A54SX08A-1TQG144 - SX-A FPGA 12K Gates 113 I/O | Microchip
部品番号: A54SX08A-1TQG144 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1 | $1.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
A54SX08A-1TQG144 概要
An FPGA (Field Programmable Gate Array) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable routing, allowing engineers to implement custom digital circuits after manufacturing. Within the programmable logic hierarchy, the A54SX08A sits in the low-to-mid density one-time-programmable (OTP) FPGA class, positioned below SRAM-based FPGAs but offering instant-on startup, no external configuration PROM, and inherent design security because the antifuse bitstream cannot be read back.
Key features include 768 configurable logic cells (approximately 12,000 equivalent system gates, of which roughly 8,000 are typically usable), 113 available user I/O, and a supply range of 2.25 V to 5.25 V tolerance on the listed variant data with a nominal 2.5 V core. The SX-A architecture delivers deterministic, high-speed routing suitable for glue logic consolidation, state machines, and bus interface bridging at 100+ MHz.
Technically, the device uses Microsemi/Microchip antifuse interconnect elements that permanently set routing at programming time, eliminating configuration time and single-event configuration-upset concerns in space- and security-sensitive systems. Speed grade -1 devices support system-level clocks up to 278 MHz on critical paths, and the 0.25 um process balances cost against performance.
Typical applications include industrial control sequencing, telecommunications line-card glue logic, embedded system bus translation (PCI, VME companion logic), and defense electronics requiring instant-on, tamper-resistant programmable logic.
Design consideration: because this is an OTP antifuse device, functional errors cannot be re-programmed in place; verify your design thoroughly in simulation and, ideally, with a development device before committing production units.
This page synthesizes distributor pricing context, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: A54SX08A-1TQG144 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX08A-1TQG144 （同一形状・フットプリント） — 相違点: Package, Family, System Gates, Process Technology, Lead Free.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX08A-1TQG144I
✅ ドロップイン✓ 在庫あり
$19.9 / 個
データシートを見る →A54SX08A-2TQG144I
✅ ドロップイン✓ 在庫あり
$31.42 / 個
データシートを見る →A54SX08A-TQG144A
✅ ドロップイン✓ 在庫あり
$24.95 / 個
データシートを見る →A54SX08A-1TQG144M
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX08A-1TQG144A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX16A-1TQG144
✅ ドロップイン✓ 在庫あり
$118.5 / 個
データシートを見る →A54SX16A-1TQG144I
✅ ドロップイン✓ 在庫あり
$24.95 / 個
データシートを見る →A54SX08A-1TQG144 最大定格＆電気的特性
| Logic Cells (CLBs) | 768 |
| System Gates | 12000 |
| Typical Usable Gates | 8000 |
| Number of I/O | 113 |
| Max Clock Frequency | 278 MHz |
| Core Supply Voltage | 2.5 V |
| Supply Voltage Range | 2.25 V to 5.25 V |
| Technology | 0.25 um CMOS antifuse |
| Programmability | One-Time Programmable (antifuse) |
| Speed Grade | -1 |
| パッケージ | 144-TQFP (S-PQFP-G144), 0.50 mm pitch |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| Lead Free | Yes (lead-free per distributor listings) |
| Family | SX-A (Microsemi/Microchip) |
A54SX08A-1TQG144 144-tqfp (s-pqfp-g144), 0.50 mm pitch ピン配置ガイド
A54SX08A-1TQG144 (144-tqfp (s-pqfp-g144), 0.50 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX08A-1TQG144.
詳細は データシート をご参照ください。
主な用途
A54SX08A-1TQG144 の用途: 6 件s: Industrial Control and Automation, Defense and Secure Electronics, Glue Logic Consolidation, Telecommunications Line Cards, Bus Interface Bridging, Aerospace Avionics Companion Logic.
Industrial Control and Automation
In factory automation and industrial controllers, the A54SX08A-1TQG144 consolidates address decoding, sequencer state machines, and I/O handshaking that would otherwise occupy several PAL/GAL devices. Its 12,000-gate capacity and 113 user I/Os cover typical PLC companion-logic needs, while the 278 MHz maximum toggle frequency far exceeds the 10-50 MHz timing demands of industrial buses. Because the antifuse configuration is permanent, the FPGA starts functioning within microseconds of power application - critical for machinery requiring deterministic startup - and cannot be corrupted by power glitches or configuration-memory upset, improving uptime in electrically noisy motor-drive environments.
おすすめ
Defense and Secure Electronics
The A54SX08A-1TQG144 fits defense electronics where design security and instant-on behavior matter. Antifuse programming means the bitstream cannot be read back, protecting proprietary or mission-critical IP, and there is no SRAM configuration memory vulnerable to single-event or malicious upset. The device implements encryption key handling logic, sensor preprocessing, and bus interface bridges with deterministic 2.5 V core timing up to 278 MHz. Its permanent configuration also eliminates boot-time attack windows present in SRAM FPGAs. For programs requiring extended temperature screening, the -I and screened suffix variants in the same 144-TQFP footprint qualify without PCB redesign.
おすすめ
Glue Logic Consolidation
A primary use of the A54SX08A-1TQG144 is replacing dozens of 74-series logic devices, PALs, and GALs with one chip. With 768 logic cells and 113 I/Os, a single device absorbs address decoders, bus transceivers with parity, wait-state generators, and interrupt controllers, cutting BOM count, board area, and assembly cost. The SX-A family was explicitly positioned by Microchip for low-cost single-chip integration savings. Unlike CPLDs with fixed macrocell structures, the FPGA routing flexibly accommodates irregular logic, and the 0.25 um antifuse process provides cost-effective density for mid-complexity consolidation projects.
おすすめ
Telecommunications Line Cards
In telecom line-card designs, the A54SX08A-1TQG144 implements framer glue logic, backplane interface translation, and supervisory state machines between PHY devices and system processors. The 278 MHz toggle capability supports OC-3 class auxiliary clocking, and the permanent antifuse configuration ensures the card is operational the moment slots are powered - valuable in redundant, hot-swappable architectures. Its low NRE cost (no mask charges) makes it economical for mid-volume line cards, and the 144-TQFP with 0.50 mm pitch fits the dense card geometries typical of ATCA and legacy CompactPCI form factors.
おすすめ
Bus Interface Bridging
The A54SX08A-1TQG144 serves as a bridge between legacy system buses (VME, ISA, PC/104, PCI companion logic) and modern processors or ASICs. With 113 user I/Os, wide data paths up to 32 bits plus full address and control signaling route through one device, and the -1 speed grade's 278 MHz maximum toggle frequency covers 33 MHz PCI-class timing with margin. The one-time-programmable architecture guarantees fixed protocol timing behavior with no reconfiguration latency, which simplifies system certification. Designs that later outgrow 12,000 gates migrate to A54SX16A-1TQG144 on the identical PCB footprint without layout rework.
おすすめ
Aerospace Avionics Companion Logic
In avionics subsystems, the A54SX08A-1TQG144 provides ARINC 429 companion logic, discrete-to-digital conversion, and voter/comparator functions where deterministic, radiation-robust configuration is required. The antifuse fabric has no configuration bitstream to upset, giving inherent tolerance to configuration-corruption mechanisms compared with SRAM FPGAs, and instant power-up meets avionics BIT (built-in-test) timing budgets. The 2.5 V core keeps dynamic power low for constrained platforms, while 12,000 gates accommodate moderate protocol and monitoring logic. Temperature-screened -I and A-suffix variants in the same 144-TQFP support program qualification flows.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX08A-1TQG144 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX08A-1TQG144I | A54SX08A-2TQG144I | A54SX16A-1TQG144 | A54SX08A-TQG144A |
|---|---|---|---|---|---|
| Package | 144-TQFP (0.50 mm pitch) | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same | 144-TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 12000 | 12000 | 12000 | 24000 | 12000 |
| Core Supply Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
主な差別化要因
- Instant-on, tamper-resistant configuration （vs SRAM-based FPGAs (e.g., Xilinx XC4000-class))
- Lowest cost per gate in the SX-A TQFP-144 family （vs A54SX16A-1TQG144)
- Industrial temperature option without redesign （vs A54SX08A-1TQG144I)
- Timing headroom upgrade path （vs A54SX08A-2TQG144I)
設計ノート
The A54SX08A-1TQG144 is a one-time-programmable antifuse FPGA: once programmed, errors cannot be corrected in the field. Complete gate-level timing simulation of the routed netlist in Libero before programming production units, and validate the design on an engineering-lot device first. Budget for scrap/rework in yield calculations, and keep an unprogrammed spare-quantity buffer because a single mis-programmed device is unrecoverable.
The 2.5 V core supply must be clean and within tolerance at all times, including during programming. Provide local decoupling (100 nF ceramic per power pin group plus bulk 10 uF) and ensure the programming power supply can source required current. I/O bank voltage requirements depend on the selected I/O standard; consult the SX-A datasheet tables before assigning 3.3 V or 5 V tolerant standards to the 113 user I/Os.
The 144-TQFP has a 0.50 mm pin pitch - fine-pitch but hand-assemblable with care. Design land patterns per the Microchip recommended footprint in the family datasheet, and route I/O with controlled impedance where timing-critical buses exceed a few inches. The TQFP thermal pad is the package body; a modest 2x2 inch copper pour keeps junction temperatures safe at the low switching activity typical of glue-logic duty cycles. Estimated thermal performance: at ~0.25 W dissipation and roughly 60-90 C/W theta_JA typical for 144-TQFP, junction rise is only about 15-25 C above ambient.
For clocks near the 278 MHz toggle limit, use short, direct routes from the clock source to the dedicated clock-entry pins identified in the datasheet pin tables. Avoid daisy-chaining clock signals across I/O; SX-A clock resources provide low-skew global routing. Series-terminate (22-33 ohm) drive pins on long lines to reduce reflections and EMI with the 0.25 um output edge rates.
コンプライアンス情報
Distributor listings (DigiKey, Kynix, PCB Electronics) identify the part as Lead Free; the G-suffix conventionally denotes RoHS/lead-free packaging in Microchip nomenclature. Formal RoHS/REACH declarations should be obtained from Microchip.
