マイクロコントローラ

XPC8260VVHFBC

XPC8260VVHFBC - 166MHz 32-Bit PowerPC Processor | NXP

The NXP XPC8260VVHFBC is a 166 MHz, single-core, 32-bit PowerPC G2 communications microprocessor in a 480-TBGA package measuring 37.5 mm by 37.5 mm. Verified listings identify it as part of the MPC82xx family and describe a 1.8 V device with an exposed pad. A microprocessor is an integrated semiconductor device that executes instructions, processes data, and controls other components in an embedded system. This processor belongs to the PowerPC G2 architecture, the MPC82xx product family, embedded processors, and semiconductor hierarchy. Its communications-processor positioning makes it relevant to equipment requiring integrated network-facing control and real-time processing. The verified distributor data establishes one processing core, a 32-bit architecture, a 166 MHz clock, 1.8 V operation, and a 480-ball BGA package. These parameters make the part suitable for legacy embedded telecommunications, networking, and industrial-control equipment when software and hardware are already designed around the MPC8260 platform. Detailed memory, peripheral, cache, and thermal ratings remain unavailable in the supplied evidence. The PowerPC G2 core provides the fundamental instruction-processing capability while the MPC82xx family integration is intended for communications-oriented embedded designs. Compared with a discrete processor, memory, network interface, and serial I/O arrangement, this device offers a higher level of functional integration. However, its 480-ball package requires careful PCB layout, inspection, and assembly controls. Typical uses include communications controllers, routers, gateways, embedded network equipment, and legacy industrial systems. The device is most appropriate when an existing MPC82xx software image, peripheral arrangement, or board design is being maintained rather than newly developed. Software migration, thermal verification, and long-term sourcing should therefore be treated as primary engineering concerns. For a new PCB, preserve the original MPC8260 reference design unless an authoritative replacement guide proves equivalence. Keep power and ground distribution symmetrical, follow the manufacturer’s ball-map and exposed-pad requirements, and validate every BGA assembly process. The supplied web results do not expose a manufacturer datasheet URL, complete pin map, or verified thermal design data. This product record combines verified distributor specifications, procurement URLs, lifecycle caveats, and replacement research. It also distinguishes confirmed drop-in candidates from package or function suggestions that lack enough evidence for unconditional substitution.

見積もり在庫あり

XPC8260VVIFBC

XPC8260VVIFBC - PowerPC G2 MPU 200MHz 480-TBGA | NXP

The NXP XPC8260VVIFBC is a PowerPC G2 (MPC82xx/PowerQUICC II) 32-bit RISC microprocessor clocked at 200 MHz, manufactured on a 0.29 µm CMOS process and packaged in a 480-ball TBGA measuring 37.5 x 37.5 mm. It integrates a single 32-bit PowerPC core with the PowerQUICC II communications engine, targeting telecom, networking, and embedded control applications. The device is supplied from a 3.3 V rail and is specified for the commercial temperature grade. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes instructions held in external memory. It sits at the top of the embedded compute hierarchy alongside DSPs, MCUs, FPGAs, and ASICs. Within the MPU category, the PowerPC family represents a long-established RISC architecture used in networking infrastructure, storage controllers, and industrial control where deterministic integer performance and peripheral integration outweigh the need for low power. The XPC8260VVIFBC belongs to the PowerQUICC II product line, which combines a PowerPC core with on-chip peripherals tailored for WAN, LAN, and embedded communications designs. Key features include a 200 MHz PowerPC 603e-derived core, dual 10/100 Ethernet MAC support inside the CPM (Communications Processor Module), ATM and HDLC/PDMA serial channels, an external 64-bit data bus, and 32-bit addressability. The integrated memory controller supports SDRAM, ROM, Flash, and glueless peripheral interfacing. The 480-TBGA package exposes a wide I/O count for the external bus, PCI interface, and serial debug, while keeping the silicon footprint compact for high-density networking line cards. The 0.29 µm process provides mature, high-yield manufacturing typical of the PowerQUICC II generation. Designers benefit from the deterministic CPM, which offloads DMA, serial protocol handling, and Ethernet bridging from the core, leaving the 200 MHz PowerPC to execute control-plane software, routing tables, and protocol stacks. Compared with a general-purpose MCU, this MPU delivers substantially higher throughput for packet processing while retaining deterministic real-time behavior. Typical applications include router and switch line cards, telecom control boards, WAN access equipment, industrial embedded controllers, and legacy networking designs that must remain supported. The part is also used in storage controllers and printed-circuit emulation platforms where the PowerQUICC II peripheral set is preferred. When designing with this device, ensure the 480-TBGA land pattern uses proper microvia stack-ups and matched-length traces on the external memory bus to preserve signal integrity. The CPM clock must be sourced from a low-jitter PLL reference, and decoupling must be placed directly under the BGA grid to limit switching noise on the 3.3 V rail. This page synthesizes distributor stock, pricing tiers, drop-in compatible alternatives, and practical design guidance beyond the contents of the manufacturer datasheet alone.

USD $140.00 在庫あり

XPC8260ZUIFBC

XPC8260ZUIFBC - PowerQUICC II MPC8260 MPU, 200MHz, 480-TBGA | NXP

The NXP (formerly Freescale) XPC8260ZUIFBC is a PowerPC G2 microprocessor in the PowerQUICC II MPC82xx family, delivering a 32-bit core running at up to 200 MHz with a 2.5 V core supply and 3.3 V I/O supply, housed in a 480-ball TBGA package measuring 37.5 x 37.5 mm. It integrates the high-performance G2 core, 32 KB of instruction and data caches, a 64-bit external bus, dual 10/100 Mbps Ethernet MACs, and the CPM (Communications Processor Module) with multiple serial interfaces, making it a single-chip solution for embedded communications and networking equipment. It is built on a 0.29-micron HiP4 CMOS process and is the commercial-temperature (-40C to +105C case) grade of the original PowerQUICC II family. What is a PowerQUICC II microprocessor? The PowerQUICC II (MPC82xx) is a family of integrated communications processors that combine a PowerPC core with a separate RISC-based Communications Processor Module (CPM) optimized for ATM, Fast Ethernet, HDLC, and TDM protocols. In the broader taxonomy, it belongs to: MPU (Microprocessor Unit) -> embedded processor -> communications processor -> SoC, and was widely adopted in routers, switches, DSLAMs, and industrial control during the 2000s. Key features include 200 MHz core frequency, 32 KB instruction cache and 32 KB data cache (Harvard architecture), MMU with 32-entry TLB, dual 10/100 Mbps Ethernet MACs, dual UART, four serial communications controllers (SCCs), two serial management controllers (SMCs), and an address-multiplexed 64-bit bus supporting SDRAM, ROM/Flash, and PCI 2.2. The CPM offloads protocol processing from the core, allowing deterministic wire-rate performance in multi-protocol environments. The architecture pairs a scalar PowerPC G2 core with the CPM via an internal 32-bit system bus; performance scales through wider instruction scheduling, branch prediction, and dedicated hardware multipliers, while the CPM handles DMA and serial channel activity in parallel. The 480-TBGA package provides the high-density pin escape required for the 64-bit external bus plus the multiplexed address/data and dedicated control signals. Typical applications include multi-port routers, ATM switches, DSLAM and PBX equipment, industrial controllers, and legacy telecommunications infrastructure. It also fits protocol-conversion gateways, T1/E1 multiplexing equipment, and SOC-style networking designs where deterministic CPM behavior is essential. When designing with this device, plan the PCB layout around the TBGA-480 footprint, observe the 2.5 V/3.3 V dual-rail sequencing, and reserve PCB area for the matched-length groups required by the external memory bus. Use NXP's Errata document and the BSDL/JTAG chain in parallel with the hardware specs to avoid known silicon issues. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design considerations that go beyond the simple hardware-specs datasheet, helping engineers evaluate replacements for an aging communications-processor design.

USD $99.50 在庫あり

XPC850DSLCZT50BU

XPC850DSLCZT50BU - MPC8xx PowerQUICC MPU 50MHz | NXP | 256-PBGA

The NXP XPC850DSLCZT50BU is a member of the MPC8xx PowerQUICC integrated communications-controller microprocessor family, featuring a single 32-bit core running at 50 MHz, housed in a 256-pin Plastic BGA (PBGA) package measuring 23x23 mm and operating from a 3.3 V supply rail. What is a PowerQUICC microprocessor? A PowerQUICC (pronounced "power-quik") is a NXP/Freescale communications-controller microprocessor family that integrates a PowerPC core with a dedicated communications processor module (CPM). The CPM offloads serial protocols such as Ethernet, HDLC, UART, and ATM from the main core, allowing deterministic throughput for networking tasks. Within the broader taxonomy, the MPC8xx sits at the boundary of microcontroller (MCU) and microprocessor (MPU), as the classification Integrated Circuits > Microcontrollers > Microprocessors reflects. Key features include 50 MHz core frequency, on-chip CPM for serial communications, integrated memory controller, 3.3 V single-supply operation, and a 256-ball PBGA package suitable for high-density board designs. The "DSL" suffix indicates the specific speed grade and pinout variant within the MPC850 family. Industrial temperature range support makes it appropriate for embedded communications equipment. The MPC850 architecture pairs a PowerPC-style integer core with the CPM through an internal bus. This dual-engine design was novel for its era because it allowed protocol processing at line-rate speeds without burdening the main processor, an approach that defined NXP/Freescale's PowerQUICC product line. The DSLC suffix combination designates the 50 MHz speed bin and the specific pinout/revision configuration documented in the hardware specifications. Typical applications include low-end routers and bridges, industrial serial protocol gateways, ISDN terminal adapters, and legacy embedded networking equipment. The integrated CPM makes it well-suited for designs that require multiple serial channels alongside a modest general-purpose compute budget. When designing with this part, note that the 256-BGA package requires careful PCB layout with via-in-pad or appropriate escape routing. The 3.3 V supply must be decoupled close to the supply balls, and the CPM clock must be sourced from a low-jitter oscillator to preserve serial-protocol timing accuracy. This page synthesizes distributor pricing, drop-in alternatives drawn from the MPC850 family cross-reference, and practical design considerations drawn from NXP's hardware specifications. The information above is curated for engineers maintaining or replicating legacy embedded communications hardware.

USD $13.85 在庫あり

XPC850SRZT80BU

XPC850SRZT80BU - 32-Bit 80MHz MPC8xx MPU | NXP | 256-PBGA

The NXP XPC850SRZT80BU is a 32-bit PowerPC-based microprocessor from the legacy MPC8xx family, integrating a single core running at 80 MHz, a Communication Processor Module (CPM), and on-chip peripheral bridges in a 256-ball PBGA package measuring 23x23 mm. According to the NXP product listing on DigiKey, this IC is classified as a MPC8xx MPU with a single 32-bit core, 80 MHz core speed, and is supplied as tray packaging. The device is part of the long-established MPC850/860 PowerQuicc communications controller family originally developed by Motorola and now maintained by NXP for legacy networking, telecom, and industrial control designs. What is an MPU in the MPC8xx family? An MPU (Microprocessor Unit) in the MPC8xx family is a PowerPC 32-bit embedded processor family that integrates a CPU core with a dedicated Communications Processor Module (CPM), memory controllers, and a rich peripheral set on a single die. Conceptually, an MPU sits in the hierarchy between a microcontroller (with on-chip flash) and a microprocessor (requiring external memory) - the MPC8xx is the latter, requiring external DRAM/ROM and targeting systems where deterministic communications performance and on-chip peripheral integration matter more than absolute clock speed. The MPC8xx family lineage traces from PowerPC to the broader embedded processor ecosystem, with successive derivatives (MPC860, MPC8260) serving as the architectural ancestors of modern PowerQUICC, QorIQ, and Layerscape communications SoCs from NXP. Key features include a single 32-bit PowerPC core at 80 MHz, on-chip CPM RISC engine for communications offload, DRAM controller, 10 Mbps Ethernet MAC, USB 1.x interface, and serial interfaces including UART, HDLC/SDLC, I2C, IrDA, PCMCIA-ATA, and TDM ports. The device operates from a 3.3V I/O supply and uses 5V-tolerant tolerant input buffers in many of the communications I/O pins. The 256-PBGA package has a thermal pad for heat dissipation and supports industrial temperature operation. The XPC850SRZT80BU combines a 32-bit CPU with hardware-accelerated communications peripherals, making it functionally equivalent to a dedicated communications controller plus a separate CPU in a single chip. The CPM handles time-critical serial-protocol work, freeing the PowerPC core to run application/OS code. Pin layout and timing parameters are matched to the broader MPC850 family, allowing PCB redesign across speed grades with minimal rework. Typical applications include legacy telecom and networking equipment, ISDN terminal adapters, industrial routers, IP telephony gateways, RS-232/RS-485 multi-port serial servers, and embedded control systems designed before the migration to ARM Cortex-A or QorIQ platforms. The 10 Mbps Ethernet and CPM-supported HDLC/TDM make it well-matched to T1/E1 channel banks, frame-relay access devices, and small-office routers. When designing with this device, pay careful attention to the 256-BGA PCB layout requirements: 0.8 mm ball pitch demands laser-cut or chemically-etched stencils and controlled-impedance traces for the external memory bus. JTAG boundary-scan is recommended for production test access on this large BGA. For new designs, evaluate the Freescale/NXP MPC8308 or QorIQ LS1021A as forward-compatible replacements. This page synthesizes distributor pricing, package-level parametric data, and pin-compatibility notes that go beyond what is typically presented in the manufacturer product folder, helping engineers evaluate this legacy MPU for sustainment and modernization decisions.

USD $29.95 在庫あり

Z84C00

Z84C00 - CMOS Z80 8-Bit CPU Microprocessor | Zilog

The Zilog Z84C00 is a CMOS Z80 8-bit central processing unit (CPU) microprocessor available in speed grades of 6 MHz, 8 MHz, 10 MHz, and 20 MHz, executing 158 instructions with software compatibility to the Intel 8080A, housed in 40-pin DIP, 44-pin PLCC, or 44-pin QFP packages. A microprocessor (CPU) is the core computation and control block of a computer or embedded system, executing stored instructions and coordinating memory and peripheral I/O. The Z80 family sits within the 8-bit microprocessor hierarchy, which in turn belongs to the broader semiconductor category of embedded processors. First released by Zilog in 1976, the Z80 became one of the most widely deployed CPUs of the early personal computing era. Key features of the Z84C00 include its extensive 158-instruction set (including 8080A-compatible instructions plus indexed, block, and bit instructions), dual register file with alternate registers for fast context switching, on-chip dynamic RAM refresh counter, and a single 5V supply. The CMOS process delivers significantly lower power consumption than the original NMOS Z8400, making it suitable for battery-powered and industrial systems. Technically, the Z84C00 is a fourth-generation enhanced microprocessor offering higher system throughput and more efficient memory utilization than second- and third-generation processors, according to the Zilog Z8400/Z84C00 datasheet. It provides 16-bit address bus capability for up to 64 KB of memory addressing, interrupt modes 0, 1, and 2, a non-maskable interrupt (NMI) input, and WAIT states for slow memory. Typical applications include retro-computing repairs and reproductions (ZX Spectrum, MSX, RC2014 kits), industrial control and instrumentation, embedded controllers, and educational platforms. Its decades-long software ecosystem makes it a natural fit for legacy system maintenance. Design consideration: verify the speed-grade suffix (06, 08, 10, 20) against your clock source, and note the Z84C00 family was officially discontinued by Zilog with last orders in June 2024, so plan lifecycle sourcing accordingly. This page synthesizes distributor availability data, drop-in same-family alternatives, and lifecycle guidance not found in the manufacturer datasheet.

USD $2.55 在庫あり

Z84C0010FEC

Z84C0010FEC - 10MHz CMOS Z80 CPU, 44-LQFP | Zilog

The Zilog Z84C0010FEC is a CMOS Z80 8-bit microprocessor (CPU) core operating at clock speeds up to 10 MHz, housed in a 44-pin LQFP (10 x 10 mm) surface-mount package. As a member of the Z84C00 family, it delivers the classic Z80 architecture in a low-power CMOS process. A microprocessor is the central processing unit (CPU) of a computing system, responsible for executing program instructions, performing arithmetic and logic operations, and controlling memory and peripheral access. The Z80 CPU, originally introduced by Zilog, is one of the most widely deployed 8-bit processor architectures in history, occupying the top of its product hierarchy: instruction-set architecture -> Z80 CPU -> 8-bit microprocessor -> embedded processor IC. Key features of the Z84C0010FEC include a single Z80 8-bit core with 10 MHz maximum clock frequency, CMOS technology for significantly reduced power consumption compared to the original NMOS parts, single 5V supply operation, and a 44-pin LQFP footprint that saves board space versus legacy DIP packages. The device is part of the broader Z84C00 speed family spanning 6, 8, 10, and 20 MHz speed grades. Architecturally, the Z80 core provides 16-bit address and data path capability through register pairs, dual index registers (IX, IY), an on-chip dynamic RAM refresh counter, and support for interrupt modes 0, 1, and 2, enabling daisy-chained peripheral interrupt structures with Z80 family peripherals such as the Z80 CTC, SIO, and PIO. Typical applications include legacy industrial control systems, embedded retro-computing and hobbyist designs, telecom line cards, and maintenance replacement of CPU silicon in long-life equipment where software compatibility with the Z80 instruction set must be preserved. Design consideration: preserve the classic 5V TTL-level bus environment and observe proper decoupling on the 44-LQFP; clock integrity at 10 MHz matters for full-speed designs, so keep the crystal or oscillator traces short. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

USD $3.95 在庫あり

Z84C0020PEC

Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40

Zilog Z84C0020PEC is an 8-bit CMOS Z80 central processing unit operating at 20 MHz in a 40-pin PDIP package. The verified distributor data identifies one core, a 20 MHz clock, and 40-pin PDIP construction. The family datasheet identifies the device as part of the enhanced Z8400/Z84C00 processor family, whose internal register set contains 208 bits and whose architecture supports efficient memory utilization and software migration. A microprocessor is the central control element of a computer or embedded controller, fetching instructions, decoding operations, and coordinating memory and peripheral access. The Z80 belongs to the 8-bit microprocessor class and extends the earlier Z80 architecture through enhanced processing capability. Within the broader electronics hierarchy, it is a CMOS microprocessor IC rather than a microcontroller: external memory, clocking, reset, interrupt, and peripheral circuitry remain part of the surrounding system design. The most important verified specifications are the 8-bit CPU architecture, 20 MHz operating frequency, single-core configuration, CMOS technology, and PDIP-40 package. Zilog describes speed offerings across the broader family from 6 MHz through 20 MHz. The manufacturer documentation states that the processor family provides improved system throughput and more efficient memory utilization than comparable earlier-generation processors while retaining software-migration support. Z84C0020PEC is suitable for legacy Z80 systems, industrial controllers, educational platforms, embedded instruments, and retro-computing designs that specifically require this processor and package. Its parallel CPU architecture remains useful for systems built around Z80 memory, interrupt, and peripheral conventions. Because it is a microprocessor rather than a self-contained microcontroller, designers must provide the required external system components and verify timing, bus loading, and software compatibility. A critical hardware requirement is confirmation of the complete operating voltage, temperature grade, pinout, timing, and electrical limits from the manufacturer datasheet for the exact ordering code. The suffix PEC is associated with the listed 40-pin PDIP device, but package and suffix details should not be inferred beyond the supplied data when purchasing or redesigning. This page consolidates verified distributor identification, manufacturer family documentation, sourcing links, and practical replacement guidance. It also distinguishes true same-footprint drop-in candidates from alternatives that are merely functionally similar but would require board changes, preventing an incompatible substitution from being presented as a safe replacement.

見積もり在庫あり

DSPIC33CK256MP608-E/PT

dsPIC33CK256MP608-E/PT - 100MIPS DSC, 256KB Flash, CAN FD | Microchip

The Microchip Technology dsPIC33CK256MP608-E/PT is a 16-bit digital signal controller (DSC) with a single dsPIC33CK core running at 100 MHz (100 MIPS), 256 KB of dual-panel Flash memory, and 64 KB of RAM, housed in an 80-pin TQFP (12 x 12 mm) package with extended temperature range (-40C to +125C). A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the preferred device class for closed-loop control systems that need fast math (MAC, divide, barrel shifter) plus rich analog and timing peripherals on one chip. Key features of this part include CAN FD for automotive and industrial networking, integrated operational amplifiers that reduce external BOM cost for current-sense front-ends, and 12-bit ADCs for precision feedback. The dual-panel Flash architecture supports live firmware updates, and the family carries Functional Safety (FuSa) support documentation. Per Microchip's product page, the dsPIC33CK family targets high-performance, precision motor-control systems. Technically, the single-core dsPIC33C engine executes most instructions in one cycle at 100 MIPS, while high-resolution PWM peripherals generate industry-leading edge resolutions for power conversion and motor drive. The -E suffix denotes extended operation to +125C and the part is AEC-Q100 qualified, per distributor listings. Typical applications include PMSM and BLDC motor control, digital power supplies (totem-pole PFC, LLC), automotive auxiliaries, and industrial inverters where CAN FD connectivity and deterministic PWM are mandatory. Design consideration: budget the 64 KB RAM carefully - the DMA and ADC subsystems can consume significant share space in high-sampling-rate control loops. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.25 在庫あり

DSPIC33EP16GS504T-E/ML

dsPIC33EP16GS504T-E/ML - 16-Bit 60 MIPS DSC 16KB Flash QFN-44 | Microchip

The Microchip dsPIC33EP16GS504T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP16GS504 family, delivering up to 60 MIPS performance with 16KB (16K x 8) of FLASH program memory, housed in a 44-pin QFN (8x8 mm, ML) surface-mount package. The device is qualified for automotive use (AEC-Q100) and supports Functional Safety (FuSa) development. A digital signal controller combines the compute capability of a 16-bit digital signal processor with the peripheral integration and control peripherals of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. In the digital power ecosystem, a DSC executes the control loops of switch-mode power supplies, replacing analog control ICs with programmable firmware while retaining hard real-time response. Key features of the dsPIC33EP GS family include dedicated high-speed PWM modules purpose-built for switch-mode power supply (SMPS) topologies, on-chip high-speed ADCs for current and voltage feedback sampling, DSP-engine multiply-accumulate instructions for digital control loop math, and internal fast RC oscillators. The GS50x sub-family is explicitly marketed by Microchip for digital power conversion such as AC-DC and DC-DC power supplies. The 60 MIPS core executes the control loop at switching frequencies typical of modern SMPS designs, while the dedicated PWM peripherals offer complementary, edge-aligned and center-aligned modes with dead-time insertion - critical for half-bridge, full-bridge and LLC converters. The 16KB FLASH supports compact, deterministic control firmware; the -40C to +125C extended temperature grade (E suffix) suits automotive and industrial environments. Typical applications include interleaved power factor correction (PFC), AC-DC power supplies, DC-DC converters, digital lighting ballasts, battery chargers and solar micro-inverters. Microchip publishes an interleaved PFC reference design for this family operating from universal input voltage up to 350W output. Design consideration: budget FLASH carefully - at 16KB, avoid linking large middleware stacks and prefer hand-optimized assembly or compiler-optimized control-loop routines; verify per-pin mapping against the 44-QFN datasheet pin diagrams before layout. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $2.55 在庫あり

dsPIC33EP512GM306-I/PT

dsPIC33EP512GM306-I/PT - 70 MIPS DSC, 512KB Flash, 64-TQFP | Microchip

The Microchip dsPIC33EP512GM306-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33E family, delivering up to 70 MIPS through a 140 MHz dsPIC DSC core with integrated single-cycle MAC DSP engine, packaged in a 64-pin TQFP (10x10 mm) and supplied in 3.0 V to 3.6 V industrial-grade temperature range (-40C to +85C). It integrates 512 KB of Flash program memory, 48 KB of SRAM, and on-chip peripherals tuned for high-performance precision motor control, digital power conversion, and advanced sensor processing. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a deterministic MCU control pipeline with a hardware DSP multiply-accumulate (MAC) engine. In the taxonomy, a DSC sits between a microcontroller (MCU) and a digital signal processor (DSP); it executes control code C-friendly while accelerating math-heavy signal processing kernels such as Field Oriented Control (FOC), digital PID, and FFT. The dsPIC33EP 'GM' sub-family is specifically designed for motor control and digital power, integrating up to four op-amps, multiple PWMs with dead-time control, and high-speed 10/12-bit ADCs. Key features of the dsPIC33EP512GM306-I/PT include twelve PWM channels with flexible triggering, eight 16-bit timers, four on-chip op-amps for current sensing in motor feedback loops, two 12-bit ADCs with up to 16 simultaneous sample-and-hold channels reaching 3.25 MSPS, and dual comparators. The device also integrates a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing, a 16-bit Peripheral Pin Select (PPS) I/O remapping engine, and multiple UART/SPI/I2C/CAN interfaces. Its 16-channel DMA controller offloads data movement for deterministic, low-latency control loops. Architecture is built on a 16-bit modified Harvard bus with separate program and data paths and a hardware DSP engine. With a 140 MHz CPU clock (70 MIPS), the MAC unit executes single-cycle 16x16-bit multiplies with 40-bit accumulator, ideal for high-bandwidth control loops in PMSM/BLDC drives and power conversion. The integrated op-amps and comparators form the feedback analog front-end, eliminating an external current-sense amplifier chain and improving noise immunity. Typical applications include field-oriented control of PMSM and BLDC motors (drone ESCs, EV traction, HVAC compressors), digital power stage control for AC/DC and DC/DC converters, solar micro-inverters, servo drives, industrial automation controllers, sensorless motor control using BEMF or shunt-based observers, and high-speed signal acquisition front-ends. Audio and ultrasonic sensing are also enabled by the dual-ADC simultaneous sampling and the DSP MAC. When designing with this device, allocate the 64-pin budget between motor power signals (PWM H/L pairs, gate-driver EN lines), analog feedback (current shunts, BEMF dividers routed through the on-chip op-amps), and communication (CAN, UART, I2C for sensors and host MCU). Decouple VDD/VSS pairs as documented in the family datasheet; route AVDD separately from DVDD to keep ADC noise below 1 LSB. A JTAG/ICSP header is recommended for in-circuit debugging using MPLAB X IDE. This page synthesizes distributor pricing, drop-in design options, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the dsPIC33EP512GM306-I/PT for next-generation motor-control and digital-power designs.

USD $7.18 在庫あり

DSPIC33EP512GP504-E/TL

dsPIC33EP512GP504-E/TL - 512KB 16-bit DSC 60MHz | Microchip

The Microchip Technology dsPIC33EP512GP504-E/TL is a 16-bit digital signal controller (DSC) with 512KB flash, 48KB RAM, a 60 MHz core, and a 44-pin VFTLA (TQFP-44) package with exposed pad, rated for -40C to +125C operation under AEC-Q100. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). DSCs occupy the mid-tier of the embedded processing hierarchy - above general-purpose microcontrollers in math throughput, below application processors - making them the standard choice for closed-loop motor control, digital power conversion, and sensor signal processing where deterministic interrupt latency and hardware multiply-accumulate (MAC) units matter. Key features of this part include the dsPIC33E 16-bit core running at up to 70 MIPS class performance with DSP instruction support, 512KB of self-programmable flash and 48KB of on-chip RAM, and an integrated analog suite: multiple on-chip operational amplifiers, comparators, a CTMU (Charge Time Measurement Unit), and a high-performance 10/12-bit ADC. Communication coverage is broad, with CAN 2.0B, multiple UARTs, SPI, and I2C interfaces, plus the Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. The high-speed PWM module with advanced analog integration positions the device squarely in digital power and motor-control designs, while the op amps reduce external component count in current-sense signal chains. Code density from the enhanced 16-bit architecture allows complex control loops to be written largely in C with assembly-level inner loops where needed. Typical applications include brushless DC (BLDC) and PMSM motor drives, digital SMPS and power-factor-correction converters, automotive body and powertrain auxiliary systems (leveraging the AEC-Q100 -E extended temperature grade), and industrial control nodes that need CAN connectivity plus on-chip analog. Design consideration: supply the core from the internal regulator using the required low-ESR VCAP capacitor per the Microchip datasheet, and budget the 3.3V I/O rail separately; the exposed pad on the VFTLA package should be soldered to a grounded copper pour for best thermal and EMC margins. This page synthesizes distributor inventory data, same-family drop-in alternatives, and practical design guidance beyond what the manufacturer product page provides.

USD $5.20 在庫あり

DSPIC33EP64GS505-E/PT

dsPIC33EP64GS505-E/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EP64GS505-E/PT is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 64KB of Flash program memory, housed in a 48-pin TQFP (PT) package with exposed pad and extended temperature range of -40C to +125C. A digital signal controller combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy, DSCs sit at the heart of digital switch-mode power supplies (SMPS), replacing analog control loops with firmware-based control for higher flexibility, programmability, and telemetry. The dsPIC33EP family occupies the 16-bit embedded control segment between general-purpose MCUs and 32-bit application processors. Key features of the GS50x family include an interconnected high-speed PWM module purpose-built for power conversion, high-speed analog-to-digital converters, on-chip digital-to-analog converters (DAC), programmable gain amplifiers (PGA), and analog comparators that close control loops without external components. According to Microchip, the dsPIC33EPXXGS50X family is explicitly targeted at digital power applications. Architecturally, the device uses the enhanced dsPIC33E core with DSP instruction support, allowing single-cycle MAC operations used in proportional-integral-derivative (PID) and compensator routines. The interconnected PWM, ADC, and comparator fabric enables loop latencies measured in nanoseconds, critical for peak-current-mode and multi-loop converters. Typical applications include AC-DC converters, power factor correction (PFC) stages, DC-DC converters, uninterruptible power supplies, solar micro-inverters, and lighting ballasts. The extended -40C to +125C operating range of the E-grade part suits industrial and automotive-adjacent environments. Design consideration: budget ADC sampling and PWM update timing so the control loop executes within one switching period; use the family reference design (Interleaved PFC, 350W) as a validated starting point. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.45 在庫あり

DSPIC33EP64GS505T-E/PT

dsPIC33EP64GS505T-E/PT - 16-bit 70 MIPS DSC 64KB Flash | Microchip

The Microchip Technology dsPIC33EP64GS505T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP GS series for SMPS and digital power conversion, delivering up to 70 MIPS performance with 64KB (64K x 8) of Flash program memory, packaged in a 48-pin TQFP with exposed pad (7x7 mm), and qualified to AEC-Q100 for automotive use with an extended -40C to +125C operating range. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management semiconductor hierarchy, a DSC sits between a general-purpose MCU and a dedicated power-conversion ASIC, providing real-time loop closure for switch-mode power supplies. The dsPIC33EPXXGS50X family is specifically architected for multi-loop digital SMPS topologies. Key differentiating features include high-speed PWM modules purpose-built for power conversion, high-speed analog-to-digital converters with an integrated programmable gain amplifier (PGA), on-chip comparators, and an interconnect fabric that ties the PWM, ADC and comparator blocks together for deterministic control-loop latency. The GS50x family also carries Functional Safety (FuSa) support documentation, enabling use in safety-conscious designs. Architecturally, the device is built on the 16-bit dsPIC33EP core with DSP instruction extensions (MAC, DSP multiply), executing from zero-wait-state Flash at full speed. The interconnected high-speed PWM supports complementary outputs, dead-time control and fault protection essential for AC-to-DC, DC-to-DC, power factor correction (PFC) and inverter stages. Typical applications include AC-DC power supplies, digital PFC stages, DC-DC converters, solar micro-inverters, LED drivers and battery chargers, where the combination of fast ADC sampling and high-resolution PWM directly improves loop bandwidth and efficiency. Design consideration: the exposed-pad TQFP requires a solid ground connection to the PCB thermal pad for both heat dissipation and analog ground integrity - do not leave the ePad floating. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-25.

USD $3.38 在庫あり

DSPIC33FJ32GS606-E/MR

dsPIC33FJ32GS606-E/MR - 16-bit DSC 40MIPS 32KB Flash | Microchip

The Microchip Technology dsPIC33FJ32GS606-E/MR is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 32KB of Flash program memory, and 4KB of RAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad and an extended industrial temperature rating of -40C to +125C. A digital signal controller combines the deterministic control of a microcontroller (MCU) with the mathematical throughput of a digital signal processor (DSP) in a single core. In the power-management hierarchy, the dsPIC33FJ GS series sits at the application level of switch-mode power supply (SMPS) control: it closes current- and voltage-control loops that would otherwise require multiple analog ICs, making it a programmable power-conversion controller rather than a fixed-function chip. Key features include a high-speed PWM module purpose-built for power conversion, high-speed ADC and analog comparators for cycle-by-cycle current limiting, four DMA channels, eight timers, boundary-scan (JTAG) capability, a barrel shifter for fast DSP math, and dual serial I/O ports on a multiple internal bus architecture. These peripherals directly support multi-loop digital power topologies. Technically, the dsPIC RISC core executes most instructions in a single cycle at up to 40 MIPS from a 3.0V to 3.6V (3.3V nominal) supply. The dedicated PWM hardware supports complementary outputs, dead-time insertion, and fault protection, while the fast ADC can synchronize sampling to the PWM period, which is essential for stable average-current-mode control. An internal regulator requires a low-ESR capacitor of at least 22 uF, 16V on the VCAP pin, which must not be tied to VDD. Typical applications are AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages including interleaved PFC reference designs up to 350W, uninterruptible power supplies (UPS), and solar inverters. For design, budget the VCAP capacitance and PCB copper area early: at 40 MIPS the core draws its full current continuously in power-conversion duty, and incorrect VCAP decoupling is a leading cause of brown-out resets in this family. This page adds value beyond the datasheet by consolidating distributor stock and pricing, same-package drop-in alternatives, and practical design notes for digital power designs in one place.

USD $4.42 在庫あり

eZ80F91AZ050SG

eZ80F91AZ050SG - 50MHz 8-bit 256KB Flash MCU | Zilog

The Zilog eZ80F91AZ050SG is an 8-bit microcontroller in the eZ80 Acclaim! family, delivering 50 MHz CPU performance with 256 KB of on-chip Flash and 16 KB SRAM in a 144-pin LQFP (20x20 mm) package. According to DigiKey listing 928880, the part integrates an EMAC (Ethernet Media Access Controller) for embedded networking and supports both Z80-compatible (64 KB) and full 24-bit (16 MB) addressing modes. An 8-bit microcontroller (MCU) is a single-chip processor whose internal data path is 8 bits wide, optimized for control-oriented tasks that demand deterministic behaviour, low cost, and minimal power. The eZ80 architecture extends the classic Z80 instruction set with a 24-bit linear address space, making it a bridge between legacy 8-bit code and 32-bit addressing. Within the IC taxonomy it sits at: microcontroller -> embedded processor -> integrated circuit. It belongs to the broader class of flash microcontrollers and is commonly deployed in industrial control and embedded communication designs. Key features include 32 general-purpose I/O pins, four 16-bit timers, a 10/100 Ethernet MAC with MII interface, two UARTs, I2C, SPI, IrDA encoder/decoder, and a JTAG debug port. The on-chip peripherals are designed for embedded internet connectivity, while the SRAM-backed Flash supports in-application programming for field upgrades. The eZ80F91AZ050SG uses a single-cycle pipelined core running at 50 MHz, providing sustained throughput equivalent to 80 MIPS peak (Z80 instructions). The integrated EMAC implements full IEEE 802.3 MAC and PHY interfacing, eliminating the need for an external Ethernet controller in point-of-sale and embedded gateway designs. Typical applications include industrial control, point-of-sale (POS) terminals, embedded communication gateways, security systems, and building automation. The wide address space makes the device attractive for legacy Z80 software migration and new 24-bit flat-memory designs. Design considerations include ensuring proper decoupling on the analog supply pins, following the recommended 50 MHz crystal layout, and reviewing Zilog application note PS0192 for EMAC magnetics and PHY interface. The device operates from a 3.3 V supply. This page consolidates verified distributor pricing, drop-in Zilog alternatives, and application guidance not collated in the standalone datasheet, providing an integrated reference for embedded engineers.

USD $10.85 在庫あり

i7-1370PRE

i7-1370PRE - 14C/20T Embedded Raptor Lake, 24MB Cache | Intel

The Intel Core i7-1370PRE is a 13th Generation Raptor Lake mobile/embedded processor featuring 14 cores (6 Performance + 8 Efficient), 20 threads, 24 MB Intel Smart Cache, and a maximum turbo frequency of 4.80 GHz, designed in the FC-BGA16F package. Built on Intel 7 process technology, it supports up to 96 GB DDR5/DDR4 memory and integrates Intel Iris Xe graphics (96 EU). The processor operates with a 28 W processor base power and targets embedded and industrial applications requiring long-life availability. An embedded processor is a CPU designed for use in industrial, in-vehicle, or IoT systems where long-term availability (typically 10+ years), extended temperature tolerance, and platform stability are critical. Embedded CPUs sit within the broader taxonomy: processor -> central processing unit (CPU) -> mobile/embedded CPU -> Raptor Lake family -> Intel Core i-series. The 'PRE' suffix in Intel's mobile roadmap specifically denotes an embedded SKU qualified for long-life cycles, distinct from mainstream consumer 'P' parts. Key specifications include 6 P-cores with hyper-threading up to 5.0 GHz peak and 8 E-cores up to 3.7 GHz, 24 MB L3 cache, 96 EU Iris Xe graphics at 1.50 GHz, and 28 W processor base power configurable down to 20 W. The FC-BGA16F socket (1744-ball FCBGA) provides platform integration. Memory support includes DDR5-5200, DDR4-3200, LPDDR5-6400, and LPDDR4x-4267 with ECC capability. Architecturally, the i7-1370PRE uses Intel's hybrid P-core/E-core design, where Performance cores handle single-threaded latency-critical work and Efficient cores process throughput-oriented background tasks via Intel Thread Director scheduling. The 10 nm Intel 7 process allows higher core counts within embedded thermal envelopes, and the integrated Iris Xe GPU enables display and light GPGPU workloads without a discrete GPU. Typical applications include industrial edge computing, in-vehicle infotainment, factory automation HMIs, medical imaging systems, and digital signage. The 'E' (embedded) qualification extends operating temperature support and supply longevity compared to standard 'P' siblings. When designing with this CPU, select motherboards and chipsets engineered for the FC-BGA16F socket rather than consumer LGA sockets, validate thermal design at the configured cTDP, and confirm chipset firmware supports the specific embedded SKU. ECC memory and Intel vPro features require compatible PCH selection. This page synthesizes distributor pricing, Intel ARK specifications, cross-reference alternatives, and PCB/socket design notes to support embedded system engineers selecting between long-life Intel SKUs and cross-generational replacements.

USD $365.00 在庫あり

製品 (18161)