マイクロコントローラ

製品 (18737)

ATSAMD20E15B-AUT - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip
ATSAMD20E15B-AUT

ATSAMD20E15B-AUT - ARM Cortex-M0+ 48MHz 32KB Flash MCU | Microchip

The Microchip ATSAMD20E15B-AUT is an ARM Cortex-M0+ based 32-bit microcontroller running at up to 48 MHz, integrating 32 KB of Flash and 4 KB of SRAM in a 32-pin TQFP (7x7 mm) package, qualified for industrial temperature range -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripheral interfaces (ADC, timers, communication buses) into one device. Microcontrollers sit at the heart of embedded systems, sitting below microprocessors in compute complexity but above simple logic ICs. Within the broader taxonomy: MCU -> 32-bit MCU -> ARM Cortex-M MCU -> Cortex-M0+ MCU -> low-power MCU -> SAM D20 family. The ATSAMD20E15B-AUT belongs to Microchip's SAM D20 family, designed for low-power, mixed-signal embedded designs. Key features include a 12-bit, up to 350 ksps ADC with up to 10 channels, a 10-bit 350 ksps DAC, six SERCOM channels configurable as UART/SPI/I2C, a 16-bit Timer/Counter, a Real-Time Clock, and full-speed USB 2.0 device support. The device operates from 1.62 V to 3.63 V, supports 48 MHz at 1.62-3.63 V in the -40C to +85C industrial range, and offers multiple low-power sleep modes with sub-microamp wake-up time. The on-chip SERCOM peripherals are highly reconfigurable, allowing one physical block to operate as either USART, SPI, or I2C - a design that minimizes pin count for varied interface requirements. The Cortex-M0+ core implements the ARMv6-M Thumb instruction set with a single-cycle I/O port for bit-banding, deterministic interrupt latency, and an optional Memory Protection Unit on equivalent family members. At 48 MHz, the core delivers 2.46 CoreMark/MHz, sufficient for sensor fusion, motor control loops, and simple protocol stacks. The integrated 32 KB Flash is rated for 10K erase/write cycles with retention; 4 KB SRAM supports most control-loop workloads. Typical applications include home automation controllers, consumer appliance interfaces, smart metering endpoints, IoT sensor nodes, industrial HMI panels, and low-power wireless sensor hub processors. The USB 2.0 full-speed device makes the part well suited to HID peripherals such as keyboards, mice, and custom HID-class tools. With AEC-Q100 variants available in the SAM D20 family, the same silicon architecture is also deployed in automotive body and chassis subsystems. When designing with this part, place a 0.1 uF decoupling capacitor as close as possible to each VDD pin and a bulk 4.7 uF capacitor on the main supply rail. Configure unused I/O pins as inputs with internal pull-up enabled to minimize quiescent current. For firmware development, Microchip's MPLAB X IDE with the XC32 compiler and Atmel Studio 7 both support the device, and SEGGER J-Link debug probes are fully compatible per SEGGER's supported device list. This page synthesizes distributor pricing across 9 channels, lists drop-in same-package alternatives from the SAM D20 family and competitor pin-compatible MCUs, and provides practical design notes that complement the manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E15B-MU - SAM D20E 32KB Flash Cortex-M0+ MCU | Microchip
ATSAMD20E15B-MU

ATSAMD20E15B-MU - SAM D20E 32KB Flash Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD20E15B-MU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, operating at up to 48 MHz with 32 KB of Flash and 4 KB of SRAM, packaged in a 32-pin VQFN (5x5 mm) with exposed thermal pad. It integrates a 12-bit ADC, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), an RTC, and six SERCOM communication interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, designed for deterministic embedded workloads. Within the power-management hierarchy, MCUs sit at the system-control tier above discrete logic and below application processors; they orchestrate sensors, user I/O, and low-bandwidth communications in battery-powered and industrial systems. The SAM D20 family is positioned by Microchip as the low-power entry point of the SAM Cortex-M lineup. Key features of the ATSAMD20E15B-MU include its 2.46 CoreMark/MHz performance, a single-cycle hardware multiplier, a SleepWalking peripheral event system, and an on-chip 32 kHz RTC oscillator with PLL-derived system clock. The device supports 1.62 V to 3.6 V supply operation, has a built-in brown-out detector, and provides up to 22 GPIO lines with peripheral multiplexing. Typical applications include home automation nodes, smart metering endpoints, consumer appliances, IoT sensor hubs, low-power wireless sensor platforms, and industrial control peripherals. The integrated PTC eliminates the need for an external touch-sensing IC in capacitive button, slider, and wheel designs. When designing with this part, observe the VQFN thermal pad soldering guidelines and ensure the SERCOM pin-mux is reviewed before PCB layout. Programming and debugging are supported through the SWD interface, requiring only two pins (SWDIO, SWDCLK) plus GND. This page consolidates distributor pricing, drop-in alternative ordering, and practical design notes for the ATSAMD20E15B-MU that are not collated in the manufacturer datasheet, including verified pin-compatible SAM D20 family members and recommended companion analog parts.

見積もり お問い合わせ
ATSAMD20E15B-MUT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip
ATSAMD20E15B-MUT

ATSAMD20E15B-MUT - 48MHz Cortex-M0+ MCU 32KB Flash | Microchip

The Microchip Technology ATSAMD20E15B-MUT is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller running at 48 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package. It belongs to the SAM D20E family and is qualified for industrial temperature range (-40C to +85C). The device integrates the Cortex-M0+ core with the Microchip peripheral touch controller (PTC) for capacitive touch sensing, making it well suited for home automation, consumer, metering, and industrial HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one IC. The Cortex-M0+ is ARM's smallest and most energy-efficient core, optimized for deterministic interrupt response and minimal die area. Within the broader hierarchy, the ATSAMD20E15B-MUT is a 32-bit MCU -> ARM Cortex-M microcontroller -> embedded microcontroller -> integrated circuit. Compared to legacy 8-bit MCUs such as PIC16, it delivers substantially higher computational throughput, more deterministic interrupt latency, and full 32-bit Thumb-2 instruction support. Key features include 48 MHz maximum CPU clock, 32 KB Flash, 4 KB SRAM, up to 6 SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 12-bit 350 ksps ADC with up to 10 channels, a 10-bit DAC, and the Peripheral Touch Controller supporting buttons, sliders, wheels, and proximity sensors. The device operates from 1.62 V to 3.63 V and offers multiple low-power sleep modes with sub-microamp deep-sleep current, enabling battery-powered designs. The ATSAMD20E15B-MUT leverages the Cortex-M0+ single-cycle IO bus for deterministic GPIO access and the Microchip Event System for inter-peripheral signaling without CPU intervention. Hardware cryptographic and true-random-number peripherals are not present on this device; security-sensitive applications should consider the SAML11 or SAME54 families instead. Typical applications include capacitive touch user interfaces for appliances, smart home sensor nodes, low-cost industrial control modules, battery-powered metering devices, and consumer wearables. The integrated PTC dramatically reduces BOM cost by eliminating mechanical buttons. When designing with this part, allocate the PTC pins to dedicated GPIO to avoid crosstalk with ADC inputs, and follow the SAM D20 datasheet reference decoupling network (1x 100 nF + 1x 4.7 uF) within 3 mm of the VDD pins to meet the noise floor of the 12-bit ADC. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E16A-ANT - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip
ATSAMD20E16A-ANT

ATSAMD20E16A-ANT - ARM Cortex-M0+ MCU, 48MHz, 64KB Flash | Microchip

The Microchip ATSAMD20E16A-ANT is a 32-bit ARM Cortex-M0+ based flash microcontroller running up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) package with green compound and an industrial temperature rating up to 105C. It belongs to the SAM D20E family, the compact-pincount member of the SAMD20 series, which Microchip targets at home automation, consumer, metering, and industrial applications where low power and deterministic Cortex-M0+ performance are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one package. The ARM Cortex-M0+ is the smallest, most energy-efficient core in the Cortex-M family; in the SAMD20 hierarchy it sits above 8-bit AVR/PIC microcontrollers but below Cortex-M3/M4 parts in compute density, making it ideal for cost-sensitive embedded control. The 48 MHz clock, single-cycle I/O access, and Microchip's peripheral touch (SERCOM, Event System) make it a workhorse for connected sensor nodes. Key differentiating features of the ATSAMD20E16A-ANT include 64 KB Flash / 8 KB SRAM with single-cycle I/O access, six SERCOM serial-communication modules that can each be configured as UART, SPI, or I2C, a 12-bit 350 ksps ADC with up to 20 channels, and a 10-bit 350 ksps DAC. The integrated Peripheral Touch Controller (PTC) supports capacitive touch sensing, while the Event System enables inter-peripheral signalling without CPU intervention, reducing active time and power. The device operates from 1.62 V to 3.63 V across the -40C to +105C industrial range. Architecturally, the SAMD20E16A-ANT uses a two-pin AHB-APB bus matrix, an 8-channel DMA controller, and SleepWalking peripherals that clock-gate unused logic. Its Sleep, Standby, and Backup modes draw single-digit microamp currents, which is the reason the family is so popular in battery-powered IoT end nodes. Programming is via SWD, and the Cortex-M0+ supports the full ARMv6-M instruction set including Thumb-2. Typical applications for the ATSAMD20E16A-ANT include home-automation sensor hubs (PIR, temperature, gas), industrial metering (water/gas/electricity), consumer appliances (coffee machines, washing machines), low-power IoT edge nodes, capacitive touch user interfaces, and small motor-control loops using the on-chip Timer/Counter blocks. The combination of 64 KB Flash, deterministic Cortex-M0+ core, and rich SERCOM peripherals makes it a flexible general-purpose MCU. When designing with this part, budget the VDDCORE decoupling carefully (1 uF + 100 nF close to the pin), ensure DFLL or PLL startup time is accounted for in your boot sequence, and select the TQFP-32 package only when you need breadboard-friendly prototyping or hand-reworkable assembly - the QFN/48-pin variants exist for higher pin-count needs. This page consolidates real distributor pricing (as of 2026-09-21), package-matched drop-in alternatives from the SAM D20 family, and practical hardware design notes beyond the manufacturer datasheet summary.

見積もり お問い合わせ
ATSAMD20E16A-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip
ATSAMD20E16A-AU

ATSAMD20E16A-AU - 48MHz Cortex-M0+ MCU, 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-AU is a 32-bit ARM Cortex-M0+ microcontroller (MCU) from the SMART SAM D20 family, featuring 64KB of Flash and 8KB of SRAM, running at up to 48 MHz, housed in a 32-pin TQFP (7x7 mm) package. It integrates the ARM Cortex-M0+ core with Microchip's peripherals optimized for low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and SRAM), and programmable peripherals on one die, enabling compact, low-power embedded control in applications from home appliances to industrial sensors. The Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for deterministic real-time control with a 2-stage pipeline and Thumb-2 instruction set. Within Microchip's portfolio, the SAM D20 sits between the tiny 8-bit PIC MCUs and the more capable Cortex-M4 SAM D/E/F families. Key features include 64KB of in-system programmable Flash (supporting NVM commands), 8KB SRAM, a 12-bit 350 ksps ADC with up to 14 channels, 8-channel SERCOM (configurable as UART/SPI/I2C), 16-bit timers, and a full-speed USB 2.0 device interface (on selected variants). The device operates from 1.62V to 3.63V with multiple power-saving modes (Idle, Standby, Backup) achieving deep-sleep currents in the microamp range. Typical applications include home automation endpoints, consumer electronics (HID devices, wearables, smart remotes), metering and energy monitoring, industrial sensor nodes, and low-cost USB peripherals. The integrated USB controller simplifies Human Interface Devices such as keyboards, mice, and game controllers. When designing with the ATSAMD20E16A-AU, ensure the VDDCORE pin is decoupled with 1µF and 100nF capacitors placed within 5mm of the pin to maintain core voltage stability during sleep-to-active transitions. The SERCOM peripheral configuration must be locked before use to prevent glitches in asynchronous serial traffic. This page synthesizes distributor pricing, drop-in alternatives from the same SAMD20 family, and practical design notes not found in the standalone manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E16A-AUT - ARM Cortex-M0+ 48MHz 64KB Flash MCU | Microchip
ATSAMD20E16A-AUT

ATSAMD20E16A-AUT - ARM Cortex-M0+ 48MHz 64KB Flash MCU | Microchip

The Microchip ATSAMD20E16A-AUT is a 32-bit ARM Cortex-M0+ based flash microcontroller operating at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) package. Part of the SAM D20E family, it targets low-power, high-performance embedded designs in home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals. The ARM Cortex-M0+ is a 32-bit processor core optimized for energy efficiency and deterministic interrupt response, sitting within the ARM Cortex-M family hierarchy. The SAM D20E line is a sub-family of Microchip's SAM family, a broader portfolio that includes Cortex-M0+, M3, M4, and M7 variants. Within power-management ICs and embedded processors, the SAM D20E serves as a low-power general-purpose controller bridging 8-bit AVR/PIC designs to 32-bit ARM. Key features include up to 48 MHz CPU clock, 64 KB Flash / 8 KB SRAM, six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 12-bit ADC up to 350 ksps, a 10-bit DAC, and full-speed USB 2.0 device support on selected variants. Peripherals also include six 16-bit timer/counters, an RTC, and a peripheral event system. Multiple sleep modes (IDLE, STANDBY, BACKUP) keep active current low for battery-driven products. The device integrates a 2-channel DMA controller and uses Microchip's Atmel START / MPLAB X / Harmony code-generation framework. The Cortex-M0+ core uses the Thumb-2 instruction subset and offers single-cycle I/O access for deterministic GPIO toggling, important for LED control, sensor readout, and motor signaling loops. Typical applications include home automation sensor nodes, smart metering endpoints, IoT edge nodes, low-power consumer devices, industrial sensor conditioning, and human-machine interface (HMI) controllers. The 32-pin TQFP footprint is compact enough for space-constrained designs yet large enough for hand-solderable prototyping. When designing, choose between 1.8V, 2.5V, and 3.3V operation by selecting the appropriate regulator mode; decouple VDDCORE and VDDIO with 100 nF X7R ceramics placed within 3 mm of each pin. Unused SERCOM pads should be left floating or terminated to avoid current leakage. This page consolidates distributor pricing, same-family drop-in alternatives, and practical engineering notes that supplement the manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E16A-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16A-MNT

ATSAMD20E16A-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-MNT is a low-power, high-performance 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, operating up to 48MHz with 64KB of flash memory and 8KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package. The device integrates 64KB program flash, 8KB SRAM, and the Cortex-M0+ core that delivers 2.14 CoreMark/MHz, enabling efficient deterministic processing for embedded control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The SAM D20 family sits within Microchip's ARM Cortex-M0+ portfolio, positioned as a low-power general-purpose MCU hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit microcontroller -> embedded MCU -> semiconductor. The ATSAMD20E16A-MNT belongs to the SAM D20E sub-family, which targets compact 32-pin designs requiring balanced performance, low active and sleep current, and rich peripheral integration. Key features include a 48MHz maximum CPU clock, 1.62V to 3.63V operating voltage range, six SERCOM modules (each configurable as UART, SPI, or I2C), 10-bit ADC and DAC, 16-bit timers, RTC, and full-speed USB device support. The integrated event system and peripheral touch controller (PTC) enable responsive sensor and user-interface implementations without burdening the CPU. Technically, the device achieves 2.14 CoreMark/MHz efficiency typical of the Cortex-M0+ architecture, with single-cycle I/O access and a low-latency interrupt controller. The 32-VQFN package (5x5 mm) exposes 24 GPIO lines with peripheral multiplexing, supports -40C to +105C industrial operating range (per the MNT suffix), and uses an exposed pad for thermal dissipation. Typical applications include home automation endpoints, smart metering, industrial sensor nodes, consumer electronics with touch UI, and low-power IoT devices. The combination of six SERCOM instances, USB device, and ADC/DAC on-chip reduces external component count. When designing with this part, verify that the 32-VQFN exposed pad is soldered to a sufficient copper pour for thermal and electrical grounding. Use Microchip's Atmel Studio / MPLAB X IDE with the ASF or Harmony 3 frameworks for peripheral configuration; legacy code targeting the ATSAMD20 series is broadly portable across the family.

見積もり お問い合わせ
ATSAMD20E16A-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16A-MU

ATSAMD20E16A-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16A-MU is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in a 32-pin VQFN (5x5 mm) package. It is part of the SAM D20E family of low-power, high-performance flash MCUs targeted at home automation, consumer, metering, and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), and a rich set of peripherals on one die. The ARM Cortex-M0+ is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive embedded applications that still benefit from the Thumb-2 instruction set, deterministic interrupt handling, and a broad ecosystem of tools and middleware. The SAM D20 line extends the Cortex-M0+ with Microchip's peripheral set and an event system, placing this part in the wider hierarchy of microcontroller -> embedded processor -> semiconductor device. Key features include the 48 MHz Cortex-M0+ core (2.14 CoreMark/MHz), 64 KB Flash, 8 KB SRAM, a 12-channel 12-bit 350 ksps ADC, two analog comparators, up to six SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a 16-bit timer/counter, and a real-time clock. The device operates from 1.62 V to 3.63 V and includes a sophisticated SleepWalking peripheral event system that lets the CPU remain in deep sleep while peripherals autonomously wake on external events. The 32-VQFN package has an exposed thermal pad for improved dissipation in continuous-active designs. Architecturally, the ATSAMD20E16A uses Microchip's proprietary low-power process and integrates an on-chip voltage regulator and brown-out detector. The peripheral event system (EVSYS) routes peripheral triggers without CPU intervention, and the SERCOM modules can be software-configured for asynchronous or synchronous serial protocols, providing design flexibility not common in fixed-function MCUs. Typical applications include battery-powered IoT sensor nodes, smart-home wireless gateways, portable medical monitoring accessories, industrial HMI panels, HVAC controllers, and USB device peripherals. The 64 KB Flash and 8 KB SRAM fit BLE stack + application + bootloader architectures common in modern connected products. When designing with this part, choose decoupling per the datasheet (typically 100 nF plus 1 uF bulk near VDD pins), assign unused GPIO as input with internal pull enabled, and use the on-chip brown-out detector plus the Watchdog Timer (WDT) for fail-safe recovery. The SAM D20 family shares the Atmel/Microchip Studio (MPLAB X) IDE and Atmel START framework for code generation. This page synthesizes distributor pricing, drop-in same-family alternatives, application examples, and design notes that complement the manufacturer datasheet with practical purchasing and selection context for embedded engineers.

見積もり お問い合わせ
ATSAMD20E16B-AN - 64KB Flash Cortex-M0+ MCU | Microchip | TQFP-32
ATSAMD20E16B-AN

ATSAMD20E16B-AN - 64KB Flash Cortex-M0+ MCU | Microchip | TQFP-32

The Microchip Technology ATSAMD20E16B-AN is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, delivering up to 48 MHz CPU performance with 64 KB of flash and 8 KB of SRAM in a 32-pin TQFP package. It operates from 1.62 V to 3.63 V across industrial temperature ranges, features 26 general-purpose I/O pins, and integrates rich serial connectivity including I2C, SPI, and UART/USART peripherals. The device also includes a 12-bit ADC, 10-bit DAC, multiple timers, brown-out detection, power-on reset, and a watchdog timer. An ARM Cortex-M0+ microcontroller is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive embedded applications that require deterministic real-time response and ultra-low power consumption. Within the broader taxonomy, the ATSAMD20E16B-AN belongs to the microcontroller hierarchy: ARM Cortex-M0+ core -> 32-bit MCU -> embedded microcontroller -> integrated circuit -> semiconductor. Microchip's SAM D20 family specifically targets low-power, high-performance designs in consumer, industrial, and IoT markets where battery life and code density are critical. Key features of the ATSAMD20E16B-AN include a 48 MHz maximum CPU clock with single-cycle I/O access, 64 KB in-system programmable flash with error correction, 8 KB SRAM, a 12-channel 12-bit ADC with up to 1 MSPS sampling, a 10-bit 350 kSPS DAC, six SERCOM modules for configurable serial communication, and a peripheral touch controller supporting capacitive sensing without external components. The B revision adds a force external reset pin and a DMA controller for efficient data movement between peripherals and memory. Architecturally, the ATSAMD20E16B-AN uses the Cortex-M0+ core with a von Neumann bus structure, hardware single-cycle multiplication, and the ARMv6-M Thumb instruction set. It integrates Microchip's Event System for low-latency peripheral signaling without CPU intervention, and the Sleepwalking technology that allows peripherals to operate during deep sleep modes without waking the CPU, achieving standby current below 1 uA. These features position it between simple 8-bit MCUs and higher-end Cortex-M3/M4 devices, balancing performance, power, and cost. Typical applications include home automation nodes, smart sensor hubs, consumer electronics HMI panels, low-cost metering devices, and industrial control peripherals. The wide operating voltage range and AEC-Q100 qualified Extended temperature grade make it suitable for automotive sub-systems, building automation, and battery-powered IoT edge nodes requiring years of operation from a single cell. The compact TQFP-32 package is ideal for space-constrained PCB layouts where breadboard-friendly DIP alternatives are not required. When designing with this device, ensure decoupling capacitors are placed within 5 mm of each supply pin per Microchip's SAMD20 datasheet guidelines. The SAM D20's SERCOM peripheral is highly configurable and each instance must be explicitly software-mapped to specific I/O pins before use; forgetting this step is a common source of 'silent' failures on first prototypes. This page synthesizes distributor pricing, parameter-comparison alternatives within the SAM D20 family, and practical design notes that complement - but do not replace - the official Microchip datasheet.

見積もり お問い合わせ
ATSAMD20E16B-AU - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, TQFP-32 | Microchip
ATSAMD20E16B-AU

ATSAMD20E16B-AU - 32-bit ARM Cortex-M0+ MCU, 64KB Flash, TQFP-32 | Microchip

The Microchip Technology ATSAMD20E16B-AU is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, operating at up to 48 MHz with 64 KB of Flash and 8 KB of SRAM, housed in a 32-pin TQFP (7x7 mm) package. It integrates a peripheral touch controller supporting up to 256 channels, a 12-bit ADC, a 10-bit DAC, a full-speed USB 2.0 device controller, and multiple serial interfaces including SERCOM, I2C, SPI, and UART, making it a versatile SoC for connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, optimized for deterministic interrupt response and ultra-low power operation, enabling battery-powered devices that wake quickly, execute brief tasks, and return to sleep. The SAM D20 family extends this with Microchip's proprietary low-power techniques and an event system that lets peripherals trigger each other without CPU involvement. Key specifications of the ATSAMD20E16B-AU include a 1.62 V to 3.63 V supply range, six SERCOM channels configurable as I2C/SPI/UART, six timer/counter instances, a real-time clock, an integrated 32 kHz oscillator, and a full-speed USB 2.0 device port. The 12-bit ADC delivers up to 350 ksps with hardware oversampling to 16-bit effective resolution, while the 10-bit DAC supports waveform generation. The 256-channel peripheral touch controller (PTC) enables robust capacitive touch interfaces without external components. Architecturally, the device uses a single-cycle I/O bus for deterministic GPIO access, an event system for inter-peripheral signaling, and SleepWalking peripherals that can wake the CPU only when meaningful data is present. This combination yields active currents under 4 mA at 48 MHz and deep-sleep currents below 5 microamperes with RTC retention, qualifying it for energy-harvesting and coin-cell designs. Typical applications include home automation nodes, smart metering endpoints, consumer Human-Machine Interface (HMI) with capacitive touch, industrial sensor transmitters, USB HID peripherals, and low-power wireless sensor hubs pairing with sub-GHz or BLE modules. Its blend of analog integration, USB, and touch makes it a strong single-chip solution when bill-of-materials cost and PCB area are critical. When designing with this device, ensure the VDDCORE pin is decoupled with a 1 uF X7R ceramic capacitor close to the package, and use the on-chip voltage regulator in normal mode rather than bypassing it. Decoupling the USB VBUS pin with 4.7 uF and adding 90-ohm differential impedance-controlled traces on D+/D- are mandatory for USB compliance. The B variant adds an enhanced PTC and improved ADC; firmware written for ATSAMD20E16A rev A silicon may need migration to the latest ASF4 / MCC peripheral drivers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for part selection, sourcing, and PCB bring-up.

見積もり お問い合わせ
ATSAMD20E16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-AUT

ATSAMD20E16B-AUT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16B-AUT is a 32-bit ARM Cortex-M0+ flash microcontroller from the SAM D20E family, delivering up to 48 MHz CPU performance with 64 KB of Flash and 8 KB of SRAM in a 32-pin TQFP (7x7 mm) industrial-temperature package. It integrates a single-cycle hardware multiplier, a 12-bit 350 ksps ADC, a 10-bit 350 ksps DAC, up to six SERCOM serial communication modules, a 16-bit timer/counter, a Real-Time Clock (RTC), and a 256-channel Peripheral Touch Controller (PTC) for capacitive touch sensing. The part operates from 1.62 V to 3.6 V supply, supporting both battery-powered and 3.3 V regulated rails. What is a Cortex-M0+ microcontroller? A microcontroller unit (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The ARM Cortex-M0+ is the most energy-efficient core in the Cortex-M family, designed for 32-bit performance at minimal power and cost. MCUs sit within the embedded-computing hierarchy alongside microprocessors, FPGAs, and DSPs, and form the decision-making brain of nearly every connected sensor node, consumer appliance, and industrial control loop. Key features of the ATSAMD20E16B-AUT include: six SERCOM channels configurable as UART, SPI, or I2C, an Event System for hardware-triggered inter-peripheral signalling, SleepWalking peripherals that wake the CPU only on relevant events, and full-speed USB device via the integrated USB 2.0 Full-Speed controller. The 12-bit ADC offers up to 16 channels and the PTC supports up to 256 mutual-capacitance touch buttons without external components. Architecture-wise, the device combines a two-wire SERCOM-based interconnect, a single-cycle multiplier and a 4-channel DMA controller that offloads memory-to-peripheral transfers, freeing the Cortex-M0+ core for application code. The embedded voltage regulator and power-on reset reduce external component count. Typical applications include home-automation sensor hubs, low-power consumer devices, smart metering, capacitive touch user interfaces, industrial sensor nodes, and battery-powered IoT endpoints. The integrated USB and touch peripherals specifically suit HIDs, USB-CDC bridges, and white-goods control panels. Design consideration: the internal 1.62 V regulator requires a 1 uF decoupling capacitor on VDDIN and a 1 uF on VDDANA; bypassing both with a 100 nF high-frequency cap prevents ADC reference noise during SERCOM bursts. This page synthesizes distributor pricing, parametric comparison, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

見積もり お問い合わせ
ATSAMD20E16B-MN - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MN

ATSAMD20E16B-MN - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip ATSAMD20E16B-MN is a low-power, high-performance ARM Cortex-M0+ based flash microcontroller housed in a 32-pin VQFN (5x5 mm) package. It operates at up to 48 MHz, integrates 64 KB of Flash and 8 KB of SRAM, and supports a wide 1.6 V to 3.6 V supply range. The device targets home automation, consumer, metering, and industrial applications. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ is an ultra-low-power 32-bit processor core optimized for energy-efficient embedded designs. Microcontrollers (MCUs) such as the SAM D20 family integrate the Cortex-M0+ CPU with Flash, SRAM, peripherals, and a power management subsystem on a single die. Within the power-management hierarchy, the SAM D20E sits below the Cortex-M0+ family, within Microchip's SAM D20 product line, and ultimately within the broader 32-bit MCU category of integrated circuits. Key features include a Serial Communication Interface (SERCOM) module configurable as UART/USART, SPI, or I2C, a 12-bit Analog-to-Digital Converter (ADC), a 10-bit Digital-to-Analog Converter (DAC), and multiple 16-bit timer/counters. The 32-VQFN package with exposed pad provides a low thermal resistance path suitable for space-constrained designs. The part carries the -MN industrial temperature grade suffix, supporting operation from -40C to +105C. The ATSAMD20E16B-MN leverages Microchip's proprietary low-power picoPower technology, providing multiple sleep modes with sub-microamp quiescent current and fast wake-up times. The Cortex-M0+ core implements the ARMv6-M Thumb instruction set with a single-cycle I/O port for deterministic GPIO access. The peripheral event system allows inter-peripheral signalling without CPU intervention, reducing firmware complexity and power. Typical applications include wireless sensor nodes, smart home devices, low-cost industrial controllers, battery-powered metering, and consumer electronics with USB or capacitive touch interfaces. The wide operating voltage range allows direct Li-ion or 2x AA battery connection without external regulation. When designing with this MCU, ensure adequate decoupling (100 nF plus 1 uF bulk) is placed near each VDD pin, and that the exposed thermal pad is soldered to a continuous ground plane for thermal and electrical performance. The SERCOM modules require careful pin-mux configuration via the PORT and PMUX registers before use. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes - all in one place for engineers evaluating the ATSAMD20E16B-MN for low-power embedded designs.

見積もり お問い合わせ
ATSAMD20E16B-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MNT

ATSAMD20E16B-MNT - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip ATSAMD20E16B-MNT is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package with an exposed thermal pad. It targets low-power, high-performance embedded designs in home automation, consumer, metering, and industrial segments. According to the Microchip product page, the device operates from 1.62 V to 3.63 V across a -40 C to +105 C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The Cortex-M0+ is ARM's smallest and most energy-efficient core, well suited to deterministic real-time control. The SAM D20 family sits within Microchip's broader portfolio of Cortex-M0+ parts: SAMD20 -> Cortex-M0+ MCU -> 32-bit MCU -> microcontroller -> embedded processor. This taxonomy positions it between 8-bit AVR/PIC parts (lower performance, lower power) and Cortex-M4/M7 parts (higher performance, higher power). Key features of the ATSAMD20E16B-MNT include six SERCOM (Serial Communication Interface) modules that can be independently configured as UART, SPI, or I2C, a 12-bit ADC with up to 16 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), and a full-function RTC with calendar mode. The device supports up to 26 GPIO pins and embeds a 32 kHz low-power oscillator for accurate sleep-mode timing. Architecturally, the SAM D20E uses single-cycle hardware multiplication, a Nested Vectored Interrupt Controller (NVIC), and Microchip's proprietary Sleepwalking peripheral logic that allows the CPU to stay in deep sleep while peripherals react to events, waking only when needed. This architecture is what enables the device's typical active current in the microampere range when peripherals are clock-gated. Typical applications include smart-home sensor nodes, low-power wireless MCUs paired with sub-GHz transceivers, industrial metering front-ends, consumer appliances, and battery-powered IoT endpoints. The combination of 64 KB Flash and 8 KB SRAM comfortably supports small RTOS-based designs and over-the-air (OTA) bootloaders when paired with an external flash. When designing with the ATSAMD20E16B-MNT, plan the SERCOM assignment matrix early - each of the six SERCOM channels can be software-mapped to multiple pin sets, so pad layout choices determine which peripheral combinations are available. Designers should also budget for the 32 kHz crystal footprint even if the internal 32 kHz oscillator is used initially. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for BOM, sourcing, and PCB layout decisions.

見積もり お問い合わせ
ATSAMD20E16B-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAMD20E16B-MU

ATSAMD20E16B-MU - 48MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAMD20E16B-MU is an ARM Cortex-M0+ based 32-bit flash microcontroller (MCU) from the SAM D20E family, delivering up to 48 MHz CPU clock speed with 64 KB of flash memory and 8 KB of SRAM, housed in a 32-pin VQFN (5x5 mm) package with an exposed pad for improved thermal dissipation. It integrates a single-cycle hardware multiplier, single-cycle 32-bit I/O interface, and a full Cortex-M0+ debug architecture with configurable pin mapping via the SERCOM peripheral. What is an ARM Cortex-M0+ microcontroller? An ARM Cortex-M0+ MCU is an ultra-low-power 32-bit processor core from Arm designed for embedded applications that demand deterministic real-time response, low energy consumption, and a small silicon footprint. Within the broader taxonomy it sits as a microcontroller (MCU) -> 32-bit MCU -> ARM Cortex-M microcontroller -> Cortex-M0+ class. The ATSAMD20E16 belongs to Microchip's SAM D20 family, which positions it as a low-power, high-performance general-purpose MCU for consumer, industrial, and IoT edge nodes. Key features of the ATSAMD20E16B-MU include 64 KB (64K x 8) of embedded flash program memory, 8 KB of SRAM, four SERCOM (serial communication interface) instances that can each be independently configured as UART/SPI/I2C, a 12-bit ADC, two analog comparators, two brown-out detectors (BOD), power-on reset (POR), a real-time clock (RTC), watchdog timer (WDT), and six timer/counter instances. The device supports Sleep, Idle, and Standby low-power modes enabling deep sub-microamp sleep currents for battery applications. Architecturally, the ATSAMD20E16B-MU uses a single-cycle 32-bit bus matrix with separate AHB and APB bridges, giving deterministic latency on GPIO and peripheral access. The 48 MHz Cortex-M0+ core pairs with a tightly-coupled flash controller that reduces wait states on contiguous code execution, while the SERCOM blocks re-use the same silicon for I2C, SPI, or USART through a flexible pin-mux, which lets designers reassign peripherals at PCB bring-up without changing the BOM. Typical applications include home automation nodes, smart metering, industrial sensor conditioning, low-power wearables, USB human-interface devices, and consumer electronics requiring Bluetooth or sub-GHz companion chips. The wide 1.62-3.63 V VDD range lets it operate from a single Li-ion cell or two AA cells directly. When designing with this part, route the exposed pad (EP) to a continuous ground plane with thermal vias for EMI and thermal performance, and use Atmel Studio 7 or Microchip Studio with the DFP (device family pack) to configure the SERCOM peripheral multiplexing. This page synthesizes distributor pricing, drop-in alternatives within the SAM D20 family, and practical design notes not consolidated on the manufacturer product page.

見積もり お問い合わせ
ATSAMD20E17A-AN - ARM Cortex-M0+ 48MHz 128KB Flash MCU | Microchip
ATSAMD20E17A-AN

ATSAMD20E17A-AN - ARM Cortex-M0+ 48MHz 128KB Flash MCU | Microchip

The Microchip Technology (formerly Atmel) ATSAMD20E17A-AN is a 32-bit ARM Cortex-M0+ flash microcontroller running up to 48 MHz, integrating 128 KB of Flash and 16 KB of SRAM in a 32-pin TQFP (7x7 mm) package. It is part of the SAM D20E family, optimized for low-power, high-performance home automation, consumer, metering, and industrial applications. According to the Microchip product page, the device supports an operating voltage range of 1.62 V to 3.63 V over -40 C to +105 C, with internal 8 MHz and 32 kHz oscillators plus PLL support. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. Within the broader taxonomy, the ATSAMD20E17A-AN sits at: microcontroller -> embedded processor -> semiconductor device. The ARM Cortex-M0+ core is the smallest and most energy-efficient member of the Cortex-M family, ideal for cost-sensitive and battery-powered designs. Key features include the Cortex-M0+ core with single-cycle I/O access, an 8-channel Event System for inter-peripheral signaling without CPU intervention, a 12-bit 350 ksps ADC with up to 10 analog channels, two analog comparators, and up to six SERCOM (serial communication) interfaces that can each be configured as UART, SPI, or I2C. The device also integrates a 16-bit timer/counter, a 24-bit Real-Time Counter (RTC) with calendar, and full-speed USB 2.0 device support via a separate D- pin (PA24/PA25 require external crystal for USB operation). Typical applications include smart home sensor nodes, IoT edge devices, industrial control and metering, consumer appliances, and low-power wireless companion MCUs. The wide 1.62-3.63 V supply range and dual operating temperature grades (industrial -40 to +85 C and extended -40 to +105 C) make the part suitable for both commercial and harsh-environment deployments. When designing with the ATSAMD20E17A-AN, place decoupling capacitors (100 nF + 1 uF) as close as possible to each VDD pin pair and ensure the exposed pad on the TQFP is soldered to a continuous ground pour for thermal dissipation and low-impedance return paths. The DFLL and PLL require configuration via SAMD20 firmware libraries - leaving them at reset state may limit achievable system clock precision. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E17A-ANT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD20E17A-ANT

ATSAMD20E17A-ANT - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD20E17A-ANT is a 32-bit ARM Cortex-M0+ microcontroller running at up to 48 MHz with 128 KB of Flash and 16 KB of SRAM in a 32-pin TQFP (7x7) package. It operates from 1.62 V to 3.63 V and is rated for industrial temperature range from -40 C to +105 C, making it suitable for harsh-environment applications. What is a Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the most energy-efficient processor in the ARM Cortex-M family, designed for embedded applications requiring low power, deterministic interrupt response, and small code footprint. MCUs in this category are widely used as the main processor in IoT nodes, sensor hubs, consumer appliances, and industrial controllers where 8-bit MCUs can no longer keep up with feature demands but full Cortex-M4 parts are over-budget. The ATSAMD20E17A integrates multiple peripherals that reduce bill-of-materials cost: a 6-channel SERCOM (configurable as UART/SPI/I2C), a 12-bit/350 ksps ADC with up to 10 analog channels, two 16-bit timer/counters, a 32.768 kHz RTC, and a full-speed USB device. The Microchip SleepWalking peripheral allows the ADC, SERCOM, and other blocks to wake the core only when a qualified event occurs, enabling system-level current consumption below 100 uA/MHz in active mode and microamp-level standby currents. Internal architecture uses a 2-channel bus matrix connecting Flash, SRAM, and peripherals to the Cortex-M0+ core via AHB and APB bridges. The Event System (12 channels) lets peripherals trigger each other without CPU intervention, further reducing average active current and enabling deterministic response times. Hardware divide and single-cycle I/O access are key architectural features inherited from the Cortex-M0+ specification. Typical applications include home automation wireless sensor nodes, low-power IoT edge devices, consumer remote controls, smart metering, industrial sensor conditioning, and USB HID peripherals such as keyboards and custom interface devices. The wide operating voltage range suits coin-cell powered designs, while the USB device makes tethered PC peripherals practical without an external PHY. When designing with this part, use the Atmel Studio 7 or MPLAB X IDE with the ASF (Atmel Software Framework) or Harmony 3, and program/debug via SWD using a Microchip debugger. Decouple VDD with at least one 100 nF ceramic capacitor per power pin pair and keep the trace between VDD and the capacitor below 5 mm. This page synthesizes distributor pricing, drop-in alternatives from the SAM D20 family and competitive Cortex-M0+ parts, and practical design notes not found in the manufacturer datasheet summary.

見積もり お問い合わせ
ATSAMD20E17A-AU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAMD20E17A-AU

ATSAMD20E17A-AU - 48MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAMD20E17A-AU is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, integrating 128 KB of Flash and 16 KB of SRAM in a 32-pin TQFP (7x7 mm) package. The device is part of the SAM D20E family, optimized for low-power, high-performance embedded designs. What is an ARM Cortex-M0+ microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, designed for deterministic real-time control with a Thumb-2 instruction subset. MCUs sit at the bottom of the compute hierarchy and are distinct from microprocessors by their integrated memory and peripherals. In the SAM D20E family, the Cortex-M0+ core is paired with the Microchip peripheral set, including SERCOM (configurable serial communication) and Event System for hardware-triggered DMA-like operation without CPU intervention. Key features include 128 KB Flash, 16 KB SRAM, 48 MHz maximum clock, an 8-channel 12-bit ADC, 10-bit DAC, up to six SERCOM interfaces configurable as UART/SPI/I2C, and a full-speed USB 2.0 device. The peripheral touch controller (PTC) supports capacitive touch sensing, and the Event System enables deterministic inter-peripheral signaling. Typical applications span home automation, consumer electronics, smart metering, industrial control, and IoT edge nodes where low power consumption, small footprint, and rich connectivity are required. The 32-TQFP package supports hand-solderable prototyping and standard SMT assembly lines. Design consideration: the SAM D20E requires careful clock configuration to balance CPU performance against quiescent current; sleep modes with RTC running can drop consumption to single-digit microamps. Use Atmel Studio / MPLAB X IDE with the ASF or Harmony 3 framework for driver support. This page synthesizes distributor pricing, pin-compatible SAM D20 family drop-ins, and practical design notes not collected in any single manufacturer document.

見積もり お問い合わせ
ATSAMD20E17A-AUT - Cortex-M0+ MCU 48MHz 128KB | Microchip
ATSAMD20E17A-AUT

ATSAMD20E17A-AUT - Cortex-M0+ MCU 48MHz 128KB | Microchip

The Microchip ATSAMD20E17A-AUT is an ARM Cortex-M0+ based 32-bit flash microcontroller (SAM D20E family) operating at up to 48 MHz, integrating 128 KB of Flash and 16 KB of SRAM in a 32-pin TQFP (7x7 mm) package. It belongs to the low-power, high-performance SAM D20 family from Microchip (formerly Atmel) and targets home automation, consumer, metering, and industrial applications. The device pairs a deterministic Cortex-M0+ pipeline with Microchip's peripheral touch controller and SERCOM serial framework. What is a Cortex-M0+ microcontroller? A microcontroller (MCU) is a single-chip computer integrating CPU, memory (Flash for code, SRAM for data), and peripherals on one die. The Cortex-M0+ is ARM's smallest, most energy-efficient 32-bit core, optimized for deterministic interrupt response and ultra-low active current. An MCU like the ATSAMD20E17A-AUT sits in the system hierarchy as: embedded controller -> microcontroller -> 32-bit MCU -> Cortex-M0+ MCU. It differs from a microprocessor (MPU) by being self-contained without external memory buses. Key features include 128 KB Flash, 16 KB SRAM, 48 MHz core clock, an 8-channel 12-bit ADC, two Analog Comparators, up to 26 GPIO, six SERCOM modules (configurable as UART, SPI, or I2C), and the Peripheral Touch Controller supporting up to 256 buttons. The device also integrates a full-speed USB 2.0 device interface, an RTC, and SleepWalking peripherals that allow the CPU to stay asleep while peripherals autonomously service events. Architecturally the ATSAMD20E17A-AUT uses a single-cycle hardware multiply, the Microchip Event System for inter-peripheral signaling without CPU wake-up, and a 6-channel DMA engine. The 1.62V-3.63V wide supply range covers single-cell Li-ion and coin-cell operation, while built-in FPU-less Cortex-M0+ keeps the active current under 70 uA/MHz. Typical applications include smart-home sensor hubs, IoT edge nodes, BLE front-ends (paired with an ATBTLC1000 or ATSAM R34 module), HVAC controllers, industrial sensor transmitters, USB HID peripherals, and low-cost brushed DC motor control via a companion ATA6826 driver. The wide voltage range and low sleep current also suit battery-powered metering. When designing with this MCU, allocate the SERCOM channels early in the firmware architecture because each channel can only be bound to one of UART/SPI/I2C at a time. The 32-pin TQFP variant limits GPIO to 26 pins compared to the 48-pin variant, so plan pin counts accordingly. This page synthesizes Microchip datasheet data, distributor pricing tiers, and practical design notes not available on the OEM summary, giving engineers a single reference for vendor selection and PCB bring-up of the ATSAMD20E17A-AUT.

見積もり お問い合わせ
ATSAMD20E17A-MN - 128KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD20E17A-MN

ATSAMD20E17A-MN - 128KB Flash ARM Cortex-M0+ MCU | Microchip

The Microchip ATSAMD20E17A-MN is a 32-bit ARM Cortex-M0+ based flash microcontroller with 128KB of Flash and 16KB of SRAM, operating at up to 48MHz from a 1.62V to 3.6V supply in a 32-pin VQFN (5x5 mm) package. It is part of the SAM D20E family designed for low-power, high-performance embedded applications. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on a single die. The Cortex-M0+ is the most energy-efficient ARM processor core, offering Thumb-2 instruction set compatibility and a 2.14 CoreMark/MHz performance figure. Within the broader taxonomy, this device is a Flash microcontroller -> embedded MCU -> 32-bit microcontroller -> semiconductor. Compared to 8-bit MCUs like the PIC16F series, the Cortex-M0+ offers higher computational throughput, deterministic interrupts via the Nested Vectored Interrupt Controller (NVIC), and modern peripherals such as SERCOM configurable serial interfaces. Key features of the ATSAMD20E17A-MN include six SERCOM interfaces (each configurable as UART, SPI, or I2C), a 12-bit 1 MSPS ADC with up to 10 analog channels, two 16-bit Timer/Counters (TC), a 32-bit Real-Time Counter (RTC) with calendar mode, a full-speed USB 2.0 device interface, and an Event System for inter-peripheral signaling without CPU intervention. The device supports up to 26 programmable I/O pins. The SAM D20 architecture uses a single-cycle hardware multiplier and a 2-layer AHB-Lite bus matrix, giving 2.14 CoreMark/MHz. The Peripheral Touch Controller (PTC) supports capacitive touch buttons, sliders, and wheels. A low-power SleepWalking peripheral can wake the CPU only when meaningful data is present, enabling battery-friendly idle states as low as a few microamperes in deep-sleep modes. Typical applications include home automation nodes, smart metering endpoints, consumer electronics, low-cost sensor hubs, and industrial control peripherals. The wide 1.62-3.6V operating range and 105C extended-industrial temperature option also suit rugged environments. When designing with this device, pay attention to decoupling (place 100nF and 1uF capacitors within a few millimeters of each VDD pin) and consider whether the 5x5 mm QFN land pattern is acceptable for your manufacturing process. The PTC touch channels overlap with the ADC, so verify pin allocation before locking the BOM. This page synthesizes distributor pricing, drop-in alternates within the SAM D20 family, and practical design notes that are not aggregated on the manufacturer datasheet alone, helping engineers accelerate their selection.

見積もり お問い合わせ
ATSAMD20E18A-ANT - ARM Cortex-M0+ MCU 48MHz 256KB TQFP-32
ATSAMD20E18A-ANT

ATSAMD20E18A-ANT - ARM Cortex-M0+ MCU 48MHz 256KB TQFP-32

The Microchip Technology ATSAMD20E18A-ANT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20E family, delivering 48 MHz CPU performance with 256 KB Flash and 32 KB SRAM in a 32-pin TQFP (7x7 mm) package. It operates from 1.6 V to 3.6 V and is qualified to 105 degrees C, making it well suited to industrial and consumer environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication interfaces, and analog-to-digital converters. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M family, optimized for deterministic, low-power embedded workloads. As part of the broader hierarchy MCU -> embedded controller -> system-on-chip -> semiconductor, the ATSAMD20E18A-ANT sits at the entry-level Cortex-M tier but still offers substantial compute density for sensor hubs, human-machine interfaces, and protocol bridges. Key differentiating specifications include the Cortex-M0+ core at 48 MHz with single-cycle GPIO access, 256 KB self-programmable Flash, 32 KB SRAM, a 12-bit 350 ksps ADC with up to 16 analog channels, a 10-bit DAC, a 32-bit RTC, and a 256-channel Peripheral Touch Controller (PTC) that supports capacitive touch buttons, sliders, and proximity sensors without external components. The integrated SERCOM module provides up to six configurable serial interfaces that can each operate as I2C, SPI, or USART, dramatically simplifying BOM optimization. Architecturally, the device uses the Cortex-M0+ v6-M instruction set with hardware multiply and divide, NVIC with 4 priority levels, and a low-power SleepWalking peripheral event system that wakes only the peripherals needed for a task while keeping the core asleep. This combination, together with typical active current of approximately 70 uA/MHz, places the part in Microchip's low-power performance tier. Typical applications include home automation control nodes, smart metering, capacitive touch user interfaces, wireless sensor transceivers paired with modules such as ATSAMR21, industrial sensor hubs, and consumer appliances. The wide 1.6-3.6 V supply range simplifies single-Li-ion or 3.3 V system design. When designing with this part, allocate sufficient decoupling near each VDD pin and follow the 32-pin TQFP land pattern recommendations in the datasheet to maintain ADC accuracy. This page synthesizes verified distributor pricing, drop-in alternatives, application notes, and PCB design considerations not found in the manufacturer datasheet alone.

見積もり お問い合わせ
ATSAMD20E18A-AU - ARM Cortex-M0+ MCU 256KB Flash 32-TQFP | Microchip
ATSAMD20E18A-AU

ATSAMD20E18A-AU - ARM Cortex-M0+ MCU 256KB Flash 32-TQFP | Microchip

The Microchip Technology ATSAMD20E18A-AU is a 32-bit ARM Cortex-M0+ based flash microcontroller from the SAM D20E family, delivering 48 MHz core performance with 256 KB Flash and 32 KB SRAM in a 32-pin TQFP (7x7 mm) package. The device operates from a 1.62 V to 3.63 V supply and includes up to 26 programmable I/O pins, a 12-channel SERCOM (serial communication) subsystem, a 12-bit 350 ksps ADC, and a 10-bit 350 ksps DAC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), and a rich set of peripherals on one die. The Cortex-M0+ sits at the lowest-power end of the ARM Cortex-M family tree, optimized for deterministic interrupt response at minimal energy cost. MCUs belong to the broader embedded controller hierarchy - faster than 8/16-bit legacy microcontrollers but simpler than microprocessors, and form a subset of integrated circuits used in virtually all digital products. Key features of the ATSAMD20E18A-AU include the Microchip proprietary Atmel START / MPLAB X IDE support, a 32 KB SRAM with a tightly-coupled bus for low-latency access, a full-speed USB 2.0 device with on-chip transceiver, and a peripheral touch controller (PTC) supporting capacitive buttons, sliders, and wheels. The integrated sleepwalking peripheral event system allows peripherals to wake the core only when needed, enabling deep Sleep mode currents below 10 µA. The architecture uses a single 32-bit AHB-Lite bus with a separate bridge for low-power peripherals, and the Cortex-M0+ implements the ARMv6-M Thumb instruction set. A hardware multiplier (32-bit result in one cycle) and configurable NVIC (Nested Vectored Interrupt Controller) with up to 32 IRQs give the part real-time responsiveness uncommon in entry-level MCUs. Typical applications include home automation nodes, low-cost consumer devices, smart energy metering, industrial sensor hubs, and capacitive-touch user interfaces. The wide 1.62 V to 3.63 V range supports direct connection to single-cell Li-ion (3.7 V nominal) and 3.3 V regulated rails without level shifters. When designing with this part, decouple VDDIN and VDDCORE with 100 nF plus 4.7 µF bulk capacitors placed within 5 mm of the pins. Use the SERCOM peripheral (not legacy USART/SPI/I2C) and route D+ / D- differential traces with 90 Ω impedance if USB is enabled. This page synthesizes distributor pricing from DigiKey, Mouser, Heisener, LCSC, and Octopart; same-package drop-in alternatives from the Microchip SAMD20 family; and practical design notes not consolidated in the manufacturer datasheet.

見積もり お問い合わせ
ATSAMD20E18A-AUT - 48MHz Cortex-M0+ 256KB Flash MCU | Microchip
ATSAMD20E18A-AUT

ATSAMD20E18A-AUT - 48MHz Cortex-M0+ 256KB Flash MCU | Microchip

The Microchip Technology ATSAMD20E18A-AUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM D20E family, featuring 256KB of flash memory, 32KB of SRAM, and a 48 MHz core clock in a 32-pin TQFP (7x7 mm) package. It integrates a 12-bit ADC, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC), a full-featured RTC, and multiple SERCOM modules for flexible serial communication. A Cortex-M0+ microcontroller (MCU) is a low-power 32-bit processor core from the ARM Cortex-M family, designed for energy-efficient embedded applications. It sits in the hierarchy: ARM Cortex-M0+ -> Cortex-M series -> 32-bit RISC microcontroller -> embedded processor -> semiconductor. Cortex-M0+ cores target cost-sensitive IoT, sensor, and consumer devices that need 32-bit performance at 8-bit price points, with deterministic interrupt handling and a thumb-only instruction set for compact code density. Key features of the ATSAMD20E18A-AUT include a 1.6V to 3.6V supply range, 6 SERCOM channels that can each operate as USART, I2C, or SPI, a 12-channel 12-bit ADC with 350 ksps sampling, a 10-bit 350 ksps DAC, and full USB 2.0 Full-Speed device support with on-chip transceiver. The device also offers 6 event channels for inter-peripheral signalling without CPU intervention, an idle/standby power-down mode that drops current to a few microamps, and a built-in 32 kHz RTC oscillator with calendar mode. Architecturally, the part uses an M0+ core with a single-cycle hardware multiplier and a Nested Vectored Interrupt Controller (NVIC). The flash controller supports in-application programming, and the device is supported by Atmel/Microchip Studio, MPLAB X IDE, and the Harmony framework, easing firmware porting. The 32-pin TQFP (AUT - tape-and-reel packaging, 'U' indicating industrial temperature grade) offers easy hand-solder-friendly prototyping. Typical applications include home automation nodes, smart sensor hubs, low-power wireless MCU companions, industrial metering and control, consumer electronics human-interface devices, and battery-powered IoT endpoints. The integrated PTC enables robust touch-button, slider, and wheel interfaces without external touch ICs, making the part especially attractive for appliance front panels. When designing with this part, choose a 32.768 kHz crystal for RTC accuracy and add a 1uF + 0.1uF decoupling pair close to each VDD pin. For USB applications, route the D+/D- lines as a 90-ohm differential pair and tie VBUS to the USB VBUS pad through a voltage divider. The -AUT suffix denotes tape-and-reel packaging and industrial (-40C to +85C) temperature grade. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes - all derived from the Microchip datasheet family and verified web sources - that go beyond the bare datasheet content to support faster engineering decisions.

見積もり お問い合わせ
ATSAMD20E18A-MNT - 256KB Flash ARM Cortex-M0+ MCU | Microchip
ATSAMD20E18A-MNT

ATSAMD20E18A-MNT - 256KB Flash ARM Cortex-M0+ MCU | Microchip

The Microchip Technology ATSAMD20E18A-MNT is a 32-bit ARM Cortex-M0+ flash microcontroller delivering up to 48 MHz CPU performance in a 32-pin VQFN (MNT) package with exposed pad. It integrates 256 KB of Flash program memory and 32 KB of SRAM, providing generous headroom for embedded firmware, protocol stacks, and sensor-fusion code in space-constrained designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals. The ARM Cortex-M0+ is the smallest and most energy-efficient ARM core, optimized for low-power deterministic interrupt response, while the SAM D20E series adds Microchip-specific peripherals, power management, and an event system. Within the broader taxonomy, the ATSAMD20 sits between 8-bit AVR/PIC MCUs and higher-performance Cortex-M3/M4 parts, making it the canonical choice for cost-sensitive, battery-powered, sensor-centric products. Key features of the ATSAMD20E18A-MNT include 6 SERCOM (serial communication) interfaces configurable as I2C/SPI/UART, a 12-bit 350 ksps ADC with up to 20 channels, a 10-bit DAC, a 256-channel Peripheral Touch Controller (PTC) for capacitive buttons and sliders, and a full-speed USB 2.0 device port. The integrated event system allows peripherals to trigger one another without CPU intervention, freeing the Cortex-M0+ core for application logic and reducing active current. Technically, the device operates from 1.62 V to 3.63 V, supports Sleep, Idle, Standby, and Backup sleep modes with sub-microamp standby current, and includes a 32.768 kHz RTC with calendar. The Cortex-M0+ core reaches 2.14 CoreMark/MHz, and the Memory Protection Unit (MPU) helps harden RTOS-based firmware against runaway pointers. Programming is via the integrated Serial Wire Debug (SWD) interface and the Microchip Atmel Studio / MPLAB X toolchain. Typical applications include home automation nodes (HVAC, lighting, smart plugs), industrial sensor transmitters, consumer wearables and fitness bands, low-power wireless sensor nodes (when paired with an AT86RF233 or similar 2.4 GHz radio), capacitive-touch user interfaces, and USB peripherals such as HID controllers. The wide operating voltage and rich analog peripherals make it ideal for battery-powered measurement products. When designing with this part, choose decoupling capacitors per the datasheet (typically one 100 nF per VDD pin) and route SWD signals on inner layers with a ground return path. For best EMC performance, the exposed pad must be soldered to a contiguous ground plane, and unused I/O pins should be configured as outputs low rather than left floating. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design notes not found on the manufacturer datasheet alone, helping engineers shorten the BOM-evaluation cycle for ATSAMD20-based designs.

見積もり お問い合わせ
ATSAMD20E18A-MU - 48MHz ARM Cortex-M0+ 256KB Flash MCU | Microchip
ATSAMD20E18A-MU

ATSAMD20E18A-MU - 48MHz ARM Cortex-M0+ 256KB Flash MCU | Microchip

The Microchip Technology ATSAMD20E18A-MU is a 32-bit ARM Cortex-M0+ microcontroller in the SAM D20E family, featuring 256KB Flash, 32KB SRAM, and a 48MHz CPU, housed in a 32-pin VQFN (5x5 mm) package with an exposed pad. It is built around the Cortex-M0+ core, executes the Thumb-2 instruction set, and integrates a single-cycle hardware multiplier. The device supports 1.62V to 3.63V supply operation and reaches 2.14 CoreMark/MHz, making it suitable for a wide range of performance- and power-sensitive embedded applications. An ARM Cortex-M0+ microcontroller is an entry-level 32-bit MCU that delivers higher code density and energy efficiency than legacy 8-bit/16-bit microcontrollers while retaining a familiar programmer model. Within the product taxonomy, the Cortex-M0+ sits between Cortex-M0 and Cortex-M3 in the ARM Cortex-M family; the SAM D20E specifically belongs to Microchip's SAM D20 series, which is positioned for low-power, general-purpose 32-bit designs spanning home automation, consumer, metering, and industrial control applications. The integration of 256KB Flash and 32KB SRAM in a 5x5 mm VQFN makes the family attractive where code size and PCB area are tight. Key features include 256KB Flash (256K x 8), 32KB SRAM, up to 48MHz CPU clock, an integrated peripheral touch controller (PTC) supporting sliders, buttons, and proximity sensing, and the standard SAM D20 SERCOM module count for I2C, SPI, and UART operation. The part also provides a 12-bit ADC, 10-bit DAC, multiple timers (TC, TCC), and a full-speed USB 2.0 device interface. Typical I/O count for the 32-pin variant supports up to 26 GPIO lines. Architecturally, the device uses a single-cycle hardware multiplier and a tightly coupled memory controller to deliver efficient Cortex-M0+ execution at up to 2.14 CoreMark/MHz. The integrated SleepWalking peripheral event system allows selected peripherals to wake the core only when needed, which contributes to the SAM D20 series' reputation for low standby current and Idle/Standby modes consuming microamp-level current. Typical applications include smart-home sensor hubs, low-power industrial controllers, USB-to-UART bridges, battery-powered metering devices, and human-machine interface (HMI) controllers using touch or segment-LCD fronts. The combination of 256KB Flash and the extended SAM D20 peripheral set is well matched to connected appliances and IoT edge nodes that must run a small RTOS or bare-metal state machine. When designing with this part, confirm that your firmware stack (startup, linker script, and ASF/MPLAB Harmony configuration) targets the SAM D20E variant and the 256KB Flash size. Pay attention to decoupling of the exposed thermal pad for thermal performance, and review the recommended load capacitance on the 32kHz crystal if RTC accuracy is critical. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives from the SAMD20 family, and practical design notes not found on a single manufacturer page - giving procurement, FAE, and design engineers one place to evaluate and substitute ATSAMD20E18A-MU.

見積もり お問い合わせ