マイクロコントローラ

製品 (19,000+)

DSPIC33FJ32GS610-E/PF - 16-bit DSC 32KB Flash 100-TQFP | Microchip
DSPIC33FJ32GS610-E/PF

DSPIC33FJ32GS610-E/PF - 16-bit DSC 32KB Flash 100-TQFP | Microchip

The Microchip Technology DSPIC33FJ32GS610-E/PF is a 16-bit digital signal controller (DSC) with 32KB of Flash program memory, up to 40 MIPS performance in the extended-temperature grade, and a 100-pin TQFP (PF) surface-mount package. It operates from 3.0V to 3.6V across -40C to +125C and is AEC-Q100 qualified, targeting automotive and industrial digital power conversion. A digital signal controller combines the computational capability of a digital signal processor with the peripheral set and control architecture of a microcontroller on a single die. Within the power-management hierarchy, a DSC such as this one replaces analog control loops in switch-mode power supplies with software-based control, enabling programmable compensation, adaptive algorithms, and digital communication. The dsPIC33F family from Microchip sits in the broader taxonomy of 16-bit MCUs with DSP enhancements, positioned between general-purpose microcontrollers and dedicated DSPs. Key differentiating features include high-speed PWM peripherals purpose-built for power conversion, high-speed analog-to-digital converters for fast control-loop sampling, analog comparators for cycle-by-cycle current limiting, and DSP engine instructions for efficient PID and filter execution. The extended-temperature (E) suffix guarantees operation to +125C ambient, which is essential for power supplies in sealed or high-ambient environments. Architecturally, the dsPIC33FJ32GS610 pairs a 16-bit modified Harvard core with a phase-locked loop clock multiplier, four DMA channels for moving ADC results without CPU intervention, and multiple timers. The dedicated SMPS-oriented peripherals support multi-loop topologies such as voltage-mode, current-mode, and average-current-mode control with minimal CPU loading. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and uninterruptible power supplies (UPS). The high-speed PWM resolution keeps pulse widths precise at high switching frequencies, while the fast ADC synchronizes sampling to the PWM period for jitter-free control loops. A key design consideration is supply decoupling: place low-ESR ceramic capacitors close to every VDD/VSS pair, and keep the analog supply filtered separately from the digital rails to preserve ADC accuracy. Because the -E grade runs to +125C, derate power and verify junction temperature against the datasheet thermal data. This page synthesizes verified distributor data, drop-in alternatives, design guidance, and commercial information not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32GS610-E/PT - 16-Bit DSC 40MIPS 32KB Flash | Microchip
DSPIC33FJ32GS610-E/PT

DSPIC33FJ32GS610-E/PT - 16-Bit DSC 40MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GS610-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32GS610 SMPS family, delivering 40 MIPS performance with 32KB (32K x 8) Flash program memory, 3.0V to 3.6V supply operation, and a 100-pin TQFP surface-mount package with extended temperature range (-40C to +125C). A digital signal controller combines the computational core of a 16-bit microcontroller with DSP-grade peripherals and multiply-accumulate hardware, sitting in the hierarchy between a general-purpose MCU and a dedicated DSP. In power-conversion systems, the DSC replaces analog control loops with firmware-based digital control, enabling adaptive algorithms such as nonlinear PID, predictive control, and multi-loop coordination that are impractical with discrete analog controllers. Key differentiating features include high-speed PWM peripherals purpose-built for switch-mode power conversion, up to four high-speed analog comparators with direct PWM interaction for fast overcurrent response, an on-chip ADC with multiple sample-and-hold circuits, and 35 I/O ports for system interfacing. The device executes one instruction per cycle at up to 40 MIPS, supporting deterministic loop closure in digital power applications. Architecturally, the dsPIC33F core integrates a 16-bit RISC pipeline with DSP instruction extensions (barrel shifter, modulo and bit-reversed addressing), Flash program memory with self-programming capability, and low-power modes. The peripheral set is optimized for closed-loop digital SMPS control rather than general connectivity, distinguishing the GS series from the GP and MC dsPIC33F families. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and solar inverters, where the combination of high-resolution PWM and fast comparators directly addresses digital power-control requirements. A key design consideration: the 3.0V to 3.6V supply range requires a dedicated 3.3V rail, and adequate decoupling plus a clean analog ground are essential for ADC and comparator accuracy in high-switching-noise power converters. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32GS610T-50I/PF - 16-bit 50MIPS DSC | Microchip | Digital Power
DSPIC33FJ32GS610T-50I/PF

DSPIC33FJ32GS610T-50I/PF - 16-bit 50MIPS DSC | Microchip | Digital Power

The Microchip Technology DSPIC33FJ32GS610T-50I/PF is a 16-bit digital signal controller (DSC) delivering up to 50 MIPS performance with 32KB (32K x 8) of FLASH program memory and 4KB of RAM, housed in a 100-pin TQFP (14x14 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power management hierarchy, the dsPIC33F GS family sits at the heart of digitally controlled switch-mode power supplies: it replaces analog control loops with firmware-based PID and predictive control algorithms while maintaining the cycle-by-cycle deterministic response that power conversion demands. Key features of this device include the SMPS-specific peripheral set that distinguishes the GS series from general-purpose dsPIC33F parts: a high-speed PWM module purpose-built for power conversion, dedicated analog comparators, a 10-bit ADC with simultaneous multi-channel sampling, and quadrature encoder interface blocks for motor-driven systems. The 50 MIPS core executes single-cycle MAC and DSP instructions, enabling fast loop closure in PFC and resonant converter topologies. Technically, the dsPIC33F core is a modified Harvard architecture with a 16-bit data path and 24-bit instruction words, supplied from a 3.0V to 3.6V rail. The device provides 4 DMA channels, 8 timers, and 2 serial communication ports per the parameter listings, allowing control loops to run without CPU intervention on data moves. The I-suffix grade is qualified from -40C to +85C for industrial environments. Typical applications include AC-to-DC converters, power factor correction stages, DC-to-DC converters, uninterruptible power supplies, and digital lighting or battery-charging power stages, where the SMPS PWM and comparator peripherals directly support voltage-mode, current-mode, and multi-loop control. Design consideration: budget the 3.3V supply decoupling carefully and verify that the 32KB FLASH is sufficient for control plus communication stacks; if firmware grows, the pin-compatible DSPIC33FJ64GS610 doubles memory without board change. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32GS610T-50I/PT - 16-bit 50MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32GS610T-50I/PT

DSPIC33FJ32GS610T-50I/PT - 16-bit 50MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GS610T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS from its dsPIC33F core, with 32KB (32K x 8) of FLASH program memory, 4KB of RAM, and a 100-pin TQFP (12x12 mm) surface-mount package in the industrial temperature grade (-40C to +85C). A digital signal controller combines the control peripherals of a microcontroller with the math throughput of a DSP. Within the power-management hierarchy, a DSC such as the dsPIC33F family sits between a general-purpose MCU and a dedicated power-supply controller: it runs the main application while also executing high-speed closed-loop control of switching power converters. The dsPIC33FJ32GS610 belongs to Microchip's GS-series, purpose-built for digital switch-mode power supplies (SMPS), power-factor correction, and digital lighting. Key features of this part include dedicated high-resolution SMPS PWM peripherals optimized for peak-current-mode and voltage-mode converter control, two quadrature encoder interface (QEI) modules for motor feedback, four analog comparators, and on-chip DAC resources. The 50 MIPS core executes DSP multiply-accumulate instructions, enabling single-chip implementation of compensators and filters that would otherwise need external analog circuitry. Technically, the device operates from a 3.3V supply typical of the dsPIC33F family and is programmed and debugged through the PGECx/PGEDx pins using Microchip In-Circuit Serial Programming (ICSP), keeping ICSP trace lengths short as recommended in the datasheet. Development is supported by the Explorer 16/32 Development Board with processor Plug-In Modules (PIMs), MPLAB X IDE, and the XC16 compiler. Typical applications include digitally controlled AC-DC and DC-DC power supplies, power-factor-correction stages, uninterruptible power supplies, digital lighting ballasts, battery chargers, and embedded motor-control systems that leverage the QEI modules. A key design consideration: verify PWM resolution and peripheral channel allocation against your converter topology early, since the GS-series SMPS PWM resource set differs from the motor-control PWM of the MC-series dsPIC33F parts. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33F GS610 family, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC101-E/P - 16-Bit DSC 32KB Flash 20-PDIP | Microchip
DSPIC33FJ32MC101-E/P

DSPIC33FJ32MC101-E/P - 16-Bit DSC 32KB Flash 20-PDIP | Microchip

The Microchip Technology DSPIC33FJ32MC101-E/P is a 16-bit dsPIC33F digital signal controller (DSC) delivering 16 MIPs performance, 32KB (11K x 24) FLASH program memory, 1KB RAM, and 15 I/O pins in a 20-pin PDIP (0.300 in, 7.62 mm) through-hole package. It operates from a 3V to 3.6V supply. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power management hierarchy, the DSC sits above general-purpose MCUs for control-loop tasks, offering hardware multiply-accumulate (MAC), barrel shifting, and DSP instruction support while retaining MCU-style flash, interrupt, and peripheral programming models. Key features include the dsPIC33F core at 16 MIPs, motor control PWM (MCPWM) outputs, three analog comparators, a Charge Time Measurement Unit (CTMU), an RTCC real-time clock and calendar, 6-channel 10-bit ADC, and Peripheral Pin Select (PPS) for remapping digital peripherals onto 15 available I/O pins. Connectivity spans I2C, SPI, UART/USART, IrDA, and LINbus. The -E suffix denotes an extended temperature rating of -40C to +125C, and the family is AEC-Q100 automotive capable. Architecturally, the device uses a modified Harvard 16-bit core with DSP engine, supporting C compiler development through Microchip MPLAB X IDE and XC16 compiler. Flash self-programming enables field firmware updates, while the 16 MIPs rate supports execution of advanced motor-control algorithms such as field-oriented control (FOC) on small pulse-width-modulated (PWM) drives. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor control, power-factor-correction converters, electronic ballasts, and low-pin-count sensor interfaces using CTMU-based capacitive touch measurement. Design consideration: the 20-pin PDIP is ideal for prototyping and through-hole assembly, but the 1KB RAM limits complex control stacks - size buffers carefully. This page synthesizes distributor pricing, drop-in same-package alternatives, pinout data, and design guidance not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC101-E/SO - 16-bit DSC 32KB Flash 16MIPS | Microchip
DSPIC33FJ32MC101-E/SO

DSPIC33FJ32MC101-E/SO - 16-bit DSC 32KB Flash 16MIPS | Microchip

The Microchip Technology DSPIC33FJ32MC101-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ Motor Control family delivering 16 MIPS at 32 MHz with 32 KB (11K x 24) Flash program memory, 2 KB SRAM, and a 20-lead SOIC (SO) package with extended temperature rating (-40C to +125C). A digital signal controller combines the computational power of a DSP engine with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the standard choice for real-time closed-loop control systems such as motor drives and digital power converters. The dsPIC33F family belongs to Microchip's broader 16-bit embedded control portfolio. Key features include the Motor Control PWM (MCPWM) module with complementary outputs and dead-time control, three analog comparators, the Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing measurement, Real-Time Clock and Calendar (RTCC), and Peripheral Pin Select (PPS) for flexible pin mapping. The modified Harvard architecture with a DSP engine, barrel shifter, and single-cycle MAC supports efficient filtering and control algorithms. Technically, the device runs from a 3.0V to 3.6V supply, uses CMOS flash technology, and provides multiple low-power modes (idle, sleep) plus fast wake-up. The 24-bit instruction word architecture yields 11K executable instructions from the 32KB Flash, and the 2KB SRAM is organized for DSP-style accumulate operations. Typical applications include BLDC and PMSM motor control, digital power supplies (LLC, PFC), uninterruptible power supplies, and battery chargers, where the MCPWM and fast analog comparators directly reduce external component count. Design consideration: budget the 3.0-3.6V supply rail early, and note that the single MCPWM bank must cover all motor phases on this 20-pin variant, so plan PPS mapping before routing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC101-I/SO - 16-bit DSC, 32KB Flash | Microchip
DSPIC33FJ32MC101-I/SO

DSPIC33FJ32MC101-I/SO - 16-bit DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC101-I/SO is a 16-bit digital signal controller (DSC) delivering 16 MIPS at up to 32 MHz, with 32KB (11K x 24) of Flash program memory and 2KB of SRAM, housed in a 20-pin SOIC (SO) package rated for -40C to +85C operation. A digital signal controller combines the compute throughput of a DSP core with the peripheral set and ease of use of a microcontroller, sitting in the hierarchy between general-purpose MCUs and dedicated DSP ICs. The dsPIC33F family executes a modified Harvard, C compiler-friendly instruction set, making it a common choice for closed-loop power conversion and motion control where a plain MCU lacks MAC performance. Key features of this member of the dsPIC33FJ32MC101 family include Motor Control PWM (MCPWM), a Charge Time Measurement Unit (CTMU), a Real-Time Clock and Calendar (RTCC), three comparators, and Peripheral Pin Select (PPS) that allows digital peripherals to be remapped to available pins - a major advantage on a low 20-pin footprint. The DSC also provides up to 16 mA I/O sink capability on selected pins and two external interrupt sources. Architecturally, the device runs from an internal FRC oscillator or external crystal, executes single-cycle MAC and DSP multiply instructions, and supports In-Circuit Serial Programming (ICSP) with multiple PGECx/PGEDx pin pairs for debugging. Flash self-programming enables field firmware updates without an external programmer. Typical applications include Brushless DC and PMSM motor control, digital power supplies such as LLC and PFC stages, electronic ballasts, and battery chargers - systems that need deterministic PWM generation plus fast ADC-triggered control loops. Design consideration: the 20-pin budget is tight; plan pin assignments using PPS early, and respect the 3.0V-3.6V supply rail with adequate decoupling on all VDD/VSS pin pairs. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing context, verified drop-in alternatives, and practical design notes in one place.

見積もり お問い合わせ
DSPIC33FJ32MC101T-E/SO - 16-bit DSC, 32KB Flash, 16 MIPS | Microchip
DSPIC33FJ32MC101T-E/SO

DSPIC33FJ32MC101T-E/SO - 16-bit DSC, 32KB Flash, 16 MIPS | Microchip

The Microchip Technology DSPIC33FJ32MC101T-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32MC101 motor-control family, delivering 16 MIPS performance with 32KB (11K x 24) of FLASH program memory, 2KB (1K x 16) of RAM, and an extended temperature range of -40C to +125C in a 20-pin SOIC surface-mount package. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes a modified Harvard architecture with DSP-engine instructions (MAC, dual operand fetch) while retaining familiar MCU peripherals, making it a common choice in the power electronics and motor control semiconductor category. Key features include motor control PWM (MCPWM) outputs for three-phase and single-phase inverter drive, three analog comparators for fast overcurrent protection, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurements, and a real-time clock and calendar (RTCC). Communication peripherals cover I2C, SPI, UART/USART, IrDA, and LINbus, and Peripheral Pin Select (PPS) allows flexible remapping of digital I/O functions. The DSP engine can fetch two data operands concurrently while multiplying two W registers and accumulating the result in a single cycle, according to the dsPIC33FJ16/dsPIC33FJ32 family datasheet (document 70000652f). This architecture sustains control-loop bandwidths needed for field-oriented motor control and digital power conversion without an external DSP. Typical applications include BLDC and PMSM motor drives, switch-mode power supplies, UPS systems, automotive auxiliary control modules (the device is AEC-Q100 qualified), and industrial sensing nodes that benefit from the CTMU and RTCC peripherals. When designing with this device, budget the 2KB RAM carefully: field-oriented control with fractional arithmetic fits, but large buffer tables do not. Use the E-grade temperature option only where the -40C to +125C range is genuinely required, since the I-grade variant is lower cost. This page synthesizes distributor data, same-family drop-in alternatives, pricing tiers, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC101T-I/SO - 16-Bit 16 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32MC101T-I/SO

DSPIC33FJ32MC101T-I/SO - 16-Bit 16 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC101T-I/SO is a 16-bit dsPIC33F digital signal controller (DSC) delivering 16 MIPS at up to 32KB (11K x 24) of FLASH program memory and 2KB of RAM, housed in a 20-pin SOIC package. It belongs to the motor-control-optimized MC101 subfamily. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and interrupt architecture of a microcontroller, sitting between a general-purpose MCU and a standalone DSP in the embedded processor hierarchy. DSCs are built for closed-loop control loops such as field-oriented motor control and digital power conversion. Key features include motor control PWM (MCPWM) outputs, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing, three analog comparators, a real-time clock and calendar (RTCC), and Peripheral Pin Select (PPS) that allows digital peripherals to be remapped to available pins. I/O pins sink and source up to 10 mA (6 mA for standard VOH/VOL) with up to 16 mA or 12 mA on non-standard VOH1 pins, and up to 20 selectable open-drain outputs and internal pull-ups are supported. Architecturally, the dsPIC33F core uses a modified Harvard pipeline executing one instruction per cycle at 16 MIPS from a 16-bit instruction word with 24-bit data path for DSP multiply-accumulate operations, enabling PID and filter loops with deterministic timing. Typical applications include BLDC and PMSM motor control, digital power supplies, battery chargers, and industrial sensing nodes where the CTMU and comparators reduce external component count. A key design consideration: the internal core regulator requires a low-ESR capacitor on the VCAP pin, and 3.0V to 3.6V supply decoupling must be placed close to both VDD pairs. This page adds distributor-sourced pricing context, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC102T-E/SO - 16-bit DSC 16 MIPS 32KB Flash | Microchip
DSPIC33FJ32MC102T-E/SO

DSPIC33FJ32MC102T-E/SO - 16-bit DSC 16 MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC102T-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ motor control family, delivering up to 16 MIPS from its dsPIC33F core with 32KB (11K x 24) of FLASH program memory and 2KB of RAM, housed in a 28-pin SOIC package with extended temperature (-40C to +125C) capability. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, providing hardware multiply-accumulate (MAC) and DSP instruction support for control-loop mathematics such as PID and field-oriented control, while retaining familiar MCU peripherals like UART, SPI, and I2C. Key features of this part include motor control PWM (MCPWM) outputs, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurements, a real-time clock and calendar (RTCC), and Peripheral Pin Select (PPS) for flexible peripheral-to-pin remapping. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, addressing both automotive and industrial communication needs. The architecture runs at up to 30 MIPS equivalent clocking with 5V-tolerant I/O pins (pin-specific), up to 16 mA or 12 mA non-standard sink/source capability on selected pins, and three external interrupts (two remappable). FLASH is rated for in-circuit self-programming, supporting field firmware updates in deployed motor drives. Typical applications include BLDC and PMSM motor control, switch-mode power supplies, digital ballasts, battery chargers, and automotive auxiliary systems - the AEC-Q100 qualification of this E-temperature grade part makes it suitable for under-hood-adjacent environments. Design consideration: the core operates from 3.0V to 3.6V (nominal 3.3V), so level shifting is required when interfacing with 5V legacy peripherals despite 5V-tolerant inputs. This page synthesizes distributor pricing, verified drop-in alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC102T-I/ML - 16-bit DSC 16 MIPS 32KB Flash | Microchip
DSPIC33FJ32MC102T-I/ML

DSPIC33FJ32MC102T-I/ML - 16-bit DSC 16 MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC102T-I/ML is a 16-bit motor control Digital Signal Controller (DSC) delivering 16 MIPS performance with 32KB (11K x 24) of Flash program memory and 2KB of RAM, housed in a 28-pin VQFN (6x6 mm) exposed-pad package operating from a 3.0V to 3.6V supply. A Digital Signal Controller combines the compute capability of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the embedded hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes DSP-class instructions (barrel shifter, multiply-accumulate, modulo addressing) while retaining microcontroller peripherals such as UART, SPI, I2C, and timers, making it a natural fit for closed-loop power conversion and motion control systems. Key features include the dsPIC33F 16-bit core running at up to 16 MIPS (32MHz), motor control PWM (MCPWM) outputs with complementary modes and dead-time control, an 8-channel 10-bit ADC, and Peripheral Pin Select (PPS) that remaps digital peripherals onto flexible RP pins. The Charge Time Measurement Unit (CTMU) supports capacitive touch and precision timing measurements. Architecturally, the device uses a modified Harvard bus with a 24-bit instruction word, a 17x17 single-cycle hardware multiplier, a 40-bit accumulator DSP engine, and two address generation units. Flash is self-programmable, supporting field firmware updates, and the part offers multiple low-power modes including Idle and Doze for energy-sensitive designs. Typical applications include brushless DC (BLDC) and PMSM motor drives, power inverters, digital power supplies (LLC, boost, PFC stages), and embedded control in industrial appliances, all cases where the hardware MCPWM with fault inputs and fast ADC synchronization provide deterministic closed-loop control. Design consideration: the 28-QFN exposed pad acts as the primary VSS/thermal path, so it must be soldered to a grounded copper pour; at 16 MIPS, ensure the 3.3V rail is decoupled with 0.1uF ceramics at both VDD pins and place the MCPWM gate-driver traces short to limit ringing. This page consolidates verified distributor data, drop-in same-package alternatives, pricing tiers, pinout information, and practical design notes not found in a single manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC102T-I/SO - 16-bit DSC, 32KB Flash, MCPWM | Microchip
DSPIC33FJ32MC102T-I/SO

DSPIC33FJ32MC102T-I/SO - 16-bit DSC, 32KB Flash, MCPWM | Microchip

The Microchip Technology DSPIC33FJ32MC102T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ motor control family, delivering 16 MIPS performance with 32KB (11K x 24) of Flash program memory, 2KB of RAM, and a rich motor-control peripheral set including MCPWM, three comparators, a CTMU, and an RTCC, all housed in a 28-pin SOIC (7.50mm width) package. A digital signal controller combines the computational throughput of a DSP with the deterministic control peripherals and interrupt architecture of a microcontroller. Within the power-management hierarchy, the DSC sits above general-purpose MCUs and below standalone DSPs, making the dsPIC33FJ family a common choice for closed-loop digital control of motors and switched-mode power conversion. Key features include a 16-bit dsPIC33F core executing up to 16 MIPS, motor control PWM (MCPWM) outputs suited to BLDC, PMSM, and ACIM drive topologies, three on-chip analog comparators for fast overcurrent and zero-crossing detection, and the Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement. Peripherals also include a real-time clock and calendar (RTCC) and Peripheral Pin Select (PPS) for flexible digital I/O mapping. According to Microchip product documentation, I/O pins can sink or source 10 mA (6 mA) standard, up to 16 mA or 12 mA on non-standard VOH pins, with up to 20 selectable open-drain outputs and pull-ups, plus three external interrupts (two remappable). The device operates at 3.3V over an industrial -40C to +85C temperature range (I suffix) and supports In-Circuit Serial Programming (ICSP) and debugging via standard Microchip tools (MPLAB X IDE, ICD 3, PICkit 3/4). The architecture provides DSP multiply-accumulate instructions and two 40-bit accumulators for filtering and control-loop math. Typical applications include brushless DC and permanent-magnet motor drives, digital power supplies and PFC stages, electronic locking and sensing systems using the CTMU, and industrial automation nodes where low pin count and low cost matter. Design consideration: reserve the dedicated MCPWM, comparator, and PPS pin roles early in layout, and decouple VDD/VSS pairs with 0.1uF ceramics placed within 5mm of the pins; PWM switching edges demand careful ground-return planning. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
DSPIC33FJ32MC102T-I/TL - 16-bit DSC 32KB Flash Motor Control | Microchip
DSPIC33FJ32MC102T-I/TL

DSPIC33FJ32MC102T-I/TL - 16-bit DSC 32KB Flash Motor Control | Microchip

The Microchip Technology DSPIC33FJ32MC102T-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32MC102 motor control family, delivering up to 16 MIPS (40 MHz instruction clock from a 32 MHz oscillator family), 32 KB (11K x 24) of Flash program memory and 2 KB of RAM, housed in a 36-pin VTLA (5x5 mm) QFN package with exposed thermal pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU (such as a PIC18) and below a full DSP or FPGA, offering single-cycle MAC instructions, DSP engine addressing modes, and deterministic interrupt latency that closed-loop control systems demand. Key features include motor control PWM (MCPWM) peripherals with complementary outputs and dead-time insertion, three analog comparators, a Charge Time Measurement Unit (CTMU), an RTCC real-time clock/calendar, and Peripheral Pin Select (PPS) for flexible I/O remapping. Interfaces include I2C, SPI, UART/USART, and IrDA, enabling flexible communication in embedded systems. The dsPIC33F core executes an modified Harvard architecture with a 16-bit data path and 24-bit instruction words, supporting DSP multiply-accumulate and divide operations needed for field-oriented control (FOC), sensorless BLDC algorithms, and power-conversion loops. The analog front end includes a 10-bit ADC supporting simultaneous sampling for three-phase current sensing. Typical applications include BLDC and PMSM motor drives, AC-DC and DC-DC power supplies, digital lighting ballasts, and embedded industrial control. When designing, note the 3.0V to 3.6V supply requirement and plan PCB thermal relief on the exposed pad for PWM-heavy loads. This page synthesizes distributor data, drop-in alternatives, and design guidance not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC104-E/ML - 16-Bit 16 MIPS Motor Control DSC | Microchip
DSPIC33FJ32MC104-E/ML

DSPIC33FJ32MC104-E/ML - 16-Bit 16 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ32MC104-E/ML is a 16-bit motor control Digital Signal Controller (DSC) delivering up to 16 MIPS performance with 32 KB (11K x 24) of Flash memory, 2 KB of RAM, and an extended -40C to +125C operating range, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A Digital Signal Controller combines the computational throughput of a DSP core with the peripherals, interrupt structure, and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33F motor control family sits between general-purpose MCUs and dedicated DSPs, making it a common single-chip choice for field-oriented control (FOC) of motors. Key features include the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, the Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing, three analog comparators, a 10-bit ADC, a Real-Time Clock and Calendar (RTCC), and Peripheral Pin Select (PPS) for flexible digital I/O remapping. The dsPIC33F core is a modified Harvard architecture with a 16-bit data path, DSP multiply-accumulate (MAC) instructions, and hardware division support, allowing single-cycle multiply operations used extensively in Clarke/Park transforms and PI control loops executed in FOC firmware. The -E extended temperature grade and AEC-Q100 automotive qualification make it suitable for under-hood and industrial-ambient environments. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, sensorless FOC for pumps and fans, power factor correction, and digitally controlled inverters. The low pin count and small footprint also suit compact appliance and power-tool boards. Designers should note the 3.0V to 3.6V supply requirement and plan the 3.3V rail accordingly; the exposed pad on the QFN must be soldered to ground for thermal and electrical performance. This page synthesizes distributor data, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC104-E/PT - 16-bit Motor Control DSC 44-TQFP | Microchip
DSPIC33FJ32MC104-E/PT

DSPIC33FJ32MC104-E/PT - 16-bit Motor Control DSC 44-TQFP | Microchip

The Microchip Technology DSPIC33FJ32MC104-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32MC motor control family with 32 KB of Flash program memory, 2 KB of SRAM, and a maximum clock frequency of 32 MHz, housed in a 44-pin TQFP (PT) surface-mount package and qualified to AEC-Q100 for automotive applications with an extended -40C to +125C operating temperature range. A digital signal controller combines the computational core of a microcontroller with DSP-class arithmetic capability. In the power-management hierarchy, the dsPIC33FJ32MC104 sits inside the 16-bit DSC category that bridges general-purpose MCUs (such as the PIC24) and dedicated DSPs, making it a single-chip solution for control loops that need both fast multiply-accumulate math and flexible digital I/O. Key features include the Motor Control PWM (MCPWM) module with complementary and independent outputs for inverter and BLDC/ACIM control, the Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement, and Peripheral Pin Select (PPS), which allows many digital peripherals to be remapped onto available pins - a major advantage on this low-pin-count 44-terminal device. I/O pins sink or source 10 mA (6 mA pin-specific) with up to 16 mA or 12 mA available on non-standard VOH pins, and up to 20 pins support selectable open-drain and pull-up configurations. Architecturally, the device is a CMOS 16-bit core with DSP engine extensions, multiple PGECx/PGEDx pairs for in-circuit serial programming and debugging (any pair works as long as ICSPCLK and ICSPDAT use the same pair), and support for seamless migration across the PIC24F, PIC24H and dsPIC33 families, protecting software investment as memory or feature needs grow. Typical applications include BLDC and PMSM motor drives, AC induction motor control, digital power supplies (power factor correction, LLC controllers), and automotive auxiliary systems that benefit from AEC-Q100 qualification at low cost. For design, connect every VDD and VSS pin pair and decouple each with a 0.1 uF ceramic capacitor placed close to the pins, per Microchip layout guidance. This page synthesizes verified distributor and manufacturer data with drop-in alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC104-E/TL - 16-bit DSC 32KB Flash Motor Control | Microchip
DSPIC33FJ32MC104-E/TL

DSPIC33FJ32MC104-E/TL - 16-bit DSC 32KB Flash Motor Control | Microchip

The Microchip Technology DSPIC33FJ32MC104-E/TL is a 16-bit motor control digital signal controller (DSC) delivering 16 MIPS from a dsPIC33F core with 32KB flash and 2KB SRAM, housed in a 44-pin TQFP (VTLA, exposed pad) package rated for -40C to +125C extended temperature operation. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU for control-loop-intensive tasks such as field-oriented motor control, where deterministic interrupt latency and hardware PWM units are essential. The dsPIC33F family occupies this niche with a modified Harvard 16-bit architecture, DSP multiply-accumulate instructions, and peripherally-integrated control peripherals. Key features include dual MCPWM motor-control PWM modules with complementary outputs and dead-time insertion, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, Peripheral Pin Select (PPS) for flexible pin mapping, three analog comparators, a Real-Time Clock and Calendar (RTCC), and a 10-bit ADC with simultaneous sampling capability suited to current-shunt feedback in motor drives. Architecturally, the dsPIC33F core executes C-compiler-friendly code at up to 16 MIPS (approximately 40 MHz FRC or external crystal operation, with internal PLL), providing fixed-point DSP instructions including MAC and dual operand fetch, which enables single-shunt or three-shunt FOC algorithms to close current loops at 10-20 kHz switching frequencies with margin to spare. Typical applications include BLDC and PMSM motor drives, power factor correction converters, digital UPS and inverter control, and embedded capacitive-touch user interfaces, where the combination of hardware MCPWM, CTMU and extended-temperature rating fits cost-sensitive industrial designs. Design consideration: this 3.3V device requires clean decoupling on all VDD/VDDCORE pin pairs and correct configuration of the MCLR and PGEC/PGED programming pair; verify the silicon errata document (DS80000549B) before committing to production layouts. This page synthesizes verified distributor data, drop-in family alternatives, and design guidance not found together in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC104-I/ML - 16-bit DSC, 16 MIPS, 32KB Flash | Microchip
DSPIC33FJ32MC104-I/ML

DSPIC33FJ32MC104-I/ML - 16-bit DSC, 16 MIPS, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC104-I/ML is a 16-bit digital signal controller (DSC) delivering up to 16 MIPS from 32KB (11K x 24) of Flash program memory and 2KB of SRAM, housed in a 44-pin QFN (8x8 mm) package. It belongs to the motor-control-optimized dsPIC33FJ32MC104 family, integrating motor control PWM (MCPWM), a Charge Time Measurement Unit (CTMU), a real-time clock and calendar (RTCC), and Peripheral Pin Select (PPS) for flexible I/O mapping. A digital signal controller is a hybrid device that combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy, DSCs sit above basic MCUs for embedded control tasks such as field-oriented motor control, digital power conversion, and sensor conditioning, where single-cycle MAC (multiply-accumulate) DSP instructions and fast interrupt response are required. Key features include the 16-bit modified Harvard architecture with DSP engine, the CTMU for capacitive touch and precise time measurement, up to three MCPWM generators with complementary outputs and dead-time control, and PPS that lets developers remap digital peripherals onto selectable pins. The 44-QFN (8x8) footprint keeps board area small while exposing sufficient PWM and analog channels. Architecturally, the dsPIC33FJ core executes two-operand MAC instructions that fetch two data operands from memory in the same cycle while multiplying two W registers and accumulating the result, with optional saturation, as described in the Microchip family datasheet. This makes closed-loop current control loops, Clarke/Park transforms, and PI regulators practical at modest clock rates, reducing system cost compared with higher-end DSPs. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, switched-mode power supplies and digital power supplies, capacitive-touch user interfaces via CTMU, and industrial sensors and actuators. The motor-control peripheral set and PPS make it especially effective in low-pin-count motion products such as fans, pumps, power tools, and small robotics. Design consideration: use the PGEC3/PGED3 pin pair for in-circuit programming and debugging, as documented in Microchip's Motor Control Plug-in Module information sheet, and reserve these pins on the PCB for easy field updates. This page adds value beyond the datasheet by synthesizing distributor availability data, drop-in same-family alternatives, comparison tables, and practical design notes for procurement and engineering teams.

見積もり お問い合わせ
DSPIC33FJ32MC104T-E/ML - 16-Bit 16 MIPS DSC 32KB FLASH | Microchip
DSPIC33FJ32MC104T-E/ML

DSPIC33FJ32MC104T-E/ML - 16-Bit 16 MIPS DSC 32KB FLASH | Microchip

The Microchip Technology DSPIC33FJ32MC104T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32MC motor-control family, delivering 16 MIPS of performance with 32KB (11K x 24) of FLASH program memory and 1KB of RAM, housed in a 44-pin QFN (ML, 8x8 mm) exposed-pad package. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above general-purpose MCUs and below dedicated DSPs, making it the standard choice for closed-loop motor control, digital power conversion, and sensor-fusion tasks that require fast multiply-accumulate operations alongside real-time peripherals. Key features of this device include the motor control PWM (MCPWM) module for complementary and independent PWM generation, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, three analog comparators, and a Real-Time Clock and Calendar (RTCC). Peripherals can be flexibly routed through Peripheral Pin Select (PPS), letting designers map UART, SPI, I2C, and other digital functions to available pins. Connectivity options include I2C, SPI, UART/USART, IrDA, and LINbus, covering automotive and industrial network requirements. The core operates from a 3.3V supply at up to 16 MIPS, and up to 5V-tolerant digital pins simplify interfacing with legacy 5V systems. The -E temperature grade supports -40C to +125C operation, and the device is AEC-Q100 qualified for automotive applications. Typical applications include brushless DC and PMSM motor control, digital power supplies, automotive body modules, and industrial sensing nodes where the MCPWM and CTMU peripherals directly reduce external component count. Design consideration: plan early for PPS pin mapping, since analog-capable pins do not support full remappability; reserve dedicated pins for the MCPWM outputs before routing I2C and UART functions. This page synthesizes distributor pricing, drop-in alternative analysis, comparison tables, and practical design notes not found in the manufacturer datasheet, giving engineers and buyers a single decision-ready reference.

見積もり お問い合わせ
DSPIC33FJ32MC104T-E/TL - 16-bit 16MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32MC104T-E/TL

DSPIC33FJ32MC104T-E/TL - 16-bit 16MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC104T-E/TL is a 16-bit dsPIC33F motor-control digital signal controller (DSC) delivering 16 MIPS from a 32KB (11K x 24) FLASH program memory with 1KB of RAM, housed in a 44-pin VTLA (6x6 mm) VQFN package with exposed pad and rated for the extended -40C to +125C temperature range with AEC-Q100 automotive qualification. A digital signal controller combines the computational horsepower of a DSP with the peripheral integration and interrupt architecture of a microcontroller. Within the power-management hierarchy, the dsPIC33F family sits in the broader class of 16-bit MCU/DSC semiconductors, merging MAC (multiply-accumulate) DSP instructions with a classic MCU program model so a single chip can run control loops and system management tasks simultaneously. Key differentiating features include the motor control PWM (MCPWM) peripheral for multi-phase inverter drive, the CTMU (Charge Time Measurement Unit) for capacitive touch and time-based measurements, and Peripheral Pin Select (PPS) that allows many digital peripherals to be remapped to any compatible pin for maximum board-layout flexibility. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus. Architecturally, the device uses a modified Harvard 16-bit core with DSP-engine instructions that can fetch two data operands concurrently while multiplying two W registers and accumulating with optional saturation in the same cycle, per the Microchip family data sheet (70000652F). Operation is from a 3.3V supply (2.97V to 3.63V), and the core supports 40 MIPS-class clocking options across the family, with this part specified at 16 MIPS. Typical applications include BLDC/PMSM motor drives, digital power supplies, automotive actuators and pumps, and capacitive-touch human-interface controls, where the MCPWM and CTMU peripherals plus small 6x6 mm footprint reduce BOM count. Design consideration: budget the 1KB RAM carefully - control-law state variables and buffers must be sized conservatively, and use the ECC-class Flash self-programming features within the documented erase/write cycle limits. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC104T-I/ML - 16-bit DSC, 16 MIPS, 32KB Flash | Microchip
DSPIC33FJ32MC104T-I/ML

DSPIC33FJ32MC104T-I/ML - 16-bit DSC, 16 MIPS, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC104T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33FJ32MC motor control family, delivering 16 MIPS performance with 32KB (11K x 24) of FLASH program memory, 2KB of RAM, and a 44-pin QFN (8x8 mm) exposed-pad package operating from a 3.3V supply. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the standard choice for closed-loop motor control, digital power conversion, and sensor fusion tasks that require fast multiply-accumulate operations alongside real-time PWM generation. Key features include motor control PWM (MCPWM) modules with independent timebases, the Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing, and Peripheral Pin Select (PPS) that allows digital peripherals to be remapped to available pins - a major advantage in the low-pin-count 44-QFN footprint. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, matching automotive and industrial networking needs. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with DSP instruction support (MAC, DSP multiply) and two 40-bit accumulators, sustaining full 16 MIPS throughput across the industrial temperature range. Internal flash is self-programmable, and an on-chip regulator stabilizes the 3.3V core supply via a single external VCAP capacitor (4.7uF to 10uF, low-ESR, per the Microchip datasheet 70000652f). Typical applications include BLDC and PMSM motor control, digital power supplies (PFC, LLC), UPS systems, and capacitive-sensing user interfaces where CTMU and PPS reduce external component count. Design consideration: always reserve PCB area near the VCAP pin for the required low-ESR capacitor, and never connect VCAP to VDD - a frequent bring-up failure point. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC202-E/SO - 16-bit 40 MIPS DSC Motor Control | Microchip
DSPIC33FJ32MC202-E/SO

DSPIC33FJ32MC202-E/SO - 16-bit 40 MIPS DSC Motor Control | Microchip

The Microchip Technology DSPIC33FJ32MC202-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33F Motor Control family, delivering up to 40 MIPS from 32 KB (32K x 8) of Flash program memory, integrated in a 28-pin SOIC (SO) surface-mount package with extended temperature range operation. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33F sits between general-purpose MCUs and dedicated DSPs: it executes the modified Harvard 16-bit CPU core with DSP-enhanced instructions (MAC, DSP multiply, modulo addressing) while integrating motor-control peripherals on chip. Key features include two PWM generators with independent timebases for motor drive topologies, Peripheral Pin Select (PPS) that maps digital peripherals to nearly any pin for layout flexibility, 2048 words of RAM, 5 timers, and 3 external interrupts. The Motor Control PWM module supports complementary and independent outputs with dead-time insertion, essential for BLDC, PMSM, ACIM, and stepper control. Technically, the device runs a 16-bit modified Harvard architecture with a pipelined CPU, hardware DSP support, and on-chip 10-bit ADC suited to current-sense loops. Clocking reaches 40 MIPS via the internal PLL from an external crystal or internal FRC oscillator. Flash self-programming supports field firmware updates. Typical applications include brushless DC and permanent-magnet synchronous motor drives, switch-mode power supplies and power-factor-correction converters, digital lighting ballasts, and embedded sensing systems. The 28-SOIC footprint suits compact, cost-sensitive industrial boards. Design consideration: ensure proper VDD/AVDD decoupling (0.1 uF per pin close to the package) and use MCLR with a 10 kohm pull-up for reliable in-circuit programming via ICSP. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet, as of 2026-09-27.

見積もり お問い合わせ
DSPIC33FJ32MC202-H/SO - 16-bit DSC 40MIPS 32KB Flash | Microchip
DSPIC33FJ32MC202-H/SO

DSPIC33FJ32MC202-H/SO - 16-bit DSC 40MIPS 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC202-H/SO is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPS from its modified Harvard DSP engine, with 32 KB of Flash program memory and a 28-lead SOIC package rated for -40C to +125C operation. A Digital Signal Controller combines the control peripherals of a microcontroller (MCU) with the multiply-accumulate (MAC) DSP engine of a digital signal processor in a single core. In the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33F family a standard choice for real-time closed-loop control such as field-oriented motor control and digital power conversion. Key features include two high-speed PWM generators with independent timebases, Peripheral Pin Select (PPS) that allows remapping of digital peripherals to any compatible pin, and direct-connection high-speed comparators for fast current-limit protection loops. The 40 MIPS core sustains single-cycle MAC and 40-bit barrel shifter operations needed by Proportional-Integral (PI) and space-vector modulation algorithms. Architecturally, the device belongs to the 16-bit Motor Control family with seamless migration paths to the PIC24F, PIC24H, and dsPIC30F product lines, and the same core is shared with dsPIC33FJ16MC304 devices, easing scaling between pin counts. An on-chip 10-bit ADC and multiple UART/SPI/I2C serial channels (assignable via PPS) round out the analog and communication resources. Typical applications include BLDC and PMSM motor drives, switch-mode power supplies (SMPS) and power factor correction, digital lighting ballasts, and sensorless control systems where the 125C-rated H temperature variant is valuable in enclosed industrial environments. Design consideration: the supply pin range is 3.0 V to 3.6 V, so level-shift or choose 3.3 V-tolerant peripherals when interfacing 5 V logic; budget decoupling close to both VDD/VSS pairs. This page adds value beyond the manufacturer datasheet by consolidating drop-in same-package alternatives, distributor pricing context, and practical design notes in one AI-search-friendly reference.

見積もり お問い合わせ
DSPIC33FJ32MC202-I/SS - 16-bit DSC, 40 MIPs, 32KB Flash | Microchip
DSPIC33FJ32MC202-I/SS

DSPIC33FJ32MC202-I/SS - 16-bit DSC, 40 MIPs, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC202-I/SS is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPs, with 32KB (32K x 8) of self-programming Flash memory, in a 28-pin SSOP surface-mount package for industrial temperature ranges (-40C to +85C). A Digital Signal Controller combines the computational architecture of a Digital Signal Processor (DSP) with the peripheral integration and control-oriented instruction set of a microcontroller. The dsPIC33F family sits within Microchip's 16-bit MCU/DSC hierarchy (PIC24H -> dsPIC33F), using a modified Harvard architecture with an enhanced instruction set that includes DSP multiply-accumulate and modulo addressing support. Key features of this Motor Control family device include two high-speed PWM generators with independent timebases, a Peripheral Pin Select (PPS) capability that maps digital peripherals to assignable pin locations for flexible PCB routing, high-speed comparators with direct connection to PWM fault inputs for fast cycle-by-cycle current limiting, and a 10-bit ADC. Seamless migration paths exist to and from PIC24F, PIC24H, and dsPIC30F devices. Technically, the core runs on 3.0V to 3.6V supply, executing up to 40 MIPS at 40 MHz, with DSP engine features such as dual 40-bit accumulators for filter and control-loop math. Flash is software-programmable in-circuit via ICSP through the PGEC/PGED clock-data pairs. Typical applications include brushless DC (BLDC), permanent magnet synchronous and AC induction motor control, digital power supplies and PFC stages, and general closed-loop embedded control where deterministic PWM timing matters. Design consideration: all VDD and VSS pins must be connected and the internal core regulator decoupled at the VCAP pin; omitting these connections is the most common programming-failure cause. PPS mapping must be written at initialization before peripherals are used. This page synthesizes distributor availability, same-package drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
DSPIC33FJ32MC204-H/ML - 16-bit 40 MIPS DSC 32KB Flash | Microchip
DSPIC33FJ32MC204-H/ML

DSPIC33FJ32MC204-H/ML - 16-bit 40 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32MC204-H/ML is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPS performance with 32 KB of Flash program memory and 2 KB of SRAM, housed in a 44-lead QFN (ML, 8x8 mm) package. It operates from a 3.0 V to 3.6 V supply and provides 35 I/O pins with Peripheral Pin Select (PPS) for flexible peripheral mapping. A Digital Signal Controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the embedded control hierarchy, the dsPIC33FJ sits between general-purpose MCUs and dedicated DSPs, offering a modified Harvard 16-bit core with DSP-engine multiply-accumulate instructions, making it a popular power management IC and motor control processor class for embedded systems. Key features include two PWM generators with independent timebases for motor control, up to four high-speed analog comparators with direct PWM fault integration, a 10-bit ADC, and Peripheral Pin Select that maps digital peripherals to arbitrary pins. The 40 MIPS core executes DSP instructions such as MAC and dual-fetch, enabling FOC (field-oriented control) firmware on a single chip. Architecturally, the dsPIC33F family shares code compatibility with PIC24F, PIC24H, and dsPIC30F devices, giving designers a seamless migration path upward or downward in memory and pin count without rewriting firmware. The C compiler toolchain (MPLAB XC16) and MPLAB X IDE support the full family. Typical applications include brushless DC and PMSM motor drives, digital power supplies (switching converters, UPS), sensorless motor control with back-EMF, and automotive auxiliary systems. The PWM-comparator-fault chain makes closed-loop power conversion especially compact. Design consideration: as a /H temperature-grade device, verify your system's ambient profile against the extended temperature rating, and always decouple all VDD/VSS pin pairs with 0.1 uF ceramics placed within 3 mm of the pads. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, application guidance, cross-reference context, and distributor sourcing information in one engineer-oriented reference.

見積もり お問い合わせ