ADF4106BRU vs ADF4193BCPZ 比較
詳細な並列比較: ADF4106BRU メーカー: Analog Devices および ADF4193BCPZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
ADF4193BCPZ - 3.5 GHz Fast-Settling PLL Synthesizer | Analog Devices
ADF4193BCPZ ✓ 生産中仕様比較
| パラメータ | ADF4106BRU | ADF4193BCPZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Clock & Timing | Clock & Timing |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Integer-N PLL frequency synthesizer | — |
| Maximum Synthesizer Frequency | 6.0 GHz | — |
| Minimum Reference Input Frequency | 20 MHz | — |
| Number of Circuits | 1 | — |
| Architecture | Integer-N | — |
| Power-Supply Voltage | 3.3 V | — |
| Charge-Pump Supply | Separate VP supply | — |
| Prescaler | Programmable dual-modulus P/(P+1) | — |
| Reference Divider | Programmable | — |
| A Counter | 6-bit programmable counter | — |
| B Counter | Programmable counter | — |
| Charge-Pump Current | Programmable | — |
| Anti-Backlash Pulse Width | Programmable | — |
| Serial Interface | 3-wire serial interface | — |
| パッケージ | 16-pin TSSOP, 0.173 inch / 4.40 mm width | 32-lead WFQFN with exposed pad |
| 実装タイプ | Surface mount | Surface mount |
| RoHS ステータス | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Device Type | — | RF PLL frequency synthesizer |
| Maximum RF Input Frequency | — | 3.5 GHz |
| Minimum RF Input Frequency | — | 300 MHz |
| Maximum Output Frequency | — | 470 MHz |
| Output Channel Count | — | 1 |
| 動作温度範囲 | — | -40°C to +85°C |
| Phase Detector Type | — | Low-noise digital phase-frequency detector |
| Charge Pump Type | — | Precision differential charge pump |
| Loop Architecture | — | Dual-band narrow-band and wide-band operation |
| Control Interface | — | [DATA_NEEDED: serial interface type and electrical protocol] |
| Supply Voltage Range | — | [DATA_NEEDED: analog and digital supply voltage ranges] |
| Reference Input Frequency Range | — | [DATA_NEEDED: reference input frequency range] |
| Phase Noise | — | [DATA_NEEDED: phase noise versus offset frequency] |
| Lock Time | — | [DATA_NEEDED: lock time and test conditions] |
| Reference Spur | — | [DATA_NEEDED: reference spur level and test conditions] |
| RF Output Power | — | [DATA_NEEDED: RF output power and load condition] |
| Integrated Reference Divider | — | [DATA_NEEDED: reference divider ratio range] |
| Exposed Thermal Pad | — | Present |