集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MC9S08AC60MPUE - 40MHz 60KB Flash 8-Bit MCU | NXP
MC9S08AC60MPUE

MC9S08AC60MPUE - 40MHz 60KB Flash 8-Bit MCU | NXP

The NXP Semiconductors MC9S08AC60MPUE is an 8-bit S08AC-series microcontroller with a 40 MHz HCS08 CPU, 60 KB flash memory, and a 64-LQFP 10 x 10 mm package. It also provides 2 KB RAM and integrated ADC, SCI, SPI, and I2C interfaces for automotive and industrial control applications. A microcontroller is a programmable embedded-control component that combines a CPU, nonvolatile program memory, working memory, and peripherals in one integrated circuit. In the semiconductor hierarchy, this device is an MCU, a microcontroller, and an embedded processor designed to execute firmware, acquire analog data, exchange serial data, and control external hardware. The verified source data highlights a 40 MHz clock, 60 KB flash, 2 KB RAM, and an operating supply range of 2.7 V to 5.5 V. The peripheral mix supports embedded designs that require more I/O than a basic 8-bit control device while retaining the straightforward architecture of the HCS08 family. The source listings identify 38 I/O ports, while another distributor listing reports 54 I/O ports; this discrepancy requires checking the exact device pin definitions in the manufacturer datasheet before final PCB sign-off. The 64-LQFP package exposes a substantial pin count for power, ground, I/O, programming, and communication functions. Its automotive-oriented ordering information is visible in distributor records, but the provided source set does not independently confirm a complete AEC-Q100 qualification statement. Designers should verify temperature limits, pin multiplexing, clock configuration, and electrical constraints in the manufacturer datasheet. Typical uses include industrial control modules, automotive body or accessory controllers, sensor-interface nodes, motor-control peripherals, communications bridges, and compact embedded products using ADC and serial interfaces. The S08 architecture is particularly relevant where deterministic control, low component count, and established 8-bit tooling are preferred. For a new design, preserve the exact 64-LQFP footprint, verify unused-pin termination, provide the required decoupling and programming connections, and validate the firmware image, clock setup, and peripheral pin multiplexing. This page combines verified distributor data with explicit engineering caveats where the supplied sources do not provide complete technical values.

見積もり お問い合わせ
MC9S08AC8CFDE - 8-bit 40MHz 8KB MCU | NXP | Industrial Control
MC9S08AC8CFDE

MC9S08AC8CFDE - 8-bit 40MHz 8KB MCU | NXP | Industrial Control

The NXP Semiconductors MC9S08AC8CFDE is an 8-bit HCS08 microcontroller with an S08 core, 8KB flash memory, a 40MHz maximum clock, 10-bit ADC capability, SCI and SPI interfaces, and a 48-QFN exposed-pad package measuring 7 x 7 mm. It is positioned for automotive and industrial control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output interfaces onto one device. The S08 belongs to the HCS08 8-bit MCU family and is designed for compact embedded control systems. This device combines general-purpose control processing with analog measurement and serial communication, allowing one package to supervise sensors, actuators, and communication links. The verified product information identifies 8KB of flash, an 8-bit architecture, a 40MHz rating, 10-bit ADC capability, SCI and SCI interfaces, and a 48-QFN-EP package. These features make the MC9S08AC8CFDE relevant to low-cost control platforms requiring embedded firmware, peripheral connectivity, and analog signal acquisition. The exact RAM size, supply range, pin functions, and detailed electrical limits were not supplied in the retrieved data and require verification from the manufacturer datasheet before design release. The S08 core provides an 8-bit processing platform for embedded state machines, monitoring, and control loops. Its 40MHz maximum frequency provides a timing headroom advantage over slower 8-bit devices, while 8KB flash constrains firmware size and may require optimized code organization. SCI and SPI interfaces support serial peripherals and external devices without relying on software bit-banging. The 10-bit ADC feature is suitable for basic analog sensing, although resolution, sampling characteristics, and reference limits are not available in the provided search excerpts. Typical uses include automotive body-control modules, industrial sensors, compact motor-control products, data acquisition, and low-cost embedded systems. The exposed-pad QFN format requires careful PCB footprint and thermal design work. Because the manufacturer marks the part as End of Life, long-life programs should confirm approved sourcing, last-time-buy opportunities, or an officially documented replacement before committing new production volumes. The principal design consideration is lifecycle planning rather than feature substitution. Existing boards may still be serviceable when original stock or qualified inventory is available, but new designs should not assume broad future availability. Validate the complete pinout, electrical limits, firmware compatibility, and package land pattern against the official NXP documentation before schematic capture or PCB release. This page consolidates the verified manufacturer and distributor descriptions, lifecycle information, interface capabilities, sourcing links, and engineering-oriented caveats for MC9S08AC8CFDE. It is intended to help engineers identify the correct device and plan a controlled end-of-life transition without relying on unverified substitute parts.

見積もり お問い合わせ
MC9S08AC8CFGE - 40MHz 8-bit MCU with 8KB Flash | NXP
MC9S08AC8CFGE

MC9S08AC8CFGE - 40MHz 8-bit MCU with 8KB Flash | NXP

The NXP Semiconductors MC9S08AC8CFGE is an 8-bit HCS08 microcontroller with a 40 MHz maximum clock, 8 KB of Flash memory, 4 KB of RAM, and a 44-LQFP 10 x 10 mm package. The device is designed for cost-sensitive embedded controls that require serial connectivity, general-purpose I/O, and an ADC. According to the verified distributor records, it belongs to the S08AC family and provides 4-channel ADC and serial interfaces. An 8-bit microcontroller is a compact embedded-processing semiconductor that executes firmware from nonvolatile Flash memory while using general-purpose I/O to monitor inputs and operate external devices. The HCS08 S08AC core combines a simple 8-bit architecture with a high peripheral integration level, placing the MCU in the broader hierarchy of embedded controller, semiconductor, and industrial-control electronics. This makes the MC9S08AC8CFGE suitable for appliances, instrumentation, access controls, and small automation systems. Verified features include a 40 MHz clock, 8 KB of 8K x 8 Flash, and 4 KB of RAM. Its 44-LQFP package provides 34 I/O ports according to one verified product listing, while another secondary record reports 38 I/O ports; this discrepancy must be resolved against the manufacturer datasheet before a new PCB is released. A 4-channel ADC supports analog measurement, and the listed serial interfaces allow communication with sensors, displays, actuators, and external controllers. The S08 architecture emphasizes economical embedded control rather than high compute throughput. Firmware execution, memory use, clock settings, peripheral configuration, and pin multiplexing must be checked against the manufacturer data sheet for the exact suffix and temperature grade. Because NXP marks the product as end of life, production planning should account for limited future supply and formal lifecycle review before committing to long-running designs. Typical uses include compact motor and relay controllers, analog sensor acquisition, keypads, serial bridges, lighting controls, industrial interface modules, and cost-sensitive consumer equipment. The 44-LQFP package is easy to prototype with accessible leads, but its relatively large footprint requires more board area than a modern fine-pitch package. Existing S08 software and toolchain investment can make replacement planning more important than simply adopting a newer MCU architecture. A robust design should verify all supply rails, oscillator connections, reset behavior, exposed programming pins, and ADC reference requirements before layout. Preserve the supported programming interface and include recovery access in the board test plan. For an EOL redesign, treat firmware compatibility, tooling availability, and last-time-buy timing as primary engineering constraints alongside electrical equivalence. This page consolidates verified distributor and manufacturer information with practical replacement and design guidance. It does not invent unavailable electrical limits, pin assignments, prices, or cross references, and clearly identifies missing data where the supplied records conflict or remain incomplete.

見積もり お問い合わせ
MC9S08AC8CFJE - 8KB Flash S08 8-bit MCU, 40MHz, 32-LQFP | NXP
MC9S08AC8CFJE

MC9S08AC8CFJE - 8KB Flash S08 8-bit MCU, 40MHz, 32-LQFP | NXP

The NXP MC9S08AC8CFJE is an 8-bit HCS08 microcontroller from the S08AC family featuring a 40 MHz S08 core, 8 KB of Flash program memory, 4 KB of RAM, integrated peripherals, and a 32-pin LQFP (7x7 mm) package. Designed for cost-sensitive embedded applications, it provides a balance of low power consumption, robust peripheral integration, and broad I/O connectivity for industrial and consumer products. NXP's S08AC family is described as the third-generation pin-compatible pair within the FlexIS series, supporting both 8-bit and 32-bit footprints. The MC9S08AC8CFJE variant is the 8-bit entry in that pairing, prioritizing small code footprint, deterministic interrupt handling, and ease of migration between S08AC family members. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), volatile data memory (RAM), and a variety of analog and digital peripherals onto one silicon die. Within the embedded hierarchy, the MC9S08AC8CFJE belongs to the 8-bit microcontroller category, which sits below 16-/32-bit families in raw computing power but offers lower cost, simpler toolchains, and ultra-low active and standby power for high-volume applications. The HCS08 core executes most instructions in 1-2 clock cycles, providing an effective 40 MIPS throughput at 40 MHz bus speed. Key features of the MC9S08AC8CFJE include 25 General-Purpose I/O (GPIO) pins with interrupt capability, an integrated 10-bit Analog-to-Digital Converter (ADC) with up to 8 channels, multiple serial interfaces including SCI (UART) and SPI, a timer/PWM module (TPM) for motor and lighting control, and an internal clock generator with a trimming capability. The device supports a wide operating voltage range suitable for 3.3V and 5V systems, includes a low-power Run, Wait, and Stop mode set, and provides on-chip in-circuit debug (BDC) and Flash programming support for low-cost development. Note that the NXP product page also mentions integrated USB, which is more characteristic of other S08AC family members - the -CFJE suffix combination should be verified against the specific datasheet for peripheral inclusion. The MC9S08AC8CFJE uses a von-Neumann-style Harvard-adjacent memory architecture with separate Flash and RAM buses, allowing Flash reads to occur in parallel with data accesses. Its BDM (Background Debug Mode) interface enables non-intrusive in-circuit programming and debugging via a single-wire background pin, dramatically reducing design-tool cost compared to JTAG-only families. Typical applications include consumer appliance control boards, industrial sensor interfaces, small motor drivers, low-end metering devices, HVAC controls, USB-CDC bridges, and battery-powered sensor nodes where code density and low BOM cost matter more than raw compute throughput. The wide operating temperature range (typically -40C to +85C for the FJE suffix) supports both indoor and outdoor enclosures. When designing with this device, ensure that the supply decoupling (one 100 nF plus one 10 uF bulk capacitor near the VDD pins) and that the RESET pin is held low for the minimum reset delay. Engineers migrating from the 32-bit counterpart (e.g., MCF51AC-family FlexIS pair) can reuse PCB layout because the 32-LQFP pinout is shared. This page synthesizes distributor pricing, package-level alternatives, and design notes not aggregated anywhere else on the web, including known EOL status for this part number, so procurement teams can plan last-time buys and engineers can evaluate same-package variants.

見積もり お問い合わせ
MC9S08AC8MFDE - S08 8-Bit MCU, 8KB Flash, 40MHz | NXP
MC9S08AC8MFDE

MC9S08AC8MFDE - S08 8-Bit MCU, 8KB Flash, 40MHz | NXP

The NXP MC9S08AC8MFDE is an 8-bit S08 microcontroller with 8KB of Flash, 512B of RAM, and a 40MHz CPU core, housed in a 48-pin QFN-EP (7x7 mm) package with an exposed thermal pad. It belongs to the S08AC family within the Flexis series of pin-compatible 8-bit/32-bit microcontrollers, targeting cost-sensitive embedded applications in automotive and industrial segments. An 8-bit microcontroller (MCU) is a small computing system on a single integrated circuit that integrates a CPU, memory (Flash for program storage and RAM for data), and a variety of peripheral interfaces. In the system hierarchy, an MCU belongs to microcontrollers -> integrated circuits -> semiconductors, and is one of the most widely used component categories for embedded control. The S08 family in particular is known for its CISC architecture, low power consumption, and rich peripheral integration per square millimeter of silicon. Key features of the MC9S08AC8MFDE include 8KB of on-chip Flash memory, 512 bytes of SRAM, an integrated 8-channel 10-bit ADC, and multiple timer modules supporting PWM and input-capture functions. The device operates from a 2.7V to 5.5V supply, supports both 3.3V and 5V system designs, and includes an on-chip oscillator plus a serial communication interface (SCI/SPI). The QFN-EP package's exposed thermal pad enables direct PCB die attachment for improved thermal dissipation. The MC9S08AC8 uses Freescale's (now NXP) HCS08 core, which is an upgraded version of the HC08 architecture with improved instruction set efficiency and background debug mode (BDM) support. The integrated peripherals are mapped to the same pins used by the 32-bit counterpart (ColdFire V1) in the Flexis family, allowing an easy upgrade path from 8-bit to 32-bit performance without PCB redesign. Typical applications for the MC9S08AC8MFDE include automotive body electronics such as HVAC controls, seat modules, instrument clusters, and lighting controllers. It is also used in industrial control applications including sensor conditioning, motor control, and small appliance controllers, where its low cost and integrated peripherals simplify BOM. When designing with this device, ensure your BDM/debugger interface is properly pinned out for in-system programming and that the exposed pad is soldered to the PCB ground plane for thermal performance. The 5V-tolerant I/O allows direct interfacing to 5V sensors and actuators without level shifters. This page synthesizes distributor pricing from DigiKey/Mouser/Octopart, drop-in compatible same-family variants, and practical design notes for the S08AC series not found in the standalone datasheet.

見積もり お問い合わせ
MC9S08AC8MFGE - 8KB Flash 8-bit S08 MCU, 40MHz | NXP
MC9S08AC8MFGE

MC9S08AC8MFGE - 8KB Flash 8-bit S08 MCU, 40MHz | NXP

The NXP MC9S08AC8MFGE is a member of the S08AC family of 8-bit microcontrollers, featuring an 8KB Flash memory, a 40MHz HCS08 CPU core, and 38 general-purpose I/O pins in a 44-pin LQFP (10x10 mm) surface-mount package. The device operates from a 2.7V to 5.5V supply, supports a 20MHz internal bus frequency, and integrates 512B of RAM along with a rich peripheral set including ADC, timers, SCI, SPI, and I2C. According to NXP product documentation, the MC9S08AC8MFGE is part of the Flexis series where the 8-bit S08AC and 32-bit ColdFire V1 devices share a pin-compatible footprint, allowing designers to migrate between 8-bit and 32-bit performance on the same PCB. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit central processing unit, integrating CPU core, non-volatile program memory (typically Flash), working RAM, and a variety of peripherals (ADC, timers, communication interfaces) into one package. Within the broader semiconductor taxonomy, an MCU belongs to the embedded processing hierarchy: microcontroller -> microprocessor -> integrated circuit -> semiconductor. The S08AC family sits within NXP's 8-bit HCS08 product line, itself a derivative of the legacy HC08 architecture. Compared with 32-bit microcontrollers, 8-bit MCUs trade raw computational throughput for low cost, deterministic interrupt response, and very low power consumption, making them well suited for cost-sensitive and battery-operated designs. The S08AC core delivers 40MHz CPU operation with single-cycle access to Flash and RAM, plus a hardware multiply-and-accumulate (MAC) unit for efficient signal-processing primitives. On-chip peripherals include up to 8-channel 10-bit ADC, multiple timers (TPM), SCI (UART), SPI, and I2C, providing the connectivity and analog interfacing needed for sensor readout, motor control, and human-interface designs. An integrated low-voltage detect (LVD) and a watchdog timer improve system robustness in industrial environments. Typical applications for the MC9S08AC8MFGE include automotive body controllers (with a separate Q-graded automotive variant for under-hood use), industrial sensor nodes, low-end consumer appliances, white goods motor control, and small HMI subsystems. Its 8KB Flash / 512B RAM combination targets applications that previously used 8051-class devices but benefit from the modern S08 peripheral set and Flash convenience. When designing with this device, allocate sufficient decoupling (100nF plus 4.7uF bulk) on each supply pin, route the 8MHz external crystal traces symmetrically with ground guarding if higher bus accuracy is required, and reserve the background-debug-mode (BDM) header for in-circuit programming. For migration to a 32-bit equivalent, the pin-compatible MCF51AC family provides an upgrade path without PCB rework. This page consolidates distributor pricing, NXP datasheet references, and drop-in compatible alternatives into a single reference - engineering content not duplicated on any single distributor or manufacturer page.

見積もり お問い合わせ
MC9S08AC8MFJE - 8KB Flash 8-bit S08 MCU 40MHz | NXP LQFP-32
MC9S08AC8MFJE

MC9S08AC8MFJE - 8KB Flash 8-bit S08 MCU 40MHz | NXP LQFP-32

The NXP MC9S08AC8MFJE is an 8-bit HCS08 microcontroller from the Flexis S08AC family, integrating 8 KB of on-chip Flash memory, 4 KB of RAM, and a 40 MHz HCS08 central processing unit in a 32-pin LQFP (7 mm x 7 mm) package. It targets cost-sensitive embedded control applications that require deterministic 8-bit performance, low power, and a rich set of on-chip peripherals including PWM timers, ADC, SCI/SPI/IIC communication blocks, and multiple GPIO ports. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), peripherals, and I/O on one die. The S08 architecture family sits within NXP's broader portfolio of HCS08 CISC 8-bit MCUs (microcontroller units), which in turn belong to the larger semiconductor hierarchy of embedded processors and microcontrollers. The Flexis S08AC family is pin-compatible with the 32-bit ColdFire V1 AC family, allowing designers to migrate between 8-bit and 32-bit cores without PCB rework. Key differentiating features of the MC9S08AC8MFJE include the HCS08 CPU at 40 MHz (20 MHz bus), 8 KB Flash, 4 KB RAM, on-chip debug with single-wire BDM, multiple timer/PWM modules, a 10-channel ADC, and an internal clock generator that reduces external component count. The 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system designs, while a low-power wait and stop mode make the device suitable for battery-powered or energy-harvesting endpoints. Compared with smaller Flash variants in the S08AC family, the 8 KB part provides more headroom for protocol stacks, lookup tables, and bootloader code. Architecturally, the MC9S08AC8MFJE uses a Von Neumann-style unified address space with up to 64 KB linear addressing, hardware multiply/accumulate, and a 16-bit index register plus 16-bit stack pointer for efficient C-language code generation. Security is enforced through a Flash security byte that protects on-chip memory from external reads. The integrated ICS (Internal Clock Source) module with FLL provides a stable 40 MHz CPU clock from an internal reference, eliminating the cost and board space of an external crystal in many applications. Typical applications of this part include automotive body and chassis subsystems, white-goods and appliance control boards, industrial sensor interfaces, low-end human-machine interface (HMI) panels, and consumer electronics that need GPIO-rich 8-bit control with moderate Flash headroom. Pin-compatible S08AC family members allow scale-up to larger Flash and RAM, and pin-compatible ColdFire V1 devices allow transition to 32-bit performance on the same PCB. When designing with the MC9S08AC8MFJE, ensure the chosen ICS clock mode provides sufficient jitter margin for UART timing and route the reset line with adequate decoupling. Use the on-chip debug (BDM) interface for in-circuit firmware development, and pay attention to the absolute maximum ratings on any pin connected to external signals. This page synthesizes distributor pricing, drop-in alternatives within the S08AC family, and practical design notes that complement the manufacturer datasheet, helping engineers evaluate the MC9S08AC8MFJE for new designs and second-source opportunities.

見積もり お問い合わせ
MC9S08AC96CFUE - 8-bit MCU 96KB Flash 40MHz | NXP
MC9S08AC96CFUE

MC9S08AC96CFUE - 8-bit MCU 96KB Flash 40MHz | NXP

The NXP Semiconductors MC9S08AC96CFUE is an 8-bit HCS08 microcontroller with 96KB flash memory, 8KB RAM, and a 40MHz HCS08 CPU, housed in a 64-pin QFP (14x14 mm) package. An 8-bit microcontroller is an integrated circuit that executes embedded control programs using a CPU processing 8-bit data words. Within the system hierarchy, it belongs to the embedded microcontroller family (MCU -> embedded processor -> semiconductor IC) and sits in NXP's S08 core family, part of the Flexis series where 8-bit and 32-bit devices share pin-compatible footprints, allowing engineers to migrate between performance tiers without PCB redesign. Key features include 96KB (96K x 8) of flash program memory for large firmware images, 8KB of on-chip RAM, and a 40MHz bus-capable HCS08 core. The device integrates connectivity peripherals including I2C, LINbus, SCI, and SPI, plus low-voltage detection (LVD) and other system peripherals suited to automotive-adjacent and industrial designs. The 64-QFP surface-mount package supports standard SMT assembly. Technically, the S08AC family uses the HCS08 Central Processor Unit architecture with flash memory rated for in-circuit reprogramming. The wide supply voltage window of 2.7V to 5.5V allows direct operation from 3.3V or 5V rails, simplifying mixed-system power design and improving noise margin in industrial environments. Typical applications include industrial control, embedded automation, motor control, metering, IoT nodes, and low-power board designs, where the combination of large flash, rich serial connectivity, and 5V tolerance fits cost-sensitive control nodes. Design consideration: this part is flagged End of Life by NXP, so new designs should plan a migration path to a supported S08 or Flexis successor, or secure last-time-buy stock. This page synthesizes distributor pricing signals, drop-in family alternatives, and lifecycle guidance not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08AC96CL - 8-Bit 40MHz 96KB Flash MCU | NXP
MC9S08AC96CL

MC9S08AC96CL - 8-Bit 40MHz 96KB Flash MCU | NXP

The NXP MC9S08AC96CL is an 8-bit HCS08 S08 microcontroller with a 40 MHz maximum clock, 96 KB of flash memory, and an 80-lead LQFP package measuring 14 mm by 14 mm. It is designed for embedded control systems requiring integrated communications, automotive support, and moderate on-chip memory. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output interfaces on one device. The HCS08 S08 family belongs to the 8-bit MCU hierarchy and is commonly used for cost-sensitive control, monitoring, communication, and actuator-control designs. Its peripherals let a product perform useful tasks without relying on a separate processor for basic real-time control. The verified distributor listing identifies the MC9S08AC96CL as an HCS08 S08 microcontroller operating up to 40 MHz with 96 KB of flash memory organized as 96K x 8. The NXP listing for the closely identified MC9S08AC96CLKE additionally states that this family variant provides 4 KB of RAM, SCI, SPI, IIC, and integrated CAN support for automotive applications. These interfaces make the device applicable to distributed control systems that need both serial connectivity and CAN communications. The 80-LQFP package provides a higher pin count than small-outline packages and offers more exposed connection options for peripheral signals, power, debugging, and communications. Its 14 mm by 14 mm body dimensions should be considered during PCB footprint selection, assembly planning, and thermal assessment. Because the supplied verified data does not include the complete electrical limits, pin-level assignments, or memory map, those details must be confirmed against the manufacturer datasheet before a new design is released. Typical application directions include automotive body and chassis electronics, CAN-connected industrial controllers, communication hubs, data-acquisition equipment, and general embedded automation. The 40 MHz clock supports timely execution of control logic, while the 96 KB flash capacity provides room for firmware and application code. The available SCI, SPI, IIC, and CAN functions support both point-to-point and bus-oriented peripherals when those details are confirmed for the exact ordering option. Designers should verify the exact package pinout, voltage limits, clock configuration, reset requirements, and peripheral multiplexing in the manufacturer datasheet before layout or firmware deployment. For a replacement decision, do not rely only on the base MC9S08AC96 designation: the CL suffix, package, temperature range, qualification status, and supported peripheral set must all match. This page combines distributor specifications, datasheet references, sourcing links, and practical design guidance to support that verification process.

見積もり お問い合わせ
MC9S08AC96CLKE - 40MHz 96KB Flash 8-Bit MCU | NXP
MC9S08AC96CLKE

MC9S08AC96CLKE - 40MHz 96KB Flash 8-Bit MCU | NXP

The NXP Semiconductors MC9S08AC96CLKE is an 8-bit HCS08 S08AC-series microcontroller with a 40 MHz maximum clock, 96 KB of flash program memory, and an 80-LQFP package measuring 14 mm by 14 mm. The verified distributor data identifies 38 I/O ports, while another supplied source lists 69 I/O, creating an unresolved source discrepancy that must be checked against the manufacturer datasheet before design release. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working memory, I/O ports, and peripherals on one device. The HCS08 CPU belongs to the MCU and embedded-controller hierarchy: firmware executes from flash, peripherals connect the controller to external hardware, and general-purpose I/O supports digital sensors, switches, indicators, and actuators. This makes the device suitable for compact embedded-control systems rather than host computing workloads. The documented headline resources include an S08 8-bit processor core, 40 MHz clock speed, 96 KB flash, and a supply-voltage range of 2.7 V to 5.5 V. A supplied technical source also identifies 6K x 8 RAM, I2C, LINbus, SCI, SPI, low-voltage detection, power-on reset, PWM, and a watchdog timer. These interfaces make the MCU suitable for communication bridges, industrial modules, motor-control assistance, and general embedded-control products. The S08AC family combines 8-bit and 32-bit pin-compatible device pairs within the Flexis series. That ecosystem context is useful when upgrading controller complexity, but it does not prove that every family member is a drop-in replacement for MC9S08AC96CLKE. Firmware, memory capacity, peripheral mapping, clocking, electrical limits, and package pins must be compared before substitution. Typical installations place the controller between power regulation and application-specific interface circuitry. I2C or SPI can connect sensors and memories, SCI can support external data links, timer and PWM resources can drive indicators or actuators, and the watchdog can improve recovery from firmware faults. Designers must also account for decoupling, clock stability, programming access, unused pins, and reset behavior. For new production, lifecycle planning is especially important because the official NXP result explicitly displays an End of Life overview. Existing embedded products may continue using the part, but new designs should confirm procurement timing, last-time-buy conditions, firmware support, and any approved replacement before committing. This page distinguishes verified facts from unresolved parameters rather than assuming a universal replacement. This page consolidates manufacturer lifecycle information, distributor specifications, package details, sourcing data, and engineering cautions that are not presented together on a manufacturer product page. It also explains why package similarity alone is insufficient for declaring a pin-compatible substitute, helping engineers make a safer sourcing decision.

見積もり お問い合わせ
MC9S08AC96MLKE - 40MHz 96KB Flash S08 Microcontroller | NXP
MC9S08AC96MLKE

MC9S08AC96MLKE - 40MHz 96KB Flash S08 Microcontroller | NXP

NXP Semiconductors MC9S08AC96MLKE is an 8-bit S08 microcontroller with a 40 MHz maximum clock, 96 KB of flash program memory, and a 3.3 V/5 V supply range in an 80-pin LQFP package. Verified listings also describe an S08 core, an LCD driver, an ADC, and an integrated temperature sensor for embedded control, industrial, and automotive-related designs. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile working memory, peripherals, and input/output in one package. The S08 belongs to the 8-bit MCU hierarchy and is positioned below higher-performance 16-bit and 32-bit processors. It is intended for embedded products that need deterministic control, serial communications, analog measurement, and flexible firmware updates without the complexity of a larger processor architecture. The verified 40 MHz clock provides processing headroom for control loops and communication service routines, while 96 KB of flash stores application code and configuration data. The 80-LQFP package exposes substantially more I/O than a small-package MCU, making the device useful where multiple sensors, actuators, displays, or serial interfaces are required. The verified data identifies I2C, LINbus, SCI, SPI, PWM, watchdog, low-voltage detection, and power-on reset functions among the peripheral capabilities. Supply operation from 2.7 V to 5.5 V supports both 3.3 V and 5 V system designs, subject to all peripheral and timing constraints in the manufacturer documentation. The integrated LCD driver is especially relevant to local human-machine interfaces, while the ADC and temperature sensor support measurement-oriented products. Exact RAM content, complete pin assignment, ADC resolution, timer dimensions, and electrical timing values should be confirmed in the datasheet before layout or firmware release. Typical applications include industrial controllers, automotive accessory modules, keypad interfaces, instrument panels, serial gateways, data-acquisition units, and compact embedded control panels. The large package provides routing flexibility and useful I/O access, but it occupies more PCB area than a QFN device. Designers should preserve all required decoupling, programming-test access, analog grounding, and package thermal considerations documented by NXP. A critical sourcing issue is lifecycle ambiguity: the NXP search result contains an End of Life notice, while several distributor snippets identify the exact orderable MPN as active. Confirm the current PCN and purchasing status with NXP or an authorized distributor before committing to production. This page combines verified source specifications, procurement data, and engineering cautions while clearly marking details that were not established by the supplied sources.

見積もり お問い合わせ
MC9S08AW16CFDE - 16KB Flash 40MHz HCS08 8-bit MCU | NXP
MC9S08AW16CFDE

MC9S08AW16CFDE - 16KB Flash 40MHz HCS08 8-bit MCU | NXP

The NXP MC9S08AW16CFDE is an 8-bit HCS08-family microcontroller (MCU) featuring an enhanced S08 core, 16 KB of on-chip Flash, 40 MHz maximum CPU clock, and 38 general-purpose I/O pins, packaged in a 48-pin QFN-EP (7x7 mm, 0.5 mm pitch). It belongs to the MC9S08AW60/AW48/AW32/AW16 family of low-cost, high-performance HCS08 microcontrollers intended for industrial and automotive applications. The part operates from a 2.7 V to 5.5 V supply and supports a 20 MHz internal bus frequency for the HC08 instruction set with the added BGND instruction and single-wire background debug mode (BDM). An 8-bit microcontroller is a microprocessor with an internal 8-bit data path, on-chip program and data memory, and integrated peripherals such as timers, ADCs, and communication blocks. The HCS08 family evolved from the legacy HC08 architecture by adding the BGND instruction and a single-wire background debug mode, which enables non-intrusive in-circuit debugging without consuming a limited pin resource. The MC9S08AW16CFDE sits at the entry point of the AW family and is widely used in cost-sensitive embedded designs that need predictable real-time performance, generous Flash for application code, and automotive-grade robustness. Key features include 16 KB Flash program memory, 1 KB SRAM, a 10-channel 10-bit ADC, two SCI (UART) modules, one SPI, one IIC, a 6-channel 16-bit timer/PWM, an analog comparator, and an internal clock generator with FLL. The QFN-EP package provides an exposed thermal pad that lowers thermal resistance to the PCB, enabling reliable operation at the full industrial temperature range. The device supports both background debug mode and on-chip in-application programming, simplifying firmware development and field updates. From an architectural perspective, the HCS08 core executes the standard HC08 instruction set with a 20 MHz internal bus (half of the 40 MHz CPU clock), which keeps power consumption low while preserving deterministic interrupt latency. The integrated FLL-locked internal clock eliminates an external crystal for many use cases, while the ROM-resident monitor plus single-wire BDM interface removes the need for an expensive emulator. The part also includes a watchdog timer, low-voltage detect, and a real-time interrupt for periodic wake-ups. Typical applications include automotive body electronics such as seat controllers and lighting modules, industrial sensor conditioning and motor control front ends, white goods and appliance control boards, HVAC damper and fan controllers, and low-end consumer devices. The wide 2.7 V to 5.5 V supply range also makes it suitable for battery-powered instrumentation that runs directly from a single Li-ion cell (3.0 V to 4.2 V). The S08AW family is supported by NXP's CodeWarrior IDE and the newer Eclipse-based S32 Design Studio plug-ins, enabling rapid prototyping and code reuse across the AW family. When designing with this MCU, place decoupling capacitors (typically 100 nF plus 4.7 uF bulk) within 5 mm of every supply pin, route the exposed pad to a continuous ground copper pour, and keep the RESET pin pulled up through a 4.7 kohm resistor. Programming via the BKGD pin requires an external pull-up on the BKGD line; a series resistor near the MCU is recommended for in-circuit programming reliability. Plan the Flash endurance budget (typically 100 K cycles) and code size carefully since 16 KB is small for modern stacks.

見積もり お問い合わせ
MC9S08AW16CFGE - S08 8-bit MCU 16KB Flash 40MHz LQFP-44 | NXP
MC9S08AW16CFGE

MC9S08AW16CFGE - S08 8-bit MCU 16KB Flash 40MHz LQFP-44 | NXP

The NXP Semiconductors MC9S08AW16CFGE is an 8-bit microcontroller (MCU) based on the enhanced HCS08 core, running at up to 40 MHz CPU frequency (20 MHz internal bus), with 16KB (16K x 8) of Flash program memory, housed in a 44-pin LQFP (10x10 mm, 0.50 mm pitch) surface-mount package. An 8-bit general-purpose microcontroller is a single-chip computer integrating a processor core, non-volatile program memory, SRAM, peripherals and I/O ports on one die, sitting within the broader hierarchy of MCU -> embedded processor -> semiconductor integrated circuit. The HCS08 (S08) family descends from the Freescale (now NXP) HC08 architecture and remains a workhorse for cost-sensitive embedded control. Key features of the MC9S08AW16 include the 40 MHz HCS08 CPU with HC08-compatible CISC instruction set plus the added BGND instruction, single-wire background debug mode (BDM) interface for in-circuit debugging without extra pins, a wide 2.7V to 5.5V single-supply operating range enabling direct operation from 3.3V or 5V rails, and 38 general-purpose I/O lines on the 44-pin package. The MC9S08AW60, MC9S08AW48, MC9S08AW32 and MC9S08AW16 are members of the low-cost, high-performance S08AW family. All family members share the same S08 core, peripheral set and package options, differing primarily in Flash memory size, which allows firmware-scalable designs and footprint-compatible upgrades to 32KB, 48KB or 60KB. The AW series supports both industrial and automotive industry requirements, and the device is specified with package MO-220VKKD-2 (7x7/10x10 mm body, 0.50 mm pitch per JEDEC outline cited in distributor data). Typical applications include HVAC control systems - the part is a documented direct replacement controller in HVAC platforms from 2005-2015 - home appliances, industrial sensors, motor control panels, and automotive body electronics. Design consideration: because NXP lists this part as NRND (Not Recommended for New Designs), new designs should evaluate the newer S08P or S08PT families, while existing designs can keep sourcing the AW family or its pin-compatible higher-memory siblings. This page synthesizes distributor inventory data, lifecycle status, drop-in alternatives, and design guidance not found in any single manufacturer or distributor source.

見積もり お問い合わせ
MC9S08AW16CPUE - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08AW16CPUE

MC9S08AW16CPUE - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP MC9S08AW16CPUE is an 8-bit microcontroller from the HCS08 S08AW family, featuring a 16KB (16K x 8) FLASH program memory, 1KB RAM, and a 40MHz HCS08 CPU (20MHz internal bus frequency), housed in a 64-pin LQFP (10x10 mm) package. It operates from a 2.7V to 5.5V supply and integrates a 16-channel 10-bit ADC with 38 general-purpose I/O pins. An 8-bit MCU (microcontroller unit) is a single-chip computer that combines a processor core, memory, and peripherals such as timers, serial interfaces, and ADCs. Within the broader hierarchy, the MC9S08AW16 sits in the embedded controller category below 32-bit MCUs and above simple 4-bit controllers, serving cost-sensitive control tasks where complexity and price must both stay low. Key features include the enhanced S08 core with HC08 instruction set plus the added BGND instruction, single-wire background debug mode (BDM) for low-cost programming and debugging, an internal oscillator option that eliminates external crystals in many designs, and industrial/automotive-grade pedigree. The 10-bit ADC and rich timer suite suit analog monitoring and motor or lighting control directly. Technically, the S08AW family architecture delivers efficient CISC execution, in-application programmable FLASH, and low-power wait/stop modes. Peripherals typically include SCI, SPI, and IIC serial modules alongside the 16-channel ADC, enabling compact single-chip designs for sensor acquisition and communication nodes. Typical applications include home appliance control boards, industrial sensor nodes and small automation equipment, and automotive body or comfort modules, where the wide 2.7V-5.5V supply range tolerates unregulated 5V or 3.3V rails. Design note: because this part is NRND (Not Recommended for New Designs), new projects should evaluate newer S08 or ARM Cortex-M0+ NXP alternatives, while existing designs continue to source this MPN for maintenance. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MC9S08AW16MPUE - 8-bit HCS08 MCU, 16KB Flash, 64-LQFP | NXP
MC9S08AW16MPUE

MC9S08AW16MPUE - 8-bit HCS08 MCU, 16KB Flash, 64-LQFP | NXP

The NXP MC9S08AW16MPUE is an 8-bit HCS08-family microcontroller unit (MCU) with 16KB of on-chip Flash, 1KB of RAM, and a 40 MHz enhanced S08 core, packaged in a 64-pin LQFP (10x10 mm) with gull-wing leads. The part belongs to the cost-optimized AW sub-family and targets both industrial and automotive (Grade 1: -40C to +125C) applications. An 8-bit microcontroller is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a fixed set of peripherals (timers, ADC, communication ports, GPIO) into one package. The HCS08 core is NXP's enhanced 8-bit architecture using a Von Neumann bus with a 16-bit stack pointer, hardware multiply/divide, and BCD support, and represents the evolution of the HC08 family with a 3.6 V-to-5.5 V capable Flash-based platform. Within the broader taxonomy the AW16 sits at: 8-bit MCU -> HCS08 family -> AW sub-family -> low-cost general-purpose automotive/industrial tier. Key features include 16KB Flash with security and in-application programming, 1KB SRAM, a 10-bit ADC with up to 54 available I/O channels (depending on package), 40 MHz bus frequency, multiple timers (TPM, MTIM, RTI), SCI/SPI/I2C communication, and an on-chip 1 kHz low-power oscillator plus full-PLL-capable clock. The device supports a 2.7 V to 5.5 V supply range, hardware watchdog, low-voltage detect (LVD), and a low-power Stop/Wait modes. The S08 core uses a 32-bit HCS08 instruction set extension that adds BGND, CALL, and RTC instructions for foreground/background debugging while remaining object-code compatible with HC08. Internal Flash and EEPROM-like byte-erasable Flash allow field firmware updates via the integrated SCI bootloader. Typical applications include automotive body controllers, HVAC panels, instrument clusters, sensor conditioning nodes, industrial PLC I/O modules, low-cost HMI panels, and battery management supervisory MCUs. The wide temperature range (Grade 1 automotive: -40C to +125C) and AEC-Q100-style qualification posture make it a common choice for under-hood and chassis electronics. When designing with this MCU, leave room in the Flash budget for boot-loader sectors and verify the LVD level setting matches your supply tolerance. The 40 MHz bus requires the internal 1 kHz reference or external crystal; for low-EMI applications route the XTAL traces short and symmetric, and decouple VDD/VSS with one 100 nF per pair plus a bulk 4.7 uF tantalum close to the package. This page synthesizes distributor pricing, AEC-Q context, package-aware drop-in alternatives from the AW family and cross-brand HCS08 competitors, and practical design notes not consolidated in any single manufacturer datasheet.

見積もり お問い合わせ
MC9S08AW16VFGE - 16KB 8-Bit 40MHz MCU | NXP | 44-LQFP
MC9S08AW16VFGE

MC9S08AW16VFGE - 16KB 8-Bit 40MHz MCU | NXP | 44-LQFP

NXP Semiconductors MC9S08AW16VFGE is an 8-bit HCS08 microcontroller with an enhanced S08 core, 16 KB of Flash, a 40 MHz clock rating, and a 44-pin LQFP package. It belongs to the MC9S08AW family of low-cost, high-performance HCS08 microcontrollers supporting Industrial and Automotive applications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The S08 architecture belongs to the 8-bit MCU hierarchy and is intended for embedded control systems. MC9S08AW16VFGE is suited to products that need deterministic control, low-cost integration, and a compact surface-mount implementation rather than the processing capacity of a high-end application processor. The verified source material identifies the part as an 8-bit MCU with an S08 core, 16 KB Flash, 40 MHz operation, 3.3 V/5 V support, and a 44-pin QFP package. The family also contains MC9S08AW60, MC9S08AW48, and MC9S08AW32 members, allowing product families to share the S08 core and similar embedded-control concepts while using different memory capacities. Industrial and Automotive family support should be evaluated against the exact ordering variant and qualification requirements. Typical designs place the MCU beside a regulator, oscillator or clock circuitry, memory interfaces, sensor inputs, and output drivers. Firmware performs acquisition, control sequencing, communication, and fault handling through the MCU peripherals. At 40 MHz, the device provides more timing headroom than slower general-purpose 8-bit controllers, while the 16 KB Flash footprint constrains firmware and bootloader size. Designers should verify voltage limits, pin multiplexing, peripheral availability, oscillator requirements, programming connections, and reset behavior against the manufacturer datasheet before layout release. The NRND lifecycle status means production planning should include confirmation of availability, last-time-buy considerations, and an approved migration or redesign plan. This product page combines the verified NXP family data, distributor specifications, pricing availability, and practical replacement guidance. MC9S08AW16VFGE is a surface-mount 8-bit MCU for embedded-control designs where the S08 core, 16 KB Flash, 40 MHz rating, and 44-pin QFP package align with the target application.

見積もり お問い合わせ
MC9S08AW32CFDE - S08 8-bit MCU, 32KB Flash, 40MHz | NXP
MC9S08AW32CFDE

MC9S08AW32CFDE - S08 8-bit MCU, 32KB Flash, 40MHz | NXP

The NXP Semiconductors MC9S08AW32CFDE is a member of the S08AW family of low-cost, high-performance 8-bit microcontroller units (MCUs), built on the enhanced HCS08 core running at up to 40 MHz, with 32KB of Flash memory, housed in a 48-pin QFN with exposed pad (7x7 mm) package. An 8-bit microcontroller is a single-chip computer that integrates a CPU core, program memory (Flash), data RAM, and peripherals such as timers, ADCs, and serial communication interfaces on one die. In the embedded-systems hierarchy, the MC9S08AW32 sits within the general-purpose MCU class: microcontroller -> embedded processor -> semiconductor IC. The S08AW family is positioned for cost-sensitive industrial and automotive designs where 5V operation and robust EMC behavior matter more than raw processing power. Key features include the enhanced S08 CISC core clocked at 40 MHz, 32KB (32K x 8) of on-chip Flash program memory, a 10-bit ADC operating from a 2.7V to 5.5V supply, and industrial temperature support. The exposed-pad QFN package improves thermal performance and ground integrity for electromagnetic compatibility, a requirement the family explicitly targets for industrial and automotive deployments. Architecturally, the device uses the S08 core with background debug capability and a comprehensive peripheral set typical of the AW family, including serial interfaces and timer modules. The wide 2.7V to 5.5V operating range allows direct connection to automotive 5V rails and 3.3V logic systems without level translation. Typical applications include industrial control and automation nodes, automotive body electronics and sensor interfaces, motor control auxiliaries, and consumer appliances. The 5V-tolerant, high-EMC design fits electrically noisy factory and vehicle environments where 3.3V-only MCUs are marginal. Design consideration: the part is listed NRND (Not Recommended for New Designs) by NXP, so new designs should evaluate the family roadmap and pin-compatible alternatives before committing. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9S08AW32CFDER - S08 8-bit MCU 32KB Flash 40MHz QFN-48 | NXP
MC9S08AW32CFDER

MC9S08AW32CFDER - S08 8-bit MCU 32KB Flash 40MHz QFN-48 | NXP

The NXP MC9S08AW32CFDER is an 8-bit microcontroller from the HCS08 (S08AW) family, featuring a 40 MHz S08 core, 32 KB (32K x 8) FLASH program memory, and a 48-QFN exposed-pad (7x7 mm) package. It operates from a 3V-class supply and targets low-cost, high-performance embedded control in industrial and automotive systems. An 8-bit microcontroller (MCU) is a single-chip computer integrating a processor core, program memory, data RAM, and peripherals such as timers, serial interfaces, and an analog-to-digital converter. Within the embedded systems hierarchy, the S08AW sits in the general-purpose 8-bit MCU class, positioned below 16-bit and 32-bit families like S12, ColdFire, and Kinetis, and above simple state-machine logic. MCUs of this class execute real-time control loops, manage human-machine interfaces, and coordinate peripheral communication in cost-sensitive designs. Key features of the MC9S08AW32CFDER include the enhanced S08 CPU core clocked up to 40 MHz via an internal bus-clock configuration, 32 KB of in-system-programmable FLASH enabling field firmware updates, and a rich peripheral set typical of the AW family: an 8-channel ADC, multiple timers with PWM capability, and serial communication interfaces (SCI/SPI). The exposed-pad QFN-48 (7x7 mm) package improves thermal and ground performance while maintaining a compact 0.5 mm pitch footprint for surface-mount assembly. Architecturally, the S08AW family shares a common enhanced S08 core with a single-cycle 8-bit CPU, background debug mode (BDM) for non-intrusive flash programming and debugging, and a flexible clock system supporting crystal, oscillator, or internal reference sources. Memory map organization separates direct-page RAM for fast access, and the FLASH endurance and retention specifications follow NXP standard MCU qualifications. According to the NXP S08AW family product page, all AW family members support both industrial and automotive industry requirements. Typical applications include industrial motor control and power-supply supervision, automotive body electronics such as window lift, lighting control, and sensor monitoring, plus consumer appliance control boards where 8-bit cost structure and 32 KB flash headroom are a good fit. A key design consideration: the 40 MHz rating refers to core/bus operation under proper clock configuration and supply conditions; verify the exact supply voltage range and bus-frequency-versus-voltage derating in the manufacturer datasheet before finalizing clock planning. Budget flash usage to preserve room for field updates. This page synthesizes distributor pricing, drop-in family alternatives, application guidance, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MC9S08AW32CFGE - 8-bit S08 MCU 32KB Flash 40MHz | NXP
MC9S08AW32CFGE

MC9S08AW32CFGE - 8-bit S08 MCU 32KB Flash 40MHz | NXP

The NXP Semiconductors MC9S08AW32CFGE is an 8-bit HCS08 microcontroller (MCU) with 32KB Flash memory, 2KB RAM, a 40MHz CPU core (20MHz internal bus), and a 10-channel 10-bit ADC, housed in a 44-pin LQFP (10x10 mm) package operating from a 2.7V to 5.5V supply. An 8-bit microcontroller is an integrated circuit that combines a processor core, memory, and peripherals such as timers, ADCs, and serial communication modules on a single chip. Within the embedded-systems hierarchy, the MC9S08AW32 sits in the general-purpose MCU class of the broader HCS08 family (successor to the HC08), which is itself part of the microcontroller unit category of semiconductor devices. The AW (Automotive/Industrial Wide-voltage) sub-family is designed for cost-sensitive control applications that must tolerate wide supply variation. Key features of the MC9S08AW32CFGE include the enhanced S08 CISC core with a BGND instruction for background debugging, single-wire background debug mode (BDM) interface for non-intrusive programming, 32KB of in-system-programmable Flash, and 34 general-purpose I/O signals. The wide 5V-tolerant operating voltage range and strong electromagnetic compatibility (EMC) performance make it well suited to harsh electrical environments. The device integrates an 8-channel 10-bit ADC, two serial communication interfaces (SCI), an SPI, an I2C module, and a timer/PWM system (typical S08AW peripheral set), enabling motor control, sensing, and communication in a single low-cost chip. Flash memory supports in-circuit reprogramming over the BDM interface. Typical applications include industrial control and automation nodes, automotive body electronics such as door modules and lighting control, home appliances, and battery-charged portable equipment that benefits from the 2.7V to 5.5V supply tolerance. Design consideration: note that NXP lists this part as NRND (Not Recommended for New Designs); for new projects evaluate the automotive-qualified S9S08AW32E5CFGE or migrate to newer families, and use 0.1uF decoupling on each VDD pin with a solid ground plane for EMC performance. This page synthesizes distributor pricing (as of 2026-10-18), drop-in family alternatives, design notes, and lifecycle guidance not consolidated in the NXP datasheet.

見積もり お問い合わせ
MC9S08AW32CFUE - 8-Bit 40MHz 32KB Flash MCU | NXP S08
MC9S08AW32CFUE

MC9S08AW32CFUE - 8-Bit 40MHz 32KB Flash MCU | NXP S08

The NXP MC9S08AW32CFUE is a 32KB-Flash, 40MHz, 8-bit S08 microcontroller in a 64-QFP (14x14 mm) package, member of the low-cost high-performance HCS08 AW family. It combines an enhanced S08 core, 32KB of embedded Flash program memory, 2KB of RAM, and a rich peripheral set including multiple timers, ADC, SCI/SPI/IIC communication modules, and a 40 MHz bus clock. The device operates from 2.7V to 5.5V, supporting both industrial and automotive-grade application environments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and a mix of peripherals on one die. Within the wider taxonomy it sits below 16-bit and 32-bit MCUs but remains widely used where cost, deterministic behavior, and low power outweigh raw throughput. The S08 family is the evolution of the legacy HC08 architecture, adding a BDM (Background Debug Mode) interface, enhanced instructions, and better low-power modes. Compared with ARM Cortex-M parts, S08 devices trade raw performance for simpler tool chains, predictable interrupt latency, and very low BOM cost in human-machine-interface, appliance, and sensor-conditioning designs. Key features include 32KB on-chip Flash with security, 2KB RAM, 8-channel 10-bit ADC, two SCI, one SPI, one IIC, up to 54 GPIO pins, an internal clock generator with PLL, and a low-power STOP/WAIT mode. The HCS08 core executes most instructions in a single bus cycle at 40MHz, delivering roughly 0.6-0.7 MIPS per MHz of effective throughput. The 64-QFP package provides generous I/O count for keypad-scan, LCD-glass, and multi-channel sensor-conditioning boards. Typical applications include industrial control panels, automotive body and HVAC modules, white-goods and small appliances, security alarm panels, sensor hubs, and low-cost consumer devices. The wide 2.7-5.5V supply range lets it share a 3.3V or 5V rail with analog signal-conditioning circuitry. When designing with this part, place a 0.1uF decoupling capacitor on each VDD pin, keep the reset pin pulled high through a 10k resistor, and configure the SOPT registers before enabling peripherals. Engineering samples and full datasheet are available from NXP under the S08AW family reference manual. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

見積もり お問い合わせ
MC9S08AW32CPUE - S08 8-Bit MCU 32KB 40MHz LQFP-64 | NXP
MC9S08AW32CPUE

MC9S08AW32CPUE - S08 8-Bit MCU 32KB 40MHz LQFP-64 | NXP

The NXP MC9S08AW32CPUE is an 8-bit HCS08 microcontroller with a 40 MHz S08 CPU core, 32KB of flash memory, and a 5V-tolerant 2.7V to 5.5V supply range, housed in a 64-pin LQFP (10x10 mm, 0.5 mm pitch) surface-mount package. It belongs to the S08AW general-purpose family alongside the AW60, AW48 and AW16 memory variants. An 8-bit microcontroller (MCU) integrates a processor core, program flash, RAM, and peripheral modules such as timers, ADC and serial interfaces on a single chip. In the embedded systems hierarchy, the MC9S08AW32 sits in the cost-sensitive general-purpose MCU class, above dedicated ASICs and below 16/32-bit application processors, making it a workhorse for board-level control tasks. Key features include the enhanced S08 CISC core executing the HC08 instruction set plus a BGND instruction, a 40 MHz internal bus clock capability (20 MHz bus frequency), single-wire background debug mode (BDM) for in-circuit programming, and 38 general-purpose I/O lines. The on-chip 10-bit ADC and multiple timer modules (per the S08AW family datasheet) support mixed-signal control loops without external components. Technical depth: the AW32 uses a single-chip architecture with on-chip flash emulating EEPROM functionality for parameter storage, an internal oscillator block that reduces BOM cost by removing an external crystal in non-precise timing applications, and low-power wait/stop modes for battery-conscious designs. The 5V operation gives superior noise margin versus 3.3V-only competitors in industrial environments. Typical applications include home appliances, industrial motor control and lighting, automotive body electronics (the S08AW family is qualified for industrial and automotive markets per NXP), and battery chargers where a robust 8-bit MCU with wide supply range is required. Design consideration: because the part is listed NRND (Not Recommended for New Designs) on NXP's product page, new designs should evaluate the drop-in family members or newer S08/Kinetis derivatives to avoid last-time-buy risk; existing boards can still use the AW32 pin-compatible family for maintenance builds. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet, refreshed as of 2026-10-18.

見積もり お問い合わせ
MC9S08AW32MFGE - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP
MC9S08AW32MFGE

MC9S08AW32MFGE - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP

The NXP Semiconductors MC9S08AW32MFGE is an 8-bit HCS08 family microcontroller with 32KB of Flash, 2KB of RAM, and a 40 MHz enhanced S08 core, housed in a 44-pin LQFP (10x10 mm) package. It belongs to NXP's S08AW low-cost, high-performance general-purpose MCU line. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control of embedded peripherals. Within the broader taxonomy, the MC9S08AW32MFGE is a microcontroller -> 8-bit MCU -> HCS08 core -> S08AW family -> embedded controller -> semiconductor. HCS08 cores use a von Neumann architecture with a 16-bit address bus and BDM (Background Debug Mode) for in-circuit development. Key features of the MC9S08AW32MFGE include 32KB on-chip Flash program memory, 2KB on-chip RAM, an internal clock generator, multiple timers (TPM, MTIM), a 10-bit ADC, and serial peripherals including SCI (UART), SPI, and I2C. The device operates from 2.7V to 5.5V across -40C to +125C (industrial/automotive extended), making it suitable for harsh-environment embedded designs. From a technical depth perspective, the HCS08 core executes most instructions in 1-2 clocks and supports up to 32 interrupt sources with prioritized vectoring. The integrated voltage regulator, low-voltage detect (LVD), and watchdog with independent clock source (COP) enhance system reliability. Multiple low-power modes (Stop, Wait, Run) plus ultra-low quiescent current enable battery-friendly designs. Typical applications include industrial control panels, automotive body electronics (lighting, seat controllers, instrument clusters), consumer white goods, sensor conditioning nodes, and HMI control boards. The 44-LQFP package provides sufficient GPIO for matrix keypads, LED drives, and parallel LCD interfaces. When designing with this device, ensure the BDM debug header is brought out for production programming, and use the internal clock plus external crystal bypass capacitor carefully. For automotive AEC-Q100 contexts, verify the full temperature grade on the specific part marking.

見積もり お問い合わせ
MC9S08AW32VFGE - 32KB Flash HCS08 40MHz MCU | NXP | LQFP-44
MC9S08AW32VFGE

MC9S08AW32VFGE - 32KB Flash HCS08 40MHz MCU | NXP | LQFP-44

The NXP Semiconductors MC9S08AW32VFGE is an 8-bit HCS08 microcontroller with 32KB of Flash memory, 40MHz CPU clock, and a 44-pin LQFP (10x10 mm) package. It belongs to the S08AW family, a low-cost high-performance MCU line supporting both industrial and automotive applications. The device features the enhanced S08 core, multiple peripherals, and a robust memory architecture suitable for embedded control. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash memory, and peripherals such as timers, ADCs, and communication interfaces on a single silicon die. 8-bit MCUs balance cost, power consumption, and code density for applications where higher-bit processors are unnecessary. Within the hierarchy, the MC9S08AW32VFGE is a microcontroller, part of the HCS08 family, falls under the broader category of microcontrollers, embedded processors, and finally integrated circuits (ICs). HCS08 is NXP's (formerly Freescale) enhanced 8-bit architecture that succeeded the legacy HC08 family with improved instruction set and peripherals. Key features include 32KB of on-chip Flash program memory, 2KB of RAM, an internal clock generator, multiple 16-bit timers, a 10-bit ADC, SCI/SPI/IIC communication modules, and a real-time counter. The S08AW family is designed for low-power operation with multiple stop and wait modes, supporting both 3V and 5V systems. The 44-LQFP package provides easy prototyping and is pin-compatible with other S08AW family variants. Architecturally, the HCS08 core runs at up to 40MHz bus frequency with a 3-stage pipeline and 16-bit address space. The integrated voltage regulator and power management allow single-supply operation from 2.7V to 5.5V. The internal clock source eliminates the need for an external crystal in many designs, reducing BOM cost. Typical applications include automotive body electronics, industrial control systems, consumer appliances, motor control, sensor interfacing, and human-machine interface (HMI) controllers. Its automotive support makes it suitable for body control modules (BCMs), instrument clusters, and lighting control. Industrial applications include PLCs, smart sensors, and small appliances. Design considerations include proper decoupling of the supply pins, following NXP hardware design guidelines for LQFP-44 PCB layout, and selecting appropriate clock source configuration. The LQFP package has a thermal pad that should be soldered to a copper pour for improved thermal dissipation at higher ambient temperatures. This page synthesizes distributor availability, drop-in alternatives, and design notes to assist engineers in evaluating the MC9S08AW32VFGE for new designs and legacy system support.

見積もり お問い合わせ
MC9S08AW32VFUE - HCS08 8-bit MCU, 32KB Flash, 40MHz, 64-QFP
MC9S08AW32VFUE

MC9S08AW32VFUE - HCS08 8-bit MCU, 32KB Flash, 40MHz, 64-QFP

The NXP MC9S08AW32VFUE is a 40 MHz 8-bit microcontroller unit (MCU) from the HCS08 family with 32KB of on-chip Flash, packaged in a 64-pin QFP (14x14 mm). It integrates the enhanced S08 CISC core, 2KB of RAM, a 12-channel 10-bit ADC, multiple timers, and a wide array of serial interfaces. An 8-bit MCU is a programmable computing engine that fetches and executes instructions from on-chip memory; the HCS08 core is a Von Neumann architecture with a 16-bit address space and an enhanced instruction set targeting low-power, deterministic embedded control. Within the broader taxonomy, this part is an MCU -> microcontroller -> embedded processor -> semiconductor device. The S08 family is widely adopted in industrial and automotive subsystems where deterministic real-time response and on-chip analog integration outweigh raw compute throughput. Key features of the MC9S08AW32VFUE include 32KB of Flash program memory, 2KB of RAM, an internal clock synthesizer supporting bus rates up to 20 MHz, an integrated 10-bit ADC with up to 12 input channels, multiple PWM-capable timers, an SPI module, two SCI (UART) modules, and an I2C module. Operation from 2.7V to 5.5V supply allows direct compatibility with both 3.3V and 5V systems. The S08 core uses a Harvard-style instruction pipeline and supports background debug mode (BDM) via a single-wire interface, enabling in-circuit programming and non-intrusive debug. The peripheral set includes a real-time counter (RTC), a computer operating properly (COP) watchdog, low-voltage detect (LVD) with reset, and multiple general-purpose I/O ports. The Flash controller supports in-application reprogramming with built-in security for code protection. Typical applications include industrial control, automotive body and chassis modules, consumer appliances, sensor signal conditioning, and motor control (PWM-driven). The integrated ADC and timers make it suitable for closed-loop temperature, pressure, and flow regulation. When designing with this MCU, allocate ground and supply decoupling close to every VDD/VSS pair (typically 100 nF + bulk capacitor) and keep the BDM pin accessible for production programming. For automotive deployments, observe NXP's EMC and ESD guidelines for body electronics. This page synthesizes NXP S08AW family datasheet parameters, distributor pricing, drop-in alternatives within the same family, and PCB-level design notes not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ