ADS7841PBG4 vs ADS7841P 比較
詳細な並列比較: ADS7841PBG4 メーカー: Texas Instruments および ADS7841P メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ADS7841PBG4 | ADS7841P |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | 有効 |
| 分解能 | 12 bits (programmable to 8 bits) | 12 bits; programmable to 8 bits |
| Number of Input Channels | 4 single-ended or 2 differential | 4 channels |
| Architecture | SAR (Successive Approximation) | — |
| サンプリングレート | 200 kSPS | — |
| Conversion Time | 3.75 us | — |
| Data Interface | Serial (SPI/QSPI/MICROWIRE-compatible) | — |
| INL (Max) | +/-1 LSB | — |
| DNL (Max) | +/-1 LSB | — |
| SINAD | 72 dB | — |
| Missing Codes | None (guaranteed) | — |
| 電源電圧 | 2.7 V to 5.5 V (single supply) | — |
| Reference Voltage (VREF) | 100 mV to VCC | — |
| Analog Input Range | 0 V to VREF | — |
| Power Dissipation (Typ, 200 kHz, VCC=5V) | 2 mW | — |
| シャットダウン電流 | < 1 uA | — |
| 動作温度 | -40 C to +85 C (industrial) | — |
| パッケージ | 16-PDIP (0.300 in, 7.62 mm) | 16-pin PDIP, 0.300 inch, 7.62 mm |
| 実装タイプ | Through-Hole | Through-hole |
| MSLレベル | 1 (unlimited) | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Converter Type | — | Successive-approximation register (SAR) ADC |
| Throughput Rate | — | 200 kSPS |
| Supply Voltage Range | — | 2.7 V to 5.25 V |
| Reference Voltage Range | — | 100 mV to VCC |
| Analog Input Voltage Range | — | 0 V to VREF |
| Typical Power Dissipation | — | 2 mW at 200 kHz throughput and 5 V supply |
| Output Interface | — | Synchronous serial interface |
| Internal Conversion Engine | — | 1 SAR converter |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| 入力容量 | — | [DATA_NEEDED: input capacitance] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Offset Error | — | [DATA_NEEDED: offset error] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Analog Input Type | — | Single-ended, multiplexed |
| REACH Status | — | [DATA_NEEDED: REACH status] |