AD623ANZ vs AD623ARMZ 比較

詳細な並列比較: AD623ANZ メーカー: Analog Devices および AD623ARMZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
AD623ANZ AD623ANZ - 8-Pin Instrumentation Amplifier | Analog Devices

AD623ANZ - 8-Pin Instrumentation Amplifier | Analog Devices

AD623ANZ ✓ 生産中

仕様比較

パラメータ AD623ANZ AD623ARMZ
ブランド Analog Devices Analog Devices
カテゴリ Amplifier ICs Amplifier ICs
ライフサイクル状態 有効 有効
Product Type Instrumentation amplifier Single-supply instrumentation amplifier (IN-AMP)
Number of Circuits 1 circuit —
Supply Voltage Range 2.7 V to 12 V 3 V to 12 V (2.7 V to 12 V per manufacturer product page)
Single-Supply Configuration 3 V to 12 V —
Dual-Supply Operation Supported —
Output Swing Rail-to-rail Rail-to-rail output
Gain Programming Single external gain-set resistor —
パッケージ 8-PDIP 8-lead MSOP (RM-8), surface mount
Lead Count 8 leads —
Input Signal Differential —
Common-Mode Handling Instrumentation-amplifier input —
Power Class Low-cost, low-power instrumentation amplifier —
Product Class Rail-to-rail instrumentation amplifier —
Pin Configuration Industry-standard 8-lead instrumentation-amplifier configuration 8-lead industry-standard in-amp pinout
RoHS ステータス Unknown —
REACH Status Unknown Unaffected
AEC-Q100 Qualification Not applicable —
動作温度範囲 [DATA_NEEDED: operating temperature range] -40 C to +85 C
Gain Bandwidth [DATA_NEEDED: gain bandwidth] —
Input Noise Density [DATA_NEEDED: input noise density] [DATA_NEEDED: input noise density in nV/rt-Hz]
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Number of Channels — 1 channel
Gain Range — 1 to 1000, set by a single external resistor
3 dB Bandwidth (G = 1) — 800 kHz
Slew Rate — 300 mV/us
REF Pin Function — Output reference / offset input
MSL — MSL 1 (unlimited floor life)
RoHS Compliance — RoHS3 compliant
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Input Offset Voltage — [DATA_NEEDED: input offset voltage, typical and maximum]
CMRR — [DATA_NEEDED: CMRR at G = 1 and G = 100]
電源電流 — [DATA_NEEDED: quiescent supply current]
Power Supply Rejection — [DATA_NEEDED: PSRR at G = 1]
Gain Error — [DATA_NEEDED: gain error at G = 1]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼