集積回路

サブカテゴリ

📁 ADC/DAC 2518 製品 📁 アンプIC 795 製品 📁 オーディオコーデック 16 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 290 製品 📁 DSP 962 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 6666 製品 📁 インターフェースIC 1571 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 305 製品 📁 メモリIC 875 製品 📁 マイクロコントローラ 18695 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 13 製品

製品 (32740)

PIC32MX230F064C-V/TL - 64KB Flash 32-bit MCU 36-VTLA | Microchip
PIC32MX230F064C-V/TL

PIC32MX230F064C-V/TL - 64KB Flash 32-bit MCU 36-VTLA | Microchip

The Microchip Technology PIC32MX230F064C-V/TL is a 32-bit MIPS M4K microcontroller with 64KB Flash and 16KB SRAM, running at 40 MHz (66 DMIPS) in a 36-pin VTLA exposed-pad package. It operates from 2.3 V to 3.6 V and is AEC-Q100 qualified for automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals into one device. Microcontrollers are the central building blocks of embedded systems, sitting at the heart of everything from consumer appliances to industrial controllers and automotive ECUs. The PIC32 family extends 8/16-bit PIC heritage into the 32-bit MIPS architecture, targeting applications that need higher performance, USB connectivity, and richer peripherals while preserving PIC tool-chain familiarity. Key features include two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible routing, a Parallel Master Port (PMP) for graphics interfaces, USB 2.0 full-speed device/host/OTG, mTouch capacitive-touch support, 1 ns high-resolution time measurement, and on-chip temperature sensing. The device integrates a 10-bit ADC, comparators, and a CTMU for capacitive measurement. The PIC32MX230F064C-V/TL implements the MIPS32 M4K core with single-cycle hardware multiply and zero-overhead looping, achieving 1.65 DMIPS/MHz. The 36-pin VTLA package exposes an exposed thermal pad that must be soldered to the ground plane for electrical and thermal performance. The automotive-grade -V suffix supports -40°C to +105°C operation. Typical applications include automotive body and infotainment subsystems, USB human-interface devices, audio codec front-ends, low-cost graphics HMIs via PMP, and capacitive-touch user interfaces. When designing, ensure the exposed pad is soldered to a continuous ground pour for thermal dissipation; use PPS to remap peripheral pins and ease PCB layout; select the automotive-grade -V variant only when AEC-Q100 qualification is required. This page combines distributor pricing, AEC-Q100-grade drop-in alternatives, and application notes beyond the manufacturer datasheet to speed design and sourcing decisions.

見積もり お問い合わせ
PIC32MX230F064CT-I/TL - 32-bit MCU, 64KB Flash, 40MHz | Microchip
PIC32MX230F064CT-I/TL

PIC32MX230F064CT-I/TL - 32-bit MCU, 64KB Flash, 40MHz | Microchip

The Microchip Technology PIC32MX230F064CT-I/TL is a 32-bit RISC microcontroller built on the MIPS32 M4K core, operating at up to 40 MHz with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package. The 'CT' code denotes Tape & Reel packaging with the industrial -40C to +85C temperature grade, while the 'TL' suffix confirms the VTLA-36 (5x5 mm) package. The device integrates three 16-bit timers/counters, a 10-bit 200 ksps ADC with up to 9 channels, four UART, two SPI, two I2C, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A 32-bit microcontroller (MCU) is a single-chip computer that executes 32-bit instructions in a single clock cycle, providing significantly higher throughput than 8-bit or 16-bit alternatives while retaining deterministic interrupt response. PIC32MX devices sit in the PIC32 family hierarchy of MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32MX sub-family, targeting cost-sensitive embedded applications that need USB, graphics, or richer peripherals than 8-bit PIC MCUs but do not require the higher pin counts of PIC32MZ. Key features of the PIC32MX230F064CT-I/TL include 64 KB Flash with 1 KB auxiliary Flash, 16 KB SRAM, an 8 MHz internal oscillator with PLL support up to 40 MHz, an on-chip 1.5% accurate 32 kHz RTCC oscillator, and a Charge Time Measurement Unit for touch or general time measurement. The 36-pin VTLA package offers a compact footprint suitable for space-constrained designs, and the industrial temperature range supports operation from -40C to +85C. Code protection, JTAG and 2-wire programming interfaces provide flexible in-system programming and debugging options for production environments. The PIC32MX230 uses a 5-stage pipeline MIPS32 M4K core with single-cycle multiplication, providing 1.56 DMIPS/MHz and a deterministic interrupt latency of approximately 5 cycles. The PIC32MX architecture supports 32-bit instructions and aligned 32-bit data, allowing efficient C code execution. The peripheral set is connected via a multi-channel DMA controller and a peripheral bus matrix, reducing CPU overhead for data movement. USB 2.0 full-speed device/host/OTG support, combined with the CTMU, makes this family well suited to human-interface and connectivity designs. Typical applications include USB peripherals, capacitive touch keypads, low-cost graphics LCDs, sensor hubs, and small appliances. The compact 36-pin VTLA package and integrated USB make it a strong fit for compact devices requiring on-board connectivity. The PIC32MX230 is commonly paired with Microchip's MPLAB Harmony and XC32 toolchain for firmware development. A critical design consideration is signal integrity on the 5x5 mm VTLA package: maintain a solid ground plane beneath the exposed pad and route high-speed USB differential pairs (D+/D-) with 90 ohm differential impedance. Decouple VDDCORE and VDDIO pins with 100 nF X7R ceramics placed within 3 mm of each pin. Avoid running switching signals directly under the device to minimise crosstalk on the analog ADC inputs.

見積もり お問い合わせ
PIC32MX230F064D-I/TL - 32-bit MCU 64KB Flash 16KB RAM 40MHz | Microchip
PIC32MX230F064D-I/TL

PIC32MX230F064D-I/TL - 32-bit MCU 64KB Flash 16KB RAM 40MHz | Microchip

The Microchip Technology PIC32MX230F064D-I/TL is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 40 MHz / 66 DMIPS of performance with 0.5 mA/MHz dynamic current consumption. The device integrates 64 KB of Flash program memory and 16 KB of SRAM, packaged in a 44-pin VTLA (6x6 mm) thermally-enhanced surface-mount land-grid array with an exposed die pad. According to the manufacturer datasheet, the -I temperature grade supports operation from -40C to +105C. A 32-bit microcontroller (MCU) is an integrated computing subsystem that combines a high-performance processor core, program and data memory, and a rich set of on-chip peripherals (timers, communication interfaces, ADCs) into a single chip. The PIC32MX230F064D belongs to the PIC32MX1XX/2XX family, positioned in Microchip's product hierarchy as: PIC32MX230 -> PIC32MX2XX -> PIC32MX1/2 family -> PIC32 -> 32-bit MCU -> microcontroller -> integrated circuit. Within an embedded design, an MCU orchestrates real-time I/O, executes application firmware, and serves as the central processing element for sensor reading, motor control, and user-interface handling. Key features include two I2S/SPI modules for audio codec and serial communications, Peripheral Pin Select (PPS) functionality that remaps digital peripherals to multiple I/O pins, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch-button and slider support, high-resolution 1 ns time capture, and on-chip temperature sensing. The MIPS32 M4K core combines 32-bit registers and addressing with deterministic single-cycle ALU operations, achieving an aggregate 66 DMIPS throughput while maintaining the low-power signature typical of PIC architectures. Typical applications include consumer audio accessories, low-cost graphical HMI panels, capacitive-touch user interfaces, industrial sensor nodes, and USB-connected embedded devices. The combination of PMP graphics support, I2S audio interfaces, and CTMU capacitive-touch hardware makes the part particularly well-suited to small color-display products. When designing with this MCU, take advantage of PPS to assign peripheral functions to convenient pin locations, and ensure the VTLA-44 thermal pad is soldered to a sufficient copper area for heat spreading. Use MPLAB XC32 compiler v2.0 or later with the Harmony 3 framework to access the full peripheral library. This page synthesizes distributor inventory, drop-in same-package alternatives from the PIC32MX1XX/2XX family, and practical design notes not collated in the manufacturer datasheet, giving engineers a one-stop reference for sourcing and second-sourcing.

見積もり お問い合わせ
PIC32MX230F064D-V/ML - 32-bit 40MHz MCU 64KB Flash 44-QFN | Microchip
PIC32MX230F064D-V/ML

PIC32MX230F064D-V/ML - 32-bit 40MHz MCU 64KB Flash 44-QFN | Microchip

The Microchip Technology PIC32MX230F064D-V/ML is a 32-bit MIPS M4K microcontroller Flash-based 64KB program memory, 16KB SRAM, and 40 MHz maximum clock frequency housed in a 44-pin QFN (8x8 mm) package. It is a member of the PIC32MX1XX/2XX family and provides 34 general-purpose I/O pins, two I2S/SPI modules, USB 2.0 full-speed device/host/OTG, a Parallel Master Port (PMP) for graphics, Peripheral Pin Select (PPS), and mTouch capacitive-touch support. A microcontroller (microcontroller = MCU = embedded controller) is a single-chip computer integrating a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripherals such as timers, ADC, communication interfaces, and GPIO. The PIC32 family uses a 32-bit MIPS M4K core optimized for deterministic real-time control with low active current of approximately 0.5 mA/MHz, enabling the PIC32MX230F064D-V/ML to fit battery-powered and thermally constrained embedded applications. Key features include 10-bit 1 MSPS ADC with up to 13 channels, five 16-bit timers, two I2S/SPI for codec interfaces, USB 2.0 full-speed OTG, a 1 ns resolution Capture/Compare/PWM timer, on-chip temperature sensor, CTMU for charge-time measurement, and a 5-stage pipeline capable of 66 DMIPS. PPS allows flexible peripheral-to-pin remapping for board-layout freedom. Typical applications include industrial control, USB audio class devices, low-cost graphics terminals using PMP, capacitive touch user interfaces, motor control, and consumer embedded products. Designers use this part to balance MIPS DSP at lower MHz than XT30 or higher-performance alternatives. When designing with this device, ensure the supply rail is within 2.3 V to 3.6 V. The -V (Vtemp) variant supports -40C to +105C operation for industrial environments. This page synthesizes distributor stock, pricing tiers, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F064D-V/PT - 32-bit 40MHz MCU 64KB Flash TQFP-44 | Microchip
PIC32MX230F064D-V/PT

PIC32MX230F064D-V/PT - 32-bit 40MHz MCU 64KB Flash TQFP-44 | Microchip

The Microchip PIC32MX230F064D-V/PT is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering 40 MHz / 66 DMIPS performance while consuming only 0.5 mA/MHz active current, packaged in a 44-pin TQFP (10x10 mm). It integrates 64 KB of Flash program memory and 16 KB of SRAM with USB 2.0 full-speed, two I2S/SPI modules, Peripheral Pin Select (PPS), and a Parallel Master Port (PMP) for graphics interfaces. According to the Microchip PIC32MX1XX/2XX family datasheet, the device operates from 2.3V to 3.6V across an industrial temperature range of -40C to +105C. A PIC32MX microcontroller is a 32-bit MIPS-based MCU that bridges the gap between traditional 8/16-bit microcontrollers and higher-end ARM Cortex-M parts, while staying in the familiar PIC ecosystem with MPLAB X IDE and Harmony framework support. The PIC32MX family sits within the broader hierarchy of microcontroller (MCU) -> embedded processor -> semiconductor device, making it a strong fit for mid-complexity embedded designs that need higher throughput than 8-bit PIC MCUs but want Microchip's toolchain and longevity commitments. Key features of this part include the high-performance MIPS32 M4K core with hardware multiply/divide, 1.6 ms programming-time Flash with self-programmability, a Charge Time Measurement Unit (CTMU) that supports mTouch capacitive touch sensing and 1 ns-resolution time measurement, an on-chip temperature indicator, and a 4-wire MIPS Enhanced JTAG interface for debugging. The 5V-tolerant I/O pins with selectable open-drain, pull-ups, and pull-downs simplify interface to legacy 5V logic. Architecturally, the device combines a Harvard-style bus with separate instruction and data paths, a 5-stage pipeline, and tightly-coupled peripherals routed through PPS for flexible pin mapping. The USB 2.0 full-speed On-The-Go (OTG) controller, two I2S/SPI interfaces for audio codec connectivity, and the PMP for direct LCD/graphical display driving make it suitable for multimedia and human-machine-interface applications without external bus controllers. Typical applications include USB peripherals and HID devices, audio playback systems with I2S DACs, low-cost graphical HMI panels driven by PMP, capacitive touch user interfaces (buttons, sliders, proximity sensors), and industrial control nodes requiring deterministic 32-bit processing at modest power budgets. When designing with this MCU, ensure the VDD/VSS pair is properly decoupled with 100 nF ceramic capacitors placed within 5 mm of each supply pin, and that the 8 MHz internal PLL reference is configured correctly for the target peripheral bus speeds. The PPS feature lets you remap peripherals to most I/O pins, but you must respect pin-function constraints at reset. This page synthesizes current distributor pricing, same-family drop-in alternatives, and practical design notes not collated in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F064D-V/TL - 40MHz 32-bit MCU 64KB Flash VTLA-44 | Microchip
PIC32MX230F064D-V/TL

PIC32MX230F064D-V/TL - 40MHz 32-bit MCU 64KB Flash VTLA-44 | Microchip

The Microchip PIC32MX230F064D-V/TL is a 32-bit RISC microcontroller running up to 40 MHz (66 DMIPS) with 64 KB Flash and 16 KB SRAM, housed in a 44-pin VTLA surface-mount package. It integrates a MIPS32 M4K core with 0.5 mA/MHz typical active current, two I2S/SPI modules, Peripheral Pin Select (PPS), Parallel Master Port (PMP), 5V-tolerant I/O, and a 10-bit 1 Msps ADC with up to 28 analog channels. Operating from 2.3 V to 3.6 V over the -40C to +105C industrial temperature range, it is designed for cost-sensitive embedded applications that need USB, graphics, or audio interfaces. The 'V' suffix denotes the VTLA (Very Thin Land Grid Array) 8 x 8 mm package, and 'TL' indicates tape-and-reel packaging. A microcontroller (MCU) is an integrated circuit combining a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals on a single silicon die. PIC32MX230 devices sit in the mid-performance tier of Microchip's PIC32 family, between the lower-pin PIC32MX1xx series and the higher-memory PIC32MX3xx/4xx/5xx/7xx families. They are widely used in consumer electronics, industrial control, and USB-connected peripherals. PIC32 MCUs execute MIPS32 instructions and are supported by MPLAB X IDE, Harmony v3, and a free GCC-based toolchain. Key differentiating features of the PIC32MX230F064D include full-speed USB 2.0 device/host/OTG, two I2S modules for audio codec interfacing, an on-chip temperature measurement channel, 1 ns high-resolution timer capture for precision timing, and mTouch capacitive touch support via the CTMU peripheral. The Peripheral Pin Select (PPS) feature allows flexible remapping of digital peripherals to any compatible I/O pin, simplifying PCB layout. The Parallel Master Port (PMP) enables direct interface to graphical LCDs and external parallel memory. Typical applications include USB HID peripherals (keyboards, mice, custom HID), audio playback devices driving I2S DACs, low-cost graphical HMI panels using PMP, sensor hubs with mTouch buttons and sliders, and industrial controllers communicating over UART/SPI/I2C. The 40 MHz core, 64 KB program Flash, and 16 KB data RAM are well-matched to RTOS-based designs using FreeRTOS or Microchip Harmony. Designers should ensure decoupling per Microchip's recommended 100 nF + bulk capacitor scheme, place the 8 MHz primary oscillator load capacitors close to the OSCI/OSCO pins, and observe the trace-length guidelines for the USB DP/DM differential signals to maintain USB compliance. Programming uses the 4-wire MIPS enhanced JTAG or ICSP interface. This page synthesizes drop-in PIC32MX1xx/2xx family alternatives, distributor pricing, parametric comparisons, and PCB design notes beyond what the manufacturer datasheet alone provides.

見積もり お問い合わせ
PIC32MX230F064DT-I/ML - 40MHz 32-bit MCU 64KB Flash | Microchip
PIC32MX230F064DT-I/ML

PIC32MX230F064DT-I/ML - 40MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX230F064DT-I/ML is a 32-bit MIPS32 M4K RISC microcontroller integrating 64KB of Flash program memory, 16KB of SRAM, and a peripheral set tuned for audio, graphics, USB, and advanced analog applications. It runs at up to 40 MHz (66 DMIPS), operates from a 2.3 V to 3.6 V supply, and is housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad (EP). A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripheral interfaces on one silicon die. The PIC32MX230 family belongs to the Microchip 32-bit PIC32 hierarchy: PIC32MX -> MIPS M4K 32-bit core -> general-purpose MCU with USB and mTouch. It is widely used as a low-cost, deterministic alternative to ARM Cortex-M0/M3 parts in cost-sensitive consumer and industrial designs. Key features include 33 digital I/O lines, two I2S/SPI modules for codec and serial audio, Peripheral Pin Select (PPS) remappable peripherals, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive-touch support, 1 ns high-resolution time measurement, and on-chip temperature sensing. Five 16-bit general-purpose timers and a 5-channel 10-bit ADC at 1 Msps provide analog and timing flexibility. The architecture combines a Harvard-style 5-stage pipeline MIPS32 M4K core with a dedicated DMA controller and a USB 2.0 full-speed device/host/OTG transceiver on-chip, eliminating the need for an external PHY. Integrated crypto and unique-device-id features support secure boot use cases, while low-power Run, Idle, and Sleep modes cut typical current draw to 0.5 mA/MHz active. Typical applications include USB audio peripherals, low-cost graphics HMI panels, capacitive-touch user interfaces, sensor hubs, and small-format IoT edge nodes. The wide operating temperature range of -40C to +105C suits industrial enclosures and outdoor installations. For new designs, prefer the T (tape-and-reel) and -I (industrial temp) suffix ordering code, and ensure the EP pad is soldered to a properly sized copper thermal plane to meet the 8x8 mm QFN thermal budget. Refer to the Microchip PIC32MX230/250/270/330/350/370 data sheet for register-level details and peripheral library code.

見積もり お問い合わせ
PIC32MX230F064DT-V/ML - 40MHz 32-bit MCU 64KB Flash | Microchip
PIC32MX230F064DT-V/ML

PIC32MX230F064DT-V/ML - 40MHz 32-bit MCU 64KB Flash | Microchip

The Microchip PIC32MX230F064DT-V/ML is a 32-bit RISC microcontroller from the PIC32MX2xx family, featuring a MIPS32 M4K core running at 40 MHz (66 DMIPS), 64 KB of Flash, 16 KB of SRAM, and housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device operates from 2.5V or 3.3V, integrates two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP), mTouch capacitive touch support, 1 ns high-resolution time measurement, and an on-chip temperature sensor. The -V suffix denotes the automotive AEC-Q100 Grade 1 temperature range of -40C to +105C. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable peripherals on a single die. The PIC32MX230 belongs to the broader category of embedded microcontrollers within the power management and control IC hierarchy: MCU -> embedded controller -> semiconductor device. The MIPS32 M4K core provides 32-bit register width and a 5-stage pipeline, yielding substantially higher throughput than 8-bit or 16-bit MCUs while remaining compatible with the standard MIPS instruction set. Key features include active current consumption of 0.5 mA/MHz, support for the MPLAB X IDE and Harmony framework, hardware CRC, JTAG and 2-wire programming/debug, and 5 CCP/PMP/I2S-capable timer/capture modules. The PPS function lets the user remap most digital peripherals to a wide choice of I/O pins, simplifying PCB routing in space-constrained designs. Architecturally, the PIC32MX230 combines a Harvard-style bus with separate Flash and SRAM paths, hardware multiply/divide, and a Nested Vector Interrupt Controller (NVIC). This allows deterministic interrupt latency and fast context switches for real-time control loops. The 1 ns timer resolution (using the 16-bit Timer1 with cascaded mode) is well suited to high-precision time-of-flight or pulse-width measurements. Typical applications include automotive body and HVAC control, industrial sensor hubs, capacitive touch human-machine interfaces, low-cost graphics with PMP-driven TFT panels, IoT edge nodes, and consumer appliances. The AEC-Q100 Grade 1 qualification and wide peripheral mix make it especially attractive to automotive Tier-1 suppliers needing a small-footprint MCU with CAN/USB-friendly companion chips. When designing with this MCU, take care to honor the decoupling guidance in the PIC32MX230 family datasheet - one 0.1 uF X7R plus one bulk capacitor per VDD pin, and a dedicated decoupling cap for VDDCORE. The exposed thermal pad on the QFN-44 must be soldered to a grounded copper pour to meet the package's thermal resistance spec. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in the manufacturer datasheet or on distributor stock pages, helping engineers evaluate the PIC32MX230F064DT-V/ML for both new designs and as a substitute for legacy PIC24/PIC32 parts.

見積もり お問い合わせ
PIC32MX230F064DT-V/PT - 40MHz 32-bit MCU, 64KB Flash, 44-TQFP | Microchip
PIC32MX230F064DT-V/PT

PIC32MX230F064DT-V/PT - 40MHz 32-bit MCU, 64KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC32MX230F064DT-V/PT is a 32-bit RISC microcontroller from the PIC32MX1XX/2XX family, featuring a MIPS32 M4K core running at 40 MHz (66 DMIPS) with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates USB 2.0 full-speed, two I2S/SPI modules, a Parallel Master Port (PMP) for graphics, Peripheral Pin Select (PPS), five 16-bit timers, a 10-bit ADC with 1 Msps capability, and mTouch capacitive-touch support, all within a 2.3 V to 3.6 V operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces such as timers, ADC, and communication buses. The PIC32MX230 sits within the broader taxonomy of embedded controllers (32-bit MCU -> MIPS-based MCU -> PIC32 family -> Microchip 8/16/32-bit portfolio), serving as a bridge between 8-bit PIC16/PIC18 designs and higher-performance Cortex-M parts. The MIPS32 M4K core delivers 1.5 DMIPS/MHz, supporting deterministic real-time control alongside rich connectivity for HMI and audio applications. Key features include 0.5 mA/MHz active current for low-power designs, 1 ns high-resolution timer capture for precise measurements, on-chip temperature sensor, 34 general-purpose I/O pins with PPS remapping, and an automotive-grade -V temperature rating of -40 C to +105 C. The device supports both industrial (AEC-Q100 not mandatory) and automotive-grade deployments where extended thermal range and ruggedness are required, making it suitable for under-hood and harsh-environment nodes. The architecture combines a 5-stage MIPS pipeline with single-cycle multiply and hardware divide, enabling deterministic interrupt latency for motor-control and audio codec loops. Internal oscillator options and flexible clock switching reduce external component count, while the PMP module directly drives TFT LCDs without an external gate-driver ASIC. USB 2.0 full-speed with on-chip transceiver and dedicated DMA channels simplifies tethered peripherals such as HID, CDC, and audio class devices. Typical applications include automotive body electronics, consumer audio interfaces with I2S codecs, low-cost TFT HMI panels, capacitive-touch user interfaces, USB HID peripherals, and industrial sensor hubs. The combination of USB, audio interfaces, and graphics PMP within a compact 44-TQFP footprint makes the PIC32MX230 particularly attractive for cost-sensitive multimedia nodes. When designing with this MCU, allocate adequate decoupling (100 nF per VDD/VSS pair plus a 4.7 uF bulk), keep the 40 MHz trace lengths short, and use the PPS feature to remap peripherals to convenient pins rather than re-routing the PCB. For USB designs, the 90 ohm differential pair must be routed with controlled impedance. This page consolidates distributor pricing as of 2026-10-02, drop-in same-package alternatives, and practical design notes beyond what the Microchip datasheet alone provides.

見積もり お問い合わせ
PIC32MX230F064DT-V/TL - 32-bit MCU, 64KB Flash, 40MHz, VTLA-44 | Microchip
PIC32MX230F064DT-V/TL

PIC32MX230F064DT-V/TL - 32-bit MCU, 64KB Flash, 40MHz, VTLA-44 | Microchip

The Microchip Technology PIC32MX230F064DT-V/TL is a 32-bit MIPS32 M4K RISC microcontroller operating at 40 MHz with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 44-pin VTLA (6x6 mm) surface-mount package. As a member of the PIC32MX2xx family, it combines high-performance CPU throughput (66 DMIPS) with low active current consumption of approximately 0.5 mA/MHz, making it suitable for both performance-demanding and power-conscious designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals such as timers, communication interfaces, and analog converters. The PIC32MX230 belongs to the broader PIC32MX family, which itself descends from the 32-bit MCU hierarchy of MIPS-based microcontrollers used in industrial control, consumer electronics, automotive, and IoT applications. Key features include a 10-bit ADC with up to 1.1 Msps conversion rate and 13 analog input channels in the 44-pin variant, three analog comparators, a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch sensing with 1 ns time resolution, and on-chip temperature measurement capability. The device also integrates a USB 2.0 full-speed OTG controller, two I2S/SPI modules, two UART/I2C modules, a Parallel Master Port (PMP) for graphics or external memory interfaces, Peripheral Pin Select (PPS) for flexible pin mapping, four DMA channels, and separate PLLs for the CPU and USB clocks. Operating voltage is 2.3V to 3.6V with an automotive -40C to +105C temperature range (V suffix). Typical applications include automotive body and HVAC controllers, industrial HMI panels with capacitive touch, USB peripherals and audio streaming devices, low-cost graphics terminals using PMP, and mTouch user interface boards. Design considerations include providing a stable 3.3V rail with adequate decoupling, routing the 48 MHz USB clock away from analog traces, and following Microchip's AN1166 PCB layout guidelines for VTLA-44 ground-thermal pad soldering. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MX2xx family, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F128H-50I/MR - 50MHz MIPS32 M4K MCU 128KB Flash | Microchip
PIC32MX230F128H-50I/MR

PIC32MX230F128H-50I/MR - 50MHz MIPS32 M4K MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX230F128H-50I/MR is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz (83 DMIPS), with 128 KB Flash and 16 KB SRAM, housed in a 64-pin QFN (9x9 mm) package with industrial-grade -40C to +85C temperature range. The part integrates a USB 2.0 Full-Speed OTG controller, three I2S/SPI modules, four UART, two I2C ports, a Parallel Master Port (PMP) with dual read/write buffers, Peripheral Pin Select (PPS) for flexible pin mapping, and a 10-bit ADC with up to 28 channels. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program flash, data RAM, and peripheral set. The PIC32 family uses the MIPS32 M4K core, a true 32-bit RISC architecture that delivers higher DMIPS/MHz than 8/16-bit legacy cores. Within the broader taxonomy, a 32-bit MCU sits between 16-bit MCUs (such as PIC24) and 64-bit application processors, occupying the sweet spot for embedded control, USB peripherals, and graphics HMI. Key features highlight build that 128 KB self-Flash with 16 KB RAM supports moderately complex embedded applications, while PPS allows remapping of digital peripherals to most I/O pins. The PMP with dual buffers enables direct interfacing to graphical TFT/STN displays without an external controller. A 50 MHz core clock with 83 DMIPS equates to roughly 1.66 DMIPS/MHz, sufficient for USB stacks, audio codecs, and modest TCP/IP workloads. Typical applications include USB HID/CDC devices, low-cost audio playback with I2S codecs, graphics HMIs with PMP-driven LCDs, industrial sensor hubs, and IoT edge nodes. The wide peripheral Pin Select also simplifies PCB routing for mixed-signal designs. A key design consideration is that the -50I/MR suffix denotes a 50 MHz speed grade in the industrial temperature range; the part shares a pinout with the -I/MR 40 MHz variant, so engineers may compare silicon revision and current draw before scaling to the higher clock. This page synthesizes drop-in alternatives, real-time distributor pricing, and practical design notes not found in the manufacturer datasheet. Engineers can use the comparison table and design notes to make faster source decisions.

見積もり お問い合わせ
PIC32MX230F128H-50I/PT - 50MHz 32-bit MCU, 128KB Flash | Microchip
PIC32MX230F128H-50I/PT

PIC32MX230F128H-50I/PT - 50MHz 32-bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC32MX230F128H-50I/PT is a 32-bit microcontroller from the PIC32MX family, based on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance in a 64-pin TQFP (10x10 mm) package. It integrates 128 KB of Flash program memory and 16 KB of SRAM, with a 2.3 V to 3.6 V supply range and an industrial -40 C to +85 C operating temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. In the embedded-system hierarchy, the PIC32MX230 family sits between 8-bit PIC MCUs and 32-bit Cortex-M parts, targeting cost-sensitive 32-bit applications that benefit from MIPS instruction-set familiarity, deterministic interrupt latency, and Microchip's MPLAB Harmony software ecosystem. Key features include four SPI modules and two I2S interfaces for codec and serial audio, Peripheral Pin Select (PPS) for flexible peripheral-to-pin routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics and external memory, a 10-bit 1 Msps ADC with up to 28 analog inputs, USB 2.0 full-speed device/host/OTG, and a CAN 2.0B module. The 50 MHz core delivers 83 DMIPS, and the wide peripheral mix supports both HMI and connectivity designs from a single part. Typical applications include consumer audio with I2S codec front-ends, USB peripherals such as HID and CDC class devices, low-cost graphics terminals using PMP to drive LCD controllers, CAN nodes in industrial automation, and general-purpose 32-bit embedded control. The 16 KB SRAM and 128 KB Flash budget fits medium-sized state machines, USB stacks, and graphical user interfaces with character or small bitmap displays. When designing with this part, follow Microchip's reference decoupling scheme (0.1 uF plus bulk), respect the 3.6 V absolute maximum on VDD, and use PPS to remap peripherals after layout changes. The 50 MHz core requires careful trace length matching for high-speed interfaces such as USB and PMP.

見積もり お問い合わせ
PIC32MX230F128H-I/PT - 32-bit MCU 128KB Flash 40MHz TQFP-64
PIC32MX230F128H-I/PT

PIC32MX230F128H-I/PT - 32-bit MCU 128KB Flash 40MHz TQFP-64

The Microchip Technology PIC32MX230F128H-I/PT is a 32-bit MIPS32 M4K microcontroller featuring 128 KB Flash, 16 KB RAM, and a maximum CPU speed of 40 MHz, housed in a 64-pin TQFP (10x10 mm) package. This PIC32MX230 family member integrates two I2S interfaces, four SPI modules, USB 2.0 full-speed, CAN 2.0B, a 10-bit ADC with up to 1 Msps, and a Parallel Master Port (PMP) for graphics interfaces. The device operates from 2.3 V to 3.6 V across the industrial -40 °C to +85 °C temperature range. A 32-bit microcontroller (MCU) is a microprocessor-on-a-chip that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals on a single die. The PIC32MX family uses the MIPS32 M4K RISC architecture (Harvard bus, 5-stage pipeline) and sits within the broader taxonomy of microcontrollers → RISC microcontrollers → 32-bit MCUs → embedded controllers → semiconductor ICs. Compared to 8/16-bit MCUs, 32-bit cores deliver higher computational throughput, larger addressable memory spaces, and richer connectivity peripherals, making them suitable for audio/graphics/HMI applications where this PIC32MX230 variant is positioned. Key features include Peripheral Pin Select (PPS) for flexible peripheral-to-pin routing, JTAG and 2-wire programming/debug, an on-chip 8 MHz internal oscillator, and a charge time measurement unit (CTMU) for touch sensing. The CTMU plus PMP and I2S blocks make the device well-suited for human-machine interface (HMI) designs including segment/graphic LCD control and audio playback. The PIC32MX230F128H-I/PT is typically used in industrial sensor hubs, USB audio peripherals, CAN-based automotive accessory nodes, segment LCD controllers, and low-power connected sensor platforms where its 5 V tolerant digital I/O (with proper biasing) and dual I2S simplify BOM. Two I2S ports enable stereo codec interfaces while the four SPI ports support external memory, RF transceivers, or displays. When designing with this part, observe the absolute maximum 3.6 V supply and the 40 MHz core frequency ceiling (50 MHz parts use the -50I suffix). Decouple VDD/VUSB with 100 nF ceramic caps placed within 3 mm of each pin pair and route the 8 MHz crystal traces symmetrically to minimize duty-cycle distortion.

見積もり お問い合わせ
PIC32MX230F128H-V/MR - 32-bit MCU, 128KB Flash, 64-QFN | Microchip
PIC32MX230F128H-V/MR

PIC32MX230F128H-V/MR - 32-bit MCU, 128KB Flash, 64-QFN | Microchip

The Microchip PIC32MX230F128H-V/MR is a 32-bit MIPS32 M4K microcontroller delivering 40 MHz/52 DMIPS core performance with 128 KB of Flash and 16 KB of SRAM in a 64-pin QFN (9x9 mm) package. The part suffix "V" indicates the automotive-grade, -40C to +105C operating temperature range, while "/MR" specifies the 64-lead QFN surface-mount package supplied in tube packaging. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals such as ADC, timers, communication controllers, and I/O pins. The PIC32MX2XX family occupies the entry-level to mid-range tier of Microchip's 32-bit PIC32 portfolio, positioned between the PIC32MX1XX/5XX series and the higher-end PIC32MX3XX/4XX/6XX/7XX devices, all sharing the MIPS32 M4K core architecture for instruction-set compatibility across the family. Key features include 128 KB Flash organized as 128K x 8, 16 KB RAM, a 10-bit ADC with up to 28 input channels, four SPI/I2S modules, two I2C modules, and USB 2.0 Full-Speed On-The-Go (OTG) capability. The device also integrates Peripheral Pin Select (PPS), a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based sensing applications. The PIC32MX230F128H is built on a 5-stage pipelined MIPS32 M4K RISC core running at 40 MHz (the V-temp automotive grade part). The M4K core supports the MIPS16e ISA extension for code compression, achieving up to 1.65 DMIPS/MHz and 3.45 CoreMark/MHz, while consuming low core power. An integrated 8 MHz internal FRC oscillator provides clock flexibility, and the integrated USB 2.0 Full-Speed OTG controller enables direct device/host/OTG connectivity without external PHY. Typical applications include automotive infotainment human-machine interfaces (HMI), USB peripherals (Human Interface Devices like keyboards, mice, and game controllers), industrial control panels with capacitive touch buttons (via CTMU), low-cost graphics interfaces through the PMP peripheral, and audio playback products using the I2S interface with external DACs. The combination of USB OTG, capacitive touch, and graphics PMP makes this part particularly attractive for automotive HMI and consumer electronics with HMI. When designing with this device, ensure that the 2.3 V to 3.6 V supply rail is well decoupled with a 10 uF bulk + 0.1 uF high-frequency ceramic pair near each VDD pin. The PPS feature lets the engineer remap peripheral signals to most digital I/O pins, but once assigned, the pin map must be locked before code freeze to avoid PCB rework. The V temperature grade limits operation to -40C to +105C. This page synthesizes XAIPART distributor pricing for the V/MR temperature/package combination, drop-in V/MR-package alternatives from the PIC32MX230F family, and practical design notes not found on the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F128H-V/PT - 32-bit MCU, 128KB Flash, 40MHz, 64-TQFP | Microchip
PIC32MX230F128H-V/PT

PIC32MX230F128H-V/PT - 32-bit MCU, 128KB Flash, 40MHz, 64-TQFP | Microchip

The Microchip Technology PIC32MX230F128H-V/PT is a 32-bit microcontroller built on the MIPS32 M4K core, delivering 40 MHz (up to 50 MHz) and 83 DMIPS of computational throughput for embedded designs that need deterministic real-time control. It integrates 128 KB of Flash program memory and 16 KB of SRAM in a 64-pin TQFP (10x10 mm) package, with USB 2.0 Full-Speed On-The-Go, four SPI/I2S modules, two I2C modules, and up to five UART channels. Peripheral Pin Select (PPS) remapping enables flexible signal routing, while a Parallel Master Port (PMP) with dual buffers handles graphics and external memory interfaces. According to the verified distributor listing, this variant is qualified to the automotive AEC-Q100 standard, making it suitable for in-cabin HMI, body controllers, and other vehicle electronics subject to rigorous environmental stress. The -V temperature grade extends operation from -40C to +105C, wider than the -I industrial grade of -40C to +85C. An integrated CTMU (Charge Time Measurement Unit) enables touch sensing and precise time-of-flight measurements, and a Real-Time Clock Calendar (RTCC) module with separate power domain supports always-on timekeeping. What is a 32-bit MCU? A microcontroller is a single-chip computer containing a CPU core, program memory (Flash), working memory (SRAM), and a mix of digital peripherals and analog blocks such as ADC and comparators. PIC32MX devices sit in Microchip's MIPS-based 32-bit MCU hierarchy: PIC32MX -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Designers choose PIC32MX parts when they need more MIPS, RAM, and DMA than an 8-bit PIC16/PIC18 MCU offers, without paying for a Cortex-M4 application processor. In this part, 128 KB Flash and 16 KB SRAM support USB stacks, graphics libraries, and protocol converters on-chip, while PPS removes the constraint of fixed peripheral-to-pin assignments. Practical trade-off: PIC32MX230F128H-V/PT does not include a CAN or Ethernet peripheral, so designers needing those must move up to PIC32MX5xx/6xx/7xx family variants. The PIC32MX230F128H-V/PT is supplied in Tray packaging with a 160-unit minimum order quantity for OEM production. This page consolidates distributor pricing, parametric data, drop-in alternatives within the same 64-TQFP footprint, and practical design guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F128HT-I/PT - 32-bit 50MHz 128KB Flash MCU | Microchip
PIC32MX230F128HT-I/PT

PIC32MX230F128HT-I/PT - 32-bit 50MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC32MX230F128HT-I/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 50 MHz with 128 KB of Flash program memory and 16 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm). It integrates a full-speed USB 2.0 device/host/OTG controller, a 10-bit 1 Msps ADC with up to 28 channels, two I2S/SPI audio interfaces, a capacitive touch (CTMU) peripheral, and a Real-Time Clock Calendar (RTCC) module. The 'T' suffix denotes the tape-and-reel packaging option, while '-I/PT' indicates the industrial temperature grade (-40C to +85C) and 64-pin TQFP package. A 32-bit microcontroller is an integrated circuit combining a 32-bit CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single silicon die. Within the broader taxonomy, this places the part as a microcontroller -> embedded processor -> system-on-chip (SoC) -> semiconductor IC. The PIC32MX family specifically targets cost-sensitive embedded applications that require USB connectivity, digital audio, and human-machine interface (HMI) features without the overhead of higher-end Cortex-M parts. Key features include a 1.25 DMIPS/MHz MIPS32 M4K core, single-cycle multiplication and division, a 5-stage pipeline, and up to 51 GPIO pins. The device also includes three SPI/I2S modules, two UART modules, two I2C modules, five 16-bit timers/counters, and a 16-channel DMA controller. An 8-bit Parallel Master Port (PMP) supports external memory or graphics displays. The internal 8 MHz Fast RC oscillator with PLL provides flexible clocking, and an on-chip LDO regulator simplifies single-rail 2.5 V/3.3 V designs. The architecture uses a Harvard-style bus with separate Flash and SRAM buses, enabling simultaneous instruction fetch and data access for predictable interrupt latency. The USB 2.0 full-speed PHY is integrated on-chip, eliminating external transceiver components. The CTMU peripheral enables capacitive touch sensing for buttons, sliders, and proximity detection, while the RTCC maintains accurate timekeeping with backup battery domain. The 10-bit ADC with DMA support enables high-throughput sensor sampling at up to 1 Msps. Typical applications include USB peripherals (HID, CDC, mass storage), consumer audio products (MP3 players, headphones, soundbars), home appliances with capacitive touch user interfaces, industrial control panels, medical monitoring devices, and low-cost HMI designs with graphics LCD support. The combination of USB, CTMU, and I2S makes it particularly suited for connected audio appliances and USB-charging smart-home hubs. When designing with this part, allocate PCB footprint for the 10x10 mm TQFP body with 0.5 mm pitch and ensure the USB D+/D- traces are routed as a 90 ohm differential pair. Decouple VDD with 100 nF and 4.7 uF capacitors placed within 3 mm of each supply pin, and provide a 4.7 kohm pull-up on D+ for full-speed USB enumeration. This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC32MX family, and practical PCB design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F128HT-V/MR - 40MHz MIPS 32-bit MCU 128KB Flash QFN-64 | Microchip
PIC32MX230F128HT-V/MR

PIC32MX230F128HT-V/MR - 40MHz MIPS 32-bit MCU 128KB Flash QFN-64 | Microchip

The Microchip PIC32MX230F128HT-V/MR is a 32-bit MIPS M4K microcontroller with 128KB Flash and 16KB SRAM in a 64-pin QFN EP (9x9 mm) package, operating up to 40MHz (50MHz/83 DMIPS capable per family). It supports 2.5V/3.3V operation, includes USB OTG, two I2S, four SPI, I2C, UART, PMP, and a 10-bit ADC with CTMU for touch sensing. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die. PIC32MX230F devices belong to the PIC32MX1xx/2xx general-purpose family (MIPS32 M4K core) within the broader PIC32 microcontroller portfolio, which targets USB, graphics, and HMI applications with integrated connectivity and analog peripherals. Key features include 128KB Flash (128K x 8), 16KB SRAM, Peripheral Pin Select (PPS) for flexible signal routing, Parallel Master Port (PMP) with dual buffers for graphics, hardware crypto engine (in select variants), 5 PWM channels, and a 16-channel 10-bit ADC. Industrial-grade -40C to +105C temperature range (V-suffix) ensures operation in harsh environments. The MIPS32 M4K core executes most instructions in one cycle, delivering up to 1.56 DMIPS/MHz (83 DMIPS at 50MHz). The 5-stage pipeline and hardware multiply/divide accelerator enable deterministic real-time performance. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB layout and BOM reuse across family variants. Typical applications include industrial control and HMI panels, USB device/host peripherals, audio playback with I2S codecs, low-cost graphics interfaces (PMP), sensor hubs with CTMU touch, and consumer appliances requiring USB connectivity. The integrated USB OTG full-speed controller eliminates external PHY chips. When designing with this device, ensure the 64-pin QFN EP has sufficient PCB copper pour (minimum 1 sq inch) to dissipate heat and provide a low-impedance ground. Decouple VDD/VSS pairs with 100nF + 1uF ceramics placed within 3mm of each pin pair. Configure PPS before enabling peripherals to avoid spurious signals. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in same-family variants, and practical design notes not found in the standalone datasheet.

見積もり お問い合わせ
PIC32MX230F128L-50I/PF - 50MHz 128KB Flash MCU 100-TQFP | Microchip
PIC32MX230F128L-50I/PF

PIC32MX230F128L-50I/PF - 50MHz 128KB Flash MCU 100-TQFP | Microchip

The Microchip Technology PIC32MX230F128L-50I/PF is a 32-bit MIPS microcontroller based on the MIPS32 M4K core, operating at up to 50 MHz / 83 DMIPS, with 128 KB of Flash program memory and 16 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package. It belongs to the PIC32MX2xx family, the cost-optimized general-purpose segment of the PIC32MX portfolio, designed for embedded HMI, audio, and connectivity applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program and data memory, and a rich set of peripherals on a single silicon die. Within the broader semiconductor taxonomy, an MCU sits below microprocessors in integration but above standard logic ICs in computational capability, occupying the embedded-computing tier. The PIC32MX230F128L belongs to the PIC32 family (Microchip), positioned as a high-performance extension of the legacy PIC16/PIC24 dSPIC families, and runs the MIPS32 instruction set. Key differentiating features of this part include two I2S modules for digital audio, four SPI interfaces for codec and serial communications, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, Peripheral Pin Select (PPS) for flexible I/O mapping, and a 10-bit ADC with up to 1 Msps conversion rate. The 128 KB Flash supports self-programming, while 16 KB SRAM provides generous headroom for data buffers in audio and graphics workloads. Architecturally, the PIC32MX230F128L uses a 5-stage pipeline MIPS32 M4K core with single-cycle multiply, hardware divide, and a tightly-coupled prefetch buffer that hides Flash latency. The bus matrix supports concurrent DMA transfers between peripherals and memory, enabling efficient streaming of audio samples to I2S without CPU intervention. PPS allows most digital peripherals to be remapped to nearly any digital I/O pin. Typical applications include consumer audio devices (MP3 players, Bluetooth speakers, headphone amplifiers with DSP), HMI control panels with small TFT displays, low-cost CAN-connected industrial sensors, USB device peripherals, and general-purpose embedded control with 32-bit performance headroom. When designing with this part, note that the 50 MHz maximum clock rate is a -50I industrial-grade part rated -40C to +85C; for automotive applications choose the -V variant, and for extended temperature choose the -E variant. Verify PPS remapping on every design revision because peripheral-to-pin mappings vary across PIC32MX sub-families. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F128L-V/PF - 32-bit 50MHz 128KB Flash MCU TQFP-100 | Microchip
PIC32MX230F128L-V/PF

PIC32MX230F128L-V/PF - 32-bit 50MHz 128KB Flash MCU TQFP-100 | Microchip

The Microchip Technology PIC32MX230F128L-V/PF is a 32-bit MIPS MCU from the PIC32MX1xx/2xx family featuring a MIPS32 M4K core running up to 50 MHz / 83 DMIPS, integrated with 128 KB Flash and 16 KB SRAM, packaged in a 100-pin TQFP (14x14 mm). It operates from 2.3V to 3.6V and supports a -40C to +105C extended temperature grade (suffix "V"). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and programmable peripherals. The PIC32MX230F128L belongs to the MIPS32 M4K architecture family, which sits in the 32-bit MCU category alongside ARM Cortex-M parts; it is broadly classified as a microcontroller -> embedded processor -> semiconductor. Within Microchip's PIC32 line, the PIC32MX2xx sub-family is the cost-optimized tier offering USB, PMP, and PPS peripherals at higher pin counts. Key features include 128 KB Flash, 16 KB SRAM, two I2S and four SPI modules, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, a 16-channel 10-bit 1 Msps ADC, four UART modules, two I2C, five 16-bit timers/counters, and CTMU. The 50 MHz M4K core delivers up to 83 DMIPS performance, sufficient for human-machine interface (HMI), USB device, and embedded connectivity designs. The device integrates a 5-stage pipeline, hardware multiply/divide, single-cycle MAC, prefetch buffer, and a JTAG/ICSP debug interface. The PMP peripheral simplifies connection to graphical LCD controllers, while PPS allows remapping of digital peripherals to almost any I/O, easing PCB layout. These features give designers flexibility similar to higher-tier Cortex-M0+ MCUs while keeping the Microchip MPLAB X toolchain. Typical applications include industrial control boards, USB device peripherals, HMI touch panels, audio playback with I2S DAC, sensor hubs, and general-purpose embedded designs. Drop-in variants in the same 100-pin TQFP exist with different Flash/RAM densities (PIC32MX230F064, PIC32MX150F256, PIC32MX170F512) for upward/downward memory migration without PCB rework. When designing, ensure decoupling capacitors are placed as close as possible to each power pin (100 nF X7R per pin, plus a bulk 4.7 uF on VDD). Configure PPS carefully - unused remapped pins default to general I/O. A 12 MHz external crystal or internal 8 MHz FRC with PLL is typically used to reach 50 MHz core clock. This page synthesizes distributor pricing, drop-in same-package variants from Microchip's PIC32MX family, comparison tables, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC32MX230F128L-V/PT - 32-bit 40MHz MCU 128KB Flash 100-TQFP | Microchip
PIC32MX230F128L-V/PT

PIC32MX230F128L-V/PT - 32-bit 40MHz MCU 128KB Flash 100-TQFP | Microchip

The Microchip PIC32MX230F128L-V/PT is a 32-bit MIPS MCU based on the MIPS32 M4K core, integrating 128 KB Flash and 16 KB SRAM with a maximum operating frequency of 40 MHz (in V-temperature variants; the I-variant operates up to 50 MHz). The PIC32MX230F128L-V/PT is housed in a 100-pin TQFP (12x12 mm) package, belongs to the AEC-Q100 qualified PIC32MX230 family, and operates from 2.3V to 3.6V. What is a PIC32MX microcontroller? A PIC32MX is a 32-bit Flash microcontroller from Microchip built on the MIPS32 M4K core. It belongs to the wider class of 32-bit microcontrollers -> RISC microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MX parts combine a Harvard architecture, MIPS instruction set, Peripheral Pin Select (PPS) flexibility, USB, I2S, PMP, and rich analog peripherals, sitting between 8-bit PIC16/PIC18 parts and higher-end Cortex-M MCUs in Microchip's portfolio. Key features of the PIC32MX230F128L-V/PT include: 128 KB Flash program memory, 16 KB SRAM, 83 DMIPS / 50 MHz maximum performance, USB 2.0 full-speed device/host/OTG, two I2S and four SPI modules for audio codec and serial communications, Peripheral Pin Select (PPS) for flexible peripheral mapping, and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. The V-suffix denotes the -40C to +105C operating temperature range suitable for industrial and automotive-grade designs. Technically, the device uses a 5-stage pipeline MIPS32 M4K core with single-cycle multiplication and hardware divide, supporting both MIPS16e code compression for reduced Flash footprint and microMIPS mode. The 1.5 Msps 10-bit ADC has up to 13 input channels, and analog comparators with programmable reference support mixed-signal designs. The CTMU (Charge Time Measurement Unit) enables capacitive touch and time-of-flight measurements, while RTCC provides real-time clock calendar functionality with timestamp events. Typical applications include USB peripherals, audio playback devices using I2S codecs, industrial control with capacitive touch sensing, and embedded graphics interfaces using PMP. The AEC-Q100 qualification makes it especially suitable for automotive body electronics, HVAC panels, and HMI subsystems. Design tip: When migrating from PIC24/PIC32 variants, verify peripheral pin mapping because PPS allows digital function remapping, which differs from fixed-pin PIC16/PIC18 architectures. Also confirm voltage rail (3.3V only - no 5V tolerance on I/O). This page synthesizes verified distributor pricing, AEC-Q100-qualified drop-in alternatives from the same PIC32MX family, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F128LT-50I/PT - 32-bit MCU 128KB Flash TQFP-100 | Microchip
PIC32MX230F128LT-50I/PT

PIC32MX230F128LT-50I/PT - 32-bit MCU 128KB Flash TQFP-100 | Microchip

The Microchip PIC32MX230F128LT-50I/PT is a 32-bit MIPS microcontroller from the PIC32MX2xx family, featuring a MIPS32 M4K core running at 50 MHz, 128 KB of Flash program memory, and 16 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from 2.3 V to 3.6 V and integrates USB 2.0 full-speed, I2C, SPI, UART, PMP, and 10-bit ADC peripherals for mixed-signal embedded designs. What is a PIC32MX microcontroller? The PIC32MX is Microchip's line of 32-bit MIPS-based microcontrollers, extending the classic PIC architecture into the 32-bit domain. Architecturally, a PIC32MX sits in the hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MX -> PIC32MX2xx family. It combines the deterministic behavior and ease of use that PIC MCUs are known for, with the throughput and memory headroom of a 32-bit core, enabling connectivity, USB, and graphical user-interface workloads that 8-bit or 16-bit parts cannot comfortably handle. Key features include a single-cycle 32-bit multiply-divide unit, DMA controller for peripheral data movement without CPU intervention, and an 80 MHz maximum operating frequency (50 MHz at the device's worst-case commercial/industrial ratings). The integrated USB 2.0 full-speed OTG controller, parallel master port (PMP), and CTMU touch peripheral expand the device beyond traditional GPIO-and-UART designs. 16 KB of SRAM and 128 KB of self-programmable Flash give enough room for USB stacks, TCP/IP, or modest graphics libraries. The PIC32MX230F128L integrates a high-performance MIPS M4K core with Harvard bus architecture, achieving 1.56 DMIPS/MHz, paired with a fast interrupt controller that supports up to five external interrupts and an 8-level deep hardware stack. The peripheral set is pin-mapped and clocked through configurable dividers, with the DMA controller able to service UART, SPI, and ADC concurrently. Code execution is from internal Flash with optional cache, and JTAG/ICSP/4-wire programming interfaces are supported for production-line firmware load. Typical applications include USB peripherals such as HID human-interface devices, industrial control nodes requiring serial connectivity (UART, I2C, SPI) and PMP-driven displays, low-cost graphics-enabled HMIs using PMP-to-LCD or OLED panels, sensor hubs with CTMU-based capacitive touch, and connectivity bridges that pair USB with UART/SPI peripherals. The industrial temperature grade (-40C to +85C) and 3.3 V I/O make it compatible with mainstream CMOS peripherals. Design consideration: when porting a PIC24/dsPIC design to PIC32MX, verify stack depth and vector table layout - PIC32MX uses a MIPS-style exception model. Decoupling must include a 100 nF plus 10 uF bulk near VDD/VSS pins, and the USB D+/D- lines need 15 kΩ pull-down resistors per the USB specification when configured as a device. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers and buyers a single, citable reference for the PIC32MX230F128LT-50I/PT.

見積もり お問い合わせ
PIC32MX230F128LT-I/PF - 128KB Flash 32-bit MCU | Microchip 100-TQFP
PIC32MX230F128LT-I/PF

PIC32MX230F128LT-I/PF - 128KB Flash 32-bit MCU | Microchip 100-TQFP

The Microchip Technology PIC32MX230F128LT-I/PF is a 32-bit MIPS32 M4K microcontroller with 128KB Flash and 16KB SRAM, housed in a 100-pin TQFP (14x14 mm) package. It operates at up to 50 MHz/83 DMIPS from a 2.3V to 3.6V supply and integrates USB 2.0 full-speed OTG, two I2S, four SPI, five UART, and a 10-bit 1 Msps ADC with up to 28 channels. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and integrated peripherals. The PIC32MX230 belongs to the MIPS32 M4K family - a Harvard-architecture 32-bit RISC core positioned between 16-bit PIC24F0/33F MCUs and the higher-end Cortex-M MCUs. It is designed for embedded applications that need 32-bit math performance and USB connectivity without the cost of Cortex-M4 devices. Key features include Peripheral Pin Select (PPS) allowing flexible remapping of digital peripherals to any I/O pin, a Parallel Master Port (PMP) for graphics interfaces with dual buffers, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and Real-Time Clock and Calendar (RTCC) with calendar mode. The device supports up to 50 MHz operation and includes JTAG and 2-wire programming/debug interfaces. The architecture combines a 5-stage pipeline MIPS32 core with a multi-vector interrupt controller and DMA for deterministic real-time response. With 83 DMIPS performance at 50 MHz and dedicated USB 2.0 full-speed OTG hardware, the PIC32MX230F128L family targets applications requiring USB connectivity, audio codec interfacing, and modest processing throughput without external peripherals. Typical applications include USB audio devices, capacitive touch human-machine interfaces (HMI), industrial control with USB, low-cost graphics terminals using PMP, sensor hubs with USB, and consumer USB peripherals. The wide peripheral integration reduces bill of materials by eliminating external codec, touch, and USB interface ICs. Design consideration: PPS greatly simplifies PCB layout by allowing remapping of UART, SPI, I2C and other peripherals after PCB layout is finalized - if a routing conflict arises, reassign pins in code rather than respinning the board. Always consult the I/O Multiplexing table in the datasheet for PPS limitations. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet - allowing engineers to evaluate second sources and PCB reuse opportunities across the PIC32MX1xx/2xx family.

見積もり お問い合わせ
PIC32MX230F128LT-I/PT - 32-bit MCU 128KB Flash 100-TQFP | Microchip
PIC32MX230F128LT-I/PT

PIC32MX230F128LT-I/PT - 32-bit MCU 128KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MX230F128LT-I/PT is a 32-bit PIC microcontroller based on the MIPS32 M4K core, delivering 83 DMIPS at up to 50 MHz, packaged in a 100-pin TQFP (12x12 mm) form factor. It integrates 128 KB of Flash program memory and 16 KB of SRAM, providing ample headroom for connected-embedded applications that require TCP/IP stacks, USB device firmware, or graphical user-interface libraries. The on-chip peripherals include two I2S interfaces, four SPI/I2S modules, USB 2.0 full-speed device, a 10-bit 1 Msps ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a fixed set of peripherals (timers, ADCs, communication interfaces). The PIC32MX230 belongs to the broader PIC32 family, which sits in Microchip's 32-bit MCU hierarchy alongside ARM Cortex-M based SAM and dsPIC signal controllers. Within the system hierarchy, MCUs are a sub-category of microprocessors and semiconductors, designed to be the central processing element of an embedded system. Key features of the PIC32MX230F128LT-I/PT include Peripheral Pin Select (PPS) which allows remapping of digital functions to a wide range of physical pins, a Parallel Master Port (PMP) with dual read/write buffers for graphics LCD or external memory interfacing, and a Real-Time Clock and Calendar (RTCC) module. The device operates across an industrial temperature range of -40C to +85C and is supported by MPLAB X IDE, MPLAB Harmony, and a complete GCC-based toolchain. Architecturally, the MIPS32 M4K core is a classic five-stage pipeline RISC design with hardware multiply/divide and a single-cycle shift unit, giving the PIC32MX230 a deterministic interrupt latency. The on-chip CTMU converts capacitance to time, allowing the same I/O pin to serve as a touch key, slider, or proximity sensor. PPS remapping and the dual-buffered PMP reduce pin-count pressure on the 100-pin TQFP. Typical applications include USB audio peripherals (USB headsets, USB microphones), industrial HMI panels with TFT-LCD and capacitive touch, home-automation bridges (Zigbee/WiFi gateway host), low-cost instrument front-ends with TFT display, and motor-control user-interface co-processors. The 128 KB Flash and 16 KB SRAM are sized for FreeRTOS or Micrium OS-II plus a USB stack. When designing with this device, confirm that the chosen RTOS and middleware (e.g., MPLAB Harmony) fit within 128 KB of Flash after USB, graphics, and TCP/IP are included; budget approximately 64 KB for a Harmony USB Device + Graphics configuration. If your design later needs more headroom, the PIC32MX250/270/450/470 family provides the same peripherals in larger memory options. This page consolidates distributor pricing, drop-in 100-TQFP alternatives, and engineering design notes in one place, complementing the manufacturer datasheet.

見積もり お問い合わせ
PIC32MX230F128LT-V/PF - 32-bit MCU, 128KB Flash, USB | Microchip
PIC32MX230F128LT-V/PF

PIC32MX230F128LT-V/PF - 32-bit MCU, 128KB Flash, USB | Microchip

The Microchip PIC32MX230F128LT-V/PF is a 32-bit MIPS32 M4K microcontroller from the PIC32MX family, featuring 128 KB of flash and 16 KB of SRAM, and packaged in a 100-pin TQFP. It runs at up to 50 MHz (40 MHz on the -V speed grade), delivering 83 DMIPS of performance with hardware USB 2.0 full-speed support and integrated peripherals for analog, connectivity, and timing functions. What is a PIC32MX microcontroller? The PIC32MX family is Microchip's first line of 32-bit microcontrollers built around the MIPS32 M4K core architecture. As 32-bit microcontrollers, PIC32MX devices fall into the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> semiconductor. They bridge the gap between 8/16-bit PIC microcontrollers and 32-bit ARM Cortex-M devices, offering familiar PIC development tools (MPLAB X, Harmony) while delivering significantly higher throughput and addressable memory. Key features include USB 2.0 full-speed Device/Host/OTG with on-chip transceiver, Peripheral Pin Select (PPS) for flexible signal routing, two I2S and four SPI modules for audio and serial communications, a 10-bit ADC with up to 1 Msps conversion rate, and a Real-Time Clock Calendar (RTCC) module. The device also integrates a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, three analog comparators, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces. From an architectural standpoint, the PIC32MX230F128L uses Harvard architecture with separate instruction and data buses, 5-stage pipeline, hardware multiply/divide, and zero-overhead loop control. The MIPS32 M4K core supports both standard MIPS and microMIPS compressed instruction mode, enabling efficient code density. The device operates from 2.3V to 3.6V across the -40C to +105C automotive temperature range (V suffix). Typical applications include industrial automation (sensor interfaces, motor control), automotive body electronics (lighting, instrument clusters), USB peripherals (HID, CDC, custom devices), home automation and IoT nodes, consumer audio processing, and embedded HMI with graphic displays. The integrated USB transceiver eliminates the need for an external USB PHY, reducing BOM cost and PCB footprint. When designing with the PIC32MX230F128LT-V/PF, allocate decoupling capacitance of 100 nF per power pin pair and a bulk 10 uF tantalum or ceramic near the VDD/VSS planes. Use PPS to remap peripherals to physical pins, simplifying PCB layout. For USB applications, route the D+/D- lines as 90-ohm differential pair with matched lengths. The -V speed grade supports the wider automotive temperature window (-40C to +105C).

見積もり お問い合わせ