集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MPC8247ZQMIBA - PowerQUICC II 266MHz MPU | NXP 516-PBGA
MPC8247ZQMIBA

MPC8247ZQMIBA - PowerQUICC II 266MHz MPU | NXP 516-PBGA

The NXP MPC8247ZQMIBA is a PowerQUICC II integrated communications microprocessor based on the PowerPC G2_LE core, operating at 266 MHz and housed in a 516-pin PBGA (27x27 mm) package. The device combines a high-performance 32-bit PowerPC core with the CPM (Communications Processor Module), PCI, and memory controllers designed for cost-sensitive networking and communications applications. Per the NXP product page, the MPC8247 family targets small and medium enterprise routers, VPN/firewall appliances, wireless access points, residential gateways, and industrial control systems requiring integrated communications peripherals. What is a PowerQUICC II processor? A PowerQUICC II is an integrated communications processor family from NXP (formerly Freescale) that combines a PowerPC core with a separate CPM coprocessor. The CPM offloads communications tasks such as Ethernet MAC, ATM, HDLC/SDLC, and USB handling from the main CPU, enabling high I/O throughput without burdening the core. The family occupies a tier above simple microcontrollers but below full application processors, typically deployed in mid-range networking infrastructure where deterministic peripheral performance is required. Key specifications of the MPC8247ZQMIBA include a 266 MHz core frequency, 1.5V core voltage, 3.3V I/O voltage, 0.13 micrometer HiP7 process technology, and a 516-pin plastic BGA package. The device supports 32-bit addressing, integrates dual 10/100 Ethernet MACs through the CPM, two PCI interfaces, memory controller for SDRAM and ROM/Flash, and a USB 1.1 interface. The ZQMIBA speed grade and 0 to 105C operating temperature range make it suitable for industrial and commercial networking equipment. The architecture separates time-critical I/O from general-purpose processing: the PowerPC core runs application and control-plane code while the CPM handles DMA-driven peripheral protocols. This dual-engine design delivers an ideal combination of price, performance, and low-power operation for routers and gateways. The integrated PCI bridge allows direct connection to PHY devices, encryption accelerators, or companion ASICs without an external bridge chip. Typical applications include small/medium enterprise routers, VPN and firewall gateways, wireless access points, residential gateways, industrial Ethernet switches, and serial-to-Ethernet protocol converters. The ZQMIBA temperature grade (0 to 105C) covers commercial and lightly industrial deployments rather than fully extended industrial (-40 to +85C) or automotive (-40 to +125C) ranges. Design consideration: the 516-pin PBGA package requires careful PCB stackup planning. Four or six PCB layers with dedicated power planes are recommended to maintain signal integrity on the 32-bit memory bus and PCI interfaces at full speed. Decoupling must follow the NXP reference design with bulk capacitors on each voltage rail adjacent to the BGA. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Specifications below are sourced from the NXP product page, distributor listings (DigiKey, Mouser, Arrow), and the Freescale/NXP MPC8247 datasheet family.

見積もり お問い合わせ
MPC8247ZQTIEA - PowerQUICC II 400MHz MPU | NXP | 516-FPBGA
MPC8247ZQTIEA

MPC8247ZQTIEA - PowerQUICC II 400MHz MPU | NXP | 516-FPBGA

The NXP MPC8247ZQTIEA is a PowerPC G2_LE communications processor (PowerQUICC II family) integrating a 32-bit PowerPC 603e core running at 400 MHz, the CPM (Communications Processor Module), and on-chip PCI/USB/Ethernet peripherals in a 516-ball FPBGA (27x27 mm) package. Operating from a 1.5 V core supply with 3.3 V I/O, it targets embedded networking and telecom equipment that need deterministic data-plane throughput without an external protocol engine. A PowerQUICC II processor is a highly integrated MPU that combines a general-purpose PowerPC core with a hardware communications processor module (CPM). The CPM executes serial protocols (Ethernet, ATM, HDLC, UART, I2C, SPI) via microcode-driven SCCs and FCCs, offloading the core and enabling simultaneous line-rate traffic on multiple ports. In the system hierarchy this places the MPC8247ZQTIEA above standalone MCUs (because it integrates DMA, PCI, and multi-channel serial logic) yet below high-end PowerQUICC III and QorIQ devices, which add gigabit Ethernet and faster cores. The architecture is well documented in the MPC8272 PowerQUICC II Family Hardware Specifications reference manual. Key features include a 32-bit PowerPC 603e core at 400 MHz, an integrated CPM supporting Fast Ethernet MAC, USB 1.1, PCI 2.2 host/agent, HDLC/ATM, and DDR/memory controller. The device is offered in the extended temperature grade (suffix "T") and is a RoHS-incompatible (non-green) HiP7 process member of the PowerQUICC II family. Typical applications include industrial routers, DSLAM line cards, customer-premises equipment (CPE), VoIP gateways, network printers, and embedded telecom control boards. The combination of PCI, Ethernet, USB and synchronous serial interfaces eliminates several companion chips and reduces board area in cost-sensitive designs. When designing with the MPC8247ZQTIEA, the 27x27 mm FPBGA requires a multilayer PCB with controlled-impedance routing for the DDR memory bus and matched-length PCI/USB pairs. The "Z" suffix denotes the original 1.5 V core, while later "VR" revisions switched to 1.4 V; designers porting from Z to VR silicon must re-validate their power tree and timing budgets.

見積もり お問い合わせ
MPC8248CVRMIBA - PowerQUICC II 266MHz MPU, 516-PBGA | NXP
MPC8248CVRMIBA

MPC8248CVRMIBA - PowerQUICC II 266MHz MPU, 516-PBGA | NXP

The NXP MPC8248CVRMIBA is a PowerQUICC II integrated communications processor featuring a 32-bit Power Architecture core running at 266 MHz with 505.4 MIPS throughput, housed in a 516-ball PBGA (27x27 mm) package. It integrates a communications processor module (CPM), PCI interface, USB, SEC security engine, and Talitos crypto accelerator for cost-sensitive networking and communications equipment. An integrated communications processor (also called PowerQUICC) is a system-on-chip that combines a general-purpose microprocessor core with dedicated communications peripherals. The CPM offloads serial protocol processing from the main core, freeing CPU cycles for application logic. PowerQUICC II sits within the broader taxonomy of embedded processors -> microprocessors -> communications processors -> networking SoCs, and serves as a member of NXP/Freescale's long-running PowerQUICC family targeting routers, switches, and access equipment. Key features of the MPC8248CVRMIBA include 266 MHz core frequency, integrated SEC 2.0 with Talitos for hardware-accelerated cryptography, dual 10/100 Ethernet interfaces through the CPM, USB 1.1 host/device support, PCI 2.2 interface, and an industrial -40C to +105C temperature range. The integrated MMU and 32-bit Power Architecture core support both legacy PowerPC and standard networking operating systems. This part is fabricated on a 0.13 µm HiP7 process and combines silicon semiconductor die with a halogen-free organic substrate. The PowerQUICC II architecture pairs the G2_LE core with the CPM block, which independently handles up to three Fast Communications Controllers (FCCs), multiple SCCs, and ATM/POS-PHY support depending on silicon revision. Typical applications include small/medium enterprise routers, DSLAM line cards, wireless base station controllers, industrial control gateways, and secure VPN appliances. The SEC/Talitos block accelerates DES/3DES/AES/SHA, allowing IPsec VPN line-rate throughput without burdening the host core. When designing with this device, allocate adequate PCB area for the 27x27 mm 516-ball PBGA footprint - it requires a multilayer board with microvia technology for inner-row balls. Plan thermal dissipation carefully; at typical 0.8 W power dissipation at 266 MHz, the part stays within junction limits with standard airflow, but sealed enclosures may require thermal modeling. This page synthesizes distributor pricing, EOL replacement guidance, drop-in alternatives, and engineering design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8248CVRMIBA557 - PowerQUICC II 266MHz MPU | NXP | 516-PBGA
MPC8248CVRMIBA557

MPC8248CVRMIBA557 - PowerQUICC II 266MHz MPU | NXP | 516-PBGA

The NXP Semiconductors MPC8248CVRMIBA557 is a PowerQUICC II family integrated communications processor built on the PowerPC G2_LE core, delivering 266 MHz performance in a 516-pin PBGA (27x27) package. As a member of the MPC82xx PowerQUICC II family, it integrates a high-performance 32-bit PowerPC core with a system interface unit and communications peripherals targeting embedded networking and telecommunications infrastructure. A PowerQUICC II processor is a type of integrated communications microprocessor that combines a PowerPC CPU core with dedicated communications engine logic on a single die, enabling simultaneous general-purpose processing and high-bandwidth serial protocol handling. In the broader system hierarchy, the MPC8248 sits at the intersection of microprocessor, system-on-chip, and communications controller, commonly used in networking line cards, telecom adapters, and industrial control platforms where deterministic processing and fast peripheral access are required. Key features include the PowerPC G2_LE core at 266 MHz, a 32-bit architecture with MMU and integrated FPU, dual 10/100 Mbps Ethernet MACs, multiple DMA channels, dual I2C interfaces, and a memory controller supporting SDRAM, ROM/Flash, and PCMCIA peripherals. The 516-PBGA package provides 516 balls on a 27x27 mm body, exposing the full range of address, data, and peripheral interfaces while supporting industrial temperature operation. The MPC8248 architecture integrates the G2_LE core with a 32-bit 60x-compatible bus and dedicated CPM (Communications Processor Module) offload engines. This split architecture allows communication-intensive tasks such as HDLC, ATM, and Ethernet framing to be handled by hardware, freeing the core for application and routing code. Compared to discrete CPU-plus-comm-controller solutions, the integrated CPM significantly reduces board complexity. Typical applications include telecommunications line cards, industrial routers, network switches, DSLAM line cards, and legacy industrial control systems with serial peripheral requirements. The 266 MHz core and integrated dual Ethernet MACs make it well suited to mid-range networking equipment where deterministic throughput and PowerPC software ecosystem support are priorities. When designing with this device, ensure proper power decoupling and thermal management. The 27x27 mm PBGA package requires 8-layer or more PCB stack-up for signal integrity, and the 1.8V/2.5V/3.3V multi-rail supply scheme must use sequenced power-up per the manufacturer reference design to avoid bus contention. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, including 516-pin PBGA layout guidance and CPM offload engine integration patterns for legacy PowerPC systems.

見積もり お問い合わせ
MPC8248CVRPIEA - PowerQUICC II 300MHz MPU, 516-PBGA | NXP
MPC8248CVRPIEA

MPC8248CVRPIEA - PowerQUICC II 300MHz MPU, 516-PBGA | NXP

The NXP Semiconductors MPC8248CVRPIEA is a PowerQUICC II integrated communications processor featuring a 32-bit Power Architecture core running at 300 MHz, integrated in a 516-pin PBGA (27x27 mm) package and rated for the industrial -40C to +105C temperature range. As a member of the MPC82xx family, it combines a G2_LE core with a Communications Processor Module (CPM), PCI bridge, USB interface, Security Engine, and dual Fast Ethernet MACs on a single die fabricated in 0.13 um HiP7 CMOS. An integrated communications processor (sometimes called a comms processor or network SoC) is a system-on-chip that combines a general-purpose CPU core with dedicated peripheral engines for I/O, security, and packet handling. These parts sit in the hierarchy: communications processor -> application-specific MPU -> microprocessor unit (MPU) -> integrated circuit -> semiconductor. They target cost-sensitive networking equipment where deterministic I/O and integrated peripherals reduce BOM cost. Key features include dual 10/100 Mbps Ethernet MACs with MII/RMII interfaces, a 64-bit PCI bridge operating up to 66 MHz, a USB 1.1 host/slave controller, an integrated Security Engine (SEC) for DES/3DES/AES/SHA acceleration, a CPM with four serial communications controllers (SCCs), two serial peripheral interfaces, and an I2C interface. The device also supports up to 2 GB of DDR memory via its 64-bit memory controller. Architecturally, the MPC8248CVRPIEA combines the G2_LE integer pipeline with the CPM coprocessor, offloading DMA-driven serial and packet work from the core. The SEC block handles cryptographic acceleration independently, freeing CPU cycles for protocol stacks. This heterogeneous design enables line-rate performance on T1/E1, Fast Ethernet, and basic DSLAM applications without an external coprocessor. Typical applications include small-to-medium enterprise routers, integrated access devices, DSLAM line cards, industrial gateways, and legacy PCI-based communications backplanes. NXP's PowerQUICC II family is widely deployed in telecom access networks and industrial control systems requiring deterministic serial I/O and integrated security. When designing with this part, pay particular attention to power sequencing of the 1.5V and 3.3V rails, DDR memory trace length matching, and PCI bus termination. The PBGA-516 package requires careful thermal management via thermal vias under the exposed die, and the SE (security engine) requires proper key provisioning for cryptographic functions. This page synthesizes NXP distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, sourced from DigiKey, Mouser, and Octopart as of 2026-10-17.

見積もり お問い合わせ
MPC8248CVRTIEA - PowerQUICC II 400MHz 760MIPS MPU | NXP
MPC8248CVRTIEA

MPC8248CVRTIEA - PowerQUICC II 400MHz 760MIPS MPU | NXP

The NXP MPC8248CVRTIEA is a PowerQUICC II integrated communications processor featuring a 32-bit PowerPC G2_LE core running at 400 MHz with 760 MIPS throughput, packaged in a 516-ball PBGA (27x27 mm). This Power Architecture microprocessor integrates system logic, memory controllers, and a CPM (Communications Processor Module) for high-bandwidth networking and telecom workloads. A PowerQUICC II processor is a 32-bit integrated communications processor that combines a PowerPC core with a dedicated communications processor module, designed for routers, switches, and embedded systems. The PowerQUICC II family sits within the broader hierarchy of PowerPC microprocessors -> RISC microprocessors -> embedded microprocessors -> system-on-chip processors, originally pioneered by Motorola and continued by Freescale and NXP. PowerQUICC II extended the original PowerQUICC architecture with deeper pipelines (G2_LE core) and integrated security engines, enabling line-rate encryption for VPN, IPSec, and secure VoIP gateways. Key features of the MPC8248 include a CPU core operating at 400 MHz (760 MIPS at 2.0 V core), a 100 MHz system bus with 64-bit data width, integrated DDR memory controller, PCI interface, Fast Ethernet MAC, and a flexible CPM with multiple serial protocols. The 'VRTIEA' suffix denotes a 400 MHz CPU speed grade, operating temperature range of -40C to +85C (industrial), and HiP7 0.13-micron process. Hardware security acceleration is provided through the integrated SEC (Security Engine) supporting DES, 3DES, AES, and SHA algorithms, making it suitable for VPN and secure routing. Architecturally, the MPC8248 employs separate instruction and data MMU units with 32-entry TLBs, dual on-chip 16K/16K Level-1 caches, and a high-bandwidth 60x bus interface. The CPM offloads serial communication handling (up to 3 fast Ethernet ports, HDLC/PPP, ATM, USB, I2C, SPI) from the core, freeing the PowerPC for routing, QoS, and security tasks. The integrated security engine accelerates cryptographic operations in hardware, an early example of dedicated crypto silicon in embedded networking processors. Typical applications include small/medium enterprise routers, VPN gateways, DSLAM line cards, industrial Ethernet switches, and secure communications equipment. Designers choose the MPC8248 when deterministic wire-speed throughput, integrated security, and a mature PowerPC toolchain matter more than raw single-thread performance. When designing with this part, ensure proper PowerQUICC II reference board schematics are followed for the 60x bus termination and DDR clock distribution; the 27x27 mm PBGA requires 8-layer PCB with controlled impedance. Engineering samples and reference designs from the Freescale/NXP PowerQUICC II BSP accelerate bring-up. This page synthesizes distributor pricing from DigiKey and Mouser, PowerQUICC II family pin-compatible alternatives, and practical design notes not found on a single manufacturer or distributor page.

見積もり お問い合わせ
MPC8248CZQMIBA - PowerQUICC II 32-Bit 266MHz MPU | NXP
MPC8248CZQMIBA

MPC8248CZQMIBA - PowerQUICC II 32-Bit 266MHz MPU | NXP

The NXP MPC8248CZQMIBA is a PowerQUICC II family integrated communications processor built on Power Architecture technology, delivering a 32-bit core at 266 MHz in a 516-pin PBGA (27x27 mm) package. It is part of the MPC8248/MPC8247/MPC8271/MPC8272 silicon family that integrates a Power Architecture core with the CPM (Communications Processor Module) and on-chip peripherals for networking and communications equipment. The ZQ speed grade designation specifies 266 MHz core / 133 MHz bus, and the MIBA temperature grade designates industrial -40C to +85C operation. A PowerQUICC II processor is a specialized microprocessor that combines a general-purpose Power Architecture CPU core with dedicated communications hardware on the same die. In the system hierarchy, this places the MPC8248CZQMIBA between a general-purpose MPU/microcontroller and an ASSP/communications controller, serving as a high-integration building block for routers, switches, DSLAMs, and wireless base-station line cards. The integrated CPM offloads DMA, HDLC, ATM, Ethernet, and USB handling from the core, which is why PowerQUICC II parts remained dominant in networking OEMs for more than a decade. Key features of the MPC8248CZQMIBA include the 32-bit PowerPC G2_LE core with MMU and separate instruction/data caches, the CPM supporting dual 10/100 Ethernet MACs via FCC/FEC, dual UTOPIA/PCI interfaces, USB 1.1, and I2C/SPI. Integrated security is provided by the SEC engine with DES/3DES/AES/SHA-1 accelerators plus a public-key accelerator. The 516-PBGA package offers ample pin budget for the parallel system bus, DDR memory controller, PCI, and dedicated communications I/O. Architecturally, the device is implemented in a 0.13-micron (HiP7) CMOS process, which is the same process node used across the MPC8247/MPC8248/MPC8271/MPC8272 family members. The core runs at 266 MHz with the 60x bus operating at 133 MHz, and on-chip PLL generates the internal clocks from an external reference. The DDR memory controller supports PC2100/PC1600 SDRAM, while the local bus controller glues to Flash, EPROM, and other peripherals with up to eight chip selects. Typical applications include small/medium enterprise routers, integrated access devices, DSLAM line cards, wireless base-station controllers, and industrial control with security. The SEC engine acceleration is the reason this part is specified where IPSec/SRTP processing is required at line rate. The 516-PBGA package requires multi-layer PCB design with controlled-impedance traces for the parallel bus. When designing with this part, pay close attention to power sequencing (the VDD pins must come up in the correct order per the datasheet) and to the 60x bus termination. Because the part is at end of life per the NXP PCN, plan last-time-buy orders and validate second-source availability before committing to a new design. This page synthesizes distributor stock, NXP PCN/EOL status, drop-in alternative candidates, and design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8248CZQTIEA - PowerQUICC II 400MHz MPU | NXP | Networking
MPC8248CZQTIEA

MPC8248CZQTIEA - PowerQUICC II 400MHz MPU | NXP | Networking

The NXP MPC8248CZQTIEA is a PowerQUICC II integrated communications processor built on Power Architecture technology, with a 32-bit PowerPC G2_LE core running at 400 MHz and housed in a 516-pin PBGA (27x27 mm) package. It integrates a 603e-class core with memory management, dual 10/100/1000 Ethernet MACs, and security acceleration, targeting cost-sensitive networking and communications equipment. A PowerQUICC II processor is a type of integrated communications microprocessor that combines a high-performance CPU core with dedicated communications peripherals on a single die. It belongs to the broader family of embedded microprocessors (MPU), which sit one tier above microcontrollers (MCU) in the system hierarchy: MPU -> microprocessor -> processor IC -> semiconductor. PowerQUICC II is specifically optimized for routing, switching, and secure networking applications, offering an integrated alternative to discrete CPU-plus-comm-controller designs. Key features include an integrated security engine (SEC) supporting DES, 3DES, AES, and public-key algorithms; dual Fast Ethernet / Gigabit Ethernet controllers; a 64-bit DDR memory controller; PCI and PCI-X bridge support; and CPM (Communications Processor Module) with multiple FCCs, MCCs, SCCs, and serial channels. The device operates from a 1.5 V core / 3.3 V I/O supply and supports industrial temperature ranges. Architecturally, the MPC8248 combines an e603e core with the classic PowerQUICC CPM, providing hardware offload of low-level communications tasks. Built on a 0.13 µm HiP7 process, it delivers strong performance-per-watt while maintaining software compatibility with the broader PowerQUICC II family (MPC8247, MPC8271, MPC8272), enabling reuse of mature firmware stacks. Typical applications include small-to-medium enterprise routers, secure VPN gateways, DSLAM line cards, industrial Ethernet switches, and wireless LAN access controllers. Its integrated security engine makes it particularly well suited for IPsec/SSL acceleration in SOHO and SME networking equipment. When designing with this BGA-516 part, allocate a 4-layer PCB minimum, follow NXP's BGA escape routing guidelines, and provide adequate thermal relief. The integrated CPM requires a coherent DMA map; ensure the OS or firmware uses cache-coherent APIs to leverage the hardware offload. This page synthesizes NXP datasheet values, drop-in same-family alternatives, and lifecycle status drawn from NXP's product change notice system, providing actionable engineering context not present in the standalone datasheet PDF.

見積もり お問い合わせ
MPC8248VRMIBA - PowerQUICC II 266MHz 32-Bit MPU | NXP
MPC8248VRMIBA

MPC8248VRMIBA - PowerQUICC II 266MHz 32-Bit MPU | NXP

The NXP MPC8248VRMIBA is a PowerQUICC II integrated communications processor combining a 266 MHz PowerPC G2_LE core with the CPM (Communications Processor Module), SEC (Security Engine), PCI, USB, and memory controllers on a single die. Packaged in a 516-ball TEPBGA (27x27 mm), the device delivers up to 505.4 MIPS while integrating peripherals that historically required companion chipsets. The part is built on a 0.13 µm HiP7 process and operates from a 1.5 V core / 3.3 V I/O supply. According to the NXP product page, this part has been transitioned to End of Life status. A microprocessor (MPU) is a single-chip CPU optimized for embedded control and data-plane tasks, distinct from a microcontroller (MCU) by typically lacking on-chip flash and offering higher external memory throughput. The MPC82xx PowerQUICC II family sits in the taxonomy: PowerPC core -> embedded MPU -> communications processor -> networking SoC. It targets routers, DSLAM line cards, RAID controllers, and industrial control where deterministic serial-protocol handling matters more than raw application-processor performance. Key features include a 32-bit Power Architecture core with separate 16 KB instruction and data caches, dual 10/100/1000 Mbps Ethernet MAC support via the CPM, two USB 1.1 hosts (some derivatives), a 64-bit PCI interface, integrated SEC 2.0 crypto acceleration, and DRAM/SDRAM controller supporting up to 1 GB of addressable memory. The CPM offloads RISC-based serial protocols (HDLC, UART, SPI, I2C, ATM) from the main core, which is the architectural advantage of the PowerQUICC line versus a generic PowerPC. Typical applications include SMB routers, residential gateways, frame-relay and ATM access multiplexers, RAID storage controllers, and industrial serial-protocol bridges. The 0 to 105 °C operating range suits both environmentally controlled enclosures and outdoor telecom cabinets. Where higher throughput is needed, NXP positions the PowerQUICC III MPC8560 family as the upward migration path; the lower-cost MPC8247 is the trimmed sibling for less demanding designs. When designing with this part, allocate sufficient PCB area for the 27x27 mm BGA with full ball array fanout; ensure 4-layer or better stack-up to maintain SI on the 64-bit PCI and DDR memory buses. Confirm replacement options against current NXP product-change notices before committing to new production.

見積もり お問い合わせ
MPC8248VRPIEA - PowerPC G2_LE 300MHz MPU | NXP PowerQUICC II
MPC8248VRPIEA

MPC8248VRPIEA - PowerPC G2_LE 300MHz MPU | NXP PowerQUICC II

The NXP (formerly Freescale) MPC8248VRPIEA is a PowerPC G2_LE microprocessor in the PowerQUICC II family, integrating a 32-bit Power Architecture core running at 300 MHz with a 516-ball Plastic Ball Grid Array (TEPBGA, 27x27 mm) package. Built on a 0.13-µm process, it combines the G2_LE host processor with a CPM (Communications Processor Module) that offloads communications tasks, plus an integrated SEC (Security Engine) for hardware-accelerated cryptography. The part operates from a 3.3 V core/IO supply and is specified over a 0 °C to +105 °C case temperature range, making it suitable for thermally constrained networking equipment. A PowerQUICC II processor is a system-on-chip for cost-sensitive networking and communications equipment. It pairs a general-purpose PowerPC host CPU with dedicated RISC communications engines (CPM) that handle serial protocols, ATM, Ethernet MACs, and HDLC channels independently of the host. Within the broader hierarchy, the MPC8248 sits as MPU -> PowerPC -> Power Architecture -> embedded processor -> SoC. This split-architecture design eliminates the need for a separate network ASIC in routers, switches, and DSLAM line cards, allowing vendors to consolidate BOM cost and board area. Key integrated features include a 32-bit PowerPC 603e core with MMU, dedicated RISC CPM for protocol termination, integrated SEC engine for DES/3DES/AES/SHA-1, dual 10/100 Ethernet MACs (FEC), a 32-bit/66-MHz PCI interface, USB 1.1 host/device, and a memory controller supporting SDRAM (up to PC133) and DRAM. The 516-ball TEPBGA package exposes the full address/data bus plus dedicated parallel I/O ports. Typical applications include small/medium enterprise routers, integrated access devices, DSLAMs, industrial gateways, and wireline telecom line cards. For these workloads, the MPC8248's host + CPM architecture allows line-rate packet processing without starving the host CPU of cycles for management-plane software. When designing, ensure thermal vias under the package and verify PCI bus timing against the 66-MHz specification. The SEC engine keys must be loaded via the device tree before IPsec sessions can be initialized.

見積もり お問い合わせ
MPC8248VRTIEA - PowerQUICC II 400MHz MPU | NXP 516-PBGA
MPC8248VRTIEA

MPC8248VRTIEA - PowerQUICC II 400MHz MPU | NXP 516-PBGA

The NXP MPC8248VRTIEA is a PowerPC G2_LE microprocessor from the PowerQUICC II family integrating a 32-bit Power Architecture core that runs up to 400MHz inside a 516-pin PBGA package measuring 27mm x 27mm. It combines a high-integration communications processor with on-chip PCI, USB, CPM (Communications Processor Module), and SEC (Security Engine) blocks, and is supplied at 1.5V core voltage with industrial-grade 0 to 105C operating temperature. The device is positioned as a cost-optimized variant of the broader MPC8247/MPC8248/MPC8271/MPC8272 family, sharing the same die and most peripheral blocks with its siblings. A PowerQUICC II communications processor is a type of embedded microprocessor that integrates a CPU core with dedicated networking and cryptographic peripherals, allowing networking equipment such as routers, switches, and DSLAMs to handle packet processing and encryption offload without companion ASICs. It belongs to the broader embedded microprocessor family, itself a sub-category of integrated circuits; the PowerQUICC lineage traces back to the Freescale MPC8xx PowerQUICC and PowerQUICC III successors, and represents a well-known architectural choice for telecom/datacom OEMs. Key features of this part include a single 32-bit PowerPC G2_LE core running at 400MHz, hardware PCI interface, USB controller, dual 10/100 Ethernet via CPM, and an integrated SEC engine for DES/3DES/AES acceleration. The part is fabricated in a 0.13um HiP7 process and supports 60x bus up to 133MHz, plus DDR memory controller, dual UART, I2C, and SPI channels. The 516-PBGA footprint remains identical across the MPC8247/MPC8248/MPC8271/MPC8272 variants, enabling straightforward board reuse when scaling design requirements. Architecturally, the MPC8248VRTIEA uses the G2_LE core (low-power variant of the classic G2) which incorporates a hardware MMU, separate instruction and data caches, and supports power-management modes that allow dynamic frequency and voltage scaling. The CPM operates semi-independently from the core via dedicated DMA, offloading table-walks, HDLC framing, and ATM SAR work from the CPU. The SEC block provides hardware-accelerated crypto, and the PCI/USB blocks share the same 60x local bus for register access. Typical applications include entry-level to mid-range routers and switches, integrated access devices, DSLAM line cards, industrial control gateways, and secure networking appliances that need on-chip encryption. The wide peripheral integration reduces BOM cost and PCB area compared to designs using a discrete MPU plus companion communication controller. When designing with the MPC8248VRTIEA, ensure the 1.5V core rail is generated by a low-noise LDO or buck converter with at least 1.5A capability to absorb peak current draw during CPM bursts. Use the manufacturer's reference schematics as a starting point for DDR memory routing and impedance matching. This part is now in NXP's discontinuance and replacement program, so check NXP's product change notice for last-time-buy and recommended successor information before starting new designs. This page synthesizes NXP-end-of-life notice data, distributor inventory, parametric comparisons against MPC8248 same-family variants, and practical design notes that go beyond what is available in the public datasheet or distributor listing alone.

見積もり お問い合わせ
MPC8248ZQMIBA - PowerQUICC II 266MHz MPU | NXP 516-PBGA
MPC8248ZQMIBA

MPC8248ZQMIBA - PowerQUICC II 266MHz MPU | NXP 516-PBGA

The NXP MPC8248ZQMIBA is a PowerQUICC II integrated communications processor from the MPC82xx family, featuring a 32-bit PowerPC G2_LE core (603e-class) clocked at 266 MHz, delivered in a 516-ball plastic BGA (PBGA, 27x27 mm) package. Built on a 0.13 µm HiP7 process, this MPU integrates a 32-bit Power Architecture execution core with a peripheral subsystem for embedded networking and communications. An MPU (Microprocessor Unit) is a processor IC that contains a full CPU core plus on-die peripherals, MMU/FPU support, and memory controllers. The MPC8248 belongs to the broader hierarchy: MPU -> microprocessor -> processor -> integrated circuit -> semiconductor. PowerQUICC II parts were purpose-built for routers, DSLAM line cards, and industrial control, combining general-purpose PowerPC processing with on-chip communications engines. Key features include a 266 MHz maximum CPU clock, 32-bit data bus, dual I2C and dual UART interfaces, DMA, timers, memory controller, and PCI bridge. The part supports 3.3V I/O operation and offers industrial temperature grade capability. Per NXP, the device integrates a 603e core with hardware MMU and a high-bandwidth internal bus for system memory and peripheral traffic. The architecture pairs the 603e core with a CPM (Communications Processor Module) that offloads serial protocols from the CPU, making the part effective for routing/bridging, IDE/ATA, Fast Ethernet MACs, and HDLC/PPP termination. The 516-PBGA footprint and 0.13 µm process deliver a balanced cost/performance point for high-integration embedded designs. Typical applications include wired communications line cards, enterprise router/switch control planes, IDE/storage controllers, and industrial automation. The integrated CPM reduces external glue logic and BOM cost in multi-protocol systems. When designing, plan PCB layout for the 1.27 mm-pitch BGA with matched-length high-speed traces, respect power-up sequencing of the 3.3V rails, and follow NXP application notes for the on-chip DDR/SDRAM controller. Per NXP, this part is approaching end-of-life, so consider NXP's recommended replacements for new designs.

見積もり お問い合わせ
MPC8248ZQTIEA - 400MHz PowerQUICC II MPU, 516-PBGA | NXP
MPC8248ZQTIEA

MPC8248ZQTIEA - 400MHz PowerQUICC II MPU, 516-PBGA | NXP

The NXP MPC8248ZQTIEA is a PowerQUICC II family microprocessor based on the PowerPC G2_LE core, integrating a 32-bit CPU core running at 400 MHz with a high-performance system interface and communications processor module. It is housed in a 516-pin Plastic Ball Grid Array (PBGA) measuring 27 mm x 27 mm, offering high integration for embedded networking and communications applications. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, typically combining the CPU core, cache, memory controller, and peripheral interfaces on a single die. Within the system hierarchy, an MPU sits at the top of the compute stack above microcontrollers (MCUs), and is itself a subset of the broader category of processors and semiconductors. The MPC8248 specifically belongs to the PowerQUICC II communications-processor family, which NXP positions between general-purpose MCUs and high-end CPUs by adding integrated networking peripherals. Key features include a 32-bit PowerPC G2_LE core, on-chip L1/L2 cache, dual 10/100 Ethernet controllers, PCI bridge, DDR memory controller, and a programmable CPM (Communications Processor Module) for serial protocol acceleration. The device supports PowerPC instruction set with 32-bit address and data paths. The architecture combines a G2_LE core with the CPM (Communications Processor Module) co-processor that handles DMA, serial, and networking peripherals in parallel with the CPU, offloading protocol processing. The 400 MHz core frequency enables real-time processing of networking and control workloads, while the integrated memory controller supports modern DDR SDRAM. The high level of on-chip integration reduces BOM count and PCB complexity versus discrete CPU + ASIC designs. Typical applications include routers, DSLAMs, network switches, industrial control systems, and embedded telecommunications equipment. The integrated CPM makes the MPC8248 particularly well suited for designs requiring multi-protocol serial interfaces (HDLC, Ethernet, UART, I2C, SPI) alongside general-purpose processing. When designing with this device, allocate sufficient PCB area for the 27 mm x 27 mm 516-pin PBGA package, ensure adequate thermal relief (the part dissipates significant power at full CPU and CPM load), and use proper signal-integrity design for the DDR and PCI interfaces. The 1.5 V core and 3.3 V I/O supply rails must be sequenced correctly per the datasheet to avoid latch-up. This page synthesizes distributor pricing, drop-in alternatives from the same PowerQUICC II family, and practical design notes that complement the official NXP hardware specifications document.

見積もり お問い合わせ
MPC8250ACZQIHBC - PowerQUICC II MPU 200MHz 516-PBGA | NXP
MPC8250ACZQIHBC

MPC8250ACZQIHBC - PowerQUICC II MPU 200MHz 516-PBGA | NXP

The NXP MPC8250ACZQIHBC is a PowerPC G2-based PowerQUICC II integrated communications microprocessor with a 32-bit core running at 200 MHz, housed in a 516-pin Plastic BGA (TEPBGA) package measuring 27 x 27 mm with 1 mm pitch. The part integrates a high-performance PowerPC 603e core with a CPM (Communications Processor Module) for networking peripherals, manufactured on a 0.25 um CMOS process and supplied at 3.3 V core logic with a separate 1.8 V supply. Background: An MPU (Microprocessor Unit) is the central computational engine of an embedded system, supervising instruction fetch, ALU operations, address generation, and interrupt handling. The MPC82xx PowerQUICC II family is a hierarchy of integrated communications processors - combining an MPU with dedicated communications silicon on a single die. In the taxonomy of processors, the MPC8250ACZQIHBC sits within PowerPC -> RISC microprocessor -> embedded MPU -> communications processor. Its dual-architecture (CPU + CPM) is purpose-built for high-end telecom and datacom applications where deterministic peripheral handling is required alongside general-purpose compute. Key features include the 200 MHz PowerPC 603e core, a separate RISC-based CPM for communications offload, 32 KB instruction cache and 32 KB data cache, integrated DDR memory controller support, 64-bit data bus width, and an integrated PCI bridge. The 516-PBGA (TEPBGA) package provides high I/O density for the multi-bank memory and peripheral interfaces while enabling SMT manufacturing. The device operates over the industrial temperature range and includes power-saving modes managed through the CPM. Technical depth: The CPM offloads HDLC, UART, I2C, and ATM SAR processing from the CPU, allowing deterministic handling of multiple T1/E1 channels. The 603e core is a superscalar design with out-of-order execution, branch prediction, and hardware MMU for virtual memory. Memory controller supports SDRAM at 66 MHz bus frequency with ECC for reliability. The PCI bridge operates at up to 66 MHz, allowing direct connection to peripheral devices without external glue logic. Typical applications include high-end routers, DSLAM line cards, telecom switching equipment, industrial control with networking, and embedded datacom systems. The integrated CPM makes the device particularly well suited to WAN access equipment that must terminate multiple serial protocols alongside IP packet processing. When designing with the MPC8250ACZQIHBC, ensure proper decoupling of both 3.3 V and 1.8 V rails, attention to trace length matching for the DDR memory bus, and adequate thermal relief given the BGA substrate. The TEPBGA package requires X-ray inspection of solder joints during prototyping. This page synthesizes cross-referenced parametric data, lifecycle status, and drop-in alternative guidance not consolidated in any single manufacturer or distributor page.

見積もり お問い合わせ
MPC8250ACZUMHBC - PowerPC G2 MPU 266MHz 480-TBGA | NXP
MPC8250ACZUMHBC

MPC8250ACZUMHBC - PowerPC G2 MPU 266MHz 480-TBGA | NXP

The NXP MPC8250ACZUMHBC is a PowerPC G2 microprocessor (MPU) in the PowerQUICC II family, integrating a single 32-bit PowerPC core with a separate RISC Communications Processor Module (CPM) for high-performance networking and telecom workloads. It runs at 266 MHz on a 0.25-micron process and is packaged in a 480-pin TBGA measuring 37.5 x 37.5 mm, supplied via 3.3 V I/O with an internal 1.8 V core rail. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes instructions from external memory; it is the central processing unit of an embedded system. The PowerQUICC II architecture sits within the broader taxonomy: MPU -> embedded processor -> 32-bit processor -> communications processor -> PowerPC architecture -> NXP/Freescale PowerQUICC family. MPC82xx devices specifically combine a PowerPC host core with a CPM optimized for ATM, HDLC, Ethernet, and other serial protocols. Key features include a 32-bit PowerPC G2 core, a 64-bit external data bus, integrated DRAM/SDRAM memory controller, dedicated CPM for communications, 266 MHz core frequency, and 3.3 V I/O with 1.8 V core. The integrated CPM offloads protocol processing from the host CPU, enabling wire-speed handling of multiple WAN/LAN interfaces simultaneously without burdening the PowerPC core. From an architecture standpoint, the MPC8250 uses a dual-processor paradigm: the PowerPC G2 core handles the OS, control plane, and general-purpose code, while the CPM uses microcoded RISC engines to terminate serial channels. This split lets designers implement routers, DSLAMs, and base-station equipment with deterministic throughput. Per the manufacturer datasheet, the device supports multiple boot and endianness configurations, JTAG boundary scan, and a wide range of memory and peripheral interfaces including PCI and UTOPIA. Typical applications include telecom routers and DSLAMs, industrial control and factory automation, networking switches, VoIP gateways, and legacy embedded systems requiring PowerPC compatibility. The integrated CPM makes the MPC8250ACZUMHBC particularly well suited where multiple serial channels must be processed deterministically alongside general-purpose processing. When designing with this part, ensure the PCB supports the large 37.5 x 37.5 mm TBGA footprint, provide adequate decoupling for both 3.3 V and 1.8 V rails, and validate thermal performance given the BGA's thermal resistance. NXP has issued End-of-Life documentation for this part, so design teams should plan for last-time-buy windows or evaluate newer PowerQUICC II successors such as the MPC8260/MPC8270 family. This page synthesizes distributor pricing, end-of-life status, drop-in alternative options, and practical design considerations that are not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8250AVRIHBC - PowerQUICC II MPC82xx 200MHz MPU BGA-516 | NXP
MPC8250AVRIHBC

MPC8250AVRIHBC - PowerQUICC II MPC82xx 200MHz MPU BGA-516 | NXP

The NXP (formerly Freescale) MPC8250AVRIHBC is a PowerQUICC II integrated communications microprocessor built on the PowerPC G2 architecture. It integrates a 32-bit PowerPC core running at 200 MHz with a 64-bit system bus, packaged in a 516-ball PBGA measuring 27 x 27 mm with 1.0 mm pitch and 2.25 mm maximum height. The device is part of the MPC82xx family and is targeted at high-performance networking and telecom equipment where integrated communications peripherals reduce system cost and board area. A PowerQUICC (Quad Integrated Communications Controller) processor is a specialized MPU that combines a PowerPC CPU core with one or more communications processor modules (CPMs) that offload serial protocol processing from the main core. This architecture - CPU plus CPM - is a member of the broader category of communications microprocessors, which sit within the larger hierarchy of embedded microprocessors, microcontrollers, and ultimately semiconductors. PowerQUICC II devices like the MPC8250 added HiPerMOS7 process technology and dual-RISC CPM architecture compared to PowerQUICC I, delivering higher CPM throughput and lower power per MHz. Key features of the MPC8250AVRIHBC include integrated Ethernet MACs, ATM support, HDLC/SDLC controllers, a 64-bit system bus, 1.8 V core supply with 3.3 V I/O, and industrial-grade temperature operation to -40C. The 516-ball PBGA exposes full memory controller address/data buses plus dedicated CPM serial pins. The device is supplied in a lead-free plastic BGA compliant with current environmental standards. NXP and authorized distributors still ship this part as a long-life-cycle product for installed-base telecom and industrial customers, even as the broader PowerQUICC II family has transitioned to last-time-buy or obsolete status for many derivatives. Typical applications for the MPC8250AVRIHBC include multi-channel WAN routers, DSLAM line cards, frame-relay access devices, ATM switches, ISDN modem pools, industrial serial protocol concentrators, and legacy telecommunications infrastructure. The integrated CPM handles up to three fast serial communications controllers (FCC), two multi-channel controllers (MCC), four serial communications controllers (SCC), and two serial management controllers (SMC), which together allow a single MPC8250 to terminate many T1/E1 or fractional T1/E1 channels without burdening the main PowerPC core. When designing with this device, allocate generous PCB area for the 516-ball PBGA fanout and use at least 6 layers to escape the 1.0 mm pitch BGA. The core requires a clean 1.8 V rail with tight tolerance; a dedicated switching regulator with bulk ceramic decoupling near each VDD/VCC pair is recommended. For thermal management, the exposed die underneath the BGA spreads heat to the PCB, so a continuous ground plane and thermal vias directly beneath the package are essential in still-air enclosures. This page synthesizes NXP/Freescale datasheet specifications, current distributor pricing, drop-in alternative guidance, and practical design notes not found on a single manufacturer product page.

見積もり お問い合わせ
MPC8250AVVMHBC - 266MHz PowerQUICC II MPU, 480-TBGA | NXP
MPC8250AVVMHBC

MPC8250AVVMHBC - 266MHz PowerQUICC II MPU, 480-TBGA | NXP

The NXP MPC8250AVVMHBC is a 266 MHz PowerQUICC II integrated microprocessor unit (MPU) from the MPC82xx family, packaged in a 480-ball TBGA (TBGA-480) measuring 37.5 x 37.5 mm. It integrates a PowerPC G2 32-bit core with a separate RISC communications processor module (CPM), targeting telecom and networking line-card applications. The device operates from a nominal 2.0 V core supply (3.3 V I/O is typical for this family) and supports DRAM, SDRAM, and Flash memory controllers. What is a PowerQUICC II processor? PowerQUICC II is NXP's (formerly Freescale/Motorola) family of integrated communications processors that combine a PowerPC host CPU with a dedicated RISC engine specialized for protocol processing such as ATM, HDLC, Ethernet, and TDM. Architecturally it sits within the broader categories of microprocessor -> embedded processor -> communications processor, integrating CPU, memory controllers, DMA, and protocol logic on a single die to reduce board area in networking infrastructure. Key features of the MPC8250AVVMHBC include the PowerPC G2 core running up to 266 MHz, an on-chip RISC CPM for communications offload, integrated memory controllers (DRAM/SDRAM), PCI bridge support in the family, and 32-bit data path architecture. The 480-TBGA package offers high-density interconnect for the wide external bus and multiple peripheral interfaces typical of line-card designs. The MPC8250AVVMHBC employs a 0.25-micron process and uses parallel processor cooperation between the PowerPC G2 core and the CPM. The CPM runs independently at its own clock and handles 10/100 Ethernet MAC, HDLC, and TDM channels via serial interfaces, freeing the host CPU for control-plane and application tasks. Typical applications include telecom line cards, WAN routers, integrated access devices, and industrial control requiring deterministic protocol processing. The wide external memory bus and PCI support make it a fit for legacy telecom designs and embedded networking equipment. Design consideration: Thermal management on the 37.5 x 37.5 mm TBGA requires careful PCB stackup and ground/thermal via planning under the ball field, especially since the device is offered in industrial temperature grades. Always reuse the NXP reference design footprint and follow the IBIS model for signal integrity on the 32/64-bit memory bus. This page synthesizes distributor pricing, same-family drop-in alternatives, and lifecycle context that the bare datasheet does not present in one view, helping engineers shortlist substitutes for legacy or EOL builds.

見積もり お問い合わせ
MPC8250AVVPIBC - PowerQUICC II 300MHz MPU | NXP 480-TBGA
MPC8250AVVPIBC

MPC8250AVVPIBC - PowerQUICC II 300MHz MPU | NXP 480-TBGA

The NXP MPC8250AVVPIBC is a PowerQUICC II integrated communications microprocessor built on a PowerPC G2 core, integrating high-performance RISC processing with on-chip networking and communications peripherals in a 480-TBGA (37.5x37.5 mm) package. A microprocessor (MPU) is the central processing unit of an embedded computing system, executing instruction streams, managing memory, and orchestrating peripheral I/O. The PowerPC G2 architecture is a 32-bit superscalar RISC core widely used in networking and telecommunications equipment, while PowerQUICC II devices additionally integrate a Communications Processor Module (CPM) that offloads DMA, serial, and networking tasks from the CPU. The MPC82xx family, MPC8250AVVPIBC's product family, sits at the top of the PowerQUICC II hierarchy and is intended for high-end routers, switches, and access multiplexers. Key features include a 300 MHz CPU core frequency, a single PowerPC G2 core, a 32-bit data path, an integrated CPM with support for multiple fast communications controllers, an external bus supporting up to 133 MHz operation, and an industrial-grade operating temperature range. The 480-TBGA package integrates this processing and I/O density on a 37.5x37.5 mm footprint, which is the standard for the MPC82xx family. The MPC8250AVVPIBC is implemented in a 0.25 micrometer CMOS process and operates from a 3.3 V core/IO supply. Its internal architecture separates the core and CPM clock domains, allowing the CPM to continue handling serial traffic while the core changes frequency or enters low-power states. The integrated memory controller supports SDRAM, ROM/Flash, and peripheral bus interfaces, reducing external chip count in router line-card designs. Typical applications include high-end routers, DSLAM line cards, ATM and TDM switches, frame relay access devices, and industrial control platforms that require deterministic communications throughput. The combination of G2 core performance and CPM offload makes it ideal for wireline access and edge networking equipment. Designers should ensure proper thermal management on the 480-TBGA; the large body size aids heat spreading but JTAG, reset, and PLL power filtering require close attention per NXP application notes. Provide a clean 3.3 V supply and follow the recommended PLL filter network. This page synthesizes distributor pricing, same-family NXP drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MPC8250AZQIHBC - PowerQUICC II MPC82xx 200MHz MPU | NXP
MPC8250AZQIHBC

MPC8250AZQIHBC - PowerQUICC II MPC82xx 200MHz MPU | NXP

The NXP MPC8250AZQIHBC is a PowerPC G2 microprocessor from the PowerQUICC II MPC82xx family, integrating a 32-bit RISC core running at 200MHz with a 3.3V supply in a 516-pin TEPBGA package. Built on a 0.25-micron process, it targets communications infrastructure requiring tightly coupled communication peripherals and an embedded PowerPC core. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions fetched from memory and coordinating peripheral traffic. The MPC82xx family sits in the hierarchy of NXP PowerQUICC communications processors: MPU -> embedded microprocessor -> communications processor -> PowerQUICC II -> PowerPC G2 -> 32-bit RISC core -> semiconductor. This positioning makes the part especially suitable for networking, telecom, and industrial control applications where deterministic peripheral behavior matters as much as raw CPU throughput. Key differentiating features include the integrated communications processor module (CPM) with multiple FCCs (Fast Communications Controllers), MCCs, SCCs, and a 10/100 Ethernet MAC, all sharing DMA access to the host CPU. The part exposes a 32-bit PowerPC data path, 603e-class instruction set, and an external bus width of 64 bits. The 516-pin TEPBGA (Plastic Enhanced BGA) package measures 27 mm x 27 mm and provides extensive I/O and address pins for external SDRAM, Flash, and peripheral expansion. The operating temperature grade marked by the 'Z' suffix is commercial. Typical applications include routers, LAN/WAN switches, DSLAM line cards, industrial control boards, and legacy telecom backplanes. The combination of on-chip peripherals and PowerPC core reduces board area versus designs that pair a discrete CPU with an external PCI bridge. Designers migrating from earlier PowerQUICC I (MPC860) parts benefit from binary-compatible instruction sets with higher clock rates and additional peripheral channels. When designing with this part, careful attention to power sequencing and decoupling is mandatory because the MPC8250 has multiple supply rails (core and I/O). The 516-pin BGA requires X-ray inspection and controlled reflow profiles; PCB land pattern and trace routing must follow NXP application note guidelines for high-speed 60x-class buses to avoid signal integrity issues on the memory interface.

見積もり お問い合わせ
MPC8250AZUPIBC - PowerPC G2 300MHz MPU | NXP | 480-TBGA
MPC8250AZUPIBC

MPC8250AZUPIBC - PowerPC G2 300MHz MPU | NXP | 480-TBGA

The NXP MPC8250AZUPIBC is a PowerPC G2 microprocessor from the PowerQUICC II family, operating at 300 MHz on a 32-bit RISC core fabricated on a 0.25 µm CMOS process. It integrates a 32-bit PowerPC core with communications coprocessor functionality in a 480-ball TBGA (37.5 x 37.5 mm) package, with a 3.3 V I/O supply and a core voltage domain managed internally. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions, managing memory, and orchestrating peripherals. The PowerQUICC II architecture is a category of communications-oriented MPUs that pair a PowerPC execution core with on-chip peripheral subsystems - in the MPC8250AZUPIBC's case, the HIP4C (High-Performance Peripheral Interface) hardware block - giving designers a single-chip solution for routers, switches, DSLAMs, and other networking gear. This hierarchy - PowerPC core -> communications MPU -> embedded processor -> integrated circuit - lets a single silicon die replace what previously required a CPU, a peripheral controller, and an external bus bridge. Key differentiating features include the on-chip HIP4C communications engine supporting fast Ethernet, HDLC, ATM, and PCI interfaces, a 32-bit external bus interface with up to 133 MHz operation, and integrated memory controllers for SDRAM, ROM/Flash, and general-purpose peripherals. The 480-TBGA package provides a high-pin-count surface-mount solution optimized for high-speed signaling and thermal dissipation in networking line cards. Technically, the MPC8250AZUPIBC combines a 16 Kbyte instruction cache and 16 Kbyte data cache with a unified 256 Kbyte L2 cache option, MMU with hardware table-walk, and a 60x-compatible system bus. The HIP4C block offloads DMA, protocol handling, and time-division multiplexing from the core, which is the defining advantage of PowerQUICC II in wired communications applications. Typical applications include telecommunications line cards, DSLAMs, routers, multi-channel T1/E1 framers, and industrial control platforms requiring integrated communications peripherals. It is well-suited for designs that benefit from a single PowerQUICC II device replacing separate CPU, bridge, and peripheral ASICs. When designing with this part, allocate at least four PCB layers for the high-speed 60x bus, place decoupling capacitors within 5 mm of each power pin, and verify the TBGA solder joint process window; the 37.5 mm package is not rework-friendly. Confirm HIP4C peripheral pin assignments against your chosen protocol stack before committing to layout. This page synthesizes distributor pricing, drop-in alternatives from the same PowerQUICC II family, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MPC8255ACVVMHBB - PowerQUICC II 32-Bit MPU 266MHz 480-TBGA | NXP
MPC8255ACVVMHBB

MPC8255ACVVMHBB - PowerQUICC II 32-Bit MPU 266MHz 480-TBGA | NXP

The NXP MPC8255ACVVMHBB is a PowerQUICC II integrated communications microprocessor based on the PowerPC G2 core, operating at 266 MHz and housed in a 480-ball TBGA package measuring 37.5 x 37.5 mm. The part integrates a high-performance 32-bit RISC engine with the communications processor module (CPM) used throughout the PowerQUICC II family for high-end networking and telecom peripherals. According to distributor listings, the device operates from a 2 V core supply and ships in tray packaging compliant with lead-free and RoHS directives. A PowerQUICC II microprocessor is a system-on-chip that combines a PowerPC execution core with a dedicated RISC-based CPM. The CPM offloads DMA, serial, and protocol processing from the CPU, while the embedded G2 core handles control-plane code. In the broader taxonomy, MPC8255 belongs to the MPC82xx PowerQUICC II family, which sits between the simpler MPC860 PowerQUICC I and the higher-frequency MPC8260/MPC8280 derivatives. This positioning makes it a classic choice for designs that need PowerQUICC II peripherals without paying for the larger caches or additional SCCs of the MPC8260. Key features include a single PowerPC G2 core running at 266 MHz, integrated CPM with FCC, MCC, SCC, and FCC serial controllers, on-chip L1 instruction and data caches, a 64-bit 60x bus, JTAG/COP debug support, and industrial temperature grade. The 480-TBGA package offers sufficient I/O and power/ground density to support the parallel system bus plus multi-channel serial I/O without external bus switches. The 'BB' speed/designator places this part within the standard 266 MHz tier, not the higher-frequency 300 MHz 'CC' bin. The architecture implements a Harvard-style L1 cache, hardware MMU for PowerPC virtual memory, and a separate CPM RISC engine communicating with the core via dual-port RAM. Power is delivered through dedicated VDD/VCC pins that require substantial decoupling close to the BGA balls. Designers typically pair the device with SDRAM, Flash, and PHY components on a six- to eight-layer PCB, with thermal vias under the BGA thermal pad. Typical applications include industrial routers and switches, telecom line cards, T1/E1 and ATM aggregation, protocol converters, and embedded networking appliances that require deterministic CPM-driven serial I/O. The combination of proven PowerQUICC II peripheral IP and a 266 MHz core makes it especially suitable for legacy telecom designs being maintained or refreshed. When designing with this device, pay close attention to the TBGA breakout pattern: a 37.5 x 37.5 mm 480-ball package typically routes on a 0.8 mm or 1.0 mm pitch and demands microvia or HDI stack-up. Power sequencing of the 2 V core and 3.3 V I/O rails must follow the datasheet PowerQUICC II sequence to avoid latch-up. This page synthesizes distributor pricing, drop-in PowerQUICC II alternatives, and practical BGA layout notes that go beyond the manufacturer hardware specifications document.

見積もり お問い合わせ
MPC8255ACZUMHBB - PowerQUICC II HIP4, 266MHz, 480-TBGA | NXP
MPC8255ACZUMHBB

MPC8255ACZUMHBB - PowerQUICC II HIP4, 266MHz, 480-TBGA | NXP

The NXP MPC8255ACZUMHBB is a PowerQUICC II HIP4 integrated communications processor built on a PowerPC G2 core with 32-bit architecture, clocked at 266 MHz, and housed in a 480-ball T-BGA package measuring 37.5 mm x 37.5 mm with 1.27 mm ball pitch. It is designed for high-end communications and networking systems requiring tightly integrated RISC processing, on-chip peripherals, and deterministic interrupt behavior. PowerQUICC II is NXP's family of integrated communications processors (a category of microprocessors/MPUs). It evolved from the earlier MPC860 PowerQUICC line by replacing the single communications processor module (CPM) with dual CPMs and adding a high-performance PowerPC core. In the broader taxonomy, PowerQUICC II belongs to: microprocessor (MPU) -> communications processor -> networking SoC -> semiconductor. These devices target routers, switches, DSLAMs, and telecom line cards where protocol processing and control-plane tasks coexist on one die. Key features of the MPC8255ACZUMHBB include a 64-bit data bus, 1.8 V core supply, an integrated DMA controller, dual 10/100 Ethernet MACs, an ATM/POS PHY interface, USB, I2C, and a 32-bit local bus. The HIP4 (0.25 micron) silicon revision delivers the 266 MHz top frequency for this MPN family. The 480-TBGA package exposes the full peripheral set including PCI, UTOPIA, and dedicated time-slot assigners for TDM traffic. Architecturally, the device pairs a PowerPC G2 core with a separate, firmware-driven CPM that offloads serial/ATM/Ethernet work. The CPM uses RISC micro-engines programmed via microcode stored in on-chip ROM, freeing the host core from bit-banging protocols. This split-architecture delivers deterministic throughput on WAN/edge interfaces at lower MHz than comparable monolithic SoCs. Typical applications include enterprise routers, multiservice access concentrators, DSLAM line cards, and industrial control platforms. The wide peripheral mix and integrated PCI bridge make it attractive for legacy telecom designs where deterministic CPM behavior outweighs the appeal of newer Cortex-A based SoCs. When designing with the MPC8255, treat the 1.8 V core rail as the dominant thermal contributor and respect the simultaneous switching limits of the 480-ball BGA during layout. This part has been marked 'No Longer Manufactured' by NXP, so lifecycle planning and last-time-buy stock checks are essential before committing to new designs. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same 480-TBGA footprint, and a comparative parameter table across the PowerQUICC II family not found in the datasheet alone.

見積もり お問い合わせ
MPC8255AVVMHBB - PowerQUICC II 266MHz 32-Bit MPU | NXP
MPC8255AVVMHBB

MPC8255AVVMHBB - PowerQUICC II 266MHz 32-Bit MPU | NXP

The NXP MPC8255AVVMHBB is a PowerPC G2-based PowerQUICC II integrated communications processor delivering a 266 MHz 32-bit core inside a 480-ball TBGA (37.5 x 37.5 mm) package. It combines a high-performance embedded PowerPC processor with a CPM (Communications Processor Module), an integrated system interface, and networking peripherals to enable single-chip designs for routers, switches, DSLAMs, and similar telecom/datacom equipment. A PowerQUICC II processor is a member of the PowerPC G2 microprocessor family targeted at communications infrastructure. In the broader taxonomy it sits as an embedded MPU -> 32-bit microprocessor -> communications processor, where the integrated CPM offloads DMA, HDLC, ATM, Ethernet MAC, and serial channel handling from the core, freeing the CPU for higher-layer routing, signalling, and protocol processing. This integration eliminates the need for a companion ASIC and reduces both BOM cost and board area in networking line cards. Key features include a 32-bit PowerPC G2 core with 16 Kbyte instruction and 16 Kbyte data caches, a 266 MHz core-to-memory bus, an integrated 64-bit 60x-compatible system bus, and a CPM that supports fast Ethernet (MII/RMII), HDLC/SDLC, UART, I2C, SPI, and PCI interface. Memory is supported through a 32/64-bit SDRAM controller and a general-purpose chip-select machine, and the device includes dual 10/100 Ethernet MACs, a PCI interface, and a flexible interrupt controller. The MPC8255AVVMHBB is implemented in a 0.18 micrometre CMOS process and operates from a 1.8 V core supply with 3.3 V I/O. It is qualified for industrial / extended operating temperature ranges and is supplied in a 37.5 mm x 37.5 mm TBGA480 with 1.27 mm ball pitch. The 'VVM' infix in the part number indicates 266 MHz core, 133 MHz bus, and standard power/performance tier. Typical applications include enterprise routers and LAN switches, DSLAM line cards, wireless base-station controllers, industrial networking gateways, and protocol-conversion appliances where the CPM's multi-channel serial handling reduces or replaces external glue logic. When designing with this MPU, the 480-ball BGA requires 4-layer or 6-layer PCB stack-up with controlled-impedance traces on the 60x bus and SDRAM lines. Power sequencing (1.8 V core before 3.3 V I/O) and proper JTAG boundary-scan bring-up should be considered early in the layout; reference NXP application note AN2803 for PowerQUICC II hardware design guidance. This page synthesises distributor stock, drop-in same-package alternatives within the MPC82xx family, and practical hardware design notes that go beyond the brief summary on the NXP product page.

見積もり お問い合わせ
MPC8255AVVPIBB - PowerQUICC II MPU, 300 MHz, 480-TBGA | NXP
MPC8255AVVPIBB

MPC8255AVVPIBB - PowerQUICC II MPU, 300 MHz, 480-TBGA | NXP

The NXP Semiconductors (formerly Freescale) MPC8255AVVPIBB is a PowerQUICC II HIP4 communications microprocessor running at 300 MHz with one 32-bit PowerPC G2 core, integrated in a 480-ball TBGA package measuring 37.5 x 37.5 mm. The part is fabricated on NXP's HiPerMOS7 0.13-micron process technology and is positioned as a high-integration networking and communications processor for embedded router, switch and control-plane designs. A PowerQUICC II processor belongs to the hypernym chain communications processor -> embedded MPU -> microprocessor -> integrated circuit -> semiconductor. The PowerQUICC family integrates a PowerPC core with the CPM (Communications Processor Module), historically used to offload ATM, Fast Ethernet, HDLC, UART and other serial channel work from the core, enabling deterministic throughput across multiple WAN and LAN interfaces. Key features of the MPC8255AVVPIBB include the 300 MHz PowerPC 603e-class core, on-chip L1 instruction and data caches, dual 10/100 Ethernet MACs supported by the CPM, PCI interface, dual I2C controllers, and a memory controller that supports SDRAM and general-purpose bus devices. The 'V' in the part suffix indicates an extended commercial operating temperature grade and the 'PIBB' decodes as 300 MHz core frequency in a TBGA package. Technically, the silicon integrates separate RISC engine CPM cores that handle DMA-driven channel work, freeing the main PowerPC core for control plane and protocol stack processing. This heterogeneous multiprocessing architecture made the PowerQUICC II family a workhorse for legacy telecom and edge-router platforms in the 2000s. Typical applications include SOHO and enterprise routers, DSLAM line cards, T1/E1 aggregation, industrial control-plane boards, and legacy VoIP gateway designs. For modern designs NXP recommends migrating to the QorIQ families, but the MPC8255AVVPIBB remains widely available through authorized and independent distributors due to long service in deployed equipment. When designing with this device, allocate careful PCB layout effort to the 480-ball TBGA footprint, which demands multi-layer routing, controlled-impedance traces for the memory bus, and a substantial copper pour under the package for thermal management. Designers should consult the official Freescale/NXP MPC8255 hardware specifications document for memory timing, JTAG and boundary-scan requirements. This page synthesizes distributor pricing, parametric comparison data, drop-in alternatives and practical design notes that go beyond the manufacturer datasheet alone, helping engineers source, qualify and substitute the MPC8255AVVPIBB with confidence.

見積もり お問い合わせ