ATSAM4L-XSTK vs ATSAMA5D2C-XULT 比較
詳細な並列比較: ATSAM4L-XSTK メーカー: Microchip Technology および ATSAMA5D2C-XULT メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT Obsolete仕様比較
| パラメータ | ATSAM4L-XSTK | ATSAMA5D2C-XULT |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Development Boards |
| ライフサイクル状態 | 有効 | Obsolete |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.00 | $184.50 |
| Product Type | MCU 32-bit Embedded Evaluation Board (Starter Kit) | Embedded MPU Evaluation Board |
| Kit Family | SAM4L Xplained Pro Starter Kit | — |
| Target MCU Family | ATSAM4L (AT91SAM4 / SAM4L series) | — |
| Core Processor | ARM Cortex-M4, 32-bit | ARM Cortex-A5 (SAMA5D2) |
| Core Frequency | up to 48 MHz | — |
| Active Mode Current | down to 90 uA/MHz (SAM4L MCU) | — |
| Sleep Mode | Full RAM retention (SAM4L MCU) | — |
| Display Controller | Segment LCD controller (SAM4L series) | — |
| On-board Debugger | EDBG (CMSIS-DAP, Virtual COM, Data Gateway) | Embedded J-Link OB |
| Expansion | Xplained Pro extension headers | — |
| Supported IDE | Atmel Studio / Microchip Studio, Atmel START | — |
| Instruction Set | ARM (Thumb-2) | — |
| 実装タイプ | Standalone benchtop development board | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| 電源電圧 | [DATA_NEEDED: supply voltage] | — |
| Series | — | AT91SAMA5 / SAMA5D2 Xplained Ultra |
| Core Architecture | — | 32-bit MPU |
| Maximum CPU Frequency | — | 500 MHz |
| On-board DRAM | — | 128 MB DDR2 SDRAM (1 Gbit) |
| On-board Flash | — | 32 MB QSPI NOR Flash (256 Mbit) |
| Ethernet | — | 10/100 Mbit with on-board PHY |
| USB | — | 2x USB 2.0 High-Speed (Host/Device) |
| Card Slot | — | 1x microSD |
| Display Interface | — | Parallel LCD connector (up to 4.3") |
| Audio | — | Line In / Line Out (on-board codec) |
| CAN | — | 2x CAN-FD |
| Expansion Headers | — | Arduino, RPi, MikroElektronika Click |
| Input Voltage | — | 5 V (USB DEBUG or external supply) |
| Packaging | — | Bulk (Box) |
| Product Status | — | Obsolete (per Octopart listing) |