集積回路

サブカテゴリ

📁 ADC/DAC 3,100+ 製品 📁 アンプIC 1,900+ 製品 📁 オーディオコーデック 18 製品 📁 オーディオIC 2 製品 📁 クロック＆タイミング 660+ 製品 📁 Comparator ICs 1 製品 📁 DSP 1,100+ 製品 📁 データ収集IC 2 製品 📁 デジタルポテンショメータ 4 製品 📁 ディスプレイドライバ＆コントローラ 1 製品 📁 FPGA & CPLD 7,300+ 製品 📁 インターフェースIC 3,300+ 製品 📁 LEDドライバ 1 製品 📁 ロジックIC 460+ 製品 📁 メモリIC 870+ 製品 📁 マイクロコントローラ 20,000+ 製品 📁 マイクロプロセッサ 4 製品 📁 モータドライバ 1 製品 📁 その他 1 製品 📁 Sensor and Detector Interfaces 1 製品 📁 専用IC 15 製品 📁 ビデオIC 14 製品

製品 (39,000+)

MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F2011IN

MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

Texas Instruments MSP430F2011IN is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz maximum clock, 2 KB of Flash memory, and 128 bytes of SRAM in a 14-PDIP package. Its operating supply-voltage range is 1.8 V to 3.6 V, while its key power figures include 220 µA active current at 1 MHz and 2.2 V, 0.5 µA standby current, and 0.1 µA off-mode current with RAM retention. A microcontroller is a programmable system-on-chip containing a processor core, nonvolatile program memory, working memory, and peripherals that acquire or control external signals. The MSP430 family follows the hierarchy MCU → embedded microcontroller → mixed-signal microcontroller → semiconductor. Its 16-bit RISC architecture uses 16-bit registers and a constant-memory instruction set optimized for compact control firmware. Five low-power modes and fast standby wake-up make this device especially appropriate for portable, battery-powered measurement systems. The MSP430F2011IN provides integrated timing and analog-comparison resources, including timer functions and a comparator, while its scan interface supports background capture of selected internal signals. The FLL+ frequency-locked loop and maximum 16 MHz operating frequency provide useful processing headroom for sensor acquisition, timing, state-machine control, and low-rate communication. Five power-saving modes allow firmware to reduce energy consumption when continuous CPU execution is unnecessary. The device supports an ultra-low supply-voltage range of 1.8 V to 3.6 V. Its 16-bit RISC core executes instructions with a stated 125 ns instruction-cycle time at the maximum clock frequency. Active-mode current is specified as 220 µA at 1 MHz and 2.2 V, demonstrating that performance can be scaled by clock and operating-state requirements rather than operating continuously at the maximum frequency. Typical uses include portable multimeters, environmental sensors, industrial measurement instruments, battery-powered data loggers, and compact embedded control products. The combination of 2 KB Flash, 128 bytes of SRAM, integrated comparator functions, and standby current of 0.5 µA suits designs that periodically wake, measure, process, and return to a low-power state. Designers should verify startup behavior, pin multiplexing, and application-specific peripheral assignments against the manufacturer datasheet before final PCB release. Because the IN orderable uses a 14-pin through-hole package, breadboarding and hand assembly are straightforward, but its larger footprint is less compact than an equivalent surface-mount implementation. This page combines verified manufacturer and distributor information, practical power-management guidance, package constraints, and same-family replacement context. It also separates published facts from data that still requires device-specific verification, helping engineers plan a qualified MSP430F2011IN design without relying on unverified equivalent parts.

見積もり お問い合わせ
MSP430F2011TN - 16MHz 16-Bit MCU | Texas Instruments | Embedded
MSP430F2011TN

MSP430F2011TN - 16MHz 16-Bit MCU | Texas Instruments | Embedded

The Texas Instruments MSP430F2011TN is a 16-bit mixed-signal microcontroller with a 16 MHz CPU, 2 KB of Flash memory, 128 bytes of SRAM, timer resources, and a comparator in a 14-pin PDIP package. It belongs to the MSP430 ultra-low-power microcontroller family, combining a mixed-signal MCU architecture with integrated comparison capability for compact embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. In the MSP430 family, the 16-bit RISC core is optimized for low-power embedded control, while integrated timers and comparators reduce the need for external components. The MSP430F2011TN therefore sits within the hierarchy of microcontroller, embedded processor, mixed-signal MCU, and semiconductor. The primary verified specifications are a 16 MHz operating frequency, 2 KB of Flash, and 128 bytes of SRAM. The device also includes a timer and comparator, according to the Texas Instruments product page. Its 14-pin PDIP package is intended for conventional through-hole PCB assembly, prototyping, and legacy or industrial control designs where a leaded package simplifies inspection and manual servicing. The MSP430F2011TN uses a 16-bit CPU architecture and combines digital control with analog comparison functions. Although the verified distributor snippet also describes a 2K × 8 organization plus 256 bytes of Flash, the official product summary identifies 2 KB of Flash and 128 bytes of SRAM; engineers should therefore confirm the exact memory map in the manufacturer datasheet before allocating program or data space. Typical uses include low-power sensor nodes, simple control panels, battery-operated instruments, comparator-based threshold circuits, and compact industrial controllers. The comparator can monitor an analog input locally, while the timer supports periodic measurement, timing, or control functions. The 14-pin package is especially suitable where a small through-hole controller is preferred over a fine-pitch surface-mount device. When designing around this MCU, verify the oscillator, reset, I/O, comparator-input, and supply-pin assignments against the exact package drawing before laying out the PCB. Program and data budgets must also be checked because only 2 KB of Flash and 128 bytes of SRAM are available in the verified product summary. Decoupling, reset behavior, and unused-pin handling should follow the manufacturer’s hardware guidelines. This page consolidates verified manufacturer and distributor information, orderable MPN details, price context, drop-in alternatives, and practical selection guidance. It is designed to help engineers identify whether the MSP430F2011TN is suitable for a new embedded design or as a controlled replacement within the 14-pin PDIP MSP430F2011 family.

見積もり お問い合わせ
MSP430F2012IN - 16MHz 2KB Flash 128B SRAM MCU | Texas Instruments
MSP430F2012IN

MSP430F2012IN - 16MHz 2KB Flash 128B SRAM MCU | Texas Instruments

The Texas Instruments MSP430F2012IN is a 16 MHz mixed-signal ultra-low-power microcontroller with 2 KB of Flash memory, 128 B of SRAM, a 10-bit ADC, timer, I2C, and SPI, supplied in a 14-pin PDIP package. It belongs to the MSP430F2xx family of 16-bit RISC microcontrollers designed for low-power embedded measurement, control, and sensor-node applications. The MSP430 architecture is a mixed-signal MCU family in which the CPU, analog conversion, timers, communication peripherals, and low-power modes are integrated for compact instrumented systems. The 16-bit CPU supports efficient interrupt-driven control and deterministic timing, while the integrated 10-bit ADC reduces the need for external analog front-end components in battery-powered measurement designs. Key features of the MSP430F2012IN include a 16 MHz maximum clock rate, 2 KB program Flash, 128 B SRAM, a 10-bit ADC, timer resources, I2C, and SPI. The 14-pin PDIP package is suited to through-hole prototyping, legacy industrial controllers, and designs where a socketed or hand-soldered microcontroller package is more practical than a surface-mount alternative. The MSP430F2012IN is intended for applications such as low-cost sensor nodes, industrial measurement modules, portable instruments, simple motor and actuator controllers, battery-powered monitors, and compact embedded control boards. Its small memory footprint makes firmware design and code size important considerations, while the mixed-signal peripherals simplify designs that require measurement and serial communication. A key design consideration is that the MSP430F2012IN is a small-footprint MCU with limited RAM and Flash. Applications should keep working buffers small, use efficient interrupt routines, and avoid relying on libraries that require substantial memory. A decoupling capacitor should be placed close to the supply pins, and unused inputs should be configured appropriately. This product page combines the verified 16 MHz, 2 KB Flash, 128 B SRAM, 10-bit ADC, timer, I2C, SPI, and 14-pin PDIP information with procurement, comparison, and engineering guidance. It is intended to help engineers confirm fit, plan firmware constraints, and evaluate supply-chain options before designing a new board.

見積もり お問い合わせ
MSP430F2012TN - 16MHz, 2KB Flash Mixed-Signal MCU | TI
MSP430F2012TN

MSP430F2012TN - 16MHz, 2KB Flash Mixed-Signal MCU | TI

The Texas Instruments MSP430F2012TN is a 16-bit mixed-signal microcontroller with a 16 MHz MSP430 CPU, 2 KB Flash memory, 128 B SRAM, a 10-bit ADC, timer, I2C, and SPI in a 14-pin PDIP package. Its compact architecture combines a 16-bit RISC core with mixed-signal peripherals for low-power embedded control, sensor measurement, and compact communication designs. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as analog converters, timers, and serial interfaces. Within the product hierarchy, the MSP430F2012TN is an ultra-low-power mixed-signal microcontroller, also described as a 16-bit MCU. Its MSP430 architecture supports interrupt-driven control, while the integrated analog and communication peripherals reduce the need for external components in cost-sensitive embedded systems. The principal device characteristics include a maximum clock frequency of 16 MHz, 2 KB of Flash program memory, 128 B of SRAM, 10-bit ADC capability, and integrated I2C and SPI interfaces. The device also includes a built-in 16-bit timer and ten I/O pins. Its digitally controlled oscillator allows the MSP430F20xx family to wake from low-power modes to active mode in less than 1 microsecond, which is valuable for intermittent measurement and control systems. The mixed-signal feature set allows the MCU to manage both digital control functions and analog inputs. The 10-bit ADC can serve temperature, potentiometer, light, and other sensor-conditioning systems, while the timer supports periodic sampling, timing, and control functions. I2C and SPI provide paths to external sensors, displays, memories, transceivers, and other digital peripherals without requiring parallel data buses. Typical uses include battery-operated instruments, environmental monitoring, industrial sensing nodes, compact control panels, appliance interfaces, and portable measurement equipment. In these systems, the MSP430F2012TN can sample an analog input, apply decision logic, update an actuator, and communicate results over I2C or SPI. The 14-pin PDIP format is particularly useful for prototypes, educational platforms, and through-hole industrial assemblies where a surface-mount package would be inconvenient. Designers should account for the limited 2 KB Flash and 128 B SRAM when sizing firmware, buffering data, and selecting a development toolchain. External sensing circuitry, decoupling, clock considerations, and serial-interface pull-ups should be evaluated against the system requirements. The exact pin assignments, electrical limits, and peripheral behavior must be confirmed in the Texas Instruments MSP430F20x1, MSP430F20x2, and MSP430F20x3 mixed-signal microcontroller documentation. This page combines the verified manufacturer and distributor specifications with purchasing guidance, application context, same-family drop-in candidates, and practical selection considerations. It also identifies unavailable commercial and pin-level data explicitly so engineers can distinguish confirmed facts from items that require confirmation from the manufacturer documentation.

見積もり お問い合わせ
MSP430F2013IN - 16MHz Ultra-Low-Power 16-Bit MCU | Texas Instruments
MSP430F2013IN

MSP430F2013IN - 16MHz Ultra-Low-Power 16-Bit MCU | Texas Instruments

Texas Instruments MSP430F2013IN is a 16 MHz ultra-low-power mixed-signal microcontroller with a 16-bit RISC CPU, 2KB of Flash memory, 128B of RAM, one 16-bit sigma-delta ADC, and a USI supporting SPI and I2C in a 14-pin PDIP package. It operates from 1.8 V to 3.6 V and is specified for an industrial temperature range of -40°C to 85°C. The 16 MHz clock, 125 ns instruction cycle, and 10 I/O pins make the device suitable for compact embedded measurement and control systems. A mixed-signal microcontroller combines a digital microcontroller core with analog measurement or communication resources. In the product hierarchy, MSP430F2013IN is a 16-bit RISC microcontroller within the MSP430 family and MSP430F2x series. It is designed for portable measurement applications that need low-power operation, flexible serial communication, and direct sensor interfacing without requiring a larger mixed-signal processor. Key device features include 2KB of Flash program memory, 128B of RAM, 10 I/O ports, one 16-bit sigma-delta ADC, and one Universal Serial Interface for SPI or I2C. The MSP430 architecture provides five low-power modes to support battery-powered operation. The FLL+ frequency-locked loop supports controlled clocking, while the USI reduces the number of external communication components required in compact sensor nodes. The device's 16-bit RISC architecture uses 16-bit registers and a 125 ns instruction cycle. At a 16 MHz operating frequency, it provides substantially more processing throughput than lower-rate MSP430 devices while retaining the family's compact and energy-conscious architecture. The sigma-delta ADC supports applications that measure slow-changing analog quantities such as temperature, pressure, light, or resistive sensor outputs. Typical uses include portable environmental monitors, industrial sensor interfaces, low-power data loggers, battery-powered instruments, connected measurement nodes, and embedded control products. The USI can connect to SPI or I2C peripherals, while the ADC can acquire analog sensor signals. Developers can also use timer and general-purpose I/O resources for control signals, status indication, and system coordination. When designing around MSP430F2013IN, prioritize the 1.8 V to 3.6 V supply range and maintain decoupling close to the device. Account for the limited 2KB Flash and 128B RAM budgets during firmware planning. Because the 14-pin PDIP is intended for through-hole assembly rather than high-density automated PCB production, verify connector spacing, mechanical clearances, and rework requirements before committing it to a compact production design. This page consolidates verified manufacturer and distributor information, practical low-power design considerations, application guidance, and drop-in replacement analysis. It distinguishes confirmed specifications from unavailable details, making the MSP430F2013IN easier to evaluate for embedded sensing, serial-interface, and portable industrial-control designs.

見積もり お問い合わせ
MSP430F2013TN - 16MHz Sensing MCU with 16-Bit ADC | TI
MSP430F2013TN

MSP430F2013TN - 16MHz Sensing MCU with 16-Bit ADC | TI

Texas Instruments MSP430F2013TN is a 16 MHz mixed-signal sensing microcontroller with one 16-bit sigma-delta ADC, USI support for SPI and I2C, 2 KB Flash, 128 B RAM, and a 14-pin DIP package. Its 16-bit RISC architecture and 125 ns instruction cycle support efficient embedded measurement and control, while the frequency-locked-loop clock provides a stable operating foundation for precision sensing systems. A mixed-signal microcontroller, or sensing MCU, integrates digital processing with analog measurement resources on one device. The MSP430F2013 belongs to the MSP430 family of ultra-low-power embedded controllers, combining a 16-bit RISC CPU, mixed-signal peripherals, and low-power operating modes. This hierarchy places it below general-purpose processing and above compact embedded sensing platforms used for instrumentation, metering, control, and communication-assisted measurement. The primary mixed-signal feature is one 16-bit sigma-delta ADC, which is appropriate for slowly varying or heavily filtered sensor signals where fine resolution is more important than very high conversion speed. The universal serial interface provides SPI and I2C connectivity for external sensors, memories, and peripheral devices. Two kilobytes of Flash preserve firmware and configuration data, while 128 bytes of RAM support working state in space-constrained designs. The MSP430 CPU16 provides 16-bit processing, and the 125 ns instruction cycle corresponds to a 16 MHz operating frequency. A frequency-locked loop, or FLL+, supports clocking in low-power embedded designs, while the device can wake from standby in less than 6 microseconds. Multiple power-saving modes, including a 0.1 microamp off mode with RAM retention, help reduce energy consumption between measurement and communication activities. Typical uses include low-cost sensor nodes, industrial measurement modules, portable instrumentation, and connected sensing products. The sigma-delta ADC suits resistive, temperature, and slow analog-front-end signals, while the USI allows compact designs using either serial protocol. Designers can pair the MCU with external signal conditioning when the source requires filtering, excitation, or a differential input arrangement. The primary design consideration is power-rail and clock configuration. The available verified data does not state the recommended operating voltage range, so supply selection must be completed from the manufacturer datasheet rather than inferred. Decoupling, ADC input conditioning, and USI bus implementation also require care to prevent measurement noise or communication timing problems. This product record combines verified manufacturer and distributor information, price and availability context, strict drop-in replacement analysis, and practical application guidance. It clearly separates confirmed specifications from parameters that still require datasheet verification, helping engineers make a faster and more reliable design decision.

見積もり お問い合わせ
MSP430F2132CY - 16MHz 16-Bit MCU with 8KB Flash | Texas Instruments
MSP430F2132CY

MSP430F2132CY - 16MHz 16-Bit MCU with 8KB Flash | Texas Instruments

Texas Instruments MSP430F2132CY is a 16-bit ultra-low-power mixed-signal microcontroller built around a 16 MHz MSP430 RISC core, with 8KB of Flash memory and 512 bytes of SRAM. The device also provides a 10-bit ADC, analog comparator, and communication peripherals including I2C, SPI, and UART. The MSP430F2132CY ordering code is offered as a die-sale product, so the verified ordering information does not identify a conventional leaded or surface-mount package for this specific suffix. An ultra-low-power microcontroller is an embedded processing IC designed to balance compute capability, analog measurement, serial communications, and energy efficiency. The MSP430F2132 belongs to the MSP430 family, whose hierarchy is MSP430 mixed-signal microcontroller, RISC microcontroller, embedded microcontroller, and semiconductor. Its architecture is intended for portable measurement and control products that require more than simple digital I/O but benefit from compact code, built-in analog conversion, and multiple low-power operating modes. The principal device parameters include a 16-bit CPU operating at up to 16 MHz, 8KB of Flash memory, 512B of SRAM, a 10-bit ADC, and an analog comparator. The integrated communication capability covers I2C, SPI, and UART, allowing the MCU to connect sensors, displays, transceivers, and external data-acquisition hardware without requiring separate interface controllers. The MSP430 architecture also provides dedicated handling for timed capture, timing, and mixed-signal measurement tasks common in portable instruments. The MSP430F2132 family is suitable for battery-powered measurement, industrial sensing, building-control equipment, compact instrumentation, and connected low-power nodes. An ADC and comparator can share the same silicon with the digital core, reducing board area in designs that measure an analog quantity and then communicate the result. The 8KB Flash capacity provides a defined code-storage budget, while 512B of SRAM supports working state, stack, buffers, and peripheral data handling. Because MSP430F2132CY is supplied as a die-sale product, engineers should confirm die orientation, bonding requirements, assembly process, exposed features, quality requirements, and production handling directly with Texas Instruments before committing the device to a PCB or automated assembly flow. The CY ordering suffix should not be interpreted as a finished package designation. This page consolidates verified manufacturer and distributor information, current price breaks, technical specifications, and purchasing guidance for MSP430F2132CY. It also identifies where package, pinout, compliance, and exact substitute data remain unavailable so engineers can avoid treating unverified package or cross-reference assumptions as production facts.

見積もり お問い合わせ
MSP430F233TPM - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F233TPM

MSP430F233TPM - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

Texas Instruments MSP430F233TPM is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz MSP430 RISC CPU, 8 KB Flash memory, 1 KB SRAM, a 12-bit ADC, comparator, hardware multiplier, and I2C, SPI, and UART connectivity. The device operates from a 1.8 V to 3.6 V supply and is housed in a 64-pin LQFP (PM) package for industrial, embedded, IoT, metering, motor-control, and portable measurement applications. A microcontroller is a compact embedded-computer system that combines a CPU, memory, peripheral interfaces, and power-management functions on one integrated circuit. The MSP430 belongs to the mixed-signal microcontroller category, which extends the general embedded MCU hierarchy with analog conversion and comparison functions. Its 16-bit RISC architecture uses 16-bit registers and constant generators, while five low-power modes and fast standby wake-up support battery-powered and energy-conscious designs. The MSP430F233 combines 8 KB Flash with 1 KB SRAM and a maximum clock frequency of 16 MHz. Its 12-bit ADC enables analog measurement, and the integrated comparator supports thresholding and basic signal conditioning. Four USCI modules provide serial connectivity for I2C, SPI, and UART configurations. Two 16-bit timers support timing, capture, compare, and periodic event generation, making the device useful for sensor acquisition, industrial control, and compact embedded measurement systems. The MSP430F23x family is designed around a mixed-signal architecture and low-power operation. The FLL+ frequency-locked-loop system supports clock control, while the CPU provides a 125 ns instruction cycle at 16 MHz according to the family technical description. The device can operate across multiple low-power states, including standby and RAM-retention off modes, allowing firmware to reduce activity when the application does not require continuous processing. Typical uses include low-power sensor nodes, battery-operated instrumentation, industrial meters, building-control endpoints, compact motor-control interfaces, and connected IoT devices. The 12-bit ADC is useful for battery, temperature, potentiometer, and analog sensor interfaces, while USCI peripherals simplify communication with external sensors, displays, transceivers, and data loggers. The LQFP package provides accessible leads and is suitable for through-hole assembly or conventional board-level manufacturing processes. Designers should pay attention to the 1.8 V to 3.6 V supply range, peripheral pin multiplexing, clock configuration, and low-power state transitions. Place decoupling capacitors close to the supply pins, follow the pin-description table in the manufacturer datasheet when allocating I/O, and confirm the ADC input range and accuracy requirements for the selected operating conditions. For battery systems, account for standby and wake-up current alongside active-mode consumption. This product page combines manufacturer device information, verified distributor listings, package and ordering details, application guidance, comparison parameters, and practical design notes. It is intended to help engineers identify the correct MSP430F233TPM configuration, plan PCB and firmware changes, and assess replacement options without overlooking the distinction between electrical equivalence and true pin-to-pin drop-in compatibility.

見積もり お問い合わせ
MSP430F235TPM - 16MHz Mixed-Signal MCU | Texas Instruments
MSP430F235TPM

MSP430F235TPM - 16MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F235TPM is a 16 MHz mixed-signal microcontroller with 16 KB of Flash memory, 512 bytes of SRAM, a 10-bit ADC, two operational amplifiers, and I2C, SPI, and UART connectivity in a 64-LQFP package. Its 16-bit RISC architecture, constant generators, and 125 ns instruction cycle support efficient control and sensor-processing workloads. A mixed-signal microcontroller combines a digital processor with analog conversion and conditioning functions on one device. The MSP430 architecture belongs to the microcontroller, embedded processor, and power-management IC hierarchy, integrating real-time control, communications, and analog measurement while reducing the number of discrete components required in an embedded system. The MSP430F235TPM operates at up to 16 MHz and provides 16 KB of Flash for program storage plus 512 bytes of SRAM for working memory. Its integrated 10-bit ADC and two operational amplifiers support mixed-signal designs that need to acquire, condition, and process sensor data. Peripheral support includes I2C, SPI, and UART interfaces for connecting displays, sensors, transceivers, and external data-acquisition equipment. The device includes five power-saving modes and can wake from standby in less than 6 microseconds, according to the supplied Texas Instruments documentation. This combination of rapid wake-up and low-power operation supports systems that spend most of their time inactive but must respond quickly to external events. Its FLL+ frequency-locked loop provides clocking support for mixed-signal embedded systems. Typical uses include industrial sensor nodes, compact data-acquisition systems, low-power instrumentation, and communication-connected embedded controls. The I2C and SPI interfaces support short-distance peripheral connections, while UART provides a straightforward serial path for configuration, logging, or supervisory communication. The integrated ADC and amplifiers are particularly relevant to designs in which analog conditioning must coexist with digital control. When planning the PCB, use the 64-LQFP footprint and follow the manufacturer pin and layout guidance before assigning analog, digital, power, and ground pins. Account for ADC noise, analog grounding, supply decoupling, clock stability, and programming access. Confirm the exact peripheral configuration and pin multiplexing in the manufacturer datasheet because the supplied search results summarize the device but do not expose the complete pin table. This product record combines verified manufacturer and distributor information with procurement data, package details, application guidance, and same-family replacement candidates. It provides a practical engineering summary for engineers evaluating the MSP430F235TPM for low-power mixed-signal embedded designs, while clearly identifying detailed parameters that require confirmation in the full manufacturer datasheet.

見積もり お問い合わせ
MSP430F247TPM - 16MHz 32KB Flash MCU | Texas Instruments
MSP430F247TPM

MSP430F247TPM - 16MHz 32KB Flash MCU | Texas Instruments

Texas Instruments MSP430F247TPM is a 16-bit mixed-signal microcontroller built around the MSP430 RISC CPU and designed for low-power embedded measurement and control systems. The device operates at 16 MHz, provides 32 KB of Flash memory, includes 4 KB of SRAM according to the manufacturer product-page data, and is offered in a 64-LQFP package measuring 10 mm by 10 mm. The integrated feature set includes a 12-bit ADC, comparator, I2C, SPI, UART, and hardware multiplier. A microcontroller is a programmable semiconductor that combines a CPU, memory, and peripherals in one device. The MSP430 belongs to the 16-bit RISC microcontroller category within the embedded-processor and embedded-controller hierarchy. Its architecture uses 16-bit registers and constant generators to improve code efficiency, while its peripheral mix supports designs that must acquire analog signals and communicate with sensors, displays, actuators, and external controllers while conserving energy. The MSP430F247TPM combines a 16 MHz processing rate with 32 KB of Flash and 4 KB of SRAM. The 12-bit ADC is useful for analog measurement channels, the comparator supports threshold and signal-conditioning functions, and the hardware multiplier accelerates multiplication-heavy operations. Serial connectivity includes I2C, SPI, and UART, allowing the MCU to interface with sensors, memory, transceivers, and industrial equipment. The manufacturer describes the MSP430 family as ultra-low-power and optimized for extended battery life in portable measurement applications. Five low-power modes are identified in the verified Texas Instruments product-page information. Their practical value is the ability to reduce activity when the application does not need continuous processing, helping conserve energy in battery-operated instruments. The 64-LQFP package provides a conventional surface-mount format with exposed leads and a 10 mm by 10 mm body, suitable for automated PCB assembly and moderate pin-count designs. Typical uses include portable environmental monitoring, industrial sensing, building-control equipment, battery-powered instruments, and connected measurement modules. In these systems, the ADC can acquire sensor outputs, the comparator can provide fast threshold detection, and the UART, SPI, or I2C interface can connect external sensors or communications peripherals. Firmware should be selected for the specific MSP430F247 variant and validated against the manufacturer device documentation. For a new design, verify the exact supply-voltage limits, ADC performance, pin multiplexing, timing requirements, and absolute maximum ratings in the MSP430F247 documentation. Programming and debugging must also use a toolchain and target configuration compatible with the MSP430 family. The verified distributor data identifies the MSP430F247TPM as a tray-packaged 64-LQFP device; the tape-and-reel suffix MSP430F247TPMR is a different orderable suffix rather than a distinct functional alternative. This product summary combines verified manufacturer characteristics, distributor availability information, family cross-reference results, and practical selection guidance. It distinguishes electrical and functional drop-in candidates from packaging-only order codes and highlights where an engineer must review the datasheet before making a PCB or firmware substitution.

見積もり お問い合わせ
MSP430F248TPM - 16MHz 48KB MCU 12-bit ADC | Texas Instruments
MSP430F248TPM

MSP430F248TPM - 16MHz 48KB MCU 12-bit ADC | Texas Instruments

The Texas Instruments MSP430F248TPM is a 16 MHz ultra-low-power mixed-signal microcontroller with 48 KB Flash, 4 KB SRAM, a 12-bit ADC, comparator, I2C/SPI/UART, and hardware multiplier in a 64-pin LQFP (PM) package. A mixed-signal microcontroller combines a general-purpose CPU with analog measurement and communication peripherals. The MSP430 belongs to the RISC MCU -> low-power microcontroller -> embedded semiconductor hierarchy, targeting portable, industrial, and instrumented systems that need deterministic control, low standby current, and fast wake-up. The verified device features include a 16 MHz maximum CPU frequency, 16-bit RISC architecture, 48 KB Flash plus 256 bytes, 4 KB SRAM, 12-bit ADC, comparator, two USCI peripherals supporting I2C, SPI, and UART, and a hardware multiplier. The supply-voltage range shown in the verified datasheet references is 1.8 V to 3.6 V. Its low-power operating modes are central to the design: the verified data cites 270 µA active current at 1 MHz and 2.2 V, 0.3 µA standby current using VLO, 0.1 µA off current with RAM retention, and standby wake-up in less than 1 µs. These figures make the device suitable for duty-cycled sensing systems where average energy matters more than uninterrupted processing. Typical uses include low-power sensor acquisition, battery-operated instrumentation, industrial control, communications bridges, and embedded measurement nodes. The ADC and comparator support analog front-end conditioning, while the USCI interfaces connect displays, sensors, transceivers, and external data storage. Designers should select decoupling, clock, and peripheral connections according to the manufacturer datasheet and verify all unused pins. Because the verified source identifies a 64-pin LQFP, PCB design should use a 64-pin-compatible footprint and preserve the exposed thermal behavior and recommended layout. This page combines the verified manufacturer and distributor references with practical selection guidance, application context, and explicit data gaps where the supplied sources do not provide a complete value.

見積もり お問い合わせ
MSP430F249TPM - 16MHz, 60KB Flash RISC MCU | Texas Instruments
MSP430F249TPM

MSP430F249TPM - 16MHz, 60KB Flash RISC MCU | Texas Instruments

The Texas Instruments MSP430F249TPM is a 16-bit ultra-low-power RISC microcontroller operating up to 16 MHz, with 60 KB of Flash memory, 2 KB of SRAM, and a 64-pin LQFP package. The device integrates a 12-bit ADC, comparator, I2C/SPI/UART communication peripherals, and a hardware multiplier for mixed-signal and portable measurement applications. A microcontroller is a programmable system-on-chip that executes firmware, reads sensors, controls outputs, and manages communications. The MSP430 belongs to the mixed-signal microcontroller hierarchy and combines a 16-bit RISC CPU with analog peripherals and low-power modes. Its architecture is designed for battery-powered instruments where efficient standby operation and rapid wake-up help extend operating time. Key features include a 16-bit CPU with 16-bit registers, 60 KB Flash, 2 KB SRAM, a 12-bit ADC, a comparator, communication interfaces supporting I2C, SPI, and UART, and a hardware multiplier. The 16 MHz maximum clock supports responsive control and signal-processing workloads while the low-power design remains suitable for portable measurement systems. The manufacturer lists the MSP430F249 as an ultra-low-power device with multiple low-power modes. The mixed-signal architecture allows digital control and analog measurement to share one device, reducing component count in sensor nodes and industrial instruments. The ADC supports measurement channels while the comparator can support threshold and signal-monitoring functions. Serial interfaces allow connection to sensors, displays, transceivers, and external data converters without requiring multiple dedicated interface devices. Typical uses include battery-powered data loggers, handheld meters, industrial monitoring nodes, environmental sensing, portable medical equipment, and embedded measurement systems. Designers should verify the exact pin functions, operating voltage, peripheral limits, and timing requirements against the manufacturer datasheet before final PCB release. For low-power designs, activate the appropriate sleep mode when the acquisition and communication schedule allows it, then use the device’s wake-up behavior to resume processing. Place decoupling capacitors close to the supply pins and route high-current and sensitive analog signals away from switching nodes. This page combines distributor availability, manufacturer specifications, replacement analysis, and practical design guidance for engineers evaluating the MSP430F249TPM. The verified distributor listing identifies the MSP430F249TPM as a 16-bit, 16 MHz MSP430F2xx microcontroller with 60 KB Flash and a 64-LQFP package. The Texas Instruments product page additionally identifies 2 KB SRAM, a 12-bit ADC, comparator, I2C/SPI/UART, and hardware multiplier features.

見積もり お問い合わせ
MSP430F2618TPM - 16MHz 16-Bit MCU 116KB Flash | Texas Instruments
MSP430F2618TPM

MSP430F2618TPM - 16MHz 16-Bit MCU 116KB Flash | Texas Instruments

The Texas Instruments MSP430F2618TPM is a 16-bit mixed-signal microcontroller with a 16 MHz CPU, 116 KB of flash memory, 8 KB of SRAM, and a 64-LQFP 10 x 10 mm package. It integrates a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, a hardware multiplier, and DMA, making it suitable for low-power embedded measurement, industrial control, and portable instrument applications. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and five low-power modes optimized for extended battery life in portable measurement systems. A mixed-signal microcontroller combines digital control logic with analog conversion and communication peripherals on one device. In the MSP430 family, the CPU, memory, ADC, DAC, serial interfaces, and low-power hardware are integrated into a compact package. This reduces component count and simplifies firmware-driven sensing and control compared with separate microcontroller, converter, and interface devices. The MSP430F2618TPM is therefore positioned between general-purpose control and dedicated signal-processing applications. The device operates from a 2.2 V to 3.6 V supply and provides 64 I/O ports according to the product listing. Its 16 MHz maximum clock supports deterministic control loops and efficient processing of sampled data. The 116 KB flash memory provides 116K x 8 storage plus 256 bytes, while 8 KB of SRAM supports working data, stack space, and buffered acquisition results. A hardware multiplier accelerates multiply operations, and DMA reduces CPU involvement during peripheral transfers. The integrated 12-bit ADC supports analog measurement, and the dual 12-bit DAC supports programmable analog output for control, excitation, signal generation, or test systems. I2C and SPI suit sensor and peripheral expansion, while UART supports serial communication with host systems, debug tools, or industrial equipment. These peripherals make the MCU useful for sensor acquisition, industrial instrumentation, data loggers, portable measurement equipment, and embedded control panels. The main design consideration is power management. The MSP430 offers multiple low-power operating states, so firmware can remain in a low-current state between measurements and activate the CPU and peripherals only when data is required. Keep the supply within 2.2 V to 3.6 V, observe the recommended decoupling and analog-layout practices in the manufacturer datasheet, and verify the exact pin assignment and peripheral multiplexing for the LQFP-64 footprint before layout release. This product page combines the manufacturer’s core device description, verified distributor specifications, package information, practical design guidance, and clearly qualified replacement considerations for engineers evaluating MSP430F2618TPM-based designs.

見積もり お問い合わせ
MSP430F412IPM - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F412IPM

MSP430F412IPM - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

Texas Instruments MSP430F412IPM is an 8 MHz, 16-bit ultra-low-power RISC microcontroller with 4 KB Flash, 256 bytes SRAM, a timer, comparator, and a 96-segment LCD controller in a 64-pin LQFP package. The MSP430 combines a 16-bit CPU, 16-bit registers, and a 125 ns minimum instruction cycle with five low-power modes optimized for portable measurement and battery-powered systems. A microcontroller is a programmable embedded-control component that integrates a CPU, memory, peripherals, and interface logic on one semiconductor die. The MSP430 family belongs to the embedded processor and microcontroller hierarchy. Compared with general-purpose 8-bit or 32-bit processors, this device emphasizes deterministic RISC execution, compact code size, energy-efficient operation, and mixed-signal peripheral integration for low-power measurement applications. The MSP430F412IPM provides 4 KB of Flash and 256 bytes of SRAM, an 8 MHz maximum clock, a 16-bit Timer_A, a comparator, and LCD segment support for as many as 96 segments. According to the Texas Instruments product page, the device is aimed at portable measurement applications in which five low-power modes and a 16-bit RISC architecture help extend battery life. The 64-pin LQFP package also provides access to its expanded display and mixed-signal interface pins. Its architecture is designed around low-power embedded control rather than high-throughput application processing. A 125 ns instruction cycle corresponds to a maximum 8 MHz operating frequency. The peripheral mix supports periodic sensing, timing, threshold comparison, and segmented-display output without requiring separate logic devices. Exact operating current, voltage range, and individual timer-channel details were not included in the supplied web extracts and should therefore be confirmed in the manufacturer datasheet before design release. Typical uses include handheld meters, portable industrial probes, low-power environmental sensors, compact instrument panels, and battery-operated measurement instruments. The 96-segment LCD capability is especially useful where a numeric or alphanumeric local display improves usability. The comparator can support threshold detection, while Timer_A provides periodic measurement or control functions. Firmware and board design should confirm that the selected measurement front end, display glass, and power architecture are compatible with the device's specified limits. The primary design consideration is matching the MCU's limited 4 KB Flash and 256 bytes SRAM to the application code while preserving low-power behavior. Keep periodic sensing and display updates event-driven, use the device's low-power states where measurement timing permits, and validate analog signal conditioning around the comparator. Exact pin names, voltage ratings, current limits, and LCD segment mapping must be taken from the official MSP430F412 documentation rather than inferred from the package outline.

見積もり お問い合わせ
MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments
MSP430F413IPM

MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

Texas Instruments MSP430F413IPM is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz operating frequency, 8 KB Flash memory, 256 bytes of SRAM, and a 64-pin LQFP package. Its integrated 96-segment LCD driver, comparator, timer, and 48 I/O pins target compact battery-powered measurement instruments that require local display and analog signal conditioning. An ultra-low-power microcontroller is a semiconductor device optimized to complete control tasks while consuming minimal energy. The MSP430 architecture belongs to the mixed-signal MCU hierarchy, combining a 16-bit RISC CPU, embedded Flash and SRAM, analog comparison, timing resources, and low-power operating modes. Its role in a measurement system is to acquire sensor information, process it locally, drive an LCD, and transmit results while preserving battery life. Key features include 8 KB of Flash, 256 bytes of SRAM, a maximum clock frequency of 8 MHz, and 96 LCD segment outputs. The device operates from 1.8 V to 3.6 V and provides five low-power modes. According to the family documentation, active current is 200 µA at 1 MHz and 2.2 V, standby current is 0.7 µA, and off-mode current with RAM retention is 0.1 µA. Standby wake-up time is less than 6 µs. The MSP430x41x architecture uses 16-bit registers and a 16-bit RISC CPU optimized for efficient control operations. A frequency-locked loop supports controlled clock generation, while the comparator and timer resources support threshold detection, periodic events, and sensor-interface timing. The 48 available I/O pins and 96-segment LCD capability allow a single device to replace separate display drivers and interface logic in metering equipment. Typical applications include handheld multimeters, industrial meters, portable environmental monitors, medical measurement instruments, and energy-monitoring products. The MCU is particularly suitable where a numeric or segment display, low standby power, and deterministic control response must coexist in a compact board area. Its 64-pin LQFP package also provides more interface and LCD routing options than smaller MCU packages. When designing around the MSP430F413IPM, preserve the manufacturer's recommended decoupling and LCD bias arrangements, and validate timing against the slowest expected input signal. Check the I/O voltage domain against the selected 1.8 V or 3.3 V operating condition. For battery-powered products, include the display load and sensor leakage in the standby-current budget rather than relying only on the MCU current figure. This product overview combines the exact ordering information, electrical characteristics, low-power capabilities, application guidance, and package constraints needed to plan an MSP430F413IPM-based design and determine whether a pin-compatible family alternative is appropriate.

見積もり お問い合わせ
MSP430F413IPMR - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F413IPMR

MSP430F413IPMR - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

The Texas Instruments MSP430F413IPMR is an ultra-low-power 16-bit RISC microcontroller operating at 8 MHz, with 8 KB of Flash memory, 256 bytes of SRAM, and a 64-pin LQFP package. It includes 48 I/O ports, a timer, a comparator, and support for a 96-segment LCD display. The MSP430F413IPMR is designed for industrial, battery-powered, and portable measurement applications where low standby current and rapid wake-up behavior are important. An ultra-low-power microcontroller is a semiconductor designed to complete system tasks while minimizing energy use. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, constant-memory instructions, and five low-power modes to support portable measurement systems. Within the product hierarchy, the MSP430F413IPMR is a mixed-signal microcontroller combining embedded Flash, SRAM, general-purpose I/O, timing, comparison, and LCD-drive functions in one package. The device operates from a 2.7 V to 3.6 V supply and is rated for an industrial temperature range of -40 °C to 85 °C. Its 8 MHz maximum clock speed provides useful processing performance for sensor acquisition, control logic, and low-rate communications, while the 96-segment LCD capability can reduce the need for external display controllers. Five power-saving modes allow firmware to balance response time against battery consumption during intermittent operation. The 64-pin LQFP package exposes 48 I/O ports alongside power, clock, reset, analog, and LCD-related connections. This integration is valuable in handheld instruments, industrial panel meters, and compact sensor interfaces because one device can collect measurements, perform control calculations, and drive a local display. The manufacturer describes the MSP430 family as optimized for extended battery life in portable measurement applications. For new designs, engineers should review the MSP430F413 datasheet and device pin-description table before assigning every LQFP connection. Battery calculations should include both active-mode current and standby current under the intended clock, display, comparator, and peripheral conditions. Firmware should use the documented low-power-mode entry and wake-up sequence rather than relying on a generic sleep procedure. This product page combines the manufacturer specifications with practical guidance for portable instrumentation, LCD-based measurement products, low-power sensor nodes, and industrial control panels. It also explains the constraints involved when considering a drop-in replacement, including package, memory, peripheral, temperature-grade, and pin-function compatibility.

見積もり お問い合わせ
MSP430F415IPM - 8MHz 16-Bit MCU with 16KB Flash | Texas Instruments
MSP430F415IPM

MSP430F415IPM - 8MHz 16-Bit MCU with 16KB Flash | Texas Instruments

The Texas Instruments MSP430F415IPM is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz CPU, 16 KB of Flash memory, 512 bytes of SRAM, 48 I/O ports, and a 96-segment LCD driver in a 64-LQFP 10 x 10 mm package. It operates from a 2.7 V to 3.6 V supply and targets industrial measurement, metering, control, and portable instrument applications. An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while minimizing energy consumption during active operation and idle periods. The MSP430 architecture belongs to the embedded microcontroller hierarchy and combines a 16-bit RISC CPU, 16-bit registers, constant-memory instruction execution, and five low-power operating modes. These characteristics make it useful where battery life, deterministic control, and compact peripheral integration are more important than high processor throughput. The MSP430F415IPM provides 16 KB of Flash for firmware, 512 bytes of SRAM for working data, a timer, a comparator, and a 96-segment LCD driver. Its 48 I/O pins support external sensing, control, and display interfaces. The 8 MHz maximum clock provides processing headroom for measurement and control tasks, while the integrated LCD and analog comparison functions can reduce the component count in handheld meters and industrial panel instruments. Five low-power modes support battery-conscious operation, and the manufacturer describes the architecture as optimized for extended battery life in portable measurement applications. The mixed-signal feature set allows software to process digital control functions alongside analog comparisons. According to the Texas Instruments product information, the device combines a powerful 16-bit RISC CPU with 16-bit registers and constant-memory execution, providing a compact platform for embedded signal acquisition and user-interface control. Typical uses include utility meters, industrial measurement panels, portable data loggers, handheld testers, sensor-conditioning systems, and low-power control boards. The 96-segment LCD capability is especially useful in devices that need a numeric or segmented display without requiring a graphical LCD controller. The 48 available I/O ports also allow designers to connect sensors, switches, relays, and communication peripherals while retaining local processing capability. Designers should verify the complete 64-pin signal assignment against the manufacturer datasheet and keep decoupling close to the power pins. Because the MCU operates from 2.7 V to 3.6 V, external sensors and interface circuits must use compatible voltage levels or appropriate level translation. Low-power performance also depends on firmware, because interrupt-driven sleep modes and peripheral clock control usually determine the final battery life. This page consolidates verified manufacturer and distributor information, distinguishes documented specifications from unavailable data, and provides application guidance and drop-in alternatives for engineers evaluating the MSP430F415IPM.

見積もり お問い合わせ
MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI
MSP430F417IPM

MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

The Texas Instruments MSP430F417IPM is a 16-bit ultra-low-power mixed-signal microcontroller based on the MSP430x4xx CPU16 core, delivering 8 MHz performance with a 125 ns instruction cycle time, packaged in a 64-pin LQFP (PM, 10x10 mm). The device integrates 32 KB of Flash memory (32K x 8 + 256B), 1 KB of SRAM, a 96-segment LCD driver, a 16-bit timer, an analog comparator, and a Frequency-Locked Loop (FLL+). It operates from 1.8 V to 3.6 V, making it well suited for battery-powered applications. What is a mixed-signal microcontroller? It is a single-chip IC that combines an analog frontend with a digital microcontroller on one die. Within the broader taxonomy, the MSP430F417 is a microcontroller (MCU) -> 16-bit MCU -> ultra-low-power MCU -> mixed-signal MCU. These devices sit at the node between sensing (analog) and decision-making (digital), eliminating the need for a separate ADC, LCD driver, or comparator chip on the board. Key features include ultra-low-power consumption with active mode at 200 µA at 1 MHz and 2.2 V, standby mode of 0.7 µA, and off-mode (RAM retention) of 0.1 µA. Five power-saving modes and a wake-up time from standby of less than 6 µs allow the device to spend most of its life in deep sleep, extending battery life in portable measurement applications. The integrated LCD driver supports up to 96 segments, enabling direct connection to a glass LCD without an external charge pump or driver IC. The MSP430F417 architecture combines a 16-bit RISC CPU with 16-bit registers and constant generators, achieving maximum code efficiency in dense applications. The Scan Interface (Scan IF) module supports background diagnostics on analog sensor arrays without CPU intervention, while the FLL+ stabilizes the system clock across voltage and temperature variations. The 48 GPIO pins provide flexible peripheral routing. Typical applications include portable medical devices such as glucose meters and blood pressure monitors, battery-powered industrial sensor transmitters, electronic metering (electricity, gas, water), low-cost thermostats, and any product requiring an integrated glass LCD with multi-year battery life. The wide operating voltage range and ultra-low standby current also make the part attractive for energy-harvesting designs. Designers should note that the FLL+ reference must be selected from the internal REFO or an external 32.768 kHz crystal; bypassing this step can lead to unstable MCLK at startup. Programming is supported through TI's JTAG or Spy-Bi-Wire interface, and Code Composer Studio or IAR Embedded Workbench may be used for firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the TI product page, with parametric tables drawn from the manufacturer datasheet.

見積もり お問い合わせ
MSP430F423IPM - 8MHz 16-Bit MCU with 3 ADCs | Texas Instruments
MSP430F423IPM

MSP430F423IPM - 8MHz 16-Bit MCU with 3 ADCs | Texas Instruments

Texas Instruments MSP430F423IPM is an 8 MHz, 16-bit mixed-signal microcontroller with three 16-bit sigma-delta ADCs, a 128-segment LCD interface, 8 KB Flash memory, 256 B RAM, and 48 I/O ports in a 64-LQFP 10x10 mm package. Designed for low-power sensing and measurement systems, it combines a 16-bit RISC CPU, frequency-locked-loop clocking, low-power operating modes, and LCD drive capability in one integrated device. A mixed-signal microcontroller is an embedded-control IC that combines a digital processor with analog or specialized sensing peripherals. In the broader electronics hierarchy, MSP430F423IPM belongs to the microcontroller class, then embedded processors, then semiconductor devices. Its integrated ADC channels reduce external signal-chain requirements, while the LCD interface supports compact instrumentation, metering, portable measurement, and industrial control panels. Key features include an 8 MHz maximum clock, three 16-bit sigma-delta ADCs, 8 KB Flash, 256 B RAM, 48 I/O ports, and a 2.7 V to 3.6 V supply range. The device also provides five power-saving modes, standby wake-up in less than 6 microseconds according to the verified distributor data, and a frequency-locked loop. These features support designs that need deterministic embedded control while limiting energy use during inactive periods. The MSP430 CPU16 uses a 16-bit RISC architecture with a stated 125 ns instruction-cycle time. Its mixed-signal peripherals are intended for sensors and low-bandwidth analog measurements where a sigma-delta ADC is appropriate. The integrated 128-segment LCD support is especially useful for meter, sensor, and handheld-instrument designs that need local numeric or graphical feedback without a separate display controller. Typical applications include low-power sensor nodes, industrial panel meters, portable measurement equipment, environmental monitoring, battery-powered instruments, and LCD-based control interfaces. The 48 I/O ports provide flexibility for external sensors, switches, indicators, communication interfaces, and actuators. The 2.7 V to 3.6 V operating supply range aligns the MCU with common 3.3 V embedded systems, while the 8 MHz clock supports control-loop and measurement-management tasks. For PCB design, preserve the package pin assignments and follow the manufacturer datasheet for decoupling, analog routing, LCD drive connections, and exposed or unused-pin treatment. Treat ADC signal conditioning, reference stability, and low-power transition sequencing as important validation points. Because the verified data does not provide a complete pin-level table, do not infer pin names from package position alone. This page combines the verified manufacturer product data, distributor specifications, lifecycle information, and practical application guidance. It also distinguishes verified facts from missing parameters and avoids presenting unverified electrical, pricing, or pinout values as datasheet specifications.

見積もり お問い合わせ
MSP430F423IPMR - 8MHz 16-Bit MCU with 3 ADCs | Texas Instruments (Tape & Reel)
MSP430F423IPMR

MSP430F423IPMR - 8MHz 16-Bit MCU with 3 ADCs | Texas Instruments (Tape & Reel)

Texas Instruments MSP430F423IPMR is an 8 MHz, 16-bit mixed-signal microcontroller with three 16-bit sigma-delta ADCs, a 128-segment LCD interface, 8 KB Flash memory, 256 B RAM, and 48 I/O ports in a 64-LQFP 10x10 mm package. Designed for low-power sensing and measurement systems, it combines a 16-bit RISC CPU, frequency-locked-loop clocking, low-power operating modes, and LCD drive capability in one integrated device. A mixed-signal microcontroller is an embedded-control IC that combines a digital processor with analog or specialized sensing peripherals. In the broader electronics hierarchy, MSP430F423IPMR belongs to the microcontroller class, then embedded processors, then semiconductor devices. Its integrated ADC channels reduce external signal-chain requirements, while the LCD interface supports compact instrumentation, metering, portable measurement, and industrial control panels. Key features include an 8 MHz maximum clock, three 16-bit sigma-delta ADCs, 8 KB Flash, 256 B RAM, 48 I/O ports, and a 2.7 V to 3.6 V supply range. The device also provides five power-saving modes, standby wake-up in less than 6 microseconds according to the verified distributor data, and a frequency-locked loop. These features support designs that need deterministic embedded control while limiting energy use during inactive periods. The MSP430 CPU16 uses a 16-bit RISC architecture with a stated 125 ns instruction-cycle time. Its mixed-signal peripherals are intended for sensors and low-bandwidth analog measurements where a sigma-delta ADC is appropriate. The integrated 128-segment LCD support is especially useful for meter, sensor, and handheld-instrument designs that need local numeric or graphical feedback without a separate display controller. Typical applications include low-power sensor nodes, industrial panel meters, portable measurement equipment, environmental monitoring, battery-powered instruments, and LCD-based control interfaces. The 48 I/O ports provide flexibility for external sensors, switches, indicators, communication interfaces, and actuators. The 2.7 V to 3.6 V operating supply range aligns the MCU with common 3.3 V embedded systems, while the 8 MHz clock supports control-loop and measurement-management tasks. For PCB design, preserve the package pin assignments and follow the manufacturer datasheet for decoupling, analog routing, LCD drive connections, and exposed or unused-pin treatment. Treat ADC signal conditioning, reference stability, and low-power transition sequencing as important validation points. Because the verified data does not provide a complete pin-level table, do not infer pin names from package position alone. This page combines the verified manufacturer product data, distributor specifications, lifecycle information, and practical application guidance. It also distinguishes verified facts from missing parameters and avoids presenting unverified electrical, pricing, or pinout values as datasheet specifications.

見積もり お問い合わせ
MSP430F425IPM - 8MHz 16-bit MCU with 3 Sigma-Delta ADCs | Texas Instruments
MSP430F425IPM

MSP430F425IPM - 8MHz 16-bit MCU with 3 Sigma-Delta ADCs | Texas Instruments

Texas Instruments MSP430F425IPM is an 8 MHz, 16-bit mixed-signal microcontroller designed for low-power sensing and measurement applications. It combines three 16-bit Sigma-Delta ADCs, 16 KB of Flash memory, 512 bytes of RAM, a 128-segment LCD driver, and 48 I/O ports in a 64-pin LQFP package. The device operates from a 1.8 V to 3.6 V supply range and is designed around the MSP430 RISC architecture with 16-bit registers and constant-memory instruction execution. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The MSP430 family is designed for portable measurement, industrial sensing, instrumentation, and battery-powered equipment where energy efficiency is important. MSP430F425IPM combines general-purpose digital control with dedicated analog conversion and LCD support, reducing the number of external components required in a typical measurement product. The MSP430F425IPM provides an 8 MHz maximum clock speed and five power-saving modes. The manufacturer lists active-mode current as 400 uA at 1 MHz and 3 V, standby current as 1.6 uA, and off-mode current with RAM retention as 0.1 uA. Its three Sigma-Delta ADCs are intended for sensors with relatively slow or high-resolution analog outputs, while the LCD driver can support segmented display applications without a separate display controller. The device includes 16 KB of Flash memory, described in distributor listings as 16K x 8 plus 256 bytes, and 512 bytes of RAM. Its 48 I/O ports provide flexibility for digital inputs, outputs, communication lines, and control signals. The 64-LQFP package is suitable for board-level designs that need broad I/O access and a conventional leaded package rather than a very small surface-mount footprint. Typical applications include precision sensor interfaces, industrial measurement instruments, portable data loggers, handheld test equipment, energy-monitoring products, and LCD-equipped control panels. The low-power architecture is particularly useful when the instrument spends most of its operating time between measurements. Engineers should select external passives and communication peripherals to match the required sensor bandwidth, display characteristics, and communication protocol. When laying out the circuit, place the MCU power pins, decoupling capacitors, analog reference connections, and LCD outputs according to the manufacturer pin-description and layout guidance. Keep sensitive analog and display traces away from high-current switching paths where practical. The MSP430F425IPM is identified as an active industrial-range device, making it suitable for designs that require low-power operation and integrated mixed-signal measurement functions. This product page combines the manufacturer device information, distributor package and ordering details, and application-focused design guidance. It highlights the MCU's principal selection criteria: 8 MHz operation, 1.8 V to 3.6 V supply, 16 KB Flash, 512 bytes of RAM, three Sigma-Delta ADCs, 128-segment LCD capability, and the 64-LQFP package.

見積もり お問い合わせ
MSP430F427IPM - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments
MSP430F427IPM

MSP430F427IPM - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments

Texas Instruments MSP430F427IPM is an 8 MHz, 16-bit mixed-signal microcontroller with 32KB of Flash memory, 1KB of RAM, three 16-bit Sigma-Delta ADCs, and a 128-segment LCD controller in a 64-LQFP (10x10 mm) package. Its operating supply range is 2.7 V to 3.6 V, and the device provides 48 I/O ports for embedded sensing, control, and display applications. A mixed-signal microcontroller is a semiconductor that combines a programmable digital controller with analog signal-conversion resources. In the MSP430 product hierarchy, the MSP430F427 belongs to the MSP430 mixed-signal microcontroller family. This combination places digital acquisition, control, and local display support on one device, reducing component count in instruments, industrial panels, and low-power embedded systems. The principal features include a 16-bit RISC MSP430 CPU operating at 8 MHz, 32KB of Flash program memory, 1KB of RAM, and three 16-bit Sigma-Delta ADC channels. The 128-segment LCD controller can drive segmented display applications, while the 48 I/O ports provide connections for sensors, control signals, and human-machine interfaces. A 2.7 V to 3.6 V operating range supports embedded systems designed around a 3.3 V supply. The MSP430 architecture uses 16-bit registers and constant generators to improve code efficiency. Its Sigma-Delta conversion resources are suited to measurement systems that prioritize low-noise acquisition over conversion speed. The integrated LCD capability also removes the need for a separate display controller in suitable instrument designs. The 64-LQFP package exposes the mixed-signal and digital resources while supporting conventional surface-mount assembly. Typical applications include industrial measurement panels, laboratory instruments, portable monitoring equipment, digital meters, sensor-interface controllers, and compact control panels. A design can use the ADC inputs for analog sensing, the GPIO for switches and actuators, and the LCD controller for local status display. Firmware coordination remains essential because analog sampling, display updates, and control tasks must share the available processing and memory resources. Designers should reserve suitable bypassing near the supply pins, validate ADC input ranges against the operating voltage, and confirm that the chosen LCD segment count matches the intended glass. The 1KB RAM constraint makes buffer management and firmware footprint important. The manufacturer product page and datasheet should be used to verify the complete pin description table and electrical limits before layout release. This product page combines the exact MSP430F427IPM characteristics, package information, lifecycle status, sourcing workflow, and verified compatibility analysis. It also distinguishes true pin-compatible replacements from order-code or functional alternatives, helping engineers make a defensible component decision before committing a PCB layout or firmware release.

見積もり お問い合わせ
MSP430F435IPN - 8MHz 16-Bit MCU, 16KB Flash | Texas Instruments
MSP430F435IPN

MSP430F435IPN - 8MHz 16-Bit MCU, 16KB Flash | Texas Instruments

The Texas Instruments MSP430F435IPN is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz MSP430 RISC core, 16 KB of Flash memory, 512 B of SRAM, a 12-bit ADC, comparator, SPI/UART interfaces, and support for a 160-segment LCD in an 80-pin LQFP (PN) package. Its 1.8 V to 3.6 V supply range supports low-voltage embedded systems where energy efficiency, compactness, and integrated analog measurement are important. A microcontroller is a programmable control IC that combines a processor core, memory, digital peripherals, and analog functions on one semiconductor device. The MSP430F435IPN belongs to the mixed-signal microcontroller category, where the processor coordinates embedded control while the ADC, comparator, communications interfaces, and LCD controller reduce the need for separate discrete components. Its architecture is therefore useful in battery-operated instruments, industrial sensing terminals, portable measurement equipment, and compact human-machine-interface controllers. Verified device features include a 16-bit RISC architecture, an operating frequency of 8 MHz, 16 KB of Flash, 512 B of SRAM, a 12-bit ADC, an internal comparator, SPI and UART connectivity, and LCD support for up to 160 segments. The low-power specification reports 280 µA active current at 1 MHz and 2.2 V, 1.1 µA standby current, and 0.1 µA off current with RAM retention. Wake-up from standby takes less than 6 µs, allowing short duty-cycle measurement systems to remain responsive without continuously consuming active-mode power. The MSP430 architecture uses a 16-bit RISC core with 16-bit registers and constant generators that support compact, efficient code. This combination is useful in embedded products that repeatedly perform sensor acquisition, control calculations, and serial communication. The integrated ADC enables analog-to-digital conversion without a separate converter, while SPI and UART provide paths for external sensors, transceivers, displays, and data-logging equipment. The LCD capability is particularly relevant to local segment-display interfaces that do not require a graphical display. Typical uses include handheld meters, portable environmental monitors, industrial control modules, battery-powered readers, and embedded measurement systems. The 80-pin LQFP (PN) package provides more I/O and peripheral connectivity than a small-outline package, making the device suitable for designs that need several external interfaces while retaining a leaded, inspectable package option. Designers should verify the exact pin functions and LCD segment assignments against the manufacturer datasheet before layout because the supplied source summaries do not publish a complete 80-pin map. Decoupling, analog grounding, LCD biasing, and ADC-source impedance should also follow the datasheet layout guidance. The operating-temperature range for this orderable variant is -40 °C to +85 °C. This page consolidates verified manufacturer and distributor information, a package-aware replacement assessment, pricing-status disclosures, application guidance, and practical design cautions so engineers can evaluate the MSP430F435IPN without assuming unverified pin or lifecycle details.

見積もり お問い合わせ
MSP430F435IPZ - 8MHz 16-Bit MCU with 16KB Flash | Texas Instruments
MSP430F435IPZ

MSP430F435IPZ - 8MHz 16-Bit MCU with 16KB Flash | Texas Instruments

The Texas Instruments MSP430F435IPZ is an 8 MHz, 16-bit mixed-signal microcontroller with 16KB Flash memory, 512B SRAM, a 12-bit ADC, comparator, SPI/UART interface, and support for a 160-segment LCD. The device is housed in a 100-pin LQFP (PZ) package measuring 14 mm by 14 mm and operates across a stated -40°C to 85°C temperature range. A mixed-signal microcontroller is an embedded semiconductor that combines a digital processor core with analog or specialized peripheral functions. In the MSP430 product hierarchy, the device belongs to the MSP430 family of 16-bit RISC microcontrollers, while its integrated ADC and comparator place it in the mixed-signal MCU category. This combination allows a single embedded controller to acquire analog measurements, process data, drive a segmented display, and communicate with external equipment. The verified feature set includes a maximum clock frequency of 8 MHz, 16KB of Flash program memory, 512B of SRAM, a 12-bit ADC, an on-chip comparator, SPI and UART connectivity, and LCD support for up to 160 segments. The 512B SRAM supports local variables, stacks, buffers, and peripheral state, while the 16KB Flash provides room for embedded firmware. Exact supply-voltage, converter, and peripheral timing values beyond the supplied data require confirmation in the manufacturer datasheet. The MSP430F435IPZ uses the MSP430 CPU16 architecture and integrates several peripherals around a 16-bit RISC core. The 12-bit ADC is suited to measuring analog sensor outputs, the comparator supports threshold and simple signal-detection tasks, and the SPI/UART interfaces provide serial paths for displays, data loggers, sensors, and external converters. The 160-segment LCD capability is particularly useful in instruments and control panels where a dedicated display controller would add cost and board area. Typical uses include portable measurement instruments, industrial panel meters, handheld readers, low-power environmental monitors, and embedded control equipment with local LCD feedback. Engineers can use the ADC and comparator for sensor acquisition, the serial interfaces for peripheral expansion, and the MSP430 architecture for compact control firmware. Because the exact electrical limits are not present in the supplied verified snippets, production designs should validate supply range, pin multiplexing, and timing against the official datasheet. The principal design consideration is PCB complexity. A 100-pin LQFP is substantially larger and has more fine-pitch connections than a small-outline MCU package, but it exposes the full peripheral complement and supports a 14 mm by 14 mm footprint. Layout should provide a continuous ground plane, short analog inputs, clean separation between sensitive ADC circuitry and switching nodes, and careful decoupling near the device supply pins. This page consolidates the verified manufacturer, distributor, and cross-reference information with package, application, procurement, and design guidance. It also distinguishes directly identified alternatives from compatibility claims that still require datasheet and firmware verification before production use.

見積もり お問い合わせ