ATMEGA64L-8AU vs ATMEGA64-16AU 比較

詳細な並列比較: ATMEGA64L-8AU メーカー: Microchip Technology および ATMEGA64-16AU メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Microchip Technology
ATMEGA64L-8AU ATMEGA64L-8AU - 8-bit AVR MCU, 64KB Flash, 8MHz | Microchip

ATMEGA64L-8AU - 8-bit AVR MCU, 64KB Flash, 8MHz | Microchip

ATMEGA64L-8AU ✓ 生産中
Microchip Technology
ATMEGA64-16AU ATMEGA64-16AU - 8-bit AVR MCU 64KB Flash 16MHz | Microchip

ATMEGA64-16AU - 8-bit AVR MCU 64KB Flash 16MHz | Microchip

ATMEGA64-16AU ✓ 生産中

仕様比較

パラメータ ATMEGA64L-8AU ATMEGA64-16AU
ブランド Microchip Technology Microchip Technology
カテゴリ Microcontrollers Microcontrollers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $4.55 $7.23
Core Processor AVR —
Core Size 8-Bit —
Architecture AVR enhanced RISC, 130 instructions —
Speed 8 MHz —
Flash Memory 64KB (32K x 16) In-System Programmable —
EEPROM 2KB 2 KB
SRAM 4KB 4 KB
Operating Voltage Range 2.7 V to 5.5 V —
General Purpose I/O 53 lines —
ADC 8-channel, 10-bit 8-channel, 10-bit
Timers/Counters 4 (with compare modes and PWM) —
USART 2 —
Serial Interfaces TWI (I2C-compatible), SPI, 2x USART —
JTAG Yes (boundary scan, on-chip debug) —
RTC Real Time Counter with separate oscillator —
パッケージ 64-TQFP (14x14 mm) 64-TQFP (14x14 mm, 0.8 mm pitch)
実装タイプ Surface Mount Surface Mount
Lifecycle Note Mature product, not recommended for new designs; replaced by ATmega64A —
Core Architecture — 8-bit AVR RISC
Program Memory Size — 64 KB Flash (32K x 16)
Flash Endurance — 10,000 write/erase cycles
Maximum CPU Speed — 16 MHz
Throughput — Up to 16 MIPS at 16 MHz
General Purpose I/O Pins — 53
General Purpose Working Registers — 32
Operating Voltage — 4.5 V to 5.5 V (16 MHz); 2.7 V to 5.5 V (8 MHz)
Timer/Counters — 4 (two 8-bit, two 16-bit) with compare modes and PWM
USART Interfaces — 2
Two-wire Serial Interface — 1 (byte oriented)
Real Time Counter — Yes (RTC)
動作温度 — -40 C to +85 C
RoHS ステータス — Compliant (GREEN)
JTAG Debug Interface — Yes (IEEE 1149.1 boundary-scan)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼