ADG1206YCPZ-REEL7 vs ADG1207YCPZ 比較
詳細な並列比較: ADG1206YCPZ-REEL7 メーカー: Analog Devices および ADG1207YCPZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ADG1206YCPZ-REEL7 | ADG1207YCPZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $12.14 | $4.18 |
| Configuration | 1 Circuit, Single 16:1 Multiplexer | — |
| On-Resistance (Ron) Max | 200 Ω | — |
| On-Capacitance (Typ) | 13 pF | — |
| -3 dB Bandwidth | 490 MHz | — |
| Turn-On Time (tON Typ) | 75 ns | — |
| Turn-Off Time (tOFF Typ) | 85 ns | — |
| Charge Injection | Ultralow (typically < 1 pC) | <1 pC over full signal range |
| Dual-Supply Operation | ±15 V (analog signal range) | — |
| Single-Supply Operation | +12 V (logic-compatible) | — |
| Process Technology | iCMOS (high-voltage CMOS + bipolar + DMOS) | iCMOS (high-voltage CMOS) |
| Address Lines | 4-bit binary (A0, A1, A2, A3) | A0, A1, A2 (3-bit binary) |
| ESD Protection (HBM, Analog Inputs) | > 4 kV HBM | — |
| 動作温度範囲 | -40 °C to +125 °C | -40C to +125C |
| パッケージ | 32-LFCSP-WQ (5 mm × 5 mm) with EP | 32-lead LFCSP-WQ (5x5 mm) |
| 実装タイプ | Surface Mount | Surface Mount |
| MSL (Moisture Sensitivity Level) | 3 (per JEDEC J-STD-020) | — |
| Lead-Free / RoHS | Yes / Compliant | — |
| Quiescent Power Dissipation | Ultralow (iCMOS process) | — |
| Multiplexer Configuration | — | Differential 8:1 (2-circuit) |
| Number of Channels | — | 8 differential |
| On-Resistance (Ron) | — | 200 ohm (typical) |
| Off Capacitance (Coff) | — | 1.5 pF (typical) |
| Supply Voltage Range (Dual) | — | ±5 V to ±15 V |
| Supply Voltage Range (Single) | — | 12 V typical, up to 33 V total |
| Analog Signal Range | — | Rail-to-rail |
| Logic Compatibility | — | 3 V TTL/CMOS-compatible |
| Switching Action | — | Break-before-make |
| RoHS ステータス | — | Compliant |
| Channel-to-Channel Crosstalk | — | [DATA_NEEDED: crosstalk spec in dB at frequency] |
| Turn-On Time (tON) | — | [DATA_NEEDED: tON spec in ns] |