集積回路

A54SX08-2PLG84I

A54SX08-2PLG84I - SX FPGA 12K Gates 84-PLCC | Microsemi

The Microsemi A54SX08-2PLG84I is an SX-family antifuse Field Programmable Gate Array (FPGA) delivering 12,000 system gates (768 logic elements/blocks, 512 cells) with 69 user-programmable I/O pins and a toggle rate up to 320 MHz, housed in an 84-pin PLCC (J-Lead, 29.31 x 29.31 mm) package with industrial temperature range (-40C to +85C) indicated by the I suffix. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a matrix of configurable logic blocks and programmable interconnects that the designer wires together after manufacturing. Within the programmable logic hierarchy, the A54SX08 sits in the antifuse FPGA subcategory of programmable logic ICs - as opposed to SRAM-based FPGAs - meaning its configuration is permanent, non-volatile, and immune to configuration readback, which is why antifuse FPGAs are traditionally favored in defense, avionics, and secure industrial systems. Key features include dual-rail supply operation (3.0V to 3.6V core and 4.75V to 5.25V VCCPLS programming/5V-tolerant I/O operation per the SX family), 0.35 um CMOS antifuse process technology, C-cell logic modules supporting 9-bit parity-tree functions with 2 ns propagation delays, and speed grade -2 timing. The 320 MHz system toggle capability suits state machines, glue logic consolidation, bus interfacing, and address decoding. The SX architecture uses a sea-of-modules structure that is synthesis friendly, simplifying implementation in standard HDL flows. Because configuration data is stored in antifuse elements, no external configuration PROM is required, reducing BOM count and eliminating boot-time configuration delays - a distinct advantage over SRAM FPGAs in power-cycled systems. Typical applications include industrial control, telecommunications line cards, embedded glue logic, and legacy avionics subsystem upgrades where the 84-PLCC through-hole-style J-lead package aids solder joint inspection. Design consideration: the dual supply rails mean the PCB must route both 3.3V and 5V domains; verify I/O voltage compatibility against the SX family datasheet before mixing 5V and 3.3V signaling on the same bank. This page synthesizes distributor pricing, same-family drop-in packaging and speed-grade alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-03.

見積もりお問い合わせ

A54SX08-2PQG208

A54SX08-2PQG208 - SX FPGA 8K Gates 208-PQFP | Microsemi

The Microsemi (Microchip) A54SX08-2PQG208 is an 8,000-gate Actel SX-family antifuse FPGA with 512 modules, up to 320 MHz system performance and dual 3.3V/5V supply operation, housed in a 208-pin PQFP (28x28 mm) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer wires together after manufacturing, sitting in the hierarchy below ASICs and above CPLDs in gate density. The SX family uses a patented metal-to-metal antifuse programmable interconnect, which means configuration data is permanent: unlike SRAM FPGAs, no configuration PROM or boot sequence is required, and the programmed bitstream is inherently secure and single-event-immune compared to volatile architectures. Key features include approximately 130 user I/Os on the 208-pin package, 768 configurable logic modules, dual-rail operation at 3V~3.6V and 4.75V~5.25V, and fast pin-to-pin timing that simplifies system interfacing. The 0.35um CMOS process delivers deterministic, routing-independent delays, a hallmark of the SX architecture that appeals to designers migrating ASIC or PAL/GAL designs. Typical applications include industrial control logic, glue logic integration and system consolidation, telecommunications line-card control, and legacy avionics or defense hardware sustainment where the one-time-programmable antifuse is preferred over SRAM reprogrammability. Designers should note that this commercial-temperature-grade part (0C to +70C) is factory-programmed by the manufacturer using the Designer software netlist flow, so the design must be finalized before ordering. Pin-to-pin family migration within the SX/SX-A/SX-S lines in the same 208-PQFP footprint allows gate-count upgrades without board redesign. This page consolidates verified distributor specifications, drop-in alternatives, pricing tiers, and design notes not found in the manufacturer datasheet, per data gathered as of 2026-09-03.

見積もりお問い合わせ

A54SX08-2PQG208I

A54SX08-2PQG208I - 12K Gate SX FPGA 130 I/O PQFP-208 | Microsemi

The Microsemi (Microchip Technology) A54SX08-2PQG208I is a 12,000-system-gate antifuse FPGA from the Actel SX family with 512 logic cells, 130 user I/O pins, and a maximum toggle rate of 320 MHz, housed in a 208-pin PQFP (28x28 mm) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements custom digital logic through programmable interconnect and logic modules. The SX family uses a sea-of-modules antifuse architecture, which means the programming connections are one-time-programmable rather than SRAM-based. This places the SX family in the broader hierarchy of programmable logic: FPGA -> programmable logic device -> digital IC -> semiconductor. Antifuse FPGAs are non-volatile by nature, requiring no configuration PROM and offering inherent resistance to configuration readback. Key features of the A54SX08-2PQG208I include a dual supply voltage arrangement of 3.0V to 3.6V (core) and 4.75V to 5.25V (I/O), which supports 5V-tolerant legacy system interfaces. The 0.35um CMOS process delivers deterministic sub-nanosecond-class routing delays, and the '-2' speed grade denotes the faster of the family's standard speed bins. The industrial temperature grade ('I' suffix) supports -40C to +85C operation. The sea-of-modules architecture eliminates the segmented routing delays of SRAM FPGA architectures, giving designers predictable timing that simplifies high-speed state machine and datapath design. Because programming is antifuse-based, the device is secure against design extraction and draws near-zero static configuration current. Typical applications include industrial control and automation, bridge and interface logic between 5V legacy buses and 3.3V subsystems, telecommunications line-card glue logic, and military/aerospace systems that require one-time-programmable, configuration-free FPGAs. When designing with this part, plan the power budget around the dual-rail requirement and verify that your programming programmer supports the SX family antifuse flow. This page synthesizes distributor availability data, drop-in speed-grade and temperature-grade alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-2TQG144

A54SX08-2TQG144 - 8K Gate SX FPGA 144-TQFP | Microsemi

The Microsemi (Microchip) A54SX08-2TQG144 is an SX-family antifuse Field Programmable Gate Array (FPGA) with 8K system gates, 512 logic cells, and 113 user I/O pins in a 144-pin TQFP (20x20 mm) surface-mount package. The -2 speed grade supports toggle rates up to 320 MHz on 0.35 um antifuse CMOS technology, with dual 3.3V and 5V supply operation (3.0-3.6V core/I/O and 4.75-5.25V ranges). An FPGA (Field Programmable Gate Array) is a semiconductor device containing an array of programmable logic blocks and reconfigurable interconnects that the designer wires together after manufacturing. Within the programmable logic hierarchy, the SX family sits under Actel/Microsemi antifuse FPGAs, one-time programmable (OTP) devices that sit alongside FPGA -> programmable logic -> digital IC in the component taxonomy. Key features include one-time-programmable antifuse architecture with live-at-power-up operation and no configuration PROM, 768 logic array blocks (LABs), pin-to-pin family scalability, and a matte-tin lead finish. Antifuse programming also improves immunity to configuration corruption, a key reliability advantage over SRAM FPGAs in harsh environments. Architecturally, the SX family uses a sea-of-modules grid with combinational and sequential logic cells connected through segmented antifuse routing. The 0.35 um process yields predictable timing; the -2 grade provides the fastest commercial speed bin, and the 5V-tolerant I/O simplifies interfacing to legacy 5V TTL systems. Typical applications include industrial control glue logic, bus interface bridging, communications and networking line cards, and aerospace/defense designs needing OTP configuration. The 144-TQFP balances I/O count and board area for mid-density designs. Design consideration: antifuse devices are OTP, so reserve spare logic and I/O in your design and fully validate the netlist before programming, since a programming error cannot be corrected in-circuit. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-2TQG144I

A54SX08-2TQG144I - SX FPGA 8K Gates 144-TQFP | Microsemi

The Microsemi A54SX08-2TQG144I is an SX-family antifuse Field Programmable Gate Array (FPGA) with 8,000 system gates, 512 logic cells, a system performance of up to 320 MHz, and 113 user I/O pins, housed in a 144-pin TQFP (20x20 mm) industrial package. It operates from dual supply rails of 3.3V (3.0V to 3.6V) and 5V (4.75V to 5.25V). An FPGA (Field Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer programs after manufacturing. Within the programmable logic hierarchy, FPGAs sit above CPLDs and SPLDs in logic density and are classified as programmable logic ICs or embedded FPGAs. The Actel SX family pioneered a sea-of-modules antifuse architecture that delivers ASIC-like performance and integration levels, making it distinct from SRAM-based FPGAs because programming is permanent, radiation-tolerant by nature, and requires no configuration boot device. Key features of the A54SX08-2TQG144I include the -2 speed grade for high system clock rates up to 320 MHz, 0.35um antifuse process technology, industrial temperature rating (I suffix, -40C to +85C operating range), and dual 3.3V/5V supply operation that simplifies integration into mixed-voltage legacy systems. The 0.5 mm pin pitch TQFP package enables conventional surface-mount assembly. Technically, the sea-of-modules architecture uses a proprietary antifuse interconnect that adds negligible routing delay compared to SRAM-switch FPGAs, giving deterministic, low-jitter timing. Logic density of 8K gates suits state machines, bus interfaces, glue logic consolidation, and high-speed control paths where flash- or SRAM-based devices cannot meet timing. Typical applications include industrial automation control, telecommunications line cards, military/aerospace subsystems requiring non-volatile instant-on logic, and legacy 5V system upgrades. Design consideration: antifuse devices are one-time programmable - there is no in-system reprogramming, so complete design verification before programming is essential. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-2TQG176I

A54SX08-2TQG176I - SX FPGA 12K Gates 176-TQFP | Microsemi

The Microsemi (Microchip Technology) A54SX08-2TQG176I is an SX-family antifuse FPGA with 12,000 system gates, 768 logic array blocks (LABs), 128 user I/O pins, and a -2 speed grade, housed in a 176-pin TQFP (24x24 mm) surface-mount package. It operates from 3.3V (3.0V to 3.6V) or 5V (4.75V to 5.25V) supplies and is fabricated in 0.35um CMOS technology. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements digital logic through configurable interconnects and logic blocks programmed by the designer rather than fixed at the silicon factory. The SX family uses Microsemi antifuse programming technology, which is one-time programmable (OTP), making configured logic non-volatile, immediately active at power-up, and inherently more resistant to configuration corruption than SRAM-based FPGAs. Key features of the A54SX08-2TQG176I include 512 logic cells organized into 768 LABs/CLBs, support for system clock rates up to 320 MHz in the SX family architecture, dual 3.3V/5V I/O operation enabling direct interfacing with legacy 5V TTL systems, and the industrial temperature-grade I suffix for extended-environment deployment. The -2 speed grade designation indicates a mid-range timing bin within the family, balancing propagation delay against cost. Technically, the SX architecture places flip-flops and combinational logic in efficient module cells, with 0.35um antifuse interconnect yielding low on-resistance paths and deterministic timing. Because configuration is stored physically in antifuse elements rather than loaded from an external flash, the design is protected from readback, supporting secure and high-reliability applications. Typical applications include industrial control logic, glueless bus interfacing between 5V and 3.3V subsystems, aerospace and defense support logic, and communications equipment state machines where instant-on operation is required. Design consideration: antifuse FPGAs are one-time programmable, so design changes require a new physical device; verify the bitstream thoroughly in simulation and with engineering-lot programming before committing production units. This page synthesizes distributor pricing context, drop-in alternatives from the same SX family, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-2VQG100

A54SX08-2VQG100 - SX FPGA 12k Gates 100-TQFP | Microchip

The Microchip Technology (Microsemi) A54SX08-2VQG100 is an SX-family antifuse Field Programmable Gate Array (FPGA) with 12,000 system gates, 768 logic elements, and 81 user I/O pins, housed in a 100-pin TQFP (14x14 mm, VQG100) surface-mount package. It operates from dual supply rails of 3V to 3.6V (core) and 4.75V to 5.25V (I/O), with speed grade 2 timing. An antifuse FPGA is a one-time-programmable logic device that forms permanent interconnects at programming time. Within the power-management hierarchy of programmable logic, the SX family sits among low-cost, high-reliability, non-volatile FPGAs: unlike SRAM FPGAs, it requires no configuration ROM, boots instantly at power-up, and resists configuration upset from radiation or power glitches, which is why antifuse FPGAs remain popular in aerospace, industrial, and long-lifecycle embedded systems. Key features of the A54SX08-2VQG100 include its SX logic architecture with 768 logic elements for moderate-density glue logic, control, and interface functions; 81 user I/O supporting legacy 5V-tolerant signaling via the 5V rail; and speed grade 2 performance suited to state machines, bus interfaces, and address decoding. The dual-rail architecture separates the 3.3V core from the 5V I/O supply, simplifying integration into older 5V bus systems. Technically, the SX family uses a sea-of-modules architecture with fine-grained combinational and sequential building blocks. Antifuse interconnect provides low on-resistance routing with no configuration memory, contributing to instant-on behavior, low static configuration risk, and long-term bitstream integrity over decades of deployment. Typical applications include industrial control and automation glue logic, telecommunications line-card interface bridging, legacy 5V system upgrades, test and measurement board logic, and defense/aerospace subassemblies where deterministic non-volatile configuration is required. When designing with this device, note that it is one-time programmable: prototype with the appropriate development flow (Libero SoC or legacy Designer software) before committing hardware, and plan I/O budgets since 81 user I/O is fixed per device. This page synthesizes verified distributor data, drop-in family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet, providing a single engineering-grade reference for the A54SX08-2VQG100.

見積もりお問い合わせ

A54SX08-2VQG100I

A54SX08-2VQG100I - SX FPGA 8K Gates 100-TQFP | Microsemi

The Microsemi (Microchip) A54SX08-2VQG100I is an SX-family antifuse FPGA with 8K system gates, 512 logic cells, 81 user I/Os, and a 320 MHz system performance rating in a 100-pin VQFP/TQFP surface-mount package, fabricated on a 0.35 um process and operating from 3.3V core supply with 5V-tolerant I/O capability. The industrial-grade I suffix covers operation from -40C to +85C. A field-programmable gate array (FPGA) is a semiconductor device containing programmable logic blocks and interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the FPGA sits above CPLDs in gate density and flexibility, and the SX family uses Actel antifuse technology, which is one-time programmable. Antifuse configuration data is permanently stored in silicon, giving the device inherent resistance to configuration readback, bit-flip errors from radiation, and cloning - a key advantage over SRAM FPGAs that load configuration from external memory at power-up. Key features of the A54SX08 include the proprietary Act-1/Act-2 style logic module architecture delivering 512 cells of combinational and sequential logic, 320 MHz internal toggle capability suited to state machines and glue logic, and dual-voltage operation of 3.3V and 5V that simplifies interfacing with legacy 5V TTL systems common in industrial and defense equipment. The one-time-programmable antifuse interconnect eliminates configuration PROMs, reducing bill-of-materials count and board area. Technically, the SX family's fine-grained architecture routes signals through a segmented routing fabric with low interconnect capacitance, which is the basis of its deterministic, predictable timing compared to coarser SRAM-based architectures. Designers implement designs using the Microsemi (Microchip) Libero SoC design suite, and timing analysis can be performed before layout because of the deterministic interconnect delays. Typical applications include industrial control glue logic, bridge and interface translation between 5V and 3.3V subsystems, secure or high-reliability control logic where configuration data must not be read out, and obsolescence-driven redesigns replacing multiple discrete TTL/CMOS devices with one FPGA. A key design consideration: because the device is one-time programmable, the bitstream cannot be updated in the field - verify the design thoroughly in simulation and hardware testing before programming, and include an I/O margin plan for the 5V-tolerant interface banks. This page synthesizes verified distributor specifications, same-family drop-in variants, practical design notes, and lifecycle context not consolidated on the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-FG144

A54SX08-FG144 - 8K Gate FPGA, 111 I/O, 144-BGA | Microchip

The Microchip Technology A54SX08-FG144 is an 8K-system-gate FPGA from the Actel SX family, featuring 512 logic cells, up to 111 user I/O, a maximum toggle-rate-derived clock performance of 240 MHz, and a 0.35 um CMOS process with 3.3V/5V tolerant I/O operation, all housed in a 144-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and interconnects that the designer programs after manufacturing. Within the programmable-logic hierarchy, the SX family occupies the high-speed antifuse segment: device -> FPGA -> antifuse FPGA -> Actel/Microchip SX family. Unlike SRAM-based FPGAs, antifuse FPGAs are non-volatile and configure once, which makes them resistant to configuration upset and unsuitable for repeated reprogramming. Key features include 8,000 system gates organized as 512 cells in a sea-of-modules architecture, 111 user-input/output capability on the 144-ball package, I/O operation from 3.3V and 5V supply domains, and high-speed performance suited to state machines, bus bridging, and glue logic consolidation. The sea-of-modules architecture delivers routing efficiency and deterministic timing that simplify high-speed design closure. Technically, the SX family is fabricated on a 0.35 um CMOS process and uses Actel's antifuse interconnect, which provides low on-resistance, low parasitic capacitance routing segments. This yields higher toggle rates and lower interconnect delay than contemporary SRAM routing switches, contributing to the family's 240 MHz class performance in performance-intensive applications. Typical applications include industrial automation control, telecommunications and networking interface logic, military/aerospace systems requiring one-time-programmable non-volatile configuration, and embedded bridge or protocol-glue logic where 5V-tolerant I/O eases interfacing with legacy circuits. Designers should note that antifuse devices are one-time programmable: the design must be finalized before programming, and design iterations require a new device. Choose the -I temperature-grade suffix (A54SX08-FG144I) for industrial -40C to +85C environments. This page synthesizes distributor inventory data, drop-in same-family alternatives, design notes, and an AEO-optimized FAQ not found together on the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-FG144I

A54SX08-FG144I - 8K Gate SX FPGA 144-FBGA | Microchip

The Microchip (Microsemi/Actel) A54SX08-FG144I is an 8,000-system-gate antifuse FPGA from the SX family, offering 512 logic cells, system performance up to 240 MHz, and 111 user I/O in a 144-ball FBGA (FG144) package with industrial temperature rating of -40C to +85C. The device operates from a 3.3V core with 5V-tolerant I/O capability and is fabricated on a 0.35 um process. A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks and interconnects that the designer programs to implement custom digital circuits. The SX family sits within the broader programmable logic hierarchy as a high-speed, one-time-programmable (OTP) antifuse FPGA family, positioned for performance-intensive glue logic, bus bridging, and system integration tasks where SRAM FPGAs would need external boot configuration devices. Key differentiating features of the A54SX08-FG144I include the Actel sea-of-modules architecture, which delivers ASIC-like routability and predictable timing; the antifuse programming technology, which is non-volatile, rugged, and immune to configuration readback attacks; and 5V-tolerant I/O that simplifies interfacing with legacy 5V systems. The 240 MHz system-level toggle capability makes it suitable for high-throughput datapath functions. Technically, the SX family uses a fine-grained sea-of-modules array of C-cells (combinational logic) and R-cells (registers), with a routing fabric implemented in metal layers above the antifuse program elements. The 0.35 um CMOS process provides a stable, mature silicon platform. Programming is performed once at programming stations (e.g., Silicon Sculptor), after which the configuration is permanent and power-on immediate - no configuration PROM or configuration time is required. Typical applications include industrial control and automation, military and avionics subsystems, telecommunications line cards, bus interface and bridge logic, and refresh or redesign of legacy systems that originally used the Actel SX family. The 111 available user I/O covers wide parallel bus interconnection in a compact 144-ball package. A key design consideration: because antifuse FPGAs are one-time programmable, designers must fully verify the design in simulation before committing silicon, and a reprogramming cycle requires a new physical device. Plan spare devices into the build budget. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet, providing procurement and engineering teams a single reference for the A54SX08-FG144I.

見積もりお問い合わせ

A54SX08-FGG144

A54SX08-FGG144 - SX FPGA 8K Gates 144-FBGA | Microchip

The Microchip Technology A54SX08-FGG144 (originally Actel/Microsemi) is an SX-family antifuse FPGA with 8K system gates, 512 logic cells, a maximum toggle rate of 240 MHz, and 111 user I/Os, housed in a 144-ball FBGA (LBGA) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements custom digital logic through programmable interconnect and configurable logic blocks. Within the programmable logic hierarchy, the SX family occupies the high-performance, non-volatile segment: unlike SRAM FPGAs, its antifuse fabric is programmed once at the factory or in-house, retains configuration through power cycles, and needs no configuration PROM or boot sequence. This makes it a direct ancestor of the modern power-management and logic-integration role played by one-time-programmable FPGAs in aerospace and industrial systems. Key features of the A54SX08-FGG144 include a 0.35 um antifuse process technology, dual supply operation (core at 3.3V with 5V-tolerant I/O support per the 3.3V/5V operating ranges of 3V-3.6V and 4.75V-5.25V), and a sea-of-modules architecture that delivers high routing efficiency and predictable timing. With 768 LABs and 512 logic cells, it suits moderate-density glue logic, bus interfacing, and state-machine integration. The architecture uses Actel's proprietary antifuse interconnect, which adds near-zero parasitic capacitance on programmed paths - the reason SX devices achieve 240 MHz-class system performance in a mature process node. Non-volatility also yields instant-on behavior and strong resistance to configuration corruption, a key reliability benefit in harsh environments. Typical applications include industrial control and automation glue logic, communication bridge functions, legacy aerospace/defense subsystem upgrades, and power-on-critical control paths where a bitstream-loading FPGA is unacceptable. Design consideration: as a one-time-programmable device, any logic change requires a new programmed part - prototype thoroughly with simulation and, where possible, reserve the industrial-temperature A54SX08-FGG144I variant for extended-environment builds. This page synthesizes verified distributor data, drop-in replacement analysis, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-FGG144I

A54SX08-FGG144I - 8K Gate SX FPGA 240MHz 144-FBGA | Microchip

The Microchip (Microsemi) A54SX08-FGG144I is an SX-family field programmable gate array (FPGA) with 8,000 system gates, 512 logic cells, up to 111 user I/O, and 240 MHz internal performance, housed in a 144-ball fine-pitch FBGA (FGG144) package and rated for the industrial temperature range of -40C to +85C. An FPGA (field programmable gate array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the FPGA sits above CPLDs and below ASSPs/ASICs in integration, and the SX family belongs to the antifuse-based, nonvolatile class of FPGAs, meaning the configuration is permanently set at programming time and is retained without a configuration PROM or boot sequence. Key features of the A54SX08-FGG144I include a sea-of-modules architecture delivering up to 320 MHz internal toggle performance, 3.7 ns clock-to-out (pin-to-pin), 0.1 ns input setup, and 0.25 ns clock skew, making it suitable for high-speed glue logic, state machines, and interface bridging. The device is fabricated on a 0.35 um CMOS process and supports both 3.3 V and 5 V operating supply voltages, which simplifies integration into legacy 5 V industrial backplane systems alongside modern 3.3 V logic. The SX family's antifuse architecture provides two significant engineering advantages over SRAM FPGAs: the configuration is inherently nonvolatile and secure, and there is no need for external boot memory, reducing board area and configuration time to zero. Logic is implemented in efficient combinational and sequential modules that allow single-chip integration of functions previously requiring multiple CPLDs, with the datasheet highlighting 66 MHz PCI integration as a single-chip solution. Typical applications include industrial automation control, 66 MHz PCI interface bridging, telecommunications line-card glue logic, military/aerospace subsystems requiring nonvolatile configuration, and obsolescence-mitigation redesigns of legacy Actel-based designs. Designers should note that antifuse FPGAs are one-time programmable; a change in the netlist requires a new device, so reserve sufficient I/O margin and simulate thoroughly before committing. The 144-FBGA package requires careful ball-map verification against the latest Microchip datasheet before layout. This page synthesizes distributor availability data, drop-in same-footprint alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet alone.

見積もりお問い合わせ

A54SX08-PLG84I

A54SX08-PLG84I - 8K Gate SX FPGA 69 I/O PLCC-84 | Microchip

The Microchip Technology (Microsemi/Actel) A54SX08-PLG84I is a member of the Actel SX family of field programmable gate arrays (FPGAs) offering 8000 equivalent system gates, 512 logic cells (768 CLBs), 69 user I/O, and a maximum toggle rate of 240 MHz in an 84-pin PLCC (J-Lead) surface-mount package measuring 29.31 x 29.31 mm. It operates from a dual supply of 3.0 V to 3.6 V and 4.75 V to 5.25 V and is rated for the industrial temperature range. An FPGA (Field Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that the designer wires together after manufacturing, unlike fixed-function ASICs. Within the programmable logic hierarchy, the SX family sits among antifuse-based one-time-programmable FPGAs, positioned above CPLDs in gate density and below modern SRAM FPGA families in capacity. The SX family uses a sea-of-modules architecture on a 0.35 um CMOS process, delivering ASIC-like performance and integration levels that Actel claimed were not achieved by other FPGA architectures of its era. Because the programming element is antifuse-based rather than SRAM-based, the configuration is retained permanently, requires no external boot PROM, and is inherently resistant to configuration upset - key reasons this family remains in long-lifecycle industrial, aerospace-adjacent, and defense-heritage designs. Combinatorial CLB delay is as low as 0.8 ns on faster speed grades, supporting performance-intensive glue logic, state machines, and bus-interface functions. Typical applications include legacy industrial control and automation boards, telecom line-card glue logic, motion-control sequencers, test and measurement backplanes, and obsolescence-management re-sourcing of 1990s-2000s programmable logic designs that cannot justify a board respin. When designing with this device, note the dual-rail power requirement (3.3 V core/5 V or 3.3 V I/O operation) and the one-time-programmable nature of the antifuse fabric - a programming error renders the device unusable, so design freeze and simulation sign-off should precede programming. This page synthesizes distributor availability, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-PQG208

A54SX08-PQG208 - 8K-Gate SX FPGA, 208-Pin PQFP | Microsemi

The Microsemi (now Microchip Technology) A54SX08-PQG208 is an 8,000-equivalent-gate Actel SX-family antifuse FPGA offering up to 130 user I/Os in a 208-pin Plastic Quad Flatpack (PQFP/BFQFP, 28x28 mm) package. It operates from dual supply rails of 3.0 V to 3.6 V (core) and 4.75 V to 5.25 V, and supports system clock rates up to approximately 240-280 MHz depending on speed grade. A field-programmable gate array (FPGA) is a semiconductor device containing an array of configurable logic blocks (CLBs) and programmable interconnects that the designer wires together to implement custom digital hardware. Within the programmable logic hierarchy, the SX family occupies the high-speed, sea-of-modules segment, using antifuse technology rather than SRAM configuration cells. Key features include the Actel sea-of-modules architecture delivering gate-array-like performance, non-volatile antifuse programming that requires no configuration PROM and provides inherent resistance to configuration corruption, 512 logic modules in approximately 8K usable gates, and a broad 130-I/O budget in a surface-mount quad flatpack. Technically, the device is fabricated on a 0.35 um CMOS process. The antifuse architecture yields low routing delay and deterministic timing, historically making SX devices popular in high-reliability, military, and industrial systems where instant-on behavior and design security matter. Typical applications include glue-logic consolidation, bus interfacing and bridging, industrial control sequencing, and aerospace/defense subsystems that previously relied on the Actel SX family. Design consideration: antifuse FPGAs are one-time programmable - validate the bitstream thoroughly in simulation and on engineering silicon before production programming. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-PQG208I

A54SX08-PQG208I - 8K Gate FPGA 130 I/O 208-PQFP | Microsemi

The Microsemi (Microchip) A54SX08-PQG208I is an Actel SX-family field programmable gate array (FPGA) delivering 8,000 equivalent system gates with 130 user I/Os in a 208-pin BFQFP (28x28 mm PQFP) surface-mount package. It operates from dual supply rails of 3V to 3.6V and 4.75V to 5.25V and is rated for industrial temperature ranges (I suffix). An FPGA (Field Programmable Gate Array) is a semiconductor device containing configurable logic blocks and programmable interconnects that the designer wires together after manufacturing. Within the power-management hierarchy of a digital system, the FPGA sits between fixed-function ASICs (zero flexibility, lowest unit cost) and CPLDs (small, fast, low density). The Actel SX family uses a sea-of-modules architecture with fine-grained combinational and sequential modules, achieving performance and integration levels that simplify design time and reduce power consumption for performance-intensive applications. Key features of the A54SX08 include antifuse-based one-time programmable configuration, which makes the configuration non-volatile and instantly active at power-up with no external configuration ROM or boot time. The SX sea-of-modules architecture supports high-speed, register-intensive designs, and the family is a well-established, proven solution for designs requiring long product lifecycles. Technical depth: the SX architecture combines C-cell (combinational) and R-cell (register) modules in a flexible routing fabric, giving high logic utilization per gate compared to SRAM FPGAs of the same era. The dual supply arrangement separates core and I/O power, supporting 3.3V and 5V I/O signaling environments. Typical applications include industrial control, networking and communications interfaces, mil-aerospace legacy designs, and high-reliability systems where instant-on configuration and design security matter. Design consideration: because antifuse FPGAs are one-time programmable, prototype thoroughly and reserve spare I/O and routing headroom in the floorplan. This page synthesizes verified distributor data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-TQ144

A54SX08-TQ144 - 12K Gate SX FPGA, 113 I/O | Microsemi

The Microsemi (Actel) A54SX08-TQ144 is a 12,000-gate SX-family antifuse FPGA with 113 user I/O, 768 logic modules (CLBs), and dual supply operation at 3V to 3.6V and 4.75V to 5.25V, housed in a 144-pin TQFP (LQFP, 20x20 mm, 0.5 mm pitch) surface-mount package rated for 0C to +70C commercial operation. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that engineers configure after manufacturing to implement custom digital circuits. Within the programmable logic hierarchy, the SX family sits among high-performance one-time-programmable (OTP) antifuse FPGAs, which contrasts with SRAM-based FPGAs that require external configuration memory. Key features include the sea-of-modules antifuse architecture that delivers ASIC-like performance with clock rates up to 320 MHz in speed-grade variants, non-volatile one-time programming that eliminates configuration boot time and protects designs from cloning, and 113 available user I/O for wide-bus interfacing. The antifuse fabric also reduces static power consumption compared to SRAM FPGAs and provides inherent resistance to configuration bitstream corruption. The SX architecture uses a combination of C-cells (combinatorial logic modules) and S-cells (sequential logic modules) organized into 768 cluster blocks, enabling deterministic, low-jitter routing suited to performance-intensive applications. Because the interconnect is programmed by blowing antifuse links, signal path delays are fixed after programming, simplifying timing closure versus reprogrammable fabrics. Typical applications include telecommunications line cards, industrial control logic, bus bridging, glue logic integration, and embedded systems requiring single-chip logic consolidation. The dual voltage domain support eases integration into legacy 5V and 3.3V mixed systems. Designers should note this specific part is marked Obsolete (EOL); new designs should select the active A54SX08-TQG144I variant, and production systems should secure remaining stock or qualify a pin-compatible alternative. This page synthesizes distributor availability, family drop-in variants, lifecycle status, and practical design guidance not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-TQG144I

A54SX08-TQG144I - SX FPGA 12K Gates 144-TQFP | Microsemi

The Microsemi (Microchip) A54SX08-TQG144I is an SX-family antifuse field programmable gate array (FPGA) providing approximately 12,000 usable gates, 768 logic module LABs/CLBs, and 113 user I/O in a 144-pin TQFP (20x20 mm) surface-mount package. It operates from dual supply rails of 3V to 3.6V (core) and 4.75V to 5.25V (I/O) and is rated for -40C to +85C industrial ambient temperatures. An FPGA is a semiconductor device containing a fabric of configurable logic blocks and programmable interconnects that engineers configure in the field to implement custom digital circuits. Within the programmable logic hierarchy, the A54SX08 sits as a logic family member below higher-density FPGAs and above CPLDs, serving glue-logic, state-machine, and bus-interface roles in embedded systems. Key features include Actel's sea-of-modules antifuse architecture, which delivers deterministic, ASIC-like routing with no configuration-storage element to upset; up to 240 MHz system performance on 0.35 um process technology; and dual-voltage 3.3V/5V operation enabling direct interface with legacy 5V systems. The industrial temperature grade (suffix I) supports extended deployment environments. Technically, the antifuse fabric is one-time programmable: connections are permanently formed at programming, giving very low SwitchMatrix propagation delay, high resistance to configuration error and radiation effects, and instant-on operation with no external configuration PROM or boot sequence. This architecture makes SX devices popular where reliability and security matter more than reprogrammability. Typical applications include industrial control and automation, aerospace and defense subsystems, telecommunications line cards, and bridge/interfacing logic between processors and peripherals, where the 113 I/O and 12k-gate capacity cover moderate integration needs. Design consideration: because the device is one-time programmable, functional verification in the Libero/Designer tool flow should be thorough before programming; pin assignment must be finalized early since the 144-TQFP footprint cannot be reconfigured in the field. This page synthesizes distributor availability data, same-package drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-TQG176

A54SX08-TQG176 - 12K Gate SX FPGA 176-TQFP | Microchip

The Microchip Technology (Microsemi) A54SX08-TQG176 is an SX-family antifuse FPGA IC providing approximately 12,000 system gates (8K gates / 512 logic cells per Jotrin device listing), 128 user I/O, and up to 240 MHz system performance in a 176-pin TQFP (24x24 mm) surface-mount package. It operates from dual supply rails of 3.0 V to 3.6 V and 4.75 V to 5.25 V. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that the designer configures after manufacturing. Within the programmable logic hierarchy, the SX family sits under Actel antifuse FPGAs, which are one-time-programmable (OTP) devices; antifuse programming gives them inherent resistance to configuration upset compared with SRAM-based FPGAs, making them a long-standing choice in high-reliability and industrial systems. Key features of the A54SX08 include the Actel sea-of-modules architecture, which delivers high logic utilization and deterministic timing; 0.35 um process technology; and a speed path supporting clock rates up to 240 MHz according to distributor listings. The dual-supply scheme separates core and I/O power, supporting mixed 3.3 V and 5 V system interfaces. Technical depth: the SX family implements combinational and sequential logic in C-cells and R-cells with dedicated fast carry chains and a hierarchical routing structure, allowing timing-critical paths to avoid long routing delays. Because the device is antifuse OTP, the configuration is permanent and powers up instantly without an external configuration ROM. Typical applications include industrial control and automation glue logic, communications and networking protocol bridges, test and measurement instrumentation, and military/aerospace-grade legacy system sustainment where the OTP fabric is preferred. Design consideration: as a one-time-programmable device, the design must be fully verified in simulation before programming, and a small number of spare devices should be planned for engineering iterations. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-TQG176I

A54SX08-TQG176I - 12K Gate FPGA, 128 I/O | Microsemi

The Microsemi (Microchip) A54SX08-TQG176I is an SX-family antifuse Field Programmable Gate Array (FPGA) providing 12,000 system gates with 128 user I/Os in a 176-pin TQFP (24x24 mm) package. It operates from a dual supply range of 3V to 3.6V and 4.75V to 5.25V and supports toggle rates up to 240 MHz on 0.35 um CMOS technology. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic cells and routing resources that the designer configures after manufacturing. Within the programmable logic hierarchy, the SX family is an antifuse-based FPGA: logic cells connect permanently at programming time, giving nonvolatile configuration, low standby power, and high immunity to configuration upsets compared with SRAM-based FPGAs, with no external configuration PROM required at power-up. Key features include 12,000 system gates (8K gates / 512 cells per the Jotrin listing), 128 user I/Os, 240 MHz maximum toggle frequency, and dual 3.3V/5V supply operation. The industrial temperature grade (suffix I) supports extended operating ranges suited to harsh environments, and the antifuse fabric eliminates configuration-loader logic and boot time entirely. The SX architecture uses a combination of logic modules (C-cells and S-cells) with dedicated fast carry chains and a segmented routing mesh. The 0.35 um CMOS process balances speed with the high density achievable in antifuse technology. The dual-voltage design allows the I/O structure to interface with both 5V-tolerant legacy systems and 3.3V logic, simplifying mixed-voltage board designs common in industrial and defense equipment. Typical applications include industrial control and automation, telecom and datacom line-card glue logic, military/aerospace upgrades of legacy board designs, and test equipment where nonvolatile, instant-on programmable logic is required. The antifuse fabric is favored where SRAM configuration volatility and configuration time are unacceptable. Design consideration: antifuse devices are one-time programmable - a design change requires a new physical part, so budget spare devices and verify the bitstream thoroughly on development silicon before committing to production. The 176-TQFP (24x24 mm) footprint also demands attention to lead coplanarity during reflow. This page synthesizes verified distributor data, drop-in same-package alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-VQ100

A54SX08-VQ100 - SX FPGA 8K Gates 100-TQFP | Microsemi

The Microsemi (Actel, now Microchip) A54SX08-VQ100 is an SX-family antifuse FPGA with 8,000 system gates, 512 logic modules, up to 240 MHz system performance, and 81 user I/Os, housed in a 100-pin TQFP/VQFP (14x14 mm) package. It operates from dual supply rails of 3.0 V to 3.6 V and 4.75 V to 5.25 V. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that designers configure after manufacturing. Unlike SRAM-based FPGAs, the Actel SX family uses antifuse programmable interconnect, which is one-time programmable: the configuration is permanent, immune to configuration readback attacks, needs no external boot flash, and powers up instantly with the design already loaded. The SX family features a sea-of-modules architecture delivering ASIC-like density and performance. The A54SX08 offers 0.35 um process technology, 512 register cells, toggle rates to 240 MHz, and a flexible I/O structure supporting 3.3 V and 5.0 V signaling. The antifuse fabric also yields very low static power and high resistance to SEU configuration upsets compared with SRAM FPGAs. Architecturally, the SX device is organized as an array of logic modules surrounded by horizontal and vertical routing channels, with dedicated clocks and I/O modules around the periphery. Logic is implemented in combinatorial and sequential modules that map efficiently from Verilog or VHDL via the Actel/Microchip Libero design flow. Typical applications include glue logic integration, bus bridging, industrial control, communications line cards, mil-aerospace sub-systems, and replacement of multiple discrete 74-series devices where boot-time, security, and radiation tolerance of configuration matter. A key design consideration is that antifuse devices are one-time programmable: prototype carefully and reserve spare gates and I/Os for late changes, since the programmed device cannot be reconfigured in-system. This page synthesizes verified distributor data, cross-reference findings, pricing guidance, and drop-in alternative analysis not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08-VQG100

A54SX08-VQG100 - SX FPGA 8K Gates 81 I/O TQFP-100 | Microsemi

The Microsemi (Microchip) A54SX08-VQG100 is an SX-family antifuse FPGA offering 8,000 system gates, 512 logic cells, and up to 81 user I/O in a 100-pin TQFP (VQFP 14x14 mm) surface-mount package. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements custom digital logic through programmable interconnect and configurable logic blocks. Within the programmable logic hierarchy, the device sits under FPGAs -> programmable logic ICs -> logic ICs -> semiconductors. The Actel SX family uses a sea-of-modules antifuse architecture: programming connections are permanent one-time fuses, so the configuration is retained with no external configuration ROM and no boot time, a key distinction from SRAM-based FPGAs. Key features include 8K usable gates in 512 module cells, a system frequency capability up to 240 MHz enabled by the 0.35 um process, and dual supply rails of 3.0 V to 3.6 V (core) and 4.75 V to 5.25 V (I/O), allowing 5 V-tolerant system interfacing. The antifuse fabric provides low routing delay and strong resistance to configuration upset compared with SRAM technology. Architecturally, the SX family's sea-of-modules structure delivers gate utilization and speed not typically achieved by SRAM FPGA architectures of its era, with short, deterministic interconnect paths that simplify timing closure in performance-intensive designs. Typical applications include industrial control glue logic, bus interface bridging, 5 V legacy system migration, communication equipment line cards, and aerospace/defense designs that benefit from non-volatile, single-chip configuration. Design consideration: antifuse devices are one-time programmable - verify the design completely in simulation before programming, and reserve engineering samples for iteration. This page synthesizes verified distributor data, drop-in alternative cross-references, pricing tiers, and practical design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08A-1TQG100

A54SX08A-1TQG100 - 12K Gate SX-A FPGA TQFP-100 | Microchip

The Microchip Technology (Microsemi) A54SX08A-1TQG100 is an SX-A family antifuse FPGA with 12,000 system gates (approximately 8,000 typical gates), 768 configurable logic blocks (768 cells), and a toggle rate of 278 MHz, fabricated on a 0.25 um CMOS process and operating from a 2.5 V supply in a 100-pin TQFP (LQFP) package with 81 user I/O. A field-programmable gate array (FPGA) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that a designer wires together to implement custom digital logic. Within the programmable logic hierarchy, an FPGA sits above SPLDs and CPLDs and below full-custom ASICs, offering ASIC-like integration without mask-tooling costs. The SX-A family uses antifuse (Act-3 style) programming technology: connections are permanently formed at programming time, giving non-volatile, radiation-tolerant, single-chip operation with no external configuration memory and inherently better security and SEU immunity than SRAM-based FPGAs. Key features of the A54SX08A include the 12,000-gate (768 CLB) array, 278 MHz system toggle frequency, low 2.5 V core supply for reduced power consumption, 81 available user I/O on the 100-pin TQFP, and lead-free, RoHS-compliant packaging. The -1 speed grade denotes the standard commercial speed bin of the SX-A family. As an antifuse device, it is one-time programmable, which eliminates configuration boot time and reduces bill-of-materials count versus SRAM FPGAs that require a serial configuration flash. Architecturally, the SX-A array consists of a sea of C-cells and S-cells organized into 768 CLBs, connected through segmented routing channels. This fine-grained, antifuse-switched fabric delivers deterministic timing, making it well suited to glue logic consolidation, bus bridging, state machines, and control-plane functions. Typical applications include industrial control systems, consumer electronics, communications and networking interface bridging, military/aerospace logic requiring high security, and single-chip integration of multiple discrete logic devices to reduce board area and cost. Design consideration: because the device is one-time programmable, functional verification in simulation (Libero or Designer software) must be exhaustive before programming; speed grade and temperature range suffixes must match the application environment. This page synthesizes distributor availability data, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08A-1TQG100I

A54SX08A-1TQG100I - 12K-Gate SX-A FPGA 81 I/O TQFP-100 | Microchip

The Microchip Technology A54SX08A-1TQG100I is an SX-A family antifuse FPGA with 12,000 system gates (approximately 8,000 typical gates), 768 logic modules, 81 user I/Os, and a -1 speed grade supporting toggle rates up to 278 MHz, housed in a 100-pin TQFP (TQG100) surface-mount package and rated for the industrial temperature range. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), routing resources, and programmable I/O cells that designers configure after manufacturing. Within the programmable logic hierarchy, the FPGA sits above CPLDs and SPLDs in density and capability, and the SX-A family uses antifuse programmability, which is one-time programmable (OTP) but non-volatile, secure, and instant-on at power-up. Key differentiating features include the antifuse fabric that removes configuration-boot delays and configuration-memory readback vulnerabilities, a 2.5V core supply with 0.25 um CMOS process technology, 278 MHz system-level performance, and low static power consumption. The 81 user I/Os support a range of single-ended signaling standards at the surrounding rail voltages, enabling glue logic, bus bridging, and control integration in a single chip. Architecturally, the SX-A fabric combines Combinatorial Modules and Register Modules organized into 768 module positions, with dedicated high-speed routing channels that deliver deterministic, predictable timing. The -1 speed grade is the baseline grade of the family; -2 and faster grades trade cost for higher toggle rates. Because antifuse interconnects are programmed once, the device resists bitstream extraction and survives power cycles without reconfiguration. Typical applications include industrial control and automation, telecommunications line-card glue logic, aerospace and defense subsystems that value configuration security, and bridge/control logic around microprocessors and ASICs in cost-sensitive systems. Design consideration: antifuse programming is permanent, so functional verification in simulation (Libero SoC design flow) and on bench prototypes is essential before production programming; plan I/O banking and power distribution around the 2.5V core with appropriate decoupling. This page synthesizes distributor pricing, drop-in alternatives, pin/package guidance, and practical design notes not found in the manufacturer datasheet.

見積もりお問い合わせ

A54SX08A-1TQG144

A54SX08A-1TQG144 - SX-A FPGA 12K Gates 113 I/O | Microchip

The Microchip Technology A54SX08A-1TQG144 is a 12,000-gate SX-A family Field Programmable Gate Array (FPGA) built on 0.25 um CMOS antifuse technology, operating at a 2.5 V core supply with a maximum toggle frequency of 278 MHz, and housed in a 144-pin Thin Quad Flat Pack (TQFP/LQFP, S-PQFP-G144) with 0.50 mm terminal pitch and 113 user I/Os. An FPGA (Field Programmable Gate Array) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable routing, allowing engineers to implement custom digital circuits after manufacturing. Within the programmable logic hierarchy, the A54SX08A sits in the low-to-mid density one-time-programmable (OTP) FPGA class, positioned below SRAM-based FPGAs but offering instant-on startup, no external configuration PROM, and inherent design security because the antifuse bitstream cannot be read back. Key features include 768 configurable logic cells (approximately 12,000 equivalent system gates, of which roughly 8,000 are typically usable), 113 available user I/O, and a supply range of 2.25 V to 5.25 V tolerance on the listed variant data with a nominal 2.5 V core. The SX-A architecture delivers deterministic, high-speed routing suitable for glue logic consolidation, state machines, and bus interface bridging at 100+ MHz. Technically, the device uses Microsemi/Microchip antifuse interconnect elements that permanently set routing at programming time, eliminating configuration time and single-event configuration-upset concerns in space- and security-sensitive systems. Speed grade -1 devices support system-level clocks up to 278 MHz on critical paths, and the 0.25 um process balances cost against performance. Typical applications include industrial control sequencing, telecommunications line-card glue logic, embedded system bus translation (PCI, VME companion logic), and defense electronics requiring instant-on, tamper-resistant programmable logic. Design consideration: because this is an OTP antifuse device, functional errors cannot be re-programmed in place; verify your design thoroughly in simulation and, ideally, with a development device before committing production units. This page synthesizes distributor pricing context, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

見積もりお問い合わせ

サブカテゴリ

製品 (32796)

A54SX08-2PLG84I - SX FPGA 12K Gates 84-PLCC | Microsemi

A54SX08-2PQG208 - SX FPGA 8K Gates 208-PQFP | Microsemi

A54SX08-2PQG208I - 12K Gate SX FPGA 130 I/O PQFP-208 | Microsemi

A54SX08-2TQG144 - 8K Gate SX FPGA 144-TQFP | Microsemi

A54SX08-2TQG144I - SX FPGA 8K Gates 144-TQFP | Microsemi

A54SX08-2TQG176I - SX FPGA 12K Gates 176-TQFP | Microsemi

A54SX08-2VQG100 - SX FPGA 12k Gates 100-TQFP | Microchip

A54SX08-2VQG100I - SX FPGA 8K Gates 100-TQFP | Microsemi

A54SX08-FG144 - 8K Gate FPGA, 111 I/O, 144-BGA | Microchip

A54SX08-FG144I - 8K Gate SX FPGA 144-FBGA | Microchip

A54SX08-FGG144 - SX FPGA 8K Gates 144-FBGA | Microchip

A54SX08-FGG144I - 8K Gate SX FPGA 240MHz 144-FBGA | Microchip

A54SX08-PLG84I - 8K Gate SX FPGA 69 I/O PLCC-84 | Microchip

A54SX08-PQG208 - 8K-Gate SX FPGA, 208-Pin PQFP | Microsemi

A54SX08-PQG208I - 8K Gate FPGA 130 I/O 208-PQFP | Microsemi

A54SX08-TQ144 - 12K Gate SX FPGA, 113 I/O | Microsemi

A54SX08-TQG144I - SX FPGA 12K Gates 144-TQFP | Microsemi

A54SX08-TQG176 - 12K Gate SX FPGA 176-TQFP | Microchip

A54SX08-TQG176I - 12K Gate FPGA, 128 I/O | Microsemi

A54SX08-VQ100 - SX FPGA 8K Gates 100-TQFP | Microsemi

A54SX08-VQG100 - SX FPGA 8K Gates 81 I/O TQFP-100 | Microsemi

A54SX08A-1TQG100 - 12K Gate SX-A FPGA TQFP-100 | Microchip

A54SX08A-1TQG100I - 12K-Gate SX-A FPGA 81 I/O TQFP-100 | Microchip

A54SX08A-1TQG144 - SX-A FPGA 12K Gates 113 I/O | Microchip