ATSAMA5D2C-XULT vs ATSAM4L-XSTK 比較
詳細な並列比較: ATSAMA5D2C-XULT メーカー: Microchip Technology および ATSAM4L-XSTK メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMA5D2C-XULT - SAMA5D2 Xplained Ultra ARM Cortex-A5 MPU Evaluation Kit | Microchip
ATSAMA5D2C-XULT Obsolete仕様比較
| パラメータ | ATSAMA5D2C-XULT | ATSAM4L-XSTK |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Development Boards | Development Boards |
| ライフサイクル状態 | Obsolete | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $184.50 | $0.00 |
| Product Type | Embedded MPU Evaluation Board | MCU 32-bit Embedded Evaluation Board (Starter Kit) |
| Series | AT91SAMA5 / SAMA5D2 Xplained Ultra | — |
| Core Processor | ARM Cortex-A5 (SAMA5D2) | ARM Cortex-M4, 32-bit |
| Core Architecture | 32-bit MPU | — |
| Maximum CPU Frequency | 500 MHz | — |
| On-board DRAM | 128 MB DDR2 SDRAM (1 Gbit) | — |
| On-board Flash | 32 MB QSPI NOR Flash (256 Mbit) | — |
| Ethernet | 10/100 Mbit with on-board PHY | — |
| USB | 2x USB 2.0 High-Speed (Host/Device) | — |
| Card Slot | 1x microSD | — |
| Display Interface | Parallel LCD connector (up to 4.3") | — |
| Audio | Line In / Line Out (on-board codec) | — |
| CAN | 2x CAN-FD | — |
| On-board Debugger | Embedded J-Link OB | EDBG (CMSIS-DAP, Virtual COM, Data Gateway) |
| Expansion Headers | Arduino, RPi, MikroElektronika Click | — |
| Input Voltage | 5 V (USB DEBUG or external supply) | — |
| Packaging | Bulk (Box) | — |
| Product Status | Obsolete (per Octopart listing) | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status] |
| Kit Family | — | SAM4L Xplained Pro Starter Kit |
| Target MCU Family | — | ATSAM4L (AT91SAM4 / SAM4L series) |
| Core Frequency | — | up to 48 MHz |
| Active Mode Current | — | down to 90 uA/MHz (SAM4L MCU) |
| Sleep Mode | — | Full RAM retention (SAM4L MCU) |
| Display Controller | — | Segment LCD controller (SAM4L series) |
| Expansion | — | Xplained Pro extension headers |
| Supported IDE | — | Atmel Studio / Microchip Studio, Atmel START |
| Instruction Set | — | ARM (Thumb-2) |
| 実装タイプ | — | Standalone benchtop development board |
| 動作温度 | — | [DATA_NEEDED: operating temperature range] |
| 電源電圧 | — | [DATA_NEEDED: supply voltage] |