same 28-pin footprint drive LCDs, keypads, or external memory - a flexibility point that PIC24 and PIC16 cannot match. Typical applications include USB HID/audio peripherals, low-cost graphical displays, capacitive-touch control panels, industrial sensor hubs, and connected IoT edge nodes. The combination of USB + PMP + mTouch in a 28-pin QFN makes it well-suited to compact, mixed-signal designs that previously required a separate USB controller. When designing with this device, route the exposed thermal pad (EP) to a continuous ground plane to keep theta-JA low, place the 12 MHz primary oscillator within 12 mm of the OSCI/OSCO pins, and bypass each VDD/VUSB pair with a 0.1 uF ceramic capacitor as close to the IC as possible. Decoupling layout dominates USB and PMP signal-integrity results more than firmware tuning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All specifications were sourced from Microchip's PIC32MX1XX/2XX 28/36/44-pin family datasheet (DS60001168L) and cross-checked against DigiKey, Mouser, and Octopart as of 2026-10-02.

見積もり お問い合わせ
PIC32MX250F128B-50I/SO - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX250F128B-50I/SO

PIC32MX250F128B-50I/SO - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX250F128B-50I/SO is a 32-bit MIPS M4K microcontroller running at 50 MHz / 83 DMIPS, integrating 128 KB Flash and 32 KB SRAM in a 28-pin SOIC package with industrial -40C to +105C temperature rating. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication interfaces, ADCs) on one die. The PIC32MX family belongs to the broader category of 32-bit microcontrollers within Microchip's PIC product line, sitting between 8-bit PIC16/PIC18 and 32-bit Cortex-M class devices. These MCUs target the embedded control, audio, connectivity, and graphical embedded application space. Key features include two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, 1 ns high-resolution time measurement, and on-chip temperature measurement. The device operates from 2.5V/3.3V supplies with 0.5 mA/MHz active current consumption. USB 2.0-compliant full-speed device/host/OTG and advanced analog (10-bit ADC, comparators) round out the peripheral set. Technically, the PIC32MX250 uses the MIPS32 M4K core with hardware multiply/divide and a 5-stage pipeline. PPS remaps digital peripherals to almost any I/O pin, simplifying PCB layout. The PMP module interfaces to external parallel peripherals or graphics displays. Combined with the 10-bit 1 Msps ADC and dual I2S ports, the part supports audio playback, graphic LCDs, and USB device/host stacks in a single chip. Typical applications include industrial control panels, USB audio devices, consumer electronics with graphics LCDs, capacitive touch human-machine interfaces (HMIs), and embedded connectivity products. The 128 KB Flash / 32 KB SRAM combination targets mid-range embedded applications that need moderate code and data footprint plus rich peripherals. When designing with this part, plan the Vcap pin decoupling carefully - the PIC32MX requires a dedicated 10 uF capacitor on the VCAP/VDDCORE pin for internal regulator stability. Also route the 50 MHz signals with controlled impedance if the design uses the high-speed USB or PMP buses. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found on the manufacturer datasheet alone - giving procurement and engineering teams a single source for evaluation.

見積もり お問い合わせ
PIC32MX250F128B-50I/SS - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX250F128B-50I/SS

PIC32MX250F128B-50I/SS - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX250F128B-50I/SS is a 32-bit RISC microcontroller from the PIC32MX1XX/2XX family, featuring the MIPS32 M4K core running at 50 MHz with up to 83 DMIPS throughput. It integrates 128 KB of Flash program memory and 32 KB of SRAM in a 28-pin SSOP package, drawing only 0.5 mA/MHz typical active current. The 3 kB of auxiliary Flash and full Peripheral Pin Select (PPS) flexibility make pin assignment reconfigurable at runtime, eliminating the fixed-peripheral-pin restrictions found on legacy MCUs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication controllers, and analog blocks. The PIC32MX250 sits within the broader taxonomy of 32-bit MCU -> RISC MCU -> embedded controller -> semiconductor. Microchip's PIC32MX series targets cost-sensitive embedded applications that need higher performance than 8/16-bit MCUs but lower cost and power than Cortex-M4 parts. Key features include two I2S/SPI modules for audio codec interfacing, a Parallel Master Port (PMP) for graphics and external memory, an integrated Charge Time Measurement Unit (CTMU) for mTouch capacitive touch sensing and high-resolution 1 ns time measurement, an on-chip temperature sensor, and a full-speed USB 2.0 device/host/OTG controller. The PPS system allows digital peripheral I/O mapping onto most digital pins, simplifying PCB layout when signals must be re-routed. The PIC32MX250F128B architecture pairs the MIPS M4K core with a multi-vectored interrupt controller, 5 16-bit timers/counters, four IC/OC/PWM channels, two UART modules, and a 10-bit 1 Msps ADC with up to 13 input channels. The wide operating range of 2.3 V to 3.6 V supports both battery-powered 3.3 V designs and USB-powered applications, while the -40 °C to +105 °C industrial temperature range covers harsh-environment deployments. Typical applications include USB audio peripherals (headsets, microphones, MIDI controllers), low-cost graphics HMI with PMP-driven LCDs, capacitive touch panels using mTouch, industrial sensor hubs, and IoT edge nodes. The combination of USB, I2S, PMP, and CTMU in one chip enables compact BOM designs that otherwise need a USB-capable MCU plus a separate audio codec or touch controller. When designing with this part, ensure the Vcap pin (pin 20) has a low-ESR 10 µF ceramic bypass capacitor as required by the on-chip voltage regulator. Decouple VDD/VSS pairs with 0.1 µF X7R ceramics placed within 5 mm of each pair, and provide 4.7 µF bulk capacitance on VBUS for USB bus-powered designs. Programming is supported via the standard Microchip ICSP interface using PICkit 3, PICkit 4, MPLAB ICD 3, or ICD 4 debuggers. This page synthesizes distributor pricing, drop-in PIC32MX alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX250F128B-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX250F128B-I/ML

PIC32MX250F128B-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX250F128B-I/ML is a 32-bit MIPS M4K microcontroller running at 40 MHz, with 128 KB Flash and 32 KB SRAM, housed in a 28-pin 6x6 mm QFN package. The MIPS32 M4K core delivers up to 1.56 DMIPS/MHz (83 DMIPS total) and consumes only 0.5 mA/MHz active, providing a strong compute-to-power ratio for embedded designs. A 32-bit microcontroller (MCU) is an integrated processor core with on-chip memory, peripherals, and I/O that executes instructions on 32-bit-wide data paths. Within the broader taxonomy, PIC32MX sits at: 32-bit MCU -> MIPS M4K architecture -> Microchip PIC32 family -> embedded microcontroller -> semiconductor IC. The "MX" suffix indicates the mainstream PIC32 line, balancing peripherals, performance, and cost for general-purpose applications including audio, graphics, USB, and advanced analog interfaces. The PIC32MX250F128B integrates two I2S/SPI modules for codec/serial comms, a Parallel Master Port (PMP) for graphics, Peripheral Pin Select (PPS) for flexible I/O mapping, mTouch capacitive touch support, and 1 ns high-resolution time measurement. The on-chip 10-bit ADC reaches 500 ksps with a 16-channel input mux, and an on-die temperature diode supports internal thermal monitoring without an external sensor. Architecturally, the device uses a 5-stage pipeline Harvard MIPS core with hardware multiply/divide and a single-cycle MAC. Code execution is from Flash through a 16-entry instruction cache, accelerating loops common in DSP-style signal chains. USB 2.0 full-speed device/host/OTG and CAN 2.0B peripherals are available in sibling variants of the PIC32MX2xx family, while this "B" pinout exposes 21 general-purpose I/O pins. Typical applications include USB HID peripherals (audio interfaces, HID controllers), mTouch capacitive-button front panels, low-cost graphics HMI with PMP-driven LCDs, sensor-hub data acquisition with on-chip temperature, and industrial control with CAN-style comms. The wide 2.3-3.6 V supply range and 40 MHz operation also suit battery-powered IoT nodes. For layout, place a 10 uF + 0.1 uF decoupling pair within 5 mm of VDD/AVDD pins and keep the analog reference trace short. Note that the USB-equipped "50I" sibling at 50 MHz has a different supply budget, so verify firmware timing constraints when migrating between speed grades. This page consolidates distributor pricing, same-family pin-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select and source this MCU efficiently.

見積もり お問い合わせ