マイクロコントローラ

製品 (18750)

BA45F0082 - Fire Protection Flash MCU | Holtek Semiconductor
BA45F0082

BA45F0082 - Fire Protection Flash MCU | Holtek Semiconductor

The Holtek BA45F0082 is a Flash memory type 8-bit high performance RISC architecture microcontroller designed especially for networking fire product peripheral applications, housed in a 16-pin SOP (150-mil, NSOP) package with Flash multi-programming support and an integrated analog front end for alarm sensing. A fire protection Flash MCU is a specialized class of 8-bit microcontroller (MCU) that combines a CPU core, program memory, RAM, peripheral circuits, and analog sensing blocks into a single semiconductor device optimized for smoke detector and fire alarm system nodes. Within the power management and sensing hierarchy of a fire alarm network, these devices sit between the physical smoke/optical sensing elements and the network communication transceiver, executing measurement, filtering, threshold comparison, and alarm signaling tasks. Key features of the BA45F0082 include Flash program memory with multi-programming convenience for field updates and development iteration, a wide range of flexible peripheral functions suited to low-power battery-operated detector nodes, and an application-oriented architecture that reduces external component count in networking fire product peripherals. The device family also includes the BA45FH0082 variant and the BA45V0082 OCDS evaluation chip for in-circuit debugging. Technical architecture is based on Holtek's 8-bit high performance RISC core, which provides fast, compact instruction execution typical of Holtek's BA45 series. Analog-to-digital conversion and digital control functions are integrated on-chip, allowing the detector signal chain to be implemented largely within the MCU. The 111-page manufacturer datasheet (revision V1.10, November 19, 2019) documents the complete register set, electrical characteristics, and package information. Typical applications include networking fire alarm peripheral modules, smoke detector sensor nodes, and fire protection control interfaces where Flash reprogrammability and integrated analog sensing reduce board cost and development time. Distribution data confirms the BA45F0082-16NSOP (SOP-16, 150-mil) package is the standard ordering option. A key design consideration is lifecycle: Holtek has issued formal End Of Life (EOL) notification for the BA45F0082/BA45FH0082, with a latest purchase date of December 25, 2025. New designs should target Holtek's replacement device referenced in the EOL notice, while existing designs should secure last-time-buy inventory or qualify the replacement. This page synthesizes EOL phase-out schedule information, cross-reference guidance, distributor pricing, and family variant data not consolidated in the manufacturer datasheet alone.

見積もり お問い合わせ
BA45F6830 - CO/Gas Detector Flash MCU with Horn Driver | Holtek
BA45F6830

BA45F6830 - CO/Gas Detector Flash MCU with Horn Driver | Holtek

The Holtek Semiconductor BA45F6830 is an 8-bit A/D type Flash microcontroller purpose-built for CO and gas detector applications, integrating a 12V piezoelectric horn driver with on-chip boost converter, an LDO regulator, a buzzer driver, and a high-current LED driver. Its architecture targets the complete signal chain of a residential or industrial gas alarm in a single IC. A CO/gas detector MCU is a specialized class of 8-bit flash microcontroller that combines sensing interfaces, alarm actuation drivers, and power management on one die. In the power-management hierarchy, this device spans voltage regulation (LDO), voltage boosting (boost converter for the piezo horn), and actuator drive (buzzer, LED, horn), reducing the bill of materials for safety-critical alarm products. Key features include the integrated 12V piezoelectric horn driver fed by an on-chip boost converter, which allows alarm sounders to be driven directly from battery or low-voltage rails; a buzzer driver for secondary alert tones; a high-current LED driver for visual status indication; and programmable IOH output current. The Flash program memory supports multiple reprogramming cycles for field updates and manufacturing flexibility. The device is an A/D-type 8-bit high-performance RISC flash MCU. Its analog front-end supports sensor signal acquisition for electrochemical CO cells and catalytic or semiconductor gas sensors, while the RISC core executes alarm-logic, self-test, and calibration routines. Holtek provides an EV chip (BA45V6830) with On-Chip Debug Support (OCDS) so the real MCU device can be debugged during development, and the EV chip and real device are almost functionally identical, easing the transition from emulation to production silicon. Typical applications are standalone CO detectors, combined smoke/CO alarms, combustible gas detectors for kitchens and boilers, and portable gas warning devices where the horn driver, LED driver, and low-power MCU operation must coexist in one battery-powered product. A key design consideration is the boost converter to 12V for the piezo horn: verify horn drive current and boost inductor selection against the datasheet, and budget battery capacity for periodic self-test alarm bursts. This page synthesizes verified distributor and manufacturer data, lifecycle/EOL notices, and practical design guidance not found in a single datasheet, including drop-in replacement guidance as the device approaches its announced phase-out.

見積もり お問い合わせ
BA45F6846 - 8-bit LCD MCU with Piezo Horn Driver | Holtek
BA45F6846

BA45F6846 - 8-bit LCD MCU with Piezo Horn Driver | Holtek

The Holtek BA45F6846 is a Flash Memory A/D type 8-bit high performance RISC architecture microcontroller with a fully integrated LCD driver and an integrated piezoelectric horn driver with boost converter, designed for CO/Gas detector applications requiring an LCD/LED display function. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems within the broader hierarchy of semiconductor devices (MCU -> embedded processor -> integrated circuit -> semiconductor). The BA45F6846 belongs to Holtek's Battery A/D type 8-bit MCU family, which targets battery-powered sensing products. Key features include Flash program memory for field updates, an integrated multi-channel 12-bit ADC for sensor signal acquisition, a built-in LCD driver capable of driving display segments directly, and a unique piezoelectric horn driver with boost converter that generates the high drive voltage needed for loud alarm sounders directly from a low battery voltage. This integration eliminates external driver and boost circuitry, reducing BOM count and PCB area in alarm products. Architecturally, the device uses Holtek's proven 8-bit RISC core with efficient instruction set, low idle and sleep currents for long battery life, multiple timer modules, and comprehensive low-voltage and watchdog protection functions. The combination of analog front-end, display drive, and audio alarm drive on a single die is what distinguishes this family from generic 8-bit MCUs. Typical applications include carbon monoxide (CO) alarms, combustible gas detectors, smoke/heat alarm combinations, and other battery-powered safety products where an LCD display and a loud piezoelectric sounder are mandatory requirements under safety standards regimes. When designing with the BA45F6846, pay careful attention to sensor front-end grounding and the boost converter layout, as the horn driver switching currents can couple noise into sensitive ADC measurements if ground returns are shared. This page synthesizes datasheet information, application context, and practical design notes not found together on distributor listing pages, with verified sources cited.

見積もり お問い合わせ
BA45FH0082 - 8-bit Fire Protection Flash MCU | Holtek
BA45FH0082

BA45FH0082 - 8-bit Fire Protection Flash MCU | Holtek

The Holtek BA45FH0082 is an 8-bit high-performance RISC Flash microcontroller purpose-built for networking-type fire protection peripheral products, operating from 2.2V to 5.5V with 2KB of embedded Flash program memory, 12-bit resolution A/D capability and a 20-pin SSOP-150mil package. An 8-bit Flash MCU is a complete self-contained computing system that integrates a processor core, program memory, data memory, and peripheral functions such as timers, ADCs and serial communication interfaces on a single chip. Within the embedded systems hierarchy, the BA45FH0082 sits in the application-specific MCU segment, positioned between general-purpose 8-bit MCUs and dedicated ASIC fire-detection ICs, offering the flexibility of Flash reprogramming with detection-optimized peripherals. Key features of the BA45FH0082 include a wide 2.2V~5.5V operating voltage range that supports both battery-powered smoke alarm nodes and 5V industrial panels, 2KB of Flash program memory for application firmware with in-circuit reprogrammability, 128B of RAM for working data, and a 12-bit A/D converter suitable for sensor signal acquisition. According to Holtek documentation, the device architecture is a high-performance RISC core designed specifically for fire protection peripherals with networking capability. Technically, the RISC architecture delivers efficient one-cycle instruction execution for most instructions, while the integrated Flash memory removes the lead-time and inventory constraints of mask ROM devices. The device is RoHS compliant, supporting lead-free assembly processes. Typical applications include networked smoke and heat alarm systems, fire protection peripheral control nodes, sensor polling units in addressable fire alarm loops, and battery-operated detection devices where the wide voltage range extends operating life. Design consideration: because the device is in End-of-Life, designs should evaluate Holtek's officially recommended replacement device referenced in the EOL notification before new layouts are committed. This page synthesizes distributor pricing, EOL lifecycle data, and drop-in alternative analysis not found in the manufacturer datasheet.

見積もり お問い合わせ
BCM2711ZPKFSB06B0TT - Quad Cortex-A72 1.5GHz SoC | Broadcom
BCM2711ZPKFSB06B0TT

BCM2711ZPKFSB06B0TT - Quad Cortex-A72 1.5GHz SoC | Broadcom

The Broadcom BCM2711ZPKFSB06B0TT is a quad-core ARM Cortex-A72 (ARMv8-A, 64-bit) application processor clocked at 1.5 GHz, integrating the VideoCore VI graphics engine with 4Kp60 HEVC decode support, and packaged in a fine-pitch flip-chip BGA (FCBGA) package. It is the system-on-chip at the heart of the Raspberry Pi 4 family. An application processor (AP) is the highest-level device in the embedded computing hierarchy: system-on-chip (SoC) -> application processor -> microprocessor -> computing platform. Unlike a microcontroller, an SoC such as the BCM2711 integrates CPU cores, a graphics pipeline, a memory controller (for LPDDR4 SDRAM), and a full peripheral fabric, and is designed to boot a full operating system such as Linux. Key features include four 64-bit Cortex-A72 cores with out-of-order execution, hardware H.265/HEVC 4Kp60 decode and H.264 1080p60 encode/decode, a PCIe Gen 2 interface, dual MIPI DSI display and dual MIPI CSI-2 camera channels, USB 3.0 and USB 2.0 host support via external controllers, and a Gigabit Ethernet MAC. A rich GPIO bank and legacy BCM2835-compatible peripheral registers ease porting from earlier Raspberry Pi generations. Architecturally, the BCM2711 evolved from the earlier BCM2835/2836/2837 family: the Cortex-A72 cores replace the Cortex-A53 of the BCM2837, delivering roughly 2-3x higher CPU throughput, while the VideoCore VI raises graphics performance substantially over the VideoCore IV. The public BCM2711 ARM Peripherals datasheet (RP-008248, Raspberry Pi Trading Ltd, Version 1, 5 February 2020) documents the peripheral map for OS porting. Typical applications include single-board computers, industrial HMI and edge-AI gateways, digital signage and 4K media players, and embedded vision systems leveraging the dual CSI-2 camera interfaces. Design consideration: the FCBGA package requires controlled-impedance PCB stack-up for LPDDR4, PCIe and USB 3.0 routing, and the SoC needs an external PMIC and boot EEPROM - it is not a stand-alone module. This page adds distributor sourcing data, drop-in alternatives, and design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
BCM2711ZPKFSB06C0T - Quad-Core A72 1.5GHz SoC | Broadcom
BCM2711ZPKFSB06C0T

BCM2711ZPKFSB06C0T - Quad-Core A72 1.5GHz SoC | Broadcom

The Broadcom BCM2711ZPKFSB06C0T is a 64-bit quad-core ARM Cortex-A72 system-on-chip (SoC) running at 1.5 GHz with a VideoCore VI GPU, delivered in a fine-pitch BGA (FBGA) package designed for the Raspberry Pi 4 family of products. This is the exact processor at the heart of the Raspberry Pi 4 Model B and Compute Module 4. A system-on-chip integrates an entire computer - CPU cores, GPU, memory controller, peripheral controllers, and interconnect - onto a single silicon die. SoCs sit at the top of the embedded-computing hierarchy, combining a microprocessor, graphics processor, and microcontroller-class peripherals (GPIO, SPI, I2C, UART, PWM, DMA) into one power-optimized device. The BCM2711 is classified as an application processor / multimedia SoC for embedded and single-board-computer applications. Key features include four 64-bit ARM Cortex-A72 cores with out-of-order execution, hardware H.265 (HEVC) 4Kp60 video decode, dual-display support via two HDMI interfaces at up to 4K resolution, and a substantially upgraded peripheral set over the earlier BCM2837: a PCIe 2.0 lane (used for Gigabit Ethernet via an external LAN controller), native USB 3.0, a redesigned GPIO bank with more flexible alternate functions, and up to 8GB LPDDR4 SDRAM support on the same die via package-on-package memory stacking in end products. Architecturally, the BCM2711 uses an AMBA AXI-compatible interconnect. According to the official BCM2711 ARM Peripherals datasheet, the AXI system does not always return read data in-order; the GPU contains special logic to cope with out-of-order arrivals while the ARM core requires ordered access - a consideration critical for bare-metal OS porting. Peripherals documented in the datasheet include timers, interrupt controller, GPIO, USB, PCM/I2S, DMA controller, and I2C masters. Typical applications are single-board computers (Raspberry Pi 4 Model B), compute modules (CM4), industrial gateways, digital signage and media players leveraging 4Kp60 HEVC decode, and embedded vision or kiosk systems. Design consideration: the BCM2711 requires specific boot media (SPI boot EEPROM plus SD/eMMC) and a regulated core-voltage power tree; thermal design with a heat spreader or heatsink is recommended at sustained CPU load. Verify exact memory-density suffix and package dimensions against the Raspberry Pi technical data sheet before layout. This page synthesizes the manufacturer peripherals documentation, technical data sheet references, drop-in variant analysis, and practical design notes not consolidated in any single manufacturer document.

見積もり お問い合わせ
BCM2835IPPG - ARM11 700MHz SoC BGA | Broadcom
BCM2835IPPG

BCM2835IPPG - ARM11 700MHz SoC BGA | Broadcom

The Broadcom BCM2835IPPG is a multimedia application SoC integrating an ARM1176JZF-S processor core running at 700 MHz with a VideoCore IV GPU, housed in a small BGA package specified over -40C to +105C ambient. It is the processor at the heart of the original Raspberry Pi single-board computer. A system-on-chip (SoC) combines a CPU core, memory controller, graphics engine, and peripheral interfaces onto a single die, forming the top of the embedded processing hierarchy (SoC -> application processor -> microprocessor -> semiconductor IC). SoCs reduce board area, BOM count, and system power compared with discrete CPU-plus-chipset designs, which is why they dominate cost-sensitive multimedia and embedded Linux platforms. Key features of the BCM2835 include the ARM1176JZF-S core with a floating-point unit and 128 KB or larger L2 cache, the VideoCore IV GPU capable of hardware decode of 1080p30 H.264 video, a hardware ISP for image processing, and an integrated USB 2.0 OTG controller. The device provides 54 GPIO lines and peripheral functions including timers, an interrupt controller, PCM/I2S audio, UART, SPI, and I2C, as documented in the manufacturer datasheet covering Timers, Interrupt controller, GPIO, USB, PCM/I2S (205 pages). Architecturally, the BCM2835 couples the ARM11 CPU to the VideoCore IV graphics and multimedia pipeline through shared SDRAM. The GPU handles boot initialization, graphics acceleration (OpenGL ES 2.0 and OpenVG), and fixed-function video codecs, allowing the CPU to focus on application workloads. The board-level SDRAM interface and peripheral muxing are defined in the BCA ballout documented in the datasheet. Typical applications include single-board computers, embedded Linux HMIs, digital signage players, IP camera and video capture systems, industrial control panels, and educational computing platforms. The hardware H.264 engine and ISP make the part especially well suited to video-centric designs that must remain within a low bill-of-materials budget. Designers should treat the BCM2835IPPG as a board-level design: SDRAM, power rails, clocking, and boot flash must be implemented per the reference schematics in the manufacturer datasheet, and BGA assembly requires controlled-impedance, fine-pitch PCB processes. This page synthesizes distributor stock listings, the 205-page manufacturer datasheet reference, and sourcing notes for the BCM2835IPPG in one place, information not consolidated on any single distributor page.

見積もり お問い合わせ
BCM2835RIPPG - ARM11 700MHz SoC | Broadcom | Embedded
BCM2835RIPPG

BCM2835RIPPG - ARM11 700MHz SoC | Broadcom | Embedded

The Broadcom BCM2835RIPPG is the BCM2835 system-on-chip (SoC) supplied in the proprietary BGA package identified by the IPPG ordering code. The BCM2835 integrates an ARM1176JZF-S application processor core with a VideoCore IV graphics and multimedia engine, together with timers, an interrupt controller, GPIO, USB, and PCM/I2S peripherals, as described in the manufacturer datasheet. A system-on-chip is a single integrated circuit that consolidates the CPU, GPU, memory controller, and peripheral functions that traditionally occupied multiple chips. SoCs sit at the top of the embedded processing hierarchy (SoC -> microprocessor unit -> integrated circuit -> semiconductor), and the BCM2835 is the device class popularized by the original Raspberry Pi single-board computer, where it handled general-purpose Linux execution plus 1080p-class video decode through VideoCore IV. Key features of the BCM2835 family include the ARM1176JZF-S core, which provides an ARMv6 instruction set, an FPU, and JTAG debug; the VideoCore IV multimedia processor for graphics and video; and a rich peripheral set covering GPIO banks, I2C, SPI, UART, USB 2.0 host/device, and PCM/I2S audio. The IPPG suffix on this MPN identifies Broadcom's packaged ordering option; the specific package dimensions and pin count for this ordering code are not published in the verified data and are marked accordingly in the specifications table. Architecturally, the BCM2835 couples the general-purpose ARM core to a shared memory system and a dedicated multimedia subsystem, allowing Linux workloads and real-time video/audio pipelines to proceed concurrently. Peripheral functions are memory-mapped, and the datasheet documents register-level access for timers, the interrupt controller, GPIO, USB, and PCM/I2S blocks. Typical applications include single-board computers, embedded multimedia players, industrial HMI and kiosk controllers, and educational/prototyping platforms where GPIO plus Linux-class processing are required in one device. A key design consideration is that the ARM1176 is an ARMv6-class core; software stacks must be built for ARMv6 rather than ARMv7/ARMv8, and sourcing for this legacy SoC should be validated early in a project lifecycle. This page synthesizes distributor availability from Octopart and multiple brokers, datasheet provenance, and drop-in-alternative analysis not found on a single manufacturer page.

見積もり お問い合わせ
BCM2836IFBG - Quad-Core ARM SoC, BGA | Broadcom
BCM2836IFBG

BCM2836IFBG - Quad-Core ARM SoC, BGA | Broadcom

The Broadcom BCM2836IFBG is a quad-core ARM Cortex-A7 system-on-chip (SoC) running at 900 MHz with the VideoCore IV multimedia GPU, supplied in a BGA package. It is the processor used in the Raspberry Pi 2 Model B and integrates the CPU, GPU, SDRAM interface, peripherals, and boot ROM on a single die. A system-on-chip (SoC) is a highly integrated semiconductor that combines the functions of a computer system - processor cores, memory controller, graphics engine, and I/O interfaces - into a single package. Within the product hierarchy, the BCM2836 is an application processor belonging to the Broadcom BCM28xx multimedia SoC family, positioned above general-purpose microcontrollers and below application processors with integrated large DRAM. The BCM2836 succeeded the single-core BCM2835 by replacing the ARM11 core with a quad-core Cortex-A7 cluster, delivering roughly a sixfold increase in CPU throughput while retaining the same VideoCore IV GPU and peripheral set. Key features include four ARM Cortex-A7 cores with NEON SIMD and VFPv4 floating point, a 32 KB L1 instruction/data cache per core, a 512 KB shared L2 cache, the VideoCore IV GPU with 1080p30 H.264 decode capability, and peripheral blocks such as GPIO, UART, SPI, I2C, USB 2.0 (via a hub/LAN9514 companion on Raspberry Pi boards), timers, interrupt controller, and PCM/I2S audio interfaces. Per the public Broadcom BCM2835/BCM2836 peripheral documentation, memory ordering, GPIO, and interrupt architecture are shared across the family, easing software migration from BCM2835 designs. The BCM2836 architecture pairs the Cortex-A7 MPCore cluster with the VideoCore IV graphics pipeline and a shared memory system clocked by an LPDDR2 SDRAM controller. The partitioning allows Linux (Raspbian/Raspberry Pi OS, 32-bit ARMv7) to run on the ARM cores while the GPU handles graphics, camera ISP, and secure boot duties, with firmware-loaded kernel images delivered from the SD card boot flow used in Raspberry Pi products. Typical applications include single-board computers, embedded HMI and digital signage controllers, industrial gateways, and multimedia set-top platforms - use cases that need 1080p video, USB connectivity, and a mature Linux ecosystem on a cost-effective SoC. A key design consideration is thermal and power management: the four Cortex-A7 cores at 900 MHz typically require a 5 V, 2 A-class supply in reference designs, and under sustained multi-core load a heat spreader or airflow is recommended in enclosed enclosures. This page synthesizes distributor sourcing data, drop-in family alternatives, and practical design notes not found in the manufacturer documentation.

見積もり お問い合わせ
BCM2836RIFBG - Quad-Core Cortex-A7 SoC 900MHz | Broadcom
BCM2836RIFBG

BCM2836RIFBG - Quad-Core Cortex-A7 SoC 900MHz | Broadcom

The Broadcom BCM2836RIFBG is a quad-core ARM Cortex-A7 system-on-chip (SoC) running at 900 MHz with an integrated VideoCore IV GPU, housed in a ball grid array (BGA) package. This SoC is the application processor used on the Raspberry Pi 2 Model B and combines CPU, GPU, memory controller, and multimedia peripherals on a single die. A system-on-chip is an integrated circuit that integrates all major functional blocks of a computing system onto one die: processor cores, graphics acceleration, memory interface, peripheral controllers, and interconnect fabric. SoCs sit at the top of the embedded processor hierarchy (SoC -> application processor -> microprocessor -> semiconductor) and eliminate the need for discrete CPU, GPU, and controller chips in compact designs. Key features of the BCM2836 include four ARM Cortex-A7 cores with NEON SIMD and VFPv4 floating-point units, 32 KiB L1 instruction and data caches per core, and a shared 512 KiB L2 cache. The VideoCore IV graphics core supports 1080p30 H.264 decode and OpenGL ES 2.0-class 3D graphics. Peripheral set includes USB 2.0 host/OTG, 10/100 Ethernet MAC support via companion PHY, UART, SPI, I2C, PWM, and general-purpose I/O banks. The architecture pairs the Cortex-A7 cluster with the proprietary VideoCore IV multimedia engine, connected by an internal bus fabric. Boot code resides in on-chip ROM, with secondary bootloader loaded from external storage such as an SD card. Typical applications include single-board computers, embedded Linux gateways, industrial HMIs, digital signage players, and multimedia IoT nodes requiring 1080p video output. Design consideration: the BCM2836 is supplied under restricted documentation; full electrical and ballout details are available from Broadcom under NDA, so board design should reference the Raspberry Pi 2 reference schematics. This page synthesizes distributor availability, family alternatives, and practical design guidance not found in publicly restricted datasheets.

見積もり お問い合わせ
BCM2837B0IFSBG - Quad-Core Cortex-A53 SoC BGA | Broadcom
BCM2837B0IFSBG

BCM2837B0IFSBG - Quad-Core Cortex-A53 SoC BGA | Broadcom

The Broadcom BCM2837B0IFSBG is a quad-core ARM Cortex-A53 application processor (SoC) supplied in a BGA package. According to the BCM2837 datasheet from Broadcom, the BCM2837 is an A53 processor built around four 64-bit ARM Cortex-A53 CPU cores integrated with a multimedia GPU and system peripherals on a single die. An application processor SoC is the highest level of integration in the semiconductor hierarchy: within a power-management and computing hierarchy it combines a central processing unit (CPU), graphics processing unit (GPU), memory interfaces, and I/O peripherals into one chip, replacing the multi-chip solutions of earlier embedded boards. SoCs of this class sit above microcontrollers in capability and are the computational heart of single-board computers, embedded media systems, and industrial gateways. Key features of the BCM2837 family include its quad-core Cortex-A53 architecture supporting 64-bit ARMv8-A execution, an integrated multimedia GPU for video and graphics acceleration, and a peripheral set documented in the Broadcom 'BCM2835 ARM Peripherals' manual that also covers the BCM2837 die. The BGA package provides a dense, low-inductance surface-mount interconnect suited to high-speed memory and interface routing. Architecturally, the BCM2837B0 pairs the A53 cluster with Broadcom's VideoCore-class multimedia engine, allowing Linux-based operating systems to run while hardware blocks handle video decode, 3D graphics, and camera input. This split between general-purpose cores and fixed-function accelerators is what made the BCM2837 family the processor of choice for the Raspberry Pi 3 generation of boards. Typical applications include single-board computers, embedded HMI and display systems, industrial IoT gateways, digital signage media players, and networked camera or kiosk designs where a Linux-capable processor with graphics output is required in a compact footprint. A key design consideration with this BGA device is that it is a raw SoC requiring external boot media (SD/eMMC), power rails, and memory configuration; board bring-up must follow the reference schematic in the Broadcom documentation, and reflow assembly requires BGA-capable processes and X-ray inspection. This page synthesizes distributor sourcing data, same-family drop-in cross references, and practical design notes not found in the manufacturer datasheet, providing procurement and engineering context in one place.

見積もり お問い合わせ
BCM2837RIFBG - Quad Cortex-A53 1.2GHz SoC | Broadcom
BCM2837RIFBG

BCM2837RIFBG - Quad Cortex-A53 1.2GHz SoC | Broadcom

The Broadcom BCM2837RIFBG is a quad-core ARM Cortex-A53 system-on-chip running at 1.2 GHz and delivering approximately 2760 DMIPS per core, housed in a ball grid array (BGA330) package. It is the processor used in the Raspberry Pi 3 family of single-board computers. A system-on-chip (SoC) integrates all major functional blocks of a computing system onto a single silicon die, combining CPU cores, graphics processing, memory interfaces, and peripheral controllers. In the embedded hierarchy, the BCM2837 sits above microcontrollers and below multi-core application processors for mobile devices, targeting cost-sensitive Linux-capable embedded platforms. Key features include four 64-bit ARM Cortex-A53 cores clocked at 1.2 GHz, a Broadcom VideoCore IV GPU capable of hardware-accelerated graphics and 1080p video decode, and a rich peripheral set including USB 2.0, CSI camera and DSI display interfaces, and general-purpose I/O. The 64-bit ARMv8-A architecture allows execution of both 32-bit and 64-bit operating systems, with mainstream Linux support via the Raspberry Pi OS. Architecturally, the BCM2837 couples the quad-core Cortex-A53 cluster to the proven BCM283x peripheral complex originally developed for the BCM2835. This preserves software compatibility with earlier Raspberry Pi generations while multiplying compute throughput roughly tenfold. The VideoCore IV GPU also services camera and display pipelines, offloading video workloads from the CPU cores. Typical applications include single-board computers, industrial IoT gateways, digital signage players, kiosk controllers, HMI panels, and educational computing platforms. Its Linux ecosystem, broad community support, and integrated GPU make it well suited to products that need a full OS with multimedia capability. Design consideration: as a BGA-packaged SoC, the BCM2837RIFBG requires controlled-impedance PCB stackups for LPDDR2 memory routing, precise power sequencing, and careful thermal management, since the processor load can raise die temperature substantially in enclosed enclosures. Refer to the Raspberry Pi Foundation reference designs for proven power-tree implementations. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing references as of 2026-09-14.

見積もり お問い合わせ
BCM2837RIFBGT - Quad-Core A53 SoC 1.2GHz | Broadcom
BCM2837RIFBGT

BCM2837RIFBGT - Quad-Core A53 SoC 1.2GHz | Broadcom

The Broadcom BCM2837RIFBGT is a quad-core ARM Cortex-A53 system-on-chip (SoC) running at 1.2 GHz with the Broadcom VideoCore IV GPU, housed in a BGA package and delivered in tape-and-reel format. It is the application processor used in the Raspberry Pi 3 family of single-board computers. A system-on-chip integrates the CPU cores, graphics processor, memory controller, and peripheral interfaces onto a single silicon die, forming the top of the embedded processor hierarchy (SoC -> application processor -> microprocessor -> integrated circuit). In the BCM2837, four 64-bit ARM Cortex-A53 cores provide the general-purpose compute, while the VideoCore IV graphics engine accelerates 2D/3D graphics and video decode, offloading display workloads from the CPU. Key characteristics include 64-bit ARMv8-A architecture with quad-core symmetric multiprocessing, integration of the VideoCore IV GPU supporting HD-class graphics, and a peripheral set historically documented in the Broadcom BCM283x ARM Peripherals datasheet, a 205-page document covering GPIO, UART, SPI, I2C, PWM, USB, and display interfaces. The BCM283x family shares a common register map across BCM2835, BCM2836, and BCM2837, easing software porting across generations. Architecturally, the BCM2837 couples the Cortex-A53 quad cluster to on-chip interconnect and memory subsystems with the VideoCore IV acting as a co-processor for boot, graphics, and multimedia. Raspberry Pi documentation confirms the same silicon die was later repackaged with 512 MB of DRAM as the RP3A0 SiP used in the Raspberry Pi Zero 2 W, underscoring the maturity of the BCM2837 platform. Typical applications include single-board computers and embedded Linux gateways, industrial HMI and digital signage controllers, IoT edge devices, and educational computing platforms. The quad-core A53 delivers sufficient headroom for headless servers, media playback, and networked sensor aggregation. Design consideration: BGA packages demand controlled-impedance PCB stack-ups, precise land patterns, and reflow assembly; plan power distribution and decoupling carefully around the dense ball field, and verify the exact BGA ball count and footprint from the manufacturer package drawing before layout. This page synthesizes distributor pricing, same-family cross-references, and practical design notes not found in the manufacturer datasheet.

見積もり お問い合わせ
BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek
BH67F5362A

BH67F5362A - 24-bit Delta-Sigma A/D LCD Flash MCU | Holtek

The Holtek Semiconductor BH67F5362A is a high-performance 8-bit RISC Flash microcontroller with an integrated 24-bit Delta-Sigma analog-to-digital converter and an LCD driver, engineered for high-precision measurement products such as electronic scales, blood pressure meters, clinical thermometers, and industrial meters. It supports a system clock up to 16 MHz delivering up to 0.25 µs instruction cycle at VDD = 5 V, and is housed in an LQFP-64 package (10 mm × 10 mm, 0.5 mm pitch). Wide operating voltage from 1.8 V to 5.5 V at 8 MHz scales up to 3.3 V–5.5 V at 16 MHz, and the part integrates multi-programmable Flash program memory, RAM data memory, and true EEPROM for non-volatile calibration and serial-number storage. A microcontroller with an integrated 24-bit Delta-Sigma ADC is part of the precision-measurement MCU category, which sits hierarchically within MCU -> microcontroller -> embedded controller -> semiconductor. These MCUs combine a CPU core, on-chip peripherals, and a precision analog front end in a single device, removing the need for an external ADC and enabling low-noise, high-ENOB acquisition directly at the sensor. Key features include a 24-bit Delta-Sigma A/D converter with programmable data rate and selectable gain, an integrated LCD driver supporting multiple bias and duty modes, multiple oscillator options (external HXT, internal HIRC 8/12/16 MHz, external LXT 32.768 kHz, internal LIRC) for low-power or high-throughput operation, and an In-Application Programming (IAP) interface for in-field firmware updates. Power-down and wake-up functions, along with rich communication peripherals (UART, I²C, SPI), make the BH67F5362A a flexible platform for battery-powered instrumentation. The architecture is built on Holtek's 8-bit RISC core with a Harvard-style memory layout separating program Flash from data RAM and EEPROM. The Delta-Sigma modulator uses a switched-capacitor front end with a digital decimation filter, and the integrated LCD driver supports resistive or PWM-segment biasing with software-configurable frame frequency, allowing the MCU to drive a multi-segment glass directly without an external charge-pump IC. Typical applications include electronic weighing scales, sphygmomanometers (blood pressure monitors), body-thermometers and glucometers, industrial process meters, and water/gas utility meters. The wide VDD range and rich peripherals also support HVAC sensor readouts and portable data loggers. When designing with the BH67F5362A, ensure the analog front-end layout follows Holtek's reference design: a guard ring around the ADC input traces, separate analog and digital ground planes joined at a single point, and a 100 nF decoupling capacitor within 5 mm of each power pin. Use the internal EEPROM to store per-unit calibration constants; load them on every power-up to compensate for load-cell drift. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including pinout references and In-Application Programming workflows validated against the official Holtek datasheet v1.10.

見積もり お問い合わせ
BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor
BH67F5372A

BH67F5372A - 24-Bit ADC LCD Flash MCU | Holtek Semiconductor

The Holtek Semiconductor BH67F5372A is a 24-bit Delta-Sigma A/D LCD Flash microcontroller built on an 8-bit high-performance RISC architecture, packaged in an LQFP-64 housing. It integrates a multi-channel 12-bit A/D converter, an analog comparator, a 24-bit Delta-Sigma A/D converter with programmable gain amplifier, a built-in LCD driver, and flexible Timer Modules supporting timing, pulse generation, and PWM functions. The integrated 24-bit Delta-Sigma ADC is designed for high-precision differential measurement of low-frequency analog signals. What is an A/D Flash MCU? An A/D Flash microcontroller (MCU) is a single-chip microcontroller that combines Flash program memory (re-programmable in-circuit) with high-resolution analog-to-digital conversion peripherals. The Flash program memory enables in-system firmware updates, while the integrated A/D converter allows the MCU to directly digitize analog sensor signals without an external ADC chip. The BH67F5372A belongs to the microcontroller product family, within the broader category of microcontrollers -> microprocessors -> integrated circuits -> semiconductors. Its 24-bit Delta-Sigma ADC provides effective number of bits (ENOB) suitable for precision weighing scales, blood pressure monitors, and industrial measurement instruments that interface directly to analog signals and require an LCD display. Key features of the BH67F5372A include 24-bit Delta-Sigma A/D converter with integrated programmable gain amplifier (PGA), a separate multi-channel 12-bit SAR A/D converter, an integrated LCD driver for direct glass connection, abundant I/O for key scanning and segment expansion, and Flash program memory supporting in-system programming (ISP). Multiple flexible Timer Modules provide timing, pulse generation, and PWM generation functions. Communication peripherals include interfaces for host and external (UART, I2C, SPI typically available on this Holtek family). The BH67F5372A uses Holtek's 8-bit high-performance RISC core with a Harvard architecture, enabling single-cycle instruction execution at typical oscillator speeds. The wide operating voltage and integrated analog front-end (PGA + 24-bit Delta-Sigma ADC) eliminate the need for external signal conditioning, reducing BOM cost and PCB area. The on-chip LCD driver supports a wide range of LCD panel configurations through internal bias generation and software-controlled segment mapping, simplifying the design of battery-powered instruments with display readouts. Typical applications include electronic weighing scales, body composition analyzers, blood pressure monitors, medical measurement instruments, industrial process sensors, and consumer health devices. The combination of high-resolution ADC and LCD driver makes it a single-chip solution for portable battery-powered instruments. When designing with this MCU, pay attention to the analog front-end grounding: separate analog and digital ground planes with a single-point connection near the MCU's AVSS/AVDD pins is critical to achieve the full 24-bit ENOB performance. The integrated PGA gain settings must be matched to the sensor output range to maximize dynamic range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. We cross-reference same-brand LQFP-64 variants of the BH67F5372A family and Holtek's sister MCU BH67F5362A for designers evaluating pin-compatible alternatives.

見積もり お問い合わせ
BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP
BSC9131NJE1HHHB

BSC9131NJE1HHHB - QorIQ Qonverge SoC, 800MHz e500 + StarCore | NXP

The NXP (formerly Freescale) BSC9131NJE1HHHB is a QorIQ Qonverge heterogeneous SoC that pairs an 800 MHz Power Architecture e500 microprocessor core with an 800 MHz StarCore SC3850 DSP core and a MAPLE-B2F baseband accelerator, housed in a 520-pin FCBGA (21x21 mm) package and rated for the -40C to +105C industrial/extended temperature range. A QorIQ Qonverge SoC is a heterogeneous communications processor that combines a control-plane general-purpose CPU, a signal-processing DSP core, and hardware acceleration for baseband or packet processing in a single die. The BSC9131 specifically targets small-cell wireless base stations and other line-card applications where latency-sensitive control and high-throughput DSP must coexist on one chip, simplifying board design versus a discrete CPU + DSP architecture. Key features include: 1x e500 core at 800 MHz for control-plane code, 1x SC3850 StarCore DSP at 800 MHz for PHY/baseband processing, an integrated MAPLE-B2F baseband accelerator, DDR3 memory controller with ECC, integrated SEC (Security Engine) for IPsec/cryptographic offload, dual 10/100/1000 Ethernet MACs, multiple SerDes lanes for SGMII/PCIe, and a temperature range of -40C to +105C. The 520-pin FCBGA package exposes the full SerDes, Ethernet, DDR3, and JTAG interfaces needed for small-cell line cards. Architecturally, the e500 core runs the control-plane operating system and management stack while the SC3850 + MAPLE-B2F combination offloads L1/L2/L3 baseband DSP and Turbo/FFT operations, reducing overall BOM and power versus two discrete chips. SEC hardware accelerates encryption/decryption for secure backhaul links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP gateways, smart-grid control nodes, and defense/industrial signal-processing platforms that need combined control + DSP on one SoC. When designing with this device, plan PCB layout for the 520-ball FCBGA carefully - 0.8 mm or finer pitch BGA escape routing, controlled-impedance SerDes traces, and a multilayer stack-up with dedicated ground/power planes are required for signal integrity on DDR3 and SGMII links. This page synthesizes distributor pricing, lifecycle status, and design considerations beyond the manufacturer datasheet, helping engineers evaluate the BSC9131NJE1HHHB for current and legacy designs.

見積もり お問い合わせ
BSC9131NJE7HHHB 800MHz QorIQ SoC | NXP | Communications
BSC9131NJE7HHHB

BSC9131NJE7HHHB 800MHz QorIQ SoC | NXP | Communications

The NXP BSC9131NJE7HHHB is a QorIQ Qonverge system-on-chip with an 800 MHz StarCore SC3850 DSP, an 800 MHz Power e500 CPU, a MAPLE-B2F accelerator, and DDR3 support in a 520-FCBGA package measuring 21 mm by 21 mm. It targets small-cell base stations, enterprise VoIP, smart-grid control, military and defense, and industrial systems. Its integrated architecture combines general-purpose control, specialized DSP processing, and accelerator resources while operating from -40°C to +105°C. A QorIQ Qonverge SoC is a highly integrated communications processor that consolidates one or more processor cores, memory interfaces, security functions, accelerators, and dedicated communications resources into one semiconductor device. Such devices sit between general-purpose microprocessors and dedicated digital signal processors: they provide software-configurable real-time processing for packet handling, baseband workloads, voice systems, and control tasks without requiring several separate chips. The verified product information identifies an 800 MHz StarCore SC3850 core, an 800 MHz Power e500 CPU core, and MAPLE-B2F specialist DSP acceleration. It also identifies DDR3 memory support and SEC security capability. The BSC9131 is therefore suited to systems that combine control-plane processing with throughput-intensive communications or signal-processing work. Its operating-temperature range of -40°C to +105°C supports industrial and defense-oriented environments, although individual system qualification remains necessary. The package is a 520-FCBGA, 21 mm by 21 mm component. Such a large ball-grid package supports the device's extensive processor, accelerator, memory, and I/O resources but demands careful PCB escape routing, multilayer interconnect, power delivery, and thermal design. The verified data does not provide core voltages, cache sizes, memory width, I/O counts, power limits, pin names, or ball assignments, so these details must be confirmed in the official NXP documentation before schematic capture or layout. Typical deployments include small-cell base-station processing, enterprise VoIP equipment, smart-grid controllers, industrial automation systems, and military or defense platforms. Its value is architectural integration: software can allocate work among the e500 CPU, StarCore DSP, and MAPLE-B2F accelerator instead of requiring separate processors connected through external interfaces. This can reduce board-level component count while preserving specialized throughput. For new PCB designs, treat the 520-FCBGA as a complex system-in-package-scale device requiring controlled power sequencing, high-speed memory routing, extensive via connectivity, and thermal analysis. Because the part is marked end of life by NXP, production continuity and software support require review of NXP's discontinuation and replacement information. This page synthesizes current distributor availability, lifecycle data, technical positioning, and sourcing constraints. Before approving a design, verify the official NXP part page and datasheet for electrical limits, memory topology, interface multiplexing, ball assignments, reference power design, and software requirements. Distributor inventory does not establish long-term availability, and an end-of-life processor may require last-time-buy planning or a redesign rather than a simple drop-in substitution.

見積もり お問い合わせ
BSC9131NJN1HHHB - 800MHz QorIQ Qonverge SoC | NXP | Small Cell
BSC9131NJN1HHHB

BSC9131NJN1HHHB - 800MHz QorIQ Qonverge SoC | NXP | Small Cell

The NXP Semiconductor (formerly Freescale) BSC9131NJN1HHHB is a highly integrated QorIQ Qonverge SoC combining a PowerPC e500 CPU core at 800 MHz, a StarCore SC3850 DSP core at 800 MHz, and a MAPLE-B2F hardware accelerator, housed in a 520-pin FCBGA (21x21 mm) package. The device is manufactured in 45 nm process technology and integrates DDR3/DDR3L memory controllers along with multiple high-speed serial interfaces targeted at small cell base stations, enterprise VoIP gateways, smart grid control nodes, and industrial control systems. A QorIQ Qonverge SoC is a heterogeneous multiprocessor system-on-chip that unifies general-purpose CPU control code, real-time DSP baseband processing, and dedicated hardware acceleration (such as MAPLE-B2F for LTE turbo/decoding) onto a single die. This architecture allows telecom OEMs to reduce board area, BOM cost, and power consumption compared to multi-chip FPGA-plus-DSP designs, while keeping the control plane and data plane tightly coupled for deterministic latency on Layer-1 baseband workloads. Key features of the BSC9131NJN1HHHB include 800 MHz dual-issue e500 CPU core, 800 MHz SC3850 VLIW DSP with dual MAC units, MAPLE-B2F accelerator for LTE turbo and Viterbi decoding, DDR3/DDR3L memory controller with ECC support, two RGMII gigabit Ethernet MACs, three multi-protocol serdes lanes (up to 3.125 GHz supporting CPRI and OBSAI for backhaul and antenna interfaces), and an industrial operating temperature range of -40 C to +105 C. The 45 nm CMOS process provides a balance of static and dynamic power for fan-less small cell enclosures. Typical applications of the BSC9131NJN1HHHB include small cell LTE/eNodeB base stations where the e500 handles L2/L3 control while the SC3850 plus MAPLE-B2F accelerate LTE turbo/Viterbi decoding in real time; enterprise VoIP media gateways benefiting from integrated DSP for echo cancellation and transcoding; smart grid substation controllers combining protocol stack (IEC 61850, DNP3) processing with deterministic DSP packet handling; and industrial defense systems requiring reliable operation across an extended thermal envelope. When designing with this device, allocate careful attention to power-rail sequencing, DDR3L termination, and thermal management of the 21x21 mm FCBGA. The device is reaching end-of-life from NXP, so plan supply continuity, second-source qualification, or last-time-buy orders with NXP or authorized distributors well in advance of PCN deadlines. When evaluating longevity, note that the BSC9131 family is targeted by NXP with a documented End-of-Life notice; migration paths should be explored through NXP QorIQ successors such as the B series or LS series communications processors depending on the workload profile. The package is not a drop-in replacement for newer QorIQ families and will require PCB and BSP rework. This page synthesizes distributor pricing, lifecycle status, application guidance, and cross-reference alternatives not found in the manufacturer datasheet alone - giving engineers and procurement teams a single reference for design decisions, sourcing, and obsolescence planning.

見積もり お問い合わせ
BSC9131NLE7HHHB - 800MHz e500 SoC | NXP
BSC9131NLE7HHHB

BSC9131NLE7HHHB - 800MHz e500 SoC | NXP

The NXP Semiconductors BSC9131NLE7HHHB is a QorIQ Qonverge system-on-chip with one 32-bit 800 MHz PowerPC e500 core, an 800 MHz StarCore SC3850 DSP, and MAPLE-B2F accelerator processing, housed in a 520-FCBGA package measuring 21 x 21 mm. It includes DDR3 memory support, security features, and a specified 0°C to 105°C temperature range. These headline values identify it as a highly integrated communications and industrial processor rather than a general-purpose microcontroller. A QorIQ Qonverge SoC combines a general-purpose processor core, a digital signal processor, dedicated accelerator logic, memory controllers, and communications-oriented interfaces on one semiconductor device. The BSC9131 combines Power e500 and StarCore SC3850 core technologies with MAPLE-B2F specialist DSP acceleration. This hierarchy places it between a microprocessor and a specialized communications processor, allowing control-oriented code and time-critical signal processing to share one integrated platform. Key features include the single 800 MHz e500 processor core, the 800 MHz StarCore DSP, and MAPLE-B2F accelerator support. The device also provides DDR3 memory support, security capabilities identified by NXP as SEC, and a 0°C to 105°C operating-temperature specification. Its 520-ball flip-chip BGA package supports dense board-level integration, although its 520 contacts and 21 x 21 mm body require careful escape routing and board-layout verification. The architecture addresses workloads that require more specialized processing than a conventional microcontroller can provide. The PowerPC e500 core can execute operating-system-level control software, while the StarCore SC3850 core and MAPLE-B2F accelerator target DSP and communications tasks. Dividing these workloads across dedicated engines can improve suitability for base-station, packet-processing, voice-over-IP, industrial-control, and defense-related equipment, subject to software and memory-system support. Typical applications include small-cell base stations, enterprise VoIP platforms, smart-grid control systems, military and defense equipment, and industrial systems. The integrated 800 MHz e500 core, 800 MHz StarCore DSP, MAPLE-B2F acceleration, and DDR3 support align particularly well with embedded communications designs that need both general-purpose control and specialized digital signal processing in one package. The primary design constraint is package complexity. A 520-FCBGA device requires a matching land pattern, controlled escape routing, power and ground-plane integrity, and assembly-process capability. Software teams must also verify DDR3 topology, boot requirements, clocking, security configuration, thermal performance, and peripheral availability for the exact product revision before committing to production hardware. This page consolidates the verified manufacturer and distributor identity, package, processor architecture, memory support, operating range, lifecycle information, and sourcing links for BSC9131NLE7HHHB. It also distinguishes verified drop-in alternatives from unsupported cross-reference candidates so engineers can avoid assuming that a similar processor is electrically and mechanically interchangeable.

見積もり お問い合わせ
BSC9131NLN1HHHB - 800MHz e500 Processor | NXP
BSC9131NLN1HHHB

BSC9131NLN1HHHB - 800MHz e500 Processor | NXP

The NXP BSC9131NLN1HHHB is a QorIQ Qonverge system-on-chip with a 32-bit 800 MHz PowerPC e500 microprocessor core and an 800 MHz StarCore DSP in a 520-FCBGA package. The verified distributor data identifies one core, a 21 mm by 21 mm package, MAPLE-B2F acceleration, integrated IFC, DDR3 support, and a 0°C to 105°C temperature range. A system-on-chip, or SoC, integrates a processor core, memory interfaces, communications peripherals, and optional accelerators into one semiconductor package. Within the QorIQ product hierarchy, the BSC9131 combines the PowerPC e500 CPU, a StarCore DSP, MAPLE-B2F acceleration, IFC, and DDR3 support. This integration allows communications and embedded systems to execute control, signal-processing, and network workloads with one highly integrated device. The verified product data highlights an 800 MHz e500 CPU, an 800 MHz StarCore DSP, MAPLE-B2F acceleration, integrated IFC, and DDR3 memory support. These functions suit workloads that require dedicated digital signal processing alongside general-purpose network processing. The 520-FCBGA package provides a large, complex interconnect surface, so PCB escape routing, power delivery, thermal design, and manufacturing validation require careful planning. BSC9131NLN1HHHB is positioned for small-cell base stations, enterprise VoIP, smart-grid control, military and defense systems, and industrial applications. In these systems, the CPU can manage protocol and control tasks while the StarCore DSP accelerates signal-processing workloads. MAPLE-B2F acceleration provides another dedicated compute resource, while IFC and DDR3 interfaces support connected equipment and memory-intensive data paths. A critical design consideration is that a 520-FCBGA is not a low-pin-count or low-risk package. Power rails, high-speed memory routing, thermal paths, and ball-assignment verification must follow the official device documentation and validated hardware design. Do not infer compatible regulators, memory devices, or peripheral ICs from general processor specifications without checking the manufacturer data. This page consolidates verified distributor specifications, sourcing information, application context, and design cautions for BSC9131NLN1HHHB. It does not substitute for the complete NXP hardware manual, reference design, package drawing, or board-support package. Pricing reflects the supplied market observations as of 2026-10-23 and should be reconfirmed before procurement.

見積もり お問い合わせ
BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP
BSC9131NSE1KHKB

BSC9131NSE1KHKB - QorIQ Qonverge SoC, 1GHz e500 + SC3850 | NXP

The NXP Semiconductors BSC9131NSE1KHKB is a QorIQ Qonverge heterogeneous SoC combining a 1 GHz PowerPC e500 core and a 1 GHz StarCore SC3850 DSP core in a 520-pin FCBGA (21x21) package, manufactured on a 45 nm CMOS process. It integrates a MAPLE-B2F baseband accelerator, DDR3/DDR3L memory controller, IFC, SEC 4.4 security engine, and dual GbE networking for small-cell base stations. The device is part of the QorIQ Qonverge BSC9131 family, designed for high-performance low-power baseband processing. A heterogeneous multiprocessor SoC integrates two or more different processor core types (in this case a PowerPC host and a DSP) plus dedicated hardware accelerators on a single die. This architecture is widely used in wireless base stations where one core runs control-plane OS tasks (Linux/VxWorks) while the DSP executes PHY-layer signal processing, allowing deterministic real-time DSP latency alongside flexible application code on the host CPU. The BSC9131NSE1KHKB specifically targets small cell, enterprise femtocell, smart grid, military/defense, and industrial control applications per NXP product documentation. Key features include a dual-core heterogeneous compute complex (1 GHz e500 at 32-bit + 1 GHz SC3850 DSP), a MAPLE-B2F turbo/Viterbi baseband accelerator, DDR3/DDR3L memory controller with ECC support, integrated SEC 4.4 security engine, integrated flash controller (IFC), dual GbE, 0-105C extended operating temperature grade, and 520-ball FCBGA packaging. Per NXP product documentation, the device is targeted at small cell base station, enterprise VoIP, smart grid control, military/defense, and industrial control applications. The BSC9131 architecture combines an e500mc-style host processor for control plane and an SC3850 DSP for PHY processing, allowing designers to run a real-time OS (Linux or VxWorks) on the e500 while dedicating the SC3850 to deterministic baseband DSP. The MAPLE-B2F accelerator offloads Turbo/Viterbi convolutional decoding, freeing DSP cycles for higher-layer PHY tasks and reducing overall system power. Typical applications include LTE/HSPA/WiMAX small cell base stations (femtocell, picocell, microcell), enterprise VoIP gateways, smart grid protection and control equipment, military/defense radio platforms, and industrial real-time control systems. The BSC9131 is typically used as the main baseband SoC with companion RF transceivers and analog front ends. When designing with this device, ensure proper thermal management via PCB copper pours and thermal vias to the FCBGA substrate. Use ECC-enabled DDR3L with matched trace lengths for the DDR interface, and validate boot configuration via the IFC/serial boot path. Power sequencing must follow NXP's reference design for proper core and I/O rail ramp order. This page synthesizes distributor inventory, drop-in NXP Qonverge alternatives, and practical design guidance not collated in the manufacturer datasheet, helping engineers evaluate lifecycle risk and second-source options for end-of-life planning.

見積もり お問い合わせ
BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP
BSC9131NSN1KHKB

BSC9131NSN1KHKB - QorIQ Qonverge SoC, 800MHz Dual-Core | NXP

The NXP (formerly Freescale) BSC9131NSN1KHKB is a QorIQ Qonverge system-on-chip (SoC) integrating a 1 GHz StarCore SC3850 DSP core, a 1 GHz PowerPC e500 processor core, and a MAPLE-B2F baseband accelerator in a single 520-pin FCBGA (21x21 mm) package. It is part of the BSC9131 family targeting small-cell base stations, enterprise VoIP gateways, smart-grid infrastructure, military/defense radios, and industrial control applications. According to NXP product documentation, the device combines heterogeneous compute elements to handle both PHY-layer digital signal processing and control-plane networking tasks on one die. A QorIQ Qonverge SoC is a heterogeneous multiprocessor device that combines a general-purpose communications control CPU (PowerPC e500) with one or more DSP cores (StarCore) and dedicated hardware accelerators (such as MAPLE for LTE turbo/viterbi decoding) on a single chip. The QorIQ family sits within NXP's broader communications processor portfolio, which itself belongs to the wider class of embedded microprocessors and SoCs used in networking infrastructure. This category hierarchy matters because small-cell base stations increasingly demand deterministic DSP throughput alongside flexible L2/L3 packet processing, which single-core architectures cannot deliver efficiently. Key features of the BSC9131NSN1KHKB include: dual heterogeneous compute cores running at up to 1 GHz each, integrated MAPLE-B2F LTE baseband accelerator for PHY offload, DDR3 memory controller with ECC support, integrated flash controller (IFC) for NAND/NOR boot, and a wide range of high-speed serial interfaces (SerDes, PCIe, SGMII) for backhaul and radio connectivity. The device is rated for 0 C to 105 C ambient operation and is offered in the 520-FCBGA package suitable for industrial-grade base-station boards. The architecture pairs a 32-bit PowerPC e500 core (running control-plane protocols and Linux) with a 32-bit StarCore SC3850 VLIW DSP (running PHY DSP code), connected via a shared system bus. The MAPLE-B2F accelerator handles forward error correction, freeing DSP cycles for channel estimation, FFT, and modulation/demodulation. This partitioning reduces total power consumption versus discrete CPU+DSP+FPGA designs and simplifies board layout by eliminating inter-chip high-speed links. Typical applications include small-cell LTE/eNodeB base stations, enterprise VoIP media gateways, smart-grid control and monitoring equipment, military/defense tactical radio platforms, and industrial machine-to-machine gateways. The combination of deterministic DSP, control CPU, and on-chip LTE accelerator makes the BSC9131 family particularly suitable for compact, low-power small-cell designs where board area and BOM cost are at a premium. When designing with this device, engineers should pay attention to power-rail sequencing (the SoC requires multiple voltage domains with strict ramp order), DDR3 PCB layout (length-matched, impedance-controlled traces with proper decoupling), and thermal management at the 520-FCBGA top-side cooling solution. Note that this part is documented by NXP as End of Life, so long-lifecycle designs should evaluate remaining inventory and second-source options carefully. This page synthesizes distributor pricing, lifecycle status, and design considerations not found in any single manufacturer document, providing engineers and procurement teams with a consolidated reference for evaluating the BSC9131NSN1KHKB against modern alternatives.

見積もり お問い合わせ
BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors
BSC9131NSN7KHKB

BSC9131NSN7KHKB - 800MHz e500 SoC | NXP Semiconductors

The NXP Semiconductors BSC9131NSN7KHKB is a highly integrated QorIQ Qonverge network processor based on one 32-bit PowerPC e500 core operating at 800 MHz, packaged in a 520-FCBGA (21 x 21 mm). It also incorporates a StarCore SC3850 DSP at 1 GHz and a MAPLE-B2F specialist DSP accelerator, providing heterogeneous processing for demanding communications workloads. A QorIQ Qonverge SoC is a system-on-chip that integrates one or more processor cores, specialized accelerators, memory interfaces, and communications peripherals into a single package. In the broader semiconductor hierarchy, this device is a microprocessor and application-specific processor within the embedded computing and network-processing market. Its combination of general-purpose control, DSP, and hardware acceleration targets small-cell base stations, enterprise VoIP, smart-grid control, industrial equipment, and military or defense systems. The supplied product data identifies a single 32-bit e500 core, 800 MHz operation, a 1 GHz StarCore DSP, MAPLE-B2F acceleration, IFC, DDR3 support, and an operating temperature range of 0 to 105 C. These features allow software to partition networking, signal-processing, and control workloads across specialized engines instead of relying on a single general-purpose core. The FCBGA package supports dense integration but requires careful PCB layout, thermal management, and high-speed memory routing. The NXP product page identifies BSC9131NSN7KHKB as end of life, so new production availability is not expected. Procurement should therefore focus on factory-new inventory, traceability, and lifecycle risk rather than assuming a roadmap-backed supply. Its processor architecture and thermal characteristics must also be assessed against the original system requirements, especially DDR3 memory behavior, accelerator utilization, operating temperature, and long-term software maintenance. This processor is most appropriate when an existing Qonverge design already depends on the BSC9131's e500, StarCore, MAPLE-B2F, IFC, and DDR3 integration. New designs should evaluate whether an active processor family provides lower lifecycle risk and better long-term software support. For a direct physical substitution, the replacement must match the 520-FCBGA package, ball map, power architecture, memory interface, clocking, and software initialization sequence. The most important design check is the complete power and signal-integrity plan. Validate high-current core and I/O supplies with the manufacturer's recommended regulators and decoupling, route DDR3 as a length-matched topology, and control simultaneous switching across the complex SoC. Maintain the processor below its specified junction limits and use the manufacturer hardware-design guidance for thermal vias and exposed-package connections. This page combines verified manufacturer and distributor facts with lifecycle warnings, application guidance, procurement considerations, and the practical distinction between a true drop-in replacement and a merely functional alternative. It is intended to support engineering review and sourcing decisions without implying new-production availability for this end-of-life processor.

見積もり お問い合わせ
BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP
BSC9131NXE1KHKB

BSC9131NXE1KHKB - 800MHz 32-Bit Processor | NXP

The NXP Semiconductors BSC9131NXE1KHKB is an 800 MHz, 32-bit RISC microprocessor combining a Power Architecture e500 processor, StarCore SC3850 DSP, and MAPLE-B2F baseband acceleration in a 520-ball FCBGA package. According to the retrieved distributor data, the device is supplied in a tray, uses a 45 nm process, and targets small-cell base stations, enterprise VoIP, smart-grid control, military, defense, and industrial systems. A system-on-chip is an integrated semiconductor that combines a general-purpose processor, specialized digital signal processing, memory interfaces, security functions, and accelerator hardware. In the product hierarchy, this device belongs to the microprocessor and embedded processor market, rather than the discrete logic or analog IC categories. Its heterogeneous architecture allows control software and signal-processing workloads to share one package while retaining dedicated hardware for demanding communications tasks. The verified listing identifies one 32-bit e500 core operating at 800 MHz and an SC3850 signal processor. Other listings describe the BSC9131 family with 1 GHz e500 and StarCore processing, but those family-level frequencies are not substituted here for the exact target MPN. The part also includes MAPLE-B2F specialist DSP acceleration, DDR3 and DDR3L memory controllers, security processing, and no graphics acceleration according to the supplied datasheet-derived record. The exact target is identified as an industrial-temperature-grade component in a 520-terminal square FCBGA package. Package-ball layout and signal integrity are especially important because the device contains a high-performance processor subsystem, external-memory interfaces, and communications accelerators. Thermal design must account for the processing load and the package's thermal path, while firmware and board-support-package support must match the exact ordering code. Typical uses include LTE small-cell base stations, enterprise voice-over-IP equipment, smart-grid controllers, military and defense systems, and industrial embedded platforms. The integrated processor, DSP, and accelerator arrangement is valuable where control traffic, packet processing, and physical-layer signal processing must coexist in a compact system. Before committing a design, verify the exact 520-ball pinout, power rails, clock requirements, memory topology, boot configuration, and software support in the manufacturer documentation. Because the exact MPN is marked End of Life on NXP's product page, production planning should include lifecycle-risk review rather than treating remaining inventory as a permanent supply commitment. This page consolidates the exact MPN specifications, lifecycle information, observed distributor pricing, source links, and engineering constraints supplied for BSC9131NXE1KHKB. It also distinguishes exact-part data from broader BSC9131 family descriptions, avoiding unsupported substitution of related frequencies, package variants, or functions.

見積もり お問い合わせ