AD876JR vs AD876AR 比較
詳細な並列比較: AD876JR メーカー: Analog Devices および AD876AR メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD876JR | AD876AR |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | ラストバイ | ラストバイ |
| ADC Type | 10-bit sampling ADC | — |
| 分解能 | 10 bit | 10 bit |
| サンプリングレート | 20 MSPS | 20 MSPS |
| Input Count | 1 input | — |
| Architecture | Pipelined | — |
| Power Dissipation | 160 mW | 160 mW |
| 電源電圧 | +5 V | — |
| Process Technology | CMOS | — |
| Differential Nonlinearity | 0.5 LSB guaranteed | 0.5 LSB guaranteed |
| Missing Codes | No missing codes guaranteed | No missing codes guaranteed |
| Power-Down Mode | Standby mode | Standby |
| Digital Output State | Three-state outputs | — |
| Digital Input/Output | Three-state digital I/O | — |
| Upgrade Path | Pin-compatible eight-bit layout upgrade to 10-bit resolution | — |
| Maximum Series Input Resistor | 200 ohm or less | — |
| Series Resistor Guidance | May increase proportionally for signal bandwidths below 10 MHz | — |
| パッケージ | 28-SOIC | [DATA_NEEDED: exact package designation and dimensions] |
| 実装タイプ | Surface mount | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Converter Type | — | 10-bit CMOS sampling analog-to-digital converter |
| Input Sample-and-Hold Amplifier | — | On-chip |
| Supply Configuration | — | +5 V single supply |
| Digital Output Control | — | Three-state |
| Resolution Upgrade Path | — | 8-bit layout to 10-bit implementation |
| Input Series Resistance Recommendation | — | 200 ohm or less |
| Signal Bandwidth Guidance | — | Below 10 MHz permits proportionally increased series resistance |
| Technology | — | CMOS |
| ライフサイクル状態 | — | Last time buy |
| 入力電圧範囲 | — | [DATA_NEEDED: analog input voltage range] |
| Digital Output Format | — | [DATA_NEEDED: digital output coding and interface format] |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |