AD676KN vs AD676JN 比較
詳細な並列比較: AD676KN メーカー: Analog Devices および AD676JN メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD676KN | AD676JN |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | ラストバイ |
| 分解能 | 16 bit | — |
| Input Count | 1 input | — |
| Conversion Architecture | Successive approximation (SAR) | — |
| Internal Architecture | Switched-capacitor charge redistribution | — |
| サンプリングレート | 100 kSPS | 100 kSPS |
| Total Conversion Time | 10 µs | — |
| Output Interface | 16-bit parallel output | — |
| パッケージ | 28-pin plastic DIP (28-PDIP) | 28-pin PDIP (Plastic DIP, 0.600 inch / 15.24 mm) |
| Package Body Width | 0.600 in (15.24 mm) | — |
| 実装タイプ | Through-hole | Through-Hole (DIP) |
| Temperature Grade | Commercial | — |
| 動作温度 | 0 °C to +70 °C | 0 C to +70 C |
| Sample-and-Hold Function | On-chip | — |
| Autocalibration | Yes | On-chip, automatic on power-up and on CAL command |
| Missing Codes | No missing codes | — |
| Full-Power Bandwidth | 1 MHz | — |
| Signal-to-Noise Plus Distortion | 90 dB | — |
| Total Harmonic Distortion | 97 dB | — |
| Integral Nonlinearity | 1 LSB | — |
| Analog Supply | +15 V | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Bits | — | 16 |
| Conversion Time | — | 10 us |
| Architecture | — | SAR (Successive Approximation Register) |
| Input Channels | — | 1 single-ended |
| Data Interface | — | Parallel (16-bit) |
| Input Type | — | Single-Ended, unipolar or bipolar (pin-strapped) |
| Integral Nonlinearity (INL) | — | 1 LSB max (no missing codes) |
| Total Harmonic Distortion (THD) | — | -97 dB |
| Signal-to-Noise Ratio (SNR) | — | 90 dB |
| Packaging | — | Tube |
| Sample-and-Hold | — | On-chip |