ADM483JRZ vs ADM483ARZ 比較

詳細な並列比較: ADM483JRZ メーカー: Analog Devices および ADM483ARZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ ADM483JRZ ADM483ARZ
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Product Type RS-485/RS-422 differential line transceiver —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
電源電圧 4.75 V to 5.25 V 5 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 250 kbps 250 kbps
Duplex Mode Half-duplex Half-duplex
Supported Protocols EIA RS-485 and EIA RS-422 —
Bus Common-Mode Range -7 V to +12 V -7 V to +12 V
Shutdown Supply Current 100 nA 100 nA
Operating Supply Current 120 µA —
Maximum Transceivers per Bus 32 transceivers —
Output Behavior When Disabled High impedance —
Driver Edge Control Slew-rate limited —
Protection Features Thermal shutdown and short-circuit protection Thermal shutdown and short-circuit protection
動作温度範囲 -40 °C to +85 °C -40°C to +85°C
パッケージ 8-SOIC, 0.154 in (3.90 mm) body width 8-pin SOIC, 0.154 inch body width, 3.90 mm width
実装タイプ Surface mount Surface mount
Packaging Tube —
RoHS ステータス [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Supported Standards — EIA RS-485 and EIA RS-422
Driver and Receiver Count — 1 differential driver and 1 differential receiver
電源電流 — 120 uA
Maximum Transceivers Per Bus — 32 transceivers
Driver Output State — High impedance when disabled or powered off
Slew Rate — Slew-rate limited
Compliance Standards — EIA RS-485 and EIA RS-422
ライフサイクル状態 — Production

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼