マイクロコントローラ

製品 (18756)

PIC24FJ16GA004T-I/PT - 16KB Flash 16-bit MCU | Microchip
PIC24FJ16GA004T-I/PT

PIC24FJ16GA004T-I/PT - 16KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ16GA004T-I/PT is a 16-bit PIC24F microcontroller with 16 KB Flash program memory and 4 KB RAM, running up to 16 MIPS at 32 MHz CPU clock in a 44-pin TQFP (10x10 mm) package. The device integrates an 8 MHz internal oscillator with 4x PLL, a 17-bit single-cycle hardware multiplier, a 16-bit hardware divider, and a 16-bit working register array across a modified Harvard architecture. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die. The PIC24F family sits in the 16-bit segment of the Microchip PIC portfolio, positioned between the 8-bit PIC16/PIC18 and the 32-bit PIC32MX. It uses a modified Harvard architecture with separate program and data buses, optimized for deterministic interrupt response and C-compiler efficiency. Within that hierarchy, the PIC24FJ16GA004T-I/PT is the 16 KB Flash, 44-pin variant of the GA004 family. Key differentiating features include 35 general-purpose I/O pins, multiple analog and digital peripherals, the 4x PLL that lets the internal 8 MHz oscillator reach the full 32 MHz instruction rate, and C compiler optimization support that allows efficient use of the MPLAB XC16 toolchain. The 17-bit by 17-bit single-cycle multiplier accelerates DSP-class math. Technical depth: the part uses a 5.5K x 24-bit Flash organization that gives a true 16 KB of linear instruction space, while 4 KB of RAM is split between general-purpose SRAM and the system stack. Hardware multiply/divide is single-cycle, and the 32 MHz core delivers 16 MIPS. A peripheral pin select (PPS) function allows many digital peripherals to be remapped to a wide choice of I/O pins, simplifying board layout. Typical applications include industrial control panels, automotive body and HVAC modules (note: automotive grade requires special ordering codes per the Microchip product page), USB device or human-interface nodes using the on-chip USB transceiver on related GA004 family members, and low-cost general-purpose 16-bit embedded platforms. The automotive recommendation from Microchip makes it a candidate for non-safety in-cabin modules. When designing with this MCU, ensure the JTAG/ICD interface is brought to a header for MPLAB ICD programming and debugging, and respect the 3.0 V to 3.6 V Vdd range. Pin-compatible migration paths exist within the PIC24FJ64GA004 family for users who later need more code space. This page synthesizes distributor stock and pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24FJ16MC101-E/P - 16-bit 16 MIPS 16KB Flash MCU | Microchip
PIC24FJ16MC101-E/P

PIC24FJ16MC101-E/P - 16-bit 16 MIPS 16KB Flash MCU | Microchip

The Microchip Technology PIC24FJ16MC101-E/P is a 16-bit microcontroller from the PIC24F family designed for ultra-low-cost, high-performance motor control applications. It integrates a 16 MIPS PIC core, 16 KB of Flash program memory (5.5K x 24), and 1 KB of RAM in a 20-pin PDIP through-hole package, and is AEC-Q100 qualified for automotive use. The device operates from a 3.0V to 3.6V supply at up to 32 MHz system clock and includes a 4-channel 10-bit Analog-to-Digital Converter for feedback sensing. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces (ADC, timers, communication ports) into one IC. A 16-bit MCU uses a 16-bit-wide data path and instruction word, providing a balance between the simplicity of 8-bit cores and the computational throughput of 32-bit cores; in the broader taxonomy it sits between low-end 8-bit MCUs (e.g., PIC16) and high-performance 32-bit MCUs (e.g., PIC32, Cortex-M). The PIC24F family targets low-power, signal-processing, and motor-control applications at low pin counts. Key features include 4 channels of 10-bit ADC, up to 5 PWM outputs, a Charge Time Measurement Unit (CTMU) for capacitive touch or simple sensing, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, and on-chip 32 kHz low-power oscillator support. The PIC24F core uses a modified Harvard architecture with a 16-bit data path and 24-bit instructions, delivering deterministic interrupt latency and efficient C-compiler code density. Typical applications include single-phase and 3-phase BLDC/PMSM motor control (sensorless and sensored), fan and pump controllers, small appliance drives, automotive body electronics, HVAC blower control, and low-cost LED lighting controllers. The combination of dedicated motor-control peripherals (MCPWM, ADC triggering) and small-form-factor 20-pin PDIP makes it ideal for compact, high-volume motor-drive modules. When designing with this device, ensure that the supply decoupling network uses a 10 uF bulk capacitor plus a 0.1 uF ceramic close to the VDD pin, and route the analog AVSS/AVDD pair separately from noisy digital rails. The PPS feature lets the same firmware be reused across board variants with different pin assignments, but PPS lock must be cleared in software before reprogramming. For thermal and reliability in automotive under-hood environments, derate the I/O current below 70% of the absolute maximum and follow AEC-Q100 PCB layout guidelines. This page synthesizes distributor pricing, drop-in compatible same-package alternatives (PIC24FJ16MC101-I/P, PIC24FJ16MC101-E/SO variants), and practical design notes not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24FJ16MC101-I/P - 16-bit MCU, 16KB Flash, 20-PDIP | Microchip
PIC24FJ16MC101-I/P

PIC24FJ16MC101-I/P - 16-bit MCU, 16KB Flash, 20-PDIP | Microchip

The Microchip Technology PIC24FJ16MC101-I/P is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS core performance with 16 KB of Flash program memory and 1 KB of RAM in a 20-pin PDIP through-hole package. It operates from 3.0 V to 5.5 V, integrates CTMU, MCPWM, and PPS peripherals, and is targeted at cost-sensitive brushed-DC and BLDC motor control as well as general-purpose embedded designs. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and programmable I/O peripherals. The 16-bit class bridges 8-bit parts (PIC16, AVR) and 32-bit Cortex-M devices, offering a better MIPS-per-mA and richer DSP math than 8-bit MCUs while staying cheaper and easier than 32-bit ARM. Within this hierarchy, the PIC24F family sits in Microchip's "low-power 16-bit" tier, with the MC subset adding dedicated motor-control peripherals. Key features include up to 16 MIPS at 32 MHz CPU clock, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, six enhanced PWM channels with dedicated fault inputs, Peripheral Pin Select (PPS) for flexible remapping of digital peripherals, a 10-bit ADC up to 500 ksps with up to 9 channels, two UART/I2C/SPI modules, and five 16-bit timers. The 20-pin PDIP package offers generous creepage and is breadboard-friendly for prototypes and educational use. The PIC24FJ16MC101 uses a modified Harvard architecture with a 16-bit wide data path, hardware multiply, and a C-friendly instruction set optimized for the MPLAB XC16 compiler. Its 16 MIPS throughput enables deterministic field-oriented control loops for small three-phase BLDC and stepper motors, while CTMU enables cap-touch user interfaces on the same chip. Typical applications include small DC and BLDC motor drives for fans, pumps, appliances, drones, and toys; capacitive touch user interfaces; sensor nodes; and low-cost industrial control. The wide 3.0-5.5 V supply range simplifies integration with 3.3 V sensors or legacy 5 V logic. When designing with this device, ensure the Vcap pin receives the 10 uF/470 nF decoupling pair required by the internal voltage regulator. Use PPS to route peripherals to convenient pins and verify that no analog pins are reused as digital outputs inadvertently. The 20-pin PDIP eliminates reflow constraints but limits high-speed signal integrity at >10 MHz. This page synthesizes distributor pricing, same-family drop-in alternatives, and design notes not found in the manufacturer datasheet alone, giving engineers a complete BOM-ready reference.

見積もり お問い合わせ
PIC24FJ16MC101-I/SO - 16-bit MCU, 16KB Flash, 20-SOIC Motor Control
PIC24FJ16MC101-I/SO

PIC24FJ16MC101-I/SO - 16-bit MCU, 16KB Flash, 20-SOIC Motor Control

The Microchip Technology PIC24FJ16MC101-I/SO is a low-cost, high-performance 16-bit microcontroller in the PIC24F family tailored for motor control. The device executes up to 16 MIPS at 32 MHz, integrates 16 KB of Flash program memory (5.5K x 24 words), 1 KB of RAM, and is housed in a 20-pin SOIC (0.295" / 7.50 mm body width) package. According to the manufacturer datasheet (DS30009997), it is part of an ultra-low-cost 16-bit motor-control family featuring MCPWM peripherals, PPS, CTMU, and a 16-bit working register array with single-cycle hardware multiplier. A 16-bit microcontroller (MCU) is a programmable processor that uses a 16-bit data path, instruction word, and address space, occupying the middle ground between 8-bit controllers and 32-bit Cortex-M parts. Within the broader taxonomy, MCUs sit at the bottom of the microcontroller hierarchy: PIC24F -> 16-bit MCU -> RISC microcontroller -> embedded processor -> semiconductor. The PIC24FJ16MC101 sits in the motor-control sub-family, optimized for BLDC, PMSM, and brushed/voice-coil applications by integrating high-resolution PWMs, quadrature encoder interfaces, and CTMU for capacitive-touch or current sensing. Key features include a 17-bit single-cycle hardware multiplier by 16-bit hardware divider, C-compiler optimized instruction set, peripheral pin select (PPS) for flexible I/O routing, charge time measurement unit (CTMU), and multiple clock options including an 8 MHz internal oscillator with 4x PLL. The device also offers a modified Harvard architecture with separate program and data buses, providing deterministic interrupt response essential for closed-loop motor control. Typical applications include sensorless BLDC motor drives, drone ESC controllers, small appliance motor control, ceiling fan controllers, and low-cost industrial pumps. The wide operating voltage range (typically 3.0V to 3.6V) and industrial -40C to +85C temperature range support industrial-grade environments. When designing with this device, ensure decoupling capacitors are placed close to VDD/AVDD pins and that high-speed traces are kept short to avoid coupling noise into analog sections. PPS allows remapping of peripherals to different I/O pins, simplifying board layout. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a one-stop reference for selecting and sourcing the PIC24FJ16MC101-I/SO.

見積もり お問い合わせ
PIC24FJ16MC101-I/SS - 16 MIPS 16KB Flash Motor Control MCU | Microchip
PIC24FJ16MC101-I/SS

PIC24FJ16MC101-I/SS - 16 MIPS 16KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ16MC101-I/SS is a 16-bit motor-control microcontroller from the PIC24FJMC family, delivering up to 16 MIPS CPU performance from 16 KB of Flash program memory and 1 KB of SRAM, in a 20-pin SSOP package. It targets cost-sensitive brushless DC (BLDC), permanent-magnet synchronous motor (PMSM), and switched-reluctance drive applications where board area is at a premium. The industrial temperature variant ("-I") supports -40C to +85C operation, and the SSOP-208 ("/SS") suffix designates a 20-lead Shrink Small Outline Package supplied in tube. What is a motor-control MCU? A motor-control microcontroller is a specialized MCU that integrates both a general-purpose CPU and dedicated motor-control peripherals such as high-resolution Pulse-Width Modulators (PWMs), Motor Control PWMs (MCPWMs), analog comparators with DAC references, operational amplifiers for current sensing, and peripherals like the Charge Time Measurement Unit (CTMU) for touch and sensor feedback. Motor-control MCUs sit inside the broader taxonomy of embedded microcontrollers, then microcontrollers, then microprocessors and SoCs, and ultimately fall under the Integrated Circuits > Microcontrollers category. The PIC24FJ16MC101 belongs to the PIC24F family, which uses a 16-bit modified Harvard architecture with separate program and data buses. Key features include up to 16 MIPS throughput at 32 MHz, three 16-bit MCPWM channels with complementary outputs and programmable dead time, three 16-bit timers, a 10/12-bit ADC with up to 9 channels, two comparators with 10-bit DAC references, two op amps for in-line current sensing, an integrated CTMU, and Peripheral Pin Select (PPS) that remaps most digital I/O to nearly any pin. The device operates from 3.0 V to 5.5 V, supports 16 MIPS at 3.3 V, and includes a 10-bit ADC with 500 ksps conversion rate, dual comparators, and a 5-bit DAC for programmable threshold generation. The PIC24FJ16MC101 architecture pairs a 16-bit CPU with a flexible peripheral set, eliminating external gate-driver logic and reducing PCB area. PPS enables late-stage pin assignment changes, which shortens hardware iterations. The device also integrates I2C, SPI, and UART interfaces for sensor and host communication, plus a Charge Time Measurement Unit (CTMU) that supports capacitive touch sensing and precise time-of-flight measurements. Typical applications include sensorless BLDC ceiling fans, low-voltage cordless power tools, small drone ESCs (electronic speed controllers), appliance pumps and valves, and cost-optimized industrial pumps. The combination of MCPWM, op amps, and comparators on a single die eliminates the need for an external analog front-end in many 3-phase or 1-phase motor designs. When designing with this part, populate both AVSS and AGND nets separately to the ground plane and place the Vcap decoupling capacitor within 5 mm of the dedicated Vcap pin. Programming is supported by Microchip's MPLAB X IDE and the MPLAB XC16 compiler; designers should use the MPLAB Code Configurator to initialize PPS and MCPWM modules. This page synthesizes distributor pricing, drop-in alternative MCUs, application pairings, and practical design notes that go beyond the bare datasheet.

見積もり お問い合わせ
PIC24FJ16MC101T-I/SS - 16-Bit MCU, 16 MIPS, 16KB Flash, 20-SSOP | Microchip
PIC24FJ16MC101T-I/SS

PIC24FJ16MC101T-I/SS - 16-Bit MCU, 16 MIPS, 16KB Flash, 20-SSOP | Microchip

The Microchip PIC24FJ16MC101T-I/SS is a 16-bit PIC microcontroller from the PIC24FJ16MC motor-control family, delivering 16 MIPS performance at a 32 MHz maximum CPU clock and packaged in a 20-pin SSOP (5.3 mm body, 0.65 mm pitch). It integrates 16 KB (5.5K x 24) of Flash program memory and 1 KB of SRAM, with the tape-and-reel 'T' suffix indicating shipping orientation for high-volume SMT assembly. The 'I/SS' suffix denotes the industrial temperature grade (-40C to +85C) in an SSOP package, and the device is built on Microchip's CMOS 16-bit modified-Harvard core optimized for low-cost motor control designs. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory (typically Flash), volatile working memory (RAM), and a set of on-chip peripherals such as timers, ADCs, communication controllers, and I/O ports. Within the broader taxonomy of embedded semiconductors, the PIC24FJ16MC101 sits at the 16-bit MCU tier - above 8-bit MCUs (PIC10/12/16) in computational throughput but below 32-bit MCUs (PIC32) in addressing range and DSP capability. This particular family is specialized for motor-control applications, integrating motor-control PWMs (MCPWM), a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing. Key differentiating features include the integrated MCPWM module with dedicated dead-time control, a 10-bit ADC with multiple conversion trigger sources, and PPS allowing most digital functions to be remapped to a wide range of I/O pins. The CTMU enables capacitive-touch sensing and precise time measurement, eliminating external timing components. Together these peripherals shrink the external bill of materials for sensorless BLDC, brushed DC, and stepper motor designs. Architecturally, the PIC24FJ core uses a 16-bit modified-Harvard design with separate program and data paths, hardware MAC for DSP-style operations, and a wide 24-bit instruction word. The 'FJ' suffix indicates Flash-based program memory with self-programmability in the field, supporting on-chip EEPROM emulation and ICSP (In-Circuit Serial Programming). Operating voltage is 2.0 V to 3.6 V, suitable for battery-powered and 3.3 V-rail designs. Typical applications include BLDC and brushed-DC motor control in small appliances and fans, sensorless and sensored trapezoidal commutation, low-cost field-oriented control (FOC) reference designs, LED drivers with analog-mixed-signal control, and IoT edge nodes requiring PWM control plus communication. The CTMU also enables user-interface designs with capacitive touch buttons. Industrial designers value the part for its compact 20-pin footprint, reducing PCB area for space-constrained motor-control boards. Designers should review Microchip application notes on MCPWM configuration, CTMU calibration, and PPS remapping before PCB layout. The SSOP-20 footprint allows migration to larger pin-count PIC24FJ variants without board rework when more I/O is needed later. Always enable the watchdog timer and use the configurable brown-out reset for robust field deployment.

見積もり お問い合わせ
PIC24FJ16MC102-E/ML - 16-bit Motor Control MCU, 16KB Flash | Microchip
PIC24FJ16MC102-E/ML

PIC24FJ16MC102-E/ML - 16-bit Motor Control MCU, 16KB Flash | Microchip

The Microchip Technology PIC24FJ16MC102-E/ML is a 16-bit microcontroller from the PIC® 24F family optimized for ultra-low-cost, high-performance motor control, featuring 16 KB of Flash program memory (5.5K x 24), 1 KB of RAM, and 16 MIPS execution throughput at 32 MHz, housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad. It integrates dedicated motor-control peripherals including MCPWM (Motor Control PWM), a CTMU (Charge Time Measurement Unit) for capacitive touch and accurate time measurement, PPS (Peripheral Pin Select) for flexible I/O routing, and a 16-bit timer/capture/compare array. Operating from 3.0 V to 3.6 V with industrial-grade -40°C to +125°C temperature range, it targets space-constrained BLDC, PMSM, and stepper motor drives where small footprint and low BOM cost dominate the design envelope. A 16-bit microcontroller (MCU) is a programmable logic device that uses a 16-bit data path, registers, and ALU, providing roughly an order-of-magnitude more arithmetic precision than 8-bit MCUs while keeping code-density advantages over 32-bit parts. Motor-control MCUs add PWM, ADC, and quadrature-encoder peripherals tuned for closed-loop commutation. The PIC24FJ16MC102 belongs to the broader taxonomy: PIC24F -> 16-bit microcontroller -> MCU -> microcontroller -> embedded processor -> semiconductor, and is part of Microchip's motor-control focused 'MC' subfamily. Key differentiating features include 6 PWM channels with dedicated fault inputs, 10-bit ADC with 500 ksps throughput, up to 21 configurable I/O via PPS, and CIP (Core Independent Peripherals) that offload timing-critical tasks from the CPU. The MCPWM module supports center-aligned, edge-aligned, and complementary PWM modes critical for three-phase inverter control, while the integrated op-amp option (on MC101/102 variants) simplifies current-sense conditioning without external components. Architecturally, the device uses a modified Harvard architecture with separate program and data buses for deterministic 16 MIPS throughput, a hardware multiply/divide unit, and a 16x16-bit working register array. The 16 KB Flash supports self-programming under firmware control, enabling field-upgradeable motor firmware. Built-in ECC and brown-out reset enhance reliability in harsh electrical environments typical of motor drive stages. Typical applications include low-voltage brushless DC (BLDC) fan and pump controllers, RC servo drivers, e-bike and small drone ESCs, appliance motor control (washers, mixers, refrigerator compressors), and consumer robotic motion subsystems. The combination of low cost, tiny 6x6 mm QFN, and AEC-Q100 automotive qualification (per Hotenda listing) extends usability into automotive body electronics such as HVAC blowers and seat-adjustment motors. When designing with this part, allocate PCB thermal copper under the exposed pad and ensure the ADC sample window exceeds 1 µs for accurate current sensing. Use Microchip's MPLAB X IDE with XC16 compiler and motorBench™ development suite to accelerate FOC algorithm deployment. This page synthesizes distributor pricing, AEC-Q100 qualified variants, drop-in QFN-28 alternatives, and practical PCB/design notes not found in the bare manufacturer datasheet.

見積もり お問い合わせ
PIC24FJ16MC102-I/ML - 16-bit 16 MIPS 16KB Flash Motor Control MCU | Microchip
PIC24FJ16MC102-I/ML

PIC24FJ16MC102-I/ML - 16-bit 16 MIPS 16KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ16MC102-I/ML is a 16-bit PIC24F microcontroller in a 28-pin QFN (6x6 mm) package designed for ultra-low-cost, high-performance motor control. It integrates a 16 MIPS dsPIC30/dsPIC33-style CPU core with 16 KB of Flash program memory (5.5K x 24 words) and 1 KB of SRAM, alongside dedicated motor-control peripherals including MCPWM (Motor Control PWM), a CTMU (Charge Time Measurement Unit), and Peripheral Pin Select (PPS) for flexible I/O mapping. According to Microchip datasheet DS30009997E, the device operates across 3.0 V to 5.5 V with an industrial -40 C to +85 C temperature range. A 16-bit microcontroller (MCU) is a single-chip processor with a 16-bit data path that delivers higher arithmetic precision and code density than 8-bit devices while keeping cost, power, and complexity lower than 32-bit ARM Cortex-M parts. Within the broader PIC24F family, motor-control derivatives such as the PIC24FJ16MC102 add PWM, ADC triggering, and fault inputs so a single chip can drive a three-phase BLDC or PMSM motor. In a typical system hierarchy this device sits below the application layer and above the power stage, coordinating gate drivers, current sense amplifiers, and position feedback. Key features include 6 channels of 10-bit ADC with selectable conversion triggers, up to 6 PWM channels with complementary or independent output modes, multiple 16-bit timers, a Real-Time Clock/Calendar, and an integrated UART/SPI/I2C serial engine. PPS allows most digital peripherals to be reassigned to almost any I/O pin, simplifying PCB routing on dense motor-control boards. The PIC architecture combines a modified Harvard CPU with a 24-bit instruction word and 16-bit data path, delivering deterministic interrupt latency and single-cycle MAC operations that simplify digital filter code for sensorless control loops. The CTMU enables precise time-of-flight measurement for capacitive touch or temperature sensing using only an external resistor. Typical applications include BLDC/PMSM fan and pump controllers, low-voltage hobby servos, sensorless trapezoidal drives, small appliance motor boards, and low-cost position-control systems. The 28-QFN footprint is also well suited to space-constrained IoT nodes that still need deterministic real-time behavior. When designing with this part, place a 10 uF plus 0.1 uF decoupling pair on each VDD pin and keep the analog AVdd trace short and quiet to preserve ADC accuracy. The PPS remapping registers must be unlocked and configured after each POR - a common pitfall when porting firmware between PIC24F variants.

見積もり お問い合わせ
PIC24FJ16MC102-I/SS - 16-bit 16KB Flash MCU, 28-SSOP | Microchip
PIC24FJ16MC102-I/SS

PIC24FJ16MC102-I/SS - 16-bit 16KB Flash MCU, 28-SSOP | Microchip

The Microchip Technology PIC24FJ16MC102-I/SS is a 16-bit microcontroller from the PIC24F motor-control family, integrating 16 KB (5.5K x 24) of Flash program memory, 1 KB of RAM, and dedicated motor-control peripherals in a 28-pin SSOP package. It executes instructions at 16 MIPS from a 32 MHz internal oscillator and operates across a 3.0 V to 3.6 V supply range, making it well suited for low-cost, space-constrained motor-drive and digital-power designs. A 16-bit microcontroller (MCU) is a microprocessor core that processes data in 16-bit chunks, offering a balance between 8-bit efficiency and 32-bit performance for embedded applications. Within the broader taxonomy, the PIC24FJ belongs to: 16-bit MCU -> PIC24F family -> PIC24FJ MC (motor control) sub-family -> Flash microcontroller -> embedded controller -> semiconductor. The 'FJ' suffix indicates a Flash-based, low-power variant, while the 'MC' marker designates motor-control-targeted peripherals. The 'I/SS' suffix specifies the industrial temperature grade (-40C to +85C) and 28-pin SSOP (Shrink Small Outline Package) form factor. Key features include three 16-bit timers plus one 32-bit timer, a 6-channel 10-bit ADC, up to 21 general-purpose I/O pins with 5 V tolerance on selected pins, and dedicated Motor Control PWM (MCPWM) outputs. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to physical pins, simplifying PCB layout. The device also provides an RTCC, two UART/SPI/I2C capable Enhanced UARTS, and on-chip 32 kHz low-power oscillator support. Architecturally, the PIC24FJ16MC102 uses a modified Harvard CPU core with a 16-bit data path and 24-bit instructions, achieving deterministic interrupt latency that is critical for motor-control loops. The integrated CTMU (Charge Time Measurement Unit) enables touch, proximity, and time-of-flight measurements without external analog front ends. Typical applications include BLDC and PMSM motor controllers, sensorless fan control, small appliance drives (pumps, mixers), LED lighting drivers with dimming, and low-end digital power conversion such as small DC-DC converters and PFC stages. When designing with this MCU, ensure proper decoupling (100 nF plus 10 uF bulk) near VDD/VSS, follow Microchip AN1078 for sensorless BLDC firmware, and budget for programming/debug via the 2-wire PGECx/PGEDx ICSP interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FJ16MC102-I/SS that are not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24FJ16MC102T-I/ML - 16-bit 16 MIPS 16KB Flash Motor MCU | Microchip
PIC24FJ16MC102T-I/ML

PIC24FJ16MC102T-I/ML - 16-bit 16 MIPS 16KB Flash Motor MCU | Microchip

The Microchip Technology PIC24FJ16MC102T-I/ML is a 16-bit RISC PIC24F motor-control microcontroller with 16 KB Flash, 1 KB RAM, and a 16 MIPS CPU core, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It is part of the PIC24FJ16MC101/102 family optimized for low-cost, low-pin-count motor control with integrated peripherals for single-chip BLDC, PMSM, and stepper drive stages. The 'T' suffix denotes tape-and-reel packaging, and the 'I' suffix denotes the -40C to +85C industrial operating temperature range. A 16-bit microcontroller (MCU) is an integrated computing device that combines a CPU core, program memory (Flash), data memory (RAM), and a rich peripheral set on a single silicon die. The PIC24F core uses a modified Harvard RISC architecture with a 16-bit instruction word, executing up to 16 million instructions per second (16 MIPS) at 32 MHz CPU clock. Within the broader semiconductor hierarchy, the PIC24FJ16MC102T sits in the microcontrollers category, a sub-class of microcontrollers (MCU) > embedded controllers > integrated circuits > semiconductors, and is positioned specifically in motor-control-optimized sub-family. Key features of this part include six enhanced 16-bit PWM outputs with edge-aligned or center-aligned modes and up to 7.5 ns PWM resolution, four 16-bit timers, two I2C, two SPI, two UART, 13 ADC channels at 500 ksps with 10-bit resolution, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurement, and Peripheral Pin Select (PPS) for flexible pin-function remapping. The 28-QFN (6x6) package has a low thermal resistance and supports industrial-grade -40C to +85C operation. From an architecture perspective, the PIC24FJ16MC102T-I/ML combines an aggressive 16-bit RISC engine with motor-tuned analog and timing peripherals. The CTMU enables precise current sensing and capacitive touch, while PPS allows designers to remap digital peripheral I/O to multiple physical pins, simplifying PCB routing. The 16 MIPS throughput at 32 MHz (4:1 instruction-cycle multiplier of the 8 MHz internal oscillator with PLL) provides deterministic control-loop execution for FOC or trapezoidal motor commutation. Typical applications include 3-phase BLDC or PMSM motor drives (low-voltage, sub-100 W), brushed DC motor controllers, electronic speed controllers (ESCs) for small drones and RC vehicles, fan and pump controllers, LED lighting controllers with analog dimming, and small-appliance motor control. The integrated 6-output PWM, 13 ADC inputs, and QEI (Quadrature Encoder Interface) support sensorless or sensor-based field-oriented control without external logic ICs. When designing with this device, allocate a 10 uF bulk decoupling capacitor plus 0.1 uF high-frequency bypass near the VDD pins, route the analog AVDD separately from VDD for ADC noise immunity, and follow Microchip AN1078 or AN1160 for sensorless FOC firmware reference. The exposed thermal pad of the QFN package should be soldered to a sufficient copper pour to keep junction temperature within the 85C industrial limit. This page synthesizes distributor pricing, drop-in alternatives from the same product family, and practical design notes that are not collected in the manufacturer datasheet alone, giving an engineer a single-point reference for selection and procurement.

見積もり お問い合わせ
PIC24FJ16MC102T-I/SO - 16-bit 16 MIPS Motor Control MCU | Microchip
PIC24FJ16MC102T-I/SO

PIC24FJ16MC102T-I/SO - 16-bit 16 MIPS Motor Control MCU | Microchip

The Microchip PIC24FJ16MC102T-I/SO is a 16-bit PIC microcontroller from the PIC24F motor-control series, delivering 16 MIPS at 32 MHz while integrating dedicated motor-control peripherals. Housed in a 28-pin SOIC package (7.50 mm body width, surface mount), the part features 16 KB of self-programmable Flash program memory (5.5K x 24 organization) and 1 KB of SRAM, supplied across the 3.0V–3.6V operating range characteristic of the PIC24FJ MC family. An MCU (microcontroller unit) is an integrated system-on-chip that combines a CPU core, volatile and non-volatile memory, and a configurable peripheral set behind a single package. The PIC24FJ family implements a modified Harvard architecture with a 16-bit data path, a 24-bit instruction word, and a 17-bit by 16-bit hardware multiplier; code is executed in a single cycle from Flash, and the device is C-compiler-optimized for embedded application development. The motor-control (MC) sub-family extends this base with peripherals specifically engineered for driving BLDC, PMSM, ACIM and stepper stages. Key features of the PIC24FJ16MC102T-I/SO include up to 6 PWM channels with dedicated PWM time bases for complementary, edge-aligned or center-aligned switching, a 6-channel 10-bit ADC with conversion rates up to 500 ksps, multiple communication interfaces (UART, SPI, I2C), an 8 MHz internal oscillator with 4x PLL option (yielding 32 MHz operation), and CTMU support for touch and current sensing. The device supports industrial-grade -40 °C to +85 °C operation, three 16-bit timers and one 32-bit timer, and PPS (Peripheral Pin Select) for flexible I/O mapping. Architecturally, the PIC24FJ MC family combines the standard PIC24 core with a Motor Control PWM (MCPWM) module capable of generating complementary PWM outputs with programmable dead time, a high-speed ADC trigger, and a QEI (Quadrature Encoder Interface) for closed-loop rotor position sensing. The CTMU (Charge Time Measurement Unit) provides on-chip timing for capacitive touch and for current-sensing analog front-ends, removing external analog conditioning. Typical applications include low-cost BLDC and PMSM sensorless or sensored motor drives (small fans, pumps, appliance motors), 3D-printer stepper control, washing-machine and home-appliance motor boards, and LED lighting power stages. Its small 28-SOIC footprint is also attractive for hobby motor-control boards and Christmas-light controllers where board area is constrained. When designing with this part, ensure the supply is decoupled with 10 µF bulk plus 100 nF ceramic close to VDD/AVDD pins, and respect the 3.6 V absolute maximum to avoid latch-up. The 'T' suffix indicates Tape & Reel packaging, and the -I (Industrial) temperature grade covers -40 °C to +85 °C operation. This page synthesizes distributor pricing, drop-in alternatives in the same SOIC-28 footprint, and practical design notes not aggregated in any single distributor listing — useful for engineers evaluating second-source or pin-compatible replacements for the PIC24FJ16MC102T-I/SO.

見積もり お問い合わせ
PIC24FJ16MC102T-I/SS - 16-bit 16 MIPS 16KB Flash Motor Control MCU | Microchip
PIC24FJ16MC102T-I/SS

PIC24FJ16MC102T-I/SS - 16-bit 16 MIPS 16KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ16MC102T-I/SS is a 16-bit ultra-low-cost motor-control microcontroller built on the PIC24F architecture, delivering 16 MIPS performance from a 32 MHz maximum core clock and integrating 16 KB of Flash program memory with 1 KB of SRAM. It is housed in a 28-pin Shrink Small Outline Package (SSOP-28) and is specified over the -40 °C to +85 °C industrial temperature range. The 'T' suffix indicates Tape & Reel packaging and the 'I' suffix denotes the industrial temperature grade. What is a motor-control MCU? A motor-control microcontroller is a class of embedded processor optimized for driving brushed DC, brushless DC (BLDC), stepper, and switched reluctance motors. These MCUs integrate dedicated peripherals such as multi-channel PWM modules, high-resolution timers, fast ADCs for current sensing, and input-capture blocks for rotor position feedback. Motor-control MCUs sit inside the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC, and within Microchip's portfolio they form the PIC24F MC family, with the dsPIC33 family providing higher-performance DSP-extended variants. Key features include a 6-channel 10-bit ADC for analog feedback, three 16-bit and one 32-bit timer/counter, a Charge Time Measurement Unit (CTMU) for capacitive touch or temperature sensing, Peripheral Pin Select (PPS) for flexible I/O mapping, and up to 21 general-purpose I/O pins. The integrated Motor Control PWM (MCPWM) module supports complementary outputs with programmable dead time, hardware fault input, and center-aligned or edge-aligned modes - all essential for safe half-bridge and full-bridge drive stages. Typical applications include low-cost BLDC ceiling fans, small appliance pump controllers, drone ESCs, HVAC damper drivers, and low-voltage sensorless FOC platforms where the MCU must execute a real-time control loop in software. The 16 MIPS headroom and CTMU simplify sensor integration in space-constrained designs. Designers should budget Flash for a bootloader or field firmware updates, since 16 KB fills quickly when adding a full motor-control state machine.

見積もり お問い合わせ
PIC24FJ192GA106-E/PT - 192KB Flash 16-bit MCU 64-TQFP
PIC24FJ192GA106-E/PT

PIC24FJ192GA106-E/PT - 192KB Flash 16-bit MCU 64-TQFP

The Microchip Technology PIC24FJ192GA106-E/PT is a 16-bit general-purpose Flash microcontroller from the PIC24FJ family, featuring 192KB of on-chip Flash program memory, 16KB of RAM, and a 64-pin TQFP (10x10 mm) package. The device operates at up to 32 MHz CPU clock with a 16-bit modified Harvard architecture and includes peripheral pin select (PPS) for flexible I/O mapping. This PIC microcontroller belongs to the PIC24FJ family of low-power 16-bit MCUs, a category that bridges the gap between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts. The PIC24FJ series integrates a wide peripheral set (UART, SPI, I2C, ADC, timers, RTCC, CTMU) on a single die and is intended for low-power (<100 nA standby current), connectivity-rich embedded applications that benefit from multiple serial ports and large memory footprints. Key features include three I2C, three SPI, four UART serial interfaces, 23 independent timers, a 16-channel 10-bit ADC, three analog comparators with programmable I/O, a hardware real-time clock/calendar (RTCC), and a charge time measurement unit (CTMU) for capacitive touch sensing. The integrated Peripheral Pin Select (PPS) remapping allows most digital peripherals to be assigned to a wide range of I/O pins, easing PCB layout. Typical applications include industrial control panels, low-power remote sensor nodes, USB/audio bridging bridges, graphic TFT display controllers, and capacitive-touch human-machine interfaces. The wide peripheral mix also suits medical instrumentation and connected consumer appliances. When designing with this MCU, observe the core decoupling rule: a low-ESR capacitor (such as tantalum) must be placed at the VDDCORE pin to stabilize the on-chip regulator. Programming/debugging is supported by Microchip's MPLAB ICD tools and the in-circuit debugger via dedicated PGx pins. This page synthesizes distributor pricing, drop-in PIC24FJ family alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24FJ192GA106-I/PT - 16-bit 32MHz 192KB Flash MCU | Microchip
PIC24FJ192GA106-I/PT

PIC24FJ192GA106-I/PT - 16-bit 32MHz 192KB Flash MCU | Microchip

The Microchip Technology PIC24FJ192GA106-I/PT is a 16-bit general-purpose Flash microcontroller in the PIC24F family, delivering 32 MIPS performance at 32 MHz, 192 KB of program Flash, 16 KB of RAM, and 53 general-purpose I/O pins, all housed in a 64-pin TQFP (10x10 mm) package. It integrates Peripheral Pin Select (PPS) for flexible signal routing, 3x I2C, 3x SPI, 4x UART, five 16-bit timers, a 16-channel 10-bit ADC, three analog comparators with programmable I/O, a hardware Real-Time Clock/Calendar (RTCC), and a Charge Time Measurement Unit (CTMU), making it a feature-dense general-purpose MCU for embedded designs. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a range of on-chip peripherals (ADC, timers, communication controllers, I/O). The PIC24FJ192GA106 belongs to the 16-bit PIC24F family of microcontrollers from Microchip, which sits below dsPIC33/PIC32 in the company's MCU hierarchy and is optimized for low-power general-purpose applications. It operates across the broader Microchip MCU taxonomy that includes 8-bit PIC10/12/16/18 families, 16-bit PIC24F/dsPIC33, and 32-bit PIC32 families. Key differentiating features include a Peripheral Pin Select (PPS) remappable peripheral system, 23 independent timers (5x 16-bit plus 16-bit Pair for input capture and PWM), on-chip USB 2.0 full-speed support, and ultra-low standby current under 100 nA with RTCC operation, enabling battery-backed designs. The architecture uses a 16-bit Modified Harvard RISC core with a 16-element x 16-bit working register array and executes most instructions in one cycle, achieving up to 32 MIPS at 32 MHz while operating from 2.0 V to 3.6 V. Typical applications include low-power industrial sensor hubs, USB HID peripherals, HVAC control panels, multi-protocol bridge devices, handheld instrumentation, medical patient monitoring, and automotive infotainment auxiliary controllers. The combination of PPS, large RAM (16 KB) for buffering, and multiple serial ports (3x I2C, 3x SPI, 4x UART) makes it ideal for connectivity-centric applications that need to talk to many peripherals simultaneously. When designing with this device, ensure the JTAG/ICSP programming interface is correctly routed to programming headers and that PPS configuration in firmware is verified before debugging peripheral issues. The PPS system greatly simplifies PCB layout because peripheral functions can be remapped to multiple physical pins in software, but this also means initial firmware must configure PPS registers before peripherals can be used.

見積もり お問い合わせ
PIC24FJ192GA106T-I/PT - 192KB Flash 16-bit MCU, 64-TQFP | Microchip
PIC24FJ192GA106T-I/PT

PIC24FJ192GA106T-I/PT - 192KB Flash 16-bit MCU, 64-TQFP | Microchip

The Microchip Technology PIC24FJ192GA106T-I/PT is a 16-bit PIC24F microcontroller with 192 KB of Flash program memory, 16 KB of RAM, and a 32 MHz (16 MIPS) CPU core, housed in a 64-pin TQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals into one device. The PIC24FJ family uses a 16-bit RISC Modified Harvard architecture with eXtreme Low Power (XLP) technology, sitting in the hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. This part is the tape-and-reel (T), industrial temperature (-I), 64-pin TQFP (/PT) variant. Key features include 192 KB (65.5K x 24) Flash, 16 KB RAM, 53 digital I/O pins, 3x I2C, 3x SPI, 4x UART, 23 independent timers, a 16-channel 10-bit ADC, three analog comparators, hardware RTCC, CTMU, and Peripheral Pin Select (PPS) for flexible signal routing. Standby current is below 100 nA in XLP sleep modes. The 32 MHz core delivers 16 MIPS throughput while consuming roughly 0.8 mA/MIPS active, with on-chip regulators supporting 2.0-3.6 V VDD. PPS allows most digital peripherals to be mapped to most I/O pins, simplifying PCB layout. The CTMU enables touch sensing, capacitive measurement, and time-of-flight applications. Typical applications include industrial control with connectivity (3x I2C, 3x SPI, 4x UART), low-power IoT sensor nodes using XLP sleep, HMI/touch interfaces via CTMU, and USB-free general-purpose embedded control. Multiple serial ports allow simultaneous sensor bus, display bus, and debug channels. When designing, observe VDD 2.0-3.6 V, place 0.1 uF + 10 uF decoupling near each VDD/VSS pair, and use PPS registers to assign peripheral functions. Industrial -40 C to +85 C operation is supported.

見積もり お問い合わせ
PIC24FJ192GA108-I/PT - 192KB Flash 16-bit MCU 80-TQFP | Microchip
PIC24FJ192GA108-I/PT

PIC24FJ192GA108-I/PT - 192KB Flash 16-bit MCU 80-TQFP | Microchip

The Microchip PIC24FJ192GA108-I/PT is a 16-bit PIC24F general-purpose flash microcontroller featuring 192 KB of program flash and 16 KB of RAM, housed in an 80-pin TQFP (PT) package with 12x12 mm body size. Operating from a 2.0V to 3.6V supply and reaching up to 32 MHz MIPS performance, the device targets low-power connected applications with sub-100 nA standby current. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data RAM, and peripherals (UART, SPI, I2C, ADC, timers) into a single chip. The PIC24F family belongs to the wider taxonomy: microcontroller -> embedded processor -> semiconductor IC. PIC24F parts use Microchip's modified Harvard RISC architecture with 16-bit instructions and 24-bit instruction words, designed to balance deterministic real-time response with low energy consumption for portable and battery-backed designs. Key features of the PIC24FJ192GA108 include: 192 KB flash (65.5K x 24 words), 16 KB SRAM, 4 KB EEPROM-like data flash, 16 MIPS at 32 MHz CPU speed, and a peripheral set covering 3x I2C, 3x SPI, 4x UART, and 23 independent timers. The part supports USB, Real-Time Clock and Calendar (RTCC), 16-channel 10-bit ADC, and parallel master port, while integrated nanoWatt XLP technology keeps standby draw below 100 nA. Internally the device separates regulated core power (1.8V via internal LDO) from I/O power (2.0-3.6V), enabling mixed-voltage peripherals. The 80-pin TQFP exposes up to 69 digital I/O lines and supports 5V-tolerant inputs, while programming is handled through ICSP and JTAG. This combination of high memory density and rich connectivity makes the part suitable for applications that previously required multiple 8-bit MCUs. Typical applications include industrial sensor hubs, low-power wireless gateways, USB human-interface devices (HID), battery-backed data loggers, and consumer appliances requiring graphical LCDs via integrated PMP. The 4x UART channels are particularly useful for protocol-bridging gateways (RS-232/485 to USB) and the parallel master port can directly drive external graphics memory. When designing with this device, ensure all VSS/VDD pins are connected per datasheet, ENVREG is configured correctly for internal vs external voltage regulator mode, and the JTAG/ICSP pins are reserved for in-circuit debugging unless disabled in firmware. This page synthesizes distributor pricing, drop-in alternatives, application notes, and PCB layout guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24FJ192GA108T-I/PT - 192KB Flash 16-bit MCU 80-TQFP | Microchip
PIC24FJ192GA108T-I/PT

PIC24FJ192GA108T-I/PT - 192KB Flash 16-bit MCU 80-TQFP | Microchip

The Microchip Technology PIC24FJ192GA108T-I/PT is a 16-bit PIC24F RISC general-purpose flash microcontroller featuring a 32 MHz core, 192 KB of program Flash memory (65.5K x 24 words), and 16 KB of RAM, housed in an 80-pin TQFP (12x12 mm) package. It belongs to the PIC24FJ192GA108 family, which combines low-power operation (<100 nA standby current) with a rich connectivity peripheral set designed for embedded applications requiring multiple serial interfaces and large memory buffers. What is a PIC24F microcontroller? A PIC24F is a 16-bit RISC microcontroller from Microchip that sits in the hierarchy: microcontroller (MCU) -> 16-bit MCU -> flash MCU -> low-power MCU -> PIC24F family. It is the lower-power complement to the dsPIC/PIC24H line, and is engineered for battery-friendly applications where 8-bit PICs lack memory or peripheral bandwidth but the system does not need a DSP engine. The 'F' suffix denotes Flash program memory and the 'J' denotes the nanoWatt XLP-style ultra-low-power process. Key features include 192 KB self-reprogrammable flash, 16 KB SRAM, an operating voltage range of 2.0 V to 3.6 V with 5.5 V tolerant digital inputs, three I2C, three SPI, four UART, and 23 independent timers. The device supports multiple power management modes (Sleep, Idle, Doze) with fast wake-up, configurable open-drain outputs, and high-current 18 mA sink/source capability on every I/O pin. It also integrates a Parallel Master Port (PMP) for off-chip memory or graphics expansion. Architecturally, the PIC24FJ192GA108T-I/PT uses a modified Harvard architecture with a 16-bit datapath and 24-bit instruction word. The CIP (Core Independent Peripherals) approach allows hardware state machines to handle timing-sensitive tasks without CPU intervention, reducing active time and current draw. The 32 MHz core delivers 16 MIPS of throughput while operating from as low as 2.0 V. Typical applications include industrial control and HMI panels, portable medical instrumentation, low-power sensor hubs, USB and serial gateway bridges, and battery-backed telemetry devices. The 16 KB RAM buffer is particularly useful for protocol stacks and audio sample buffering in DSP-lite workloads. Designers should pay attention to the 2.0-3.6 V supply constraint and avoid 5 V system buses unless using the 5.5 V tolerant digital inputs. Decoupling requires at least one 100 nF ceramic capacitor per VDD/VSS pair plus a bulk 10 µF near the ICSP programming header. For firmware development, MPLAB X IDE with the XC16 compiler is the standard toolchain. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet alone - useful for engineers evaluating long-term availability and second-source options for industrial programs.

見積もり お問い合わせ
PIC24FJ192GA110-E/PT - 16-bit 192KB Flash MCU | Microchip
PIC24FJ192GA110-E/PT

PIC24FJ192GA110-E/PT - 16-bit 192KB Flash MCU | Microchip

The Microchip Technology PIC24FJ192GA110-E/PT is a 16-bit, general-purpose flash microcontroller in the PIC24F family, featuring 192 KB of self-reprogrammable flash, 16 KB of RAM, and a 32 MHz MIPS core capable of 16 MIPS throughput. Housed in a 100-pin TQFP (12x12 mm) surface-mount package, the -E temperature-grade suffix designates the extended industrial temperature range of -40C to +125C. A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU designed by Microchip for embedded control applications that demand low power, ample memory, and rich connectivity. Within the broader taxonomy it sits between 8-bit PIC MCUs and 32-bit PIC32 devices, balancing code density, peripheral integration, and cost. PIC24F parts share the PIC24 instruction set with 16-bit data paths and execute one instruction per two clock cycles, delivering up to 16 MIPS at 32 MHz while drawing less than 100 nA in standby. Key features include Peripheral Pin Select (PPS) for flexible I/O mapping, three I2C, three SPI, and four UART serial interfaces, twenty-three independent timers, a 16-channel 10-bit ADC with 500 ksps throughput, hardware RTCC, and selectable power management modes including Sleep, Idle, and Doze. The CTMU peripheral supports capacitive touch sensing, while Parallel Master Port and EPMP-like external bus options address larger memory or graphics subsystems. Operating voltage spans 2.0 V to 3.6 V with 5.5 V-tolerant digital inputs for mixed-voltage designs. The 100-pin TQFP package exposes up to 85 I/O pins and supports JTAG/ICSP in-system programming plus self-programmability under software control. The architectural sweet spot is battery-powered and connectivity-rich embedded applications where on-chip RAM (16 KB) doubles compared with PIC24FJ64 devices in the same pinout, enabling larger buffers, audio samples, or protocol stacks. Typical applications include industrial automation controllers, low-power sensor hubs, HMI/graphical displays, USB device-class peripherals, and consumer devices requiring UART/SPI/I2C bridging. The high RAM/flash ratio suits protocol translation, audio streaming, and lightweight graphics rendering. When designing, take advantage of PPS to remap peripherals to available pins and route analog signals to dedicated ANx pins to minimize digital noise coupling. Plan power sequencing and decoupling per the family reference manual. This page synthesizes distributor pricing, drop-in PIC24FJ192GA110 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24FJ192GA110-I/PT - 16-Bit MCU 192KB Flash 32MHz | Microchip
PIC24FJ192GA110-I/PT

PIC24FJ192GA110-I/PT - 16-Bit MCU 192KB Flash 32MHz | Microchip

The Microchip PIC24FJ192GA110-I/PT is a 16-bit general-purpose flash microcontroller from the PIC® 24F family, delivering 192KB of program flash memory, 16KB of SRAM, and 32 MIPS performance at 32 MHz in a 100-pin TQFP (12x12 mm) package. It operates from 2.0V to 3.6V with 5.5V-tolerant digital inputs, integrates Peripheral Pin Select (PPS) for flexible digital-function remapping, and ships with a rich connectivity peripheral set including 3x I²C, 3x SPI, 4x UART, and 23 independent timers. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a wide range of peripherals (timers, communication controllers, ADCs, GPIO) on one die. PIC24F microcontrollers sit in Microchip's 16-bit MCU hierarchy above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32MX/dsPIC33 parts. The PIC24FJ192GA110 belongs to the General Purpose (GP) sub-family, optimized for low-power (<100 nA standby) and connectivity-rich designs with peripheral-rich bridging capability. Key differentiating specifications include 192KB self-reprogrammable flash, 16KB SRAM, an 8 MHz internal oscillator with 4x PLL and multiple divide options, a 17-bit single-cycle hardware multiplier, a 16-bit hardware divider, and 16 working registers optimized for the C compiler. The PPS (Peripheral Pin Select) block lets the developer remap most digital peripherals to any compatible digital I/O pin after PCB layout, which dramatically simplifies board routing on dense 100-pin designs and enables easy migration between 64-, 80-, and 100-pin package variants of the same family without firmware changes. The PIC24F core uses a modified Harvard architecture with a 16-bit data path, enabling 32 MHz operation with deterministic interrupt latency suitable for real-time control. On-chip peripherals include brown-out reset, low-voltage detection (LVD), high-current sink/source (18 mA/18 mA) digital I/O, and configurable open-drain outputs. The device supports Sleep, Idle, and Doze power-management modes with fast wake-up to balance responsiveness with battery life in portable or always-on designs. Typical applications include embedded control boards, industrial automation nodes, user-interface modules with multiple displays, low-power sensing nodes, and bridging designs that fan out across several serial buses. The 3x I²C / 3x SPI / 4x UART mix is especially attractive when the design must simultaneously drive a graphics display, several sensors, and a wired uplink. When designing with this MCU, observe the 2.0V to 3.6V supply range, leverage 5.5V-tolerant digital inputs to interface directly to legacy 5V logic, and use PPS to clean up the board layout. If the design is later resized to the 64- or 80-pin package in the same family, PPS allows pinout migration without firmware rework. This page synthesizes distributor pricing, drop-in package alternatives, and practical engineering guidance not found in the manufacturer datasheet alone.

見積もり お問い合わせ
PIC24FJ192GA110T-I/PF - 16-bit 32MHz MCU, 192KB Flash, 100-TQFP | Microchip
PIC24FJ192GA110T-I/PF

PIC24FJ192GA110T-I/PF - 16-bit 32MHz MCU, 192KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ192GA110T-I/PF is a 16-bit PIC24F microcontroller featuring a 32MHz CPU core, 192KB of Flash program memory (organized as 65.5K x 24), and 16KB of RAM, housed in a 100-pin TQFP (14x14) package. It belongs to the PIC24F family with eXtreme Low Power (XLP) technology, delivering <100nA standby current for battery-driven applications. The 'T' suffix indicates Tape & Reel packaging and 'I/PF' denotes the industrial temperature grade in the 100-pin TQFP package. What is a 16-bit MCU? A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, sitting between 8-bit controllers and 32-bit ARM Cortex devices in capability. The PIC24F architecture uses a Modified Harvard RISC design with a 16-bit instruction set, offering up to 16 MIPS throughput while preserving code density advantages of 8-bit PIC devices. Within the broader taxonomy, PIC24F belongs to: MCU -> 16-bit MCU -> Microchip PIC24 family -> PIC24F sub-family -> XLP low-power series. Key features of this part include three I2C buses, three SPI ports, four UART channels, 23 independent timers, and a hardware Real-Time Clock/Calendar (RTCC). It integrates a 16-channel 10-bit ADC capable of 500 ksps, multiple PWM modules, and a charge time measurement unit (CTMU) for capacitive touch sensing. The 100-pin TQFP package provides up to 85 general-purpose I/O pins, allowing extensive peripheral expansion. The part operates from 2.0V to 3.6V and includes a 32kHz secondary oscillator for low-power modes. The XLP technology enables wake-up from <1uA sleep current, critical for IoT battery life. Typical applications include industrial control panels, USB peripherals, graphical displays, sensor hubs, and low-power IoT edge nodes. The abundant RAM and Flash support graphical user interfaces and wireless protocol stacks. The flexible serial connectivity makes it suitable for bridging sensor networks. When designing with this MCU, ensure decoupling: place 100nF ceramic capacitors near each VDD/VCAP pin pair, and use a 10uF bulk capacitor on the main 3.3V rail. Configure the JTAG/ICSP pins according to in-circuit programming requirements to avoid debugger conflicts. This page synthesizes distributor pricing from 4 sources, drop-in alternatives from the PIC24F family in the same 100-TQFP footprint, and practical design notes drawn from the Microchip datasheet and application notes not consolidated in a single product brief.

見積もり お問い合わせ
PIC24FJ192GA110T-I/PT - 16-bit MCU, 192KB Flash, 100-TQFP | Microchip
PIC24FJ192GA110T-I/PT

PIC24FJ192GA110T-I/PT - 16-bit MCU, 192KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ192GA110T-I/PT is a 16-bit PIC24F microcontroller featuring 192KB of Flash program memory (65.5K x 24), 16KB of RAM, and a 32MHz (16 MIPS) CPU core, housed in a 100-pin TQFP (PT) package with 85 digital I/O pins. The 'T' suffix indicates tape-and-reel packaging, the 'I' indicates the industrial -40C to +85C temperature range, and 'PT' indicates the 100-pin TQFP package. A 16-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU, memory (Flash and RAM), peripherals, and I/O into a single silicon die. PIC24F devices belong to Microchip's eXtreme Low Power (XLP) family and sit between 8-bit PIC MCUs and 32-bit PIC32 devices in the product hierarchy, optimized for battery-friendly mixed-signal embedded designs. The 16-bit modified Harvard architecture executes instructions in a single cycle (including hardware multiply/divide) at up to 16 MIPS. Key features include 192KB self-reprogrammable Flash, 16KB SRAM, 8MHz internal oscillator with 4x PLL (32MHz system clock), 85 I/O pins with 18mA source/sink capability, three I2C, three SPI, four UART, and 23 independent timers. The operating voltage range of 2.0V to 3.6V and <100nA standby current suit battery-powered applications. Selectable Sleep, Idle, and Doze power-management modes enable aggressive energy budgets, while 5.5V-tolerant digital inputs simplify interfacing to 3.3V rails. The PIC24F core combines a 17-bit single-cycle multiplier and dedicated barrel shifter for DSP-style arithmetic, supporting C compiler code density approaching ARM Cortex-M0 levels while retaining 8-bit PIC ecosystem compatibility. Charge Time Measurement Unit (CTMU) and 12-bit ADC are typical of the GA1xx family, supporting touch sensing and precision analog measurement. Typical applications include industrial control panels, medical instrumentation, low-power sensor hubs, USB/connectivity bridges, graphical user interfaces, and automotive body modules. The high pin count (100 TQFP) makes it suitable for designs needing both generous analog channels and rich digital connectivity. When designing with this device, plan I/O assignments carefully because the GA1xx family multiplexes many peripherals onto the same pins. Always include decoupling capacitors on every VDD/AVDD pin pair and follow Microchip's 100-pin TQFP layout guidelines for thermal dissipation at industrial temperatures. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
PIC24FJ192GB106-I/MR - 192KB Flash USB OTG MCU | Microchip
PIC24FJ192GB106-I/MR

PIC24FJ192GB106-I/MR - 192KB Flash USB OTG MCU | Microchip

The Microchip PIC24FJ192GB106-I/MR is a 16-bit microcontroller from the PIC24F family featuring 192KB of Flash program memory, 16KB of RAM, and integrated USB On-The-Go (OTG) full-speed support. The device operates at up to 32MHz (16 MIPS) and is housed in a 64-pin VQFN (9x9 mm) package. Its peripheral set targets low-power connectivity applications requiring multiple serial channels. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, plus configurable peripherals on a single silicon die. The PIC24F family uses a 16-bit modified Harvard architecture with one instruction per cycle and 16 working registers, sitting in the performance tier between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. The 'FJ' prefix indicates the use of Microchip's eXtreme Low Power (XLP) technology, allowing standby currents below 100 nA, and the 'GB' suffix signals integrated USB-OTG with a dedicated transceiver and pull-up/pull-down resistors. Key specifications include 192KB (65.5K x 24 words) of self-programmable Flash, 16KB of RAM for data buffering, and a USB 2.0 full-speed OTG controller with internal transceiver. The device exposes three I2C, three SPI, four UART channels, 23 independent timers, and an RTCC with calendar mode. The 64-VQFN package provides up to 52 general-purpose I/O pins, all 5V tolerant, supporting PPS (Peripheral Pin Select) for flexible peripheral-to-pin mapping. The PIC24FJ192GB106 architecture combines a 16-bit datapath with 24-bit instruction words, enabling C-friendly addressing and single-cycle hardware multiply. XLP technology supports deep sleep, sleep, and idle modes with on-the-fly wake via RTCC, interrupts, or USB resume signaling. The integrated USB-OTG controller implements session request and host negotiation protocols, allowing the MCU to function as both USB device and limited USB host without an external PHY. Typical applications include USB peripherals (HID, CDC, MSD class devices), low-power sensor hubs with USB charging indication, industrial data loggers with USB mass storage, USB-to-UART/I2C/SPI bridges, and battery-powered IoT terminals. The XLP feature set and integrated USB make the part especially attractive for portable medical, consumer, and point-of-sale products. When designing with this device, ensure the USB VBUS pin is connected through the proper 5V-tolerant network and follow Microchip's USB OTG layout guidelines to minimize EMI. The PPS remap registers must be configured and locked before any peripheral I/O is reliable; consult Microchip application notes for OTG cable detection firmware patterns. This page synthesizes distributor pricing, drop-in same-family and cross-family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten the BOM-evaluation and PCB-validation cycle.

見積もり お問い合わせ
PIC24FJ192GB108-I/PT - 192KB Flash USB MCU 80-TQFP | Microchip
PIC24FJ192GB108-I/PT

PIC24FJ192GB108-I/PT - 192KB Flash USB MCU 80-TQFP | Microchip

The Microchip Technology PIC24FJ192GB108-I/PT is a 16-bit PIC24F microcontroller with 192KB Flash, 16KB RAM, integrated USB On-The-Go (OTG), and a 32MHz CPU core, housed in an 80-pin TQFP (12x12mm) package. Headline parameters: 192KB (65.5K x 24) program Flash, 16KB RAM, 80-TQFP (12x12) package, 2.0V-3.6V Vdd range, and <100nA standby current per the Microchip product family description. A PIC microcontroller (MCU) is a compact integrated circuit containing a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, UARTs, ADC, communication interfaces). The PIC24F family uses a 16-bit modified Harvard RISC architecture that delivers up to 16 MIPS at 32MHz while retaining the PIC ecosystem's deterministic interrupt model. Within the broader taxonomy, PIC24F devices sit between 8-bit PIC18 and 32-bit PIC32 families, targeting USB-enabled, low-power, mid-complexity embedded designs. Key features include a full-speed USB 2.0 On-The-Go peripheral with integrated transceiver, three I2C, three SPI, four UART channels, 23 independent timers, a 10-bit ADC (typically 16 channels on 80-pin parts), and multiple PWM outputs suitable for motor and lighting control. The 192KB Flash supports large protocol stacks and dual-image bootloaders, while 16KB RAM enables sizeable communication buffers for TCP/IP, USB CDC, or graphics applications. The integrated RTCC and deep-sleep states with nanoWatt technology deliver the <100nA standby current cited in Microchip's product brief. Architecture-wise, the device pairs the PIC24F CPU with separate program and data buses, a hardware multiplier, and DMA-capable peripheral mapping. The USB OTG block includes the physical transceiver and the SIE, eliminating the external PHY; this shortens the BOM for HID, CDC, MSD, and vendor-class designs. The 80-pin TQFP exposes up to 65 general-purpose I/O lines, allowing direct interface to TFT displays, capacitive touch controllers, and external memory. Typical applications include USB peripherals (barcode scanners, POS terminals, data loggers), low-power sensor hubs with USB charging, industrial HMI panels, audio playback docks, and battery-powered instrumentation that benefits from USB connectivity and nanoWatt standby. The wide operating voltage also makes the part well suited to portable medical and consumer accessories. When designing with this MCU, allocate the USB DP/DPU pins carefully and follow Microchip's USB layout guidelines (90-ohm differential, controlled impedance, common-mode choke option for host mode). Verify Vdd rise time and decoupling (typically 100nF + 4.7uF) so the internal regulator settles before the USB transceiver is enumerated. This page synthesizes distributor pricing, validated drop-in alternatives from the PIC24F family, and practical design notes that complement - not duplicate - the manufacturer datasheet.

見積もり お問い合わせ
PIC24FJ192GB108T-I/PT - 16-Bit 32MHz USB OTG MCU, 192KB Flash | Microchip
PIC24FJ192GB108T-I/PT

PIC24FJ192GB108T-I/PT - 16-Bit 32MHz USB OTG MCU, 192KB Flash | Microchip

The Microchip Technology PIC24FJ192GB108T-I/PT is a 16-bit PIC24F microcontroller featuring a 32MHz core, 192KB of Flash program memory (65.5K x 24 words), and 16KB of RAM, housed in an 80-pin TQFP (12x12 mm) package with industrial -40C to +85C temperature rating. The 'T' suffix denotes tape-and-reel packaging and the 'I' suffix indicates industrial temperature range, while 'GB' in the part number identifies the integrated USB On-The-Go (OTG) peripheral that distinguishes this family from the GA-series parts. A 16-bit microcontroller is an embedded processor core that executes instructions on 16-bit-wide data paths, typically based on a RISC architecture. The PIC24F family belongs to Microchip's broader 16-bit MCU hierarchy: PIC24F -> PIC24 -> dsPIC33 (with DSP) -> 16-bit microcontrollers -> microcontrollers -> embedded semiconductors. This 'F' family emphasizes ultra-low-power eXtreme Low Power (XLP) operation with standby current below 100nA, making it a power-optimized mid-tier option between 8-bit PIC16/PIC18 MCUs and high-performance 32-bit PIC32 devices. Key differentiating features of this part include: native USB OTG controller (host + device role), 16KB RAM for large data buffering, three I2C and three SPI peripherals plus four UARTs for rich connectivity, 23 independent timers, and rich analog with 10/12-bit ADC. The 80-TQFP footprint also exposes the parallel master port, allowing connection to external bus peripherals or graphics controllers. The USB OTG capability is the primary reason engineers choose GB-series PIC24F parts over the otherwise-similar GA-series that lacks USB. The part uses Microchip's modified Harvard architecture with a 16-bit instruction word and 24-bit data path, providing up to 16 MIPS performance at 32MHz / 3.3V. XLP technology combined with multiple idle and sleep modes allows battery-powered products to extend operating life; the <100nA standby current enables years of operation from a coin cell when the MCU periodically wakes to sample sensors. Typical applications include USB peripherals (HID, CDC, mass storage), portable medical devices (blood-glucose meters, pulse oximeters), industrial data loggers with USB connectivity, consumer electronics with USB charging and data exchange, and embedded HMI/graphics products that require both USB and the parallel master port. When designing with this part, ensure the on-chip voltage regulator is properly decoupled (the ENVREG pin requires an external capacitor per the datasheet). Plan oscillator and PLL configuration carefully because the 32MHz instruction rate derives from the internal FRC or external crystal/clock, and USB Full Speed (12Mbps) requires a 48MHz USB clock domain. For low-power designs, use the deep-sleep and RTCC modes to drop standby current below 100nA. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The PIC24FJ192GB108T-I/PT is part of the PIC24FJxxxGB1xx family with USB OTG and is supplied on tape and reel for high-volume SMT assembly.

見積もり お問い合わせ