MSP430F2012TN - 16MHz, 2KB Flash Mixed-Signal MCU | TI
部品番号: MSP430F2012TN ✓ 生産中MSP430F2012TN 概要
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as analog converters, timers, and serial interfaces. Within the product hierarchy, the MSP430F2012TN is an ultra-low-power mixed-signal microcontroller, also described as a 16-bit MCU. Its MSP430 architecture supports interrupt-driven control, while the integrated analog and communication peripherals reduce the need for external components in cost-sensitive embedded systems.
The principal device characteristics include a maximum clock frequency of 16 MHz, 2 KB of Flash program memory, 128 B of SRAM, 10-bit ADC capability, and integrated I2C and SPI interfaces. The device also includes a built-in 16-bit timer and ten I/O pins. Its digitally controlled oscillator allows the MSP430F20xx family to wake from low-power modes to active mode in less than 1 microsecond, which is valuable for intermittent measurement and control systems.
The mixed-signal feature set allows the MCU to manage both digital control functions and analog inputs. The 10-bit ADC can serve temperature, potentiometer, light, and other sensor-conditioning systems, while the timer supports periodic sampling, timing, and control functions. I2C and SPI provide paths to external sensors, displays, memories, transceivers, and other digital peripherals without requiring parallel data buses.
Typical uses include battery-operated instruments, environmental monitoring, industrial sensing nodes, compact control panels, appliance interfaces, and portable measurement equipment. In these systems, the MSP430F2012TN can sample an analog input, apply decision logic, update an actuator, and communicate results over I2C or SPI. The 14-pin PDIP format is particularly useful for prototypes, educational platforms, and through-hole industrial assemblies where a surface-mount package would be inconvenient.
Designers should account for the limited 2 KB Flash and 128 B SRAM when sizing firmware, buffering data, and selecting a development toolchain. External sensing circuitry, decoupling, clock considerations, and serial-interface pull-ups should be evaluated against the system requirements. The exact pin assignments, electrical limits, and peripheral behavior must be confirmed in the Texas Instruments MSP430F20x1, MSP430F20x2, and MSP430F20x3 mixed-signal microcontroller documentation.
This page combines the verified manufacturer and distributor specifications with purchasing guidance, application context, same-family drop-in candidates, and practical selection considerations. It also identifies unavailable commercial and pin-level data explicitly so engineers can distinguish confirmed facts from items that require confirmation from the manufacturer documentation.
ドロップイン代替品: MSP430F2012TN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2012TN （同一形状・フットプリント） — 相違点: ADC Resolution, Package, Flash Memory, Mounting Type, CPU Architecture.
MSP430F2011TN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2013TN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2012IN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2012IPN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MSP430F2012TN 最大定格＆電気的特性
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | MSP430 CPU16 |
| 最大クロック周波数 | 16 MHz |
| Flash Memory | 2 KB |
| Program Memory Organization | 2K x 8 plus 256 B |
| SRAM | 128 B |
| ADC Resolution | 10 bit |
| Built-In Timer | 16-bit timer |
| Serial Interfaces | I2C and SPI |
| General-Purpose I/O Pins | 10 pins |
| Clock Control | Digitally controlled oscillator |
| Low-Power Wake-Up Time | Less than 1 us |
| Operating Supply | 2.2 V to 3.3 V |
| パッケージ | 14-pin PDIP, 0.300 inch body width, 7.62 mm pitch |
| 実装タイプ | Through-hole |
| Temperature Grade | Industrial |
MSP430F2012TN 14-pin pdip, 0.300 inch body width, 7.62 mm pitch ピン配置ガイド
MSP430F2012TN (14-pin pdip, 0.300 inch body width, 7.62 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2012TN.
詳細は データシート をご参照ください。
主な用途
MSP430F2012TN の用途: 6 件s: Low-Power Environmental Sensor Node, Industrial Process Measurement, Battery-Powered Portable Instrument, Digital Thermometer and Panel Interface, Compact Appliance Control Module, Communication-Assisted Sensor Interface.
Low-Power Environmental Sensor Node
The MSP430F2012TN fits a compact environmental sensor because its 10-bit ADC can measure resistive or ratiometric sensor signals while I2C or SPI connects to a digital sensor or local transceiver. Its digitally controlled oscillator wakes the MCU to active mode in less than 1 microsecond, reducing the delay associated with duty-cycled acquisition. The 16 MHz CPU provides responsive control, although only 128 B of SRAM and 2 KB of Flash are available. Designers should keep buffering compact, retain only essential samples, and use the timer to schedule periodic conversions.
おすすめ
Industrial Process Measurement
For a compact industrial measurement module, the MSP430F2012TN combines a 10-bit ADC, 16-bit timer, and ten I/O pins in a 14-pin PDIP package. The timer can organize periodic sampling and control events, while the ADC can digitize a conditioned analog input from a pressure, temperature, or level sensor. The 2.5 V to 3.3 V supply class indicated by distributor information suits low-voltage control electronics. Engineers should verify analog input ranges, grounding, isolation requirements, and industrial temperature requirements before deploying the device.
おすすめ
Battery-Powered Portable Instrument
The MSP430F2012TN is appropriate for a battery-powered instrument where the 16 MHz MSP430 core must process measurements without the overhead of a larger general-purpose MCU. Its low-power wake-up capability supports event-driven operation, while the timer provides a time base for sampling and display updates. The 14-pin PDIP format simplifies prototype construction and repair. The main constraint is memory: the 128 B SRAM requires disciplined buffering, and the 2 KB Flash demands a compact firmware architecture with careful library selection.
おすすめ
Digital Thermometer and Panel Interface
A digital thermometer can use the MSP430F2012TN to convert analog temperature information, apply filtering or calibration, and drive a local display or keypad. The 10-bit ADC provides 1,024 discrete codes, which is suitable for many moderate-resolution temperature measurements, while the 16-bit timer can schedule periodic updates. I2C offers a compact connection to a digital sensor, and SPI can support a display or external memory. Calibration data and averaging buffers must fit within the 128 B SRAM constraint.
おすすめ
Compact Appliance Control Module
The MSP430F2012TN can serve as the control hub in a compact appliance by reading switches or sensors, driving indicators, sequencing operations, and communicating with an external controller. Ten I/O pins provide a practical interface budget for discrete controls, while the timer supports repeatable timing sequences. Its 16 MHz processing capability allows responsive state-machine control, and the 14-pin PDIP package is convenient for assembled control boards. Firmware must remain within 2 KB, so protocol handling should be assigned to a peripheral when possible.
おすすめ
Communication-Assisted Sensor Interface
The MSP430F2012TN can bridge a simple analog or digital sensor to a higher-level communications network using its integrated I2C or SPI interface. The 16-bit core can validate readings, apply thresholds, and package data for transmission, while the timer coordinates periodic polling. This arrangement is useful in distributed monitoring systems where a node must remain small and consume little standby power. The limited SRAM makes efficient buffering especially important, and the communication physical layer should be selected separately to match range, speed, and power requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F2012TN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F2011TN | MSP430F2013TN | MSP430F2012IN | MSP430F2012IPN |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP |
| CPU Architecture | MSP430 CPU16 | MSP430 family; exact details require confirmation | MSP430 family; exact details require confirmation | MSP430 CPU16 family | MSP430 CPU16 family |
主な差別化要因
- Mixed-signal integration in a compact through-hole package （vs MSP430F2121)
- Lower memory footprint for tightly constrained firmware （vs MSP430F2121)
- Verified 10-bit analog conversion capability （vs MSP430F2011TN)
設計ノート
Plan the supply and decoupling around the verified 2.2 V to 3.3 V operating range. Place the required local bypass capacitors at the device power pins with short return paths, and confirm the capacitor voltage rating and ESR requirements in the manufacturer datasheet. Because no external power value, regulator tolerance, or maximum input level appears in the supplied excerpts, those details must be established before layout release.
Route the 14-pin PDIP footprint for through-hole assembly and verify every signal against the official package pin diagram. Keep analog sensor inputs away from switching nodes and digital return-current paths, use a continuous ground reference where practical, and provide clean returns for the ADC and serial interfaces. The complete pin list was not included in the verified excerpts, so the datasheet must remain the controlling source during schematic capture.
Do not treat a 16 MHz CPU as permission to use unbounded firmware or buffering. The verified device has only 2 KB of Flash and 128 B of SRAM, so library selection, stack depth, buffer allocation, and protocol state can determine whether the design fits. Compile early with the actual toolchain and linker map, minimize interrupt nesting, and use the 16-bit timer for deterministic scheduling rather than relying on software delays.
For I2C or SPI-connected sensors and peripherals, confirm voltage levels, rise and fall times, pull-up requirements, maximum bus capacitance, and isolation from noisy analog inputs. The verified excerpts identify the interfaces but do not specify their electrical modes or timing limits. Review those parameters in the MSP430F20xx datasheet before fixing pull-up values or setting communication timing.
コンプライアンス情報
The supplied manufacturer and distributor excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than being inferred from the industrial temperature grade or manufacturer identity.
