Z84C0020PEC - 20 MHz Z80 CMOS CPU | Zilog | DIP-40
部品番号: Z84C0020PEC ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
Z84C0020PEC 概要
A microprocessor is the central control element of a computer or embedded controller, fetching instructions, decoding operations, and coordinating memory and peripheral access. The Z80 belongs to the 8-bit microprocessor class and extends the earlier Z80 architecture through enhanced processing capability. Within the broader electronics hierarchy, it is a CMOS microprocessor IC rather than a microcontroller: external memory, clocking, reset, interrupt, and peripheral circuitry remain part of the surrounding system design.
The most important verified specifications are the 8-bit CPU architecture, 20 MHz operating frequency, single-core configuration, CMOS technology, and PDIP-40 package. Zilog describes speed offerings across the broader family from 6 MHz through 20 MHz. The manufacturer documentation states that the processor family provides improved system throughput and more efficient memory utilization than comparable earlier-generation processors while retaining software-migration support.
Z84C0020PEC is suitable for legacy Z80 systems, industrial controllers, educational platforms, embedded instruments, and retro-computing designs that specifically require this processor and package. Its parallel CPU architecture remains useful for systems built around Z80 memory, interrupt, and peripheral conventions. Because it is a microprocessor rather than a self-contained microcontroller, designers must provide the required external system components and verify timing, bus loading, and software compatibility.
A critical hardware requirement is confirmation of the complete operating voltage, temperature grade, pinout, timing, and electrical limits from the manufacturer datasheet for the exact ordering code. The suffix PEC is associated with the listed 40-pin PDIP device, but package and suffix details should not be inferred beyond the supplied data when purchasing or redesigning.
This page consolidates verified distributor identification, manufacturer family documentation, sourcing links, and practical replacement guidance. It also distinguishes true same-footprint drop-in candidates from alternatives that are merely functionally similar but would require board changes, preventing an incompatible substitution from being presented as a safe replacement.
ドロップイン代替品: Z84C0020PEC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
Z84C0020PEG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z84C0020FEG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z84C0020FEC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z84C0020AEG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z84C0020PEC 最大定格＆電気的特性
| Processor Type | Z80 central processing unit |
| CPU Architecture | 8-bit |
| Core Count | 1 core |
| Maximum Stated Clock Frequency | 20 MHz |
| Process Technology | CMOS |
| パッケージ | 40-pin PDIP |
| Package Family | PDIP through-hole package |
| Internal Register Capacity | 208 bits |
| Family Speed Range | 6 MHz to 20 MHz |
| 実装タイプ | Through-hole |
Z84C0020PEC pdip through-hole package ピン配置ガイド
Z84C0020PEC (pdip through-hole package パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z84C0020PEC.
詳細は データシート をご参照ください。
主な用途
Z84C0020PEC の用途: 6 件s: Legacy Z80 Embedded Controller, Industrial Control and Instrumentation, Educational Z80 Processor Platform, Retro-Computing and Hardware Preservation, Embedded Sequencing Controller, Communication and Bus Interface Controller.
Legacy Z80 Embedded Controller
The Z84C0020PEC fits legacy Z80 embedded controllers that are built around the established 8-bit processor architecture and a 20 MHz CPU. Its 40-pin PDIP package is useful where through-hole assembly and socketed maintenance are preferred over a compact surface-mount design. Because the verified part is a microprocessor rather than a microcontroller, the board must provide the required external memory and support circuitry. The main design benefit is compatibility with established Z80 software and bus architecture; the trade-off is legacy-package size and dependence on external system components.
おすすめ
Industrial Control and Instrumentation
The Z84C0020PEC can be considered for industrial control and instrumentation platforms that specifically require a 20 MHz Z80-compatible processor and a 40-pin PDIP footprint. Its single 8-bit core is suited to legacy control logic, sequencing, and supervisory functions when the existing software depends on Z80 behavior. Verify the exact temperature grade and supply limits before using it in a harsh environment, because those details were not included in the supplied records. The practical advantage is reuse of a mature processor ecosystem; the limitation is the lack of integrated peripheral support.
おすすめ
Educational Z80 Processor Platform
The Z84C0020PEC is appropriate for educational Z80 platforms where students need to study processor architecture, memory-mapped I/O, interrupt handling, and assembly-level programming. A 20 MHz 8-bit CPU provides a clear platform for demonstrating instruction execution and system timing, while the PDIP package is easy to socket and replace in laboratory work. The design must still include suitable memory, clock, reset, and I/O interfaces. Compared with a microcontroller, the part offers direct CPU-centric learning but requires more external system design.
おすすめ
Retro-Computing and Hardware Preservation
The Z84C0020PEC can support retro-computing and hardware-preservation projects that specifically require a 20 MHz Z80 CPU in a 40-pin PDIP package. The through-hole format simplifies socketed construction, replacement, and adaptation of older motherboard or expansion-board layouts. Since the exact timing and electrical characteristics are not fully reproduced in the supplied data, preservation work should begin with the original board schematic and the manufacturer family documentation. The benefit is access to a documented legacy architecture; the trade-off is reliance on older CPU sourcing and careful verification of authenticity.
おすすめ
Embedded Sequencing Controller
The Z84C0020PEC can serve as the central sequencing controller in a legacy embedded machine when the control algorithm depends on Z80 instruction timing and existing peripheral interfaces. Its 20 MHz operating point and 8-bit architecture are useful for coordinating memory-mapped devices and deterministic control loops. The processor itself does not provide the complete control system, so power regulation, bus transceivers, memory, watchdog circuitry, and I/O devices must be designed around it. The main benefit is software continuity with Z80 systems; the limitation is the additional discrete circuitry required.
おすすめ
Communication and Bus Interface Controller
The Z84C0020PEC can be used as the CPU in a communication or bus-interface controller when an existing Z80 system architecture already defines the required memory and peripheral interfaces. The 20 MHz clock rating provides processing headroom for protocol framing, state machines, and buffered transfers, while the 8-bit CPU supports legacy Z80 software. It is not a dedicated communications controller, so protocol transceivers, memory, interrupt logic, and timing synchronization must be added externally. The key design consideration is preserving the original bus timing rather than treating the CPU MPN as a complete interface solution.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z84C0020PEC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z84C0020PEG | Z84C0020FEG | Z84C0020FEC | Z84C0020AEG |
|---|---|---|---|---|---|
| Package | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP |
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog |
主な差別化要因
- Exact verified identity as a 20 MHz 8-bit Z80 processor （vs Z84C0020PEG)
- Verified package configuration （vs Z84C0020FEG)
- Manufacturer-family documentation coverage （vs Z84C0020FEC)
設計ノート
Treat the processor rail as a legacy digital design and verify the exact operating-voltage range, supply sequencing, input-level tolerances, and decoupling requirements from the manufacturer datasheet. Do not infer the permitted voltage from the CMOS description alone. The verified records identify CMOS technology but do not provide the exact supply rating, so an incorrect rail can damage the CPU or prevent reliable operation. Confirm signal and power compatibility against the existing board before substitution.
For a 40-pin PDIP replacement, preserve the original socket or PCB footprint, pin orientation, and ground-return topology. The processor is a high-frequency digital device whose bus, clock, reset, and memory lines should be routed according to the original Z80 design practice. Check every pin against the full datasheet rather than a generic Z80 pinout. If the candidate uses a different suffix or temperature grade, verify that its asynchronous timing and signal levels remain compatible.
Keep clock and reset traces short, provide clean power and ground distribution, and account for bus capacitance and peripheral loading when using a 20 MHz Z80 CPU. The verified data does not include AC timing or output-drive details, so the safest design method is to reproduce the manufacturer's tested memory and peripheral topology. Use scope measurements at the relevant bus lines when validating a new board or a substitute CPU.
Do not substitute a functionally similar 8-bit processor merely because it has the same instruction or signal names. A valid replacement must match the 40-pin PDIP footprint, pinout, voltage, clock rating, temperature grade, and bus timing. The cross-reference search lists Zilog variants, but it does not quantify every difference. Review the manufacturer ordering information and full datasheet before purchasing a replacement, especially for industrial or extended-temperature systems.
コンプライアンス情報
The supplied web results identify the processor and sourcing pages but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields remain unknown rather than being inferred from the manufacturer or package.
