集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

LT1055CH - 6.5MHz Precision JFET Op Amp | Analog Devices
LT1055CH

LT1055CH - 6.5MHz Precision JFET Op Amp | Analog Devices

The Analog Devices LT1055CH is a precision, high-speed JFET-input operational amplifier with 6.5 MHz gain-bandwidth product, 16 V/µs slew rate, typically 50 µV offset voltage, and low input bias current, packaged in an 8-lead TO-5 metal can. It combines the high input impedance and low bias current associated with JFET inputs with the speed and precision required by demanding analog signal chains. A JFET-input operational amplifier is a voltage-feedback amplifier whose input stage uses junction field-effect transistors. This amplifier class provides very high input impedance, low input bias current, and low input-current noise while preserving accurate DC behavior. In the broader semiconductor hierarchy, the LT1055CH belongs to the operational-amplifier family within analog ICs and instrumentation amplification, where it is used to amplify low-level signals without loading the source. The LT1055 family combines several key performance features. Its maximum offset voltage is 150 µV, its typical offset drift is 1.2 µV/°C, and the verified specifications list guaranteed maximum drift as high as 4 µV/°C depending on temperature grade and conditions. Typical input bias current is 40 pA at 70°C and 500 pA at 125°C. These characteristics make the device suitable for precision current-to-voltage conversion, instrumentation, data acquisition, and feedback networks requiring low input current. With a 6.5 MHz gain-bandwidth product and 16 V/µs slew rate, the LT1055CH responds quickly enough for video, communications, active filtering, and pulse-processing circuits. Its JFET input stage avoids the substantially higher bias current commonly associated with bipolar input amplifiers, helping preserve accuracy in high-impedance sources. Precise common-mode, supply, noise, and input-current limits must still be selected from the manufacturer datasheet for the final design. Typical applications include precision transimpedance stages, low-leakage sensor interfaces, high-impedance buffer amplifiers, active analog filters, and communication-signal conditioning. In a transimpedance amplifier, the low bias current reduces current-error and settling effects. In an active filter, the combination of precision offset and 6.5 MHz bandwidth supports accurate signal processing over a useful frequency range. The primary design consideration is to preserve the LT1055CH's low-noise and low-offset benefits without overdriving the input or output stage. Designers should verify supply voltage, common-mode range, output swing, stability, and compensation requirements against the manufacturer datasheet before finalizing the circuit. PCB layout should keep sensitive input nodes short and provide adequate bypassing close to the supply pins. This page consolidates verified manufacturer specifications, distributor availability information, packaging details, source links, and engineering selection guidance. It distinguishes published LT1055/LT1056 family information from values that were not supplied by the verified sources, avoiding unsupported replacement or pricing claims.

見積もり お問い合わせ
LT1055S8 - Precision High-Speed JFET Op Amp | Analog Devices
LT1055S8

LT1055S8 - Precision High-Speed JFET Op Amp | Analog Devices

The Analog Devices LT1055S8 is a precision, high-speed JFET-input operational amplifier with one amplifier circuit in an 8-pin SOIC package. The device is specified for low offset voltage, low input bias current, high slew rate, and high gain-bandwidth product, making it suitable for instrumentation, buffering, signal conditioning, and low-level analog measurement systems. According to the Analog Devices product page, the LT1055/LT1056 family combines a typically 50 µV offset voltage, 1.2 µV/°C drift, 16 V/µs slew rate, and 6.5 MHz gain-bandwidth product, with guaranteed maximum offset voltage of 150 µV. An operational amplifier is an analog signal-processing integrated circuit that uses high-gain differential amplification and feedback to control gain, bandwidth, and output behavior. The LT1055S8 belongs to the JFET-input operational-amplifier family, a subcategory of precision amplifiers used when low input bias current and input capacitance are important. Its JFET input stage is appropriate for sensors, photodiodes, high-impedance transducers, and precision feedback networks where input bias current can create measurement errors. Key specifications include a guaranteed offset voltage of 150 µV maximum, guaranteed drift of 4 µV/°C maximum, and guaranteed bias-current limits of 150 pA at 70°C and 2.5 nA at 125°C. The LT1055 family is also specified for 16 V/µs slew rate and 6.5 MHz gain-bandwidth product in the manufacturer product information. The SOIC-8 format supports conventional surface-mount assembly and is compatible with standard op-amp layouts when pin functions and supply requirements are confirmed. Typical uses include precision instrumentation, low-level sensor interfaces, analog signal conditioning, active filters, sample-and-hold stages, and high-impedance buffer circuits. The device can also serve in test and measurement equipment where low offset and drift help preserve signal accuracy. Its high speed and low bias current provide useful flexibility when the signal source has high source impedance or when the application requires both DC precision and reasonable dynamic response. The principal design consideration is verifying the exact pinout, supply voltage, output swing, input common-mode range, and stability requirements against the manufacturer datasheet before layout. A precision op-amp does not remove the need for suitable decoupling, clean grounding, feedback-component selection, and output-load compatibility. This page combines the verified manufacturer and distributor information with practical guidance for evaluating the LT1055S8 against same-package alternatives.

見積もり お問い合わせ
LT1056CH - 16 V/us Precision JFET Op Amp | Analog Devices
LT1056CH

LT1056CH - 16 V/us Precision JFET Op Amp | Analog Devices

Analog Devices LT1056CH is a precision, high-speed JFET-input operational amplifier with 16 V/us slew rate, 6.5 MHz gain-bandwidth product, 150 uV maximum offset voltage, and typically 50 uV offset in an 8-pin TO-5 package. The device combines precision specifications with high-speed performance for instrumentation, signal conditioning, and low-distortion analog systems. A JFET-input operational amplifier is a voltage-amplifier integrated circuit whose field-effect input stage provides very low bias current. This LT1056CH family member is designed for applications requiring accurate DC offset behavior, low input bias current, wide bandwidth, and rapid large-signal response. Its position in the hierarchy is precision operational amplifier > general-purpose operational amplifier > analog signal-conditioning IC > semiconductor. Key features include a 16 V/us slew rate and 6.5 MHz gain-bandwidth product, allowing the amplifier to process signals with significant amplitude and bandwidth simultaneously. The typical input offset voltage is 50 uV, while the guaranteed maximum is 150 uV. Typical offset drift is 1.2 uV/degree C. Input bias current is typically 40 pA at 70 degrees C and 500 pA at 125 degrees C, making the device appropriate for high-impedance sensing stages. The LT1056 and LT1055 share the same JFET-input architecture, but designers should confirm offset, drift, bias-current, and package details for each ordering code. The verified manufacturer description specifically states that the LT1055/LT1056 combination combines precision specifications with 16 V/us slew rate and 6.5 MHz gain-bandwidth product. This performance is useful when slew-rate limiting, rather than small-signal bandwidth, would dominate amplifier behavior. Typical uses include precision instrumentation, low-level signal conditioning, active filters, data-acquisition front ends, and buffered sensor interfaces. The JFET input stage is especially useful where source impedance is high and the signal source cannot supply substantial bias current. The amplifier should be configured with suitable feedback, power-supply decoupling, and output-stage load consideration to retain low distortion and stable operation. Designers should account for input and output voltage headroom, verify the exact pin configuration and lead arrangement for the 8-pin TO-5 package, and inspect the manufacturer datasheet before layout release. The CH ordering code is associated with the commercial temperature grade and wire-lead TO-5 format. Do not assume that a modern surface-mount successor has the same footprint or pinout without an explicit manufacturer or distributor cross-reference. This page consolidates the verified manufacturer specifications, distributor identification, package details, pricing availability, and qualified drop-in information for the LT1056CH. It also distinguishes measured or guaranteed electrical characteristics from data that remains unavailable in the supplied sources, helping engineers make sourcing and design decisions without relying on unverified substitutions.

見積もり お問い合わせ
LT1057CH - Dual Precision JFET Op Amp | Analog Devices
LT1057CH

LT1057CH - Dual Precision JFET Op Amp | Analog Devices

The Analog Devices LT1057CH is a matched dual JFET-input precision operational amplifier in an 8-pin TO-5 package. It combines a 5 MHz gain-bandwidth product, a minimum slew rate of 10 V/us, and fast 0.02% settling performance for precision analog signal paths. The LT1057CH is designed for applications requiring low-noise JFET inputs, low offset voltage, high speed, and accurate behavior in feedback configurations. A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. The JFET input architecture supports very low input bias current and high input impedance, making it useful when measuring signals from high-impedance sources. Within the amplifier hierarchy, the LT1057CH belongs to the dual operational-amplifier category, combines precision and high-speed performance, and is ultimately an analog integrated circuit used for signal conditioning, feedback control, and signal amplification. Key features include a 5 MHz gain-bandwidth product, a guaranteed minimum slew rate of 10 V/us, and fast settling to 0.02%. The LT1057 offset-voltage specification is 150 uV maximum, while the associated LT1057 input bias current specification is 450 uV maximum as listed in the family datasheet. Its matched dual construction is intended to provide consistent performance between the two amplifier channels when both sections operate in similar circuits. The combination of precision offset and high bandwidth allows the LT1057CH to serve in instrumentation, buffer, and feedback-control circuits where either conventional bipolar input amplifiers or slower JFET amplifiers may limit system performance. The manufacturer identifies the device as an upgrade for systems using LF412A and OP-215 JFET-input dual amplifiers, while retaining the industry-standard 8-pin configuration. This makes it relevant to both new precision designs and carefully reviewed legacy upgrades. Typical applications include low-level signal conditioning, active filters, instrumentation amplifiers, sample-and-hold systems, and precision feedback loops. The dual format can also reduce board area by placing two matched amplifier sections in one package. In systems requiring differential drive or symmetrical signal paths, channel matching is valuable, although exact matching values should be taken from the manufacturer specifications for the selected grade. When designing around the LT1057CH, verify the complete pin configuration, supply limits, common-mode range, output swing, offset trim, and stability requirements against the manufacturer datasheet. Decoupling should be placed close to the supply pins, and feedback components should be arranged to minimize parasitic capacitance around the high-bandwidth amplifier inputs. This product page combines the official LT1057 family specifications with package-specific identification, drop-in replacement guidance, comparison criteria, and practical application notes. These engineering details help distinguish a true pin-compatible replacement from a merely similar precision amplifier and support faster component selection for high-impedance, precision, and feedback-sensitive circuits.

見積もり お問い合わせ
LT1057SW - Dual Precision JFET Op Amp | Analog Devices
LT1057SW

LT1057SW - Dual Precision JFET Op Amp | Analog Devices

Analog Devices LT1057SW is a dual, matched JFET-input precision operational amplifier in a 16-lead SOIC package. The device combines a minimum 5 MHz gain-bandwidth product with a minimum 10 V/µs slew rate, while the manufacturer identifies 13 V/µs as the typical LT1057SW slew rate. Its input architecture supports low-bias-current instrumentation and its precision characteristics target high-accuracy signal-conditioning applications where both speed and low offset are important. A JFET-input operational amplifier is an analog signal-conditioning IC that uses junction-field-effect-transistor input devices to provide very low input bias current. This places the LT1057SW in the amplifier hierarchy of JFET amplifier, operational amplifier, analog IC, and semiconductor. Unlike a bipolar-input amplifier, a JFET input stage can combine low bias current with high input impedance, making the device useful when measuring signals from high-impedance sources. According to the Analog Devices product page and LT1057/LT1058 datasheet, the LT1057 is a matched dual amplifier designed to replace popular bipolar and JFET-input dual op amps. The manufacturer specifically identifies upgrades for systems using the LF412A and OP-215. Clear electrical benefits include a 5 MHz minimum gain-bandwidth product, a 10 V/µs minimum slew rate, and a typical 13 V/µs slew rate in the LT1057SW ordering information. The dual configuration provides two amplifiers in one package, reducing board area compared with two separate single amplifiers. A reported common-mode rejection figure of 96 dB helps suppress differential input offsets and common-mode disturbances. The SW ordering option is associated with a 16-lead SO package and a specified 0°C to 70°C operating-temperature range; higher-temperature and packaging options should be confirmed by part suffix before substitution. Typical applications include precision signal conditioning, low-frequency instrumentation, active filtering, data acquisition, current-to-voltage conversion, and buffered sensor interfaces. The LT1057SW is particularly appropriate when a source presents high impedance and the input stage must minimize bias-current error while preserving useful slew rate and bandwidth. Layout should keep sensitive input nodes short, provide a solid ground reference, and place input and feedback components close to the relevant amplifier pins. Confirm the required supply voltage, output-swing limits, input-common-mode range, unity-gain stability, and exact lead assignments in the manufacturer datasheet before finalizing a new layout. This page organizes the manufacturer specifications, sourcing guidance, qualified drop-in analysis, application guidance, and design checks for engineers evaluating the LT1057SW. It also separates confirmed technical facts from parameters that require schematic-level verification, helping accelerate component selection without replacing careful datasheet review.

見積もり お問い合わせ
LT1058CJ - Quad 14V/us JFET Op Amp | Analog Devices
LT1058CJ

LT1058CJ - Quad 14V/us JFET Op Amp | Analog Devices

The Analog Devices LT1058CJ is a four-circuit precision high-speed operational amplifier with JFET inputs, a 14 V/us slew rate, a 5 MHz gain-bandwidth product, and a 14-pin CERDIP package. The LT1058CJ combines four independent amplifiers with low input bias current and precision offset characteristics, making it suitable for instrumentation, signal conditioning, and analog measurement systems. A JFET-input operational amplifier is a voltage-amplifier IC whose input stage uses junction field-effect transistors. This input architecture provides very low bias current, high input impedance, and effective operation with high-impedance sensors. Within the amplifier hierarchy, the LT1058CJ belongs to the precision operational-amplifier family and ultimately to the broader analog signal-processing and semiconductor categories. Key characteristics include 14 V/us minimum slew rate, 10 V/us minimum slew rate in one operating specification, a 5 MHz minimum gain-bandwidth product, and a fast settling specification of 0.02%. The LT1058 version has a maximum offset voltage of 600 uV. Input bias current is specified at 7 pA, supporting high-impedance sources whose leakage currents could otherwise create significant input-voltage errors. The four-amplifier configuration reduces the number of packages required for multi-channel analog systems. Four amplifiers in one 14-pin ceramic dual-inline package simplify board layout while supporting per-channel configuration as filters, buffers, gain stages, or instrumentation amplifiers. The precision JFET input stage makes the device especially useful where source impedance, bias-current error, and signal fidelity are more important than minimum cost or smallest area. Typical applications include low-level sensor signal conditioning, laboratory instrumentation, audio preamplification, active filtering, data-acquisition front ends, and precision current-voltage conversion. In a sensor interface, the amplifier can provide high input impedance without drawing significant current from the sensor. In an instrumentation chain, its low bias current helps preserve the integrity of small signals while its 14 V/us slew rate supports faster waveform transitions. Design with the input common-mode range, output swing, supply voltage, and stability requirements in mind. Ceramic decoupling should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended stable topology. The ceramic package provides a temperature grade suitable for demanding industrial and military applications, subject to the complete ordering information. This page combines the LT1058CJ’s principal electrical and packaging characteristics with application guidance, engineering notes, and cross-reference analysis. It focuses on design-relevant distinctions such as input bias current, slew rate, gain-bandwidth product, channel count, and the practical limitations of replacement packages.

見積もり お問い合わせ
LT1058CN - 4-Channel 5MHz JFET Op Amp | Analog Devices
LT1058CN

LT1058CN - 4-Channel 5MHz JFET Op Amp | Analog Devices

Analog Devices LT1058CN is a four-channel JFET-input precision operational amplifier with a 5 MHz gain-bandwidth product, 13 V/us slew rate, and 600 uV maximum offset voltage in a 14-pin PDIP package. The device is designed for precision signal processing applications that require low input bias current, high slew rate, fast settling, and multiple amplifiers on a single package. An operational amplifier is an analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. The LT1058 belongs to the precision operational-amplifier hierarchy and uses JFET input transistors to provide low input bias current. Four independent amplifiers in one PDIP package can reduce component count and simplify board layout in instrumentation, signal-conditioning, test, measurement, and control systems. The principal performance figures include a 5 MHz gain-bandwidth product, 13 V/us slew rate, and 600 uV maximum input offset voltage for the LT1058. Its four-channel organization supports parallel amplification of related or independent signals. The JFET input stage is particularly useful when the source impedance is high, because low input bias current reduces the voltage error generated as current flows through that impedance. The LT1058 is part of the LT1057/LT1058 family of dual and quad JFET-input precision high-speed operational amplifiers. The official family datasheet identifies a minimum 10 V/us slew rate and a minimum 5 MHz gain-bandwidth product for the family, while distributor data for the LT1058 identifies 13 V/us slew rate. The verified comparison data also identifies operation from negative 20 V to positive 20 V, a 1.7 mA listed supply current, and a 14-pin PDIP package. Typical uses include precision signal conditioning, laboratory measurement, analog instrumentation, process-control circuits, active filtering, and low-frequency data-acquisition channels. In high-impedance systems, the JFET inputs help preserve signal fidelity by minimizing bias-current-induced errors. For broadband or high-amplitude applications, the 13 V/us slew rate provides a useful speed margin, while the 5 MHz gain-bandwidth product limits closed-loop bandwidth according to the selected feedback topology and noise-gain setting. Designers should verify the complete input and output voltage ranges against the selected supply voltage, including the effects of input common-mode range, output swing, and load current. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's guidance rather than left with floating inputs. The broad 14-pin PDIP footprint is mechanically straightforward but occupies more board area than a modern surface-mount quad op amp. This page combines the verified LT1058 family specifications, distributor identification, package data, practical application guidance, and a conservative review of available drop-in alternatives. It distinguishes verified parameters from information that must be checked in the manufacturer datasheet before production release.

見積もり お問い合わせ
LT1079CN - Quad Micropower Precision Op Amp | Analog Devices
LT1079CN

LT1079CN - Quad Micropower Precision Op Amp | Analog Devices

The Analog Devices LT1079CN is a quad micropower precision operational amplifier optimized for single-supply operation at 5 V, with four amplifiers and four 14-pin PDIP devices per package. Its verified operating voltage range is 2.3 V to 12 V, gain-bandwidth product is 200 kHz, slew rate is 0.07 V/µs, and input bias current is 6 nA. The device is supplied in a 14-pin PDIP package for through-hole PCB designs. An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. A precision operational amplifier adds low offset, low bias current, and controlled gain behavior, while a micropower implementation limits supply consumption for battery-powered and low-power systems. Within the broader hierarchy, the LT1079 is a four-channel amplifier within the precision operational-amplifier and analog signal-conditioning IC categories. The LT1079's four independent amplifiers make it suitable for compact analog designs requiring several signal-conditioning stages. Its 200 kHz gain-bandwidth product supports low-frequency precision amplification, and its 0.07 V/µs slew rate provides a defined large-signal response. The low 6 nA input bias current reduces bias-current errors in high-impedance source interfaces, while single-supply operation simplifies circuits powered from a 5 V rail. The manufacturer describes the LT1079 as a micropower, single-supply precision amplifier suitable for precision filtering, instrumentation, and micropower sample-and-hold circuits. Because the verified product information identifies the operating voltage range as 2.3 V to 12 V, designers can use the device across common low-voltage supply systems. The quad configuration reduces the number of packages required when four gain stages, buffers, or active-filter sections are needed. Typical uses include low-power sensor interfaces, precision active filters, battery-powered measurement systems, audio and communication signal conditioning, and general-purpose 5 V analog circuits. In a sample-and-hold application, the amplifier can buffer the input and support the active input stage. In filters, its four channels can implement multiple buffered stages while maintaining a common supply architecture. Design with the 14-pin PDIP footprint and verify the complete pin assignment against the manufacturer datasheet before layout. Input common-mode range, output swing, offset voltage, supply current, noise, and stability recommendations are not included in the supplied verified excerpts, so they must be confirmed before committing a design to production. This page consolidates verified manufacturer and distributor information, package details, parameter constraints, and application guidance. It also distinguishes confirmed drop-in family options from parameters that still require datasheet verification, providing a practical starting point for sourcing and engineering evaluation.

見積もり お問い合わせ
LT1079MJ - Micropower Quad Op Amp | Analog Devices | Industrial
LT1079MJ

LT1079MJ - Micropower Quad Op Amp | Analog Devices | Industrial

Analog Devices LT1079MJ is a micropower, precision, quad operational amplifier optimized for single-supply operation at 5 V. It provides four amplifier circuits in a 14-pin CERDIP package, making it suitable for compact analog signal-conditioning systems that require multiple low-power amplifier channels. The device combines precision-oriented performance with a micropower design and single-supply capability. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain enables closed-loop functions such as signal amplification, buffering, summation, subtraction, filtering, and impedance conversion. The quad-amplifier form belongs to the operational-amplifier hierarchy within analog and linear integrated circuits, while the micropower and single-supply characteristics place it specifically in the low-power precision amplifier category. The LT1079MJ's four-circuit architecture reduces component count and board area compared with four separate dual or single amplifier packages. Its 5 V single-supply optimization supports systems in which the signal and output ranges are referenced to a positive supply rather than a split supply. This makes the device relevant to industrial instrumentation, low-voltage sensor interfaces, portable measurement equipment, and other compact analog circuits. Analog Devices describes the LT1079 as a micropower quad operational amplifier for single-supply, precision applications. The verified manufacturer information does not provide the complete electrical limits, offset and drift values, input-bias-current figures, noise-density figures, slew rate, gain-bandwidth product, output-current capability, or absolute maximum ratings, so those values should be confirmed in the manufacturer datasheet before final circuit sign-off. Typical uses include amplifying the outputs of low-level sensors, buffering precision converters, implementing active filters, conditioning strain-gauge or bridge signals, and providing multiple analog channels within battery-powered or space-constrained equipment. The quad configuration is particularly useful when several signals require similar amplification, buffering, or filtering functions. A primary design consideration is the interaction between power-supply voltage, input common-mode range, output swing, input bias current, and stability. Because the verified data establishes optimization for 5 V single-supply operation but does not publish the complete operating envelopes, engineers should verify signal amplitudes, load conditions, and external compensation requirements against the manufacturer datasheet before using the LT1079MJ at other supply voltages. This page consolidates the verified Analog Devices product information, distributor package identification, purchasing data, and practical selection considerations. It also documents the absence of verified drop-in substitutes and separates known device facts from parameters that require confirmation in the original manufacturer datasheet.

見積もり お問い合わせ
LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology
LT1080CJ

LT1080CJ - 5V RS232 Dual Driver/Receiver, 18-CERDIP | Linear Technology

The Linear Technology LT1080CJ is an advanced low-power 5V RS232 dual driver/receiver with shutdown, housed in an 18-pin CERDIP package. It operates on a single 5V supply and integrates two RS232 drivers and two RS232 receivers, plus a shutdown mode that reduces supply current and forces the driver outputs to a high-impedance state. According to the manufacturer datasheet, the part supports data rates above 120 kBaud, tolerates ±30V on driver outputs without damage, and requires only 1µF charge-pump capacitors. An RS232 transceiver is a type of line driver/receiver IC that converts TTL/CMOS logic levels (0V to 5V) to RS232 voltage levels (typically ±5V to ±15V) for serial data communication, or vice versa. RS232 transceivers sit hierarchically under interface ICs, then under integrated circuits, in the broader system taxonomy of communication and bus conversion components. They remain widely used in industrial serial ports, point-of-sale terminals, and legacy computer interfaces. Key features include superior CMOS drive capability versus older bipolar parts, three-state driver outputs that go high-impedance when shut down, ±30V overvoltage tolerance on driver outputs, and absolute latchup immunity under all conditions. The integrated charge pump uses small 1µF external capacitors, reducing board area compared to legacy RS232 designs that required 10µF or larger capacitors. The architecture uses an on-chip DC-DC charge pump to generate the ±10V RS232 supplies from a single 5V rail, eliminating the need for a negative supply. The shutdown pin puts the device in a low-current state with driver outputs tri-stated, allowing the part to share a serial bus with other drivers or to power down for energy-sensitive applications. Typical applications include industrial serial communication ports, point-of-sale (POS) terminals, legacy computer peripheral interfaces, embedded system debug consoles, and battery-powered handheld instruments that require a single-supply RS232 link. The shutdown feature is particularly useful in portable and battery-powered designs where quiescent current matters. When designing with the LT1080CJ, ensure the four charge-pump capacitors (typically 1µF) are placed as close to the IC pins as possible, and that the shutdown pin is properly driven (logic low for active, logic high for shutdown). Note that the CERDIP package is through-hole only - for surface-mount designs, the LT1080CN#PBF (PDIP-18) or LT1080CSW#PBF (SO-18) variants should be considered instead. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the LT1080CJ not found in the manufacturer datasheet alone, with cross-references to compatible 18-pin DIP-family RS232 transceivers.

見積もり お問い合わせ
LT1101CH - Precision Micropower Instrumentation Amplifier | Analog Devices
LT1101CH

LT1101CH - Precision Micropower Instrumentation Amplifier | Analog Devices

Analog Devices LT1101CH is a precision, micropower, single-supply instrumentation amplifier with fixed gain of 10 or 100, supplied in an 8-terminal round TO-5 package. The device is characterized for operation from a single 5 V supply, a single lithium cell, two Ni-Cad batteries, and dual ±15 V supplies. Its instrumentation-amplifier architecture combines differential input measurement with internally established fixed gain, reducing the need for external gain-setting components. An instrumentation amplifier is a specialized amplifier category optimized for measuring small differential signals while rejecting common-mode voltage. The LT1101CH belongs to the broader precision-amplifier hierarchy, combining low power consumption with fixed-gain operation. This makes it useful where a sensor output must be amplified and measured accurately without adding a separate precision gain stage. The LT1101CH provides fixed gains of 10 and 100, allowing designers to match amplification to the input-signal range. Its micropower operating characteristics are particularly valuable in portable instrumentation powered from a single 5 V supply or battery source. Operation from dual ±15 V supplies also supports higher-level laboratory and industrial signal chains. The manufacturer specifies the device for both single- and dual-supply conditions, enabling one amplifier family to cover different measurement environments. The LT1101 architecture is intended for differential signal conditioning, where common-mode rejection and stable closed-loop gain help preserve measurement accuracy. Fixed gain reduces external resistor-network sensitivity and simplifies calibration, although the LT1101CH does not offer the user-adjustable gain flexibility of general-purpose three-op-amp instrumentation amplifiers. Circuit design must therefore account for the fixed gain and the manufacturer’s recommended input, output, and supply-bypass connections. Typical applications include battery-powered sensor interfaces, biomedical instrumentation, industrial process measurement, portable test equipment, and low-level bridge or transducer signal amplification. A single-supply implementation is particularly suitable for compact instruments that cannot accommodate negative rails. The device can also serve in higher-voltage laboratory systems operated from ±15 V supplies when the common-mode and output ranges remain within the specified limits. When selecting a PCB footprint, verify the physical lead arrangement against the manufacturer’s TO-5 pin configuration because the 8-terminal package is not interchangeable with standard 3-lead TO-92 devices. Input shielding, short analog traces, stable reference or excitation connections, and local supply decoupling help preserve the benefit of a precision fixed-gain amplifier. The input common-mode range and output-swing limits must be checked against the actual sensor and supply voltages. This product page combines the manufacturer’s supply and gain information with practical guidance on signal conditioning, footprint selection, power architecture, and replacement sourcing. It also distinguishes the LT1101CH from other fixed-gain and adjustable-gain instrumentation amplifiers so engineers can choose a part that matches the required package, gain, supply voltage, and measurement precision.

見積もり お問い合わせ
LT1102CH - 10/100 Gain JFET Instrumentation Amp | Analog Devices
LT1102CH

LT1102CH - 10/100 Gain JFET Instrumentation Amp | Analog Devices

The Analog Devices LT1102CH is a high-speed, precision, JFET-input instrumentation amplifier with fixed gains of 10 or 100, 0.01% gain accuracy and 3 ppm non-linearity, packaged in an 8-lead hermetic TO-5 metal can. An instrumentation amplifier is a differential-input amplifier whose internal gain is set by internal resistor networks rather than by external feedback components. It belongs to the amplifier IC hierarchy, which sits above the general-purpose operational amplifier: while an op-amp needs external resistors, matched networks and careful layout to reject common-mode noise, an instrumentation amplifier integrates the differential pair, gain network and output stage so that high common-mode rejection is achieved with essentially no user gain-setting hardware. The LT1102 family extends that concept into the fast FET-input domain, delivering precision DC accuracy together with wideband dynamic performance in a low-cost, space-saving 8-pin package. Key features include a selectable fixed gain of 10 or 100, gain accuracy of 0.01%, non-linearity of 3 ppm, input offset voltage of 180 microvolts, and input bias plus offset currents below 10 pA. No external gain-setting resistor is required, which removes the resistor-tolerance and drift contribution that normally limits the accuracy of a discrete instrumentation front end. Slew rate, settling time, gain-bandwidth product and overdrive recovery time are all improved relative to competitive high-speed instrumentation amplifiers of the generation. The JFET input stage gives very low input bias current and high input impedance, which is essential when the source is a resistive bridge, a thermocouple, or a high-impedance transducer whose output would otherwise be loaded by the amplifier. Internal precision matching and laser trimming of the gain network are what deliver the 0.01% gain accuracy and 3 ppm non-linearity figures, and the fixed-gain architecture removes the need for a user-supplied external network that would degrade both figures. Typical applications include strain-gauge and load-cell bridge front ends, high-speed current shunt measurement, precision instrumentation for laboratory and test equipment, medical patient-monitoring signal chains, and industrial process-control sensor interfaces where fast settling after a large input step is required. When designing with the LT1102CH, verify that the supply rails stay within the ±9 V to ±20 V operating window and that the input common-mode range and output swing remain valid for the chosen gain. Because the gain is fixed internally, the system designer selects the 10 or 100 gain version at ordering time rather than trimming gain in-circuit; layout should keep the input traces short, guarded and away from switching nodes to preserve the benefit of the low-noise JFET input stage. This page brings together the manufacturer product information, the family-level precision and speed specifications, package and supply details, and engineering guidance on gain selection, layout and drop-in sourcing options that are spread across many separate documents.

見積もり お問い合わせ
LT1112S8 - Dual Picoamp Op Amp, 750kHz | Analog Devices
LT1112S8

LT1112S8 - Dual Picoamp Op Amp, 750kHz | Analog Devices

The Analog Devices LT1112S8 is a dual, low-power precision operational amplifier with picoamp input bias characteristics, a 750 kHz gain-bandwidth product, and an 8-pin SO package. Verified results identify a 60 µV maximum offset voltage for the prime grade, 0.5 µV/°C maximum offset drift, 250 pA maximum input bias current, 0.3 µVP-P 0.1-to-10 Hz noise, and 400 µA maximum supply current per amplifier. These values make the LT1112 family appropriate for precision current-to-voltage measurement, low-leakage sensor interfaces, instrumentation, and signal-conditioning circuits. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs while using negative feedback to establish closed-loop gain. The dual LT1112 contains two amplifiers in one package. In the broader semiconductor hierarchy, it is an operational amplifier, an analog amplifier IC, and a low-power precision signal-conditioning component designed for accurate signal conditioning rather than high-current power delivery. The verified LT1112 family emphasizes a combination of low cost and precision. Its low bias current reduces measurement error in high-impedance sources, while low input noise supports resolution-sensitive measurements. The 750 kHz gain-bandwidth product is sufficient for many low-frequency precision loops and modest signal-bandwidth requirements. Standard pinout, surface-mount availability, and the low-cost grade are specifically identified in the retrieved LT1112S8 information. The family description states that the LT1112 dual and LT1114 quad amplifiers combine low cost with outstanding precision specifications. The verified S8 package information and standard pinout support use in compact analog circuits. The specified offset voltage and drift are important when measuring small differential signals because input-referred offset can appear directly as measurement error, while drift changes that error with temperature. Typical uses include photodiode and other high-impedance sensor interfaces, precision current-to-voltage conversion, low-level signal amplification, instrumentation, and audio or analog test equipment. The low input bias current is especially useful when source leakage would otherwise disturb the measured node. The 750 kHz bandwidth should be checked against required signal bandwidth and closed-loop stability requirements. When laying out the circuit, use short input traces, clean grounding, and supply bypassing close to the device. Do not infer input common-mode, supply, or absolute maximum limits from the snippets; consult the manufacturer datasheet before final design release. The retrieved distributor result confirms the purchasable leaded, tape-and-reel ordering code LT1112S8#PBF, while the base MPN remains LT1112S8.

見積もり お問い合わせ
LT1114IN - 4-Channel Precision Op Amp | Analog Devices
LT1114IN

LT1114IN - 4-Channel Precision Op Amp | Analog Devices

Analog Devices LT1114IN is a four-channel, general-purpose precision operational amplifier designed for low-power signal conditioning and instrumentation applications. The device provides a 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, picoamp-class input bias characteristics, and an industrial-grade temperature range. It is packaged in a 14-pin DIP through-hole package. An operational amplifier is an active analog circuit element used to amplify voltage differences between its differential inputs. The LT1114IN belongs to the precision amplifier hierarchy: precision op amp, operational amplifier, analog signal-conditioning IC, and power-management semiconductor. Its four channels allow compact implementations of filtering, buffering, instrumentation, and active gain stages without requiring four separate single-channel packages. The key performance characteristics include a 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, 60 µV maximum offset voltage for prime grades, 0.5 µV/°C maximum input-bias drift, and low-power operation. These specifications make the LT1114IN suitable for transducers, sensor interfaces, analog measurement systems, and general-purpose signal paths where offset stability and low input current are important. The LT1114IN uses a bipolar precision operational-amplifier architecture. The 14-DIP (0.300 inch, 7.62 mm) package provides through-hole lead spacing for conventional PCB assembly, prototypes, and repair work. Because each amplifier has its own differential input and output pins, the package supports four independent analog channels while retaining a straightforward DIP footprint. Typical uses include low-frequency instrumentation, current-loop and voltage-signal conditioning, buffered sensor interfaces, active filters, sample-and-hold stages, and industrial control modules. The 750 kHz bandwidth is suitable for moderate-speed signal conditioning rather than high-frequency video or RF amplification. Designers should verify supply voltage, output swing, input common-mode range, noise, and stability requirements against the manufacturer datasheet for the exact grade. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer’s recommended practice rather than left floating. This product page combines the official Analog Devices product information, package and performance details, sourcing guidance, drop-in alternatives, and practical design notes. It helps engineers compare the LT1114IN with pin-compatible options while planning temperature-grade, package, and lifecycle requirements.

見積もり お問い合わせ
LT1114IS - 4-Channel 750kHz Precision Op Amp | Analog Devices
LT1114IS

LT1114IS - 4-Channel 750kHz Precision Op Amp | Analog Devices

Analog Devices LT1114IS is a four-channel precision operational amplifier with a 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, and picoamp-class input bias characteristics. The device is packaged in a narrow 16-pin SOIC and is intended for general-purpose precision signal conditioning where four amplifiers must fit on a compact PCB footprint. An operational amplifier, or op amp, is a differential voltage-controlled amplifier with high input impedance and open-loop gain. Its feedback network determines the completed function, allowing one device to perform inverting, non-inverting, summing, filtering, buffering, and gain-control operations. The LT1114 belongs to the operational amplifier hierarchy within analog ICs, combining four precision amplifier channels into one package for instrumentation, sensor, industrial-control, and low-frequency analog systems. The LT1114 family emphasizes low power, precision, and picoamp input bias current. Its 750 kHz gain-bandwidth product is suitable for moderate-frequency closed-loop amplification, while the 0.3 V/µs slew rate provides adequate response for common low-speed control and measurement signals. The prime-grade maximum offset voltage is 60 µV, supporting accurate DC operation when resistor matching and bias-current compensation are also managed carefully. The four amplifier channels share a common package but provide independent signal paths. This arrangement reduces component count and simplifies routing in designs requiring several matched functional stages, such as instrumentation amplifiers, active filters, motor-control loops, and sensor-conditioning circuits. The narrow SOIC-16 footprint is considerably smaller than a wide-body competitor package, helping conserve board area without requiring a specialized land pattern. Typical applications include low-level sensor amplification, current-loop measurement, buffer stages for analog-to-digital converters, active filtering, process-control signals, and general instrumentation. Because the gain-bandwidth product is 750 kHz, the device is best matched to low- and moderate-bandwidth signals rather than high-speed waveform, video, or RF chains. Design with the input common-mode range, output swing, supply voltage, noise, and stability requirements in mind. Place each decoupling capacitor close to its supply pins, avoid long high-impedance input traces where possible, and check the recommended feedback-network values in the manufacturer datasheet. The LT1114IS is supplied in tube packaging for the identified ordering configuration. This product record combines the manufacturer family description, ordering information, package details, and verified distributor metadata with practical guidance on amplifier selection, signal conditioning, and drop-in replacement evaluation.

見積もり お問い合わせ
LT1114S - Quad Low Power Precision Op Amp | Analog Devices
LT1114S

LT1114S - Quad Low Power Precision Op Amp | Analog Devices

The Analog Devices LT1114S is a quad low-power precision operational amplifier that combines picoampere-level input bias current with low offset voltage in a 16-pin SOIC package. The device delivers a 750 kHz gain-bandwidth product and a 0.27 V/µs slew rate while drawing minimal quiescent current per amplifier, suiting it to battery-powered precision signal chains. A precision op amp is a linear integrated circuit that amplifies low-level analog signals with high accuracy, characterized by low input offset voltage, low input bias current, low noise, and high open-loop gain. The LT1114S belongs to the operational amplifier family within the amplifier IC hierarchy, which falls under the broader category of analog signal conditioning ICs in mixed-signal semiconductor design. Quad packages integrate four independent op amps for channel-dense applications such as multi-sensor signal conditioning, instrumentation front-ends, and active filter banks. The LT1114S achieves 60 µV maximum offset voltage on the prime grade and 75 µV on the low-cost grade, with picoampere input bias current and low supply current per amplifier. It operates from ±1 V to ±20 V supplies, has a 750 kHz gain-bandwidth product, and 0.27 V/µs slew rate. The device includes industry-standard pinout in the SOIC-16 (S16) package, enabling direct drop-in upgrades of legacy quad precision op amps such as the OP-400, OP-497, and AD704. The LT1114S uses a bipolar input stage with bias-current cancellation that delivers picoampere input bias current without the noise penalty of CMOS JFET inputs. Its trimmed input stage and on-chip temperature compensation keep offset voltage low across the -40 °C to +85 °C industrial temperature range, supporting precision measurement systems that must hold calibration over thermal cycling. Typical applications include precision instrumentation amplifiers, strain-gauge and thermocouple signal conditioning, multi-channel data-acquisition front-ends, medical instrumentation, and active analog filters. The wide supply range also supports ±15 V industrial systems. When designing with the LT1114S, choose the prime grade when offset voltage and drift directly impact system accuracy; choose the low-cost grade when budget dominates and 75 µV offset is acceptable. The LT1114S is pin-compatible with the OP-400, OP-497, and AD704 quads, allowing board-level upgrades with no PCB rework. This page synthesizes distributor pricing, drop-in upgrade alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the LT1114S for precision analog designs.

見積もり お問い合わせ
LT111A - 250ns Voltage Comparator | Analog Devices
LT111A

LT111A - 250ns Voltage Comparator | Analog Devices

The Analog Devices LT111A is a general-purpose voltage comparator with 1.0 mV maximum input offset voltage, 5.0 nA maximum input offset current, and a maximum response time of 250 ns. It operates from a single 5 V supply through ±15 V supplies and is available in the verified TO-5 package. A voltage comparator is an integrated circuit that determines whether an input voltage is above or below a reference level, producing a logic output suitable for control, monitoring, or switching decisions. The LT111A belongs to the comparator family within analog integrated circuits and power-management control systems. Unlike an operational amplifier intended primarily for linear amplification, the comparator is optimized for fast, saturated output transitions and threshold decisions. The LT111A improves on the LM111 general-purpose comparator according to the manufacturer datasheet. Its headline specifications include 1.0 mV maximum input offset voltage, 5.0 nA maximum input offset current, and 250 ns maximum response time. The input stage accepts differential input signals up to ±30 V, while the output can drive loads up to 50 mA referenced to ground or either supply, as stated in the datasheet search data. The component includes offset balancing and strobe capability. A separate output ground pin allows the output reference to be selected independently of the circuit ground, which is useful when interfacing to systems with different output-return requirements. The output can also be combined for OR-style logic, although exact implementation depends on the surrounding circuit and output configuration. Typical uses include precision threshold detection, sensor signal conditioning, window comparison, overvoltage indication, zero-crossing detection, and industrial control systems. The 250 ns response is suitable for systems that need faster decisions than general-purpose slow comparators while retaining wide input-voltage capability. Designers must account for the obsolete lifecycle status, supply arrangement, input common-mode limits, output polarity, and thermal constraints. The verified manufacturer result identifies LT111A as obsolete and directs users to contact Analog Devices for a replacement product. New designs should therefore confirm availability, lifecycle status, and any recommended replacement before committing to production. This page consolidates the verified manufacturer specifications, obsolete-status notice, package information, design guidance, and sourcing limitations for engineers comparing the LT111A with legacy comparator systems.

見積もり お問い合わせ
LT111AH Military Voltage Comparator | Analog Devices
LT111AH

LT111AH Military Voltage Comparator | Analog Devices

The Analog Devices LT111AH is a military-grade, single voltage comparator supplied in an 8-terminal round TO-5 package. It compares one input voltage level with another and provides a logic-level output suitable for threshold, window, zero-crossing, and sensing functions. The verified product data identifies it as an IC voltage comparator, specifies an 8-wire terminal configuration, and states a maximum operating temperature of 125°C. Exact input common-mode limits, output-current capability, propagation delay, and offset parameters are not present in the supplied records. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output when the difference crosses a defined threshold. Within the broader semiconductor hierarchy, a comparator belongs to the linear IC family and the amplifier IC category. Unlike a general-purpose operational amplifier, its principal purpose is fast, deliberate state transition according to the polarity of its differential input rather than linear amplification. The LT111AH is associated with the LT111 comparator family and is offered in a military temperature grade. The H suffix distinguishes this ordering code from other package, temperature, or accuracy variants, but the supplied excerpts do not expose the underlying ordering-code table needed to state every suffix characteristic. Its TO-5 construction uses wire-form leads and suits legacy or ruggedized assemblies where a through-hole metal package is preferred. The round package also requires care during insertion because lead orientation determines correct comparison-input and output connections. Verified distributor records classify the part as a comparator and show commercial listings through DigiKey, Octopart, Xecor, and other suppliers. The available Cytech Systems result reports zero stock and $0.0000 reference prices, so those values cannot be interpreted as a usable quotation. The Linear Technology page indexed by linear-electronic.com reports 3,320 pieces in stock, but that vendor record is not treated as an authoritative global stock figure. Pricing and availability should therefore be confirmed at order time. The LT111AH can be evaluated for industrial control, instrumentation, alarm detection, and legacy equipment, provided the system supply stays within the family limits. External resistors and protection networks may be needed to constrain inputs or accelerate an open-collector output, but exact values cannot be selected responsibly without verified input thresholds, output architecture, supply range, and timing specifications. This page combines the verified source excerpts with explicit data gaps rather than inferring unseen electrical limits. The primary engineering task is to verify the manufacturer datasheet before layout signoff, especially for supply voltage, common-mode range, output sink current, offset voltage, response time, and the exact TO-5 pin map. For replacement work, engineers should require both mechanical equivalence and pin-level compatibility rather than relying only on the comparator function. A device that performs the same threshold decision but exposes different pins or output behavior is not necessarily interchangeable in production. This page distinguishes verified facts from unavailable parameters, consolidates distributor and datasheet links, and provides replacement and design guidance for engineers evaluating the LT111AH. Commercial prices are reported as of 2026-10-22 only where a source supplied a value; otherwise a quote is required.

見積もり お問い合わせ
LT1125CJ - Quad Precision Op Amp | Analog Devices | Instrumentation
LT1125CJ

LT1125CJ - Quad Precision Op Amp | Analog Devices | Instrumentation

The Analog Devices LT1125CJ is a quad low-noise, high-speed precision operational amplifier packaged in a 14-pin CERDIP. The device provides four amplifier channels in one through-hole package, making it useful when a circuit requires multiple precision signal-conditioning stages without allocating separate packages for each channel. The LT1125 family is positioned for instrumentation and other applications where low-noise, high-speed amplification and higher gain performance are important. An operational amplifier, commonly called an op amp, is an active semiconductor component that uses high gain and negative feedback to amplify small voltage differences. It belongs to the amplifier IC hierarchy, where precision operational amplifiers are selected when signal fidelity, offset behavior, bias-current characteristics, and open-loop performance matter more than the lowest possible cost or smallest footprint. The LT1125 uses a four-channel architecture, with the “quad” configuration providing four amplifier sections in one package. Its operating class is described by Analog Devices as low noise, high speed, and precision. These characteristics make it suitable for low-level sensor conditioning, instrumentation amplification stages, and analog signal chains in which multiple channels must be handled consistently. The C suffix identifies the commercial temperature-grade family, while the J suffix denotes the through-hole ceramic dual-inline package used by LT1125CJ. The manufacturer describes the LT1125 as offering higher gain, slew rate, and bandwidth than the industry-standard OP-27 and competing OP-470 families. These comparisons are relevant when upgrading an existing precision-amplifier design, but the actual signal bandwidth, noise density, input offset voltage, input bias current, input voltage range, and output swing must be checked against the system requirements before replacing another amplifier. Typical uses include four-channel instrumentation front ends, low-level transducer signal conditioning, precision measurement systems, laboratory interfaces, and factory test equipment. The LT1125CJ is particularly appropriate when a through-hole ceramic package is preferred, four amplifier channels are required, and the design benefits from the family’s stated low-noise, high-speed, and precision characteristics. It can also simplify assembly by reducing the number of amplifier packages on a board. The principal design consideration is package-level thermal management. A 14-pin CERDIP offers a larger thermal path and more forgiving assembly characteristics than a small surface-mount package, but it consumes substantially more board area. Confirm pin orientation, supply requirements, input common-mode range, output swing, stability requirements, and decoupling directly from the manufacturer datasheet before laying out the PCB. This product record combines the exact ordering information, package details, family positioning, manufacturer product information, and replacement-search results into an engineering-oriented reference. It also highlights where a genuinely pin-compatible replacement must be qualified rather than assuming that a similar amplifier has the same pinout, supply behavior, or precision performance.

見積もり お問い合わせ
LT1127CJ - Quad High-Speed Precision Op Amp | Analog Devices
LT1127CJ

LT1127CJ - Quad High-Speed Precision Op Amp | Analog Devices

Analog Devices LT1127CJ is a quad, decompensated, low-noise, high-speed precision operational amplifier packaged in a 14-pin CERDIP. The device contains four amplifiers and is stable at a closed-loop gain of 10 or higher. Its decompensated architecture provides higher slew rate and bandwidth than the LT1124 dual and LT1125 quad operational amplifiers while preserving the DC specifications of those devices. The LT1127 therefore occupies the linear-regulator-to-precision-signal-chain role where multiple channels must amplify small signals without being operated as unity-gain amplifiers. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification and negative feedback to control gain, bandwidth, output impedance, and signal integrity. A precision operational amplifier adds low offset, low bias-current, and noise-related performance for instrumentation, measurement, active filtering, and signal-conditioning systems. The LT1127 is specifically a decompensated amplifier: its compensation supports stable operation at higher closed-loop gain rather than the unity-gain stability expected from conventional voltage-feedback amplifiers. The LT1127 family provides four amplifiers in one package, reducing component count and board area when several precision channels are required. Its defining performance advantage is the combination of increased AC performance with unchanged DC characteristics relative to the LT1124 and LT1125 families. The manufacturer describes the LT1126/LT1127 as high-performance, low-noise, high-speed precision op amps with stability at a gain of 10 or more. This makes the family applicable to instrumentation amplifiers, active filters, low-level sensor interfaces, and analog control loops whose architecture already provides adequate loop gain at a closed-loop gain of 10. The LT1127CJ is the 14-pin CERDIP orderable designation within the LT1127 family. A ceramic dual in-line package provides a through-hole mechanical format for industrial and legacy-style equipment, while the quad channel count supports four independent amplifier sections. Applications include four-channel sensor conditioning, multi-channel active filtering, buffered instrumentation inputs, precision signal amplification, and industrial measurement systems. The decompensated architecture makes gain planning essential: feedback networks should be designed around a minimum stable closed-loop gain of 10. Designers should account for the package's thermal environment, input and output signal limits, supply voltage, and the feedback network when using the LT1127CJ. Because the device is decompensated, using it as a unity-gain buffer is not the intended operating mode. Confirming offset, bias-current, noise, slew-rate, bandwidth, supply-current, and temperature limits in the manufacturer datasheet is necessary before fixing the production design. This product page organizes the exact LT1127CJ identity, package information, manufacturer documentation, engineering use cases, and sourcing path in one place. It also highlights the principal selection constraint—stable operation at a gain of 10 or higher—so engineers can distinguish this decompensated precision amplifier from conventional unity-gain-stable op amps before beginning PCB or schematic work.

見積もり お問い合わせ
LT1132CN - Low-Power RS-232 Transceiver | Analog Devices
LT1132CN

LT1132CN - Low-Power RS-232 Transceiver | Analog Devices

The Analog Devices LT1132CN is a low-power RS-232 line transceiver with integrated drivers and receivers in a 24-pin through-hole DIP package. The verified source data identifies it as a commercial-temperature line transceiver with 24 terminals, a rectangular DIP package, and through-hole mounting. It is designed for systems that need bidirectional serial data transmission over RS-232 links, including computer serial ports, industrial control links, data-acquisition equipment, and embedded control systems. An RS-232 transceiver is an interface IC that converts between digital logic-level signals and RS-232 line-level voltages. The LT1132CN combines transmitter and receiver functions in one package, reducing the number of interface components required in a serial port. In the broader electronics hierarchy, it belongs to interface ICs, line drivers and receivers, communication transceivers, and RS-232 interface devices. Its commercial-grade classification makes it relevant to equipment operating in ordinary commercial environments, although detailed temperature limits were not present in the supplied data. The verified listing identifies the LT1132CN as a LINE TRANSCEIVER and supplies the package basics: 24 terminals, DIP package code, rectangular package shape, and through-hole terminal form. The supplied search results also associate the LT1132 family with low-power 5 V RS-232 drivers and receivers, but exact voltage, current, propagation-delay, driver-strength, receiver-threshold, and logic-level values are not provided. Those parameters should be confirmed in the manufacturer datasheet before final circuit design. The transceiver can be used to connect a host controller to an RS-232 data link, especially where a compact, multi-function interface is preferred over separate driver and receiver ICs. Because this is a through-hole DIP device, it is well suited to through-hole prototypes, legacy equipment, repair applications, and industrial controller boards where a large package and socketed assembly are acceptable. The DIP outline also simplifies inspection and replacement, but it requires more board area than a surface-mount equivalent. A key design consideration is that RS-232 uses voltage levels and signal polarity that are not directly compatible with ordinary CMOS or TTL logic. The transceiver handles that conversion, but the system still needs correct decoupling, grounding, connector protection, cable-length planning, and appropriate handling of unused enable or control pins. Because the supplied data does not specify exact pin names or all electrical limits, the LT1132CN pinout should be taken from the official datasheet rather than inferred from the package outline. This page consolidates the verified distributor and manufacturer-related links for the LT1132CN, identifies the confirmed commercial DIP package information, and separates verified facts from parameters that still require datasheet confirmation. It also records the absence of verified pricing, lifecycle, compliance, pin-level, and direct drop-in replacement data to avoid presenting unsupported engineering assumptions.

見積もり お問い合わせ
LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices
LT1167IS8

LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices

The Analog Devices LT1167IS8 is a low-power, precision instrumentation amplifier (InAmp) that requires only one external resistor to set any gain from 1 to 10,000, housed in an 8-pin SOIC package. Key specifications include 7.5 nV/√Hz input voltage noise density at 1 kHz, 60 µV maximum offset voltage, 1.2 V/µs slew rate, 1 MHz gain-bandwidth product, and 0.9 mA typical supply current on ±2.3V to ±18V supplies. An instrumentation amplifier is a specialized differential amplifier topology designed to extract a small differential signal riding on a large common-mode voltage. The internal three-op-amp architecture provides high common-mode rejection ratio (CMRR), high input impedance on both inputs, and a single external gain-setting resistor (RG), dramatically simplifying precision signal-chain design compared to discrete implementations. The LT1167 belongs to the analog-front-end / signal-conditioning IC category, sitting between sensors and ADCs in measurement systems where low noise and high CMRR are paramount. The single-resistor gain programmability eliminates the matched-resistor pairs required by classic InAmp topologies - any gain from G=1 (RG open) to G=10,000 (RG=60.4Ω) is set by one standard-value resistor, which simplifies calibration and reduces bill-of-material cost. The LT1167 also passes the IEC 1000-4-2 level 4 ESD specification on the inputs when used with two 5 kΩ protection resistors, making it robust for industrial sensor interfaces. Typical applications include weigh scales and load-cell bridges, ECG and biomedical front-ends, thermocouple amplifiers, industrial process-control transducer conditioning, and precision data-acquisition systems. The wide ±2.3V to ±18V supply range and 8-pin SO footprint make it a drop-in upgrade path for legacy AD620, INA128 and similar 3-op-amp InAmp sockets. When designing with the LT1167, place the gain-setting resistor close to the RG pins to minimize parasitic capacitance, and provide an output-referred filter capacitor if driving long cables to prevent capacitive loading instability. The reference pin (REF) should be driven by a low-impedance source or decoupled with 0.1 µF to ground for optimal CMRR. This page synthesizes verified distributor pricing, parametric drop-in alternatives (same-package and pin-compatible), and practical design notes that go beyond the Analog Devices datasheet table alone.

見積もり お問い合わせ
LT1179CJ - 17uA Quad Precision Op Amp | Analog Devices
LT1179CJ

LT1179CJ - 17uA Quad Precision Op Amp | Analog Devices

Analog Devices LT1179CJ is a micropower quad precision operational amplifier supplied in a 14-pin CERDIP package. The device is optimized for single-supply operation at 5V and is also specified at ±15V supplies. Each amplifier features a maximum supply current of 17uA, maximum offset voltage of 70uV, maximum offset current of 250pA, and maximum input bias current of 5nA. A precision operational amplifier is a low-noise, high-gain analog signal-conditioning device used to amplify weak sensor, instrumentation, control, and feedback signals. The LT1179CJ belongs to the micropower operational-amplifier category, combining four amplifiers in one package with very low supply-current demand. This makes it suitable for battery-powered instrumentation and other systems where amplifier power consumption must remain small. The LT1179CJ is specified as a general-purpose, four-circuit amplifier. Its precision characteristics include low offset voltage, low offset current, and low input bias current, helping reduce signal error when the amplifier is used with sensors, transducers, or high-impedance sources. The device is intended for single-supply systems, where the output signal must be biased above ground, as well as conventional dual-supply circuits using ±15V. The LT1179CJ can be used in low-power sensor interfaces, precision signal-conditioning circuits, instrumentation amplifiers, data-acquisition front ends, battery-powered measurement systems, and low-current feedback loops. Its 17uA-per-amplifier maximum supply current is particularly useful when four active amplifiers would otherwise contribute a larger aggregate supply-current requirement. For single-supply operation, confirm the input and output common-mode range, output swing, and load requirements against the manufacturer datasheet before finalizing the biasing network. Decoupling capacitors should be placed close to the power pins, and unused amplifier channels should be configured according to the recommended stable-output method. This product page combines the manufacturer product information, distributor package identification, and application-oriented engineering guidance. Use the official Analog Devices datasheet for the complete electrical characteristics, pin assignments, ordering information, and test conditions.

見積もり お問い合わせ
LT1206CR - 250mA, 60MHz Current Feedback Amplifier | Analog Devices
LT1206CR

LT1206CR - 250mA, 60MHz Current Feedback Amplifier | Analog Devices

Analog Devices LT1206CR is a single current-feedback operational amplifier with 250mA minimum output drive current and 60MHz bandwidth in a 7-lead DDPAK package. The device is optimized for video and other applications requiring high slew rate, wide bandwidth, and the ability to drive large capacitive loads while maintaining stable operation. Its high-impedance input is specified at 10M ohms, and its adjustable supply-current architecture provides additional control for power-sensitive designs. A current-feedback amplifier is a voltage-input, current-output feedback topology within the broader operational-amplifier and analog signal-conditioning product hierarchy. Unlike a conventional voltage-feedback amplifier, the LT1206CR controls a differential current rather than an error-voltage gain, enabling wide bandwidth and high slew-rate performance while preserving low distortion. It is positioned as an analog amplifier IC for video, communications, and signal-chain systems that need more output drive than a general-purpose op amp provides. Verified manufacturer information identifies 250mA minimum output drive, 60MHz bandwidth, a 900V/us maximum slew-rate value, 0.02% differential-gain error, and 0.17 degrees differential phase. The device operates across a wide supply range and accepts supplies up to ±15V. A shutdown function places the amplifier in a high-impedance, low-current mode, with shutdown current below 200uA, helping reduce dissipation when the circuit is inactive. The LT1206 is particularly suitable for video because it combines high bandwidth, high output current, and excellent video characteristics. It is also stable with large capacitive loads and can supply the current required by capacitive input and output networks. The adjustable supply-current feature allows engineers to balance performance and power consumption according to the source impedance, load, and operating conditions of a specific board. Typical uses include video buffering, cable-driver interfaces, active video filters, video distribution, communications equipment, and test and measurement systems. In these applications, the 60MHz bandwidth and 250mA output-current capability provide useful margin for signal transmission and load driving, while the shutdown feature supports systems that periodically disable the amplifier. When laying out the circuit, use short feedback paths, maintain the feedback network close to the amplifier, and account for the DDPAK-7 thermal-pad connection when calculating copper heat spreading. Because the exact pin names and exposed-tab assignment are not present in the supplied verified snippets, the package drawing is not populated rather than presenting an unverified pinout. Consult the official LT1206 datasheet before PCB release or substitution. This page consolidates the verified Analog Devices product information, distributor availability references, package details, and practical selection guidance for the LT1206CR. It also distinguishes device-level evidence from unresolved replacement and pricing data, helping engineers avoid treating generic op-amp alternatives as true pin-compatible drop-ins.

見積もり お問い合わせ