PIC24FJ192GA110T-I/PF - 16-bit 32MHz MCU, 192KB Flash, 100-TQFP | Microchip
部品番号: PIC24FJ192GA110T-I/PF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.32 | $8.32 |
| 10 | $7.49 | $74.90 |
| 100 | $6.65 | $665.00 |
| 500 | $5.98 | $2,990.00 |
| 1,000 | $5.31 | $5,310.00 |
PIC24FJ192GA110T-I/PF 概要
What is a 16-bit MCU? A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, sitting between 8-bit controllers and 32-bit ARM Cortex devices in capability. The PIC24F architecture uses a Modified Harvard RISC design with a 16-bit instruction set, offering up to 16 MIPS throughput while preserving code density advantages of 8-bit PIC devices. Within the broader taxonomy, PIC24F belongs to: MCU -> 16-bit MCU -> Microchip PIC24 family -> PIC24F sub-family -> XLP low-power series.
Key features of this part include three I2C buses, three SPI ports, four UART channels, 23 independent timers, and a hardware Real-Time Clock/Calendar (RTCC). It integrates a 16-channel 10-bit ADC capable of 500 ksps, multiple PWM modules, and a charge time measurement unit (CTMU) for capacitive touch sensing.
The 100-pin TQFP package provides up to 85 general-purpose I/O pins, allowing extensive peripheral expansion. The part operates from 2.0V to 3.6V and includes a 32kHz secondary oscillator for low-power modes. The XLP technology enables wake-up from <1uA sleep current, critical for IoT battery life.
Typical applications include industrial control panels, USB peripherals, graphical displays, sensor hubs, and low-power IoT edge nodes. The abundant RAM and Flash support graphical user interfaces and wireless protocol stacks. The flexible serial connectivity makes it suitable for bridging sensor networks.
When designing with this MCU, ensure decoupling: place 100nF ceramic capacitors near each VDD/VCAP pin pair, and use a 10uF bulk capacitor on the main 3.3V rail. Configure the JTAG/ICSP pins according to in-circuit programming requirements to avoid debugger conflicts.
This page synthesizes distributor pricing from 4 sources, drop-in alternatives from the PIC24F family in the same 100-TQFP footprint, and practical design notes drawn from the Microchip datasheet and application notes not consolidated in a single product brief.
ドロップイン代替品: PIC24FJ192GA110T-I/PF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ192GA110T-I/PF （同一形状・フットプリント） — 相違点: Package, Core Architecture, Program Memory (Flash), ADC, Timers.
クイック比較ツール — 並列比較する代替部品を選択:
PIC24FJ128GA110T-I/PF
✅ ドロップイン✓ 在庫あり
$5.93 / 個
データシートを見る →PIC24FJ192GA110-E/PT
✅ ドロップイン✓ 在庫あり
$8.62 / 個
データシートを見る →PIC24FJ192GA110-I/PT
✅ ドロップイン✓ 在庫あり
$4.78 / 個
データシートを見る →PIC24FJ128GB110-I/PF
✅ ドロップイン✓ 在庫あり
$4.05 / 個
データシートを見る →PIC24FJ128GU410-I/PT
✅ ドロップイン✓ 在庫あり
$3.83 / 個
データシートを見る →PIC24FJ256GA110-I/PF
✅ ドロップイン✓ 在庫あり
$5.7 / 個
データシートを見る →PIC24FJ128GA010-I/PT
✅ ドロップイン✓ 在庫あり
$4.95 / 個
データシートを見る →PIC24FJ192GA110T-I/PF 最大定格＆電気的特性
| Core Architecture | PIC24F 16-bit RISC MCU |
| CPU Core | PIC24F (Modified Harvard RISC) |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 192 KB (65.5K x 24) |
| RAM | 16 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| 動作温度範囲 | -40 C to +85 C (Industrial) |
| パッケージ | 100-TQFP (14x14 mm) |
| 実装タイプ | Surface Mount |
| I/O Pins | 85 |
| ADC | 16-channel, 10-bit, 500 ksps |
| UART | 4 |
| SPI | 3 |
| I2C | 3 |
| Timers | 23 independent |
| Standby Current (XLP) | <100 nA |
| RTCC | Yes (Hardware Real-Time Clock/Calendar) |
| Packaging | Tape & Reel (T suffix) |
| MSLレベル | 3 (per JEDEC J-STD-020) |
| RoHS ステータス | Compliant |
PIC24FJ192GA110T-I/PF ピン構成
| ピン 1 | RG15 — I/O port G bit 15 |
| ピン 2 | VDD — Digital supply voltage |
| ピン 3 | RP10/RF14 — Remappable peripheral / I/O port F bit 14 |
| ピン 4 | RP17/RF13 — Remappable peripheral / I/O port F bit 13 |
| ピン 5 | RP2/RF2 — Remappable peripheral / I/O port F bit 2 |
| ピン 6 | RP3/RF3 — Remappable peripheral / I/O port F bit 3 |
| ピン 7 | RP4/RF4 — Remappable peripheral / I/O port F bit 4 |
| ピン 8 | RP5/RF5 — Remappable peripheral / I/O port F bit 5 |
| ピン 9 | VSS — Digital ground |
| ピン 10 | VDD — Digital supply voltage |
| ピン 11 | RP6/RF6 — Remappable peripheral / I/O port F bit 6 |
| ピン 12 | RP7/RF7 — Remappable peripheral / I/O port F bit 7 |
| ピン 13 | RP8/RF8 — Remappable peripheral / I/O port F bit 8 |
| ピン 14 | RP9/RF9 — Remappable peripheral / I/O port F bit 9 |
| ピン 15 | RP12/RG0 — Remappable peripheral / I/O port G bit 0 |
| ピン 16 | RP13/RG1 — Remappable peripheral / I/O port G bit 1 |
| ピン 17 | OSC1 — Primary oscillator crystal input |
| ピン 18 | OSC2 — Primary oscillator crystal output |
| ピン 19 | SOSCO/RG14 — Secondary oscillator output / I/O port G bit 14 |
| ピン 20 | SOSCI/RC13 — Secondary oscillator input / I/O port C bit 13 |
| ピン 21 | VSS — Digital ground |
| ピン 22 | VDD — Digital supply voltage |
| ピン 23 | RA0 — I/O port A bit 0 (AN0) |
| ピン 24 | RA1 — I/O port A bit 1 (AN1) |
| ピン 25 | RA2 — I/O port A bit 2 (AN2) |
| ピン 26 | RA3 — I/O port A bit 3 (AN3) |
| ピン 27 | RA4 — I/O port A bit 4 (AN4) |
| ピン 28 | RA5 — I/O port A bit 5 (AN5) |
| ピン 29 | RA6 — I/O port A bit 6 (OSC2 alt) |
| ピン 30 | RA7 — I/O port A bit 7 (OSC1 alt) |
| ピン 31 | VSS — Digital ground |
| ピン 32 | VDD — Digital supply voltage |
| ピン 33 | RB0 — I/O port B bit 0 (AN8, PGED1) |
| ピン 34 | RB1 — I/O port B bit 1 (AN9, PGEC1) |
| ピン 35 | RB2 — I/O port B bit 2 (AN10) |
| ピン 36 | RB3 — I/O port B bit 3 (AN11) |
| ピン 37 | RB4 — I/O port B bit 4 (AN12) |
| ピン 38 | RB5 — I/O port B bit 5 (AN13) |
| ピン 39 | RB6 — I/O port B bit 6 (AN14, PGED2) |
| ピン 40 | RB7 — I/O port B bit 7 (AN15, PGEC2) |
| ピン 41 | VSS — Digital ground |
| ピン 42 | VDD — Digital supply voltage |
| ピン 43 | RC1 — I/O port C bit 1 |
| ピン 44 | RC2 — I/O port C bit 2 |
| ピン 45 | RC3 — I/O port C bit 3 |
| ピン 46 | RC4 — I/O port C bit 4 |
| ピン 47 | TDO/RA8 — JTAG TDO / I/O port A bit 8 |
| ピン 48 | TDI/RA9 — JTAG TDI / I/O port A bit 9 |
| ピン 49 | TCK/RA4 — JTAG TCK (shared) |
| ピン 50 | TMS/RB12 — JTAG TMS / I/O port B bit 12 |
| ピン 51 | RC12 — I/O port C bit 12 |
| ピン 52 | VSS — Digital ground |
| ピン 53 | VDD — Digital supply voltage |
| ピン 54 | RD0 — I/O port D bit 0 |
| ピン 55 | RD1 — I/O port D bit 1 |
| ピン 56 | RD2 — I/O port D bit 2 |
| ピン 57 | RD3 — I/O port D bit 3 |
| ピン 58 | RD4 — I/O port D bit 4 |
| ピン 59 | RD5 — I/O port D bit 5 |
| ピン 60 | RD6 — I/O port D bit 6 |
| ピン 61 | RD7 — I/O port D bit 7 |
| ピン 62 | VSS — Digital ground |
| ピン 63 | VDD — Digital supply voltage |
| ピン 64 | RE0 — I/O port E bit 0 |
| ピン 65 | RE1 — I/O port E bit 1 |
| ピン 66 | RE2 — I/O port E bit 2 |
| ピン 67 | RE3 — I/O port E bit 3 |
| ピン 68 | RE4 — I/O port E bit 4 |
| ピン 69 | RE5 — I/O port E bit 5 |
| ピン 70 | RE6 — I/O port E bit 6 |
| ピン 71 | RE7 — I/O port E bit 7 |
| ピン 72 | VSS — Digital ground |
| ピン 73 | VDD — Digital supply voltage |
| ピン 74 | RF0 — I/O port F bit 0 |
| ピン 75 | RF1 — I/O port F bit 1 |
| ピン 76 | RG2 — I/O port G bit 2 |
| ピン 77 | RG3 — I/O port G bit 3 |
| ピン 78 | RG6 — I/O port G bit 6 |
| ピン 79 | RG7 — I/O port G bit 7 |
| ピン 80 | RG8 — I/O port G bit 8 |
| ピン 81 | RG9 — I/O port G bit 9 |
| ピン 82 | VSS — Digital ground |
| ピン 83 | VDD — Digital supply voltage |
| ピン 84 | RG10 — I/O port G bit 10 |
| ピン 85 | RG11 — I/O port G bit 11 |
| ピン 86 | RG12 — I/O port G bit 12 |
| ピン 87 | RG13 — I/O port G bit 13 |
| ピン 88 | RG14 — I/O port G bit 14 |
| ピン 89 | RG15 — I/O port G bit 15 |
| ピン 90 | MCLR — Master Clear (reset) input |
| ピン 91 | RA10 — I/O port A bit 10 |
| ピン 92 | RA11 — I/O port A bit 11 |
| ピン 93 | RA12 — I/O port A bit 12 |
| ピン 94 | RA13 — I/O port A bit 13 |
| ピン 95 | RA14 — I/O port A bit 14 |
| ピン 96 | RA15 — I/O port A bit 15 |
| ピン 97 | VSS — Digital ground |
| ピン 98 | VDD — Digital supply voltage |
| ピン 99 | RB8 — I/O port B bit 8 |
| ピン 100 | RB9 — I/O port B bit 9 |
主な用途
PIC24FJ192GA110T-I/PF の用途: 7 件s: Industrial Control Panels, USB Peripherals and HID Devices, Graphical Displays and HMI, Low-Power IoT Edge Nodes, Sensor Hubs and Data Acquisition, Medical and Health Monitoring Devices, Automotive Body and Comfort Electronics.
Industrial Control Panels
The PIC24FJ192GA110T-I/PF is well-suited for industrial control panels where its 32MHz 16-bit core, 85 I/O pins, and 4 UART ports provide direct drive for keypads, displays, and fieldbus interfaces. Its 192KB Flash accommodates complex state machines for PLC and HMI applications, while the 16KB RAM supports real-time data buffers. The XLP <100nA standby current preserves battery backup during power interruptions. Industrial temperature grade (-40C to +85C) handles factory floor thermal swings, and the 100-pin TQFP provides ample I/O for multiplexed key matrices and seven-segment displays.
おすすめ
USB Peripherals and HID Devices
For USB peripheral designs, the PIC24FJ128GB110-I/PF is preferred (drop-in alternative with USB OTG), but the PIC24FJ192GA110T-I/PF can serve as the main application processor paired with an external USB bridge. Its 192KB Flash supports USB stack, HID class drivers, and application firmware simultaneously. The 4 UART ports enable concurrent communication with sensors, while the 3 SPI buses drive high-speed peripherals like displays or external memory. Operating voltage of 2.0V to 3.6V supports both USB-powered 5V designs (via LDO) and direct 3.3V battery power.
おすすめ
Graphical Displays and HMI
The PIC24FJ192GA110T-I/PF drives small to medium graphical TFT and OLED displays via its parallel master port (PMP) and SPI interfaces. The 192KB Flash stores frame buffers, fonts, and graphics libraries, while 16KB RAM provides double-buffering for smooth animations. The 16-channel 10-bit ADC supports touch-screen analog front-ends. XLP technology enables battery-powered handheld HMI terminals with weeks of standby. The 100-TQFP package exposes enough pins for parallel RGB interfaces (8/16-bit) plus SPI/I2C for touch controllers.
おすすめ
Low-Power IoT Edge Nodes
The PIC24FJ192GA110T-I/PF delivers XLP-class <100nA standby current and a 16-bit 32MHz core capable of running wireless protocol stacks (ZigBee, LoRaWAN, BLE preprocessing). Its 192KB Flash stores the application code plus protocol library, while 16KB RAM supports message buffers and crypto workspaces. The 4 UART, 3 SPI, and 3 I2C buses simultaneously drive sensors, RF modules, and debug interfaces. Wake-up time from sleep under 5us preserves battery life in event-driven IoT applications operating from coin-cell or Li-ion batteries.
おすすめ
Sensor Hubs and Data Acquisition
The PIC24FJ192GA110T-I/PF aggregates multiple sensors through its 16-channel 10-bit 500 ksps ADC and four UART ports, supporting data loggers and multi-sensor fusion systems. The 192KB Flash stores calibration tables and DSP-style filtering routines, while 16KB RAM buffers sample streams between storage writes. The CTMU peripheral enables capacitive touch and time-of-flight measurements. The RTCC provides accurate timestamps for sensor data correlation. Hardware 23 timers drive precise sample intervals without CPU load.
おすすめ
Medical and Health Monitoring Devices
The PIC24FJ192GA110T-I/PF powers portable medical devices such as pulse oximeters, glucose meters, and patient wearables. Its XLP <100nA standby extends battery life to weeks or months. The 32MHz CPU executes signal-processing algorithms for biosensor data in real time. 192KB Flash supports FDA-compliant firmware with audit trails. Hardware RTCC provides accurate dosing schedules. Industrial temperature range ensures reliable operation across clinical and home environments. The 100-TQFP footprint accommodates multiple analog front-end connections through the 16-channel ADC.
おすすめ
Automotive Body and Comfort Electronics
For non-safety automotive body electronics such as HVAC controls, seat adjustment modules, and lighting controllers, the PIC24FJ192GA110T-I/PF offers sufficient computational resources. The 192KB Flash stores CAN/LIN stack and application logic, while 16KB RAM handles message buffers. The 4 UART ports support LIN bus communication via external transceivers, and 3 SPI buses drive actuator drivers. Operating from 2.0V to 3.6V with 3.3V LDO from the vehicle 12V rail. For safety-critical or AEC-Q100 qualified designs, consider the PIC24HJ or dsPIC33 families instead.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ192GA110T-I/PF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ128GA110T-I/PF | PIC24FJ192GA110-E/PT | PIC24FJ128GB110-I/PF | PIC24FJ256GA110-I/PF |
|---|---|---|---|---|---|
| Package | 100-TQFP (14x14) | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 192 KB | 128 KB | 192 KB | 128 KB | 256 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| USB Peripheral | No | No | No | Yes (USB 2.0 FS OTG) | No |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Packaging Form | Tape & Reel | Tape & Reel | Tray | Tray | Tray |
| I/O Pins | 85 | 85 | 85 | 83 | 85 |
主な差別化要因
- Largest Flash option in the GA110 family （vs PIC24FJ128GA110T-I/PF)
- No on-chip USB peripheral （vs PIC24FJ128GB110-I/PF)
- Industrial temperature range with Tape & Reel packaging （vs PIC24FJ192GA110-E/PT)
- 23 independent timers and 4 UART （vs PIC24FJ128GA010-I/PT)
設計ノート
Place a 100nF ceramic decoupling capacitor as close as possible to every VDD/VSS pin pair (5 pairs total in 100-pin TQFP). Add a single 10uF bulk capacitor on the main 3.3V rail. For XLP sleep mode operation below 100nA standby current, ensure no leakage paths through external pull-ups; use internal weak pull-ups where possible. The MCU's VBAT domain supports RTC retention down to 1.8V if a backup battery is connected to the SOSCI/SOSCO 32kHz crystal pins via a series resistor.
Route the 32.768kHz secondary oscillator traces (SOSCI/SOSCO) as short as possible with ground guard traces to minimize noise coupling. Place the primary crystal (typically 8MHz with PLL to 32MHz) close to OSC1/OSC2 pins with load capacitors sized per crystal manufacturer recommendations (typically 15-33pF). Maintain analog and digital ground separation; join at a single point near the MCU's VSS pin to avoid ground loops in ADC measurements.
Do not leave the MCLR pin floating - connect a 10kOhm pull-up to VDD. When using ICSP programming, ensure the PGED1/PGEC1 (RB0/RB1) and PGED2/PGEC2 (RB6/RB7) lines are not heavily loaded, or in-circuit programming will fail. Configure JTAG/TRACE pins as GPIO only after disabling the JTAG interface in the configuration bits, otherwise debugger conflicts occur. The 5V tolerance flag is FALSE on most pins - do not apply 5V signals without external level shifters.
The PIC24FJ192GA110T-I/PF ADC achieves 10-bit resolution; for noise-sensitive measurements, average multiple samples and use the dedicated VREF+/VREF- pins with external reference buffer capacitors (100nF ceramic). High-speed digital signals on adjacent pins can couple into analog inputs - place analog traces on inner PCB layers with ground plane separation. The CTMU peripheral provides 0.5ns resolution for time-of-flight and capacitive touch measurements when calibrated properly.
コンプライアンス情報
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - the PIC24F family is intended for industrial/consumer use; for automotive AEC-Q100 designs, consider dsPIC33AEC or PIC32MX automotive variants.
