AD526BDZ vs AD526BD 比較
詳細な並列比較: AD526BDZ メーカー: Analog Devices および AD526BD メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD526BDZ | AD526BD |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Software-programmable gain amplifier | — |
| Number of Circuits | 1 circuit | — |
| Architecture | Single-ended monolithic SPGA | — |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | — |
| -3 dB Bandwidth | 4 MHz | — |
| Slew Rate | 24 V/µs | — |
| Input Bias Current | 50 pA | — |
| Input Offset Voltage | 250 µV | — |
| Supply Voltage Range | ±4.5 V to ±16.5 V | — |
| 動作温度範囲 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Gain-Control Interface | TTL-compatible latched inputs | — |
| External Components Required | 0 components | — |
| パッケージ | 16-CDIP | 16-CDIP |
| Packaging Type | Tube | — |
| ライフサイクル状態 | Active | — |
| 出力タイプ | [DATA_NEEDED: Output Type] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS Compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH Compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 Qualification] | [DATA_NEEDED: AEC-Q100 status] |
| Product Type | — | Single-ended monolithic software-programmable gain amplifier |
| Number of Channels | — | 1 circuit |
| Programmable Gain | — | 1, 2, 4, 8, or 16 |
| Maximum Programmable Gain | — | 16 V/V |
| Two-Chip Cascade Maximum Gain | — | 256 V/V |
| Gain Error, C Grade | — | 0.01% max |
| Gain Error, A Grade | — | 0.02% max |
| Gain Drift Over Temperature | — | 0.5 ppm/°C |
| Control Input Compatibility | — | TTL-compatible latched inputs |
| External Gain-Setting Components | — | 0 components |
| Internal Resistor Network | — | Included |
| Signal Polarity | — | Single-ended |
| Lead Count | — | 16 leads |
| 実装タイプ | — | Through-hole |
| 電源電圧 | — | [DATA_NEEDED: supply voltage range] |
| Settling Time | — | [DATA_NEEDED: settling time] |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |