AD974BR vs AD974BRSZ 比較
詳細な並列比較: AD974BR メーカー: Analog Devices および AD974BRSZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD974BR | AD974BRSZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Four-channel data acquisition system with serial interface | 4-channel data-acquisition ADC |
| ADC Resolution | 16 bit | — |
| Sampling Throughput | 200 kSPS | — |
| Number of Analog Input Channels | 4 channels | 4 channels |
| Input Type | Single-ended analog input | — |
| Supported Input Range 1 | 0 V to +4 V | — |
| Supported Input Range 2 | 0 V to +5 V | — |
| Supported Input Range 3 | ±10 V | — |
| 電源電圧 | +5 V single supply | 5 V |
| Internal Reference | +2.5 V | — |
| Reference Selection | External or internal reference | — |
| Clock | On-chip clock | — |
| Conversion Architecture | Successive-approximation switched-capacitor ADC | — |
| Digital Interface | High-speed serial interface | Serial interface |
| Power-Down Mode | Supported | Yes |
| Maximum Power Dissipation | 120 mW | — |
| パッケージ | 28-SOIC | 28-pin SSOP |
| Package Width | 7.50 mm | — |
| 実装タイプ | Surface mount | Surface mount |
| 分解能 | — | 16 bit |
| Maximum Sampling Rate | — | 200 ksps |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Internal Reference Voltage | — | 2.5 V |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| RoHS ステータス | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |