マイクロコントローラ

製品 (20,000+)

PIC10F204-E/P - 8-Bit Flash MCU, 384B, 4MHz | Microchip
PIC10F204-E/P

PIC10F204-E/P - 8-Bit Flash MCU, 384B, 4MHz | Microchip

The Microchip Technology PIC10F204-E/P is an 8-bit, fully static, Flash-based CMOS PIC microcontroller with 384 bytes of program memory (256 x 12 words), 16 bytes of data RAM, and 3 general-purpose I/O pins, clocked at up to 4 MHz from an internal oscillator and packaged in an 8-pin PDIP. It operates from 2.5 V to 5 V and carries the -E extended-temperature grade. An 8-bit microcontroller such as the PIC10F204 is a complete computing element: a CPU core, program Flash, working data RAM, I/O ports, and oscillator all integrated on one chip. Within the product hierarchy it sits at the lowest-cost tier of embedded processing, below 16-bit and 32-bit MCUs, where the design goal is minimal component count and minimal board area for simple control, sensing, and signal-shaping tasks rather than high-throughput computation. Key features of the PIC10F204-E/P include a RISC core with only 33 single-word, single-cycle instructions, a 12-bit wide instruction word that typically yields 2:1 code compression over competing 8-bit architectures, a fully static design that holds state in low-power operation, and an on-chip internal oscillator that eliminates an external crystal or resonator. The device operates across a 2.5 V to 5 V supply range, giving design headroom for both 3.3 V and 5 V systems. Technically, the PIC10F204 executes single-cycle instructions in approximately 1 us at 4 MHz, with only program branches taking a second cycle. Program memory is organized as 256 words of 12 bits, while the data RAM is organized as 16 x 8 bits, which defines how much working state a design can hold. Because the core is fully static, the instruction clock can be stopped without losing register contents, a feature used for wake-on-activity designs. Typical uses include low-cost on/off control for appliances and lighting, small sensor and threshold modules, timer-based control for pumps and fans, battery-backed keypads and remote controls, and simple LED indicator or relay driver boards where only a handful of I/O pins and a few hundred bytes of code are required. Design guidance: keep the I/O pins close to their loads, add 100 nF decoupling at VDD, and remember that the 384-byte Flash budget fills quickly if you use library-heavy C code; the PIC10F204-I/P is the industrial-temperature option if you do not need -40 C to +125 C range. This page combines verified distributor data, drop-in alternatives, and design notes that are not consolidated in the manufacturer datasheet itself.

見積もり お問い合わせ
PIC10F204-I/MC - 8-bit Flash MCU, 4MHz, 384B | Microchip
PIC10F204-I/MC

PIC10F204-I/MC - 8-bit Flash MCU, 4MHz, 384B | Microchip

The Microchip Technology PIC10F204-I/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin DFN (2x3 mm) package. It features a RISC architecture with 33 single-word/single-cycle instructions, executes instructions in 1 µs except for program branches (2 cycles), and integrates 384 bytes of Flash program memory (256 x 12 words), 16 bytes of SRAM data memory, and an integrated 4 MHz internal oscillator. The device targets cost-sensitive, space-constrained embedded applications where minimal PCB area and low BOM count are priorities. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage and SRAM for data), and programmable I/O peripherals on one die. The PIC10F204 sits at the very small end of the 8-bit MCU taxonomy: microcontroller -> 8-bit MCU -> PIC10 family -> 6-/8-pin entry-level Flash MCU -> general-purpose embedded controller. Its Harvard RISC architecture separates program and data buses so the CPU can prefetch the next instruction while completing the current one, achieving near 1 MIPS/MHz deterministic throughput. Key differentiating specifications include a wide 2.0V to 5.5V operating voltage range supporting both 3.3V and 5V rails, an industrial -40C to +85C temperature grade (the "I" suffix), 4 selectable I/O pins (GPIO), an 8-bit timer/counter (TMR0) with a programmable prescaler, and an integrated watchdog timer with its own on-chip RC oscillator for reliable operation independent of the system clock. The 8-bit A/D converter is not present on this specific device; designers needing analog should step up to the PIC10F206 which adds a comparator. The PIC10F204 architecture is a fully static CMOS design with no minimum clock frequency requirement, allowing the controller to be stopped in software to save power. It supports in-circuit serial programming (ICSP) via two pins (GP0/GP1), enabling firmware updates after PCB assembly. The integrated 4 MHz internal oscillator eliminates the need for an external resonator and reduces BOM cost and PCB area in space-constrained designs such as appliance controls, sensor signal conditioning, lighting controllers, and simple battery-powered gadgets. Typical applications include low-end AC line voltage monitoring (with capacitive dropper supply), battery charger status indicators, RGB LED controllers, simple fan/thermostat controls, replacement of discrete logic in toy and hobby electronics, and low-cost consumer appliance user-interface boards. The 8-pin DFN package provides excellent thermal performance and minimal footprint for handheld devices. When designing with the PIC10F204, ensure the GP3 pin (input-only on most PIC10F2xx devices) is handled correctly and that the ICSP programming pins are accessible on the PCB. Programming requires Microchip's MPLAB X IDE with XC8 compiler or the legacy MPASM assembler; the toolchain is free. Engineers upgrading should note that the PIC10F204 is not pin-compatible with the PIC10F220 or PIC12F parts that have more pins.

見積もり お問い合わせ
PIC10F204-I/P - 8-Bit 4 MHz Flash Microcontroller | Microchip
PIC10F204-I/P

PIC10F204-I/P - 8-Bit 4 MHz Flash Microcontroller | Microchip

The Microchip Technology PIC10F204-I/P is a low-cost, fully static, 8-bit, Flash-based CMOS microcontroller with a 4 MHz performance level, 384 bytes of program memory, and four I/O pins in an 8-pin PDIP package. According to the manufacturer product page, its RISC architecture contains 33 single-word instructions; most execute in one cycle, while program branches require two cycles. The part combines compact code storage with deterministic execution for embedded control tasks. An 8-bit microcontroller is a programmable semiconductor that executes firmware and manages digital inputs, outputs, timers, and other peripherals. PIC10F204-I/P belongs to the Microchip PIC10F family, which sits within the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor product categories. Its fully static operation permits the processor to remain in a stable low-activity state when clocking is stopped, depending on the device configuration. Verified distributor information identifies 384 bytes of Flash organized as 256 words by 12 bits and four general-purpose I/O lines. The manufacturer describes a compact RISC instruction set with 33 instructions, reducing code-density and learning complexity for basic control products. At the stated 4 MHz operating point, the architecture supports straightforward timing for indicators, simple user interfaces, relay logic, sensing, and low-speed control loops. The exact operating voltage, memory-map details, oscillator options, reset behavior, I/O electrical limits, and peripheral configuration are not present in the supplied snippets. Those values are therefore marked as data needed rather than inferred. Designers should use the official Microchip documentation for those details before setting operating limits, compiling firmware, or laying out the PCB. PIC10F204-I/P is appropriate for basic embedded controllers, small sensor interfaces, LED status systems, compact automation controls, and low-power products where a small Flash MCU and through-hole package simplify prototypes or servicing. Through-hole DIP construction also supports educational breadboards and manually assembled control boards. A switching supply, crystal, or larger external circuit is not justified solely from the supplied 4 MHz figure; actual peripheral and clock requirements must be checked in the complete datasheet. For firmware development, use a programmer and toolchain supported by the selected PIC10F device family. Keep firmware within the verified 384-byte Flash limit and account for bootloader, configuration-word, and application-state requirements. Because only four I/O pins are listed, confirm that the intended interface, programming connector, indicator LEDs, and external controls fit the available pins. This page consolidates manufacturer architecture details, distributor identification, sourcing links, and design-oriented guidance. It distinguishes verified facts from missing electrical data, helping engineers evaluate PIC10F204-I/P for low-complexity embedded designs without assuming unverified specifications.

見積もり お問い合わせ
PIC10F204T-I/MC - 8-bit Flash MCU, 384B, 4MHz | Microchip
PIC10F204T-I/MC

PIC10F204T-I/MC - 8-bit Flash MCU, 384B, 4MHz | Microchip

The Microchip Technology PIC10F204T-I/MC is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller in a 6-pin SOT-23 package variant (8-pin DFN/MC option as listed) with 384 bytes of Flash program memory, 16 bytes of SRAM, and a 4 MHz internal oscillator, packaged in an 8-pin DFN (2x3 mm) form factor rated -40C to +85C industrial temperature range. It employs a RISC architecture with 33 single-word/single-cycle instructions, where all instructions execute in one cycle (1 us at 4 MHz) except program branches which take two cycles, delivering an order-of-magnitude higher performance than competitors in the same price category. The 12-bit wide instructions are highly symmetrical, producing a typical 2:1 code compression over other 8-bit microcontrollers in its class, reducing flash footprint and BOM cost in space-constrained designs. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The PIC10F family represents one of the smallest commercial 8-bit MCUs, suited for glue logic replacement, simple sensor reading, and stand-alone control tasks where a full microcontroller would be over-spec. Within the broader hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC10F204 specifically targets applications previously served by discrete logic or analog timers, now replaced by programmable silicon for flexibility and lower long-term cost. Key features include a 4 MHz precision internal oscillator (no external crystal required), 4-bit programmable prescaler, GP0/GP1/GP3 digital I/O pins, an 8-bit timer (TMR0) with 8-bit programmable prescaler, and a watchdog timer with on-chip RC oscillator for reliable operation without external components. The device operates from 2.0V to 5.5V across commercial and industrial temperature grades, supporting both 3.3V and 5V rails common in consumer and industrial products. Technical depth: the PIC10F204 uses a Harvard architecture with separate program and data buses, an 8-level hardware stack, and direct/indirect addressing modes. In-Circuit Serial Programming (ICSP) allows flash reprogramming without removal from the PCB, a critical feature for field updates and production-line calibration. The 6-pin variant (PIC10F204) and 8-pin DFN variant (PIC10F204T-I/MC, with two no-connect pins for footprint compatibility) share the same silicon die. Typical applications include consumer electronics (LED blinkers, toy controllers), appliance control (coffee makers, fan speed controllers), sensor conditioning, IR remote transmitters, and battery-powered devices. The wide voltage range and ultra-low power consumption make it suitable for IoT edge nodes, smart sensor tags, and wearable accessories. Design consideration: for new designs the PIC10F204T-I/MC requires only one bypass capacitor (typically 0.1 uF) and optionally a 10 kohm pull-up on the MCLR pin. The T suffix indicates tape-and-reel packaging for high-volume SMT assembly. The I suffix denotes the industrial temperature grade (-40C to +85C). For drop-in upgrades with more program memory, see the PIC10F206T-I/MC (768 B Flash) which is pin-compatible. This page synthesizes distributor pricing, parametric drop-in alternatives, and PCB-layout design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
PIC10F206-E/P - 8-Bit 4MHz Flash MCU, 768B | Microchip
PIC10F206-E/P

PIC10F206-E/P - 8-Bit 4MHz Flash MCU, 768B | Microchip

The Microchip PIC10F206-E/P is a low-cost, high-performance 8-bit Flash-based CMOS microcontroller from the PIC10F family, housed in an 8-pin PDIP through-hole package. It integrates a 4 MHz internal oscillator, 768 bytes (512 × 12) of Flash program memory, and 24 bytes of SRAM, delivering RISC performance with only 33 single-word/single-cycle instructions across 6 I/O-capable pins. The -E suffix indicates the Extended operating temperature range of -40 °C to +125 °C, suitable for industrial and harsh-environment applications. A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and programmable I/O peripherals, enabling embedded control of mechanical, sensing, or lighting systems without a separate processor. The PIC10F family sits at the ultra-low-end of the 8-bit microcontroller hierarchy: 8-bit MCU → RISC MCU → Flash-programmable MCU → small-footprint MCU → PIC10F sub-family. Despite its minimal pin count and memory, the PIC10F206 retains the Harvard RISC core, 12-bit instruction word, and typical 2:1 code compression that characterizes the broader PIC architecture, making it ideal for cost-sensitive volume production. Key features of the PIC10F206-E/P include an internal 4 MHz oscillator that eliminates external crystal cost, a wide operating voltage range of 2.0 V to 5.5 V, six general-purpose I/O pins, an 8-bit timer (TMR0), a watchdog timer with internal oscillator, in-circuit serial programming (ICSP) for field updates, and a comparator module. The device operates from a single supply and supports power-on reset with brown-out detect, simplifying external reset circuitry in space-constrained designs. The PIC10F206 uses a 12-bit instruction word with a Harvard bus architecture, achieving one-instruction-per-clock execution at 1 µs per instruction. Its Flash program memory supports >100,000 erase/write cycles and 40-year retention, well above consumer-product lifecycle requirements. The integrated comparator, configured via firmware, can be used for analog signal detection without external op-amps, supporting low-power standby operation. Current consumption is typically in the µA range in sleep mode, enabling battery-friendly designs. Typical applications include consumer appliance control, LED lighting drivers, remote control transmitters, low-end sensor signal conditioning, battery chargers, and small motor PWM drivers. The 4 MHz core and 24 bytes of RAM limit it to control tasks rather than user-interface rich applications, but the small footprint makes it ideal for cost-optimized designs where a single function replaces discrete logic. When designing with the PIC10F206-E/P, ensure ICSP programming pins (GP0/GP1) are accessible for in-circuit firmware updates. Use decoupling capacitors of 0.1 µF close to VDD, and verify the comparator input pin configuration matches the analog input range. The device ships in a standard 8-pin PDIP footprint compatible with hand-soldered prototypes and through-hole production. This page consolidates distributor pricing, pinout, drop-in alternatives, and design guidance not found in a single source on the manufacturer datasheet.

見積もり お問い合わせ
PIC10F206-I/MC - 8-Bit 4MHz 768B Flash MCU | Microchip
PIC10F206-I/MC

PIC10F206-I/MC - 8-Bit 4MHz 768B Flash MCU | Microchip

The Microchip Technology PIC10F206-I/MC is an 8-bit, fully-static, Flash-based CMOS microcontroller from the PIC® 10F family, delivered in an 8-pin DFN (2x3 mm) exposed-pad package. It integrates a 4 MHz internal oscillator, 768 bytes (512 x 12) of Flash program memory, and 24 bytes of RAM, providing compact deterministic control for cost-sensitive embedded designs. With only 33 single-word/single-cycle instructions, the core delivers 1 MIPS performance at 4 MHz and consumes only a few hundred microamps in active mode. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory, working RAM, and configurable I/O peripherals. The PIC10F206 belongs to the 8-bit microcontrollers category, the lowest tier of the embedded computing hierarchy (8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC). Within Microchip's portfolio it sits inside the PIC10F2xx sub-family, the smallest-footprint Flash PIC family, optimized for pin- and area-constrained designs that previously required discrete logic or ASICs. Key features include three general-purpose I/O pins, a precision 4 MHz internal oscillator (no external crystal required), in-circuit serial programming (ICSP), an 8-bit timer/counter (TMR0) with programmable prescaler, a watchdog timer with its own on-chip RC oscillator, and an integrated comparator module. The device operates over the industrial temperature range of -40C to +85C and accepts supply voltages from 2.0 V to 5.5 V, allowing direct connection to 2xAA batteries, 3.3 V or 5 V rails. Its 8-pin DFN package (2 mm x 3 mm) makes it one of the smallest general-purpose microcontrollers available, replacing dozens of discrete logic gates while adding programmability. The architecture uses a RISC-style Harvard design with a 12-bit wide instruction word, achieving roughly 2:1 code compression over typical 8-bit CISC cores in the same class. All instructions execute in a single instruction cycle (1 microsecond at 4 MHz) except program branches, which take two cycles. The Flash memory supports 10,000 erase/write cycles minimum and the device retains code for over 40 years, supporting field-upgradeable firmware via ICSP. Typical applications include battery-powered consumer accessories, LED color controllers, electronic toys, fan/lighting PWM control, simple sensor signal conditioning, and replacement of discrete logic in space-constrained products. The wide operating voltage and low cost make it a common choice in disposable IoT tags and high-volume consumer electronics. Designers should note that the device has only 6 usable pins (GP0-GP2 plus GP3/MCLR/VPP and VDD/VSS), so applications must be tightly resource-budgeted. Program memory must fit in 512 12-bit words, and the stack is only two levels deep, restricting interrupt nesting and subroutine depth. For designs needing more I/O, more memory, or peripheral sets such as ADC or PWM, step up to PIC12F or PIC16F families.

見積もり お問い合わせ
PIC10F206-I/P - 8-Bit 4MHz Flash MCU, 768B | Microchip
PIC10F206-I/P

PIC10F206-I/P - 8-Bit 4MHz Flash MCU, 768B | Microchip

The Microchip PIC10F206-I/P is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin PDIP through-hole package. It integrates a 4 MHz internal oscillator, 768 bytes of Flash program memory (512 x 12 words), 24 bytes of SRAM data memory, and a 6-bit ADC-like comparator peripheral, while presenting only 4 user I/O pins in this 8-pin PDIP form factor. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a single-chip computer built around an 8-bit data path and non-volatile Flash program memory, used to execute simple embedded control tasks. In the system hierarchy it sits below 16-bit and 32-bit MCUs in cost and complexity, but above pure hardware logic in flexibility, making it the workhorse of cost-driven consumer, industrial, and appliance products. The PIC10F family represents the smallest and most economical tier within Microchip's PIC portfolio. Key features include RISC architecture with 33 single-word/single-cycle instructions, 1 microsecond instruction execution at 4 MHz, an internal 4 MHz oscillator that eliminates external clock components, an integrated 6-bit analog comparator with 0.6V reference, and a wide 2.0V to 5.5V operating voltage range. The device consumes very low current in sleep mode, making it well suited to battery-powered or energy-harvesting designs. Technically the PIC10F206 uses a Harvard architecture with separate code and data buses, allowing instruction fetch and operand access in a single cycle. It supports in-circuit serial programming (ICSP), enabling firmware updates after PCB assembly and reducing manufacturing cost. The on-chip watchdog timer with its own on-chip RC oscillator adds robustness against code lockups in unattended applications. Typical applications include LED blinkers and decorative lighting, simple fan or pump controllers, low-end remote-control transmitters, battery chargers, sensor signal conditioning, and pin-compatible upgrades in designs originally based on PIC10F200, PIC10F202, or PIC10F204. The compact 8-pin PDIP form factor also simplifies breadboarding for hobby and education use. When designing with this part, remember that only 4 of the 8 pins are usable as general-purpose I/O because two pins are reserved for ICSP and one for VDD/MCLR sharing. Always reserve the ICSP clock and data lines for in-system programming access during prototyping. This page consolidates distributor pricing, drop-in alternatives within the PIC10F2xx family, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC10F220-E/MC - 8-bit Flash MCU, 384B, 8MHz, 8-DFN | Microchip
PIC10F220-E/MC

PIC10F220-E/MC - 8-bit Flash MCU, 384B, 8MHz, 8-DFN | Microchip

The Microchip Technology PIC10F220-E/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in an 8-pin DFN (2x3 mm) exposed-pad package. It combines 384 bytes of Flash program memory, 16 bytes of RAM, an 8 MHz internal oscillator, and a 12-bit ADC with up to 4 analog channels in a footprint barely larger than an SOT-23. According to the Microchip PIC10F220/222 datasheet (DS40001270F), it executes 33 single-word, single-cycle RISC instructions, with branches taking two cycles, delivering roughly 1 MIPS performance from a 4 MHz oscillator. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and one or more peripherals such as ADCs, timers, and communication interfaces. Within the broader hierarchy, the PIC10F220 belongs to the 8-bit MCU class, sits under the Microchip PIC10F family, and ultimately falls under embedded microcontrollers -> integrated circuits. Its 6-pin I/O capability makes it one of the smallest general-purpose Flash MCUs available. Key features include ultra-low-power operation with typical sleep current in the nanoampere range, an internal 8 MHz oscillator with calibration, an 8-bit timer/counter (TMR0) with a programmable prescaler, and a 12-bit ADC with up to 4 input channels multiplexed onto shared package pins. The wide 2.0 V to 5.5 V operating range supports battery-powered designs including single-cell Li-ion, two-cell AA, and 3.3 V regulated rails. A factory calibrated internal oscillator eliminates the need for an external resonator, saving both BOM cost and PCB area. Architecturally, the PIC10F220 uses a Harvard RISC core with separate program and data buses, single-cycle instruction execution (except program branches), and a 12-bit wide instruction word that achieves roughly 2:1 code compression versus typical 8-bit CISC architectures. The integrated 12-bit ADC provides finer resolution than the 8-bit ADCs found on many entry-level MCUs, making the device well-suited to sensor conditioning tasks where quantization error must be minimized. Typical applications include low-cost battery-powered sensor nodes, single-channel LED drivers, fan/relay controllers, toy electronics, smart cable replacements, wearable accessories, and cost-sensitive consumer white goods. Designers should pay particular attention to the 8-pin DFN exposed-pad requirement - the thermal pad must be soldered to the board ground pour to meet the package thermal and electrical ratings, and a minimum of 0.1 uF Vdd decoupling must be placed within a few millimetres of the supply pin. This page synthesizes distributor pricing, parametric comparison data, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. Information is current as of 2026-09-14.

見積もり お問い合わせ
PIC10F220-E/OT - 8-bit MCU, 384B Flash, 4 I/O, SOT-23-6 | Microchip
PIC10F220-E/OT

PIC10F220-E/OT - 8-bit MCU, 384B Flash, 4 I/O, SOT-23-6 | Microchip

The Microchip Technology PIC10F220-E/OT is an 8-bit, fully-static, Flash-based CMOS microcontroller in a 6-pin SOT-23-6 package, offering 384B (256 x 12) of Flash program memory, 16 x 8 bytes of RAM, and 4 I/O pins, running at a clock speed of 8 MHz with an internal oscillator. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals on a single die. It belongs to the broader hierarchy of microcontrollers -> embedded controllers -> processors -> semiconductors. The PIC10F220 specifically sits at the entry level of the PIC® 10F family, the smallest-footprint 8-bit MCUs from Microchip, designed for cost- and space-constrained applications that still need Flash programmability and an analog-to-digital converter (ADC). Key features include RISC architecture with 33 single-word/single-cycle instructions (single-cycle execution at 1 µs except branches, which take two cycles), 12-bit wide instructions delivering roughly 2:1 code compression versus competing 8-bit MCUs, and an internal 8 MHz oscillator. The device integrates a small set of peripherals tuned for glue-logic replacement, including an 8-bit ADC and comparators. The SOT-23-6 footprint measures approximately 2.9 mm x 1.6 mm, enabling placement where even a SOIC-8 cannot fit. Technically, the PIC10F220 uses a Harvard architecture with separate program and data buses, which is why the Flash word is 12 bits wide (instruction-aligned) while the RAM is 8 bits wide (data-aligned). The internal 8 MHz oscillator is factory-trimmed, removing the need for an external crystal and reducing BOM cost. The 4 I/O pins are multiplexed with VDD, VSS, GP3 (input-only), and the ADC/comparator inputs, requiring careful pin assignment at firmware level. Typical applications include low-cost logic replacement in consumer and appliance products, LED blinkers and indicator controllers, battery chargers, simple sensor interfaces, and personal-care devices. The combination of Flash memory, an internal oscillator, and an SOT-23-6 footprint makes the part attractive for high-volume products where every square millimeter of PCB matters. A key design consideration is that this -E variant operates across the -40 °C to +125 °C extended temperature range. The 4 I/O limit means GPIO-heavy tasks are out of scope, and the 384B Flash budget constrains application complexity. The PIC10F322 is the recommended migration path when more memory or peripherals are needed. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that are not assembled in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC10F220-E/P - 8-bit Flash MCU, 384B, 4 I/O, 8MHz | Microchip
PIC10F220-E/P

PIC10F220-E/P - 8-bit Flash MCU, 384B, 4 I/O, 8MHz | Microchip

The Microchip Technology PIC10F220-E/P is an 8-bit, fully-static, Flash-based CMOS microcontroller in the PIC10F family, packaged in an 8-pin PDIP through-hole format. It integrates 384B (256 x 12) of program memory, 16B of RAM, and a 4-channel 8-bit A/D converter, all operating from a single internal oscillator up to 8 MHz. The device executes 33 single-word/single-cycle RISC instructions, delivering roughly 1 MIPS of compute throughput while consuming only a few hundred microamps of active current. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a small computer-on-a-chip built around an 8-bit data path, with non-volatile Flash program memory that can be re-written in-circuit. PIC microcontrollers occupy the microcontroller -> embedded controller -> semiconductor hypernym chain, and within that taxonomy the PIC10F family sits at the smallest, lowest-cost end for glue logic, timer, and simple analog sensing tasks. Key features include 4 user-configurable I/O pins on an 8-pin DIP, an internal 8 MHz oscillator (no external crystal required), 16 bytes of RAM, and an analog comparator plus an 8-bit A/D converter. The PIC10F220 specifically omits the PWM output that the closely related PIC10F222 provides, keeping the die minimal for cost-sensitive applications. The device operates across 2.0V to 5.5V, supports in-circuit serial programming (ICSP), and offers a brown-out reset and power-on reset. Architecturally, the PIC10F220 uses a Harvard RISC core with a 12-bit instruction word that achieves approximately 2:1 code compression versus typical 8-bit CISC alternatives. The integrated A/D converter samples up to 4 channels at 8-bit resolution, useful for direct sensor interfacing without external ADC chips. The wide operating voltage and low power make it a strong fit for battery and energy-harvesting designs. Typical applications include low-cost logic replacement, simple sensor interfaces (temperature, light, voltage monitoring), battery chargers, LED drivers, consumer appliance control, and standalone timers. Designers value the 8-pin PDIP for breadboard-friendly prototyping and hand-soldered rework in low-volume products. When designing with the PIC10F220-E/P, observe the 5.5V absolute maximum on VDD and ensure decoupling caps of 0.1 uF are placed as close to the supply pin as possible. Because only 4 I/O are available, pin function selection (digital I/O vs analog input vs reset) must be planned carefully during schematic capture. This page combines datasheet specifications, real distributor pricing, verified drop-in alternatives (with same-brand PIC10F family variants prioritized), and practical design notes that go beyond what the manufacturer datasheet provides.

見積もり お問い合わせ
PIC10F220-I/P - 8-bit MCU 384B Flash 8MHz | Microchip | DIP-8
PIC10F220-I/P

PIC10F220-I/P - 8-bit MCU 384B Flash 8MHz | Microchip | DIP-8

The Microchip Technology PIC10F220-I/P is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller in an 8-pin PDIP package. It features 384 bytes of Flash program memory (256 x 12 words), 16 bytes of SRAM, a 6-bit ADC, and executes instructions at 8 MHz with a 1 µs instruction cycle (except branches, which take two cycles). The RISC architecture provides only 33 single-word/single-cycle instructions, delivering an order of magnitude higher performance than competitors in the same price category. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and GPIO onto one die. Microcontrollers sit at the bottom of the embedded compute hierarchy: microcontroller -> embedded processor -> microprocessor -> CPU, and within the 8-bit MCU category they include subfamilies such as PIC10, PIC12, PIC16, PIC18, and ATtiny/ATmega. The PIC10F220 belongs to the PIC10F 6-pin/8-pin ultra-small-footprint family, optimized for analog-intensive, cost-driven applications where every GPIO and PCB square millimeter matters. Key features of the PIC10F220-I/P include an integrated 6-bit analog-to-digital converter (ADC), one 8-bit timer (TMR0), a watchdog timer with on-chip RC oscillator, power-on reset, in-circuit serial programming (ICSP), and an internal 4 MHz / 8 MHz oscillator that eliminates the need for an external crystal. The device supports a wide operating voltage range from 2.0V to 5.5V, making it compatible with both 3.3V and 5V rails common in consumer and industrial systems. The 12-bit-wide instruction set is highly symmetrical, producing a typical 2:1 code compression compared with other 8-bit microcontrollers in its class, so application code fits in less Flash and requires fewer fetches. Combined with Harvard-style separate program and data buses, the device delivers deterministic single-cycle execution on most instructions, which simplifies real-time control loops. Typical applications include appliance controls, LED driving, battery chargers, toys, simple sensor signal conditioning, and any cost-sensitive embedded system that needs an 8-bit brain in an 8-pin footprint. Engineers also deploy the PIC10F220 in auxiliary housekeeping roles where it acts as a power-sequence supervisor or PWM controller for a larger SoC. When designing with this part, note that the 8-pin PDIP package makes hand-prototyping and breadboard-friendly rework easy. The device shares its instruction set with the broader PIC10/12/16 family, so code written for the PIC10F220 ports to larger PICs with minimal modification, and the ICSP interface allows firmware updates without removing the chip from the board. This page synthesizes XAIPART pricing tiers, drop-in PIC10F2xx alternatives, and engineering design notes not found in the bare Microchip datasheet, giving buyers and embedded engineers a single decision-ready reference.

見積もり お問い合わせ
PIC10F220T-E/OT - 8-Bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip
PIC10F220T-E/OT

PIC10F220T-E/OT - 8-Bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip

The Microchip PIC10F220T-E/OT is an 8-bit, fully-static Flash-based CMOS microcontroller in a 6-pin SOT-23-6 surface-mount package, delivering 8 MIPS performance from a 33-instruction RISC core with 384 bytes of program memory (256 x 12 words) and 16 bytes of data RAM. It operates across an extended industrial temperature range of -40C to +125C, making it suitable for harsh-environment consumer and industrial embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one die. Within the taxonomy, the PIC10F220 belongs to the 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor hierarchy. Its tiny 6-pin SOT-23 footprint positions it as a minimal-pin-count MCU sub-category, ideal for replacing discrete logic gates or analog timers in space-constrained designs. Key features include a 4-channel 8-bit Analog-to-Digital Converter (ADC) with external and internal voltage references, one 8-bit timer (Timer0), an MCLR reset input, GPIO, and 16 bytes of RAM supporting up to 4 MHz internal oscillator operation. The device operates from 2.0V to 5.5V supply voltage, has 4 I/O pins, and includes Flash program memory that can be written thousands of times. Low-power consumption makes it ideal for battery-powered and energy-harvesting applications. Technically, the PIC10F220 employs a Harvard architecture with separate program and data buses, enabling single-cycle instruction execution except for program branches (2 cycles). The Flash memory uses 12-bit-wide instruction words, providing 2:1 code compression over competing 8-bit architectures, and supports in-circuit serial programming (ICSP) for field upgrades. Typical applications include LED lighting controllers, battery chargers, smart sensors, simple motor control, and consumer appliance interfaces. The extended -40C to +125C temperature range also enables automotive and industrial sensor signal conditioning modules. Design consideration: when selecting this part, ensure that 4 GPIO pins are sufficient for your application - the PIC10F220 is intentionally minimal and requires pin multiplexing for complex interfaces. For applications needing more I/O, consider PIC12F or PIC16F families. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a 360-degree view for procurement and engineering teams evaluating the PIC10F220T-E/OT.

見積もり お問い合わせ
PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip
PIC10F220T-I/MC

PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip

The Microchip Technology PIC10F220T-I/MC is a low-cost, high-performance, 8-bit, fully-static Flash-based CMOS microcontroller in a 6-pin/8-pin DFN (2x3 mm) package. It executes 33 single-word/single-cycle RISC instructions at 8 MHz, providing 8 MIPS throughput with most instructions completing in 1 us and program branches in 2 us. The device integrates 384 bytes of Flash program memory (256 x 12 words), 16 bytes of RAM, and a 6-channel 8-bit A/D converter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals into one package. Within the broader taxonomy, the PIC10F220 belongs to the 8-bit microcontroller hypernym, the PIC10F family, and the Microchip PIC10F2xx sub-family. It is purpose-built for glue-logic replacement, logic-level translation, and ultra-compact analog or digital control nodes where board area and BOM cost dominate the design. Key features include 4 MHz internal oscillator calibration within +/-1 percent, an 8-bit timer/counter (TMR0), a watchdog timer with on-chip oscillator, an 8-bit A/D converter with up to 6 input channels, and an in-circuit serial programming (ICSP) interface. The device operates across 2.0V to 5.5V, with a 1.8V brown-out-reset option, and supports industrial -40C to +85C temperature range. The I suffix confirms the industrial operating range; the T suffix denotes tape-and-reel packaging. The PIC10F220 employs a RISC Harvard architecture with separate program and data buses, a 12-bit instruction word, and a deterministic two-stage pipeline. A comparator and internal voltage reference (0.6V nominal) are integrated for analog signal conditioning without external components. Power management features include an ultra-low-power sleep mode with wake-on-change I/O and selectable oscillator modes for system-level energy optimization. Typical applications include consumer-electronics remote controls, battery chargers, LED driver controllers, sensor signal conditioning, low-power security sensors, and industrial control logic. The combination of 6 I/O pins, integrated ADC, and tiny DFN package makes it ideal for space-constrained designs. When designing, ensure decoupling caps are placed close to VDD, avoid using GP3 as input only (it is input-only), and leverage the internal 4 MHz oscillator to minimize external component count. Consider the newer PIC10F322 for new designs, which adds more memory, PWM, and a CWG. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop source for sourcing and design-in decisions.

見積もり お問い合わせ
PIC10F220T-I/OT - 8-bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip
PIC10F220T-I/OT

PIC10F220T-I/OT - 8-bit MCU, 384B Flash, 8MHz, SOT-23-6 | Microchip

The Microchip Technology PIC10F220T-I/OT is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller housed in a 6-pin SOT-23-6 surface-mount package. It features 384 bytes of Flash program memory (256 x 12 words), 16 bytes of RAM, an 8 MHz internal oscillator, and a 12-I/O architecture implemented across six external pins. The device executes 33 single-word/single-cycle RISC instructions and operates from 2.0 V to 5.5 V across the industrial -40 C to +85 C range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. Within the broader category, the PIC10F family represents the smallest-footprint members of Microchip's 8-bit PIC portfolio, designed for cost-sensitive applications where PCB area is at a premium. Their hypernyms include: microcontroller -> embedded controller -> semiconductor device. The PIC10F220 belongs to the mid-2020s "10F" lineage (PIC10F200/202/204/206/220/222) and shares die architecture with siblings that add ADC, comparator, or more memory. Key features of the PIC10F220 include an 8 MHz internal oscillator (4 MIPS throughput at 2:1 divider-free pipeline), in-circuit serial programming (ICSP), a watchdog timer with its own on-chip RC oscillator, and power-on reset. Its ultra-compact SOT-23-6 outline enables drop-in use in tight layouts such as in-line cable assemblies, SMD LEDs with logic, and appliance subsystems. Power-saving SLEEP mode draws nanoamp-level current, suiting battery-powered or energy-harvesting designs. Technically, the PIC10F220 uses a Harvard RISC architecture with separate program and data buses, which allows instruction fetch and operand access in a single clock cycle. Its 12-bit-wide instruction word and 8-bit data path deliver typical 2:1 code compression over competitive 8-bit CISC alternatives. The 6-pin limitation forces designers to multiplex I/O, typically using GP0/GP1 as ICSP, GP3 as reset-only input, and GP2/GP4/GP5 for application logic. Typical applications include LED blinkers, consumer IR remote controls, PWM fan tachometers, electronic fuses, in-line cable repeaters, and simple logic replacements. The wide 2.0 V-5.5 V supply range also enables direct 2xAA, CR2032, or USB-derived 5 V rails. When migrating, note that PIC10F220T-E/OT is the extended-temperature variant (-40 C to +125 C) in the same SOT-23-6 package, while PIC10F220-I/P is the DIP-8 version with two extra I/O lines. For design-in, ensure the ICSP pins (GP0/GP1) are accessible on the PCB for in-circuit programming, and use the MCLR/GP3 pin as a reset input. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the official Microchip datasheet.

見積もり お問い合わせ
PIC10F222-E/MC - 8-bit Flash MCU 768B 4 I/O 8DFN | Microchip
PIC10F222-E/MC

PIC10F222-E/MC - 8-bit Flash MCU 768B 4 I/O 8DFN | Microchip

The Microchip PIC10F222-E/MC is a low-cost, high-performance 8-bit fully-static Flash-based CMOS microcontroller built around a RISC architecture with 33 single-word, single-cycle instructions (1 µs per instruction at 4 MHz, except program branches which take two cycles). It integrates 768 bytes of Flash program memory, 23 bytes of RAM, a 4-channel 8-bit A/D converter, and four I/O pins in an 8-pin DFN (MC) exposed-pad package. The device supports operating voltages of 2.0V to 5.5V and internal oscillator options of 4 MHz and 8 MHz, with the -E (Extended) temperature grade spanning -40 °C to +125 °C. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates a CPU, RAM, non-volatile program memory (Flash), peripherals and I/O on a single die. Within the broader semiconductor hierarchy, MCUs sit inside the microcontroller product class, which in turn belongs to the integrated circuit family of digital logic devices used for embedded control. The PIC10F222 belongs to Microchip's PIC10 baseline family, which is the smallest-footprint branch of the PIC architecture tree, optimized for cost-sensitive and space-constrained applications where the design needs a small amount of intelligence with very few external pins. Key differentiating features include 33 single-cycle RISC instructions (compared with typically 35-50 instructions in CISC competitors in the same price band), 2:1 code compression relative to other 8-bit MCUs in its class, an integrated 8-bit ADC eliminating the need for an external converter, and four I/O lines plus one input-only GP3 line. The Flash memory enables in-system reprogramming via ICSP, supporting fast customization of application parameters such as transmitter codes, appliance settings, and receiver frequencies without removing the device from the board. The PIC10F222's architecture uses a 12-bit wide instruction word with Harvard-style separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. This pipeline delivers an effective throughput of approximately 4 MIPS at 4 MHz and 8 MIPS at 8 MHz, and the device operates fully statically (no minimum clock), enabling low-power sleep currents well-suited for battery-powered applications. The integrated 8-bit ADC with up to four input channels simplifies designs that need to measure analog signals such as light, temperature (via a thermistor), or potentiometer positions without external conversion hardware. Typical applications include adding intelligence to LED lighting systems, low-cost remote-control transmitters, small appliance controllers, battery chargers, and consumer electronics such as toys and decorative lighting. The device's small footprint and low pin count make it well suited for designs where PCB real estate is at a premium but some level of programmable logic is required beyond simple discrete or analog circuitry. When designing with the PIC10F222, ensure that the exposed pad (EP) of the DFN package is soldered to the board ground plane for proper thermal dissipation and electrical performance. Decoupling capacitors of 0.1 µF should be placed as close as possible to the VDD pin, and unused I/O pins should be configured as outputs low or inputs with internal weak pull-ups to minimize power consumption in sleep mode. This page synthesizes distributor pricing, drop-in alternatives within the PIC10F family, and practical design notes that go beyond the standard Microchip datasheet content, providing engineers and procurement teams with a one-stop decision matrix for the PIC10F222-E/MC.

見積もり お問い合わせ
PIC10F222-E/P - 8-Bit 8MHz Flash MCU | Microchip Technology
PIC10F222-E/P

PIC10F222-E/P - 8-Bit 8MHz Flash MCU | Microchip Technology

The Microchip Technology PIC10F222-E/P is a low-cost, 8-bit, flash-based CMOS microcontroller with a maximum clock frequency of 8 MHz, 768 bytes of program memory, 16 bytes of RAM, and an 8-pin through-hole DIP package. It uses the PIC10 RISC core with 33 single-word, single-cycle instructions, making it suitable for compact embedded-control products that need inexpensive programming, reconfigurable logic, and analog-to-digital conversion. A microcontroller is a programmable semiconductor system that integrates a CPU core, program memory, data memory, and peripherals on one chip. The PIC10F222 belongs to the Microchip PIC10 family and combines a general-purpose 8-bit microcontroller architecture with flash-based configuration storage. Its fully static CMOS implementation is appropriate for embedded products that operate from a fixed supply and must maintain deterministic low-power behavior between external events. The principal features of the PIC10F222-E/P include an 8-bit CPU, 33 RISC instructions, a 20-word program memory page structure, 768 bytes of flash program memory, and 16 bytes of data RAM. The device includes one 8-bit Analog-to-Digital Converter, four general-purpose I/O pins, a general-purpose input pin, and a multifunction MCLR/VPP pin. These resources allow a compact controller to combine digital control and analog measurement without requiring a separate ADC. The CPU executes most instructions in one cycle, corresponding to 1 microsecond at the 8 MHz operating frequency. Program branches require two cycles, and the 12-bit instruction word provides code density for a small embedded controller. The flash-based architecture allows application firmware and configurable control parameters to be programmed or rewritten according to Microchip's programming specifications, supporting product customization and field updates where the end application permits reprogramming. Typical uses include compact appliance controls, simple sensor interfaces, low-cost timers, LED sequencers, small motor or relay-control systems, battery-operated products, and general-purpose embedded-control boards. The PIC10F222-E/P is especially appropriate when a PCB requires a through-hole package, modest processing capacity, one ADC channel, and only a small number of I/O lines. The LCSC listing identifies the device as an 8-bit MCU and reports availability from $0.3689 in stock, subject to market movement. Designers should preserve the MCLR/VPP behavior required by the selected programming method and confirm the oscillator, reset, and I/O configuration against the manufacturer data sheet before layout release. Because this is an 8-pin device with four general-purpose I/O pins, pin multiplexing must be checked in software. PCB artwork should follow the official 8-pin DIP footprint, and production programming should use the manufacturer's validated programming specification. This page consolidates verified manufacturer and distributor information, separates the target grade from related catalog entries, identifies the verified 8 MHz, flash, RAM, package, and ADC characteristics, and explains where exact pin, packaging, and procurement data must still be confirmed. It also records the available same-family drop-in candidate without presenting cross-package or functional equivalents as direct replacements.

見積もり お問い合わせ
PIC10F222-I/MC - 8-Bit 8MHz MCU 768B Flash 8-DFN | Microchip
PIC10F222-I/MC

PIC10F222-I/MC - 8-Bit 8MHz MCU 768B Flash 8-DFN | Microchip

The Microchip Technology PIC10F222-I/MC is an 8-bit, fully-static, Flash-based CMOS microcontroller in a compact 8-pin DFN (2x3 mm) package. It integrates 768 bytes of Flash program memory, 23 bytes of SRAM data RAM, and runs at up to 8 MHz clock speed with 33 single-cycle RISC instructions. The -I suffix indicates the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash or ROM), working memory (RAM), and peripheral interfaces (GPIO, ADC, timers) into one package. Microcontrollers in the PIC10 family occupy the ultra-small-footprint end of the market, targeting applications where PCB space and BOM cost dominate the design trade-off. The PIC10F222 specifically adds a 4 MHz internal oscillator option alongside the default 8 MHz oscillator, providing flexibility for low-power or timing-sensitive applications. Key features include 4 I/O pins (3 bidirectional GP0/GP1/GP2 + 1 input-only GP3), one 8-bit timer (TMR0) with watchdog, an analog comparator, and an 8-bit ADC. The device operates from 2.0V to 5.5V supply voltage and consumes very low current, making it well-suited for battery-powered designs. The wide VDD range permits direct connection to 2-cell battery stacks as well as regulated 3.3V or 5V rails. Architecturally, the PIC10F222 uses a Harvard RISC core with a 12-bit instruction word and 8-bit data path. Single-cycle instruction execution (1 microsecond at 4 MHz) delivers approximately 1 MIPS of throughput, an order of magnitude higher than 8-bit competitors in the same price tier. The in-circuit serial programming (ICSP) interface allows Flash reprogramming without removing the part from the board. Typical applications include consumer remote controls, IR transmitter/receiver circuits, small appliance control, LED decorative lighting, battery-powered toys, and simple sensor signal conditioning. The 4 I/O pins limit use to highly cost-sensitive or space-constrained designs where a few GPIO plus ADC and timer suffice. When designing with the PIC10F222-I/MC, allocate the 8-pin DFN footprint carefully because only 4 pins are usable as general-purpose I/O. Decouple VDD with a 0.1 uF ceramic capacitor placed within 5 mm of the supply pin, and ensure MCLR is tied to VDD through a 10 kohm resistor or driven externally for ICSP. This page synthesizes current distributor pricing, package-compatible drop-in alternatives, and practical design considerations not consolidated on any single manufacturer or distributor page.

見積もり お問い合わせ
PIC10F222-I/P - 8-Bit 8MHz Flash MCU 8-PDIP | Microchip
PIC10F222-I/P

PIC10F222-I/P - 8-Bit 8MHz Flash MCU 8-PDIP | Microchip

The Microchip Technology PIC10F222-I/P is an 8-bit, fully static, Flash-based CMOS microcontroller with an 8 MHz operating speed, 768 bytes of program Flash organized as 512 x 12 words, and 16 bytes of RAM in an 8-pin through-hole DIP package. It combines a compact RISC architecture with 33 single-word instructions, an integrated analog-to-digital converter, and embedded nonvolatile Flash memory for firmware storage. What is an 8-bit Flash microcontroller? An 8-bit Flash microcontroller is a small embedded-control semiconductor that executes a reduced instruction set on an 8-bit data path and stores its application program in electrically rewritable nonvolatile memory. Within the product hierarchy, PIC10F222-I/P is a Flash microcontroller, an embedded processor, a semiconductor, and a member of the PIC10F family. Its combination of program memory, RAM, peripherals, and eight pins makes it suitable for compact control products that require more capability than a basic logic device but less complexity than a larger general-purpose MCU. Key verified features include a 33-instruction RISC architecture, 768 bytes of Flash, and 16 bytes of RAM. The manufacturer states that all instructions execute in one cycle, while program branches require two cycles. At an 8 MHz operating speed, the architecture supports predictable control-loop timing without requiring external memory. The small 8-PDIP package also supports conventional breadboards, through-hole prototype boards, and hand-soldered assemblies. The PIC10F222 uses the same compact RISC concept associated with Microchip's baseline PIC devices. Its 12-bit-wide instruction organization provides a practical balance between code density and an eight-bit hardware architecture. Fully static CMOS construction allows execution to stop when required, while on-board Flash permits application code, configuration values, transmitter codes, appliance settings, or receiver frequencies to be customized quickly and conveniently. Typical uses include simple standalone controllers, appliance interfaces, compact remote transmitters, receiver controls, configuration products, and low-cost embedded automation. The PIC10F222-I/P is particularly appropriate when firmware must be retained in a small through-hole package and the application needs basic digital I/O plus analog measurement rather than a high pin count or high peripheral bandwidth. For PCB design, preserve the manufacturer's pin numbering and keep the decoupling and programming connections accessible. Because the verified data does not provide a complete electrical pin description, voltage limits, current ratings, or a full pin table, engineers must consult the official PIC10F220/222 data sheet before final schematic or layout release. This page distinguishes documented facts from parameters that still require design verification.

見積もり お問い合わせ
PIC10F222T-E/OT - 8-bit Flash MCU, 768B Flash, SOT-23-6 | Microchip
PIC10F222T-E/OT

PIC10F222T-E/OT - 8-bit Flash MCU, 768B Flash, SOT-23-6 | Microchip

The Microchip Technology PIC10F222T-E/OT is a low-cost, high-performance 8-bit, fully-static, Flash-based CMOS microcontroller housed in a 6-pin SOT-23 (E/OT, Tape & Reel) package. It employs a RISC architecture with 33 single-word, single-cycle instructions and ships with 768 bytes of Flash program memory and 16 bytes of SRAM. The device executes one instruction per cycle (1 microsecond at 8 MHz), except program branches which take two cycles. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable I/O peripherals. Within the broader taxonomy, the PIC10F222 belongs to the 8-bit microcontroller family, specifically the PIC10F sub-family, which sits under the power-management and embedded-control hierarchy. These ultra-small RISC MCUs are optimized for space-constrained and cost-sensitive applications where a few-pin, deterministic controller can replace discrete analog or logic circuitry. Key features of the PIC10F222T-E/OT include an 8 MHz internal oscillator, four (or three, depending on configuration) general-purpose I/O pins, an integrated 8-bit A/D converter with up to three input channels, an analog comparator, an 8-bit timer (TMR0) with an 8-bit programmable prescaler, a Watchdog Timer with its own on-chip RC oscillator, and a wide operating voltage range from 2.0 V to 5.5 V. The device also includes an in-circuit serial programming (ICSP) interface, Power-on Reset, and code protection. Architecturally, the PIC10F222T-E/OT uses a Harvard-bus RISC core with a 12-bit-wide instruction word, providing 2:1 code compression versus typical 8-bit CISC competitors. The 6-pin SOT-23 footprint enables the smallest possible PCB implementations while still delivering a programmable analog and digital platform. The -E temperature grade supports -40 degrees C to +125 degrees C operation, making the part suitable for industrial and harsh-environment designs. Typical applications include LED lighting drivers, battery chargers, sensor signal conditioning, simple closed-loop fan or motor control, replacement of discrete logic timers, and ultra-compact consumer appliances. The combination of analog comparators and an A/D converter also makes the part useful for system supervision tasks such as battery voltage monitoring. Designers should note that the PIC10F222T-E/OT uses only six pins, so designers must plan carefully between GP0/GP1/GP2/GP3 (GP3 is input-only) and the FOSC/VDD/VSS pins. Programming is performed via ICSP on GP0 and GP1, which therefore reduces those pins to general-purpose digital I/O after programming. The internal 8 MHz oscillator is factory-calibrated to within 1 percent, eliminating the need for an external crystal. This page synthesizes distributor pricing, drop-in SOT-23-6 alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC10F222T-I/OT - 8-bit PIC MCU, 768B Flash, SOT-23-6 | Microchip
PIC10F222T-I/OT

PIC10F222T-I/OT - 8-bit PIC MCU, 768B Flash, SOT-23-6 | Microchip

The Microchip Technology PIC10F222T-I/OT is a low-cost, high-performance, 8-bit, fully-static Flash-based CMOS microcontroller that delivers 8 MIPS throughput from a 33-instruction RISC core housed in a 6-pin SOT-23-6 surface-mount package. It integrates 768 bytes of Flash program memory (512 x 12 words), 16 bytes of RAM, and an 8-bit A/D converter with up to 3 input channels for compact mixed-signal designs. What is a PIC10F microcontroller? The PIC10F family is the smallest footprint 8-bit PIC microcontrollers from Microchip Technology, built around a RISC architecture that executes instructions in a single cycle (200 ns at 20 MHz, 1 µs at 8 MHz). The hierarchy is: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. PIC10F devices target cost- and space-constrained applications where a few GPIO pins and a small AFE are sufficient, replacing discrete logic with programmable intelligence. Key differentiating specifications include 1.8V to 5.5V wide operating voltage, ultra-low-power nanoWatt technology with <1 µA standby current, 33 single-word/single-cycle instructions (excluding branches), and on-chip 4 MHz internal oscillator. The PIC10F222T-I/OT variant adds an 8-bit ADC plus a PWM module, distinguishing it from PIC10F200/PIC10F204 siblings. Architecturally, the part employs a Harvard-style core with separate program and data buses, allowing instruction fetch and operand access in the same clock cycle. The 8-bit successive-approximation ADC runs up to 100 ksps with the on-chip RC oscillator, and the 8-bit PWM supports edge-aligned operation for LED dimming, motor control, or simple SMPS loops. Typical applications include LED lighting drivers, fan/thermostat controllers, handheld toys, battery-powered sensor nodes, and auxiliary timer/logic replacement in larger systems. The SOT-23-6 form factor is critical for space-constrained wearables and inline cable modules. For reliable operation, ensure VDD decoupling with a 0.1 µF ceramic capacitor placed within 5 mm of pin 1, observe the 5.5 V absolute-maximum on VDD, and avoid driving pin 4 (GP3) above VDD since it is an open-drain input-only pin on this family. This page consolidates XAIPART distributor pricing, cross-brand drop-in alternatives, and practical design notes that supplement the manufacturer datasheet, helping procurement and design engineers verify fit, pin compatibility, and lifecycle status in a single view.

見積もり お問い合わせ
PIC10F320-E/MC - 8-bit MCU, 16MHz, 448B Flash, 8-DFN | Microchip
PIC10F320-E/MC

PIC10F320-E/MC - 8-bit MCU, 16MHz, 448B Flash, 8-DFN | Microchip

The Microchip Technology PIC10F320-E/MC is an 8-bit PIC microcontroller with 16 MHz CPU speed, 448 bytes of Flash program memory and 32 bytes of SRAM, housed in an 8-pin DFN (2 x 3 mm, 0.5 mm pitch) package with exposed pad. It integrates a 10-bit ADC, configurable logic cells, and an enhanced mid-range 14-bit instruction set core, making it a compact drop-in for cost-sensitive, space-constrained embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash or ROM), volatile data memory (RAM), and programmable peripherals (ADC, timers, communication interfaces, GPIO). PIC microcontrollers from Microchip use a modified Harvard RISC architecture with separate program and data buses, which allows single-cycle instruction fetch and deterministic timing - a hallmark of the PIC family. PIC microcontrollers sit in the hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The PIC10F sub-family is the smallest and lowest-pin-count member of the PIC lineup, optimized for the most space-constrained applications. Key specifications include a 16 MHz maximum oscillator frequency (corresponding to a 250 ns instruction cycle), 4 general-purpose I/O pins, a 10-bit Analog-to-Digital Converter with up to 4 input channels, and a wide operating voltage range from 2.3 V to 5.5 V. The device includes 1 Kbyte of Flash self-read/write program memory and supports in-circuit serial programming (ICSP) through dedicated PG and CG pins. Architecturally, the PIC10F320 uses a 14-bit instruction word width and includes hardware features such as a configurable logic cell (CLC), Master Synchronous Serial Port (MSSP) supporting SPI and I2C, and a Numerically Controlled Oscillator (NCO) for precision waveform generation. These integrated peripherals eliminate external logic and reduce BOM cost in applications like LED lighting control and consumer accessories. Typical applications include battery-powered IoT sensor nodes, low-cost remote controls, LED lighting controllers, simple motor control loops, and consumer appliances. The wide 2.3 V to 5.5 V supply range and ultra-low-power sleep mode make the PIC10F320 well suited for energy-harvesting and coin-cell powered designs. When designing with this device, ensure decoupling capacitors of at least 0.1 µF are placed close to the VDD pin. Programming via ICSP requires dedicated connections to ICSPCLK and ICSPDAT, which are multiplexed onto GPIO pins on this small package. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC10F family, and practical PCB layout guidance not found on the manufacturer product page alone.

見積もり お問い合わせ
PIC10F320-E/OT - 8-bit MCU, 448B Flash, SOT-23-6 | Microchip
PIC10F320-E/OT

PIC10F320-E/OT - 8-bit MCU, 448B Flash, SOT-23-6 | Microchip

The Microchip Technology PIC10F320-E/OT is an 8-bit PIC microcontroller based on the enhanced mid-range core, delivering 16 MIPS performance from a 16 MHz internal oscillator in a 6-pin SOT-23-6 surface-mount package. The device integrates 448 bytes of Flash program memory, 64 bytes of RAM, a 10-bit ADC with up to 4 channels, two 10-bit PWM modules, and a configurable logic cell (CLC) for hardware peripheral customization. It operates across a wide 2.3V to 5.5V supply range with ultra-low power consumption suitable for battery-powered and energy-harvesting designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals optimized for control-oriented tasks. PIC microcontrollers use a modified Harvard architecture with separate program and data buses, enabling single-cycle instruction execution. Within the microcontroller family hierarchy, the PIC10F320 sits at the smallest-footprint tier (6-pin), positioning it above discrete logic for simple timing and sensing tasks but below 8/14/20-pin PIC devices in I/O count. The 10F family is specifically designed to replace simple analog or discrete logic circuits with programmable intelligence in cost- and space-constrained designs. Key features include software-selectable oscillator frequency from 16 MHz down to 31 kHz, factory-calibrated to within 1% typical accuracy, plus an 8-level deep hardware stack and interrupt-on-change capability. The device supports in-circuit serial programming (ICSP) and self-read/write access to program memory, enabling field updates and bootloader-style workflows. The integrated CLC, NCO (numerically controlled oscillator), and complementary waveform generator (CWG) peripherals provide flexible signal generation without external components. The PIC10F320-E/OT's high-current I/O pins can directly sink/source up to 25 mA per pin for LED driving, eliminating the need for external transistor drivers. The SOT-23-6 footprint occupies approximately 8 mm² of PCB area, enabling miniaturized designs. Pinout compatibility with other 6-pin PIC10FXXX microcontrollers allows straightforward migration across the family. Typical applications include wearable fitness bands, IoT sensor nodes, battery-powered toys, LED decorative lighting, and simple user interfaces. The wide operating voltage range supports 2x AA / AAA battery packs and coin-cell operation with proper energy management. When designing with this device, allocate sufficient decoupling (100 nF ceramic close to VDD) and verify unused-pin configuration per datasheet recommendations to minimize current draw. The 'E' temperature grade supports -40°C to +125°C operation; choose 'I' grade (-40°C to +85°C) only when industrial temperature range suffices. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

見積もり お問い合わせ
PIC10F320-E/P - 8-bit MCU, 448B Flash, 4 I/O, DIP-8 | Microchip
PIC10F320-E/P

PIC10F320-E/P - 8-bit MCU, 448B Flash, 4 I/O, DIP-8 | Microchip

The Microchip Technology PIC10F320-E/P is a high-performance 8-bit Flash microcontroller from the PIC10F family, delivering 16 MIPS performance at 16 MHz in a compact 8-pin PDIP through-hole package. It integrates 448 bytes of Flash program memory (256 x 14 words), 64 bytes of RAM, and 4 digital I/O pins, all powered from a 2.3V to 5.5V supply rail. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, PWM generators, and communication interfaces. Within the broader IC hierarchy, the PIC10F320 sits in the 8-bit MCU segment -> microcontroller -> embedded processor -> semiconductor. The PIC10F320 belongs to Microchip's enhanced mid-range core family, which adds a hardware multiplier, larger instruction set, and improved interrupt handling versus the baseline mid-range core. Key differentiating features of the PIC10F320 include an integrated 8-bit ADC with internal voltage reference, Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG), and PWM peripheral. These features enable the PIC10F320 to drive LED lighting, generate precision waveforms, and implement custom logic gates - functions that previously required multiple discrete ICs. The on-chip 16 MHz internal oscillator eliminates the need for an external crystal in most designs. The architecture uses a Harvard-style RISC core with a 14-bit instruction word. Each instruction executes in one instruction cycle except for program branches (two cycles), giving deterministic timing suitable for real-time control. Peripherals connect via an 8-bit data bus, and the device supports in-circuit serial programming (ICSP) for field-upgradeable firmware. Typical applications include low-cost consumer appliances, LED lighting controllers, toy electronics, battery-powered IoT sensor nodes, and simple motor control. The wide 2.3V-5.5V supply range allows direct operation from a single lithium coin cell or two alkaline cells. When designing with the PIC10F320, plan I/O carefully because only 4 pins are user-accessible (one shared with MCLR/VPP). The device uses the ICD debugger header; ensure your PCB layout reserves the ICSP footprint. Programming voltage is applied on the MCLR pin during Flash write/erase.

見積もり お問い合わせ
PIC10F320-I/MC - 8-bit MCU, 16MHz, 448B Flash, 8-DFN | Microchip
PIC10F320-I/MC

PIC10F320-I/MC - 8-bit MCU, 16MHz, 448B Flash, 8-DFN | Microchip

The Microchip Technology PIC10F320-I/MC is an 8-bit PIC microcontroller based on the enhanced mid-range core, operating at up to 16MHz with 448 bytes of Flash program memory (256 x 14 words), 64 bytes of RAM, and 32 bytes of data EEPROM in a compact 8-pin DFN (2x3 mm) package. It features 4 GPIO pins (one input-only), a 10-bit ADC with up to 4 channels, a configurable 16-bit PWM, and a comparator, making it one of the most feature-dense 6/8-pin microcontrollers in the PIC10F family. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and integrated peripherals such as timers, ADC, and communication interfaces. The PIC10F320 belongs to the 8-bit PIC10F family, which sits below 16-bit PIC24 and dsPIC devices and above simple logic ICs in the embedded hierarchy. Within the PIC10F family, the PIC10F32x sub-family represents the next generation of enhanced mid-range 8-bit cores with integrated analog peripherals, addressing space-constrained designs that need more than a simple timer but cannot afford a larger package. Key differentiating features include the enhanced mid-range 16-bit instruction set with 49 instructions, 16 MHz internal oscillator accuracy of +/- 2 percent over the full -40C to +85C industrial range, an on-chip 8 MHz high-speed oscillator with 4x PLL option, and a single-pin ICSP debug interface. The 10-bit ADC delivers up to 25 ksps with hardware acquisition timer, while the PWM module supports edge- or center-aligned operation with independent period and duty cycle. The integrated comparator has programmable reference and can wake the device from sleep, enabling ultra-low-power battery monitoring applications. Typical applications include LED lighting control, fan speed control, simple sensor interfaces, battery chargers, and consumer appliance primary controllers. The combination of internal oscillator, internal voltage reference, and 4 I/O pins allows a complete controller design with no external components beyond a decoupling capacitor and optional pull-up. Designers migrating from PIC10F200/PIC10F202 gain an integrated ADC, PWM, and EEPROM, eliminating the need for an external analog front-end in cost-sensitive designs. Designers should note that the -I suffix indicates the -40C to +85C industrial temperature range and the /MC suffix designates the 8-pin DFN (2x3 mm) package, which has no leads on the edges and requires careful PCB land pattern design for reliable reflow soldering. Programming is supported via the ICSP interface using Microchip MPLAB X IDE and PICkit programmers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The datasheet confirms 448B Flash, 16 MHz core, and 8-DFN packaging; verify final parameter ranges against Microchip's official datasheet.

見積もり お問い合わせ