ADM232LJRZ vs MAX232ACSE+T 比較
詳細な並列比較: ADM232LJRZ メーカー: Analog Devices および MAX232ACSE+T メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX232ACSE+T - 5V RS-232 Transceiver, 2 Driver/2 Receiver | Maxim Integrated
MAX232ACSE+T ✓ 生産中仕様比較
| パラメータ | ADM232LJRZ | MAX232ACSE+T |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Transceiver Configuration | 2 drivers / 2 receivers | — |
| インターフェースタイプ | Full-duplex RS-232 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 120 kbps | — |
| Transmitter Output Swing | ±9 V from a 5 V supply | — |
| Charge-Pump Capacitor Value | 1 µF | — |
| Protocol Compliance | EIA-232-E and V.28 | — |
| パッケージ | 16-pin SOIC, 7.50 mm width | 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width) |
| 実装タイプ | Surface mount | Surface Mount |
| Shipping Packaging | Tube | — |
| On-Board DC-to-DC Converter | Yes | — |
| Logic Compatibility | CMOS | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| 機能 | — | RS-232 Transceiver (2 Driver / 2 Receiver) |
| データレート | — | 200 kbps |
| 電源電圧 | — | 4.5 V to 5.5 V |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Duplex | — | Full |
| Receiver Input Voltage Range | — | ±30 V (HBM ESD tolerance on RS-232 inputs) |
| 動作温度 | — | 0 °C to +70 °C (C grade) |
| Charge Pump Capacitors | — | 4 x 0.1 µF external (typical) |
| Shutdown Mode | — | Yes (active-low, device-dependent) |
| MSLレベル | — | [DATA_NEEDED: MSL level] |
| Packaging | — | Tape & Reel (+T suffix) |