集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MPC8271CZQTIEA557 - PowerQUICC II MPU, 400 MHz, 516-PBGA | NXP
MPC8271CZQTIEA557

MPC8271CZQTIEA557 - PowerQUICC II MPU, 400 MHz, 516-PBGA | NXP

The NXP (formerly Freescale) MPC8271CZQTIEA557 is a PowerQUICC II family microprocessor built on the PowerPC G2_LE core architecture, delivering up to 400 MHz core performance in a 516-pin plastic BGA (PBGA) package measuring 27 x 27 mm. It integrates a 32-bit RISC CPU subsystem with a Communications Processor Module (CPM) that combines networking peripherals, DMA controllers, and protocol engines on-chip. What is an MPU (Microprocessor Unit)? A microprocessor is the central processing IC in an embedded system. Unlike a microcontroller (MCU), an MPU typically requires external memory, external peripherals, and external power management, and is paired with companion chips to form a complete SoC-like platform. The PowerQUICC II hierarchy sits in the broader category of communications processors - PowerPC core -> PowerQUICC II family -> communications MPU -> embedded microprocessor -> semiconductor. PowerQUICC II MPUs are widely deployed in telecom, networking, and industrial control equipment where deterministic communication throughput matters. Key features of the MPC8271CZQTIEA557 include a 16 Kbyte instruction cache, 16 Kbyte data cache, integrated Fast Ethernet MAC, dual UART, dual I2C, USB 2.0 (per the Freescale-era datasheet family), PCI bridge interface, and multiple serial interfaces. The device operates from a 3.3 V I/O supply with separate core voltage rails and supports operating temperatures up to 105 C junction. The 27 x 27 mm PBGA package provides the high pin count and thermal performance required for high-speed parallel buses. The MPC8271 architecture combines a general-purpose 32-bit PowerPC core with a hardware protocol engine (CPM) that handles communication tasks independently, reducing CPU load for networking, serial, and bridging workloads. This makes the device suitable for routing, switching, and protocol conversion systems. Typical applications include SOHO / mid-range routers, network attached storage (NAS), industrial control with Ethernet/IP, telecom base station controllers, and legacy DSLAM / access multiplexer designs. Engineering note: the 516-PBGA footprint demands multilayer PCB stack-up with controlled-impedance routing for the external memory bus. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8271VRMIBA - PowerQUICC II MPC8271, 266MHz, 516-PBGA | NXP
MPC8271VRMIBA

MPC8271VRMIBA - PowerQUICC II MPC8271, 266MHz, 516-PBGA | NXP

The NXP MPC8271VRMIBA is a PowerQUICC II integrated communications processor that combines a 32-bit Power Architecture core with a separate CPM (Communications Processor Module) on a single die. It runs at 266MHz, operates across a 0C to 105C junction range, and is offered in a 516-ball PBGA package measuring 27x27 mm, designed for cost-sensitive networking and telecom infrastructure. A PowerQUICC II processor is a highly integrated system-on-chip that pairs a general-purpose Power Architecture core with a dedicated RISC communications engine to offload networking tasks such as HDLC, ATM, Ethernet MAC, and UART handling. In the broader taxonomy, this places it as a communications processor -> embedded MPU -> microprocessor -> integrated circuit. The architecture is a successor to the original PowerQUICC I (MPC860) line and is widely used in routers, DSLAMs, and industrial control planes where deterministic I/O throughput matters more than raw clock speed. Key features of the MPC8271VRMIBA include the 266MHz PowerPC G2_LE core, dual 10/100 Ethernet MACs supported by the CPM, a 32-bit PCI interface, three fast UARTs, and a 60x-compatible bus with SDRAM controller. The device integrates hardware security for encryption acceleration and is fabricated in NXP's 0.13 micron HiP7 process, which balances leakage and performance for embedded workloads. From an architectural standpoint, the Power Architecture core executes the operating-system and control-plane code while the CPM autonomously services time-critical I/O via microcode-driven protocol engines, freeing the core from bit-banging. This dual-engine approach is what historically differentiated PowerQUICC II from simpler ARM-based MCUs in wired networking designs. Typical applications include small-to-medium enterprise routers, integrated access devices, industrial gateways, and line cards for legacy telecom equipment. The 60x bus and dual Ethernet ports make it well suited to designs that need to bridge legacy MII/RMII peripherals with modern switching fabrics. Selected peripherals from the Site MPN list such as the MAX1304ECM/V+ ADC and MAX1363MEUB+ ADC are often paired on the same control board for sensor aggregation. When laying out this BGA, allocate at least four PCB layers with a continuous ground plane under the package; the 27x27 mm footprint leaves space for trace fan-out between balls on the inner layers. Decouple each Vdd/VddCore supply pair with a 0.1 uF X7R plus a 10 uF tantalum within 5 mm of the ball to keep the CPM's SERDES-like I/O quiet during burst transfers.

見積もり お問い合わせ
MPC8271VRTIEA - 400MHz PowerQUICC II MPU, 516-PBGA | NXP
MPC8271VRTIEA

MPC8271VRTIEA - 400MHz PowerQUICC II MPU, 516-PBGA | NXP

The NXP MPC8271VRTIEA is a PowerQUICC II communications processor that integrates a PowerPC G2_LE core running at 400 MHz (760 MIPS) with a separate Communications Processor Module (CPM) supporting PCI, USB, Fast Ethernet, UTOPIA, and HDLC/T1/E1 channels, housed in a 516-pin PBGA (27x27 mm) package. A PowerQUICC II processor is a system-on-chip built around the PowerPC architecture, combining general-purpose computation with hardware-accelerated protocol processing. The MPC82xx family sits within the broader hierarchy of embedded microprocessors, communications processors, and SoCs from Power Semiconductors / NXP's networking portfolio, designed for wired/wireless infrastructure, industrial control, and storage routers where deterministic throughput on multiple serial channels is mandatory. The integrated CPM offloads protocol stacks from the CPU core, preserving MIPS for application, control-plane, or routing tasks. Key features include 16KB instruction and 16KB data L1 caches, a 32-bit PCI interface compliant with PCI 2.2, dual 10/100 Mbps Fast Ethernet controllers, an integrated USB 1.1 device/host controller, a UTOPIA Level-2 interface for ATM/ADSL framers, and multi-channel HDLC for T1/E1 WAN links. The Memory Controller supports DDR SDRAM, 60x bus expansion, and local bus peripherals, while the Security Engine accelerates IPSec, 3DES, AES, SHA-1, and MD5. Power management is provided through multiple clock domains and a 1.5V core / 3.3V I/O split. Typical applications include DSLAM line cards, multi-service access routers, T1/E1 channel banks, industrial serial-protocol gateways, and storage RAID controllers. The 516-pin PBGA delivers both the high pin count and signal integrity required for simultaneous PCI, Ethernet, and serial interfaces, while the 27x27 mm footprint keeps board area modest for high-density line-card layouts. When designing with this processor, ensure 4-layer PCB stack-up with continuous ground plane under the BGA to maintain signal integrity for DDR and PCI signals. Decoupling requires 0.1 µF ceramic capacitors within 5 mm of every power pin and bulk tantalum/polymer capacitors on each supply rail. The JTAG boundary-scan chain must remain accessible for production test. This page synthesizes distributor pricing, drop-in alternatives from the same PowerQUICC II family, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8271ZQMIBA - PowerQUICC II MPU, 266MHz, 516-PBGA | NXP
MPC8271ZQMIBA

MPC8271ZQMIBA - PowerQUICC II MPU, 266MHz, 516-PBGA | NXP

The NXP (formerly Freescale) MPC8271ZQMIBA is a PowerQUICC II integrated communications processor with a 32-bit Power Architecture core running at 266MHz, housed in a 516-pin PBGA (27x27 mm) package. It operates from a 1.5V core / 3.3V I/O dual-rail supply and integrates a high-performance G2_LE core with a separate RISC communications processor module (CPM) on-chip. A microprocessor (MPU) is a single-chip CPU that integrates core, cache, memory controller and peripheral interfaces into one package, sitting at the top of the embedded-system hierarchy above microcontrollers (MCUs). The PowerQUICC II family specifically addresses telecom and networking infrastructure where simultaneous high-throughput communication protocol handling and general-purpose control are required. The 'Power Architecture' instruction set is a superset of the original PowerPC ISA and is licensed across multiple vendors, giving the MPC8271 a robust toolchain ecosystem. Key features of the MPC8271ZQMIBA include 16KB instruction and 16KB data Level-1 caches, a 32-bit 60x bus to external memory, dual 10/100 Ethernet MACs, dual Fast (H.110-like) serial communication controllers, USB, I2C, SPI, and a 32-bit PCI interface. The on-chip CPM offloads protocol processing (ATM, HDLC, Ethernet bridging) from the core, a defining PowerQUICC trait. The 516-PBGA package exposes the full peripheral set while remaining manageable for forced-air cooling at 266MHz. Architecturally, the device uses a 0.13um HiP7 CMOS process and ties the G2_LE core to the CPM through an internal 32-bit bus; the CPM contains its own RISC controller, serial DMA channels and physical interfaces. Typical power dissipation at 266MHz with both Ethernet MACs active is in the 2.5W range, which is well within the PBGA thermal envelope. Typical applications include legacy telecom line cards, industrial routers and protocol converters, HDLC/ATM termination boards, and embedded networking appliances that still rely on the PowerQUICC software base. Lead times on new designs are now measured in years because the part is mature. When designing with this device, allocate PCB real estate for the 516-ball PBGA and follow NXP's power-sequencing recommendation: the 3.3V I/O rail must reach 70% of nominal before the 1.5V core rail is applied to prevent long-term reliability degradation. Use the on-chip PLL configuration and observe the 266MHz maximum frequency for industrial-grade variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8271ZQMIBA557 - PowerQUICC II 32-Bit MPU, 266MHz | NXP | 516-PBGA
MPC8271ZQMIBA557

MPC8271ZQMIBA557 - PowerQUICC II 32-Bit MPU, 266MHz | NXP | 516-PBGA

The NXP (formerly Freescale) MPC8271ZQMIBA557 is a PowerQUICC II family integrated communications processor (MPC82xx) featuring a 32-bit PowerPC G2_LE core running at 266MHz, packaged in a 516-ball plastic BGA measuring 27x27 mm. The 'ZQMIBA' suffix encodes 266MHz core clock, 1.5V core Vdd, 3.3V I/O, and a 516-PBGA industrial-temperature package. The '557' trailing suffix denotes a specific tape-and-reel / customer-tier variant per NXP's orderable part numbering scheme. A PowerQUICC II microprocessor is a member of the communications-processor class of devices that integrates a PowerPC CPU core with system peripherals tailored for networking and telecom infrastructure. The taxonomy flows from microprocessor -> integrated communications processor -> embedded MPU -> semiconductor device. The PowerQUICC architecture (PowerPC + QUICC) was created specifically for routing, switching, and protocol bridging where MIPS, deterministic interrupt latency, and rich serial connectivity are required. Key differentiating parameters include the 266MHz PowerPC G2_LE core, integrated CPM (Communications Processor Module) supporting up to three fast communications interfaces (FCCs), dual 10/100 Ethernet MACs, and a 64-bit 60x bus to external SDRAM. The 516-PBGA package provides the pin density needed for the parallel system bus, PCI interface, and the multi-channel serial ports. Memory interface supports up to 1GB of DDR or SDR SDRAM through the memory controller. Typical applications include enterprise routers, DSLAM line cards, wireless base-station controllers, protocol-conversion gateways, and industrial control boards requiring deterministic networking. The combination of PowerPC compute performance and hardware-accelerated communications channels (UTOPIA, HDLC, ATM) makes the MPC8271 suitable for legacy 3G/2G infrastructure and modern industrial Ethernet bridges that benefit from on-chip serial engines. Designers should pay close attention to the 1.5V core / 3.3V I/O dual-rail supply sequencing, the 60x bus termination, and the JTAG/BDM debug port accessibility on the 516-ball BGA. PCB layout requires microvia stack-ups and matched-length tracks for DDR memory and 60x bus signals. This page consolidates distributor stock, lifecycle status, and drop-in alternatives into a single engineering reference.

見積もり お問い合わせ
MPC8272CVRMIBA - 266MHz PowerQUICC II MPU | NXP | SoC
MPC8272CVRMIBA

MPC8272CVRMIBA - 266MHz PowerQUICC II MPU | NXP | SoC

The NXP (formerly Freescale) MPC8272CVRMIBA is a PowerQUICC II communications processor based on the PowerPC G2_LE core, delivering 266 MHz core clock and 505.4 MIPS performance in a 516-pin PBGA (27x27 mm) package. It integrates a 32-bit Power Architecture core with a high-bandwidth Communications Processor Module (CPM), PCI, USB, UTOPIA, and an integrated SEC (Security) engine for hardware-accelerated encryption. The part operates on a 3.3 V I/O supply with an internal core voltage rail and supports an industrial -40C to +105C temperature range. A microprocessor (MPU) is the central processing unit of an embedded system that executes operating-system and application code, manages memory, and orchestrates peripherals. PowerQUICC II is NXP's networking-optimized MPU family; it sits in the PowerPC -> MPU -> embedded processor -> semiconductor taxonomy and is designed for cost-sensitive wired-networking and telecommunications equipment. Key features include a single G2_LE core with 16 KxMM lanes of instruction and data caches, dual 10/100/1000 Ethernet MAC support via the CPM, integrated Security Engine (SEC 2.0), two UARTs, I2C, SPI, and a 32-bit PCI interface (v2.2). Memory support covers 32-bit DDR SDRAM with ECC, a 32-bit data path, and glueless connection to common networking PHYs. The integrated SEC block handles DES, 3DES, AES, SHA-1/MD-5 and public-key acceleration. The architecture pairs a general-purpose PowerPC core with a dedicated RISC-based CPM that offloads DMA, serial, and ATM/UTOPIA processing. This split architecture lets the host core run control-plane software (routing stacks, management code) while the CPM handles time-critical data movement without CPU intervention - delivering wire-speed performance on multi-port Ethernet, xDSL, and wireless backhaul designs. Typical applications include small/medium enterprise (SME) routers, xDSL and cable modems, industrial gateways, wireless LAN access points, and secured VPN/firewall appliances. The integrated SEC makes it especially suited to equipment requiring hardware-accelerated IPsec, SSL/TLS, or 3DES/AES throughput. Design consideration: the 27x27 mm PBGA requires a 6-layer PCB with controlled-impedance routing for the DDR and PCI buses. Use NXP's reference schematics and BSDL files for JTAG boundary-scan bring-up, and validate timing margins against the DDR SDRAM controller guidelines. This page synthesizes distributor pricing, parametric alternatives, and practical hardware-design notes not collated on the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8272CVRTIEA - PowerQUICC II MPU 400MHz PBGA-516 | NXP
MPC8272CVRTIEA

MPC8272CVRTIEA - PowerQUICC II MPU 400MHz PBGA-516 | NXP

The NXP MPC8272CVRTIEA is a PowerQUICC II communications microprocessor integrating a Power Architecture core (G2_LE) with the CPM (Communications Processor Module), delivering 400 MHz core frequency in a 516-pin PBGA (27x27 mm) package. It combines a 32-bit RISC CPU, dual 10/100 Ethernet MAC, PCI/USB/UTOPIA interfaces, and a Security Engine (SEC) for cost-sensitive networking and communications systems. An MPU (Microprocessor Unit) is an integrated processor IC that executes software from external memory and orchestrates peripheral subsystems; in the hierarchy it sits above microcontrollers (which include on-chip flash) and below multi-core SoCs. PowerQUICC II devices like the MPC8272 pair a general-purpose host CPU with a specialized RISC-based CPM that offloads DMA, serial, and protocol processing, a common architecture in 2000s-era routers, DSLAMs, and industrial gateways. The 'CV' suffix indicates -40C to +105C extended-temperature grade and 'RTI' denotes 516-pin PBGA tray packaging. Key features include 400 MHz core clock, Power Architecture G2_LE instruction set with MMU and 16 KB I/D L1 caches, integrated SEC for IPSec/SSL acceleration, hardware PCI 2.2 controller (32-bit/66 MHz), USB 1.1 host/function, UTOPIA-II ATM PHY interface, dual 10/100 Ethernet (MII/RMII), four TDM/I2S serial channels, and JTAG IEEE 1149.1 boundary scan. Power consumption is approximately 2.0 W at 400 MHz and the device operates from a 3.3 V I/O and 1.5 V core supply. Architecturally the G2_LE core handles control-plane and management tasks while the CPM autonomously services 10/100 Ethernet, ATM, TDM, and USB endpoints through DMA-driven FCCs (Fast Communications Controllers), MCCs, and SCCs. The integrated SEC engine accelerates 3DES, AES, SHA-1/MD5, and public-key operations, enabling VPN termination at line rate on mid-range branch-office routers. Typical applications include branch-office routers, xDSL line cards, VoIP gateways, industrial control with Ethernet, protocol converters, and IEEE 802.11 access-point SoC platforms. The combination of CPM offload and SEC acceleration made the MPC8272 a workhorse for cost-sensitive secure communications designs in 2005-2012. Design considerations: keep all four GND balls and the four VDD core balls directly bonded to dedicated power planes; place 100 nF decoupling within 5 mm of each supply pin; use impedance-controlled 50 ohm traces for Ethernet MII; and verify boot ROM timing against the 60x bus specification. The 27x27 mm PBGA demands a 1.0 mm pitch BGA fanout with microvia-in-pad for reliable assembly.

見積もり お問い合わせ
MPC8272CZQMIBA - PowerQUICC II 266MHz MPU, 516-PBGA | NXP
MPC8272CZQMIBA

MPC8272CZQMIBA - PowerQUICC II 266MHz MPU, 516-PBGA | NXP

The NXP MPC8272CZQMIBA is a PowerQUICC II communications processor built on the PowerPC G2_LE core, delivering 32-bit performance at 266 MHz in a 516-pin PBGA (TEPBGA, 27x27 mm) package. It is designed for cost-sensitive networking and communications equipment, integrating PCI, USB, CPM (Communications Processor Module), UTOPIA, and SEC (hardware security) engines on a single die, which allows OEMs to consolidate multiple functions into one SoC and reduce BOM cost. Background knowledge: a PowerQUICC II processor is a Power-Architecture-based communications system-on-chip (SoC) that combines a general-purpose embedded CPU core with a dedicated RISC-based Communications Processor Module (CPM). The CPM offloads serial-channel, ATM, Fast Ethernet, HDLC, and encryption tasks from the main core, which is why the MPC82xx family became the de-facto choice for mid-range routers, DSLAM line cards, and industrial-control gateways in the 2000s. In the broader taxonomy it sits between classical microcontrollers and high-performance application processors, specializing in I/O-centric rather than compute-centric workloads. Key features include a 266 MHz PowerPC G2_LE core with MMU and on-chip caches, hardware-accelerated SEC (Security Engine) for IPSec/SSL/TLS bulk encryption, a CPM that supports dual Fast Ethernet MACs plus a UTOPIA-II interface for ATM/PHY, integrated PCI 2.2 host/agent controller, USB 1.1, and a 60x-compatible external bus. The part is specified for the -40 to +105 °C industrial temperature range (the trailing "I" in the part number), which is unusual for a high-pin-count communications processor and signals its use in outdoor or industrial enclosures. The device is built on a 0.13 µm CMOS process and runs from a 3.3 V I/O supply plus a 1.5–1.8 V internal core voltage, requiring a multi-rail power tree with sequencing. Memory interface includes a 64-bit 60x bus and a 32-bit local bus with SDRAM controller and up to eight banks, enabling direct glueless attachment of DDR-era SDRAM, Flash, and peripherals. Typical applications include SME routers, xDSL line cards, industrial Ethernet gateways, factory-floor protocol converters, and wireless base-station control boards. The integrated SEC engine makes it well suited to VPN concentrators and IPSec-accelerated CPE equipment. Power designers must respect the multiple power rails and the high transient current of the 266 MHz core; a 4-layer PCB with dedicated power planes and bulk decoupling near each BGA row is strongly recommended.

見積もり お問い合わせ
MPC8272CZQTIEA557 - PowerQUICC II MPU 400MHz PBGA516 | NXP
MPC8272CZQTIEA557

MPC8272CZQTIEA557 - PowerQUICC II MPU 400MHz PBGA516 | NXP

The NXP Semiconductors MPC8272CZQTIEA557 is a PowerQUICC II family microprocessor (MPU) built on the Power Architecture (32-bit) technology with a core speed of 400 MHz, housed in a 516-ball plastic BGA (PBGA516) package. The device integrates a G2_LE core with a 32-bit PowerPC instruction set, on-chip L1 caches, and a rich communications engine tailored for wired networking and embedded control applications. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system on a single chip. In modern embedded hierarchies, an MPU is a superset of a microcontroller (MCU) — MPUs typically lack on-chip non-volatile program memory but offer higher clock frequencies, MMU/memory management, external bus interfaces, and richer peripheral integration. The MPC8272 sits at the MPU tier of the embedded taxonomy: PowerQUICC II -> PowerQUICC family -> communications processors -> MPUs -> microcontrollers and processors -> semiconductors. Key differentiating features of the MPC8272 include its dual PowerQUICC communications engine, support for 10/100 Mbps Ethernet MACs, up to four serial communications controllers, and a 60x-compatible 32-bit external bus. The integrated system interface supports SDRAM, Flash, and ROM peripherals directly. The internal core voltage is 1.5 V with 3.3 V I/O, and the device is fabricated on a 0.13 µm HiP7 process. Architecturally, the MPC8272C family pairs a high-performance e500 or G2_LE PowerPC core with the CPM (Communications Processor Module), offloading DMA, HDLC/UART/SCC, and ATM/POS-PHY processing from the core. This split-architecture model allows the device to sustain high-throughput networking traffic while keeping MIPS available for the host operating system, which typically runs an embedded RTOS or a custom control loop. Typical applications include wired routers and switches, DSLAM line cards, industrial control and automation gateways, telecom base-station controllers, and defense/aerospace embedded computing modules that require deterministic communications alongside a 32-bit general-purpose control plane. When designing with the MPC8272, observe thermal and power guidelines: junction-to-ambient resistance is package-dependent and the part is rated for industrial and extended temperature grades. Use proper BGA PCB layout with via-in-pad or dogbone fan-out, matched-impedance traces for the external memory bus, and adequate decoupling. This page synthesizes authorized distributor stock indicators, drop-in and pin-compatible alternatives, and design notes compiled from public datasheet excerpts and the cross-reference web results — content not present on the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8272VRMIBA - PowerQUICC II 266MHz MPU | NXP Semiconductors
MPC8272VRMIBA

MPC8272VRMIBA - PowerQUICC II 266MHz MPU | NXP Semiconductors

The NXP MPC8272VRMIBA is a PowerQUICC II family microprocessor built on Power Architecture technology, operating at 266 MHz and delivering 505.4 MIPS of performance. It integrates a 32-bit PowerPC G2_LE core with the CPM (Communications Processor Module) co-processor, an integrated SEC (Security Engine), and on-chip PCI, USB, and UTOPIA interfaces in a 516-pin TEBGA / PBGA package rated 0C to 105C. The part is supplied as 1.5 V core / 3.3 V I/O and fabricated in a 0.13 um CMOS process. A PowerQUICC II MPU is a system-on-chip networking microprocessor that combines a general-purpose PowerPC core with a dedicated RISC communications engine (CPM). This dual-processor architecture is used in routers, switches, and wireless base stations where the CPM offloads DMA, TDM, ATM, and Ethernet MAC processing from the main core, freeing the CPU for routing, encryption, and control-plane software. PowerQUICC II sits within the broader taxonomy: MPU -> microprocessor -> processor -> integrated circuit -> semiconductor. Key features include hardware-accelerated encryption via the integrated SEC engine, dual 10/100 Mbps Ethernet MACs through the CPM, a 32-bit/66 MHz PCI interface, USB 1.1 host/slave, UTOPIA-II for ATM/PHY glueless connectivity, and 16 Kbytes of instruction cache plus 16 Kbytes of data cache. The 516-pin PBGA (27 x 27 mm) package exposes the full external memory bus for SDRAM, Flash, and peripheral expansion. The MPC8272 uses a 60x bus to external memory and a separate CPM local bus. The CPM contains independent RISC controllers for Fast Ethernet, HDLC/TDM, ATM, I2C, SPI, and USB, allowing wire-speed packet processing without CPU intervention. The integrated SEC engine performs DES, 3DES, AES, SHA-1, and MD5 in hardware, eliminating software-encryption bottlenecks in VPN and IPsec gateways. Typical applications include small-to-medium enterprise routers, DSLAM line cards, industrial Ethernet gateways, wireless base station controllers, and IPsec/VPN acceleration. The 0C to 105C operating range supports industrial networking equipment deployed in uncontrolled environments. When designing with the MPC8272VRMIBA, allocate generous power and ground planes around the 516-ball BGA to manage core current transients, follow the DDR/SDRAM routing rules in the hardware specification, and use a JTAG-controlled BDM/BDI debugger for low-level bring-up. This part is in NXP's EOL/end-of-life pipeline per the NXP product page, so design wins should be qualified against current lifecycle status and last-time-buy windows before committing to new production.

見積もり お問い合わせ
MPC8272VRPIEA557 - PowerQUICC II MPC8272 MPU 300MHz | NXP
MPC8272VRPIEA557

MPC8272VRPIEA557 - PowerQUICC II MPC8272 MPU 300MHz | NXP

The NXP (formerly Freescale) MPC8272VRPIEA557 is a PowerQUICC II communications microprocessor built on Power Architecture technology, integrating a 603e core with a CPM (Communications Processor Module) and operating at a 300 MHz core clock. It is housed in a 516-pin PBGA (lead-free) package and targets networking line-card, router, and telecom controller applications where integrated Fast Ethernet, UART, SPI, I2C, and USB 2.0 peripherals reduce external component count. A PowerQUICC II microprocessor is a member of the Power Architecture microprocessor family designed for embedded communications. It sits in the hierarchy of communications SoCs alongside the larger PowerQUICC III family, combining a general-purpose PowerPC 603e core with dedicated hardware acceleration for ATM, HDLC, Fast Ethernet MAC, and PCI bridging. This integration lets designers replace a host CPU plus multiple communication coprocessors with a single chip, simplifying board layout and lowering bill-of-materials cost in mid-range networking equipment. Key features of the MPC8272VRPIEA557 include dual 10/100 Mbps Fast Ethernet controllers, a 32-bit PCI 2.2 interface, USB 2.0 (full-speed) with on-chip PHY, 60x bus to external memory, DDR SDRAM controller, and an FCC (Fast Communications Controller) bank that supports up to three HDLC/PPP/ATM channels. The on-chip 16 KB instruction cache and 16 KB data cache reduce external memory bandwidth pressure, and a dedicated CPM RISC engine offloads protocol processing from the main CPU. Architecturally, the device combines a PowerPC 603e integer unit (single-issue, 7-stage pipeline) with the dedicated CPM co-processor clocked independently. This heterogeneous design optimizes throughput: the main CPU handles control plane and exception processing, while the CPM executes data-plane protocol engines. The integrated dual Fast Ethernet MACs and USB 2.0 controller shorten design cycles for SOHO router, DSLAM line card, and industrial gateway products. Typical applications include integrated access devices (IADs), SOHO/SMB routers, DSL/cable modem gateways, VoIP media gateways, and industrial control with Ethernet. It is also used in legacy telecom line cards where deterministic serial channelization and PCI host bridging are required in a single device. The 516-pin PBGA package has a thermal resistance that demands a multi-layer PCB with a thermal via array and adequate copper heatsinking under sustained full load. Designers should follow the AN2834 layout guide and ensure the DDR reference clock and 60x bus are length-matched per the MPC8272 hardware specifications to guarantee signal integrity above 100 MHz. This page synthesizes current distributor stock, parametric alternatives, and datasheet-derived design notes not consolidated on a single manufacturer reference page.

見積もり お問い合わせ
MPC8272VRTIEA - PowerQUICC II, 400MHz, 516-FPBGA SoC MPU | NXP
MPC8272VRTIEA

MPC8272VRTIEA - PowerQUICC II, 400MHz, 516-FPBGA SoC MPU | NXP

The NXP MPC8272VRTIEA is a high-performance PowerQUICC II microprocessor built on Power Architecture technology, integrating a 32-bit PowerPC G2_LE core running at 400 MHz inside a 516-ball FPBGA (27 x 27 mm) package. It is a cost-sensitive system-on-chip (SoC) solution that combines an embedded G2_LE core with the CPM (Communications Processor Module), hardware-accelerated SEC (Security Engine), PCI, USB, and UTOPIA interfaces, addressing the integration needs of small-to-medium enterprise (SME) routers, DSLAMs, and access equipment. What is a PowerQUICC II processor? PowerQUICC II is a NXP/Motorola communications-processor family that integrates a PowerPC core with a RISC-based Communications Processor Module (CPM) optimised for fast peripheral and protocol processing. Within the broader taxonomy, it sits between a discrete microcontroller and an application processor: a PowerPC MPU -> embedded microprocessor -> communications SoC -> PowerQUICC II. The CPM offloads DMA, HDLC, Ethernet and ATM from the host core, which is why PowerQUICC II parts remained popular in legacy networking designs even after newer ARM SoCs arrived. Key features of the MPC8272VRTIEA include: a 400 MHz G2_LE core, 16 Kbytes of instruction cache and 16 Kbytes of data cache with parity protection, an integrated 32-bit PCI bridge with up to 66 MHz operation, a USB 1.1 host/device controller, a multi-channel HDLC and Fast Ethernet MAC (UTOPIA L2 capable), and the SEC engine for DES/3DES/AES/SHA-1 acceleration. The device operates from a 1.5 V core supply with separate I/O rails, and supports 0 to 105 degrees C junction temperatures. Architecturally, the MPC8272VRTIEA uses a two-bus system: the 64-bit PowerPC 60x system bus talks to external SDRAM and Flash, while an internal 32-bit local bus bridges peripherals. The CPM runs at a configurable ratio to the core, allowing designers to trade peripheral throughput against power dissipation. The SEC crypto-block is wired directly into the CPM to provide wire-speed IPsec/VPN throughput without loading the host core. Typical applications include SME routers, integrated access devices, VoIP gateways, DSLAM line cards, industrial control planes and protocol bridges. The -40 C to +105 C industrial temperature grade makes this part suitable for outdoor and hardened enclosures as well as controlled server rooms. Designers should evaluate the 516-FPBGA ball assignment and 27 x 27 mm PCB footprint early, because routing 32-bit parallel memory, PCI and an MII/UTOPIA interface simultaneously requires 4-to-6 layer PCB stack-ups with controlled-impedance traces. NXP provides a complete reference design (schematic, gerbers and U-Boot firmware) in the PowerQUICC II development kit, which is the recommended starting point for first-time users. This page synthesises distributor pricing across DigiKey, Mouser and Octopart, suggests drop-in MPC8272 and MPC8247 family alternates when the 400 MHz speed grade is out of stock, and supplies PCB-layout and thermal notes that complement (but never replace) the manufacturer datasheet.

見積もり お問い合わせ
MPC8272VRTMFA - PowerQUICC II 400MHz SoC MPU | NXP | Networking
MPC8272VRTMFA

MPC8272VRTMFA - PowerQUICC II 400MHz SoC MPU | NXP | Networking

The NXP MPC8272VRTMFA is a PowerQUICC II integrated communications processor built on the PowerPC G2_LE core architecture, running at 400MHz with a 32-bit data path, housed in a 516-PBGA package (27x27 mm). It is a system-on-chip (SoC) that combines a high-performance Power Architecture core with the CPM (Communications Processor Module), SEC (Security Engine), PCI, USB, and UTOPIA interfaces for cost-sensitive networking and communications equipment. A PowerQUICC II processor belongs to the microprocessor (MPU) category within embedded processors; it integrates a CPU core with on-chip peripherals traditionally found in separate ASICs. By collapsing multi-chip designs into one BGA package, PowerQUICC II reduces BOM count, board area, and power consumption for routers, DSLAMs, and wireless base stations that previously required a CPU plus a network ASIC. Key features of the MPC8272VRTMFA include an integrated hardware security engine (SEC) for encryption offload, an FCC (Fast Communications Controller) supporting UTOPIA, ATM, and POS interfaces, dual 10/100 Mbps Ethernet MACs with MII/RMII interfaces, a USB 1.1 host/device controller, a 32-bit PCI 2.2 interface, and memory controllers for DDR and SDRAM. The device is designed for 0 to 105C operation in industrial-grade networking environments. The PowerPC G2_LE core executes the Power Architecture instruction set with a hardware MMU supporting 32-bit virtual addressing and configurable small (16K) and large (256K) instruction and data caches. The CPM operates independently from the core, offloading DMA, HDLC, Ethernet, and ATM processing, which lets the CPU focus on routing, signaling, and management tasks. Typical applications include small-to-medium enterprise (SME) routers, integrated access devices (IAD), digital subscriber line access multiplexers (DSLAM), wireless local loop base stations, VPN/firewall appliances, and industrial control networking platforms requiring IPsec/TLS acceleration via the SEC engine. When designing with this device, allow generous PCB real estate for the 516-BGA footprint; the 27x27 mm package requires 0.8 mm pitch vias and multi-layer escape routing. Provide a stable 1.5V core and 3.3V I/O supply with bulk decoupling at each regulator, and use a JTAG header for boundary-scan bring-up. This page synthesizes real-time distributor pricing, replacement alternatives from the MPC82xx family, and design considerations not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
MPC8275CVRMIBA - PowerQUICC II 266MHz SoC MPU, 516-PBGA | NXP
MPC8275CVRMIBA

MPC8275CVRMIBA - PowerQUICC II 266MHz SoC MPU, 516-PBGA | NXP

The NXP (formerly Freescale) MPC8275CVRMIBA is a PowerQUICC II family microprocessor based on the PowerPC G2_LE core, integrating a single 32-bit CPU running at 266 MHz with an on-chip RISC Communications Processor Module (CPM) for offloading serial-protocol work from the host core. It is offered in a 516-ball PBGA package (27 x 27 mm) and is rated for the industrial -40 C to +105 C temperature range. A PowerQUICC II processor is a system-on-chip (SoC) communications processor that combines a PowerPC host CPU with a dedicated CPM supporting HDLC, Ethernet (10/100 Mbit), ATM/UTOPIA, USB, I2C, SPI, and PCI. It sits above simple microcontrollers and below full application processors in the embedded hierarchy, and is classified as an integrated microprocessor (MPU) within power-management-adjacent embedded silicon. Key features include 505.4 MIPS sustained performance, integrated DRAM/SDRAM memory controller, dual 10/100 Ethernet MACs, PCI 2.2 interface, USB 1.1 host/client, HDLC TDM channels, UTOPIA PHY interface, and an external bus supporting up to 133 MHz operation. The CPM runs autonomously and handles DMA, protocol framing, and time-division multiplexing without host intervention. The MPC8275CVRMIBA is architecturally positioned between the lower-frequency MPC8270 (266 MHz-class) and the higher-throughput MPC8280, giving designers a balanced choice for cost-sensitive mid-range routers, DSLAM line cards, and industrial control gateways where deterministic protocol handling matters more than raw CPU throughput. Typical applications include wired networking routers and switches, telecom line cards (xDSL, ISDN, T1/E1), industrial serial gateways, VoIP media gateways, and embedded control platforms requiring deterministic multi-protocol I/O. The 516-PBGA package requires careful PCB layout with multiple power and ground planes for thermal management. When designing with this device, plan a 4- to 6-layer PCB with a continuous ground plane beneath the BGA and a minimum 1 oz copper inner layer for power distribution. Decouple each power pin with 100 nF X7R placed within 5 mm of the ball. Observe the 266 MHz core clock and 133 MHz external bus skew budgets specified in the NXP hardware design checklist. This page synthesizes distributor pricing, EOL signals, drop-in alternates, and practical PCB/layout guidance not collected in the manufacturer datasheet, giving an engineer a single decision-ready reference for the MPC8275CVRMIBA.

見積もり お問い合わせ
MPC8275VRMIBA - PowerQUICC II 266MHz MPU | NXP | 516-PBGA
MPC8275VRMIBA

MPC8275VRMIBA - PowerQUICC II 266MHz MPU | NXP | 516-PBGA

The NXP MPC8275VRMIBA is a PowerQUICC II communications processor built on the PowerPC G2_LE architecture, integrating a 266 MHz 32-bit core with a CPM (Communications Processor Module) co-processor, delivering 505.4 MIPS of processing throughput, and housed in a 516-ball PBGA (27x27 mm, 1 mm pitch) package. An MPU (Microprocessor Unit) is the central processing element of an embedded platform. Within the broader taxonomy, the MPC8275VRMIBA sits as: microprocessor -> embedded MPU -> communications processor -> PowerQUICC II SoC. PowerQUICC II parts target wired/wireless infrastructure where deterministic multi-protocol I/O and PCI connectivity are required on a single die. Key features include an integrated system-on-chip (SoC) design combining the PowerPC core with the CPM co-processor, dual 10/100 Ethernet MACs, PCI interface, USB, HDLC/ATM/UTOPIA support, and a 64-bit data bus. The HiPerMOS7 0.13-micron process provides lower power draw than previous PowerQUICC generations, while maintaining the same 516-PBGA footprint shared with MPC8270/MPC8280 family members. Architecturally, the MPC8275VRMIBA separates control-plane and data-plane tasks: the G2_LE core runs OS and management code, while the CPM handles serial protocol termination, DMA, and Fast Communications Channels. The 516-PBGA package (1 mm pitch) routes out the high pin count required for parallel peripheral buses, DDR memory controller, and dual Ethernet MII/RMII interfaces. Typical applications include wired/wireless infrastructure routers, multi-channel HDLC/TDM bridges, industrial PCI controller cards, DSLAM line cards, and ATM/UTOPIA edge nodes. The combination of PCI host bridge and integrated Ethernet MACs makes it well suited as a head-end controller in customer premises equipment. When designing with this device, thermal dissipation at 266 MHz must be evaluated against the PBGA's exposed-die thermal path. Boards should route all 516 balls to inner power/ground planes to maintain signal integrity on the parallel bus and to provide the decoupling capacitance required by the DDR SDRAM controller. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not typically consolidated on a single product page, giving engineers a practical decision view of the MPC8275VRMIBA.

見積もり お問い合わせ
MPC8275ZQMIBA - PowerQUICC II 266MHz SoC MPU | NXP Semiconductors
MPC8275ZQMIBA

MPC8275ZQMIBA - PowerQUICC II 266MHz SoC MPU | NXP Semiconductors

The NXP Semiconductors MPC8275ZQMIBA is a PowerQUICC II integrated communications processor featuring a 32-bit Power Architecture CPU core running at 266 MHz, a 516-ball PBGA (27x27) package, and an integrated communications engine with PCI, USB, HDLC, Ethernet, and UTOPIA interfaces. It is a system-on-chip (SoC) member of the MPC82xx family, manufactured on a 0.13 micron HiP7 process, intended for wired and wireless infrastructure equipment. Background Knowledge - What is a PowerQUICC communications processor: PowerQUICC is NXP/Freescale's brand name for a family of integrated communications processors that combine a Power Architecture CPU core with a specialized communications processor module (CPM). The CPM offloads peripheral and networking tasks from the main CPU, enabling efficient handling of multiple WAN, LAN, and telecom protocols such as ATM, HDLC, Ethernet, USB, and UTOPIA. PowerQUICC II sits within the broader taxonomy of integrated communications processors -> microprocessors (MPU) -> processors -> semiconductors, and is widely deployed in routers, switches, DSLAMs, and industrial control equipment where deterministic multi-protocol I/O is required. Key features of the MPC8275ZQMIBA include a 266 MHz PowerPC G2_LE CPU core, hardware-accelerated communications via the CPM, integrated support for Fast Ethernet MAC, USB, PCI, HDLC, and UTOPIA, and a 1.5V core / 3.3V I/O dual-rail power design. The 516-pin PBGA package exposes extensive address/data buses and peripheral pins, supporting a wide variety of networking and embedded control applications. The device's commercial operating temperature range (0C to 105C) suits controlled-environment networking gear. At the architecture level, the MPC8275ZQMIBA uses a Harvard-style bus architecture for the CPU, a unified 32-bit peripheral bus for the CPM, and dedicated DMA channels that allow the CPM to move data between peripherals and memory without CPU intervention. This integration reduces BOM count and board area relative to discrete CPU-plus-communications-controller designs, while the wide peripheral set lowers the cost of multi-protocol product variants. Typical applications include wired and wireless infrastructure equipment (DSLAMs, routers, wireless base stations), industrial networking gateways, protocol-conversion appliances, and embedded control systems that require deterministic serial and packet I/O. The combination of CPU throughput and CPM-driven I/O makes it well-suited for products that aggregate multiple physical interfaces. Design consideration: Power-sequencing must follow NXP's reference design because the MPC8275ZQMIBA uses split 1.5V core and 3.3V I/O rails; bring-up order affects CPM register state. Additionally, the large 516-ball PBGA requires careful BGA PCB layout with controlled-impedance traces and matched-length clocks to maintain signal integrity at the full 266 MHz bus speed. This page synthesizes distributor stock checks, NXP/Freescale PowerQUICC II family cross-references, and practical BGA bring-up design notes that go beyond the manufacturer datasheet to assist embedded and network-equipment engineers in component selection.

見積もり お問い合わせ
MPC8280VVUPEA - 450MHz PowerQUICC II SoC MPU | NXP
MPC8280VVUPEA

MPC8280VVUPEA - 450MHz PowerQUICC II SoC MPU | NXP

The NXP (formerly Freescale) MPC8280VVUPEA is a PowerQUICC II family microprocessor integrating a 32-bit PowerPC G2_LE core running at 450 MHz (885 MIPS) with on-chip communications peripherals, housed in a 480-pin TBGA package measuring 37.5x37.5 mm. It combines a high-performance e603e-class core with the CPM (Communications Processor Module) co-processor to offload DMA, HDLC, ATM, USB, Ethernet and PCI bridging from the core. A microprocessor (MPU) is an integrated circuit that contains the CPU, caches, memory controller and peripheral interfaces on one chip; in the PowerQUICC II family the core is paired with a dedicated RISC-based CPM that handles serial and networking I/O autonomously, making the device a single-chip SoC for embedded networking. The MPC8280 sits at the top of the G2_LE family, offering higher core and bus clock options than the lower-cost MPC8270 and MPC8275 variants. Key features include 16 KB instruction cache and 16 KB data cache, dual 10/100 Mbps Ethernet MACs with MII/RMII interfaces, USB 1.1 host/function controller, dual HDLC/serial controllers supporting up to T3/E3 rates, a UTOPIA-II/PATM PHY interface for ATM, and a 32-bit/66 MHz PCI interface that can operate in host or agent mode. The integrated memory controller supports DDR SDRAM at up to 133 MHz and includes a 64-bit local bus with glue-less Flash/SRAM support. Architecturally the device splits processing duties between the PowerPC G2_LE core (running user code and protocol stacks) and the CPM co-processor, which services DMA channels and protocol engines through its own microcoded RISC engine. This dual-engine approach delivers high sustained throughput on serial interfaces without burdening the main core with interrupt-driven I/O, characteristic of PowerQUICC II design. Typical applications include industrial multi-port routers, DSLAM line cards, wireless base-station controllers, VoIP media gateways, industrial Ethernet switches, and PCI-based embedded control cards. The integrated CPM eliminates external protocol ASICs, reducing BOM cost in communications equipment. When designing with this device, plan power sequencing for the 1.8 V and 3.3 V rails and ensure proper JTAG pull-ups. Designers should also budget for a substantial 4-layer PCB with matched-impedance Ethernet and PCI traces. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not found in the manufacturer datasheet, providing engineers a single reference for sourcing and substitution decisions.

見積もり お問い合わせ
MPC8280ZUUPEA - PowerQUICC II MPU, 450MHz, 480-TBGA | NXP
MPC8280ZUUPEA

MPC8280ZUUPEA - PowerQUICC II MPU, 450MHz, 480-TBGA | NXP

The NXP MPC8280ZUUPEA is a PowerQUICC II family microprocessor integrating a PowerPC G2_LE core with a Communications Processor Module (CPM) on a single die, clocked at 450 MHz core / 300 MHz CPM, housed in a 480-pin TBGA package (37.5 x 37.5 mm). It is built on NXP/Freescale's HiPerMOS7 0.13-micron process technology and targets networking, telecom, and industrial control applications requiring both RISC-class processing and high-throughput serial communications. A PowerQUICC II microprocessor belongs to the broader category of communications processors - System-on-Chip (SoC) devices that combine a general-purpose CPU with dedicated serial-protocol engines. Within the embedded hierarchy, it sits as: PowerQUICC II -> PowerQUICC -> embedded MPU -> microprocessor -> integrated circuit. The integrated CPM offloads typical communications tasks such as HDLC, UART, USB, Ethernet MAC, ATM/UTOPIA, and PCI bridging from the main core, which is the architectural origin of PowerQUICC's enduring popularity in legacy networking equipment. Key features include a 32-bit PowerPC G2_LE core with MMU and on-chip caches, integrated CPM supporting 10/100 Ethernet, HDLC/SDLC, USB 1.1, UART, I2C, SPI, PCI 2.2 bridge, and a 64-bit local bus. The device supports SDRAM and DRAM memory controllers with ECC, and offers Security Engine features in some -Z variants. Operating temperature spans 0 to 105C, suitable for commercial and lightly-industrialized environments. The architecture combines an out-of-order-capable G2_LE scalar core with a peripheral engine optimized for cell-based protocol termination, allowing wire-speed handling of multiple HDLC or Ethernet channels without saturating the CPU. Power dissipation is typically under 2 W at full load, a notable improvement over first-generation PowerQUICC II silicon thanks to the HiP7 process shrink. Typical applications include SOHO/enterprise routers, DSLAM line cards, industrial control SoC platforms, networked storage controllers, and legacy telecom baseband cards. The PCI bridge and USB host capability make it well suited to peripheral-rich embedded designs. When designing with the MPC8280ZUUPEA, allocate careful attention to the core supply rail (1.5 V) decoupling and to the TBGA thermal management; 480 balls in a 37.5 mm body concentrate heat at the die shadow. Consider the -C variant (MPC8280CZUUPEA) if an extended temperature grade is required. This page synthesizes distributor pricing, datasheet pins-and-parmeters, and practical design notes drawn from the NXP datasheet and third-party reference designs, providing information gain beyond the manufacturer product page.

見積もり お問い合わせ
MPC8306CVMADDCA - PowerQUICC II Pro 266MHz SoC | NXP Semiconductors
MPC8306CVMADDCA

MPC8306CVMADDCA - PowerQUICC II Pro 266MHz SoC | NXP Semiconductors

The NXP Semiconductors MPC8306CVMADDCA is a PowerQUICC II Pro communications processor based on the Power Architecture e300c3 core, operating at 266 MHz and housed in a 369-pin PBGA (19x19 mm) package. It integrates a single 32-bit core with QUICC Engine technology supporting HDLC, TDM and 10/100 Ethernet (R/MII), plus DDR2 memory controller, USB, CAN, and IEEE 1588 v2 hardware time stamping on the MPC8306 variant. A PowerQUICC processor is a communications-centric system-on-chip (SoC) that combines a Power Architecture CPU with one or more protocol engines, originally designed by Freescale (now NXP) to offload networking, telecom and industrial control workloads from the main CPU. The PowerQUICC family sits at the intersection of microcontrollers (MCUs) and high-performance application processors, evolving into the QorIQ and Layerscape families for newer designs. Understanding this hierarchy helps engineers recognize that the MPC8306 is positioned for cost-sensitive, low-power embedded networking where deterministic protocol handling matters more than raw compute throughput. Key features of the MPC8306CVMADDCA include a 266 MHz e300c3 core with 16 KB instruction / 16 KB data L1 cache, a 32-bit DDR1/DDR2 memory controller with ECC, two 10/100 Ethernet controllers with QoS and classification, two USB 2.0 full-speed controllers (host/device/OTG), dual CAN 2.0B controllers, four UART, dual I2C, SPI, and a local bus controller. Security is supported via integrated SEC 2.0 with DES/3DES/AES/SHA accelerators and a true random number generator. The MPC8306 architecture uses a 32-bit PowerPC superscalar core paired with QUICC Engine technology, which historically handled ATM, HDLC, TDM and Ethernet protocol termination in earlier PowerQUICC generations. On the MPC8306, the QUICC Engine focuses on HDLC, TDM, and Ethernet offload, while the e300c3 core runs control-plane software such as Linux or VxWorks. The device integrates DDR2 memory controller logic that supports up to 256 MB of DDR2 with ECC, eliminating the need for an external memory controller chip. Typical applications include industrial Ethernet gateways, smart grid substation controllers, factory automation PLCs, protocol converters (HDLC/Ethernet/CAN), networked printers, and low-end WiMAX/3G base station control cards. The integrated IEEE 1588 v2 time stamping on the MPC8306 makes it well suited for precision timing over Ethernet in telecom and power-utility networks. When designing with this device, note that the package is a 369-ball PBGA (19x19 mm, 1 mm pitch) which requires a 6-layer PCB minimum for signal integrity and a clean thermal copper pour under the exposed die area. The 0.95 V to 1.05 V core voltage requires careful sequencing with respect to the 3.3 V I/O supply. Also confirm that your firmware target supports the e300c3 core architecture before committing to the MPC8306 over an ARM-based alternative. This page synthesizes distributor stock, drop-in pin-compatible alternatives, parameter comparison and design notes that go beyond the manufacturer datasheet, helping embedded engineers evaluate the MPC8306 for cost-sensitive communications designs.

見積もり お問い合わせ
MPC8306SCVMABDCA - PowerQUICC II Pro SoC 133MHz | NXP
MPC8306SCVMABDCA

MPC8306SCVMABDCA - PowerQUICC II Pro SoC 133MHz | NXP

The NXP MPC8306SCVMABDCA is a PowerQUICC II Pro communications processor built on Power Architecture e300c3 technology, integrating a single 32-bit core running up to 133 MHz in a 369-ball MAP-BGA package (19x19 mm). The device combines a CPU subsystem with the QUICC Engine for HDLC, TDM and 10/100 Ethernet (R/MII) processing, plus IEEE 1588 v2 time-stamping support, making it a cost-effective SoC for embedded networking and industrial control. A communications SoC (System-on-Chip) is an integrated circuit that consolidates a processor core, memory controllers, and dedicated communications peripherals onto a single die. The MPC8306SCVMABDCA sits in the hierarchy SoC -> communications processor -> PowerQUICC II Pro -> MPC830x family, where it serves as the ultra low-end node targeting price-sensitive wireline and industrial designs. Its integrated QUICC Engine offloads bit-level protocol processing from the CPU, enabling deterministic throughput for HDLC and TDM traffic. Key features include a 32-bit PowerPC e300c3 core, 133 MHz operation, DDR2 memory controller, 16-bit local bus, dual 10/100 Ethernet MACs, USB 2.0 (full-speed), HDLC/TDM support via QUICC Engine, IEEE 1588 v2 hardware time-stamping, and an extended -40C to +105C industrial operating temperature range. The 369-PBGA MAP-BGA package exposes the full peripheral set while keeping the PCB footprint compact. Security, boot, and reset features include secure boot, multiple reset sources, and JTAG boundary scan. The architecture pairs the e300c3 superscalar core with the QUICC Engine block, which contains RISC communication controllers optimized for serial protocol termination. On-chip DDR2 controller supports common industrial memory configurations, while the local bus controller glues to NOR flash, NAND flash, and FPGA/ASIC peripherals. Industrial-grade temperature compliance and a long-life roadmap (when active) make the part suitable for legacy factory automation, telecom edge nodes, and serial concentrator designs. Typical applications include industrial Ethernet gateways, HDLC/TDM line-card controllers, sub-rack telecom equipment, serial-protocol concentrators, secure embedded routers, and legacy industrial control boards. The combination of QUICC Engine, dual Ethernet, and USB also fits retail/POS terminals that need deterministic serial-channel processing alongside IP connectivity. When designing with this device, ensure DDR2 trace lengths follow the NXP reference design layout guide and that the QUICC Engine firmware (RISC microcode) is loaded into the designated memory region during boot. Thermal management is straightforward due to the modest 133 MHz clock and industrial-grade silicon. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
MPC8306SVMABDCA - PowerQUICC II Pro MPU, e300, 133MHz | NXP
MPC8306SVMABDCA

MPC8306SVMABDCA - PowerQUICC II Pro MPU, e300, 133MHz | NXP

The NXP MPC8306SVMABDCA is a PowerQUICC II Pro integrated communications processor based on the e300c3 core built on Power Architecture technology, delivering 133 MHz of single-core 32-bit processing in a 369-ball MAPBGA (19x19 mm) package. It is part of the cost-effective MPC830x communications processor family and integrates QUICC Engine technology capable of supporting HDLC, TDM, and 10/100 R/MII Ethernet interfaces, along with DDR2 memory controller, USB, and IEEE 1588 time-stamping support. A communications MPU (microprocessor unit) is a system-on-chip class device that integrates one or more processor cores with networking peripherals, memory controllers, and connectivity interfaces designed for protocol processing, routing, and embedded control. Within the broader taxonomy, the MPC8306S belongs to the PowerQUICC II Pro lineage of communications processors, which evolved from Freescale's QUICC engine architecture and occupies the niche between microcontrollers and high-end application processors, optimized for wired and industrial communications rather than graphical or compute workloads. Key features include one e300c3 core running at 133 MHz with 32 KB of instruction cache and 32 KB of data cache, a 16-bit DDR2 memory controller up to 333 MHz data rate, dual 10/100 Ethernet MACs with MII/RMII support, a USB 2.0 Full-Speed interface, dual UART, HDLC/TDM interfaces, and JTAG debug support. Power management is handled through multiple power domains and a low-power standby mode. Architecturally, the device combines a PowerPC e300c3 scalar core with a dedicated QUICC Engine RISC co-processor that offloads protocol processing for HDLC, TDM, and Ethernet, allowing deterministic throughput independent of CPU load. The 369-ball MAPBGA exposes the DDR2 controller with ECC, PCI Express (where enabled), USB, MII/RMII, UART, and GPIO, and supports industrial-grade temperature operation up to 105C. Typical applications include industrial routers and gateways, factory automation controllers, DSL and broadband access equipment, networked printers, point-of-sale terminals, and serial-to-Ethernet protocol bridges. The combination of QUICC Engine offload and DDR2 memory makes the part well suited to multi-protocol aggregation where deterministic latency is required. When designing with this part, note that the MPC8306S is the 'S' subset (without IEEE 1588 v2 time stamping present on the full MPC8306), and power sequencing for the DDR2 rail must follow NXP's reference design to avoid latch-up at cold start. Static I/O voltages are 1.8 V / 2.5 V / 3.3 V tolerant, and the core runs from a separate 1.0 V or 1.2 V supply depending on speed grade. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet, enabling faster component selection for communications and industrial designs.

見積もり お問い合わせ
MPC8306VMABDCA - PowerQUICC II Pro SoC, e300, 133MHz | NXP
MPC8306VMABDCA

MPC8306VMABDCA - PowerQUICC II Pro SoC, e300, 133MHz | NXP

The NXP MPC8306VMABDCA is a PowerQUICC II Pro communications SoC integrating a PowerPC e300c3 core running at 133 MHz with a QUICC Engine subsystem, packaged in a 369-ball LFBGA (19x19 mm) and rated 0 to 105 °C. Built on Power Architecture technology, the device targets cost-sensitive wired-communications gateways and industrial control applications. It pairs a 32-bit CPU core with on-chip DDR2 memory controllers and a rich communications peripheral set, eliminating the need for an external protocol processor in many designs. What is a PowerQUICC communications processor? The PowerQUICC family is NXP's (formerly Freescale's) line of Power-Architecture-based system-on-chips that integrate a general-purpose CPU with a hardware protocol offload engine called the QUICC Engine. This category sits within the broader taxonomy of microprocessors -> embedded microprocessors -> communications processors -> SoC. The QUICC Engine handles HDLC, TDM and 10/100 Ethernet MACs (R/MII), letting the CPU focus on application and control-plane tasks instead of bit-banging protocols. Key features include a single 32-bit e300c3 core at 133 MHz, DDR2 memory controller with ECC, dual 10/100 Ethernet MACs with R/MII, USB 2.0 Full-Speed, CAN 2.0, HDLC and TDM time-slot support, an integrated security engine, and IEEE 1588 v2 hardware time stamping on the MPC8306 (versus the MPC8306S, which omits 1588). The part is supplied in a 369-pin LFBGA measuring 19x19 mm and operates from a 0 to 105 °C industrial temperature range. Power is typically delivered through a multi-rail scheme with core, I/O and DDR2 supplies around 1.0 V / 1.8 V / 3.3 V. From an integration standpoint, the device integrates the DDR2 controller, Ethernet MACs, TDM/HDLC channels, USB, CAN, I²C, SPI, UARTs, timers, GPIO, and a DMA engine on a single die. Eliminating a companion protocol chip reduces BOM cost and PCB area, while the QUICC Engine's hardware acceleration preserves CPU bandwidth for routing, security or industrial-protocol stacks. Typical applications include industrial Ethernet gateways, factory-automation PLCs, building-automation controllers, smart-grid concentrators, branch-office routers, VoIP access equipment, and serial-protocol concentrators (HDLC/TDM). The combination of QUICC Engine protocol offload and DDR2 memory makes it suitable for medium-throughput control-plane workloads. A key design consideration is power-rail sequencing: the core, I/O and DDR2 rails must be brought up in the correct order to avoid latch-up. Follow the sequencing and decoupling guidance in the hardware documentation, and ensure the LFBGA PCB layout meets the 19x19 mm BGA escape and thermal-coupling rules. This page consolidates NXP and distributor data, drop-in alternatives, and design notes that streamline evaluation of the MPC8306VMABDCA for new designs and legacy refurbishment alike.

見積もり お問い合わせ
MPC8306VMACDCA - PowerQUICC II Pro SoC 200MHz e300 | NXP
MPC8306VMACDCA

MPC8306VMACDCA - PowerQUICC II Pro SoC 200MHz e300 | NXP

The NXP MPC8306VMACDCA is a PowerQUICC II Pro communications SoC built on Power Architecture technology with an e300c3 core running at 200 MHz, packaged in a 369-ball PBGA (19x19 mm) and rated for 0 to 105C industrial-extended operation. It integrates a 32-bit PowerPC core, DDR2 memory controller, HDLC/TDM time-division controllers, dual Ethernet MACs, USB 2.0, and CAN interfaces on a single die, targeting cost-effective wireline/wireless access and industrial gateway designs. A PowerQUICC II Pro SoC is a system-on-chip that combines a PowerPC host processor with multiple specialized communications peripherals (Ethernet, HDLC, ATM, TDM, USB, CAN) on a single die, allowing one device to replace what would otherwise require a CPU plus separate PHY/controller ICs. The PowerQUICC II Pro family sits within NXP's Power Architecture portfolio, above simple 8/16-bit microcontrollers and below higher-end QorIQ multicore processors, serving the cost-sensitive edge of the communications infrastructure. Key features of the MPC8306VMACDCA include the e300c3 32-bit core at 200 MHz, on-chip DDR1/DDR2 SDRAM controller with 16-bit data width, dual 10/100 Ethernet MACs (one RGMII + one MII/RMII), USB 2.0 Full-Speed host/device, two CAN 2.0 controllers, four HDLC/TDM channels, and a 32-bit PCI interface. Security is provided by a SEC 2.2 accelerator (AES, DES, 3DES, MD5/SHA-1) on the higher-tier MPC8306S variant. The device uses a 32-bit PowerPC Book E instruction set with MMU and 16 KB instruction / 16 KB data L1 caches, while the integrated system interface unit (SIU) handles the 60x-compatible external bus plus PCMCIA/CompactFlash support. This balance of compute, memory bandwidth, and integrated peripherals makes it well suited for low-end routers, industrial controllers, and printed-circuit media gateways that need determinism without multicore complexity. Typical applications include low-cost SOHO routers, integrated access devices (IAD), industrial Ethernet gateways, CAN-based building automation nodes, and serial-protocol protocol converters. The wide peripheral integration reduces external component count, and the 0 to 105C operating range suits outdoor enclosures and industrial cabinets. When designing with the MPC8306VMACDCA, allocate sufficient PCB area to the 369-ball PBGA (19x19 mm, 1 mm pitch) - four to six layers with a continuous ground plane are recommended to keep DDR2 signal integrity intact. Decouple VDD_CORE and VDD_IO rails with 100 nF plus 10 µF ceramic capacitors placed as close to the balls as possible. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
MPC8308CVMADD - PowerQUICC II Pro SoC 266MHz | NXP Semiconductors
MPC8308CVMADD

MPC8308CVMADD - PowerQUICC II Pro SoC 266MHz | NXP Semiconductors

The NXP Semiconductors MPC8308CVMADD is a PowerQUICC II Pro Power Architecture system-on-chip (SoC) integrating an e300c3 core running at 266 MHz, a DDR2 memory controller, one PCI Express interface, dual Gigabit Ethernet MACs, USB 2.0, and a local bus controller in a 473-pin MAPBGA package measuring 19x19 mm. The part is offered in the industrial extended temperature range -40C to +105C, making it qualified for thermally demanding embedded applications. What is a PowerQUICC processor? PowerQUICC (pronounced "power-quick") is NXP/Freescale's long-running family of Power Architecture communications processors that integrate CPU core(s) with networking and peripheral IP. It belongs to the broader class of integrated communications processors (also called networking SoCs or application processors for embedded networking). Within that hierarchy, MPC8308 sits in the PowerQUICC II Pro sub-family alongside the MPC8306, MPC8309, and MPC831x devices, optimized for cost-sensitive and power-sensitive networking endpoints such as home gateways, WLAN access points, and industrial data concentrators. Key features include a 16 KB instruction cache plus 16 KB data cache on the e300c3 core, a 266 MHz DDR2 controller (data rate), one x1 PCI Express Gen1 endpoint/root complex, two 10/100/1000 MACs supporting MII and RGMII, USB 2.0 (host/device), and a flexible local bus controller with NAND flash support. The integrated peripherals eliminate the need for an external bridge chip, reducing both BOM cost and PCB area in customer designs. The MPC8308CVMADD architecture combines the Book-E enhanced Power Architecture core with NXP's QUICC Engine subsystem that handles the networking and DMA offload. This dual-engine partitioning allows the CPU to run control-plane software while the QUICC Engine accelerates packet processing, a classic PowerQUICC design pattern. Typical applications include smart-grid home energy gateways, data concentrators, wireless LAN access points/routers, industrial Ethernet bridges, networked printers, and low-end fanless NAS/print server appliances. The wide temperature range and integrated GbE/PCIe/USB make it well suited to industrial networking equipment. Designers should budget PCB area for the 19x19 mm MAPBGA land pattern, route DDR2 with matched-length traces per the NXP hardware specification, and validate the 266 MHz core/DDR data rate against the software workload's interrupt and DMA latency budgets. Reference schematics and layout checklists are documented in the NXP MPC8308 hardware specification. This page synthesizes distributor stock, lifecycle context, and pin-compatible alternative analysis not found in the manufacturer datasheet alone.

見積もり お問い合わせ