ADM232LJNZ vs ADM232AAN 比較
詳細な並列比較: ADM232LJNZ メーカー: Analog Devices および ADM232AAN メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ADM232LJNZ | ADM232AAN |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Device Type | RS-232 transceiver | — |
| Driver and Receiver Configuration | 2 drivers and 2 receivers | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Logic Technology | 5 V CMOS | — |
| Maximum Data Rate | 100 kbps | — |
| Interface Standard | RS-232 | — |
| Supported Signaling Standards | EIA-232-E and V.28 | — |
| ピン数 | 16 pins | — |
| パッケージ | 16-pin PDIP | 16-lead plastic DIP |
| 実装タイプ | Through-hole | Through-hole |
| Production Status | Production | — |
| Negative Supply Requirement | Not required at the device interface | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 静止電流 | [DATA_NEEDED: quiescent current] | — |
| External Charge-Pump Capacitors | [DATA_NEEDED: charge-pump capacitor count and values] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Dual RS-232 line-driver and line-receiver transceiver |
| Transmission Rate | — | 200 kB/s |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| 電源電圧 | — | 5 V |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Driver Output Swing | — | ±9 V with 5 V supply |
| Receiver Input Levels | — | ±30 V |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Internal Supply Conversion | — | On-board DC-DC converters |
| Pin Compatibility | — | Compatible with MAX222, MAX232A, and MAX242 pin arrangements |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| Standard Packaging Quantity | — | [DATA_NEEDED: standard packaging quantity] |