マイクロコントローラ

製品 (18711)

ATSAM3S4AA-MU - 64MHz Cortex-M3 256KB Flash MCU | Microchip
ATSAM3S4AA-MU

ATSAM3S4AA-MU - 64MHz Cortex-M3 256KB Flash MCU | Microchip

The Microchip Technology (Atmel) ATSAM3S4AA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 256 KB of embedded flash memory and 48 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the lowest level of the embedded-systems hierarchy: microcontroller -> embedded processor -> SoC. The SAM3S series belongs to Atmel/Microchip's SMART ARM-based MCU family and is pin-to-pin compatible with the legacy AT91SAM7S products in 48- and 64-pin versions, easing migration from older designs. Key features include an ARM Cortex-M3 revision 2.0 core with a Thumb-2 instruction set, a Memory Protection Unit (MPU), a 128-bit-wide flash access with a memory accelerator for efficient 64 MHz execution, and an internal 1.62V-3.6V single-supply operating range. Peripherals include USB 2.0 device, USARTs, SPI, TWI (I2C), 12-bit ADC, PWM channels, and a real-time clock, enabling compact single-chip designs. The Cortex-M3 architecture provides deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC) and hardware division, making the device well suited for real-time control loops. The embedded flash controller allows in-system programming and the device supports SWD debug through the serial wire debug port. Typical applications include industrial sensing nodes, consumer HMI devices, USB accessories, battery-powered portable instruments, and legacy AT91SAM7S upgrades where a drop-in performance boost is desired. A key design consideration: the exposed pad of the QFN-48 package must be soldered to a ground plane for both thermal dissipation and signal-integrity reasons; do not treat it as a no-connect. This page adds value beyond the datasheet by compiling verified distributor pricing, same-package drop-in alternatives, application guidance, and cross-reference data not found in the manufacturer documentation.

見積もり お問い合わせ
ATSAM3S4AA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4AA-MUR

ATSAM3S4AA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4AA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 256 KB of embedded flash memory and 48 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. The MUR suffix indicates Tape & Reel packing for automated assembly. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy between simple logic devices and full application processors. The SAM3S series is Microchip's (formerly Atmel) medium-range general-purpose MCU family, positioned for designs balancing low power consumption, processing power, and peripheral integration. Key features include the 64 MHz Cortex-M3 core with a 3-stage pipeline and Thumb-2 instruction set, 256 KB (256K x 8) of zero-wait-state flash, and an operating supply range of 1.62 V to 3.6 V. The device integrates a fast 12-bit ADC, an on-chip 1.8 V LDO regulator (VDDOUT), USB 2.0 full-speed device port on SAM3S A-variant peripherals, and parallel data capture mode on the PIOs that collects data from non-standard sources such as low-cost image sensors, with DMA offloading the CPU. Technical depth: the SAM3S architecture pairs the Harvard-architecture Cortex-M3 with an on-chip ARC bus, nested vectored interrupt controller, and 12-channel DMA, enabling peripheral-to-memory transfers without CPU intervention. Flash memory is organized to permit simultaneous read-while-write operation for EEPROM emulation. Power management modes include backup, wait, and sleep, supporting battery-operated designs. Typical applications include industrial sensing and control nodes, consumer appliances, battery-powered portable instruments, USB-connected devices, and image-sensor front ends leveraging the parallel capture mode. Design consideration: operate within the 1.62 V to 3.6 V supply window and decouple VDDIN with the LDO output VDDOUT per the manufacturer datasheet to preserve ADC accuracy and EMC performance. This page synthesizes distributor pricing, verified drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S4BA-AUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4BA-AUR

ATSAM3S4BA-AUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-AUR is a 32-bit ARM Cortex-M3 RISC microcontroller from the SAM3S series, delivering 64 MHz maximum core speed, 256KB (256K x 8) Flash program memory, and 49KB SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the heart of embedded systems. Within the product hierarchy, the SAM3S sits under ARM Cortex-M3 based flash microcontrollers -> 32-bit MCUs -> embedded processors. The ATSAM3S4BA is a member of Microchip's (formerly Atmel) SAM3S series, a cost-optimized Cortex-M3 family targeting industrial and consumer embedded designs. Key features include the 64 MHz ARM Cortex-M3 RISC core, 256KB of on-chip Flash, 49KB of SRAM, and a rich peripheral set covering HSMCI (high-speed multi-media card interface), I2C, I2S, IrDA, SPI, SSC (synchronous serial controller), TWI, UART, USART, and USB device connectivity. A DMA controller offloads the CPU by moving data directly to memory, improving real-time throughput. Technically, the device operates from a single 1.62V to 3.6V supply (typical 1.8V/3.3V rails), and Microchip documents that it is pin-to-pin compatible with the SAM3N4B and SAM7S64, allowing footprint reuse and BOM migration across the family. The 10x10 mm 64-LQFP with 0.5 mm pitch is hand-solderable and suitable for two-layer and four-layer industrial boards. Typical applications include industrial control nodes, consumer appliances, battery-powered portable instruments, and USB-connected sensor interfaces, where the Cortex-M3 performance, USB device port, and DMA-driven peripherals fit well. When designing with this MCU, budget Flash and SRAM conservatively: 256KB Flash and 49KB SRAM are ample for bare-metal or RTOS-based control firmware, but leave headroom for OTA-style field updates. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S4BA-MU - Cortex-M3 64MHz MCU 256KB Flash | Microchip
ATSAM3S4BA-MU

ATSAM3S4BA-MU - Cortex-M3 64MHz MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz, with 256KB of embedded Flash and 48KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A flash microcontroller is a single-chip computing device that integrates a processor core, program memory, data memory, and peripherals such as UART, SPI, I2C, ADC, and timers onto one silicon die. Microcontrollers sit at the device level of the embedded-system hierarchy, below SoCs and application processors, and the SAM3S series belongs to the broader ARM Cortex-M MCU family alongside SAM3N, SAM4S, and SAMD product lines from Microchip. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, 128-bit wide Flash access with a memory accelerator for near-zero-wait-state execution, and pin-to-pin compatibility with the AT91SAM7S series in 48- and 64-pin versions, which simplifies migration for designs needing more performance. Operating supply is 1.62V to 3.6V with core operation at 1.08V to 1.32V, and the part is rated for industrial temperature ranges. Technically, the SAM3S integrates a multilayer bus matrix, 12-channel DMA controller (PDC), USB 2.0 full-speed device port, and a rich peripheral set including USART, SPI, TWI, PWM, and a 12-bit ADC, allowing deterministic real-time control with low interrupt latency. Typical applications include industrial control and automation, battery-powered portable instruments, and human-machine interface nodes, where the combination of 64 MHz performance, DMA offload, and 1.62V low-voltage operation fits power-conscious designs. A key design consideration is that peripheral-to-pin mapping on the 64-QFN requires careful pin multiplexing review; confirm ADC channel assignments and USB D+/D- routing before locking the PCB footprint. This page synthesizes distributor pricing, drop-in alternatives, design notes, and parametric comparisons not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S4BA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4BA-MUR

ATSAM3S4BA-MUR - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4BA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller in the SAM3S series, running at up to 64 MHz with 256 KB of Flash memory and 48 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-systems hierarchy: microcontroller unit -> embedded processor -> semiconductor IC. The SAM3S family belongs to Microchip's (formerly Atmel) 32-bit ARM-based MCU portfolio, positioned for cost-sensitive industrial and consumer designs that need more performance than 8-bit parts without the complexity of application processors. Key features of the ATSAM3S4BA-MUR include the 64 MHz Cortex-M3 RISC core with Thumb-2 instruction set, 256 KB (256K x 8) of on-chip Flash for code storage, 48 KB of SRAM, and operation over a wide 1.62V to 3.6V single-supply range. The device is fabricated as a green, RoHS-compliant part, supplied in Tape & Reel (the -R suffix), and rated for industrial temperature ranges. From a technical standpoint, the Cortex-M3 core integrates a nested vectored interrupt controller (NVIC) and offers deterministic interrupt latency, while the SAM3S peripheral set includes DMA that transfers data to memory and offloads the CPU, reducing real-time burden. According to Microchip's product page, the device is pin-to-pin compatible with the SAM3N4B and SAM7S64, enabling easy migration between performance tiers on the same PCB footprint. Typical applications include industrial control panels, consumer appliances, battery-powered metering, and USB-connected embedded devices, where 64 MHz Cortex-M3 throughput, integrated DMA, and low-power operation fit well. A key design consideration: verify Flash size headroom, since pin-compatible SAM3N4B alternatives may offer different peripheral sets even on the same footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S4CA-CU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3S4CA-CU

ATSAM3S4CA-CU - 64MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3S4CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 64 MHz with 256 KB of embedded Flash and 48 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. It belongs to the SAM3S series of Atmel-origin (now Microchip) ARM-based Flash MCUs for low-power embedded systems. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (Flash for program storage and SRAM for data), and peripherals on one die, forming the lowest layer of the embedded processing hierarchy: ARM Cortex-M3 core -> 32-bit MCU -> embedded processor -> semiconductor. MCUs execute dedicated control tasks in everything from consumer appliances to industrial automation, replacing multi-chip solutions with lower cost and power. Key features of the ATSAM3S4CA-CU include the 64 MHz ARM Cortex-M3 RISC core with Thumb-2 instruction set, 256 KB (256K x 8) of Flash program memory, 48 KB of SRAM, and a wide supply range of 1.62 V to 3.6 V. The device integrates a DMA controller that offloads the CPU for peripheral-to-memory transfers, and it is packaged as a 100-TFBGA (9x9) ball grid array for compact, high-density PCB layouts. Mouser lists it as industrial temperature range with MRL A packing classification. Technically, the SAM3S family implements the Cortex-M3 pipeline with nested vectored interrupt controller (NVIC), and per the Microchip product page for the related ATSAM3S4C variant, the family is pin-to-pin compatible with the SAM3N4C series, giving designers a migration path between entry-level and feature-rich parts. The core runs from an internal supply domain of roughly 1.08 V to 1.32 V (1.2 V typical regulator output) per published parametric data. Typical applications include industrial control and factory automation nodes, battery-powered portable instruments leveraging the low-voltage operating range, and consumer appliances requiring 32-bit processing headroom with USB or serial connectivity. When designing with this device, budget the 256 KB Flash and 48 KB SRAM early: projects that grow past these limits require migration to ATSAM3S8-class devices in the same footprint family. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S8BA-AU - Cortex-M3 64MHz 512KB Flash MCU | Microchip
ATSAM3S8BA-AU

ATSAM3S8BA-AU - Cortex-M3 64MHz 512KB Flash MCU | Microchip

The Microchip (Atmel) ATSAM3S8BA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB of embedded flash memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A flash microcontroller of this class integrates a processor core, program memory, SRAM, and a rich peripheral set on a single die, sitting in the hierarchy of 32-bit MCU -> ARM-based microcontroller -> embedded processor. The SAM3S family belongs to the Atmel SMART ARM-based MCU line and executes the Thumb-2 instruction set with an integrated Memory Protection Unit (MPU) for robust embedded software architectures. Key features include the ARM Cortex-M3 revision 2.0 core at 64 MHz, 512KB (512K x 8) of flash program memory, and an integrated full-speed USB 2.0 device transceiver that enables fast data up/downloading without an external PHY. Peripheral connectivity covers I2C (TWI), SPI, UART/USART, SSC (I2S audio), IrDA, memory card (SD/MMC/SDIO), and USB, with 47 general-purpose I/O lines. Supporting peripherals include DMA, PWM, watchdog timer, brown-out detect/reset, and power-on reset. From an architecture standpoint, the Cortex-M3 Harvard structure with Thumb-2 delivers high code density and deterministic interrupt handling via the Nested Vectored Interrupt Controller. The device operates from 1.8V, 2.5V, or 3.3V supply rails, and the family is documented as pin-to-pin compatible with the legacy Atmel AT91SAM7S series, simplifying migration for existing designs. Native Atmel QTouch capacitive touch support is available across the family. Typical applications include USB-connected industrial instruments, human-machine interfaces with capacitive touch, motor control and power-monitoring nodes, and data-logging systems that transfer logged data over USB mass-storage or CDC classes. A key design consideration is supply-domain planning: the device separates VDDCORE and VDDIO supplies, so designers must provide the recommended decoupling and respect the 1.62V-to-3.6V IO range when interfacing with 5V-tolerant or 1.8V logic. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3S8BA-MU - 64MHz Cortex-M3, 512KB Flash MCU | Microchip
ATSAM3S8BA-MU

ATSAM3S8BA-MU - 64MHz Cortex-M3, 512KB Flash MCU | Microchip

The Microchip Technology ATSAM3S8BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 512 KB embedded flash memory, supplied in a 64-pin QFN (9x9 mm) exposed-pad package. Operating from 1.8V, 2.5V, or 3.3V supplies, it integrates USB 2.0 full-speed device, a 12-bit ADC, and up to 47 GPIO lines. A microcontroller unit (MCU) is a single-chip computer that combines a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the ATSAM3S8BA-MU belongs to the SAM3S series of 32-bit microcontrollers, which sits above 8-bit MCUs in processing capability and below application processors in complexity, serving the embedded control and power management segment of the industry. Key features include the ARM Cortex-M3 core with a 3-stage pipeline and Harvard architecture delivering 1.25 DMIPS/MHz, 512 KB of single-cycle flash with a page-erase/word-write controller, a full-speed USB device port with on-chip transceiver, and an asynchronous/synchronous serial controller set including USART, SPI, and TWI (I2C). A 12-bit ADC and 10-bit DAC support mixed-signal designs, and an internal RC oscillator plus PLL system allow clock generation from multiple sources. Technical depth: the SAM3S series employs a multi-layer AHB bus matrix that lets the CPU, DMA channels, and USB access different slaves concurrently, reducing bus contention. Embedded flash controllers with wait-state acceleration keep zero-wait-state execution across the 64 MHz operating range. The exposed-pad QFN package provides a low-inductance ground path, aiding analog performance and thermal dissipation. Typical applications include consumer and industrial human-machine interfaces with LCD and touch-sensing support, battery-powered portable instruments, and USB-connected industrial sensors where the integrated USB device port removes the need for a separate USB interface chip. Design consideration: use a solid ground connection to the exposed pad and decouple each VDDIO/VDDCORE pin pair with 100 nF capacitors placed within 2 mm of the pins; flash programming requires VDDCORE within its specified range during erase/write operations. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-19.

見積もり お問い合わせ
ATSAM3S8BA-MUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3S8BA-MUR

ATSAM3S8BA-MUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3S8BA-MUR is a 32-bit ARM Cortex-M3 microcontroller of the SAM3S series operating at up to 64 MHz with 512 KB (512K x 8) Flash program memory and 64 KB SRAM, housed in a 64-pin QFN (9x9 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, non-volatile program memory, SRAM data memory, and a rich set of peripheral interfaces into one chip, forming the compute layer of an embedded system. Within the component hierarchy, the SAM3S8B belongs to the 32-bit MCU family, under ARM-based microcontrollers, under the broader category of semiconductors and integrated circuits. Key features include the ARM Cortex-M3 RISC core at 64 MHz, 512 KB of on-chip Flash and 64 KB of SRAM, a USB 2.0 Full-Speed Device port (12 Mbps, 2668-byte FIFO, up to 8 bidirectional endpoints) with on-chip transceiver, and industrial temperature operation. According to the Microchip SAM3S8B product page, the extended peripheral set supports embedded designs that need both connectivity and analog control in a compact footprint. Technically, the device integrates up to 3 USARTs supporting ISO7816, IrDA, RS-485, SPI, Manchester and modem modes, two 2-wire UARTs, up to 2 TWI (I2C-compatible) interfaces, 1 SPI, 1 Serial Synchronous Controller (I2S), 1 high-speed multimedia card interface (SDIO/SD Card/MMC), and 6 three-channel 16-bit Timer/Counters. The supply range is 1.62 V to 3.6 V, allowing single-supply battery operation with an internal regulator. Typical applications include industrial control panels, consumer devices with USB connectivity, battery-powered metering, and data-logging systems that leverage the SD/MMC interface. A key design consideration is supply decoupling: use low-ESR ceramic capacitors on VDDIO and VDDCORE per the datasheet power scheme, and note that GPIO current must be budgeted across I/O banks. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing (LCSC from $6.9177 as of 2026-09-19), drop-in same-family alternatives, and practical design guidance in one AI-citable resource.

見積もり お問い合わせ
ATSAM3S8CA-CU - Cortex-M3 MCU 512KB Flash 64MHz | Microchip
ATSAM3S8CA-CU

ATSAM3S8CA-CU - Cortex-M3 MCU 512KB Flash 64MHz | Microchip

The Microchip Technology ATSAM3S8CA-CU is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512KB (512K x 8) of embedded Flash memory, housed in a 100-ball TFBGA (9 x 9 mm) package. Per DigiKey and Octopart product listings, it belongs to the SAM3S series and integrates a rich peripheral set for embedded control applications. A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog blocks. Within the power-management hierarchy of embedded systems, the MCU sits at the center, coordinating sensors, actuators, and communication. The ARM Cortex-M3 core is a 32-bit RISC processor widely used in cost-sensitive, low-power embedded designs, and the SAM3S family extends this core with Microchip (formerly Atmel) peripheral IP. Key differentiating features of the ATSAM3S8CA-CU include its 64 MHz maximum CPU clock frequency, 512KB of on-chip Flash for program storage, and the compact 100-TFBGA ball-grid package that saves board area in space-constrained designs. The digchip specification listing also documents 47 I/O ports, a Flash-based program memory type, and a core supply range of 1.08 V to 1.32 V, supporting low-voltage core operation with 3.3 V-class I/O. Technically, the Cortex-M3 core implements the ARMv7-M architecture with a 3-stage pipeline, Thumb-2 instruction set, and a nested vectored interrupt controller (NVIC) for deterministic interrupt latency. The SAM3S series adds Microchip peripherals such as USARTs, SPI, TWI (I2C), PWM channels, an ADC, and a USB device port (refer to the manufacturer datasheet for the exact peripheral allocation of this device). The embedded Flash controller allows in-system programming and fast code execution. Typical applications include industrial control and factory automation nodes, consumer and portable devices requiring small footprint and moderate processing, and embedded systems that need USB connectivity with 512KB of code space. The 9 x 9 mm TFBGA package suits high-density PCBs where QFP footprints are too large. Design consideration: the TFBGA package requires careful PCB land-pattern design and reflow assembly; verify ball map and core versus I/O supply decoupling against the manufacturer datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers and buyers a single decision-ready resource.

見積もり お問い合わせ
ATSAM3S8CA-CUR - 64MHz Cortex-M3 MCU, 512KB Flash | Microchip
ATSAM3S8CA-CUR

ATSAM3S8CA-CUR - 64MHz Cortex-M3 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAM3S8CA-CUR is a 32-bit ARM Cortex-M3 microcontroller from the SAM3S series operating at up to 64 MHz with 512 KB of embedded Flash memory and 64 KB of SRAM, housed in a 100-ball TFBGA package measuring 9x9 mm. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die, forming the lowest level of the embedded-system hierarchy (MCU -> embedded processor -> system-on-chip). The SAM3S family belongs to the ARM Cortex-M class of 32-bit RISC microcontrollers, positioned for cost-sensitive, low-power general-purpose control applications where deterministic interrupt handling and rich analog integration matter more than raw compute throughput. Key features include the ARMv7-M architecture with Thumb-2 instruction set for high code density, a maximum CPU clock of 64 MHz, 512 KB (512K x 8) of Flash program memory, and an industrial operating temperature grade. Per Microchip product documentation for the ATSAM3S8C device, the family integrates 64 KB of SRAM and extended peripheral options including UART, SPI, TWI, and USB connectivity, alongside a multi-row memory controller (MRL A rating per Mouser listing). Architecturally, the Cortex-M3 core provides a 3-stage pipeline, a nested vectored interrupt controller (NVIC), and hardware division, allowing deterministic low-latency interrupt response that suits real-time control loops. The Flash accelerator keeps the 64 MHz core fed from single-cycle-wait Flash, and the 1.8 V-class supply operation (per distributor listing data) supports low-power battery-operated designs. Typical applications include industrial automation nodes, portable and battery-powered instruments, USB-connected sensor hubs, and building-control or metering endpoints. The small 9x9 mm 100-TFBGA footprint also suits compact consumer devices where board area is constrained. Design consideration: the fine-pitch 0.8 mm ball pitch of the TFBGA demands careful PCB stackup and via-in-pad or escape routing on 4-layer boards, and power integrity on the 1.62-3.6 V-class supply domain should be verified with adequate decoupling on all VDDIO/VDDCORE ball groups. This page synthesizes distributor pricing context, drop-in alternatives, cross-reference data, and practical design guidance not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3SD8BA-AU - 512KB Flash Cortex-M3 MCU 64MHz | Microchip
ATSAM3SD8BA-AU

ATSAM3SD8BA-AU - 512KB Flash Cortex-M3 MCU 64MHz | Microchip

The Microchip Technology ATSAM3SD8BA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB (512K x 8) Flash memory and 100KB SRAM, housed in a 64-pin LQFP (10 x 10 mm) surface-mount package with industrial temperature grading. A 32-bit flash microcontroller is an embedded processing IC that integrates a processor core, program memory, data SRAM, and a rich set of peripherals on a single chip, forming the compute layer of the broader embedded systems hierarchy: Cortex-M3 core -> SAM3S MCU family -> 32-bit microcontroller -> embedded system IC. The SAM3S family descends from the Atmel AVR/ARM legacy and is pin-to-pin compatible with the AT91SAM7S series, providing an easy migration path for legacy designs. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, a high-speed USB 2.0 device port with an integrated transceiver for plug-and-play connectivity, and a core supply domain of 1.08V to 1.32V with 1.62V to 3.6V I/O operation. The 47 general-purpose I/O lines, multiple USART/SPI/TWI serial channels, and a 12-bit DAC on the SD8 variant suit mixed analog-digital designs. Technically, the device combines a high-speed flash controller with a multi-layer bus matrix, sustaining zero-wait-state execution in large measure and robust EMI tolerance. The integrated USB transceiver eliminates the external PHY, reducing BOM cost and board area. The embedded 12-bit DAC and hardware interleaved Flash architecture differentiate the SAM3SD8 from the SAM3S8 non-DAC sibling. Typical applications include USB-connected industrial data loggers, test and measurement interfaces, patient monitoring accessories, and consumer appliances requiring USB firmware upgrade capability and moderate analog output capability. For design, decouple the VDDCORE domain carefully and observe the 1.62V to 3.6V I/O constraint; the internal 1.2V core regulator requires an external output capacitor per the reference design. This page synthesizes distributor pricing, verified alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3SD8BA-AUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8BA-AUR

ATSAM3SD8BA-AUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8BA-AUR is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512KB (512K x 8) FLASH memory, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the heart of an embedded system. The ATSAM3SD8BA-AUR belongs to the SAM3S family within the ARM Cortex-M class of 32-bit MCUs, sitting in the hierarchy: Cortex-M3 -> ARM embedded processor -> 32-bit microcontroller -> system-on-chip. Key features include a 64 MHz Cortex-M3 core with an industry-standard Thumb-2 instruction set, 512KB of on-chip FLASH supporting in-system programming, an industrial temperature rating (per distributor data, IND TEMP grade), and a wide supply range of 1.8V to 3.3V as listed by distributors. The device also integrates a fast Flash Access accelerator and rich connectivity peripherals typical of the SAM3S family. Architecturally, the SAM3S series pairs the Cortex-M3 core with an AHB/APB bus matrix, Nested Vectored Interrupt Controller, and low-power modes, enabling deterministic real-time performance. The 512KB FLASH allows large application firmware, bootloaders, and OTA-style update schemes without external memory. Typical applications include industrial control panels, consumer appliance interfaces, data-logging equipment, and USB-connected embedded systems where a 512KB flash budget and 64 MHz headroom are required. Design consideration: place 0.1uF decoupling capacitors close to each supply pin and follow the SAM3S datasheet clock layout guidance for the external crystal circuit. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing referenced is as of 2026-09-19.

見積もり お問い合わせ
ATSAM3SD8BA-MU - Cortex-M3 MCU 64MHz 512KB Flash | Microchip
ATSAM3SD8BA-MU

ATSAM3SD8BA-MU - Cortex-M3 MCU 64MHz 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8BA-MU is a 32-bit ARM Cortex-M3 flash microcontroller running at 64 MHz with 512KB (512K x 8) of embedded Flash memory, housed in a 64-pin QFN (9x9 mm) exposed-pad package. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor based on the ARMv7-M architecture, combining a 3-stage pipeline core with a Nested Vectored Interrupt Controller (NVIC) and efficient Thumb-2 instruction set. Within the power hierarchy of embedded systems, an MCU like the SAM3S series integrates CPU, memory, peripherals, and clocking onto a single chip, serving as the main system controller in embedded product designs. Key features include the 64 MHz Cortex-M3 core delivering approximately 1.25 DMIPS/MHz, 512KB on-chip Flash with a dedicated page-erase controller, the SAM3S peripheral set including USB, USART, SPI, TWI, and ADC peripherals, and operation from 1.8V, 2.5V, or 3.3V supply rails per distributor data. The industrial temperature grade (IT) suits deployments beyond office environments, and the green/RoHS 64-QFN package with exposed pad supports thermal and ground-plane design. The ATSAM3SD8 belongs to the SAM3S Flash family (AT91SAM architecture), positioning it as Microchip/Atmel's cost-optimized general-purpose Cortex-M3 line. The fixed-ROM variant (SAM3SD8) targets secure code storage, while the in-system-programmable Flash supports field firmware updates over USB or UART. Typical applications include industrial control panels, consumer appliances, battery-powered data loggers, and USB-connected embedded devices where a 64 MHz 32-bit core with 512KB program memory covers code growth without a redesign. When designing with this device, budget Flash usage against the 512KB limit and confirm the 1.62V-3.6V supply window against your rail tolerances; the exposed pad must be soldered to a ground pour for signal integrity and thermal performance. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, adding cross-reference value beyond standard product listings.

見積もり お問い合わせ
ATSAM3SD8BA-MUR - 512KB Flash Cortex-M3 MCU 64MHz | Microchip
ATSAM3SD8BA-MUR

ATSAM3SD8BA-MUR - 512KB Flash Cortex-M3 MCU 64MHz | Microchip

The Microchip Technology ATSAM3SD8BA-MUR is a 32-bit ARM Cortex-M3 flash microcontroller from the SAM3S series, running at up to 64 MHz with 512KB (512K x 8) of embedded flash memory, supplied in a 64-pin VQFN (9x9 mm) package with exposed pad for industrial temperature applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, executing embedded control and connectivity tasks. Within the product hierarchy, the ATSAM3SD8BA-MUR belongs to the ARM Cortex-M3 core family of microcontrollers, which sits under 32-bit MCUs, under the broader microcontroller semiconductor category. The SAM3S series is Atmel/Microchip's general-purpose flash MCU line optimized for cost-sensitive industrial and consumer designs that need a balance of performance, memory, and peripheral integration. Key features of the ATSAM3SD8BA-MUR include the 64 MHz Cortex-M3 RISC processor with nested vectored interrupt controller, 512KB of on-chip flash for program storage, a rich peripheral set typical of the SAM3S family (USART, SPI, TWI/I2C, PWM, ADC, and USB device connectivity per the SAM3SD8 family definition), industrial temperature grade operation, and green/RoHS packaging marked MRL A per distributor listings. The SAM3SD8 variant integrates a dedicated USB device port, making it distinct within the SAM3S family for applications requiring USB connectivity without an external USB controller. The Cortex-M3 architecture provides deterministic interrupt latency and Thumb-2 instruction efficiency, enabling compact code in the 512KB flash while delivering real-time responsiveness for control loops. Typical applications include industrial control and automation nodes, consumer appliances with USB interfaces, PC peripherals and accessories, battery-powered instrumentation, and building automation sensors where 64 MHz performance and 512KB code capacity are appropriate. Design consideration: the exposed-pad QFN package requires a well-defined thermal via array and solid ground connection on the PCB land pattern; verify supply voltage options (1.8V/2.5V/3.3V per family documentation) against your power tree before layout. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design guidance not consolidated in the manufacturer datasheet, providing engineers and buyers a single citable reference for the ATSAM3SD8BA-MUR.

見積もり お問い合わせ
ATSAM3SD8CA-AU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-AU

ATSAM3SD8CA-AU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology (Atmel) ATSAM3SD8CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 64 MHz with 512KB (512K x 8) embedded Flash, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor IC. The SAM3S family belongs to the ARM Cortex-M class of 32-bit MCUs, which are widely used in industrial control, consumer devices, and IoT nodes where deterministic, low-power real-time performance is required. Key features include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust software partitioning, and a high-speed USB device port with an integrated transceiver, enabling fast data up/downloading and plug-and-play USB connectivity without an external PHY. Operating voltage spans 1.62V to 3.6V (1.8V/2.5V/3.3V supply systems supported). Architecturally, the ATSAM3SD8CA-AU combines the Cortex-M3 three-stage pipeline with a rich peripheral set typical of the SAM3S series, including USARTs, SPI, TWI, ADC channels, PWM outputs, and a DMA controller. It is pin-to-pin compatible with AT91SAM7S legacy products, providing a direct migration path from Atmel ARM7 designs with higher performance and lower power consumption. Typical applications include industrial control panels, USB data loggers, point-of-sale terminals, battery-powered metering equipment, and consumer appliances that require USB connectivity with 32-bit processing headroom. The 512KB flash accommodates complex firmware stacks such as USB device class drivers and RTOS-based designs. A key design consideration is power management: the SAM3S offers multiple sleep and wait modes, so firmware should exploit these modes plus the dynamic clock controller to minimize average current draw in battery applications. This page synthesizes verified distributor pricing, drop-in alternatives from the same SAM3S family, and practical design notes not found in the manufacturer datasheet, adding selection and cross-reference value beyond standard catalog listings.

見積もり お問い合わせ
ATSAM3SD8CA-AUR - 64MHz Cortex-M3 512KB MCU | Microchip
ATSAM3SD8CA-AUR

ATSAM3SD8CA-AUR - 64MHz Cortex-M3 512KB MCU | Microchip

The Microchip Technology ATSAM3SD8CA-AUR is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 64 MHz with 512KB (512K x 8) of flash memory and 64KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog converters. Within the product hierarchy, this device belongs to the SAM3S series -> ARM Cortex-M3 MCUs -> 32-bit microcontrollers -> embedded processors, a family widely used in industrial and consumer embedded systems. Key features of the ATSAM3SD8CA-AUR include dual-bank flash architecture with two 256KB banks that enables safe in-application self-programming and firmware updates without external memory, a rich peripheral set typical of the SAM3S family, and industrial-grade temperature operation. The AUR ordering code denotes a tape-and-reel packaged, green/RoHS-compliant industrial temperature device. Architecturally, the device implements the ARMv7-M Cortex-M3 RISC core with a nested vectored interrupt controller (NVIC) providing deterministic low-latency interrupt handling, plus a Thumb-2 instruction set that delivers high code density. The 1.62V to 3.3V single-supply operation (1.8V/3.3V rails per the verified FindIC specification) simplifies power tree design in battery-powered and line-powered systems alike. Flash acceleration logic allows the 64 MHz core to execute from flash with minimal wait states. Typical applications include industrial control and automation nodes, consumer appliances with user interfaces, building control panels, and data-logging equipment where 512KB of self-programmable flash and low power consumption extend battery life. When designing with this MCU, budget the flash wait states at full 64 MHz operation and verify the power-supply decoupling on all VDDIO/VDDCORE pins per the manufacturer datasheet layout guidance; dual-bank firmware update schemes must reserve adequate flash headroom in the active bank. This page synthesizes distributor pricing, drop-in alternatives, parametric comparison, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-19.

見積もり お問い合わせ
ATSAM3SD8CA-CU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-CU

ATSAM3SD8CA-CU - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8CA-CU is a 32-bit ARM Cortex-M3 microcontroller in the SAM3S series, running at up to 64 MHz with 512 KB embedded Flash and 64 KB SRAM, housed in a 100-ball TFBGA (9x9 mm, 0.8 mm pitch) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the heart of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. The ARM Cortex-M3 is a 32-bit RISC processor core designed for cost-sensitive, deterministic real-time embedded applications, and the SAM3S family wraps this core with a rich peripheral set and low-power modes. Key features of the ATSAM3SD8CA-CU include the 64 MHz Cortex-M3 core with Thumb-2 instruction set, 512 KB (512K x 8) Flash program memory supporting in-system programming, 64 KB SRAM, and a supply voltage range of 1.62 V to 3.6 V. The device integrates USB, USART, SPI, and TWI communication peripherals along with a 12-bit ADC, timers, PWM channels, and multiple low-power sleep and wait modes for energy-sensitive designs. Technically, the SAM3S series uses a multi-layer AHB bus matrix that allows the CPU, DMA controller (Peripheral DMA), and USB to access memory and peripherals concurrently, reducing latency. The Flash Access Zone concept and prefetch buffer sustain zero-wait-state execution at moderate clock frequencies, while the nested vectored interrupt controller (NVIC) provides deterministic interrupt handling. Typical applications include industrial control and automation nodes, consumer and portable devices with USB connectivity, metering and sensing systems, and motor control or HVAC interfaces where the DMA-driven peripherals offload the CPU. When designing with this part, budget GPIO carefully: the 100-ball TFBGA requires fine-pitch (0.8 mm) PCB layout with via-in-pad or dog-bone fanout, and the 1.62-3.6 V supply demands a clean, decoupled 3.3 V rail for stable Flash operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3SD8CA-CUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3SD8CA-CUR

ATSAM3SD8CA-CUR - 64MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3SD8CA-CUR is a 32-bit ARM Cortex-M3 microcontroller running at 64 MHz with 512 KB of embedded FLASH program memory and 64 KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and a rich set of peripherals on one die. Within the semiconductor hierarchy, the ATSAM3SD8CA-CUR belongs to the SAM3S family of flash-based MCUs under the ARM Cortex-M embedded processor class, positioned for general-purpose embedded control where a full operating system is not required. Its flash-based program storage allows field firmware updates, while on-chip SRAM holds run-time data and stacks. Key features include 79 general-purpose I/O lines, a wide 1.62V to 3.6V operating supply range, and industrial-grade operation from -40C to +85C. Connectivity peripherals cover EBI/EMI external bus, I2C (TWI), IrDA, a memory card interface, SPI, SSC (synchronous serial controller), UART/USART, and full-speed USB, enabling flexible system expansion. The device also integrates 10-bit and 12-bit ADC converters plus a 12-bit DAC, an internal oscillator, and is pin-to-pin compatible with AT91SAM7S legacy products (64-pin versions) and SAM3S4/2/1 family members. Technically, the ARM Cortex-M3 core provides a 3-stage pipeline, Thumb-2 instruction set, and a nested vectored interrupt controller for deterministic interrupt latency. The embedded flash controller supports wait-state tuning for reliable 64 MHz execution, and the multiple serial controllers offload communication tasks from the CPU. Typical applications include industrial automation nodes, consumer electronics, and medical devices, where the combination of USB connectivity, precision analog, and small 9x9 mm BGA footprint fits space-constrained designs. When designing with this device, verify that the 1.62V-3.6V supply rail and the 100-TFBGA ball layout match your PCB fabrication capabilities, since fine-pitch BGA assembly requires appropriate process control. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3U1CA-AU - 96MHz Cortex-M3, 64KB Flash MCU | Microchip
ATSAM3U1CA-AU

ATSAM3U1CA-AU - 96MHz Cortex-M3, 64KB Flash MCU | Microchip

The Microchip Technology (Atmel) ATSAM3U1CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at 96 MHz with 64 KB of embedded flash, 20 KB of SRAM, and a high-speed USB device port with an integrated transceiver, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripheral controllers on one die. Within the embedded-systems hierarchy, the SAM3U family sits in the ARM Cortex-M class of 32-bit microcontrollers, which are widely used where deterministic real-time behavior, low power, and rich serial connectivity are required, sitting above 8-bit MCUs and below application processors. Key differentiating features include the ARM Cortex-M3 revision 2.0 core executing the Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust task isolation, and embedded flash organized 128-bit wide to sustain zero-wait-state execution at full core speed. The integrated high-speed USB transceiver is the headline feature, enabling fast up/downloading of data with robust EMI tolerance and plug-and-play high-speed serial connectivity without an external PHY. Architecturally, the SAM3U is built around a multi-layer bus matrix with multiple SRAM banks, supported by a Peripheral DMA Controller (PDC) and DMA channels. This parallel data-path design sustains high-speed USB throughput while the CPU services other peripherals, minimizing bus contention during bulk data transfers. Operation spans a 1.62V to 3.6V supply range. Typical applications include USB data-logging instruments, industrial gateways and field tools, and consumer devices requiring fast USB mass-storage or firmware update paths, where the 96 MHz core and 64 KB flash cover the code and throughput budget of mid-complexity embedded designs. When designing with this part, budget flash carefully: 64 KB is generous for bare-metal firmware but tight for USB stacks with file systems, so consider the pin-compatible 128 KB (ATSAM3U2CA-AU) or 256 KB (ATSAM3U4CA-AU) siblings for growth headroom. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-19.

見積もり お問い合わせ
ATSAM3U1CA-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip
ATSAM3U1CA-CU

ATSAM3U1CA-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip

The Microchip Technology ATSAM3U1CA-CU (Atmel SAM3U series) is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 96 MHz, with 64 KB of embedded flash memory, 20 KB of SRAM, and an integrated high-speed USB device transceiver, housed in a 100-ball TFBGA (9 x 9 mm) package. A microcontroller (MCU) is a complete computing system on a single chip, integrating a processor core, program memory, data memory, and peripherals. The ATSAM3U1CA-CU belongs to the ARM Cortex-M3 family of 32-bit embedded processors, positioned within the broader hierarchy of microprocessors and system-on-chip (SoC) devices for power-management and embedded control applications. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU) and Thumb-2 instruction set, high-speed USB connectivity with an integrated transceiver for fast data up/downloading, robust EMI tolerance, and plug-and-play high-speed serial communication. The 128-bit-wide flash access improves instruction fetch efficiency, and the device operates from a 1.62 V to 3.6 V single supply. The SAM3U architecture emphasizes USB data throughput: the embedded high-speed USB device port (480 Mbps capable transceiver) offloads data transfers from the CPU, while DMA channels move data between peripherals and memory without core intervention. This makes the device well suited to bridge USB host systems with data-acquisition, storage, and communication peripherals. Typical applications include USB data loggers and high-speed data acquisition systems, industrial communication gateways, embedded control panels, and consumer devices requiring fast USB file transfer with robust EMI performance. Designers should note the 64 KB flash and 20 KB SRAM capacity limits when sizing applications; the pin-compatible ATSAM3U2CA-CU and ATSAM3U4CA-CU in the same 100-TFBGA package offer 128 KB and 256 KB flash respectively, providing an upgrade path without PCB changes. This page synthesizes distributor inventory, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3U1CB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip
ATSAM3U1CB-CU

ATSAM3U1CB-CU - 96MHz Cortex-M3 MCU 64KB Flash | Microchip

The Microchip Technology ATSAM3U1CB-CU is a 32-bit ARM Cortex-M3 flash microcontroller operating at up to 96 MHz, with 64 KB of embedded flash memory, 20 KB of SRAM, and a 100-ball TFBGA (9x9 mm) package. It runs from a 1.62 V to 3.6 V supply over an industrial -40 C to +85 C temperature range and provides up to 57 I/O lines. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, nonvolatile flash memory for program storage, SRAM for data, and a rich set of peripherals on one die. Within the power-management hierarchy of embedded systems, an MCU sits at the application layer, coordinating sensors, communication interfaces, and actuators, and the SAM3U family belongs to the wider ARM Cortex-M class of 32-bit MCUs used across industrial and consumer electronics. Key features include the Cortex-M3 revision 2.0 core with Thumb-2 instruction set and a Memory Protection Unit (MPU), a 128-bit-wide flash access interface with memory accelerator for deterministic execution at 96 MHz, and integrated 10-bit and 12-bit ADCs for precision analog acquisition. The SAM3U family uniquely integrates a high-speed USB device port, making it attractive for data-acquisition endpoints. Architecturally, the flash memory uses a dual-bank structure with a memory accelerator that prefetches instructions to sustain zero-wait-state performance from the fast 128-bit bus, while the MPU supports safety-oriented software partitioning typical of Cortex-M3 designs. Typical applications include USB data-logger and bridge devices, industrial sensing nodes exploiting the 12-bit ADC, and portable instruments where the compact 9x9 mm TFBGA conserves board area. When designing with this part, budget the 64 KB flash carefully; if firmware grows, pin-compatible SAM3U family members with larger flash are available. Decouple each VDD ball with 100 nF ceramics placed close to the package. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control
ATSAM3U1EA-AU

ATSAM3U1EA-AU - 96MHz Cortex-M3 MCU | Microchip | Industrial Control

The Microchip ATSAM3U1EA-AU is a 32-bit ARM Cortex-M3 microcontroller operating up to 96 MHz, with 64 KB of embedded Flash and 20 KB of SRAM, in a 144-LQFP 20 x 20 mm package. It belongs to the SAM3U family of embedded Flash microcontrollers and targets industrial automation, consumer electronics, and connected embedded products. What is a 32-bit ARM Cortex-M3 microcontroller? It is an embedded processor family based on the ARM Cortex-M3 RISC core, combining deterministic control processing, Flash program memory, SRAM, and peripherals on one integrated device. In the system hierarchy, it is an MCU, an embedded-control semiconductor, and a member of the wider semiconductor and industrial-control component categories. Its 96 MHz maximum operating speed provides headroom for protocol handling, control loops, and moderate real-time workloads. The verified device data identifies a 64 KB 64K x 8 Flash configuration, 20 KB SRAM, single-core operation, and a 144-LQFP package. The SAM3U family is documented with a Cortex-M3 revision 2.0 core, Memory Protection Unit support, and the Thumb-2 instruction set. These features make the device useful where a compact, single-chip control solution is preferred over a separate processor, memory, and peripheral arrangement. The ATSAM3U1EA-AU can serve as the central controller in industrial automation, communication-enabled embedded equipment, consumer devices, and medical-device control modules. Its 1.62 V to 3.6 V operating-supply range, reported in the verified Microchip USA listing, is suitable for low-voltage embedded systems. The 144-pin LQFP package also exposes a broad set of I/O and peripheral connections for external sensors, actuators, memory, and communication interfaces. Designers should verify the exact peripheral allocation, pin multiplexing, electrical limits, clock configuration, and programming requirements against the official Atmel datasheet before layout release. The LQFP footprint and 96-pin package body require careful fanout planning, adequate power decoupling, and thermal review. Firmware support should also be selected for the SAM3U device and the chosen development toolchain. This product summary combines verified distributor and manufacturer-linked information with practical sourcing and design context. It is intended to help engineers identify the correct MCU, locate the datasheet, assess package fit, and move to a controlled hardware and firmware validation process.

見積もり お問い合わせ
ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU
ATSAM3U1EA-CU

ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU

The Microchip Technology ATSAM3U1EA-CU is a 32-bit ARM Cortex-M3 microcontroller operating at up to 96 MHz, with 64 KB of embedded Flash and 20 KB of SRAM, housed in a 144-BGA (13x13) surface-mount package. It belongs to the SAM3U family and is designed for embedded applications requiring USB, memory-card, serial, analog, timing, and communications peripherals. The device also supports a 1.62 V to 3.6 V supply range and an industrial temperature range of -40°C to +85°C. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAM3U1EA-CU follows the hierarchy ARM Cortex-M3 core → 32-bit RISC microcontroller → embedded microcontroller → semiconductor. Its compact BGA package supports dense PCB layouts, while the 96 MHz operating speed provides a practical balance between processing performance, power consumption, and design complexity for control-oriented embedded systems. Key features include a 96 MHz ARM Cortex-M3 processor, 64 KB Flash, 20 KB SRAM, DMA, PWM, watchdog timer, I2S, and high-speed USB device support with an embedded transceiver. The verified component description also identifies high-speed MCI support for SDIO, SD, and MMC interfaces, along with two 10-bit and two 12-bit ADC groups. These peripherals reduce the need for external interface devices and make the MCU suitable for connected industrial, communications, and data-acquisition equipment. The SAM3U architecture combines a 32-bit RISC processor with dedicated hardware peripherals for data movement and real-time control. DMA improves peripheral throughput by transferring data with less CPU intervention, while PWM and watchdog functions support deterministic timing and system monitoring. The 144-BGA package exposes the high peripheral count in a compact 13 mm by 13 mm footprint, but BGA layout requires careful escape routing, thermal-via planning, and assembly inspection. Typical applications include USB-connected control systems, industrial data loggers, SD-card or MMC data storage, motor and power-control platforms, audio interfaces using I2S, and embedded communications equipment. The 64 KB Flash capacity is appropriate for firmware that integrates control logic, USB firmware, and peripheral drivers without requiring an external memory device. Design consideration: the 144-BGA package and 1.62 V to 3.6 V supply range require careful decoupling, controlled-layout routing, and validation of signal integrity at the 96 MHz operating speed. Confirm pin assignments and BGA escape-routing requirements against the manufacturer datasheet before releasing a PCB design. This page consolidates the verified distributor specifications, practical application guidance, and replacement considerations for ATSAM3U1EA-CU, while clearly separating unavailable data from confirmed manufacturer information.

見積もり お問い合わせ