マイクロコントローラ

製品 (20,000+)

PIC16F1779-E/PT - 8-Bit 32MHz 28KB Flash MCU 44-TQFP | Microchip
PIC16F1779-E-PT

PIC16F1779-E/PT - 8-Bit 32MHz 28KB Flash MCU 44-TQFP | Microchip

The Microchip PIC16F1779-E/PT is an 8-bit PIC microcontroller with 32MHz CPU, 28KB (16K x 14) Flash program memory, and a 44-pin TQFP (10x10) package. The device integrates an XLP (eXtreme Low-Power) core with 2KB RAM, multiple 10-bit ADC channels, and high-resolution PWM peripherals. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus, combining a CPU, RAM, Flash program memory, and configurable peripherals. PIC microcontrollers sit in the broader hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16F1779 belongs to Microchip's enhanced mid-range core family optimized for low-power, mixed-signal embedded designs. Key features include 32MHz CPU speed with 8 MIPS throughput, 28KB self-programmable Flash memory, 2KB SRAM, hardware peripherals such as 10-bit ADC, comparators, op-amps, and configurable logic cells. The XLP architecture provides sleep currents in the nanoamp range for battery-powered applications. Wide operating voltage range from 2.3V to 5.5V supports both 3.3V and 5V designs. Typical applications include LED lighting control with high-resolution PWM, switched-mode power supply (SMPS) digital control, battery chargers, motor control with FOC algorithms, and general-purpose embedded control requiring rich analog peripherals. The integrated op-amps and comparators eliminate external analog components in many signal-chain designs. When designing with this device, allocate sufficient program memory for bootloader and application code; the 28KB Flash accommodates up to 16K instruction words. For ultra-low-power designs, leverage the nanoWatt XLP sleep modes and use ICD debugging headers for production test access.

見積もり お問い合わせ
PIC16F1779-E/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip
PIC16F1779-E/PT

PIC16F1779-E/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F1779-E/PT is an 8-bit PIC XLP microcontroller featuring 32MHz CPU speed, 28KB (16K x 14) Flash program memory, 2KB RAM, and a 10-bit ADC, housed in a 44-pin TQFP (10x10mm) package. The "E" suffix denotes the extended operating temperature range (-40C to +125C), and the "/PT" suffix specifies the TQFP package with industrial-grade qualification. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/RAM/EEPROM), and programmable peripherals on a single silicon die. The PIC16F1779 belongs to the PIC16F177x sub-family, which integrates "Intelligent Analog" peripherals such as operational amplifiers, comparators, zero-cross detectors (ZCD), programmable ramp generators (PRG), and high-resolution PWM (HRPWM). These features target lighting, power supplies, battery charging, motor control, and general-purpose applications. Key features of the PIC16F1779 include 28KB Flash, 2KB RAM, 10-bit ADC with computation, multiple communication interfaces (I2C, LINbus, SPI, UART/USART), and Microchip's eXtreme Low Power (XLP) technology for battery-powered designs. The 44-TQFP package provides 36 programmable I/O pins with multiple peripheral pin-select (PPS) options for flexible PCB routing. Architecturally, the device uses an 8-bit RISC-based PIC core with a 14-bit instruction word, enabling deterministic execution and efficient C-compiled code. Internal peripherals include hardware PWMs, op-amps, comparators, DACs, and a Complementary Output Generator (COG) useful for advanced motor drive and LED lighting topologies. Typical uses include LED lighting drivers with dimming and color-mixing, switched-mode power supply (SMPS) digital controllers, battery chargers with constant-current/voltage regulation, BLDC and stepper motor control, and general-purpose embedded control where integrated analog reduces BOM. Design tip: For wide VIN designs, place a 100nF decoupling capacitor close to each VDD pin and use a 10uF bulk capacitor on the supply rail. The PPS (Peripheral Pin Select) feature allows remapping of digital peripherals to different I/O pins, but analog peripherals remain pin-fixed per the datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right MCU variant for their application.

見積もり お問い合わせ
PIC16F1779-I/ML - 28KB Flash, 8-bit MCU, 44-QFN | Microchip
PIC16F1779-I/ML

PIC16F1779-I/ML - 28KB Flash, 8-bit MCU, 44-QFN | Microchip

The Microchip PIC16F1779-I/ML is an 8-bit PIC® XLP™ flash microcontroller featuring 28KB (16K x 14 words) of program flash, 2KB RAM, and a 32 MHz internal oscillator, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. It belongs to the PIC16(L)F177x family, which integrates a high level of Intelligent Analog and digital peripherals targeted at lighting, power conversion, battery charging, and motor control designs. According to the Microchip product page, the part is part of the extended XLP family with nanoWatt XLP technology for ultra-low-power operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripheral blocks onto one silicon die. The PIC16F177x family belongs to the 8-bit PIC mid-range architecture, which sits in a taxonomy of: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio, mid-range PIC MCUs are widely used in cost-sensitive embedded designs where deterministic interrupt response and long product lifecycle support matter more than raw compute throughput. Key features of the PIC16F1779 include 28KB flash with self-programmability, 2KB SRAM, 256 bytes of EEPROM, up to 36 I/O pins rated to 100 mA source/sink per pin, peripheral pin select (PPS) for flexible signal routing, four op-amps, 10-bit and 16-bit PWMs, 10-bit DACs, high-speed comparators, zero-cross detect (ZCD), complementary waveform generator (COG), programmable ramp generator (PRG), and SPI/I2C/UART communication. According to the Mouser listing, the device is described as having HEF, HS Comp, 10b DAC, OpAmp, COG, ZCD, PRG, 100 mA I/Os, PPS, 10/16b PWMs, and SPI. Technically, the PIC16F1779 uses a 14-bit instruction word with a RISC-style pipeline and 32 MHz operation (8 MHz internal oscillator with 4x PLL), supporting 2.5V/3.3V/5V supply ranges. The integrated op-amps, comparators, and DACs form a complete analog front-end, while the COG and PRG blocks support advanced power-supply topologies such as bridgeless PFC, LLC, and synchronous rectification. The ZCD enables AC line zero-crossing detection without external circuitry. Typical applications include LED lighting drivers (constant-current and color-mixing), switch-mode power supplies, battery chargers, brushless DC (BLDC) and PMSM motor controllers, and general-purpose industrial/IoT endpoints. The exposed thermal pad on the 44-QFN package helps dissipate heat when the device is driving high-current outputs. When designing with this part, allocate the four op-amp blocks carefully because they share analog resources with the comparators and DAC. Use the PPS feature to remap peripheral I/O onto convenient package pins, reducing PCB layout rework. Order the correct temperature grade (I = -40C to +85C industrial) for your end environment. This page synthesizes distributor pricing, same-brand drop-in alternatives in the same 44-QFN package, and practical design notes that go beyond the manufacturer datasheet summary.

見積もり お問い合わせ
PIC16F1779-I/P - 8-Bit 32MHz 28KB Flash MCU 40-PDIP | Microchip
PIC16F1779-I/P

PIC16F1779-I/P - 8-Bit 32MHz 28KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC16F1779-I/P is an 8-bit RISC PIC microcontroller with 32MHz operation, 28KB (16K x 14) of Flash program memory, 2KB RAM, and a 40-pin PDIP through-hole package. It belongs to the PIC16F177x family and integrates CIPs (Core Independent Peripherals) such as 10-bit ADC, 10-bit DAC, operational amplifiers, comparators, zero-cross detectors, programmable ramp generators, 16-bit PWMs, and configurable logic cells for high analog and digital integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals into one IC. The PIC16F1779-I/P uses the PIC16 8-bit RISC CPU with hardware multiplier and executes most instructions in one instruction cycle, making it well-suited for deterministic real-time control. The "F" suffix indicates Flash program memory, supporting in-system self-programming. Within the broader taxonomy, the PIC16F1779-I/P sits between microcontroller and embedded microcontroller, part of Microchip's PIC16 mid-range family. The -I/ suffix denotes industrial temperature grade (-40C to +85C). Key features include 10-bit ADC with up to 28 channels, two 10-bit DACs, four op-amps, three comparators, two programmable ramp generators, four 16-bit PWMs with independent time bases, and Peripheral Pin Select (PPS) for flexible I/O routing. The device supports SPI, I2C, and EUSART communication, plus a 32MHz internal oscillator. XLP (eXtreme Low Power) technology provides sleep currents down to the nanoampere range. The architecture uses a Harvard bus with separate instruction and data paths, allowing simultaneous fetch and execution. The integrated CIPs enable analog signal conditioning, closed-loop feedback, and motor commutation without CPU intervention, freeing the core for system-level tasks. PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB routing in mixed-signal designs. Typical applications include LED lighting drivers, switch-mode power supply (SMPS) digital control, battery chargers, BLDC and stepper motor control, and general-purpose mixed-signal embedded systems. The 40-pin PDIP package is popular for prototyping and through-hole assembly in industrial and educational designs. When designing with this part, verify the I/O count required for your application and ensure PPS is configured for your peripheral-to-pin mapping. Use a 10k pull-up on MCLR for proper reset behavior, and decouple VDD with 100nF ceramic capacitors placed close to each supply pin. Consider migrating to PIC16F1779-I/PT for surface-mount assembly in production. This page combines Microchip datasheet data with distributor pricing, drop-in alternative listings, and engineering design notes not found in any single datasheet or distributor page.

見積もり お問い合わせ
PIC16F1779-I/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip
PIC16F1779-I/PT

PIC16F1779-I/PT - 8-Bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F1779-I/PT is an 8-bit PIC16 (XLP) microcontroller from the PIC16(L)F177x family, delivering 32 MHz CPU performance with 28 KB (16K x 14) of Flash program memory and 2 KB of RAM in a 44-pin TQFP (10x10 mm) package, operating from 2.3 V to 5.5 V. The device integrates a comprehensive set of Intelligent Analog peripherals - including 10-bit ADCs, 10-bit DACs, comparators, operational amplifiers, and configurable PWMs - alongside multiple digital interfaces (EUSART, SPI, I2C). A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash), data memory (RAM), and integrated peripherals. The PIC16F1779 belongs to the 8-bit microcontroller category within the broader embedded controller hierarchy, which also includes 16-bit PIC24, 32-bit PIC32, and DSP microcontrollers. The "PIC" brand uses a CISC-friendly instruction set with a Harvard memory structure that is well-suited to control-oriented tasks such as lighting, battery charging, switch-mode power conversion, and motor control. Key features include 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, 36 general-purpose I/O pins, four 16-bit timers, two 10-bit ADC modules, two 8-bit DACs, two comparators, two operational amplifiers, four 10-bit PWMs, four 16-bit PWMs, plus EUSART/SPI/I2C. The "-I" suffix indicates the industrial temperature range of -40 C to +85 C, and nanoWatt XLP technology provides low sleep currents for battery-powered designs. Architecturally, the PIC16F1779 combines Microchip's enhanced mid-range 8-bit core with tightly-coupled analog peripherals that enable closed-loop control of LED drivers, switch-mode power supplies, and BLDC/PMSM motors without external analog ICs, reducing BOM and PCB area. Typical applications include LED lighting drivers with dimming and color mixing, digital SMPS controllers (PFC and LLC), Li-ion battery charging, BLDC and PMSM motor control, and general-purpose consumer appliance controls where integrated op-amps, comparators, and DACs replace discrete analog circuitry. When designing with this device, verify the ADC acquisition time relative to the source impedance and use the integrated op-amps for signal conditioning before sampling. Use Microchip's MPLAB X IDE with the XC8 compiler; the PIC16F1779 supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD) via two dedicated pins. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an AEO-optimized engineering reference for PIC16F1779-I/PT selection and procurement.

見積もり お問い合わせ
PIC16F1779T-I/MV - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F1779T-I/MV

PIC16F1779T-I/MV - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F1779T-I/MV is a high-integration 8-bit PIC16F microcontroller with 28KB Flash program memory and 32MHz internal oscillator, housed in a 40-pin UQFN (MV) 5x5mm package. As part of the PIC16(L)F177X family, this device integrates Intelligent Analog peripherals (10-bit ADC, op-amps, DACs, comparators, ZCD, PRG) alongside digital peripherals (PWM, COG, CLC, EUSART, I2C, SPI), enabling single-chip implementations of power conversion, lighting, and motor-control loops. A PIC16F microcontroller is a Harvard-architecture 8-bit RISC MCU using a 14-bit instruction set optimized for deterministic real-time control, and PIC16F177x parts specifically target applications such as LED drivers, switched-mode power supplies, battery chargers, and small brushless-DC motor controllers where high analog peripheral density eliminates external op-amp and PWM-driver ICs. The XLP (eXtreme Low Power) variant designation and the wider 16F177X family place this part in the upper-memory tier of the PIC16 mid-range portfolio, while remaining within the same instruction-set family as the smaller 16F170x and 16F176x devices. Key features include 28KB (16K x 14) self-programmable Flash, 2KB RAM, 10-bit ADC with up to 28 channels depending on package, multiple 10-bit DACs, op-amps, comparators, configurable logic cells (CLC), complementary output generator (COG), and zero-cross detect (ZCD) for AC-line control. The integrated high-resolution PWM and PWM-steered dead-band control supports digital power topologies. The "T" suffix denotes Tape & Reel packaging and "I" indicates the -40C to +85C industrial temperature range. The PIC16F1779 architecture pairs the standard PIC16 mid-range CPU with peripheral pin select (PPS), giving the matrix access to nearly any digital peripheral on most pins, which dramatically simplifies PCB layout for complex mixed-signal designs. The 5V-tolerant I/O and 1.8V-5.5V VDD range (for LF variants) or 2.3V-5.5V VDD range (for F variants) cover both lithium-battery and 5V regulated-rail systems. Typical applications include LED lighting drivers, digital switch-mode power supplies, lithium-ion battery chargers, ceiling-fan and small BLDC motor control, electronic ballasts, and general-purpose mixed-signal embedded platforms. The compact UQFN-40 5x5mm footprint also makes it suitable for space-constrained designs such as smart-home sensor hubs and consumer white goods. When designing with this part, note that the UQFN package has an exposed thermal pad that must be soldered to the board ground plane for both thermal dissipation and electrical grounding; missing the e-pad solder connection can cause erratic ADC readings and reduced thermal performance. Program development is supported by MPLAB X IDE with the XC8 compiler and the MPLAB Code Configurator (MCC) plug-in. This page synthesizes distributor pricing, drop-in alternatives sharing the same UQFN-40 footprint, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1779T-I/PT - 8-bit MCU, 28KB Flash, 32MHz, 44-TQFP | Microchip
PIC16F1779T-I/PT

PIC16F1779T-I/PT - 8-bit MCU, 28KB Flash, 32MHz, 44-TQFP | Microchip

The Microchip Technology PIC16F1779T-I/PT is an 8-bit PIC microcontroller from the PIC16F177X series featuring 28KB (16K x 14) of Flash program memory, 2KB of RAM, and a 44-pin TQFP (10x10 mm) package, operating at up to 32MHz across a 2.3V to 5.5V supply range. The "T" suffix denotes tape-and-reel packaging while "I" indicates the industrial temperature grade (-40C to +85C), and "PT" identifies the TQFP-44 footprint. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a mix of digital and analog peripherals. The PIC16F1779 belongs to Microchip's PIC16F177X family, positioned between the simpler PIC16F15xx series and the more capable PIC16F18xx line. These MCUs are commonly used in cost-sensitive embedded designs where on-chip analog integration reduces external component count and PCB area. Key features of this MCU include a high level of analog integration with operational amplifiers, comparators, 10-bit ADC and DAC modules, zero-crossing detection (ZCD), programmable ramp generator (PRG), 10/16-bit PWM peripherals, and Peripheral Pin Select (PPS) for flexible signal routing. The device offers 36 digital I/O pins with 100mA high-current capability and supports EUSART, SPI, and I2C communication interfaces. The XLP 1 (eXtreme Low Power) technology enables nanoWatt sleep currents, making the part suitable for battery-powered applications. The architecture uses a modified Harvard RISC core with a 14-bit wide instruction word and a 32MHz internal oscillator, supported by an instruction set optimized for C-compiled and assembly code. On-chip debugging is provided through ICD (In-Circuit Debugger) with dedicated pins, and programming is supported via the standard ICSP (In-Circuit Serial Programming) interface. Typical applications include LED lighting controllers, switch-mode power supply (SMPS) digital control loops, battery charging management, BLDC and brushed-DC motor drives, and general-purpose embedded control in white goods and small appliances. The integrated op-amps and comparators allow closed-loop current and voltage sensing without external amplifiers. When designing with this part, ensure the VDD/VSS pins have 100nF decoupling placed within 5mm of each supply pin, and follow Microchip's datasheet recommendations for the analog supply (AVDD/AVSS) layout. The PPS feature requires careful pin-function mapping at firmware startup; otherwise, peripherals will not drive their assigned I/Os. Industrial temperature grade (-40C to +85C) is sufficient for most indoor and outdoor non-automotive deployments. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing, replacement, and application guidance.

見積もり お問い合わせ
PIC16F1782-E/ML - 8-bit MCU 3.5KB Flash 28-QFN | Microchip
PIC16F1782-E/ML

PIC16F1782-E/ML - 8-bit MCU 3.5KB Flash 28-QFN | Microchip

The Microchip PIC16F1782-E/ML is an 8-bit enhanced mid-range PIC16 family microcontroller with 3.5KB Flash program memory, 256 bytes RAM, and 256 bytes EEPROM, housed in a 28-pin QFN package (3x3 mm, 0.90 mm height) with 12 I/O ports. It integrates a 12-bit ADC, an 8-bit DAC, an operational amplifier (OPAMP), a fast comparator (FastComp), configurable logic cells, and supports PSMC (Peripheral Pin Select / Signal Measurement Timer / PWM) plus Capture/Compare/PWM (CCP), I2C, SPI, and EUSART peripherals. An 8-bit PIC microcontroller is a RISC-based, flash-programmable CMOS device from Microchip's PIC16 family that executes most instructions in a single 200 ns cycle. PIC MCUs sit within the broader hierarchy of microcontrollers, which themselves belong to embedded processors and finally to the semiconductor IC category. Enhanced mid-range PIC16 parts such as the PIC16F1782 add peripherals such as 12-bit ADCs, op-amps, and configurable logic that are absent from baseline PIC10/12/16F parts. Key features include a 20 MHz clock speed (50 ns instruction cycle), 2.5V to 5.5V supply voltage, low-power XLP (eXtreme Low Power) technology, and an extended operating temperature range of -40C to +125C (the -E suffix indicates the industrial/automotive temperature grade). The integrated op-amp and fast comparator enable analog signal conditioning directly on-chip, while PSMC supports advanced timer/PWM/Signal Measurement control with high-resolution edge placement. The PIC16F1782 uses Microchip's enhanced mid-range core with 49 instructions and a 14-bit instruction word, providing predictable interrupt response and deterministic timing suitable for real-time embedded designs. The 28-QFN package is well suited to compact layouts, and the device is supported by MPLAB X IDE, XC8 compilers, and the PICkit/SNAP debugger family. Typical applications include LED lighting and dimming control, sensor signal conditioning with on-chip op-amp, low-power battery-powered IoT nodes, small motor and fan control using PSMC, automotive interior modules, and industrial control loops where the integrated 12-bit ADC and 8-bit DAC minimize external component count. When designing with this part, reserve adequate decoupling (100 nF + bulk) near VDD, route the analog AVSS/AVDD pair separately, and avoid sharing the OPAMP output pin with digital traffic. XLP sleep currents in the nanoampere range make this part particularly suitable for always-on, battery-powered sensor nodes. This page synthesizes verified distributor pricing, structured drop-in alternatives drawn from the same QFN package family, and practical design notes that extend beyond the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1782-E/SO - 8-bit MCU 3.5KB Flash 28-SOIC | Microchip
PIC16F1782-E/SO

PIC16F1782-E/SO - 8-bit MCU 3.5KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F1782-E/SO is an 8-bit enhanced mid-range PIC16F microcontroller IC delivering 32 MHz CPU performance from a 3.5 KB (2K x 14) Flash program memory, 256 B SRAM and 256 B EEPROM, housed in a 28-pin SOIC (7.50 mm width) package. The -E suffix denotes the extended industrial temperature grade of -40C to +125C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripheral IP blocks (ADC, timers, communication controllers). The PIC16F1782 belongs to the eXtreme Low Power (XLP) family of Microchip 8-bit microcontrollers, which adds aggressive nanoWatt sleep modes, intelligent peripheral management and a wide operating voltage range to the well-known PIC RISC architecture. This product type sits in the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include an integrated 12-bit ADC with up to 11 channels, an 8-bit DAC, operational amplifiers (Op Amps), fast comparators, a Programmable Switch Mode Controller (PSMC), two CCP modules, and EUSART plus I2C/SPI serial interfaces. The device operates from 1.8V to 5.5V and supports nanoWatt XLP technology for battery-powered designs. Architecturally the PIC16F1782 uses Microchip's enhanced mid-range core with 200 ns instruction execution and a 14-bit instruction word, providing up to 16 MIPS while keeping the popular PIC toolchain (MPLAB X IDE, XC8 compiler, PICkit programmers) fully compatible. Typical applications include LED lighting control with PSMC-driven dimming, SMPS and power conversion loops, sensor signal conditioning with on-chip op amps, battery charging controllers, and small consumer or industrial appliances requiring low-power 8-bit control. When designing with this part, choose decoupling carefully (100 nF + bulk) and review errata documents for revision-specific ADC and PSMC behavior before committing to high-volume production. This page synthesizes distributor pricing, drop-in 28-SOIC alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1782-I/ML - 8-Bit MCU, 32MHz, 3.5KB Flash, 28-QFN | Microchip
PIC16F1782-I/ML

PIC16F1782-I/ML - 8-Bit MCU, 32MHz, 3.5KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F1782-I/ML is an 8-bit PIC® XLP™ enhanced mid-range microcontroller featuring 3.5KB (2K x 14) of Flash program storage, 256 bytes of SRAM, and 256 bytes of EEPROM, running at up to 32MHz instruction clock in a 28-pin QFN (6x6 mm) package. The integrated advanced analog peripherals include a 12-bit ADC, 8-bit DAC, operational amplifiers (OPAs), a fast comparator, and three 16-bit Pulse-Width Modulation (PWM) peripherals plus a dedicated Peripheral Signal Steering and Modulation Controller (PSMC), enabling high-resolution motor control, lighting, and power-conversion loops. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripherals on one die. The PIC® XLP™ (eXtreme Low Power) family extends this definition by adding proprietary nanoWatt XLP technology that drops active current to the microampere range and standby current to the nanoampere range, allowing battery-powered designs such as wireless sensor nodes, wearables, and remote controls to operate for years on a single cell. The PIC16F1782 also implements the enhanced mid-range core, providing 49 instructions, hardware multiply, and a 14-bit instruction word with 200 ns execution. Key features include 28 general-purpose I/O pins arranged for capacitive-touch proximity sensing via the mTouch™ peripheral, two UART/USART modules (one EUSART with auto-baud), I²C/SPI master/slave interfaces, three 16-bit Capture/Compare/PWM, a 12-bit differential ADC with up to 11 channels, two 8-bit DACs, two on-chip op-amps, and a 5-bit DAC reference. Operating voltage spans 2.3V to 5.5V, supporting both 3.3V and 5V rails, and the QFN-28 package offers a small 6x6 mm footprint suited to high-density consumer and industrial control designs. Typical applications include LED lighting color mixing and dimming, brushless DC motor and stepper control loops, battery-powered sensor hubs with capacitive-touch keypads, smart thermostats, IoT edge nodes, and precision analog front-ends. The PSMC block generates complementary PWM with dead-band, programmable slope compensation, and current-reset schemes that would otherwise require a dedicated motor-control DSP, simplifying field-oriented control and synchronous-buck LED drivers. When designing with this part, place a 0.1 µF decoupling capacitor within 5 mm of the VDD pin and route the exposed pad (EP) to a continuous ground plane for thermal and noise performance. Configure the device for low-power operation using the ON bit, FCPU clock-switching, and the ultra-low-power wake-up peripheral to minimize sleep current in battery applications.

見積もり お問い合わせ
PIC16F1782-I/MV - 8-bit XLP MCU, 32MHz, 3.5KB Flash | Microchip
PIC16F1782-I/MV

PIC16F1782-I/MV - 8-bit XLP MCU, 32MHz, 3.5KB Flash | Microchip

The Microchip Technology PIC16F1782-I/MV is an 8-bit enhanced mid-range PIC16F microcontroller built on the nanoWatt eXtreme Low Power (XLP) technology platform, delivering up to 32 MHz CPU performance from a 3.5 KB Flash program memory in a 28-pin UQFN (4x4 mm) package. It integrates 256 bytes of SRAM, 256 bytes of EEPROM, and an unusually rich analog subsystem for an 8-bit MCU: a 12-bit ADC with up to 11 channels, an 8-bit DAC, two operational amplifiers (op amps), a programmable switch-mode controller (PSMC), and a fast comparator. These analog peripherals allow a single chip to replace typical external signal-chain components in sensor-conditioning designs. The device operates from 2.5 V to 5.5 V across the industrial -40 °C to +85 °C temperature range, targeting battery-powered and portable embedded systems. An 8-bit PIC microcontroller is a RISC-based CMOS processor that executes a fixed instruction set in a single cycle (200 ns at 20 MHz instruction clock). Within the broader taxonomy, PIC16F microcontrollers sit between PIC10/12/16 baseline parts and dsPIC33 digital-signal controllers; they are the workhorse general-purpose family for cost-sensitive embedded designs requiring moderate analog performance and ultra-low standby power. The XLP nanoWatt technology tier further positions PIC16F178x parts below PIC24/dsPIC families in power consumption, making them suited to sleep-current-critical applications like wireless sensor nodes and wearable health devices. Key features include the 12-bit ADC with acquisition-and-conversion support, dual 32 MHz op amps configurable for general-purpose or cascade modes, the PSMC peripheral for direct MOSFET gate drive in DC-DC or lighting control loops, an 8-bit DAC for reference or bias generation, and the standard PIC16F peripheral mix of Enhanced Universal Synchronous/Asynchronous Receiver Transmitter (EUSART), MSSP for SPI/I2C, and up to 25 I/O pins. The integrated Core Independent Peripherals (CIPs) - PSMC, op amps, DAC, and comparator - can operate without CPU intervention, lowering active duty cycle and extending battery life. Architecturally the PIC16F1782 uses a Harvard RISC core with a 14-bit instruction word and 8-bit data path, supported by a hardware stack and interrupt controller with hardware context save. The 32 MHz internal oscillator (±1% accuracy after calibration, FOSC = HFINTOSC) eliminates external crystals in most designs, reducing BOM cost. Internal voltage-reference and fixed-voltage-reference modules supply the ADC, DAC, and comparator, enabling fully self-contained analog signal acquisition without external references. Typical applications include low-battery sensor interfaces, LED lighting control loops using PSMC for high-frequency dimming, smoke and gas detectors with on-chip op-amp signal conditioning, e-metering front-ends, and small-form-factor consumer devices that need precision analog alongside 8-bit logic. The combination of 32 MHz CPU, 3.5 KB Flash, and 12-bit ADC in a 4x4 mm UQFN also fits wearable health patches and IoT edge nodes. When designing with this MCU, consider the UQFN-28 thermal path - the exposed pad must be soldered to a sufficient copper pour for heat extraction during heavy ADC sampling. Decouple VDD with 100 nF and bulk 1-10 µF ceramic capacitors placed within 3 mm of the supply pins. The PSMC peripheral requires firmware configuration before first use and benefits from a dedicated gate-drive trace layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimized for engineers evaluating the PIC16F1782-I/MV for low-power mixed-signal designs.

見積もり お問い合わせ
PIC16F1782-I/SO - 8-Bit 32MHz MCU 3.5KB Flash 28-SOIC | Microchip
PIC16F1782-I/SO

PIC16F1782-I/SO - 8-Bit 32MHz MCU 3.5KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F1782-I/SO is an 8-bit PIC16 microcontroller in the enhanced mid-range XLP family, delivering 32 MHz CPU performance, 3.5 KB (2K x 14) of Flash program memory, 256 bytes of EEPROM, and 256 bytes of SRAM in a 28-pin SOIC (SO) package with industrial -40C to +85C temperature rating. Key features include a built-in 12-bit ADC, an 8-bit DAC, two op-amps, three 5-bit DACs, three timers, enhanced PWM, mTouch capacitive sensing, and the eXtreme Low Power (XLP) sleep modes that draw microampere-level quiescent current. Supply voltage spans 2.3 V to 5.5 V, with operating current typically below 2 mA at full speed. Typical applications include low-power sensor signal conditioning with on-chip op-amps, LED lighting with hardware PWM, consumer white goods with capacitive touch keypads, battery-powered IoT endpoints, and mixed-signal front-end boards that benefit from the integrated ADC plus DAC. Design considerations focus on decoupling, oscillator selection between internal 32 MHz HFINTOSC and external crystal, and in-circuit serial programming (ICSP) via PGC/PGD. Code development uses the MPLAB X IDE with the XC8 compiler and PICkit 5 programmer.

見積もり お問い合わせ
PIC16F1782-I/SS - 8-bit 32MHz MCU 3.5KB Flash 28-SSOP | Microchip
PIC16F1782-I/SS

PIC16F1782-I/SS - 8-bit 32MHz MCU 3.5KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16F1782-I/SS is an 8-bit enhanced mid-range PIC16 microcontroller running at up to 32 MHz, integrating 3.5 KB (2K x 14 words) of Flash program memory, 256 B of RAM, and 256 B of EEPROM in a 28-pin SSOP package. The part is part of the PIC16F178x family and supports 1.8-3.6V operation from the 'LF' variants and 2.5-5.5V on the standard 'F' parts, delivering 200 ns instruction execution through the PIC RISC architecture. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of peripherals such as analog-to-digital converters, digital-to-analog converters, timers, and communication interfaces. PIC microcontrollers from Microchip occupy the 8-bit MCU tier in the embedded semiconductor hierarchy, sitting below 32-bit ARM Cortex-M parts but above simple digital logic, and are widely used in cost- and power-sensitive applications. The PIC16F1782 specifically belongs to the enhanced mid-range family, gaining CIP (Core Independent Peripherals) such as the 12-bit ADC, 8-bit DAC, operational amplifier, fast comparator, and Programmable Switch Mode Controller (PSMC) that historically required external components. Key features of the PIC16F1782-I/SS include 12-bit resolution ADC with up to 11 channels, an 8-bit DAC, two op-amps, a high-speed comparator with 50 ns response, CCP, EUSART, I2C/SPI, and 25 mA source/sink per I/O with 100 mA total. The device supports internal oscillator accuracy to within +/-1% via the HFINTOSC, eliminating an external crystal in many designs. NanoWatt XLP technology provides sleep currents below 50 nA typical, making the part attractive for battery-powered sensor nodes and energy-harvesting applications. The 28-SSOP package exposes 24 GPIO lines, sufficient for most small-form-factor embedded products. Typical applications for the PIC16F1782 include LED lighting controllers with constant-current regulation through the PSMC, sensor signal conditioning using the on-chip op-amp, small DC motor control via the PSMC and CCP, smoke detectors and CO sensors, battery chargers, consumer appliances with graphical or segmented LCDs, and compact sensor hubs in industrial IoT nodes. The combination of analog integration and eXtreme Low Power (XLP) makes the part a frequent choice for low-power mixed-signal designs that previously required separate op-amps, comparators, and power controllers. When designing with this part, pay attention to the VDD range (2.5-5.5 V for F-grade, 1.8-3.6 V for LF-grade) and use the PPS (Peripheral Pin Select) feature to remap digital peripherals to free I/O pins. The PSMC must be configured for the target topology (buck, boost, flyback) using Microchip's code configurator. Decoupling should follow the datasheet typical-application section, with a 100 nF VDD pin cap and a bulk capacitor on the analog rail. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC16F1782T-I/ML - 8-Bit XLP MCU 32MHz 3.5KB Flash | Microchip
PIC16F1782T-I/ML

PIC16F1782T-I/ML - 8-Bit XLP MCU 32MHz 3.5KB Flash | Microchip

The Microchip Technology PIC16F1782T-I/ML is an 8-bit PIC microcontroller built on the eXtreme Low Power (XLP) platform, delivering up to 32 MHz CPU performance with 3.5 KB (2K x 14) of Flash program memory, housed in a 28-pin QFN (6x6 mm) industrial-temperature package. It integrates 256 bytes of RAM, 256 bytes of EEPROM, a 12-bit ADC, an 8-bit DAC, a programmable switch-mode controller (PSMC), an operational amplifier, fast comparators, CCP, and EUSART plus I2C/SPI serial interfaces. An 8-bit microcontroller (MCU) is a compact processor that combines a CPU, RAM, program memory, and a rich set of peripherals on a single silicon die. PIC microcontrollers sit in the broader taxonomy of microcontroller -> embedded processor -> semiconductor IC, and the XLP variants are specifically engineered for ultra-low-power battery-powered or energy-harvesting designs where quiescent current directly determines product runtime. Key differentiating features of the PIC16F1782 include the integrated op-amp that saves an external analog component, the PSMC that simplifies digital power-converter loops, the 12-bit differential ADC with computation, and the 8-bit DAC that is unusual at this price point. The 28-pin QFN footprint (6 x 6 mm) provides a compact land pattern while exposing up to 17 I/O pins, and the XLP architecture typically delivers nanoWatt sleep currents suitable for battery-backed IoT nodes. Technically, the device uses a 14-bit instruction word RISC core, runs from 2.5 V to 5.5 V supply, and supports in-circuit serial programming (ICSP) plus on-chip debug. The internal 32 MHz oscillator removes the need for an external crystal in many designs. The integrated peripherals map to flexible pin assignments via Peripheral Pin Select (PPS), which dramatically simplifies PCB routing when multiple serial interfaces are required. Typical applications include low-power IoT sensor nodes, battery-backed measurement instruments, LED lighting controllers that benefit from the on-chip PSMC and op-amp, white-goods and small-motor control using the CCP module, and portable consumer devices that take advantage of the small QFN package. The "-I/" temperature grade supports an industrial range of -40 C to +85 C. When designing with this part, remember that the QFN exposed pad must be soldered to the ground plane for thermal dissipation and electrical performance. Use the MPLAB X IDE and PICkit 5 programmer for development, and check the device errata document before committing to a final PCB revision. This page consolidates distributor pricing, drop-in same-package alternatives from Microchip's PIC16 family, and practical design notes that are not assembled in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1782T-I/SO - 8-bit MCU, 32MHz, 3.5KB Flash | Microchip
PIC16F1782T-I/SO

PIC16F1782T-I/SO - 8-bit MCU, 32MHz, 3.5KB Flash | Microchip

The Microchip Technology PIC16F1782T-I/SO is an 8-bit PIC16 enhanced mid-range microcontroller delivering 32 MHz CPU performance with 3.5 KB (2K x 14) Flash program memory in a 28-pin SOIC package. It integrates 256 B RAM, 256 B EEPROM, a 12-bit ADC, an 8-bit DAC, and the XLP (eXtreme Low Power) sleep architecture that has made the PIC16F178x series the standard choice for battery-and-power-sensitive embedded designs. An 8-bit PIC microcontroller is a RISC-architecture CMOS flash MCU that executes instructions in a single clock cycle (200 ns at 32 MHz). Within the broader hierarchy, it sits at: PIC microcontroller -> 8-bit MCU -> microcontroller (MCU) -> embedded IC -> semiconductor. Its 49-instruction instruction set is upward-compatible with the PIC10/12/16 baseline families, making code migration simple across the entire PIC16 portfolio. Key features include 12-channel 12-bit ADC with internal voltage reference, an integrated 8-bit DAC (5-/8-bit selectable on reference devices), 6 PWM modules with complementary outputs, a 32 MHz internal oscillator with +/-2% accuracy, and rich communication peripherals (I2C, SPI, AUSART). The wide 2.3V to 5.5V operating range and nanoWatt XLP sleep currents below 50 nA (typical) make it ideal for battery-powered industrial and consumer products that must survive years on a single coin cell. The device uses a 14-bit instruction word with a hardware multiplier for shift-based peripherals and an enhanced mid-range core that adds C-optimized addressing modes, hardware stack overflow/underflow reset, and a memory access partition. Programming and debug are handled through Microchip's MPLAB X IDE and ICD/PICKit toolchain, with the PICkit 5 providing fast production-grade in-circuit programming. Typical applications include battery-powered sensor nodes, LED lighting drivers, motor-control signal processors, automotive interior accessories, and small home-appliance user interfaces. The 12-bit ADC and 8-bit DAC combination is particularly valued in closed-loop control loops where digital sensing drives analog actuation. When designing with this part, place a 0.1 uF decoupling capacitor within 5 mm of the VDD pin and use bulk capacitance of at least 10 uF to stabilize the internal regulator. Ensure MCLR has a valid logic-high tie (>=VDD-0.2 V) at all times for proper device operation; floating MCLR can trigger unintended reset events. This page synthesizes distributor pricing, drop-in PIC16 alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
PIC16F1782T-I/SS - 8-Bit MCU, 3.5KB Flash, 12-bit ADC | Microchip
PIC16F1782T-I/SS

PIC16F1782T-I/SS - 8-Bit MCU, 3.5KB Flash, 12-bit ADC | Microchip

The Microchip PIC16F1782T-I/SS is a 28-pin 8-bit PIC® RISC flash microcontroller delivering 200 ns instruction execution and 32 MHz CPU performance from a 2.5 V to 5.5 V supply. It integrates 3.5 KB of self-programmable Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM, packaged in a 5.30 mm SSOP-28 with industrial -40°C to +85°C temperature rating. An 8-bit microcontroller (MCU) is a small, low-power computer-on-a-chip built around an 8-bit data path and a Harvard or von Neumann architecture; it executes a compact instruction set, contains CPU flash, EEPROM, RAM, and CPU/basic timers on-chip, and serves as the core of embedded systems ranging from sensor nodes to white goods. The PIC16F1782 belongs to the enhanced mid-range PIC16 family, sitting below 16-bit PIC24 and dsPIC devices in Microchip's portfolio and above legacy baseline PIC10/PIC12/PIC16 parts in compute and analog capability. XLP™ (eXtreme Low Power) technology and nanoWatt features place it under the broader power management IC umbrella in system-level power trees. Key features include 12-bit differential ADC with computation (ADC²), an 8-bit DAC, two op-amps, a 10-bit DAC reference, a 16-bit timer, and multiple communication peripherals: I²C, SPI, and EUSART with auto-baud detect. The device supports up to 12 I/O ports, internal oscillator calibration, and on-chip debug via ICSP™. The SSOP-28 form factor offers a small-PCB footprint while exposing nearly all peripheral pins. The PIC16F1782 uses a modified Harvard architecture with a 14-bit instruction word, allowing most instructions to complete in one instruction cycle. CPU flash memory supports self-programmability under firmware control, while the 256-byte data EEPROM supports 1M erase/write cycles typical. Analog integration (12-bit ADC, 8-bit DAC, two op-amps, programmable ramp generator) is implemented on-chip, reducing external component count versus discrete analog implementations. Typical applications include industrial sensor conditioning, LED lighting control with smooth dimming, battery chargers with closed-loop current/voltage regulation, motor control loops, and small appliances. The XLP nanoWatt modes also suit battery-powered sensor and metering designs. Design consideration: PIC microcontrollers require proper supply decoupling and a stable reset circuit; place a 100 nF decoupling capacitor close to VDD and follow Microchip's oscillator configuration guidelines to ensure reliable startup. The device is supported by MPLAB® X IDE and the XC8 compiler for development. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1783-E/MV - 8-bit MCU 32MHz 7KB Flash 28-UQFN | Microchip
PIC16F1783-E/MV

PIC16F1783-E/MV - 8-bit MCU 32MHz 7KB Flash 28-UQFN | Microchip

The Microchip Technology PIC16F1783-E/MV is an 8-bit PIC® XLP™ microcontroller IC running up to 32 MHz, integrating 7 KB (4K x 14) of Flash program memory in a compact 28-pin UQFN 4x4 mm package with exposed pad. The device targets low-power and mixed-signal embedded designs that require on-chip analog peripherals in a small footprint. An 8-bit microcontroller (MCU) is a microprocessor core with an 8-bit data bus, optimized for deterministic real-time control with low power consumption and a small instruction set. Microcontrollers sit at the lowest tier of the embedded-processor hierarchy, below DSP-32 and 32-bit Cortex-M class devices, and are widely used in sensor conditioning, human-interface, motor control and battery-powered nodes. The PIC16F1783 belongs to the enhanced mid-range PIC16F1 family that adds a CIP (Core Independent Peripheral) set including a 12-bit ADC, an 8-bit DAC, op-amps, comparators and PWM/Signal Measurement timers. Key features of the PIC16F1783-E/MV include 7 KB self-programmable Flash, 512 bytes of SRAM, 256 bytes of EEPROM, a 12-bit ADC with up to 14 channels, an 8-bit DAC, two operational amplifiers, two comparators, PWM modules, EUSART, I2C/SPI, and the eXtreme Low Power (XLP) sleep modes that drop quiescent current into the nanoamp range. The 28-UQFN (4x4 mm) exposed-pad package lowers thermal resistance and lets the part dissipate more power in compact PCB layouts. The architecture combines a Harvard RISC core with hardware multiplier, interrupt-driven peripheral set, and on-chip debug via ICD. The XLP technology plus nanoWatt XLP features yields typical sleep currents below 50 nA with RTC active, making the part attractive for battery-backed sensor nodes and energy-harvesting designs. Typical applications include IoT sensor nodes, low-power wireless transmitters (paired with sub-GHz or BLE modules), battery-powered instrumentation, LED lighting controllers, consumer appliances, and small motor/valve control loops where the on-chip op-amps and DAC close the analog loop without external parts. When designing with this part, allocate the bottom exposed pad to a contiguous ground copper pour; missing the EP connection reduces thermal performance and may cause EEPROM/ADC drift under load. Use MPLAB X IDE with the XC8 compiler and a PICkit 4 or MPLAB SNAP programmer to access the in-circuit debugger. This page synthesizes distributor pricing, drop-in pin-compatible alternatives drawn from Microchip's own family plus cross-brand equivalents, and practical design notes beyond what the datasheet alone supplies.

見積もり お問い合わせ
PIC16F1783-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip
PIC16F1783-E/SO

PIC16F1783-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F1783-E/SO is an 8-bit PIC® XLP™ 16F microcontroller featuring 7KB (4K x 14) of Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, all housed in a 28-pin SOIC (0.295", 7.50mm width) package. It operates at up to 32MHz, runs from 2.3V to 5.5V, and integrates a 12-bit ADC, an 8-bit DAC, multiple 16-bit PWMs, and the eXtreme Low Power (XLP) technology that sets it apart in battery-aware designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and a Harvard or von Neumann architecture. Within the broader taxonomy, MCUs sit under microcontrollers -> embedded controllers -> semiconductors. The PIC16F family specifically uses Microchip's enhanced mid-range core, which delivers deterministic interrupt latency, a single-cycle instruction at 32MHz (31.25ns per instruction), and CIPs (Core Independent Peripherals) such as the 16-bit PWM and the Configurable Logic Cell that operate without CPU intervention. The standout features include 7KB self-programmable Flash, 12-bit differential ADC with computation, an 8-bit 5-bit DAC pair, four 16-bit PWM channels, two comparators, a mTouch capacitive-touch sensing peripheral, and Microchip's XLP technology with typical 50nA sleep current and 1.8µA RTC-mode current. Peripherals connect through the Peripheral Pin Select (PPS) crossbar, which removes the fixed pin-per-peripheral constraint common to legacy 8-bit MCUs. Typical applications for PIC16F1783-E/SO include battery-powered sensor nodes, white-goods and small-appliance motor control (BLDC/PMSM FOC up to 48V with companion gate drivers), industrial control panels, LED lighting with dimmable PWMs, capacitive-touch user interfaces, and portable medical/wellness devices that benefit from the XLP sleep-current profile. When designing with this part, place a 100nF decoupling capacitor within 5mm of VDD and use a 10µF bulk cap near the IC. Configure unused pins as outputs and tie to ground to minimize current leakage in sleep mode. For debug, the 4-wire ICSP interface (PGD/PGC/VPP/MCLR) connects directly to the MPLAB Snap or PICkit 4 without external adapters. This page synthesizes distributor pricing, drop-in 28-SOIC alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC16F1783-E/SP - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F1783-E/SP

PIC16F1783-E/SP - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F1783-E/SP is an 8-bit PIC® XLP™ enhanced mid-range microcontroller with 7KB (4K x 14) of Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, delivered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. Operating from 2.5V to 5.5V supply at up to 32 MHz instruction clock (with a stated 20 MHz speed grade noted on some distributor listings), it integrates a 12-bit ADC with up to 17 channels, an 8-bit DAC, op-amps, comparators, and a Core Independent Peripherals (CIPs) block, all on a 200 ns instruction-execution enhanced PIC16 core. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and configurable peripherals (ADCs, timers, communication blocks) onto one die. The PIC16F1783 belongs to the PIC16F178x family of Microchip's enhanced mid-range 8-bit RISC line, marketed under the XLP™ (eXtreme Low Power) family for low-power embedded applications. It is programmed and debugged via the In-Circuit Serial Programming™ (ICSP™) interface using MPLAB X IDE and the XC8 compiler. Key features include 12-bit ADC resolution (versus 10-bit on legacy PIC16F parts), an integrated 8-bit DAC, two op-amps, two comparators, three timers, a 16-bit PWM, an EUSART, MSSP (I2C/SPI), and Microchip's CIPs for offloading tasks like signal generation and motor control from the CPU. The Flash program memory supports self-programming, and the device provides 25 I/O pins for digital interfacing. The PIC16F1783's 12-bit ADC and on-chip 8-bit DAC make it suitable for closed-loop analog control, while the XLP® standing-current modes extend battery life in IoT sensor nodes. Core Independent Peripherals such as the Complementary Waveform Generator (CWG) and Numerically Controlled Oscillator (NCO) execute waveform synthesis in hardware without CPU intervention, supporting low-power sensor signal generation. Typical applications include industrial sensor signal conditioning, battery-powered IoT nodes, LED lighting control, low-power motor control (brushed DC and stepper), automotive body electronics (sensor reading, actuator driving), and consumer white-goods user-interface modules requiring a 12-bit ADC and DAC in a single chip. When designing with this device, ensure that the maximum clock of 32 MHz (8 MHz with 4x PLL) is respected; for low-power designs, leverage the eXtreme Low Power XLP™ sleep modes (down to sub-microamp standby) and configure the ADC acquisition time based on source impedance to maintain 12-bit accuracy. The SPDIP-28 package is preferred for hand-soldered prototypes and field-replaceable industrial modules. This page synthesizes distributor pricing, drop-in PIC16F178x-family alternatives, SPDIP-28 cross-brand comparisons, and practical design notes not found in a single manufacturer datasheet.

見積もり お問い合わせ
PIC16F1783-E/SS - 8-Bit XLP MCU, 7KB Flash, 12-bit ADC | Microchip
PIC16F1783-E/SS

PIC16F1783-E/SS - 8-Bit XLP MCU, 7KB Flash, 12-bit ADC | Microchip

The Microchip Technology PIC16F1783-E/SS is an 8-bit RISC enhanced mid-range PIC16 microcontroller featuring 7KB (4K x 14) of self-read/write Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, housed in a 28-pin SSOP package. The -E suffix denotes the extended industrial operating temperature grade of -40C to +125C. The device integrates a 12-bit ADC, an 8-bit DAC, two PSMC (Programmable Switch Mode Controller) peripherals, an operational amplifier, a Fast Comparator, dedicated 16-bit PWM, and EUSART/I2C/SPI interfaces, all driven by an internal 32MHz oscillator. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and a RISC instruction set, used in embedded applications where deterministic behavior, low power, and simple peripheral integration outweigh raw throughput. PIC16F-series MCUs sit in the mid-range PIC family between baseline PIC10/12 and advanced PIC18/dsPIC parts, offering a balance of analog integration, peripheral count, and code efficiency for sensing, control, and human-interface designs. The XLP (eXtreme Low Power) designation indicates Microchip's nanoWatt technology for sleep currents down to the sub-microamp range. Key features include 49 instruction enhanced mid-range core, 16-level hardware stack, 25 I/O pins, 11-channel 12-bit ADC, 8-bit DAC, two op-amps (configurable), two comparators, two 8/16-bit timers, one 16-bit PWM, two PSMC modules, and EUSART with auto-baud. The 28-SSOP (5.30mm body) package exposes most peripherals through multi-function I/O pins, allowing PCB designers to route SPI, I2C, and analog front-ends without external muxing. Typical applications include sensor signal conditioning with on-chip op-amp + 12-bit ADC, closed-loop fan/SMPS control using PSMC, LED lighting drivers with 16-bit PWM dimming, low-battery IoT nodes powered from XLP sleep modes, and consumer white goods requiring multiple analog channels plus a user interface. The 32MHz internal oscillator eliminates an external crystal in cost-sensitive designs. Design consideration: enable ICD/ICSP via the PGC/PGD pins even in production boards to retain debug access; the device's 49-instruction mid-range core is supported by MPLAB X IDE, XC8 compiler, and the MPLAB Snap programmer/debugger. For noise-sensitive analog measurements, disable unused peripherals and route the analog AVSS/VDD pair with a star-ground topology to avoid digital return-current coupling into the ADC.

見積もり お問い合わせ
PIC16F1783-I/ML - 8-Bit 32MHz MCU 7KB Flash 28-QFN | Microchip
PIC16F1783-I/ML

PIC16F1783-I/ML - 8-Bit 32MHz MCU 7KB Flash 28-QFN | Microchip

The Microchip Technology PIC16F1783-I/ML is an 8-bit PIC16 enhanced mid-range microcontroller integrating 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM data memory in a 28-pin QFN (6x6 mm) exposed-pad package. It executes instructions at a 32 MHz internal clock speed with a 200 ns instruction cycle, and integrates a 12-bit ADC, an 8-bit DAC, operational amplifiers, comparators, and PWM/capture/compare peripherals on-chip. An 8-bit PIC microcontroller belongs to the RISC (Reduced Instruction Set Computer) family that uses Harvard architecture with separate program and data buses, executing most instructions in a single cycle. Within the broader taxonomy, PIC16F MCUs sit between baseline PIC10/12 and PIC18/dsPIC families, balancing code density, peripheral integration and cost. The 'F' suffix denotes Flash program memory allowing in-circuit reprogramming, while the 'XLP' eXtreme Low Power designation indicates sub-uA sleep currents suitable for battery-powered products. Key features include a 12-bit differential ADC, two 8-bit DACs, two internal op-amps, three high-speed comparators, a 16-bit PWM module, and communication peripherals (I2C, SPI, EUSART with auto-baud). The XLP design supports sleep currents below 50 nA typical with retention, making the part attractive for energy-harvesting and battery-fed sensor nodes that wake periodically to read sensors and transmit data. The device is fabricated on a low-power CMOS process and includes an LFINTOSC selectable low-frequency internal oscillator plus HFINTOSC with 1% accuracy across the 1.8-3.6V VDD range. This dual-oscillator approach removes the external crystal in many designs and reduces BOM cost. The integrated op-amps and DACs allow sensor-conditioning signal chains to remain on-chip rather than requiring external analog components. Typical applications include IoT sensor nodes, portable medical monitoring, LED lighting controllers, low-end motor control, battery chargers and small appliances. The wide peripheral set also supports e-metering and remote-control designs that need a low-power MCU with on-chip analog. When designing with the PIC16F1783-I/ML, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal dissipation and ground return. Decoupling caps (100 nF plus 1 uF bulk) should be placed within 3 mm of VDD/AVDD pins. Program via the ICSP interface using MPLAB X IDE and a PICkit programmer. This page consolidates distributor pricing, drop-in alternative candidates and design notes beyond what the standalone datasheet provides, supporting faster component selection and supply-chain decisions.

見積もり お問い合わせ
PIC16F1783-I/MV - 8-bit 32MHz XLP MCU 7KB Flash 28-UQFN
PIC16F1783-I/MV

PIC16F1783-I/MV - 8-bit 32MHz XLP MCU 7KB Flash 28-UQFN

The Microchip Technology PIC16F1783-I/MV is an 8-bit PIC16 enhanced mid-range microcontroller built on the nanoWatt XLP™ (eXtreme Low Power) platform, delivering 32MHz CPU speed with 7KB Flash program memory, 512 bytes RAM, and 256 bytes EEPROM in a compact 28-pin UQFN (4x4mm) package. Key headline parameters include a 32MHz internal oscillator (8MHz with 4x PLL), 2.5V to 5.5V supply range, 12-bit ADC with up to 11 channels, an 8-bit DAC, three op-amps, two 10-bit PWM modules, and integrated mTouch capacitive touch hardware. The -I temperature grade spans -40C to +85C industrial range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals onto one silicon die, executing instructions one byte at a time. PIC16F MCUs sit in the product hierarchy as: PIC16F1783 -> PIC16 enhanced mid-range -> PIC16 family -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 'XLP' branding denotes Microchip's ultra-low-power technology targeting battery-powered and energy-harvesting applications. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, allowing instruction fetch and data access to occur in the same clock cycle. Key differentiating features include three on-chip operational amplifiers with configurable rail-to-rail inputs, eliminating external analog signal conditioning in sensor interfaces; a 12-bit ADC with acquisition-time control delivering >50 ksps conversion rates; two 10-bit PWM generators with dedicated time bases for motor and lighting control; an 8-bit DAC usable for monochrome monitoring; and zero-cross detection circuitry for triac-based dimming. The integrated capacitive-touch mTouch peripheral enables up to 8 touch sensors without external components. Architecturally, the PIC16F1783 employs a 14-bit instruction word with 200ns minimum instruction execution at 20MHz instruction rate, an 8-level hardware stack, and 16 interrupt sources with vectored context saving. The XLP nanoWatt technology provides multiple idle, sleep, and run modes with current consumption as low as [DATA_NEEDED: XLP datasheet idle/sleep current values]. Typical applications include consumer white goods control panels, IoT sensor nodes with capacitive touch, battery-powered instrumentation with on-chip op-amp signal conditioning, LED lighting drivers with analog dimming, low-cost motor control boards, and industrial process control front-ends. Design with this device by leaving 4 GPIO free for in-system programming via ICSP and choosing your clock source carefully: the internal 32MHz HFINTOSC eliminates external crystals but consumes more current than the LFINTOSC during sleep. Use Microchip's MPLAB X IDE with XC8 compiler and MPLAB Code Configurator for fastest peripheral setup. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC16F178x family, and practical design notes not found in the standalone manufacturer datasheet PDF.

見積もり お問い合わせ
PIC16F1783-I/SS - 8-Bit MCU, 32MHz, 7KB Flash, SSOP-28 | Microchip
PIC16F1783-I/SS

PIC16F1783-I/SS - 8-Bit MCU, 32MHz, 7KB Flash, SSOP-28 | Microchip

The Microchip Technology PIC16F1783-I/SS is an enhanced mid-range 8-bit CMOS flash microcontroller built on the PIC16 architecture with 200 ns instruction execution and 32 MHz internal operation. It integrates 7 KB (4K x 14) of self-programmable flash, 512 bytes of RAM, and 256 bytes of EEPROM data memory, all within a 28-pin SSOP (5.30 mm body) surface-mount footprint. The device targets designs that demand advanced analog and core-independent peripherals in a compact, low-pin-count package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a rich set of on-chip peripherals. The PIC16F1783 sits within Microchip's PIC16F enhanced mid-range family, itself a subclass of the broader PIC microcontroller family, which is widely adopted in industrial, consumer, and automotive electronics. The -I/SS suffix indicates an industrial temperature range (-40C to +85C) in the SSOP-28 package. Key features include a 12-bit ADC with up to 14 channels, an 8-bit DAC, two operational amplifiers, two high-speed comparators, a 16-bit PWM with PSMC (Programmable Switch Mode Controller), and Core Independent Peripherals (CIPs) such as CWG, NCO, and DSM. Communication interfaces cover I2C, SPI, and EUSART. These integrated analog blocks eliminate the need for many external components, reducing both BOM cost and PCB area in sensor-conditioning and closed-loop control designs. Architecturally, the PIC16F1783 uses a 14-bit instruction word RISC engine with a hardware multiplier, an interrupt controller with context save, and a Peripheral Pin Select (PPS) module that remaps digital I/O functions, simplifying PCB routing. The XLP (eXtreme Low Power) design supports sleep currents below 50 nA typical, making it suitable for battery-powered and energy-harvesting applications. Typical applications include industrial sensor signal conditioning, LED lighting and constant-current drivers, small appliance control, low-end BLDC/PMSM fan drivers via the PSMC, and portable instrumentation where the integrated op-amps condition transducer signals directly. Designers also deploy the part in white-goods user-interface controllers and IoT edge-node sensor hubs that require local analog processing. When designing with the PIC16F1783-I/SS, plan analog and digital ground partitioning early, place the 0.1 uF VDD decoupling capacitor within 3 mm of the supply pin, and use Microchip's MPLAB X IDE with the XC8 compiler for code development. Programming and debugging are supported via the MPLAB PICkit 5 or ICD 4 in-circuit tools over the ICSP interface on pins 1 and 28. This page combines distributor pricing, same-brand drop-in alternatives, application-specific design guidance, and pin-to-pin comparison data not found in the manufacturer datasheet, helping engineers select, source, and integrate the PIC16F1783-I/SS faster.

見積もり お問い合わせ
PIC16F1783T-I/MV - 8-Bit 32MHz MCU, 7KB Flash, 28-UQFN | Microchip
PIC16F1783T-I/MV

PIC16F1783T-I/MV - 8-Bit 32MHz MCU, 7KB Flash, 28-UQFN | Microchip

The Microchip PIC16F1783T-I/MV is an 8-bit PIC® XLP™ flash microcontroller running up to 32 MHz with 7 KB (4K x 14) of program memory, housed in a 28-pin UQFN (4x4 mm) package with an exposed pad. The part is part of the PIC16F178x family of "advanced analog" mid-range MCUs and integrates 512 B of RAM and 256 B of EEPROM on-chip. The wide 2.5 V to 5.5 V supply range allows direct operation from 2-cell battery stacks, regulated 3.3 V rails, or USB-derived 5 V buses. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), non-volatile data storage (EEPROM), and a rich set of peripheral blocks. The PIC16F1783 family sits in Microchip's enhanced mid-range (XLP™) portfolio, marketed as a low-power, mixed-signal part for sensor conditioning and analog front-end applications. Conceptually the part is a hybrid of a CMOS RISC microcontroller (programmable state machine), an analog front-end (12-bit ADC, 8-bit DAC, on-chip op-amp), and a digital signal controller (PSMC peripheral for power-converter control). Key differentiating specifications include three operational 12-bit ADC modules with up to 14 channels, an 8-bit DAC, two on-chip operational amplifiers, a Power Supply Modulation Controller (PSMC), and an integrated temperature indicator. The chip supports EUSART with auto-baud, I2C/SPI, and up to four CCP/PWM channels. nanoWattMillis XLP™ technology provides sub-µA sleep currents for battery-powered sensor nodes. The architecture is built around a Harvard RISC core with a 14-bit instruction word, 200 ns instruction execution, and a hardware multiplier. On-chip peripherals are mapped to I/O via Peripheral Pin Select (PPS), which simplifies PCB routing on the small 4x4 mm UQFN. Typical applications include IoT sensor hubs, smart battery management, industrial sensor signal conditioning, lighting ballast control, and small BLDC/PMSM motor drives. The wide analog integration suits industrial 4-20 mA loop transmitters and medical/clinical instrument front-ends. When designing with this part, observe Microchip's UQFN-28 land-pattern guidelines for the exposed thermal pad - it must be soldered to a ground pour for thermal dissipation and electrical reference. Use MPLAB® X IDE and the XC8 compiler for firmware development. This page synthesizes distributor pricing, drop-in alternatives from Microchip's own portfolio, and practical PCB-layout notes not collected in any single datasheet.

見積もり お問い合わせ